md cesh400 d0e

103

Upload: marko-lovric

Post on 07-Nov-2015

232 views

Category:

Documents


11 download

DESCRIPTION

Mori Seiki Manuals MH400

TRANSCRIPT

  • PREFACESIGNAL WORD DEFINITIONCONTENTS1. GENERAL VIEW2. INSTALLATION DRAWINGS2.1 Standard2.1.1 6-station Circular Type Pallet Changer Specification2.1.2 8-station Circular Type Pallet Changer Specification

    2.2 Drum Filter Conveyor Specification2.2.1 2-station APC, 40-tool Specification2.2.2 3-station APC, 40-tool Specification2.2.3 Automatic Door, 40-tool Specification2.2.4 6-station Circular Type Pallet Changer Specification2.2.5 8-station Circular Type Pallet Changer Specification2.2.6 Rear Disposal Type Chip Conveyor Specification (drum filter type)

    3. FOUNDATION DIAGRAMS3.1 Standard3.2 6-station Circular Type Pallet Changer Specification3.3 8-station Circular Type Pallet Changer Specification3.4 Linear Pallet Changer Specification3.5 High Speed Specification

    4. DISASSEMBLY DIAGRAM5. SPINDLE SPEED OUTPUT DIAGRAMS5.1 Standard5.2 20000 min-1 Specification

    6. INTERFERENCE BETWEEN TOOL AND WORKPIECE7. AXIS TRAVEL DIAGRAM8. TOOL SHANK DIMENSIONS8.1 MAS8.1.1 No. 40 taper

    8.2 CAT8.2.1 No. 40 taper

    9. RETENTION KNOB DIMENSIONS9.1 Tables of Retention Knob9.2 MAS Mori 909.2.1 No. 40 taper

    9.3 CAT Mori 909.3.1 No. 40 taper

    9.4 Cautions on Using Retention Knob

    10. TOOL RESTRICTIONS11. PALLET DIMENSIONS12. FOUR-SIDE CLAMPING BLOCK DIMENSIONS12.1 [ ]400 (for metric)12.2 [ ]400 (for inch)

    13. MOUNTABLE ACCESSORIES OF SPINDLE HEAD14. SLIDEWAY LUBRICATION PUMP DIAGRAM15. SPINDLE BEARING LUBRICATION PUMP DIAGRAM16. COOLANT PUMP DIAGRAMS16.1 20VMPB7/8-61.116.2 CHK4-50/2

    17. CHARGE TANK (for oil shot, oil mist)18. HYDRAULIC UNIT DIAGRAMS18.1 Hydraulic Circuit Diagrams18.2 General View and Specifications of Hydraulic Unit18.2.1 Standard18.2.2 Auto-coupler Specification

    18.3 General View and Specifications of Valve Unit for Spindle Tool, Pallet, and Table Clamp / Unclamp18.3.1 Standard18.3.2 Full 4th Axis Rotary Table Specification

    18.4 General View and Specifications of Valve Unit for APC Arm Up / Down18.5 General View and Specifications of Valve Unit for Jig Clamp / Unclamp

    19. PNEUMATIC CIRCUIT DIAGRAM20. PNEUMATIC UNIT MOUNTING PANEL DIAGRAM21. OIL COOLER DIAGRAMS21.1 HCFC21.2 HFC21.3 Through-spindle Coolant Cooling Unit21.4 Column Cooling Unit

    Comment FormAPPENDIX CONVERSION TABLE OF UNITS