max14819 evaluation kit evaluates: max14819
TRANSCRIPT
Evaluates: MAX14819MAX14819 Evaluation Kit
General DescriptionThe MAX14819 evaluation kit (EV kit) consists of the evaluation board and software. The EV kit is a fully assembled and tested circuit board that evaluates the MAX14819 IO-Link® dual-channel master transceiver.The EV kit includes Windows® 7-compatible software that provides a graphical user interface (GUI) for exercising the features of the device. The EV kit is connected to a PC through a USB A-to- micro B cable.
Features ● IO-Link-Compliant Device Transceiver ● IO and SPI Interface Terminals ● Windows 7-Compatible Software ● USB-PC Connection ● Proven PCB Layout ● Fully Assembled and Tested
Ordering Information appears at end of data sheet.
319-100003; Rev 0; 3/17
IO-Link is a registered trademark of Profibus User Organization (PNO). Windows, Windows XP, and Windows Vista are registered trademarks and registered service marks of Microsoft Corporation.
Quick StartRecommended Equipment• MAX14819 EV kit (USB A-to-B cable included)• User-supplied Windows 7 PC with a spare USB port• 24V, 1A DC power supply*• Multimeter/voltmeter*L+A and L+B are each configured for a 1A (typ) current limit, so a higher load-capable power supply may be required for testing.Note: In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software. Text in bold and underlined refers to items from the Windows operating system.
ProcedureThe EV kit is fully assembled and tested. Follow the steps below to verify board operation before exercising the full features of the device:1) Visit www.maximintegrated.com/evkitsoftware to
download the latest version of the EV kit software, MAX14819EVKITSetupVx.xx.ZIP. Save the EV kit software to a temporary folder and uncompress the ZIP file.
USB
FTDI USB-TO-SPI
ISOLATION
SWITCH
MAX14819 EV KIT
MAX14819
CHANNEL BCHANNEL A
L+A SUPPLY LINE FETs
L+B SUPPLY LINE FETs
SPI LINES
ADDRESS SELECTION
LEDsLEDs
TESTPOINTS
MAX14819 EV Kit Block Diagram
Maxim Integrated │ 2www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
2) Install the EV kit software and USB driver on your computer by running the MAX14819EVKITSetupVx.xx.EXE program inside the temporary folder. The program files are copied to your PC and icons are created in the Windows Start | Programs | Maxim Integrated menu. During software installation, some versions of Windows may show a warning message indicating that this software is from an unknown publisher. This is not an error condition and it is safe to proceed with installation. Administrator privileges are required to install the USB device driver on Windows.
3) Verify that all the jumpers are in their default positions, as shown in Table 1.
4) Connect the 24V DC power supply on the VCC and GND connectors on the EV kit board.
5) Connect the multimeter to the V5 testpoint (TP22)6) Connect the USB cable from the PC to the EV kit
board. A Windows message appears when connecting the EV kit board to the PC for the first time. Each version of Windows has a slightly different message. If you see a Windows message stating ready to use, then proceed to the next step.
7) Start the EV kit software by opening its icon in the Windows Start | Programs | Maxim Integrated menu. The EV kit software main window appears, as shown in Figure 1.
8) Verify that Status: MAX14819EVKIT A Connected is displayed on the status bar at the bottom of the main window (Figure 1).
9) Turn on the 24V supply. Ensure that the V5 voltage (TP22) is 5V.
10) Click on the Read All button to read all of the registers in the device.
11) Select a register in the register table to access the bits in that register by clicking on the register name.
12) Using the Register Bit Description table that pops up, set the individual bits by selecting the required setting from the drop-down menu for each bit.
13) Press the Write Changes button on the GUI to write the registers that have been changed to the MAX14819.
Detailed Description of SoftwareConfiguring the RegistersClick on a register name in the register table to access the individual bits in that register. When the register name is selected in the register table, a corresponding Register Bit Description table appears, allowing access to set individual bits. Click on the drop-down menu next to each bit in the Register Bit Description table to select the bit
setting. When all of the bits are set as desired, click on the Write Changes button to write the changed bit setting s to the MAX14819 over the SPI interface.Note that full IO-Link communication is not available using the EV kit GUI. Please use the MAXREFDES145 for full IO-Link communication with the MAX14819.
Interrupt Response (IRQ)The MAX14819 features an integrated active-low interrupt indicator pin to actively notify the controller when an interrupt or error condition occurs. Enable interrupts in the by setting the bits in the InterruptEn register.When an interrupt is triggered, the IRQ bit in the SPI communication is set and the IRQ in the SPI Response box of the GUI turns red. On the EV kit PCB, the IRQ LED (DS6) also turns on.
Detailed Description of HardwareThe MAX14819 EV kit includes the MAX14819 dual-channel IO-Link master transceiver and the external components for evaluating the device. All logic-level I/Os and IO-Link capable I/Os are available on yellow test points.Logic-Level Power Supply The MAX14819 features an internal 5V linear regulator which can drive loads up to 20mA. When REGEN is unconnected, this 5V output is available on the V5 test point (TP22). Leave J13 open and close the J5 jumper to use this internal 5V regulator to power the logic level supply (VL).To use a different logic-level voltage supply, open the J5 jumper and apply the external supply to the VL testpoint (TP23). Selecting the Device AddressThe MAX14819 includes two address pins for SPI addressing, allowing up to four devices on a single bus. Set the SPI address for the MAX14819 on the MAX14819EVKIT by setting the A1 and A0 jumpers (J11 and J12, respectively). Set the device SPI address in the GUI to the same value by selecting the corresponding address in the drop-down menu in the SPI Address box.
Using SPI Interface with an External Master Controller The MAX14819 EV kit includes an isolated USB-to-SPI interface circuit for communication with the PC/GUI.To use an external SPI master controller with the MAX14819, open all of the channels on SW1, and con-nect an the external SPI master to the J20 header. Note that the J20 header is not isolated from the MAX14819.
Maxim Integrated │ 3www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
Figure 1. MAX14819 EV Kit Software, EV Kit is Connected
Figure 2. MAX14819 EV Kit Software, Register Bit Description Table
Maxim Integrated │ 4www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
*Default position.
Table 1. Jumper Descriptions
#Denotes RoHS compliant.
JUMPER SHUNT POSITON DESCRIPTION
J5Open VL is powered by an external supply. Apply an external voltage to the VL test point
for normal operation.Closed* VL is connected to V5.
J6Open IRQ is not pulled to VL through an LED
Closed* IRQ is pulled up to VL through an LED
J7Open RXRDYA/LD1A is not pulled to VL through an LED
Closed* RXRDYA/LD1A is pulled up to VL through an LED
J8Open RXERRA/LD2A is not pulled to VL through an LED
Closed* RXERRA/LD2A is pulled up to VL through an LED
J9Open RXERRB/LD2B is not pulled to VL through an LED
Closed* RXERRB/LD2B is pulled up to VL through an LED
J10Open RXRDYB/LD1B is not pulled to VL through an LED
Closed* RXRDYB/LD1B is pulled up to VL through an LED
J111-2 A1 is connected to VL (high). Chip address pin A1 is 1.2-3* A1 is connected to GND (low). Chip address pin A1 is 0.
J121-2 A0 is connected to VL (high). Chip address pin A0 is 1.2-3* A0 is connected to GND (low). Chip address pin A0 is 0.
J13Open* REGEN is unconnected. Internal 5V regulator is enabled.Closed REGEN is connected to GND. Internal 5V regulator is disabled.
J14Open TXENA is connected to VL (high)
Closed* TXENA is connected to GND (low)
J16Open TXENB is connected to VL (high)
Closed* TXENB is connected to GND (low)
PART TYPEMAX14819EVKIT# EV Kit
Ordering Information
Maxim Integrated │ 5www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit Bill of Materials
ITEM REF_DES DNI/DNP QTY MFG PART # MNFCTR VALUE DESCRIPTION
1 C1 - 1 C1005X7R1V103K050BB TDK 0.01UF CAPACITOR; SMT (0402); CERAMIC CHIP; 0.01UF; 35V; TOL=10%; TG=-55 DEGC TO +125 DEGC; TC=X7R
2 C2, C4, C8 - 3
C0603C475K8PAC;LMK107BJ475KA-T; CGB3B1X5R1A475K;C1608X5R1A475K080; CL10A475KP8NNN
KEMET; TAIYO YUDEN; TDK; SAMSUNG ELECTRONICS
4.7UF CAPACITOR; SMT (0603); CERAMIC CHIP; 4.7UF; 10V; TOL=10%; TG=-55 DEGC TO +85 DEGC; TC=X5R
3C3, C7, C9-C16, C18-
C21- 14 C0402C104J4RAC KEMET 0.1UF CAPACITOR; SMT; 0402; CERAMIC; 0.1uF; 16V; 5%; X7R; -55degC to + 125degC; 0
+/-15% degC MAX.
4 C5, C6 - 2C0402C180J5GAC; GRM1555C1H180JA01J;C1005C0G1H180J050
KEMET/MURATA/TDK 18PF CAPACITOR; SMT (0402); CERAMIC CHIP; 18PF; 50V; TOL=5%; TG=-55 DEGC TO
+125 DEGC; TC=C0G
5 C17 - 1 C0402C105K8PAC KEMET 1UF CAPACITOR; SMT; 0402; CERAMIC;1uF; 10V; 10%; X7R; -55degC to + 125degC
6 C22 - 1 C1608X5R1A106K TDK 10UF CAPACITOR; SMT (0603); CERAMIC CHIP; 10UF; 10V; TOL=10%; MODEL=; TG=-55 DEGC TO +85 DEGC; TC=X5R
7 C25, C27, C35 - 3 GMK107BJ105KA;
C1608X5R1V105K080ABTAIYO YUDEN/TDK 1.0UF CAPACITOR; SMT (0603); CERAMIC CHIP; 1UF; 35V; TOL=10%; TG=-55 DEGC TO
+85 DEGC; TC=X5R
8 C28, C34 - 2C0805C474K5RAC; GCM21BR71H474K; GRM21BR71H474KA88
KEMET/MURATA 0.47UF CAPACITOR; SMT (0805); CERAMIC CHIP; 0.47UF; 50V; TOL=10%; MODEL=X7R; TG=-55 DEGC TO +125 DEGC; TC=+
9 C29-C32 - 4 VJ0603A271KXB VISHAY VITRAMON 270PF CAPACITOR; SMT (0603); CERAMIC CHIP; 270PF; 100V; TOL=10%; MODEL=C0G;
TG=-55 DEGC TO +125 DEGC; TC=+
10 C33 - 1 C0603C104K8RAC KEMET 0.1UF CAPACITOR; SMT (0603); CERAMIC CHIP; 0.1UF; 10V; TOL=10%; MODEL=C0603 SERIES; TG=-55 DEGC TO +125 DEGC; TC=X7R
11 C36 - 1 C5750X7S2A106M TDK 10UF CAPACITOR; SMT (2220); CERAMIC CHIP; 10UF; 100V; TOL=20%; MODEL=; TG=-55 DEGC TO +125 DEGC; TC=X7S
12 D2, D6-D10 - 6 SMCJ48AST MICROELECTRONICS
48V DIODE; TVS; SMC; VRM=48V; IPP=20A
13 D11 - 1 SM30T39AYST MICROELECTRONICS
38.6V DIODE; TVS; SMC (DO-214AB); VRM=38.6V; IPP=56.3A
14 D12 - 1 SM30T33AYST MICROELECTRONICS
32.7V DIODE; TVS; SMC (DO-214AB); VRM= 32.7V; IPP=66.1A
15 DS1 - 1 LG L29K-G2J1-24 OSRAM LG L29K-G2J1-24 DIODE; LED; SMT (0603); Vf=1.7V; If(test)=0.002A; -40 DEGC TO +100 DEGC
16 DS6-DS10 - 5 LTST-C150CKTLITE-ON ELECTRONICS; INC.
LTST-C150CKT DIODE; LED; STANDARD; RED; SMT (1206); PIV=1.8V; IF=0.02A
17 J1 - 1 105017-0001 MOLEX 105017-0001 CONNECTOR; FEMALE; SMT; MICRO-USB B RECEPTACLE; RIGHT ANGLE; 5PINS
Maxim Integrated │ 6www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit Bill of Materials (continued)
ITEM REF_DES DNI/DNP QTY MFG PART # MNFCTR VALUE DESCRIPTION
18 J5-J10, J13 - 7 PCC02SAAN SULLINS PCC02SAAN CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY; STRAIGHT THROUGH; 2PINS; -65 DEGC TO +125 DEGC
19 J11, J12, J14, J16 - 4 PCC03SAAN SULLINS PCC03SAAN CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY; STRAIGHT THROUGH;
3PINS; -65 DEGC TO +125 DEGC 20 L1 - 1 BLM21AG601SN1D MURATA 600 INDUCTOR; SMT (0805); FERRITE-BEAD; 600; TOL=+/-25%; 0.2A
21 Q1-Q3, Q5 - 4 NTTFS5116PLON SEMICONDUCTOR
NTTFS5116PL TRAN; POWER MOSFET; PCH; WDFN8; PD-(40W); I-(-20A); V-(-60V)
22 R1, R2, R10-R13 - 6 ERJ-2RKF10R0X PANASONIC 10 RESISTOR; 0402; 10 OHM; 1%; 100PPM; 0.10W; THICK FILM
23R3, R9, R30,
R38, R40, R56, R57
- 7 RC0603JR-0710KL YAGEO PHYCOMP 10K RESISTOR; 0603; 10K OHM; 5%; 100PPM; 0.1W; THICK FILM
24 R4 - 1 CRCW060315K0FK VISHAY DALE 15K RESISTOR, 0603, 15K OHM,1%, 100PPM, 0.10W, THICK FILM
25 R5, R16-R19, R54 - 6 CRCW040210K0FK;
RC0402FR-0710K
VISHAY DALE; YAGEO PHICOMP
10K RESISTOR; 0402; 10K; 1%; 100PPM; 0.0625W; THICK FILM
26 R6 - 1 CRCW04022K20FK;RC0402FR-072K2L
VISHAY DALE/YAGEO PHICOMP
2.2K RESISTOR, 0402, 2.2K OHM, 1%, 100PPM, 0.0625W, THICK FILM
27 R7 - 1 CRCW060312K0FK VISHAY DALE 12K RESISTOR, 0603, 12K OHM, 1%, 100PPM, 0.10W, THICK FILM28 R8 - 1 CRCW06034K70FK VISHAY DALE 4.7K RESISTOR; 0603; 4.7K; 1%; 100PPM; 0.10W; THICK FILM
29 R14, R15 - 2 CRCW0603100RFK; ERJ-3EKF1000
VISHAY DALE/PANASONIC
100 RESISTOR; 0603; 100 OHM; 1%; 100PPM; 0.10W; THICK FILM
30R21, R22, R24, R25,
R28- 5 CRCW040210R0FK;
9C04021A10R0FL VISHAY DALE 10 RESISTOR; 0402; 10 OHM; 1%; 100PPM; 0.0625W; THICK FILM
31 R23, R39 - 2 ERJ8CWFR015 PANASONIC 0.015 RESISTOR; 1206; 0.015 OHM; 1%; 75PPM; 1W; THICK FILM
32 R26, R27, R29, R31 - 4 RC0402JR-07100RL YAGEO
PHYCOMP 100 RESISTOR; 0402; 100 OHM; 5%; 100PPM; 0.063W; THICK FILM
33 R33-R37 - 5 CRCW0603680RFK VISHAY DALE 680 RESISTOR, 0603, 680 OHM, 1%, 100PPM, 0.10W, THICK FILM
34SU1, SU3-
SU7, SU12-SU15
- 10 STC02SYANSULLINS ELECTRONICS CORP.
STC02SYAN TEST POINT; JUMPER; STR; TOTAL LENGTH=0.256IN; BLACK; INSULATION=PBT CONTACT=PHOSPHOR BRONZE; COPPER PLATED TIN OVERALL
35 SW1 - 1 219-7MST CTS 219-7MST SWITCH; SPST; SMT; STRAIGHT; 20V; 0.1A; SURFACE MOUNT DIP SWITCH-AUTO PLACEABLE; RINSULATION=1000M OHM
36 TP1-TP3, TP6-TP19 - 17 5014 KEYSTONE N/A TEST POINT; PIN DIA=0.125IN; TOTAL LENGTH=0.445IN; BOARD HOLE=0.063IN;
YELLOW; PHOSPHOR BRONZE WIRE SILVER PLATE FINISH;
37 TP20, TP22, TP23 - 3 5010 KEYSTONE N/A TESTPOINT WITH 1.80MM HOLE DIA, RED, MULTIPURPOSE;
38 TP21, TP24, TP26, TP27 - 4 5011 KEYSTONE N/A TEST POINT; PIN DIA=0.125IN; TOTAL LENGTH=0.445IN; BOARD HOLE=0.063IN;
BLACK; PHOSPHOR BRONZE WIRE SILVER PLATE FINISH;
Maxim Integrated │ 7www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
ITEM REF_DES DNI/DNP QTY MFG PART # MNFCTR VALUE DESCRIPTION
39 U1 - 1 93LC66BT-I/OT MICROCHIP 93LC66BT-I/OT IC; EPROM; 4K MICROWIRE SERIAL EEPROM; SOT23-6
40 U2 - 1 FT2232HL
FUTURE TECHNOLOGY DEVICES INTL LTD.
FT2232HL IC; MMRY; DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO; LQFP64
41 U3 - 1 MAX14931FASE+ MAXIM MAX14931FASE+
IC; DISO; 3/1 CHANNEL; 150MBPS; DEFAULT LOW; 2.75KVRMS DIGITAL ISOLATOR; NSOIC16 150MIL
42 U4 - 1 MAX12930BASA+ MAXIM MAX12930BASA+
EVKIT PART - IC; DISO; 2/0 CHANNEL; 25MBPS; DEFAULT HIGH; 3.75KVRMS DIGITAL ISOLATOR; NSOIC8
43 U5 - 1 MAX15006AATT+ MAXIM MAX15006AATT+
IC; VREG; ULTRA-LOW QUIESCENT-CURRENT LINEAR REGULATOR; TDFN6-EP 3X3
44 U10 - 1 MAX14819ATM+ MAXIM MAX14819ATM+
EVKIT PART-IC; PKG. DWG. NO.: 21-0144; PKG. CODE: T4877-4C; LAND PATTERN DWG. NO.: 90-0130; TQFN48-EP 7 X 7
45 Y1 - 1 ABM7-12.000MHZ-D2Y-T ABRACON 12MHZ CRYSTAL; SMT ; 18PF; 12MHZ; +/-20PPM; +/-30PPM
46 Y2 - 1 MJ-14.74560-12-30/30/4085MERCURY ELECTONICS EUROPE
14.7456MHZ CRYSTAL; SMT; 12PF; 14.7456MHZ; +/-30PPM
47 PCB - 1 MAX14819 MAXIM PCB PCB:MAX14819
48 C23, C24 DNP 0C0805C474K5RAC; GCM21BR71H474K; GRM21BR71H474KA88
KEMET/MURATA 0.47UF CAPACITOR; SMT (0805); CERAMIC CHIP; 0.47UF; 50V; TOL=10%; MODEL=X7R; TG=-55 DEGC TO +125 DEGC; TC=+
49 J20 DNP 0 PBC06SAANSULLINS ELECTRONICS CORP.
PBC06SAAN CONNECTOR; MALE; THROUGH HOLE; BREAKAWAY; STRAIGHT; 6PINS; -65 DEGC TO +125 DEGC
TOTAL 149
MAX14819 EV Kit Bill of Materials (continued)
Maxim Integrated │ 8www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit Schematic
3V3_
USB
1050
17-0
001
4.7U
F
FT22
32HL
10K
10K
3V3_
USB
10K
10K
10K
4.7U
F0.
1UF
0.1U
F0.
1UF
0.1U
F
3V3_
USB
10UF
V5V
MAX
1500
6AAT
T+ 0.1U
F
0.1U
F0.
1UF
0.1U
F0.
1UF
3V3_
USB
3V3_
USB
0.1U
F0.
1UF
0.1U
F
0.1U
F
1UF
V1V8
3V3_
USB
15K
10K
18PF
12M
HZ 18PF
0.1U
F4.
7UF
V5V
3V3_
USB
2.2K
V5V
93LC
66BT
-I/O
T
3V3_
USB
100
12K
0.01
UF
600
219-
7MST
100
V1V8
4.7K
VL
10K
10K
MAX
1293
0BAS
A+
3V3_
USB
10 10
MAX
1493
1FAS
E+
10 10 10 10
U1
U4
R3 R4
R10
R16
R8DS
1
R54
R19
R18
R17
SW1
R15
R14
R13
R12
R11
C19
C20
R9
C21
C18
U3
C16
C17
C22
U5
C15
C14
C13
C12
C11
C10
C7
R6R5
C6C5
Y1
C9
C3C2
C4
R7
U2
C8
R1
C1
L1
R2
J1
USB_
MIS
OUS
B_M
OSI
USB_
#CS
USB_
#IRQ
1
USB_
SCLK
U3_1
6
USB_
SCLK
USB_
#CS
USB_
MO
SI
#IRQ
SPI_
SDO
SPI_
#CS
SPI_
SCLK
SPI_
SDI
USB_
#IRQ
1
USB_
MIS
O
VLU3
_16
U3_1
6
8
1
67
32
5
4
KA
1413
1211
109
87
65
43
21
16
1
121314
611
543
159
82
107
65
3
21
4
7
26
135 4
21
495094
643712
56423120
1336
146
6032
514735251511
51
6163 6287
4645444341403938 5958575554535248
10
2423222119181716 34333230292827261 4
9876
532
BCBU
S7BC
BUS6
BCBU
S5BC
BUS4
BCBU
S3BC
BUS2
BCBU
S1BC
BUS0
ACBU
S7AC
BUS6
ACBU
S5AC
BUS4
ACBU
S3AC
BUS2
ACBU
S1AC
BUS0
BDBU
S7BD
BUS6
BDBU
S5BD
BUS4
BDBU
S3BD
BUS2
BDBU
S1BD
BUS0
ADBU
S7AD
BUS6
ADBU
S5AD
BUS4
ADBU
S3AD
BUS2
ADBU
S1AD
BUS0
OSC
O
OSC
I
VCORE
GNDGND
VCCIO
EECS
EECL
KEE
DATA
TEST
VREG
OUT
VREG
IN
VCOREVCORE
GNDGND
RESE
T#
SUSP
END#
PWRE
N#
VCCIO
GNDGND
VCCIO
GNDGND
VCCIO
VPLL
DPDM REF
AGNDVPHY
GND
4G
ND3
GND
2G
ND1
DPDMVB
US IDG
ND
VDDB
OUT
1
OUT
2
GND
AG
NDB
IN2
IN1
VDDA
1413
1211
109
87
65
43
21
OUT
A1
GNDBGNDB
GNDAGNDA
VDDB
VDDA
INB1
INA3
INA2
OUT
B3
ENA
ENB
INA1
OUT
B2O
UTB1
OUT
OUT
NC
ININ
DNG
PE
VCC
VSS
DODI
CLKCS
Maxim Integrated │ 9www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit Schematic (continued)
PRO
TECT
ION
DIO
DES
LEDS
/INDI
CATO
RS
VL S
ELEC
TTE
ST P
OIN
TS
CONN
ECTO
RS
10K
MAX
1481
9ATM
+
DNI
DNI
DNI
VL
PCC0
2SAA
N
PCC0
2SAA
N
NTTF
S511
6PL
PBC0
6SAA
N
1010 101010
1.0U
F
48V
48V
48V
48V
NTTF
S511
6PL
270P
F
0.01
5
NTTF
S511
6PL
100
VLV5_I
NT
V5_I
NT
1.0U
F
10UF
VLVL
VLVL
VL
VCC
VCC
1.0U
F
0.01
5
VCC
10K
10K
V5_I
NT
14.7
456M
HZ
10K
0.1U
F
10K
NTTF
S511
6PL
48V
100
VCC
0.47
UF
270P
F
48V
38.6
V
32.7
V
270P
F27
0PF
VL
680
680
680
680
680
100
0.47
UF 0.47
UF
0.47
UF
100
R36
DS9
R56
R27
U10
J12
C23
C24
J5
R21R2
8
R25
R24
R22
C28
C34
TP3
TP2
Y2
TP19
TP18
TP17
TP16
TP15
TP14
TP13
TP12
TP11
TP10
TP9
TP8
TP7
TP6
TP1
Q3
Q2
R26
R31
R29
D12
D11
D10
D9D8D7D6D2
R57
J20
DS10
DS8
DS7
DS6
R37
R35
R34
R33
J10
J9J8J7
R30
R38
R40
TP24
TP26
TP27
C36
TP20
TP21
TP22
TP23
J13
J11
C33
C35
J16
R39 Q5
C32
C31
C30
C29
C27
C25
Q1
J14
J6
R23
REG
EN
#ERR
B/LD
B2
#ERR
A/LD
A2
#ERR
B/LD
B2
CQB
#RDY
A/LD
A1#E
RRA/
LDA2
TXA
LIA
#IRQ
#RDY
B/LD
B1
SNA1
SPI_
SDI
#IRQ
L+A
TVS_
CLAM
P
LIB
SNA2
TXB
XIXO
SN1B
SN2B
CQA
TXEN
B
LIB
DIB
CLKO
CLKI
RXB
#IRQ
REG
EN
GA1
DIA
LIA
TXA
TXEN
A
RXA
A1
SPI_#CSSPI_SCLKSPI_SDO
RXB
G1B
GB2
A0
RXA
TXA
TXEN
A
TXB
CQB
L+B
TXB
TXEN
B
GA2
L+A
CQB
DIA
L+A
L+B
DIB
CQA
SPI_
SDO
SPI_
#CS
SPI_
SCLK
CLKICLKOSPI_SDI
CQA
#IRQ
#RDY
A/LD
A1
#RDY
B/LD
B1
L+B
DIB
DIA
2
21
31
42
321
4
8765
321
4
8765
CA
CA
CA
CA
CA
CA
CA
CA
654321 CA
CA
CA
CA
CA
21
21
21
21
31
21
321
321
321
4
8765
321
4
8765
321
424140
2986
3235 3334 2611
2710
4645
47
3136
7
2221
1918
1615
30
37 24
131
2512
289
49
23
14
20
174443
3938
42 53
48
21
CS
L+B
L+A
ERRB
/LD2
BRD
YB/L
D1B
ERRA
/LD2
ARD
YA/L
D1A
SCLKSDOSDI
CLKOCLKI
XOXI
VLA1A0LIA
RXA
TXEN
ATX
ATX
BTX
ENB
RXB
LIB
VCC
G1B
SN1B
SN2B
G2B
DIBNCNCCQBNCNCCQANCNCDIA
G2A
SN2A
SN1A
G1A
VCC
REG
ENV5IR
Q
EP
S DG
SD G
SD G S DG
Maxim Integrated │ 10www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit PCB Layout―Top Silkscreen
MAX14819 EV Kit PCB Layout―Top
MAX14819 EV Kit PCB Layout Diagrams
Maxim Integrated │ 11www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit―Ground
MAX14819 EV Kit―Power
MAX14819 EV Kit PCB Layout Diagrams (continued)
Maxim Integrated │ 12www.maximintegrated.com
Evaluates: MAX14819MAX14819 Evaluation Kit
MAX14819 EV Kit―Bottom
MAX14819 EV Kit―Bottom Silkscreen
MAX14819 EV Kit PCB Layout Diagrams (continued)
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. © 2017 Maxim Integrated Products, Inc. │ 13
Evaluates: MAX14819MAX14819 Evaluation Kit
REVISIONNUMBER
REVISIONDATE DESCRIPTION PAGES
CHANGED0 3/17 Initial release —
Revision History
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.