mandatory disclosures of global institute of management

Mandatory Disclosures of Global Institute of Management and Technology

1. Name of the Institution : Global Institute of Management and Technology Address of the Institution : NH-34, Pal Para More, Krishnagar, Nadia-741102, West Bengal. Phone number : 03472-271211 Mobile No. : 7407588881 Email Id : [email protected]

2. Name & Address of the Trust : National Centre for Development of Technical Education Address of the Institution : 28/1, D.L. Roy Road, Bowbazar, Krishnagar, Nadia-741101, W.B. Phone number : 03472-253625 Mobile No. : 9434053625 Email Id : [email protected]

3. Name & Address of the Principal : Dr. Sudipto Bhattacharyya Address of the Institution : D.L. Roy Road, Bowbazar, Krishnagar, Nadia-741101, W.B. Phone number : 03472-271211 Mobile No. : 7407588900 Email Id : [email protected]

4. Name of the affiliating University: Maulana Abul Kalam Azad University of Technology (MAKAUT),WB.

5. Governance

Members of the Board and their brief background Name Designation in BOG

Prof. (Dr.) Sajal Dasgupta Chairman Mr. Naresh Chandra Das Member Mr. S. Sinha Member Prof. (Dr.) Falguni Sinhababu Member Eastern Regional Officer, AICTE, Kolkata Member Nominee from WBSCT&VE&SD Member Prof. (Dr.) K. Chakroborty Member Prof. (Dr.) Santanu Das Member Prof. (Dr.) S.P. Ghosh Member Prof. (Dr.) Abhijit Chakraborty Member Mr. Paritosh Deb Member Mr. Dipankar Mitra Member Mr. Amitava Guha Member Dr. Sibasis Chatterjee Member Prof. (Dr.) Sujit Kumar Dey Member Mr. Subhankar Das Member Ms. Parama Dhar Member Mr. Saikat Das Member Ms. Sutapa Roy Nandi Member Mr. Partha Sarathi Roy Chowdhury Invitee Dr. Arin Bhattacharjee Invitee Dr. Sankar Prasad Dutta Invitee Prof. (Dr.) Sudipto Bhattacharyya Member Secretary

Members of the Academic Advisory Body: Sl. No.

Name

1. Prof. (Dr.) N. R. Banerjee EX- VC, BESUS

2. Prof.(Dr.) P.K. Banerjee Ex-Professor ETC Dept. JU

3. Prof. (Dr.) S.P. Ghosh Ex-Professor, NIT, Durgapur

4. Prof. (Dr.) S.K. Dey Prof. & HOD, AS&H Dept.

5. Prof. (Dr.) Shyamal Kumar Ghosh Ex-Professor, EE Dept. JU

6. Prof. (Dr.) Sudipto Bhattacharyya Professor & Principal, GIMT

7. Prof. (Dr.) Abhijit Chakroborty Vice-Principal, GIMT

8. Mr. Palash Bhoumik Manager (Training), NSIC

10. Prof. (Dr.) Rajib Bag Professor and HOD, CSE Dept. And Dean, Students’ Affairs, SKFGI, Mankundu

Frequency of the Board meeting and the Academic Advisory : Twice in a year

Organizational Chart:

Nature and Extent of involvement of Faculty and students in academic affairs/improvements: The faculty members are very much involved in teaching-learning process of various academic activities. The institute is taking special initiative by forming Centre for Staff Development Programme cell to motivate the faculty members to undergo various online training programmes of MOOCS of SWAYAM, NPTEL. They are also encouraged to publish and involve in research activities by publishing research papers in the standard journals and/or international and national conferences. The final year projects are done with utmost care and in some cases, research paper is also published by them. The faculty members are also members of various committees or the overall development of the college.

Mechanism / Norms and Procedure for democratic/ good Governance: The Institute follows a standard mechanism since its inception. From the very beginning we have kept our strong faith on democratic and good governance. That’s why, in case of decision-taking or policy-making, a committee is always formed and all the members’ opinions are given equal importance.

Students Feedback on Institutional Governance/ Faculty performance Students give formal feedback on the prescribed parameters, which reviewed by the top management and the faculty w.r.t. improvement, level upgradation. Informal feedback is also taken by the top management from time to time to ensure continual improvement.

Grievance Redressal mechanism for Faculty, staff and students: Grievance redressal mechanism at GIMT underlines accountability and monitoring towards the customers (faculty, staff and students). A ten members’ committee monitors and addresses the complaints/ suggestions received from the stakeholders and appropriate action is taken by the committee. A complaint/ suggestion box has been placed on the ground floor and second floor.

Establishment of Anti Ragging Committee: The Institute tolerates zero ragging in the campus. It is always aware of maintaining the ragging-free environment in the campus. The following are the members of Anti Ragging Committee Sl. No. Name Designation Position in Anti

Ragging Committee 01. Prof. (Dr.) Sudipto Bhattacharyya Principal Chairman (7407588900) 02. Prof.Dr. Abhijit Chakraborty Vice-Principal & HOD(ME) Member (9475824920) 03. Mr. Aniruddha Roy Asst. Prof. Convenor (8617865866) 04. Ms. Sutapa Roy Nandi Asst. Reg. Member (7407112266) 05. Prof. Dr. Sujit Kumar Dey HOD(AS&H) Member (9433863790) 06. Mr. Arindam Prasad Sinha HOD(CE) Member (9732129532) 07. Dr. Souvik Pal HOD(CSE) Member (9732129532) 08. Mr. Pijush Dutta HOD(ECE) Member (9836134397) 09. Ms. Sagnika Bhattacharjee HOD(EE) Member (9832339432) 10. Mr. Prasenjit Bhattacharjee Asst. Prof. Member (97333335280) 11. Representative of District Magistrate NA Member 12. Representative of ASP Krishnagar HQ NA Member 13. Mr. Kumarjit Dutta NGO Member (7797755599) 14. Mr. Kalipada Majumdar Guardian Representative Member (7384307788) 15. Mr. Sourav Biswas Student Representative Member (7001596414) 16. Mr. Subrata Basak Student Representative Member (7908753332) 17. Ms. Priyanka Sikdar Student Representative Member (7098610106

Establishment of Online Grievance Redressal Mechanism: The Institute has already established Online Grievance Redressal Mechanism. And it is already available in our website. The software for the mentioned mechanism has been purchased from Edu Grievance as per AICTE direction. The link is https://gimtindia.edugrievance.com/

Establishment of Grievance Redressal Committee in the Institution and Appointment OMBUDSMAN by the University: We have requested the Registrar of the affiliating university for sending the name of OMBUDSMAN on 08/02/2021. The final appointment is under process.

Establishment of Internal Complaint Committee (ICC): An Internal Complaint Committee has been constituted for the year 2020-21 to resolve all the matters related to General sensitization, Prevention and Prohibition of Sexual Harassment of Women Employees and Students and Redressal of Grievances, in compliance with the AICTE norms, vide no. F. AICTE/WH/2016/01, dated 10th June, 2016. The name of the Committee-Members are as follows

Sl. No. Name Designation Position in Internal Complaint Committee

01. Prof. Dr. Sudipto Bhattacharyya Principal Chairman 02. Prof. Labanya Ray Mukherjee Asst.Prof. AS&H Dept. Convenor 03. Prof. Moutusi Sarkar Asst.Prof. AS&H Dept. Convenor 04. Ms. Sagnika Bhattacharjee HOD(EE) Member 05. Ms. Sangita Biswas Diploma-in-charge (CE) Member 06. Prof. Saswati Dey Asst. Prof. (ECE Dept.) Member 07. Prof. Rakhi Chakraborty Asst. Prof. (CSE Dept.) Member 08. Prof. Suparna Maity Asst. Prof. (EE Dept.) Member 09. Prof. Anustupa Ray Asst. Prof. (CSE Dept.) Member 10. Ms. Sanjukta Bhatta NA (Honorary member)

Establishment of Committee for SC/ ST:

An SC/ST Committee has been constituted for the year 2020-21 to resolve all the matters related to SC/ST faculty and students as per AICTE Norms. The name of the Committee-Members are as follows Sl. No. Name Designation Position in Internal Complaint

Committee 01. Prof. Dr. Sudipto Bhattacharyya Principal Chairman 02. Mr. Nirmal Kumar Biswas Asst. Prof. Convenor 03. Mr. Manob Prodhan Technical Asst. Member 04. Mr. Deepjyoti Santra Asst. Prof. Member 05. Mr. Prasanta Biswas Asst. Prof. Member 06. Mr. Purnendu Das Technical Asst. Member 07 Mr. Pijush Dutta HOD(ECE) Member 08. Mr. Dipankar Saha Asst. Prof. Member 09. Ms.Saswati De Asst. Prof. Member

Internal Quality Assurance Cell: The Internal Quality Assurance Cell has been formed to ensure and focus institutional functioning towards quality enhancement good practices. The name of the Committee-Members are as follows

Sl. No.

Name Designation Position in Internal Quality Assurance Cell

01. Prof. Dr. Sudipto Bhattacharyya Principal Chairperson 02. Prof. Dr. Abhijit Chakraborty Vice Principal. Director 03. Prof. Dr. Shyamal Kr. Ghosh Retired Professor, JU Senior Members 04. Prof. Dr. Shakti Pada Ghosh Retired Professor, NIT, Durgapur Senior Members 05. Prof. Dr. Souvik Kr. Pal Associate Prof. & H.O.D , (CSE Dept.) Member 06. Mr. Pijush Dutta Asst. Prof. & H.O.D , (ECE Dept.) Member 07. Prof. Dr. Sujit Kr. Dey Professor & H.O.D., ASH Dept. ) Member 08. Mr. Arindam Prasad Sinha Asst. Prof & T.I.C, (CE Dept.) Member 09. Mr. Sourajit Das Asst. Prof., (CE Dept. ) Member 10. Mr. Prasenjit Bhattacharya Asst. Prof., (ASH Dept.) Member 11. Mr. Sujit Biswas Asst. Prof., (CSE Dept.) Member 12. Ms. Sangita Biswas Diploma – in – charge (CE) Member 13. Mr. Bidyut Karmaker Diploma –in- charge (ME) Member 14. Mr. Shuvankar Das NA Management 15. Mrs. Sutapa Roy Nandi Asst. Registrar Senior Administrative Officers 16. Mr. Partha Chakraborty Accountant Senior Administrative Officers 17. Mr. Niladri Das Librarian Senior Administrative Officers 18. Mr. Sudipta Sarkar EE, 3RD YR Nominee from Students 19. Ms. Rimika Adhikary Asst. Teacher, K.P.S Nominee from Alumni 20. Mr. Joy Krishna Paul Sr. Regional Design Engineer(East &

CG), SYSKA LED Nominee from Induatrialist

21. Ms. Sagnika Bhattacharjee Asst. Prof. & H.O.D, (EE Dept.) Co- ordinator 6. Programmes Name of the Programmes approved by AICTE: B.Tech & Diploma Engineering Name of Programmes Accredited by NBA: NO Status of Accreditation of the Courses: NO Total number of courses: B.Tech- 5, Diploma Engineering – 2 No. of Courses for which applied for Accreditation: No Status of Accreditation – No For each Programme the following details are to be given(Preferably in Tabular form): Name: B.Tech & Diploma Engineering Number of Seats: 203 & 90 Duration: 4 years & 3 years Cut off marks/ rank of admission during the last three years: 45% in PCM & 35% in PM Fee: As per the directives of Department of Higher Education, Govt. Of West Bengal Placement Facilities: Available Campus Placement in last three years with minimum salary, maximum salary and average salary:

Name of the Programme

2018-19 2019-20 2020-21

B.Tech 72 57 52 Salary Maximum: 3.60 LPA

Minimum: 1.50 LPA Average: 2.10 LPA

Maximum: 2.40 LPA Minimum: 1.44 LPA Average: 1.80 LPA


Diploma Engineering

64 55 32

Salary Maximum: 1.8 LPA Minimum: 1.20 LPA Average: 1.40 LPA



7. Faculty Name Designation Department

PROF. DR. SUDIPTO BHATTACHARYYA PRINCIPAL CSE(IOT) DR. SUJIT KR.DEY PROFESSOR AS&H MR. AMIT KUMAR DAS ASST.PROFESSOR AS&H MR. ANIRUDDHA ROY ASST.PROFESSOR AS&H MR. ISHINDRA BISWAS ASST.PROFESSOR AS&H MR. PRANTIK SINHA ROY ASST.PROFESSOR AS&H MR. PRASENJIT BHATTACHARJEE ASST.PROFESSOR AS&H MR. PRITAM KARMAKAR ASST.PROFESSOR AS&H MR. SREYAN KUMAR BISWAS ASST.PROFESSOR AS&H MR.ASOK KUMAR SARKAR ASST.PROFESSOR AS&H MS. AYANITA SAHA ASST.PROFESSOR AS&H MS. CHANDRANI BISWAS ASST.PROFESSOR AS&H MS. ESHITA CHAKRABORTY ASST.PROFESSOR AS&H MS. LABANYA RAY MUKHERJEE ASST.PROFESSOR AS&H MS. MOUTUSI SARKAR ASST.PROFESSOR AS&H MS. NILANJANA SARKAR ASST.PROFESSOR AS&H DR. SOUVIK PAL ASSOCIATE PROFESSOR C.S.E MR. FAKRUDDIN ALI AHMED ASST.PROFESSOR C.S.E MR. NIRMAL KUMAR BISWAS ASST. PROFESSOR C.S.E MR. RAJIB DUTTA ASST. PROFESSOR C.S.E MR. SUJIT BISWAS ASST. PROFESSOR C.S.E MS. ANUSTUPA RAY ASST. PROFESSOR C.S.E MS. NITI DEY ASST. PROFESSOR C.S.E MS. RAKHI CHAKRABORTY ASST. PROFESSOR C.S.E PROF. DR. S.P GHOSH SENIOR PROFESSOR CIVIL MR. ARINDAM PRASAD SINHA ASST.PROFESSOR CIVIL MD. MOMIT-AR-RASHID PRO-TERM LECTURER CIVIL MR. CHAYAN BISWAS ASST.PROFESSOR CIVIL MR. PRASANTA BISWAS ASST.PROFESSOR CIVIL MR. PROVAT KUMAR SAHA LECTURER CIVIL MR. SOURAV SARKHEL ASST.PROFESSOR CIVIL MR. SOUROJIT DAS ASST.PROFESSOR CIVIL MS. SANGITA BISWAS LECTURER CIVIL MS. SUNIPA ROY ASST PROFESSOR CIVIL MR. PIJUSH DUTTA ASST.PROFESSOR E.C.E MR. NILANJAN MUKHOPADHYAY ASST PROFESSOR E.C.E MR. DIPANKAR SAHA ASST.PROFESSOR E.C.E. MS. SASWATI DE ASST. PROFESSOR E.C.E. PROF. DR. SHYAMAL KUMAR GHOSH SENIOR PROFESSOR EE MS. SAGNIKA BHATTACHARJEE ASST. PROFESSOR EE DR. SOMNATH DAS ASST PROFESSOR EE MR. ARINDAM PAL ASST.PROFESSOR EE MR. DEEPJYOTI SANTRA ASST.PROFESSOR EE MS. SUPARNA MAITY ASST.PROFESSOR EE DR. ABHIJIT CHAKRABORTY PROFESSOR & VICE PRINCIPAL ME

MR. BIDYUT KARMAKAR LECTURER ME MR. RAJARSHI BASU ASST.PROFESSOR ME MR. SOVAN PATRA ASST.PROFESSOR ME SK. HIKMAT ASST. PROFESSOR ME

8. Profile of Vice Chancellor/ Director/ Principal

Name: : Dr. Sudipto Bhattacharyya Date of Birth: : 15-12-1974 Unique ID : 1-7780485582 Education Qualifications : P.hD

Work Experience Teaching : 20 Research : 02 Industry : 02 Area of Specialization : CYBER SECURITY

Research guidance(Number of Students) : 22 No of Papers published in National Journals : 25 No of Papers published in international Journals : 15 No of Book published : 01

9. Fee

Category Admission Fee Tuition Fee Total B-Tech(General) 45000 30000 250000 B-Tech(Lateral) 30000 25000 150000 Diploma 25000 18000 110000

10. Admission Particulars 1st Sem 2nd Sem 3rd Sem 4th Sem 5th Sem 6th Sem

Admission Fees 5000.00 Library Fees 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00

Tuition Fees (NUL) 11000.00 11000.00 11000.00 11000.00 11000.0 0 11000.00

Caution Money (Refundable) 5000.00 Student’Development Fees 3000.00 3000.00 3000.00 3000.00 3000.00 3000.00

Total: 26000.00 16000.00 16000.0 0 16000.00 16000.0

0 16000.00

Grand Total: 1,06,000.00 (Rupees One Lakh Six Thousands Only)

Particulars 1st Sem 2nd Sem 3rd Sem 4th Sem 5th Sem 6th Sem Admission Fees 5000.00

Library Fees 2000.00 2000.00 2000.0 0 2000.00 2000.0

0 2000.00

Tuition Fees (NUL) 00 00 00 00 00 00 Caution Money (Refundable) 5000.00

Student’Development Fees 3000.00 3000.00 3000.0 0 3000.00 3000.0

0 3000.00

Total: 15000.00 5000.00 5000.0 0 5000.00 5000.0

0 5000.00

Grand Total: 40,000.00 (Rupees Forty Thousands Only) 2009

-10 2010 -11

2011 -12

2012 -13

2013 -14

2014 -15

2015 -16

2016 -17

2017 -18

2018 -19

2019- 20

No. of Seats Sanctioned with the year of approval

240 360 360 360 360 360 360 360 360 360 360

Number of students admitted under various categories each year in the last three years.

Department 2016-17 2017-18 2018-19 CE

8 8 4

ME 10

5 6

EE 6

4 0

ECE 2

5 5

CSE 17

20 12

CE (Diploma)

56 54 43

ME (Diploma)

41 56 59

Number of applications received during last two years for admission under Management Quota and number admitted: Nil

11. Admission Procedure: As per the guidelines of WBJEEB, AICTE, MAKAUT & WBSCTVESD

12. Criteria and Weightages for Admission: As per the guidelines of WBJEEB, AICTE, MAKAUT & WBSCTVESD

13. List of Applicants: List of candidate whose applications have been received along with percentile/percentage

score for each of the qualifying examination in separate categories for open seats. List of candidate who have applied along with percentage and percentile score for Management quota seats: Not Applicable.

14. Results of Admission Under Management seats/Vacant seats: Not Applicable.

15. Information of Infrastructure and Other Resources available: Number of Class Rooms and size of each: 23. Size of each classroom: 74sqm Number of Tutorial rooms and size of each: 8. Size: 36sqm Number of Laboratories and size of each: 44. Size: 74 sqm Number of Drawing Halls with capacity of each: 1. Size: 140sqm Number of Computer Centres with capacity of each: 3. Size: 100 sqm Central Examination Facility, Number of rooms and capacity of each: 1 Size: 38 sqm Barrier Free Built Environment for disabled and elderly persons: Available Occupancy Certificate: Obtained from District Engineer, Nadia Zila Parishad, WB. Fire and Safety Certificate: Applied for NOC Hostel Facilities: Yes Library: Number of Library books/ Titles/ Journals available (program-wise): B.Tech & Diploma : 2907 (Title).

Number of books: 33823 List of online National/ International Journals subscribed: 17 E- Library facilities:

Laboratory and Workshop List of Major Equipment/Facilities in each Laboratory/ Workshop:

1. FLUID MECHANICS & HYDRAULICS LAB

NAME OF EXPERIMENTAL SET UP

i. NOTCH APPARATUAS ( V-notch& RECTANGLE weir) ii. PITOT TUBE

iii. VENTURI AND ORIFICE METER SETUP iv. Hydraulic coefficient Cc, CV APPARATUS v. CENTRIFUGAL PUMP TEST

vi. PIPE FRICTION APPARARUS vii. REYNOLDS APPARATUS

viii. CAVITATIONS APPARATUS ix. CENTRIFUGAL AIR BLOWER x. AIR COMPRESSOR

xi. VERIFICATION OF STOKES LAW APPARATUS

2. APPLIED MECHANICS LAB

I. Rockwell Hardness test apparatus II. Hellical spring test apparatus

III. Impact test apparatus IV. Compression testing machine V. Universal Testing machine

VI. Torsion Testing machine

3. MATERIAL HANDLING LAB

i. Fatigue test apparatus ii. Erichsen Cupping Test apparatus

iii. Ultrasonic pulse velocity machine

4. HIGHWAY & TRANSPORTATION LAB

i. Aggregates- Impact test machine ii. Los-Angeles Abrasion value test machine

iii. Elongation Index test machine iv. Flakiness Index test machine v. Flash & Fire point test machine

vi. Penetration value test machine vii. Softening point test machine

viii. Striping value test machine ix. Marshal stability test machine

5. CAD LABORATOR

TECHNICAL SOFTWARE

i. Autocad Software [ License expired ] ii. Stadpro Software [ License expired ]

6. CONCRETE LAB

i. Compacting Factor Test Apparatus ii. Flextural strength Testing Apparatus

iii. Vee-Bee Apparatus iv. Compressive strength Testing Machine v. Vicat Apparatus

vi. Rebound Hammer Apparatus vii. Le-Chatelier Apparatus

viii. Le-Chatelier Flask

7. ENGINEERING GEOLOGY LABORATORY (CE594)

i. Hardness tool box. (Minerals) ii. Colour samples tool box. (Minerals)

iii. Luster samples tool box. (Minerals) iv. Cleavage & fracture sample tool box. (Minerals) v. Rock samples (Igneous, sedimentary & metamorphic).

vi. Various form of crystalline structure sample (Solid & transparent both). vii. Various landforms (e.g. Faults & folds)

viii. Analysis of various rock slides with microscope.

8. SOIL MECHANICS LABORATORY

i. DETERMINATION OF WATER CONTENT ii. DETERMINATION OF SPECIFIC GRAVITY BY PYCNOMETER

iii. LIQUID LIMIT TEST iv. PLASTIC LIMIT TEST v. FIELD DENSITY BY CORE CUTTER METHOD

vi. FIELD DENSITY BY SAND REPLACEMENT METHOD vii. STANDARD PROCTOR TEST

viii. PARTICLE SIZE DISTRIBUTION BY SIEVE ANALYSIS ix. PARTICLE SIZE DISTRIBUTION BY HYDROMETER METHOD x. DIRECT SHEAR TEST

xi. VANE SHEAR TEST xii. TRI-AXIAL TEST

xiii. CBR TEST xiv. UNCONFINED COMPRESSION TEST xv. ONE DIMENSIONAL CONSOLIDATION TEST

9. SURVEY LAB

i. Metric Chain with accessories

ii. Metallic Tape iii. Prismatic Compass iv. Plane Table with accessories v. Theodolite

vi. Dumpy Level with stand & staff vii. Auto Level with stand and staff

viii. Total station with accessories

Lab Equipments of CSE Department:

Basic Computing lab

Experiments Hardware Software

C programming C++ programming Numerical

Programming

Computer Architecture Unix Programming

53 Computers (Dell, ACER,

HCL) 6 D-link switch (24 port)

1 Server

Windows Linux

MS Office Turbo C/C++ i

VERILOG

Data Base and OS Lab Experiments Hardware Software

PL/SQL programming 30 Computers (Dell, ACER, Windows Shell programming JAVA programming

HCL) 2 D-link switch (24 port)

Linux ORACLE

JDK

Software Engineering and Networking Lab Experiments Hardware Software

Implementations of 25 Computers (Dell, ACER, Windows various HCL) Linux

phase of SDLC model 2 D-link switch (24 port) Visual Studio VB Lab

Socket programming

1. BASIC & ANALOG ELECTRONICS LAB

This lab comprises of Basic Electronics and Analog Electronics lab. Each of them has different lab set-up and

different experiments.

BASIC ELECTRONICS LAB

Experiments: Training in this laboratory is done through properly planned structured programme with the following sequences:

i) Introduction and identification of different active and passive electronic devices / components. ii) Familiarization with different signal sources and instruments used in electronic engineering. In the process student can learn the significances of the manufactures specifications etc. iii) To learn the use/ handling of different measuring instruments like multimeters, C.R.O etc. iv) Find and studies on the various characteristic of different active devices like diodes (PN Junction Diode, Zener Diode, LED) transistors, field effect transistor, Photodiodes and to determine the different parameters of these devices v) To recognize Half Wave & Full Wave rectified sinusoidal signal & find out different parameters. vi) Familiarization with op-amp & measurement of it’s different parameters. vii) Implementation of different logic gates & Boolean functions using different Ics.

Major Equipment in the Lab 1. Various power supplies – fixed and variable variety with different current rating. Make – Scientech, Aplab etc. Some of the power supply are in use designed and fabricated technical staff of the department. 2. Digital multimeters (scientech) 3. Cathode ray oscilloscope (Scientech) 4. Function Generator (Scientech) 5. Regulated DC power supply (Scientech) 6. FET Test Set (Detech, Scientech- Nvis Technologies) 7. PN Junction Diode / Zener Diode Test Set (HITECH) 8. Op-Amp Power Supply 9. Rectifier Test Set (HITECH) 10. Op-Amp Test Set (SCIENTECH)

11 Transistor Test Set (Scientech- Nvis Technologies)

12 Multi power Supply (Scientech)

ANALOG ELECTRONICS LAB

Experiments: In this laboratory students are introduce to design, assembly, testing, and trouble-shooting of analog electronic circuits.

Experiments encompass a wide range of topics such as amplifiers, filters, power supplies, power control, oscillators, and communication circuits. In this laboratory experiments are done through following planned sequences: 1) Learn the various applications of diode like-clipper, clamper, full wave rectifier etc. 2) Study voltage regulator using Zener diode and measure ripple and regulation characteristics without and with capacitor filter. 3) Find and studies on the various characteristic of B.J.T & F.E.T and to determine their different parameters. 4) Study some important aspects of different power amplifiers configurations. Eg.- class A & class B, class C & Push-Pull amplifiers 5) Design a two-stage R-C coupled amplifier & study of its gain & Bandwidth. 6) Realization of different applications of operational amplifier - current mirror, level shifter circuit & V-to-I , I-to-V converter,. 7) Find and studies the different configuration of multivibrators using NE 555 8) Design and construct switched mode power supply, voltage regulator using regulator IC chip 9) Construction of simple function generator using IC chip. 10) Study of a digital to analog converter and vice versa.

Major Equipment in the Lab 1) Function generator- (Scientech) 2) Variable Power supply: fixed and variable variety with different current rating. Make – Elnova, Scientech etc. Some of the power supply is in use designed and fabricated by students and technical staff of the department. 3) Digital multimeters ( SCIENTECH) 4) Oscilloscope Cathode Ray Oscilloscope. (25MHz, 30 MHz, scientech) ii)Digital Storage Oscilloscope. (100MHz, scientech)

4) Distortion Meter(Scientech). 7) Output Power Meter. (Scientech) 8) Trainer Kit. Transistor Push Pull Amplifier. (scientech) , Tuned Amplifier. (Scientech), Switch Mode Power Supply. Nvis technologies , Push Pull Amplifier.(Scientech), Analog To Digital Converter. (Scientech) , Class A Amplifier. (Scientech), Class B Amplifier. (Scientech),Digital To Analog Converter. (Scientech) , V.C.O & PLL. (Scientech), Class C Tuned Amplifier. (Scientech), Transistor Characteristics Trainer. ( Nvis technologies)

2. DIGITAL AND MICROPROCESSOR LAB

This lab comprises of Microprocessor and Digital Electronics lab. Each of them has different lab set-up and different experiments

DIGITAL ELECTRONICS LAB Experiments:

In this laboratory students are introduced with digital ICs and their specifications and are skilled with practical digital circuit design. Training in this laboratory is done with accurate planned structured programme with the following sequences: i) Introduction and identification of different digital IC chips and their specifications, concept of Vcc and ground, verification of the truth tables of logic gates. ii) To learn the use of different ICs and LEDs for designing logic circuit and verifying the results respectively. iii) Study of basic gate diagrams and realize the same with universal logic gates . iv) Realization of different codes and also the conversion technique like BCD to Excess-3 and vice-versa, BCD to decimal to drive 7-segment display using multiplexer etc. v) Construction of various combinational circuits such as adder, adder circuit using shift Register and full adder,subtractor,simple decoder,multiplexer,parity generator and comparator using logic gate ICs or any specific chip.

Major Equipment in the Lab 1. Fixed and variable Various power supplies (scientech) 2. Multiple power supply (Scientech) 3. Digital multimeters (scientech) 4. Function generators: (Scientech) 5. Cathode ray oscilloscope (Aplab,scientech)

MICROPROCESSOR AND MICROCONTROLLER LAB Experiments: i) Study of prewritten programs on trainer kit using the basic instruction set (data transfer, Load/Store, Arithmetic, Logical). ii) Familiarization with 8085 simulator on PC iii) Programming using kit and simulator for: a) Table look up b) Copying a block of memory c) Shifting a block of memory d) Packing and unpacking of BCD numbers e) Addition of BCD numbers f) Binary to ASCII conversion g) String Matching Multiplication using Booth’s Algorithm iv) Program using subroutine calls and IN/OUT instructions using 8255 PPI on the trainer kit e.g. subroutine for delay, reading switch state and glowing LEDs accordingly v) Study of timing diagram of an instruction on oscilloscope

Major Equipment of the lab: 1) 8085 Microprocessor trainer kit 2) 8086 Microprocessor trainer kit 3) 8051 Microcontroller trainer kit 4) 8255 Microprocessor trainer kit 5) 8279 Microprocessor trainer kit

3. COMMUNICATION LAB

This lab comprises of Analog Communication lab, Digital Communication lab and Advanced Communication lab. Each of them has different lab set-up and different experiments.

ANALOG COMMUNICATION LAB

Experiments: This is a laboratory where students are aquinted with Communication Engineering for the first time and are skilled with

preliminary of Communication .Training in this laboratory is done through properly planned structured programme with the following sequences: i) Measurement of modulation index of an AM signal. ii) Measurement of output power with varying modulation index f an AM signal(for both DSB-SC & SSB). iii) Measurement of distortion of the demodulated output with varying modulation index of an AM signal (for both DSB-SC & SSB). iv) Measurement of power of different frequency components of a frequency modulated signal & the measurement of the bandwidth. v) Design a PLL using VCO & to measure the lock frequency. vi) Design a FM demodulator using PLL.

Major Equipments in the Lab: 1. Various power supplies – fixed and variable variety with different current rating. Make – Enova, Aplab etc. Some of the power supplies are in use designed and fabricated by technical staff of the department and project students. 2. Digital multimeters : Metravi-19 3. Cathode ray oscilloscope : Scientech (20MHz, 25MHz, 30 MHz, 50 MHz) 4. DSB, SSB/AM Transmitter Trainer kit: Scientech, ST-2201 5. DSB, SSB/AM Receiver Trainer kit: Scientech, ST-2202 (also used as super heterodyne receiver) 6. FM Transmitter & Receiver Trainer Kit; SCIENTECH, ST-2203 7. TDM Modulation & Demodulation Trainer Kit; SCIENTECH, ST-2102

DIGITAL COMMUNICATION LAB

Experiments: Digital systems allow for increased data transmission and more resistance to noise. There are many different ways to

modulate binary digital signals depending on the communication system. The goals of this lab is to supplement the theory course (Digital Communication systems) to assist the students in obtaining a better understanding of the operation of digital modulation schemes and to provide experience in analyzing and test of digital communication systems using simulation software as well as lab instruments. Also Laboratory experiments deal with the following experiments: 1. To understand how Digital modulation like ASK, FSK, PSK is done & what is the output waveform. 2. Studies on Delta modulator & Demodulator using trainer kits

3. To understand the digital to Analog and Analog to Digital conversion. 4. To generate the PN sequence in lab. 5. Studies of PCM transmitter and receiver. 6. Study of line coders: UPNRZ, PRZ, BPRZ, PNRZ 7. Studies on Adaptive delta modulation using trainer kits 8. Studies on PCM/TDM system 9. Studies of direct sequence spread spectrum modulation and demodulation

Major Equipment in the Lab 1. Various Kit: ASK, FSK, PSK, TDM, Delta Modulation, Adaptive Modulation, PCM, A/D, D/A converter etc. (Scientech) . 2. Cathode ray oscilloscope.(Scientech ,20MHz, 25MHz, 30 MHz, 50 MHz) 3. Digital Storage Oscilloscope. 4. Spectrum Analyzer.

ADVANCED COMMUNICATION LAB

Experiments: The Advance lab provides a wide range of experimental setup as follows

• Measurement of numerical aperture of an Optical Fiber. • Measurement of Propagation loss, bending loss, and Connector loss in an Optical Fiber. • Studies of LASER Characteristic: A) Optical Power (Po) of a LASER Diode Vs LASER Diode Forward current (IF). B) Monitor Photo Diode Current (Im) vs. LASER Optical Power output • Studies on cellular mobile communication System: Working principle, input /output Signal of different sections, Transmitter and Receiver section. Study of SIM Card and its Detection, SIM reset, SIM Clock, SIM Data, and SIM Supply. • Studies on GSM: Understanding of GSM Technology Signal like its network, network commands: Modem Commands, Simcard hardware commands, Network registration commands, Call control commands, Phone book commands, Message handling commands

Major Equipment in the Lab • Optical fiber trainer kit (Scientech) • Optical fiber trainer kit for PC to PC communication (Scientech) • LASER trainer kit (Scientech) • GSM trainer kit (Scientech)

4. SIMULATION LAB

This lab offers Signals and System lab, Solid State Lab, Digital Signal Processing Lab and VLSI lab. Each Laboratory has different equipments and different experiments where all kind of simulation are performed using different software tools.

SIGNALS & SYSTEMS LAB

Objectives: The Signals and Systems is concerned with the representation of signals and the study of the changes that occur to

them as they pass through systems. The study of Signals and Systems is to allow one to predict, with some certainty, the behaviour of systems when they are subjected to different input signals. The problem solving and analytical skills that the student acquires through the study of the subject can often help him in his later career to tackle and solve problems in a systematic manner.

Looking ahead, the scope of potential applications of the methods of Signals and Systems will continue to grow as engineers are faced with new challenges involving ever more complex systems and processes. Experiments: 1. Students can visualize the Z-domain analysis of: a) Sinusoidal signals b) Step functions. 2. Verify the output of Fourier and Laplace transformations of a signal. 3. To study convolution theorem in time and frequency domain. 4. To Study Signal Synthesis via sum of harmonics. 5. To study LPF &HPF, band passes and rejects filters using RC circuits. 6. To demonstrate how analog signals are sampled and how different sampling rates affect the outputs. 7. To study sampling theorem for low pass signals and band pass signals. 8. To determine the components of: a) Square wave b) Clipped sine wave.

Major equipments in the lab: 1. Cathode Ray Oscilloscope (Scientech ,20MHz, 25MHz, 30 MHz, 50 MHz) 2. Function Generator: i) Scientech, ST-4060,1MHz 1. 3. Digital Multi-meter (Metravi-19) 4. MATLAB 2008b (Mathworks)

DIGITAL SIGNAL PROCESSING LAB Objective:

Digital Signal Processing (DSP) can be described as the processing of signals using digital techniques or digital computers. A signal is a piece of information in binary or digital form. Digital Signal processing techniques improve signal quality or extract important information by removing unwanted part of the signal.

Digital Signal Processing accounts for a substantial proportion of the world market for electronic devices. And therefore, the leading electronics manufacturers have invested heavily in DSP technology

Experiments: 1. Realization of different kinds of discrete signals. 2. Effect of different arithmetic operations on the discrete signals. 3. Study the utility of convolution of two sequences using different methods. 4. Familiar with frequency domain analysis of the discrete signals using z-transform and Fourier transform. 5. Simulate DFT & IDFT & study their properties. 6. Study the difference between linear and circular convolution and its application. 7. Realization of the Butterworth Filter with different set of design parameters.

Major equipments in the Lab: 1. Desktop PC 2. DSP Starter Kit TMS320C5416 (Texus Instruments) 3. MATLAB 7.0.1 (Mathworks) 4. MATLAB 2008b (Mathworks)

SOLID STATE DEVICE LAB

Objectives: This lab is newly introduced in the curriculum of WBUT for the B.Tech students of ECE 2nd year 3rd semester. The

purpose of this lab is to realize the characteristics of various semiconductor devices such as BJT, JFET, and RC coupled amplifiers etc. using breadboard and also using suitable software.

This lab gives the proper justification of theoretical knowledge in practical domain by the help of numerous components and equipment present in the laboratory.

Experiments: 1. Study the input characteristics curve of BJT in Common Emitter mode of operation. 2. To obtain the output characteristics curve of BJT in Common Emitter mode of operation. Hence determine the hybrid parameters. 3. To observe the drain and transfer characteristics of JFET. Hence determine the FET parameters. 4. Study the variation of small signal voltage gain with frequency of JFET. 5. Observe the variation of small signal voltage gain with frequency for single stage CE amplifier. 6. Analysis of the drain and transfer characteristics of a MOS structure using suitable software. 7. To obtain the C-V characteristics of Varactor diode using suitable software.

Major Equipments in the Lab 1. Desktop PC 2. Power Supply 3. CRO 4. Function generator 5. PSPICE

VLSI CIRCUITS & SYSTEM LAB

Objectives: This lab has been established to give idea to the students about the configuration and simulation of Very Large Scale

Integrated Circuits & Systems. Basic Objectives of this lab to explore various design style of simple and complex Integrated Circuits(IC) near to students. In this laboratory students are able to understand about models and model parameters of various devices like MOSFET, BJT, DIODE etc. which are suited for IC Technology. In this laboratory there is provision to configure and simulate CMOS Circuit & Systems also. It is possible to design of layout of various CMOS Circuits in micron, submicron and deep submicron level using Tanner Tools.

Experiments:

Following experiments are performed by B.Tech (E.C.E) 6th semester students. • Transient analysis of CMOS Inverter. • Simulation of resistive load MOS Inverter.

• Study of voltage transfer characteristics (VTC) of CMOS Inverter. • Study of voltage transfer characteristics (VTC) of resistive load MOS Inverter. • Design and Simulation of logic gates (AND,OR,NAND,NOR,Ex-OR,Ex-NOR). • Familiarization of SPICE model parameters of MOS. • Design and simulation of single bit Full adder circuit. • Design of resistive load MOS differential pair. • Simulation of CMOS differential amplifier. • Layout generation of NOT,AND & OR gates.

Major equipments in the Lab: • Xilinx • Desktop PC. • FPGA, CPLD Trainer

5. MICROWAVE ENGINEERING AND EM THEORY & TRANSMISSION LINE LABORATORY

This lab comprises of EM Theory & Transmission Line and Microwave lab. Each of them has different lab set-up and different experiments.

Experiments:

1. Measurement of wavelength, guide wavelength and frequency using X-band waveguide test bench. Calculation of broad wall dimension of a X-band waveguide. 2. Determination of phase and group velocity plot 3. Determination of basic parameters of a directional coupler using calibrated attenuator. 4. Klystron characteristics using X-band waveguide test-bench. 5. Study of Gunn Oscillator characteristics using X-band waveguide test-bench. 6. Measurement of reflection coefficient using two directional couplers and one calibrated attenuator. 7. Measurement of phase shift of a microwave phase shifter/Scattering matrix of a magic tee / E-plane tee / H-plane tee using waveguide test bench at X-band. 8. Measuring of dielectric constant of a material using waveguide test bench at X-band. 9. Measurement of Conduction EMI using LISN and spectrum analyzer Frequency response of RF amplifier using spectrum analyzer with tracking generator

Major Equipment in the Lab:

1. Various microwave sources – 2. Solid state source (Gunn diode) 3. Vacuum tube source (Klystron) 4. X- band Power meter with sensor 5. RF Power output meter 6. CRO Make- VSWR meter 7. Movable short Make, Slide screw tuner, Phase shifter 8. Multi hole directional coupler, E-H tuner, Magic, E- Plane, H Plane Tee, E-Plane Bend 9. Attenuator, Co-axial wave guide adapter, Precision short 10. Dielectric Liquid cell , Dielectric solid Cell with sample

5.A. EM THEORY & TRANSMISSION LINE LAB

Experiments:

a) Find and studies on the several of Standing Wave Pattern along a transmission line when the line is open-circuited, short circuited and terminated by a resistive load at the load end. b) Familiarization of Smith chart on MATLAB platform, for this experiment need to learn theory Smith chart & basic concept of MATLAB Software. c) To learn the radiation pattern of different type of antennas Eg: dipole, folded-dipole, 3-element Yagi-Uda antenna and measure HPBW & FNBW for corresponding antennas. d) Comparative study to find beam width, gain and radiation pattern of a 3-element, 5-element and 7-element parasitic array (Yagi-Uda) antenna. e) To calculate gain, directivity of a Pyramidal Horn Antenna with obtaining radiation pattern. f) Familiarization with different signal on Spectrum Analyzer. In the process student can learn the significances of the manufactures specifications etc.

Major Equipment in the Lab:

Antenna Trainer Kit with dipole, Yagi-Uda, Patch, Array Antenna Horn Antenna Set up with Reflex Klystron Transmission Line Trainer with different coaxial cable and load CRO Spectrum Analyzer Mechanical Turn Table E- Sect oral Horn H- Sect oral Horn Parabolic disc antenna Pyramidal horn

LIST OF EXPERIMENTAL SETUP FOR ELECTRICAL ENGINEERING DEPARTMENT

YEAR LABS LIST OF SET UPS FOR EXPERIMENTS

1ST

Basic Electrical Laboratory

Set up for Characteristics of Fluorescent Lamp Set up for Characteristics of Tungsten & Carbon filament lamp Trainer kit for Verification of Thevenin’s Theorem Trainer kit for Verification of Superposition Theorem Trainer kit for Verification of Norton’s Theorem Trainer kit for Verification of Maximum Power Transfer Theorem Set up for Study of RLC Series Circuit Set up for Calibration of ammeter & voltmeter Set up for Open Circuit & Short Circuit test of a single phase transformer Set up for No load characteristics of DC shunt generator Set up for Starting and reversing of speed of dc shunt motor and Speed control of dc shunt motor Set up for Measurement of power in a three phase circuit by two wattmeter method

2ND

Electrical & Electronics Measurement Laboratory

Setup for Calibrate moving iron and electrodynamometer type ammeter/voltmeter by potentiometer. Setup for Calibrate dynamometer type wattmeter by potentiometer. Setup for Calibrate AC energy meter. Setup for Measurement of resistance using Kelvin double bridge. Setup for Measurement of power using Instrument transformer. Setup for Measurement of power in Polyphase circuits. Setup for Measurement of frequency by Wien Bridge. Setup for Measurement of Inductance by Anderson bridge Setup for Measurement of capacitance by De Sauty Bridge. Setup for Measurement of capacitance by Schering Bridge

Electric Circuit Theory Laboratory

Trainer kit for Transient Response of R-L, R-C circuit. Trainer kit for Transient Response of R-L-C series & R-L-C parallel circuit. Trainer kit for Determination of Impedance(Z), Admittance(Y) parameter of two port network. Trainer kit for Frequency response of LP, HP filters. Trainer kit for Frequency response of BP, BR filters.

3RD Set up for Determination of the generalized constants A,B,C,D of long transmission line.

Power System Laboratory

Set up for Simulation of DC distribution by network analyzer. Set up for Measurement of earth resistance by earth tester. Set up for Dielectric strength test of insulating oil. Set up for Determination of break down strength of solid insulating material. Set up for Study of different types of insulator. Set up for Active reactive power control of alternator. Set up for Test to find out polarity, ratio & magnetization characteristics of CT & PT. Set up for Characteristics of under voltage relay and earth fault relay and over current relay. Set up for Study of different motor protection schemes.

Power Electronics Laboratory

Trainer kit for Study of the characteristics of an SCR. Trainer kit for Study of the characteristics of a Triac. Trainer kit for Study of different triggering circuits of an SCR. Trainer kit for Study of the operation of a single phase full controlled and half controlled bridge converter with R and R-L load. Trainer kit for Study of performance of single phase half controlled symmetrical and asymmetrical bridge converters Set up for Study of performance of step down chopper with R and L load.

Electrical Machine Laboratory

Setup for Study of the characteristics of a separately excited DC generator Setup for Study of the characteristics of a DC motor Setup for Study of the characteristics of a Compound DC generator(short shunt) Setup for Study of methods of speed control of DC motor Setup for Measurement of speed of DC series motor as a function of load torque Setup for Study of equivalent circuit of a single phase transformer Setup for Study of equivalent circuit of three phase induction motor by no load & blocked rotor test Setup for Study of performance of three phase squirrel cage induction motor- determination of iron loss, friction & windage loss Setup for Different methods of starting of a three phase squirrel cage induction motor & their comparison[DOL, Auto transformer, Star-Delta] Setup for Speed control of 3 phase squirrel cage induction motor by different methods & their comparison[voltage & frequency control] Setup for Determination of regulation of synchronous machine by potier reactance, synchronous impedance method Setup for Determination of equivalent circuit parameters of a single phase induction motor Setup for Load test on single phase induction motor to obtain the performance characteristics. Setup for To determine direct axis reactance & quadrature reactance of three phase synchronous machine by slip test Setup for To make connection diagram to full pitch & fractional slot winding of 18 slot squirrel cage induction motor for 6 poles & 4 pole operation Setup for study of different type of connection of three phase transformer Setup for load characteristics of wound rotor induction motor

4TH

Electrical

Drives Laboratory

Setup for experiment of Thyristor Control D.C drive. Setup for experiment of Chopper fed D.C drive. Setup for experiment of AC single phase motor speed control using TRIAC Setup for experiment of Regenerative and Dynamic Breaking Operation for a D.C motor Setup for experiment of Regenerative and Dynamic Breaking Operation for an A.C motor

LIST OF MACHINERIES/EQUIPMENTS IN THE ME DEPTT.

(A) WORKSHOP PRACTICE LAB:

Sl No Machines No of Item 1 Lathe 8 2 Milling 1 3 Shaping 1 4 Power Saw 1 5 Radial Drilling 1 6 Bench Drilling 2 7 Bench Grinding 2 8 Bending Machine 1 9 Surface Grinder 1

10 Tool Grinder 1 11 Shearing Machine 1 12 Bench Vice (Fitting & carpentry) 16 13 MIG welding set 1 14 ARC welding set 2 15 Gas welding set 1 16 Spot welding set 1

(B) FLUID MECHANICS LAB:

Sl No Machines No of Item 1 Discharge/Flow measurement

through Venturimeter & Orifice meter

1

2 Pitot Tube 1 3 Reynolds No Determination 1 4 Centrifugal Pump Test Rig 1 5 Reciprocating Compressor

Test Rig 1

6 V & Rectangular Notch Experimental set up

1

7 Air Blower Test Rig 1 8 Measure various losses

in fluid flow thro’ Pipes 1

(C) DYNAMICS OF MACHINES LAB

Sl No Machines No of Item 1 Cam follower analysis 1 2 Gyroscope 1 3 Universal Governor 1 4 Universal Vibration apparatus 1 5 Dynamic Balancing of masses 1

(D) METROLOGY & MEASUREMENT LAB:

Sl No Machines No of Item 1 Bevel Protractor 1 2 Screw Thread Micrometer 1 3 Gear tooth vernier micrometer 1 4 Sine Bar 1 5 Profile projector 1 6 Slip Gauges 1 7 Vernier Height Gauge 1 8 Surface cleaning machine 1 9 Dial Indicator 1

(E) ADVANCED MANUFACTURING LAB:

Sl No Machines No of Item 1 Ultrasonic Cleaner 1 2 Chemical Polishing & Etching 1 3 Robot 1

(F) MANUFACTURING LAB:

Sl No Machines No of Item 1 Sand mould mixing machine 1 2 GFN testing machine of sand 1 3 Sand Permeability testing machine 1 4 Sand Rammer 1 5 Moisture container testing apparatus 1 6 Green sand testing machine 1 7 Clay contain testing apparatus 1 8 Tilting furnace 1 9 Open hearth furnace 3 10 Swage block 3 11 Mould hardness tester 1

(G) MATERIAL TESTING & APPLIED MECHANICS LAB

Sl No Machines No of Item 1 Impact testing machine ( Izod & charpy ) 1 2 Spring testing machine 1 3 Cupping testing machine 1 4 Universal testing machine 1 5 Torsion testing machine 1 6 Hardness testing machine 1 7 Ultrasonic flaw detector 1 8 Fatigue testing machine 1 9 Microscope ( for Metallographic testing ) 1

(H) HEAT TRANSFER LAB

Sl No Machines No of Item 1 Thermal conductivity of metal bar apparatus 1 2 Thermal conductivity of liquid apparatus 1 3 Thermal conductivity of insulating powder apparatus 1 4 Forced convection apparatus 1 5 Natural convection apparatus 1 6 Pin-Fin apparatus 1 7 Cooling Tower apparatus 1 8 Emissivity test apparatus 1 9 Heat Exchanger apparatus 1 10 Throttling calorimeter apparatus 1

(I) THERMAL POWER ENGINEERING & IC ENGINE LAB

Sl No Machines No of Item 1 Fire tube Boiler (Model) 2 2 Water tube Boiler (Model) 2 3 2-stroke Petrol engine (Model) 1 4 4-stroke Diesel engine (Model) 2 5 Diesel engine with rope break 1 6 Diesel engine with electric break 1 7 4-stroke petrol engine with electric break 1

8 Flash point & Fire point apparatus (Open type) 1 9 Flash point & Fire point apparatus (Closed type) 1

Lab Details of AS&H Department:

Chemistry Lab Equipments: Conductometer, pH meter, Glass apparatus, Ostwald viscometer.

Physics lab Equipments: Spectrometer, Prism, Mercury Vapour Lamp, Travelling Microscope, Metallic Beam, Measuring Wts, MI Apparatus, Stop Watch, Slide Callipers, Screw Gauge, Laser Detector, Laser Set Up, Planck's Constant Set Up, Semiconductor, Power supply, Coil, Thermometer, CRT, Power Supply, Bar Magnet, Compass Box, Stand, Solar Cell Set Up, Gauss Meter, Digital millivoltmeter, EM, Semiconductor, Stefan's Constant Apparatus with EZ-81 diode Valve.

English Language Laboratory.

Computing Facilities: Internet Bandwidth: 48 mbps Number and configuration of System:

Intel Core i3 2130/2120, 2GB RAM, 160/250/320/500/1000 GB HDD, LED Monitor, Key Board, Mouse. All computers are connected through LAN.

Total number of system connected by LAN: 250 Total number of system connected by WAN: 110 computers are using WAN through NAT Major software packages available:

GCC, G++, JDK COMPILERS, VISUAL BASIC, NETBEANS, ECLIPSE, IDE, LINUX OS (MINT 17.3, UBUNTU MAT etc.), MYSQL

Special purpose facilities available:

JIO Wi-fi for students, Firewall protected Internet, Redundant Internet Connection, each having 20 mbps.

Innovation Cell:An Innovation cell in the name of startup centre has been formed to inculcate culture of innovation driven entrepreneurs and to nurture the young people towards the socio-economic development of the country.

Social Media Cell: To be formed shortly.

Compliance of the National Academic Depository (NAD), applicable to PGCM/ PGDM Institutions and University Departments: Not applicable.

List of facilities available

Games and Sports Facilities Different indoor and outdoor games and sports facilities are available in the campus. For example, table tennis, carom board, Cricket, Football, Volley ball, discus throw, javelline, shot put etc.

Extra-Curricular Activities: Cultural activities, Projects, Japanese Language skill, NSS Activities

Soft Skill Development Facilities: Soft Skills Development Lab has been specially formed in the Institute to train the students from the very beginning to make them industry-ready and self-groomed personality. Special emphasis is given on their GD Skills, Presentation Skills, Interview Techniques and so on.

Curricula and syllabus for each of the programmes as approved by the University: The Institute strictly follows the curricula and syllabus for each of the programmes as per MAKAUT,WB.

Academic Calendar of the University: As prescribed by MAKAUT, WB.

Academic Time Table with the name of the Faculty members handling the Course:

GLOBAL INSTITUE OF MANAGEMENT AND TECHNOLOGY, KRISHNAGAR, NADIA EVEN SEM ROUTINE: B.TECH, 1ST YEAR, 2ND SEMESTER, 2018-2019[REVISED]

ROOM NO : WS 307 (COMBINED )

ROOM NO : WS 305 ( EE & ECE)

DA Y

SECT ION

10:10 - 11:00

11:00 - 11:50 11:50 - 12:40

12:40 - 1:30

1:30 - 2:20 2:20 - 3:10 3:10 - 4:00

4:00 - 4:50

TU E

CSE BS CH 201 (AKS) ME 291(SKB)

R M 201 (SKD)

BS CH 291 (ADR , AKS)

ME, CE

M 201 (PDC)

EE, ECE

BS PH 201 (AKD) xxx BS PH 291 (AKD , IDB)

WE D

CSE HM HU 201 (LRM)

M 201 (PDC) BRIDGE COURSE PHYSICS

[IDB]

R BS CH 201 (AKS)

BRIDGE COURSE

MATHS[PSR]

xxx xxx

ME, CE

M 201 (SKD) xxx xxx

EE, ECE

BS PH 201 (AKD)

xxx xxx

TH US

CSE ES-CS201 (SND)

M 201 (PDC) BS PCH 201 (AKS)

R HM HU 291 (LRM) ES-CS291 [SND]

ME, CE

M 201 (SKD)

EE, ECE

BS PH 201 (AKD)

FRI CSE HM HU 201 (LRM)

M 201 (SKD) BRIDGE COURSE

CHEMISTRY[A DR]

R xxx xxx ES-CS291 [SND]

ME, CE

M 201 (PDC) xxx xxx

EE, ECE

ME 292 WP(SKH,MNP)

SA T

CSE ES-CS201 (SND) MOOCS & MAR [NRP]

R ME 291(BED)(S

KB) ME, CE EE, ECE

xxx xxx xxx xxx

GLOBAL INSTITUE OF MANAGEMENT AND TECHNOLOGY, KRISHNAGAR, NADIA EVEN SEM ROUTINE: B.TECH, 2ND YEAR, 4TH SEMESTER, 2018-2019 [REVISED]

ROOM NO: CE ( 305) ME( WS 402).EE ( 315), EE + ECE( 315) , ECE ( 407 ) CSE ( 410)

DA Y

SECTI ON

10:10 - 11:00

11:00 - 11:50

11:50 - 12:40

12:40 - 1:30

1:30 - 2:20 2:20 - 3:10 3:10 -

4:00 4:00 - 4:50

TU E

CE CE 401[UKS] M 402 (PDC) MCS 401 (PSR)

R

JAPANESE LANGUAGE

CLASS

HU 481 (PSB) GR. A// CE 493 GR B [SNR,TKD]

ME

SOFT SKILLS

MCS 401 (SKD)

ME 401(SJM)

ME 491. GR.A(RYP,NKK)/ME 494(GR.B)(RSB,BKR)

CSE XXXX SOFT SKILLS XXXX CS-492 [NKB]

ECE CH

401(ADR)

HU 401 (MTS)

SOFT SKILLS PH 401 (AKD) MICRO PROJECT

EE EE 402 [ SKG]

PH EE 401 (IDB)

EE 402 [ ADP]

EE 401 [ SGB/ CMK]

CE MCS 401 (PSR) CE 403[SNR] CE 492

WE D

ME ME 402(SKH) M 402 (PDC)

R

MCS(491) [KNC] ME 403(RSB)

CSE M 401 (PDC) CS 401 [DPS] CS 403 (ATR) CS493 (FAA)

ECE PH 401 (AKD) EC401 (NJM) CH 401 (ADR) PH 491 (AKD ,IDB)

EE PH EE 401

(IDB)

EE 401 [SGB]

ME (EE)411(CN

M)

EE 491 [ SGB, DJK ]

TH US

CE CE 402[CHB] CE 401[UKS] M 402 (PDC)

R

JAPANESE LANGUAGE

CLASS

MCS 491 GRA [KNC]// CE 491 GRB[UKS,TKD]

ME ME 403(RSB) SOFT SKILLS M 402 (PDC)

MCS 401

(SKD)

ME 493 GR.B (SVP,IJB)/ME 492 (RSB,MNP) GR.A

CSE CS 401 [DPS] CS 402(NKB) HU 481 (PSB)

ECE PH 401 (AKD) EC402 (SWD)

CH 401 (ADR)

EE ME

(EE)411(CN M)

PH EE 401 (IDB)

EE 401 [SGB]

EE 492 [ADP, DJK]

FRI

CE CE 401[UKS] CE 403[SNR]

R

HU 481 (PSB) GR. B// CE 493 GR A [SNR,TKD]

ME ME 401(SJM) M 402 (PDC) MCS 401 (SKD)

ME 403(RSB) xxx

CSE M 401 (PDC) CS 402(NKB) CS 491 [DPS]

ECE HU 401 (MTS)

EC401 (NJM) EC402 (SWD) TUTORIAL EC492(SWD,RKS)

EE ME EE 481(NF,SKB) PH 491 (AKD ,IDB)

SA T

CE M 402 (PDC) SOFT SKILLS CE 402[CHB]

R

MCS 491 GR B [RKC]// CE 491 GRA[UKS,TKD]

ME ME 491. GR.B(RYP,NKK)/ME 494(GR.A)(RSB,BKR)

ME 402(SKH)

ME 493 GR.A (SVP,IJB)/ME 492 (RSB,MNP) GR.B

CSE CS 403(ATR) M 401 (PDC) CS 401 [DPS] MCS 491(ATR)

ECE EC401 (NJM) EC402 (SWD)

HU 401 (MTS)

EC491(NM,RKS)

EE EE 401

[SGB] SOFT SKILLS

[TDD]

ME (EE)411(CN

M)

PH EE 401 (IDB)

EE 402 [ ADP]

GLOBAL INSTITUE OF MANAGEMENT AND TECHNOLOGY, KRISHNAGAR, NADIA EVEN SEM ROUTINE: B.TECH, 3RD YEAR, 6TH SEMESTER, 2018-2019 [REVISED]

ROOM NO: CE ( 109) , ME ( WS 401), .EE ( 208), EE + ECE (208 ) , ECE (406 ), CSE (202 ) . DA Y

SECTI ON 10:10 - 11:00 11:00 -

11:50 11:50 - 12:40

12:40 - 1:30

1:30 - 2:20

2:20 - 3:10

3:10 - 4:00

4:00 - 4:50

TU E

CE CE 693 GR A [CHB,NB] // CE 691 GR B [SRD,PND]

R

CE 601[SRD]

JAPANESE LANGUAGE

CLASS

CE 681 GR.A [PRB]

ME

ME 604A(TBD)

HU 611(TMS

)

ME 601(SJM)

ME 605A(IJB)

CSE CS605A (ATR) HU 601 (MTS)

CS 602 (SJB) CS693 (RKC)

ECE EC602 (DPS) EC 605A + EE 604C (RKC)

EC692 (DPS)

EE EE601 (SND) EE 603 [ SGB ] EE 693 [SGB, BKP ]

WE D

CE CE 602 [MAR] HU 601 (MTS)

R

CE 603 [PRB] CE 605C [CHB] xxx

ME ME 604A(TBD) ME 601(SJM) HU 611(TMS) ME 691(SKH,NKK)

CSE CS605A (ATR) CS 602 (SJB) CS603 (RKC) CS691 (RJD)

ECE EC603 (SWD) EC 605A + EE

604C (RKC)

EC601 (NJM) EC681 (SSR)

EE HU 601 (MTS) EE601 (SND) EE 602 [DJS] TECHNICAL SKILL

[CMK]

TH US

CE

CE 603 [PRB] CE

601[SRD] HU 601 (MTS)

R

CE 602 [MAR]

JAPANESE LANGUAGE

CLASS

CE 693 GR B [CHB,NB] // CE 692

GR A [SNS,PDS]

ME ME 602(DR. ABC/SKH) ME 603(SVP) ME 695(TDB,AJD)

CSE CS603 (RKC) SOFT SKILLS

CS 605A [ATR] CS681 (ALL)

ECE EC601 (NJM) EC602 (DPS)

EC 605A + EE 604C (RKC)

EC691 (NJM)

EE EE604 (PJD) EE 602 [DJS] EE 692 [DJS,BKP]

FRI

CE CE 605C [CHB] CE604B [SPG]

R

CE 603 [PRB]

CE 691 GR A [SRD,PND] // CE 692 GR B [SNS,PDS]

ME

ME 603(SVP)

HU 611(TMS

)

ME 605A(IJB)

ME 693 (SVP,BKK)

CSE CS 601 (RJD) CS604 (PDD) HU 601 (MTS)

xxx xxx xxx

ECE EC603 (SWD) EC604B+CS604A (PJD)

EE694C + EC695A (RKC) EE EE601 (SND) EE 602

[DJS] EE 603 [

SGB ]

SA T

CE CE 601[SRD] CE604B [SPG]

R

CE 681GR B [PRB]

ME ME 692(CNM/SKB) ME 694(SKH,NKK)

CSE EC604B+CS604 A (PJD)

CS 601 (RJD) CS692 (SJB)

ECE EC605A xxx

EE SOFT SKILLS EE604 (PJD)

HU 601 (MTS)

EE 603 [ SGB ] EE691 (SMD, SYB)

GLOBAL INSTITUE OF MANAGEMENT AND TECHNOLOGY, KRISHNAGAR, NADIA EVEN SEM ROUTINE: B.TECH, 4TH YEAR, 8TH SEMESTER, 2018-2019 [REVISED ]

ROOM NO: CE ( 304) , ME (WS 403 ) , EE ( 302 ) , ECE (308 ) , CSE ( 402) , DA Y

SECTI ON 10:10 - 11:00 11:00 -

11:50 11:50 - 12:40 12:40 - 1:30 1:30 - 2:20

2:20 - 3:10 3:10 - 4:00 4:00 -

4:50

TUE

CE

PROJECT II

ENVIRONMEN TAL

POLLUTION & CONTROL[SNS

]

HU 801 A(NRP)

R

JAPANE SE

LANGUA GE

CLASS

PROJECT II

ME ME 802D(RYP) SOFT SKILLS ME 803D [DPG]

EE EE 802B [ADP] EE 801B [SKG] EE 801B [SND] xxx PROJECT PART II(ALL)

ECE EC802C (PD) HU 801 A(NRP)

EC801C (SSR) EC881 (RKS + SSR)

CSE CS 801D [FAA] CS801D (FAA) CS892 (ALL)

WE D

CE PAVEMENT DESIGN[PRB] DESIGN PRACTICE SESSIONAL [CYB]

R

XXX XXX XXX

ME ME 802D(RYP) XXX ME 801 (HU)

(MTS) ME 881 [SVP]

EE EE 882 [ CMK, SYB] EE 802B [ADP] PROJECT PART II(ALL)

ECE XXX XXX HU 801 A(NRP)

XXX PROJECT PART II(ALL)

CSE XXX CS 801D [FAA] XXX CS892 (ALL)

TH US

CE

ENVIRONMENTAL POLLUTION &

CONTROL[SNS]

PROJECT II

R

JAPANE SE

LANGUA GE

CLASS

SKILL DEVELOPMENT CLASS

ME ME 801 (HU) (MTS) ME 803D [DPG] XXX PROJECT PART II(ALL)

EE EE 801 B [CMK] PROJECT PART II(ALL) HU 801

A(NRP) EE 882 [ CMK, SYB]

ECE SKILL DEVELOPMENT CLASS EC802C (PJD) EC881C (RKS + SWD)

CSE CS-802E (SJD) CS891 (ALL) CS892 (ALL)

FRI

CE PAVEMENT DESIGN[PRB] PROJECT II

R

DESIGN PRACTICE SESSIONAL [MAR]

ME ME 803D [DPG] XXX ME 801 (HU)

(MTS) XXX PROJECT PART II(ALL)

EE EE 802B [ADP] PROJECT PART II(ALL) HU 801 A(NRP) PROJECT PART II(ALL)

ECE XXX XXX XXX XXX PROJECT PART II(ALL)

CSE XXX XXX CS-802E (SJD) CS891 (ALL)

SAT

CE PAVEMENT DESIGN[PRB] PROJECT II HU 801

A(NRP)

R

XXX XXX XXX

ME ME 881(TKC) XXX PROJECT PART II(ALL)

EE SKILL DEVELOPMENT CLASS XXX XXX XXX XXX

ECE XXX XXX EC801C (SSR) PROJECT PART II(ALL)

CSE SKILL DEVELOPMENT CLASS XXX CS892 (ALL)

Teaching Load of each Faculty DEPERTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

LOAD DISTRIBUTION FOR EVEN SEM-2019

FACULTY NAME SUBJECT CODE LOAD YEA R DEPT TOTAL

LOAD

MR. PIJUSH DUTTA

INFORMATION THEORY & CODING

EC604B+CS604 A 3(THEORY) 3RD ECE+CSE (B.TECH)

9T

RENEWABLE ENERGY EC802C 3(THEORY) 4TH ECE(B.TECH )

DIGITAL SIGNAL PROCESSING

EE604 3 (THEORY)

3RD EE(B.TECH)

PROJECT PART 2 EC882 6(PROJECT )

4TH ECE(B.TECH )

MR. NILANJAN MUKHOPADHA Y

DIGITAL COMMUNICATION

EC601 3(THEORY) 3RD ECE(B.TECH )

7T+6L =13

DIGITAL COMMUNICATION LAB

EC691 3(LAB) 3RD ECE(B.TECH )

EM THEORY & TRANSMISSION LINES

EC401 4 (THEORY)

2ND ECE(B.TECH )

EM THEORY & TRANSMISSION LINES LAB

EC491 3 (LAB) 2ND ECE(B.TECH )


4TH ECE(B.TECH )

MR. DIPANKAR SAHA

COMMUNICATION ENGG& CODING

CS401 3(THEORY) 2ND CSE (B.TECH)

6T+6L =12

COMMUNICATION ENGG& CODING LAB

CS491 3(LAB) 2ND CSE (B.TECH)

DIGITAL SIGNAL PROCESSING

EC602 3(THEORY) 3RD ECE(B.TECH )

DIGITAL SIGNAL PROCESSING LAB

EC692 3(LAB) 3RD ECE(B.TECH )


4TH ECE(B.TECH )

MRS. SASWATI DEY

TELECOMMUNICATIO N SYSTEM

EC603 3 (THEORY)

3RD ECE(B.TECH )

7T+6L =13

DIGITAL ELECTRONICS AND INTEGRATED CIRCUITS

EC402 4(THEORY) 2ND ECE(B.TECH )

DIGITAL ELECTRONICS AND INTEGRATED CIRCUITS

LAB


DESIGN LAB EC881 3(LAB) 4TH ECE(B.TECH )

PROJECT-PART 2 EC882 6 (PROJECT)

4TH ECE(B.TECH )

MR. SUBHRAJIT SINHA ROY

CONTROL SYSTEM-II EE601 4(THEORY) 3RD EE(B.TECH) 7T+6L=1 3 CONTROL SYSTEM-II EE691 3(LAB) 3RD EE(B.TECH)

SATELLITE COMMUNICATION &

REMOTE SENSING

EC801C 3(THEORY) 4TH ECE (B.TECH)

SEMINAR EC681 3(LAB) 3RD ECE(B.TECH )

DESIGN LAB EC881 3(LAB) 4TH ECE(B.TECH )


4TH ECE(B.TECH )

MR. RAJKUMAR SAMANTA (T.A.)

COMMUNICATION ENGG & CODING

THEORY LAB

CS491 3 (LAB) 2ND CSE(B.TECH) 21L=21

EM THEORY & TRANSMISSION LINES LAB


DIGITAL ELECTRONICS AND INTEGRATED CIRCUITS LAB


DIGITAL COMMUNICATION

EC691 3 (LAB) 3RD ECE(B.TECH )

CIRCUIT DESIGN LAB EC881 6(LAB) 4TH ECE(B.TECH )

DEPARTMANT OF MECHANICAL ENGINEERING LOAD DISTRIBUTION

EVEN SEM 2018(B-TECH & DIPLOMA )

SL

NO. FACULTY/ TA. NAME OF THE SUBJECTS SEMESTE R

LOA D

TOTA L

SIGNATU RE

1

SUJIT MAUJUMDAR

IC Engine Lab 6TH 2*3

MANUFACTURING PROCESS-II (DIPLOMA)

4TH 2*4

2 TARUN KR.

CHATTARJEE

Design of m/c elements(dip) 6TH 2*2

Design of a Mechanical System

8TH

2*3* 2

3 TRIDIP KR.DAS Fluid Power Lab 6TH 2*2

Air Conditioning & Refrigeration Lab 6TH 2*3 4 SK. HIKMAT Workshop Prac.(B-Tech) 2ND 2*3

LOAD DISTRIBUTION OF EVEN SEM 2019

Machining & Machine Tools Lab 6TH 2*3

Dynamics of Machines Lab 6TH 2*3

5

SOVAN PATRA Material Testing Lab 4th 2*3

Design Practice-II 6th 2*3

THEORY OF M/C (DIPLOMA) 4TH 2*2

6

RAJARSHEE BASU ENGG. METROLOGY (DIPLOMA) 4th 2*2

Machine Drawing-II 4th 2*3 Primary Manufacturing Processes 4TH 2*3

7 REYYA PAWANI Fluid Mechanics & Hydraulics Lab 4TH 2*3

PROF. PRACTICE II (DIPLOMA) 4TH 2*3

8 INDRAJIT BHATTACHARJEE

Material Handling Lab(dip) 6TH 2*2

Professional Practice IV 6TH 2*4 Material Testing Lab 4TH 2*3

9

NITESH KR. KUNDU

Fluid Mechanics & Hydraulics Lab 4TH 2*3

Machining & Machine Tools Lab 6TH 2*3 Engg. Metrology Lab(Diploma) 4th 2*2

Dynamics of m/c. 4TH 2*3

10

MANOB PRADHAN

Manufacturing Technology Lab 4TH 2*3

Workshop Prac.(B-Tech) 2ND 1*4 THEORY OF M/C (DIPLOMA) 4TH 2*2

MANUFACTURING PROCESS-II (DIPLOMA)

4TH

2*4

11

SAMAR KR. BHOWMICK

BASIC ENGG.DRAWING (B.Tech)CE+ME+CSE

2ND

1*3+ 1

Thermal Power Engineering Lab(EE) 4TH 2*3 IC Engine Lab 6TH 2*3

Engg. Drawing (Diploma) Civil

2ND

2*3+ 1

Engg. Drawing (Diploma) ME

2ND

2*3+ 1

12

BIDYUT KARMAKAR

Machine Drawing-II 4TH 2*3

Design Practice-II 6TH 2*3 Thermal Engg. II lab(dip) 4th 2*2

13

ARIJIT DEY

Thermal Engg. II lab(dip) 4th 2*2

Air Conditioning & Refrigeration Lab 6TH 2*3 Fluid Power(dip) 6TH 2*2

SL. NO.

NAME

B.TECH DIPLOMA

2ND YEAR 3RD YEAR 4TH YEAR 2ND YEAR 3RD YEAR

THEO RY

PRAC TICAL THEORY PRACTI

CAL THEOR

Y PRAC TICAL THEORY PRACT

ICAL THEORY PRACTICA L

1

S.P.G. SIR

Prestres sed

Concret e

[ 3 ]

2

S.DAS

Highwa y &

Transpo rtation

Enginee ring [ 3 ]

Highwa y &

Transpo rtation Engg Lab

[ 3 + 3 ]

Irrigatio

n Enginee

ring [ 3 ]

Civil

Engg Lab II [ 3 + 3

]

3

S.ROY

Soil

Mech anics [ 4 ]

Soil Mecha

nics Lab -

I [ 3 + 3

]

Transpo rtation

Enginee ring I [ 3 ]

Rural

Engineerin g

[ 3 ]

4

P.BISWAS

Constru ction

Plannin g and

Manage ment [ 3 ]

Seminar [ 3 + 3 ]

Paveme

nt Design

[ 3 ]

Environmenta

l Engineering

[ 4 ]

Civil Engg Lab IV

[ 3 + 3 ]

5

S.SARKAR

Detailin g of RC

and Steel

Structur es

[ 3 + 3 ]

Environ mental Pollutio

n and Control

[ 3 ]

Geotech

nical Enginee

ring I [ 3 ]

Applic ation of CAD in Civil Engine ering I [ 3 + 3

]

6

U.K.SINGH

Fluid Mech anics [ 3 ]

Fluid

Mecha nics

[ 3 + 3 ]

Profes sional Practic

e II

[ 3 ]

Micro Irrigation

[ 3 ]

7

M.RASHID

Design

of Steel Structur e [ 3 ]

Struct ural

Engine ering

Design Practi ce[ 3 ]

Construction andDisasterM anagement[ 3

]

Civil

Engineerin gProject II[ 3 + 3 ]

8

P.K.SAHA

Advance d

Surveyi ng

[ 3 ] +

Estimati ng and Costing

[ 4 ]

Design of Steel Structure

[ 4 ]

Profession al Practice

IV [ 3 ]

9

C.BISWAS

Struc tural Analy

sis [ 4 ]

Material s

Handlin g [3]

CAD Laborat

ory [ 3 + 3 ]

Struct ural

Engine ering

Design Practi

ce [ 3 ]

10

P.SARKAR

Detailin g of RC

and Steel

Structur es

[ 3 + 3 ]

Civil

Engg Lab II [ 3 + 3

]

11

T.K.DEBN ATH

Soil Mecha

nics Lab -

I [ 3 + 3

]

Civil

Engineerin g

Project II [ 3 + 3 ]

12

N.BHATTA CHARYA

CAD Laborat

ory [ 3 + 3 ]

Applic ation of CAD in Civil Engine ering I [ 3 + 3

]

Civil Engg Lab IV

[ 3 + 3 ]

13

P.DAS

Fluid

Mecha nics

[ 3 + 3 ]

Highwa y &

Transpo rtation Engg Lab

[ 3 + 3 ]

DEPARTMENT OF APPLIED SCIENCE & HUMANITIES, LOAD DISTRIBUTION FOR EVEN SEM, 2018-2019

NAME OF THE FACULTY

SECTI ON

SEMESTE R PAPER NAME PAPER

CODE CLASSES /

WEEK TOTAL LOAD

SIGNAT URE

PROF.(DR.) SUJIT KR. DEY

PROFESSOR & HOD

B.TEC H

2ND (CE, ME, & ECE) MATHEMATICS-II M 201 2+2=4

(3+1T)

10

4TH (ME & CSE)

NUMERICAL METHODS MCS 401 3 (2L+1T)

4TH (BCA)

STATISTICS, NUMERICAL METHODS & ALGORITHMS

BM 401

3 (2L+1T)

4TH (CE) MATHEMATICS-III M 402 4 (3+1T) MR. PRANAB DAS

CHOWDHURY ASSISTANT PROFESSOR

(MATH)

B.TEC H

4TH (ME) MATHEMATICS-III M 402 2+2=4 (3+1T)

16

2ND (CSE) MATHEMATICS-II M201 4 (1+1T) 4TH (CSE) MATHEMATICS-III M 401 4 (3+1T)

B.TEC 4TH (CE) NUMERICAL MCS 401 3 (2L+1T)

MR. PRANTIK H METHODS BCA 2ND MATHEMATICS BM 201 4 (3+1T)

SINHA ROY

ASSISTANT 2ND (CE) ENGG.

4 (3+1T) 15

PROFESSOR DIPLO MATHEMATICS

(MATH) MA 2ND (ME) ENGG. 4 (3+1T)

MATHEMATICS

MR. ANIRUDDHA

ROY ASSISTANT PROFESSOR

(CHEM)

B.TEC H

4TH (ECE & EE)

ENVIRONMENTAL ENGINEERING CH 401 3

13

B.Pharm(2 ND)

ENVIRONMENTAL SCIENCE

2

2ND (CSE,ME &

CE)

CHEMISTRY-I

CH 291

1.5

DIPLO MA

2ND (CE) APPLIED CHEMISTRY 2

2ND (CE) APPLIED CHEM LAB (GR. A)

1

2ND (CE) APPLIED CHEM LAB (GR. B)

1

2ND (ME) APPLIED CHEM LAB (GR. A)

1

2ND (ME) APPLIED CHEM LAB (GR. B)

1

MR. ASOK KR SARKAR

ASSISTANT PROFESSOR

(CHEM)

B.TEC H

2ND (CE, ME & CSE) CHEMISTRY-I CH 201 4 (3+1T)

15

2ND (CSE) CHEMISTRY-I CH 291 1.5 2ND (ME &

CE) CHEMISTRY-I CH 291 1.5

BCA 4TH ENVIRONMENT AND ECOLOGY HU 401 3

DIPLO MA

2ND (ME) APPLIED CHEMISTRY 2

2ND (CE) APPLIED CHEM LAB (GR. A)

1

2ND (CE) APPLIED CHEM LAB (GR. B)

1

2ND (ME) APPLIED CHEM LAB (GR. A)

1

2ND (ME) APPLIED CHEM LAB (GR. B)

1

MR. AMIT KR. DAS ASSISTANT

PROFESSOR (PHY)

B.TEC H

2ND (ECE & EE) PHYSICS-I PH 201 4 (3+1T)

16.5

4TH (ECE) PHYSICS-II PH 401 4 (3+1T) 2ND (ECE

& EE) PHYSICS-I PH 291 1.5

4TH (EE) PHYSICS-II PH 491 1.5 4TH (ECE) PHYSICS-II PH 491 1.5

DIPLO MA

2ND (CE) APPLIED PHY LAB (GR. A)

1

2ND (CE) APPLIED PHY LAB (GR. B)

1

2ND (ME) APPLIED PHY LAB (GR. A)

1

2ND (ME) APPLIED PHY LAB (GR. B)

1

MR. ISHINDRA BISWAS

ASSISTANT PROFESSOR (PHY)

B.TEC H

4TH (EE) PHYSICS-II PH (EE) 401 4 (3+1T)

16.5

2ND (ECE & EE) PHYSICS-I PH 291 1.5

4TH (EE) PHYSICS-II PH 491 1.5 4TH (ECE) PHYSICS-II PH 491 1.5

DIPLO

MA

2ND (CE) APPLIED PHYSICS 2 2ND (ME) APPLIED PHYSICS 2

2ND (CE) APPLIED PHY LAB (GR. A)

1

2ND (CE) APPLIED PHY LAB (GR. B)

1

2ND (ME) APPLIED PHY LAB (GR. A)

1

2ND (ME) APPLIED PHY LAB (GR. B)

1

MR. PRASENJIT BHATTACHARJEEA

SSISTANT PROFESSOR (ENG)

B.TEC

H

4TH (CE) TRLP (GR.A) HU 481 3P

17

4TH (CE) TRLP (GR. B) HU 481 3P

4TH (ECE & CSE) TRLP(ALL) HU 481 3P

DIPLO MA

2ND (CE)

DEVELOPMENT OF SOFT SKILLS &

PROFESSIONAL PRACTICE-I

4 (1L+3P)

2ND (ME)


PROFESSIONAL PRACTICE-I

4 (1L+3P)

MS. LABANYA RAY MUKHERJEE ASSISTANT PROFESSOR

(ENG)

DIPLO

MA

4TH (ME)

DEVELOPMENT OF SOFT SKILLS & PROFESSIONAL

PRACTICE-II

3 (1L+2P)

19

BCA 2ND ENGLISH LANGUAGE AND COM HUN-201 5(3L+2P)

B.TEC H

2ND

ENGLISH LANGUAGE AND

COMMUNICATION

HM-HU 201

2(3+1T)

2ND

BUSINESS PRESENTATION AND

LANGUAGE LAB

MH-HU 291

2P

DIPLO

MA

4TH (CE)


PROFESSIONAL PRACTICE-II

3 (1L+2P)

BCA 2ND BPL LAB HUN-291 4P

MRS. MOUTUSI SARKAR

ASSISTANT PROFESSOR

(MNGT)

DIPLO MA

2ND (CE & ME)

BUSINESS ECONOMICS & ACCOUNTANCY

2+2=4

14

BTECH

6TH (CE) PRINCIPLE OF MANAGEMENT HU 601 2

6TH ( ECE & CSE)

PRINCIPLE OF MANAGEMENT HU 601 2

6TH ( EE) PRINCIPLE OF MANAGEMENT HU 601 2

8TH (ME) ECONOMICS FOR ENGINEERS

ME 801 (HU) 3

4TH (EE & ECE) VALUES & ETHICS HU 401 3

MS. NYMPHEA RUBRA PAUL(ENG)

B.TEC H 8TH (CE) ORGANIZAL

BEHAVIOUR HU 801 A 2 7

BHSM

8TH (EE) ORGANIZAL BEHAVIOUR HU 801 A 2

8TH (ECE &CSE)

ORGANIZAL BEHAVIOUR HU 801 A 2

2ND ENG COMM LAB HPM 296 1

MR. TRIDIVNATH DAS

ACCOUNT OFFICE ASSISTANT

(ACC)

BHM 2ND 2ND INTRODUCTING TO ACCOUNTING HPM 207 2

13

DIPLO MA

BTECH

2ND (CE)

BUSINESS ECONOMICS & ACCOUNTANCY

4

8TH (ME) ECONOMICS FOR ENGINEERS

ME 801 (HU) 3

NAME OF THE FACULTY

YEAR SEMEST

ER

PAPER NAME PAPER

CODE

CLASS ES /

WEEK

TOTAL LOAD

Mrs. Sagnika Bhattacharjee

( Assistant Professor & HOD)

2nd(B.Tec h) 4th, EE Electrical Machine - I EE 401 4

09 (Theory=6,Lab=

3)

2nd(B.Tec h) 4th, EE Electrical Machine - I Lab EE 491 1.5

3rd(B.Tec h) 6th Power electronics EE 603 4

3rd(B.Tec h) 6th Power electronics Lab EE 693 1.5

Mr. Arindam Pal ( Assistant Professor)

2nd(B.Tec h) 4th Electrical & Electronics

Measurement EE 402 3

09 (Theory=6,Lab=

3)

2nd(B.Tec h) 4th Electrical & Electronics

Measurement Lab EE 492 3

4th(B.Tec h) 8th Senser & Transducer EE 802 B 3

Mr.Deepjyoti

Santra ( Assistant Professor)

3rd(B.Tec h) 6th Power system II EE 602 4

13 (Theory=4,Lab=

9)

3rd(B.Tec h) 6th Power system II Lab EE 692 3

1st(Diplo ma)

2nd (CE) workshop practice x 6

Dr. Chandra Mohan Khan

( Assistant Professor)

2nd(Diplo ma)

4th (ME)

Elements of Electrical Engineering X 3

11(Theory=4,La b=7)

2nd(Diplo ma)

4th (ME)

Elements of Electrical Engineering Lab x 1

4th(B.Tec h) 8th Illumination Engg. EE 801B 1

4th(B.Tec h) 8th Electrical System II Lab EE 882 6

Mr. Kaushik Halder

1st(Diplo ma)

2nd (CE) Electrical Technology x 3

12

(Theory=6,Lab= 6)

Internal Continuous Evaluation System and place:

The Internal Continuous Evaluation System is very much followed at various theory as well as Laboratories during the semester of the academic year.

Student’s assessment of Faculty, System in place The Students’ feedback is taken in each semester for the faculty members and necessary action is taken by the HOD of the Department accordingly.

For each Post Graduate Courses give the following:

Not Applicable.

Special Purpose: Not applicable.

16. Enrollment of students in the last 3 years

Department 2016-17 2017-18 2018-19 CE

8 8 4

ME 10

5 6

EE 6

4 0

ECE 2

5 5

CSE 17

20 12

CE (Diploma)

56 54 43

ME (Diploma)

41 56 59

1st(Diplo ma)

2nd ( ME) Electrical Technology x 3

1st(Diplo ma)

2nd (ME) workshop practice x 6

17. List of Research Projects/ Consultancy Works: Not applicable. 18. LoA and subsequent EoA till the current Academic Year

F.No. Eastern/1-2460852863/2015/EOA Date: 07-Apr-2015

To,

The Secretary (Technical education) Govt. of West Bengal,

Bikash Bhawan, Room No. 602,

6th Floor Salt Lake, Kolkata-700091

Sub: Extension of approval for the academic year 2015-16

Ref: Application of the Institution for Extension of approval for the academic year 2015-16

Sir/Madam,

In terms of the provisions under the All India Council for Technical Education (Grant of Approvals for Technical Institutions) Regulations 2012 notified by the Council vide notification number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures and conditions prescribed by the Council from time to time, I am directed to convey the approval to

Regional Office Eastern Application Id 1-2460852863

Permanent Id 1-8256481

Name of the Institute GLOBAL INSTITUTE OF MANAGEMENT AND TECHNOLOGY

Institute Address PALPARA MORE,NH- 34,BHATJANGLA,KRISHNAGAR,NADIA, KRISHNAGAR, NADIA, West Bengal, 741101

Name of the Society/Trust

NATIONAL CENTER FOR DEVELOPEMENT OF TECHNICAL EDUCATION

Society/Trust Address 28/1, D. L. ROY ROAD, BOWBAZAR, KRISHNANAGAR,KRISHNAGAR,NADIA,West Bengal,741101

Institute Type Unaided - Private

Opted for change from Women to Co-ed

No Opted for change of name

No Opted for change of site

No

Change from Women to Co-ed approved

Not Applicable Change of name Approved

Not Applicable Change of site Approved

Not Applicable

To conduct following courses with the intake indicated below for the academic year 2015-16

All India Council for Technical Education

(A Statutory body under Ministry of HRD, Govt. of India)

7th Floor, Chandralok Building, Janpath, New Delhi- 110 001

PHONE: 23724151/52/53/54/55/56/57 FAX: 011-23724183 www.aicte-India.org

Application Number: 1-2460852863* Page 1 of 4

Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:13 May 2015

Printed By : AE2534701

Application Id: 1-2460852863 Course

Full/

Part

Tim

e

Affiliating Body

Inta

ke 2

014-

15

Inta

ke A

ppro

ved

for

15-1

6

NR

I App

rova

l sta

tus

PIO

App

rova

l sta

tus

Fore

ign

Col

labo

ratio

n Ap

prov

al s

tatu

s

Program Shift Level

ENGINEERING AND TECHNOLOGY

1st Shift

UNDER GRADUA TE

CIVIL ENGINEERING

FULL TIME

West Bengal University of Technology, Kolkata

120 120 NA NA

NA


1st Shift

UNDER GRADUA TE

COMPUTER SCIENCE & ENGINEERING

FULL TIME


60 60 NA NA

NA


1st Shift

UNDER GRADUA TE

ELECTRICAL ENGINEERING

FULL TIME


60 60 NA NA

NA


1st Shift

UNDER GRADUA TE

ELECTRONICS & COMMUNICATION ENGG

FULL TIME


60 60 NA NA

NA


1st Shift

UNDER GRADUA TE

MECHANICAL ENGINEERING

FULL TIME


60 60 NA NA

NA


2nd Shift

DIPLOMA CIVIL ENGINEERING

FULL TIME

West Bengal State Council of Technical Education, Kolkata

60 60 NA NA

NA


2nd Shift

DIPLOMA MECHANICAL ENGINEERING

FULL TIME


60 60 NA NA

NA

Note: Validity of the course details may be verified at www.aicte-india.org>departments>approvals

The above mentioned approval is subject to the condition that GLOBAL INSTITUTE OF MANAGEMENT AND TECHNOLOGY shall follow and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and the undertaking / affidavit given by







the institution along with the application submitted by the institution on portal.

In case of any differences in content in this Computer generated Extension of Approval Letter, the content/information as approved by the Executive Council / General Council as available on the record of AICTE shall be final and binding.

Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July 1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any action as defined under clause 9(4) of the said Regulation.

Dr. Avinash S Pant Actg Chairman, AICTE

Copy to:

1. The Regional Officer,

All India Council for Technical Education College of Leather Technology Campus Block LB, Sector III, Salt Lake City Kolkata - 700 098, West Bengal

2. The Director Of Technical Education,

West Bengal

3. The Registrar,


4. The Principal / Director,

GLOBAL INSTITUTE OF MANAGEMENT AND TECHNOLOGY PALPARA MORE,NH-34,BHATJANGLA,KRISHNAGAR,NADIA, KRISHNAGAR,NADIA,

West Bengal,741101

5. The Secretary / Chairman,

NATIONAL CENTER FOR DEVELOPEMENT OF TECHNICAL EDUCATION 28/1, D. L. ROY ROAD, BOWBAZAR, KRISHNANAGAR, KRISHNAGAR,NADIA,

West Bengal,741101

6. Guard File(AICTE)






To,






Sir/Madam,

In terms of the provisions under the All India Council for Technical Education (Grant of Approvals for Technical Institutions) Regulations 2012 notified by the Council vide notification number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures and conditions prescribed by the Council from time to time, I am directed to convey the approval to

Regional Office Eastern Application Id 1-2816274815


Permanent Id 1-8256481




Institute Type Unaided - Private Society/Trust Address 28/1, D. L. ROY ROAD, BOWBAZAR, KRISHNANAGAR,KRISHNAGAR,NADIA,West Bengal,741101

Opted for change from Women to Co-ed and Vice versa



No

Change from Women to Co-ed approved and Vice versa



Not Applicable



Full/

Part

Tim

e

Affiliating Body

Inta

ke 2

015-

16

Inta

ke A

ppro

ved

for

2016

-17

NR

I App

rova

l sta

tus

PIO

/ FN

/ G

ulf q

uota

Ap

prov

al s

tatu

s

Fore

ign

Col

labo

rario

n/Tw

inin

g Pr

ogra

m A

ppro

val

stat

us*

Program Shift Level





ENGINEERIN G AND TECHNOLO

1st Shift

UND ER GRA DUA

CIVIL ENGINEERING

FULL TIME


120 120 NA NA NA

Application Number: 1-2816274815 Page 1 of 3

Note: This is a Computer generated Report.No signature is required. Letter Printed On:25 April 2016


GY TE

ENGINEERIN G AND TECHNOLO GY

1st Shift

UND ER GRA DUA TE


FULL TIME


60 60 NA NA NA


1st Shift

UND ER GRA DUA TE


FULL TIME


60 60 NA NA NA


1st Shift

UND ER GRA DUA TE

ELECTRONICS & COMMUNICATI ON ENGG

FULL TIME


60 60 NA NA NA


1st Shift

UND ER GRA DUA TE


FULL TIME


60 60 NA NA NA


2nd Shift

DIPL OMA

CIVIL ENGINEERING

FULL TIME


60 60 NA NA NA


2nd Shift

DIPL OMA


FULL TIME


60 60 NA NA NA

The above mentioned approval is subject to the condition that GLOBAL INSTITUTE OF MANAGEMENT AND TECHNOLOGY shall follow and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and the undertaking / affidavit given by the institution along with the application submitted by the institution on portal.



Note: Validity of the course details may be verified at www.aicte-india.org





Dr. Avinash S Pant Vice - Chairman, AICTE

Copy to:

1. The Regional Officer, All India Council for Technical Education College of Leather Technology Campus Block LB, Sector III, Salt Lake City Kolkata - 700 098, West Bengal

2. The Director Of Technical Education,

West Bengal

3. The Registrar,




West Bengal,741101



West Bengal,741101






F.No. Eastern/1-3330396021/2017/EOA Date: 30-Mar-2017

To,






Sir/Madam,

In terms of the provisions under the All India Council for Technical Education (Grant of Approvals for Technical Institutions) Regulations 2016 notified by the Council vide notification number F.No.AB/AICTE/REG/2016 dated 30/11/2016 and norms standards, procedures and conditions prescribed by the Council from time to time, I am directed to convey the approval to

Permanent Id 1-8256481 Application Id 1-3330396021





Society/Trust Address 28/1, D. L. ROY ROAD, BOWBAZAR, KRISHNANAGAR,KRISHNAGAR,NADIA,West Bengal,741101

Institute Type Unaided - Private Region Eastern

Opted for change from Women to Co-ed and Vice versa



No

Change from Women to Co-ed approved and Vice versa



Not Applicable

Opted for Conversion from degree to diploma

No Opted for Conversion from diploma to degree

No Conversion (degree to diploma or vice-a- versa) Approved

Not Applicable



Full/

Part

Tim

e

Affiliating Body

Inta

ke

Appr

ove

d fo

r In

take

Ap

pro

ved

for

NR

I Ap

prov

al

stat

us

PIO

/ FN

/ G

ulf

quot

a/

Fore

ign

Col

labo

rar

ion/

Twin

ing

Prog

ram

Ap

prov

a

All India Council for Technical Education (A Statutory body under Ministry of HRD, Govt. of India)

Nelson Mandela MargVasant Kunj, New Delhi-110067

Program Shift Level





1st Shift

UND ER GRA DUA TE

CIVIL ENGINEERING

FULL TIME

Maulana Abul Kalam Azad University of Technology, West Bengal

120 120 NA NA NA


1st Shift

UND ER GRA DUA TE


FULL TIME


60 60 NA NA NA


1st Shift

UND ER GRA DUA TE


FULL TIME


60 60 NA NA NA


1st Shift

UND ER GRA DUA TE

ELECTRONICS & COMMUNICATI ON ENGG

FULL TIME


60 60 NA NA NA


1st Shift

UND ER GRA DUA TE


FULL TIME


60 60 NA NA NA


2nd Shift

DIPL OMA

CIVIL ENGINEERING

FULL TIME


60 60 NA NA NA


2nd Shift

DIPL OMA


FULL TIME


60 60 NA NA NA

The above mentioned approval is subject to the condition that GLOBAL INSTITUTE OF MANAGEMENT AND TECHNOLOGY shall follow and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and the undertaking / affidavit given by the institution along with the application submitted by the institution on portal.






Note: This is a Computer generated Report.No signature is required. Letter Printed On:8 April 2017 Printed By : AE2534701

Note: Validity of the course details may be verified at www.aicte-india.org

Copy to:


2. The Director Of Technical Education**,

West Bengal

3. The Registrar**,




West Bengal,741101



West Bengal,741101

Prof. A.P Mittal Member Secretary, AICTE


Note: ** - Approval letter copy will not be communicated through post/email. However, provision is made in the portal for downloading Approval letter through Authorized login credentials allotted to concerned DTE/Registrar.




Note: This is a Computer generated Report.No signature is required. Letter Printed On:8 April 2017 Printed By : AE2534701


Nelson Mandela Marg,Vasant Kunj, New Delhi-110070 Website: www.aicte-india.org

APPROVAL PROCESS 2018-19 Extension of Approval (EoA)


To,




Sub: Extension of Approval for the Academic Year 2018-19

Ref: Application of the Institution for Extension of approval for the Academic Year 2018-19

Sir/Madam,

In terms of the provisions under the All India Council for Technical Education (Grant of Approvals for Technical Institutions) Regulations 2016 notified by the Council vide notification number F.No.AB/AICTE/REG/2016 dated 30/11/2016 and amended on December 5, 2017 and norms standards, procedures and conditions prescribed by the Council from time to time, I am directed to convey the approval to

Permanent Id 1-8256481 Application Id 1-3510689536 Name of the Institute GLOBAL INSTITUTE OF

MANAGEMENT AND TECHNOLOGY Name of the Society/Trust NATIONAL CENTER FOR

DEVELOPEMENT OF TECHNICAL EDUCATION

Institute Address PALPARA MORE,NH- 34,BHATJANGLA,KRISHNAGAR,NA DIA, KRISHNAGAR, NADIA, West Bengal, 741101

Society/Trust Address 28/1, D. L. ROY ROAD, BOWBAZAR, KRISHNANAGAR,KRISHNAGAR,NA DIA,West Bengal,741101

Institute Type Unaided - Private Region Eastern

Opted for Change from Women to Co-Ed and vice versa

No Change from Women to Co-Ed and vice versa Approved or Not

NA

Opted for Change of Name No Change of Name Approved or Not

NA

Opted for Change of Site No Change of Site Approved or Not

NA

Opted for Conversion from Degree to Diploma or vice versa

No Conversion for Degree to Diploma or vice versa Approved or Not

NA

Opted for Organization Name Change

No Change of Organization Name Approved or Not

NA

To conduct following Courses with the Intake indicated below for the Academic Year 2018-19

Prog

ram

Shift

Leve

l

Cou

rse

FT/P

T+

A

ffilia

ting

Bod

y (U

niv/

Bod

y)

Inta

ke A

ppro

ved

for

2018

-19

NR

I App

rova

l St

atus

PIO

/ FN

/ G

ulf

quot

a/ O

CI/

App

rova

l Sta

tus

Fore

ign

Col

labo

ratio

n /T

win

ing

Prog

ram

A

ppro

val S

tatu

s*


2nd DIPLOMA MECHANICAL ENGINEERING

FT West Bengal State Council of Technical Education, Kolkata

60 NA NA NA


2nd DIPLOMA CIVIL ENGINEERING

FT West Bengal State Council of Technical Education, Kolkata

60 NA NA NA


1st UNDER GRADUATE

CIVIL ENGINEERING

FT Maulana Abul Kalam Azad University of Technology, West Bengal

120 NA NA NA

Application No:1-3510689536 Page 1 of 2

Note: This is a Computer generated Report. No signature is required.

Printed By : ae2534701 Letter Printed On:20 April 2018


1st UNDER GRADUATE



60 NA NA NA


1st UNDER GRADUATE



60 NA NA NA


1st UNDER GRADUATE

ELECTRONICS & COMMUNICATION ENGG


60 NA NA NA


1st UNDER GRADUATE



60 NA NA NA

+FT –Full Time,PT-Part Time


Strict compliance of Anti-Ragging Regulation: - Approval is subject to strict compliance of provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July 1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any action as defined under clause 9(4) of the said Regulation.

Prof. A.P Mittal Member Secretary, AICTE

Copy to:


2. The Director Of Technical Education**,

West Bengal

3. The Registrar**, West Bengal State Council of Technical Education, Kolkata

4. The Principal / Director, GLOBAL INSTITUTE OF MANAGEMENT AND TECHNOLOGY PALPARA MORE,NH-34,BHATJANGLA,KRISHNAGAR,NADIA, KRISHNAGAR,NADIA,

West Bengal,741101

5. The Secretary / Chairman, NATIONAL CENTER FOR DEVELOPEMENT OF TECHNICAL EDUCATION 28/1, D. L. ROY ROAD, BOWBAZAR, KRISHNANAGAR, KRISHNAGAR,NADIA,

West Bengal,741101


Note: Validity of the Course details may be verified at http://www.aicte-india.org/

** Individual Approval letter copy will not be communicated through Post/Email. However, consolidated list of Approved Institutions(bulk) will be shared through official Email Address to the concerned Authorities mentioned above.

Application No:1-3510689536 Page 2 of 2

Note: This is a Computer generated Report. No signature is required.

Printed By : ae2534701 Letter Printed On:20 April 2018

19. Accounted audited statement for the last three years

20. Best practices (if any):

i. Extensive student project scheme from 2nd year onwards. ii. Free GATE coaching

iii. Spoken English training from the beginning for making the students industry-ready iv. Technical collaboration (MOU) with Kalyani Govt. Engineering College for high-end

exposure.

mandatory disclosures of global institute of management

Documents