management of a sewerage network by coupling gis …
TRANSCRIPT
Larhyss Journal, ISSN 1112-3680, n°28, Dec 2016, pp. 167-179 © 2016 All rights reserved, Legal Deposit 1266-2002
© 2016 ABDELBAKI C. & al. Ceci est un article Libre Accès distribué sous les termes de la licence Creative Commons
Attribution (http://creativecommons.org/licenses/by/4.0), qui permet l'utilisation sans restriction, la distribution et la
reproduction sur tout support, à condition que le travail original soit correctement cité.
MANAGEMENT OF A SEWERAGE NETWORK BY COUPLING GIS
AND HYDRAULIC MODELING: A CASE STUDY OF THE NETWORK
OF THE NEW UNIVERSITY IN TLEMCEN, ALGERIA
ABDELBAKI C.1,2
, ROUISSAT B.1, CHAREF I.
1,
HADJ ABDELKADER A.1, AMMARI A.
3
1 Department of Hydraulics, Faculty of Technology, University of Tlemcen, Algeria
2 EOLE Laboratory, Team1: Water resources and mobilization, University of Tlemcen, Algeria,
3 Higher National School of Hydraulics, Blida, Algeria
ABSTRACT
The objective of this work is to ensure the management of the sewerage
network of the new university in Tlemcen using a MapInfo GIS and hydraulic modeling. Mapbasic subroutines are developed for the simulation of the
network behaviour for different return periods, based on the model of Caquot
(surface method). This model will generate strategies for managing rainwater
flux taking into account the weather conditions, topography and land use. The simulations done helped to highlight the influence of rainfall events on the
network. This methodology can help managers for decision-making by
addressing the shortcomings identified and may therefore provide a performance level of the optimal network operation.
Keywords: Sewerage network- GIS - Database - Network Modeling - Caquot
Model - Management - Rainwater.
RESUME
L’objectif de ce travail est d’assurer la getsion du réseau d’assainissement du
nouveau pôle universitaire de Mansourah en utilisant le système d’information
géographique (SIG) MapInfo et la modélisation hydraulique. Des sous programmes en langage Mapbasic sont développés pour la simulation du
comportement du réseau pour différentes périodes de retour, en se basant sur le
Abdelbaki C. & al. / Larhyss Journal, 28 (2016), 167-179
168
modèle de Caquot (méthode superficielle). Ce modèle permettra de générer des
stratégies de gestion des flux d’eaux pluviales en tenant compte des conditions
météorologiques, topographiques et occupation du sol. Les simulations effectuées ont permis de mettre en évidence les influences des événements
pluviométriques sur le réseau. Cette démarche permet d’assister les
gestionnaires dans la prise de décision pour remédier aux défaillances
éventuellement décelées et de garantir en conséquence, un niveau de rendement du fonctionnement du réseau optimal.
Mots clés : Réseau d’assainissement - SIG - Base de données - Modélisation du
réseau – Modèle de Caquot – Eaux pluviales
INTRODUCTION
People concentration in cities is increasing, thus the effort required in the
management of sewerage networks are becoming a priority task. The
complexity of this need make conventional management of sewerage networks difficult, hence the need methods to the use of computers (Abdelbaki and
Zerouali, 2012). Geographical information systems (GIS) are powerful tools for
handling spatial data, performing spatial analysis and manipulating spatial outputs. A GIS also provides a consistent visualization environment for
displaying the input data and results of a model. This ability of GIS is very
useful in a decision- making process (Vairavamoorthy et al., 2007). Development of a GIS model and production of the required information in
water utilities are very time consuming and expensive. It has been clear in
recent years that application of GIS in water and wastewater networks without
any link with hydraulic simulation models can not support all required management targets (Tabesh and Delavar, 2003). The integration of GIS and
models enables the utilisation of the advantages of both (Argent, 2004 ;
Vairavamoorthy et al., 2007 ; Abdelbaki and Touaibia, 2014 and Abdelbaki et al., 2016). Therefore, many upgrades and extensions have been developed for
the toolkit and presented in various research papers (Guidolin et al., 2010). In
this paper we present the modeling methodology of sewerage network of the new university in Tlemcen using MapInfo GIS and Map basic programming
language. The development of this coupling is to quantify storm water and
check the discharge capacity of the sewerage network for different return
periods. The surface method or Caquot model (Selmi and al., 2010) was programmed under Map basic language (Barbier, 2002) and subroutines are
developed to take advantage of a powerful modeling environment in GIS.
Management of a sewerage network by coupling GIS and hydraulic modeling: a case study of the network of the new university in Tlemcen, Algeria
169
PRESENTATION OF THE STUDY CASE
The new university center is located in the Northwest of the town of Tlemcen
(Figure 1), at a distance of 3 km from the capital of the municipality of Mansourah. It covers an area of 1,2 km
2. It has a capacity of 24000 students and
12000 beds. It is limited geographically by the urban group Kiffane North, the
urban group Bouhannak South, the urban group of Imama in the East and the
habitat agglomeration of El Koudia West.
The study area has a complex rainfall influenced by a Mediterranean climate
with hot dry season in summer, and another rainy and cold in winter. The
distribution of annual precipitation shows a rainy period, which runs from October to April with a peak in January. Annual precipitation fluctuates
between 500 and 800 mm (Bensaoula et al., 2007). The calculated average
rainfall is 560 mm / year, average temperatures range between 5 ° C in January
and 34 ° C in August (ONM, 2011)
Figure 1 : Presentation of the study area
The sewerage network of the new university center of Tlemcen is unitary, with
a length of 15,21 km. The slopes vary from 20 to 35%. The diameters of the
collectors vary from 300 to 1250 mm. The number of manholes is 327 (ONA,
2012). The discharge pattern of the network of the new pole of Tlemcen University depends on various parameters: the topography, the geographical
distribution of buildings, the installation of pipes in buildings, the conditions of
Abdelbaki C. & al. / Larhyss Journal, 28 (2016), 167-179
170
the release, the economic aspect, the possibilities connections and the impact
caused on the environment. Dividing sub basins reflects the following
characteristics: soil type, level curves, roads and existing roads and slopes.
METHODOLOGY
The approach adopted is to analyze and to understand the operation of the
sewerage network of the new pole University of Tlemcen, then exploiting data
to perform a diagnostic study of the network, because the current operation of the latter has several problems. The application developed in this paper is
intended to simulate the operation of the network of the new pole University of
Tlemcen under GIS (MapInfo) using the Caquot model (surface method), for rainfall events of different return periods, to test the ability of the network to
evacuate the flow of rainwater and thus provide the means of protection of the
new university of Tlemcen pole against flooding. The approach is shown in
figure 2.
Figure 2 : Methodology Flowchart
Management of a sewerage network by coupling GIS and hydraulic modeling: a case study of the network of the new university in Tlemcen, Algeria
171
Implementation of GIS for the sewerage network of the new university
The various features including GIS enable them to acquire the network plans
and their associated characteristics (Cheng-I Ho et al., 2010, Abdelbaki and Touaibia 2014). Then associated with each "layer" or level displayed a theme to
a different scale. Can be assigned to each object on the network, the
alphanumeric information associated (Blindu, 2004). These systems are
therefore particularly well suited to the representation of sewerage networks (Abdelbaki and Zerouali, 2012). The GIS of the sewerage network of the new
university pole of Tlemcen lies in the facility to allow spatial analysis by
crossing the layers of information stored in the database (Abdelbaki and Touaibia, 2014).
Sewerage network modeling
The surface method called Caquot model (Selmi, et al., 2010) is well adapted to
calculate storm water flows, as surface formulas for sanitation of cities, are commonly used to urbanized watersheds. The collectors of the storm sewerage
network are designed to prevent flooding from the rain and for protection.
A Map Basic language program (Barbier, 2002) was developed based on the model of Caquot, allowing one hand, the background map display of sewerage
data and the other display sewerage with its geometric and hydraulic
characteristics based on the simulation of it for different return periods. The general architecture of the application is given in figure 3.
The objective is to facilitate access to data of different databases, ensure
communication between the software and the user in the various tasks to
accomplish: data loading, calculating, displaying results...
Abdelbaki C. & al. / Larhyss Journal, 28 (2016), 167-179
172
Figure 3 : Organization menu of the application
Application presentation
The developed application is organized by a set of menus and routines: A
custom menu is created, it has to appeal to the tasks in data loading menus, calculation and display of data, figures (4a, 4b, 4c) loading data for the
developed application (Data Menu).
Management of a sewerage network by coupling GIS and hydraulic modeling: a case study of the network of the new university in Tlemcen, Algeria
173
a) Displaying the background map
b) Display the sewerage network
Figure 4 : Presentation of the developed application (data loading).
Menu "Calcul" consists of a single command" Procédure Globale de Calcul (Global Procedure of Calculation)" shown in Figure 5. This procedure computes
all parameters of the sewerage network of the new university pole based on the
model of Caquot, starting with the calculation of the peak flow in each basin,
then passing to calculate the mass flow rates and groups in parallel and check the conditions of self curage.
Abdelbaki C. & al. / Larhyss Journal, 28 (2016), 167-179
174
Figure 5 : Menu Overview The "Calcul"
Menu "Affichage des résultats (Display Results)" has three sub menus: Flow of
each basin, sewerage design and simulation results for different return periods. Figure 6 shows the display calculation results of each sub-basin, after sizing.
Figure 6 : Displaying flow rates for each sub-basin
Menu "Retour au menu MapInfo (Back to MapInfo menu)" (Figure 7) returns to
the standard menu of MapInfo.
Figure 7 : Menu Overview The "Retour au menu Mapinfo (Back to MapInfo
menu)"
Management of a sewerage network by coupling GIS and hydraulic modeling: a case study of the network of the new university in Tlemcen, Algeria
175
RESULTS AND DISCUSSION
The implementation of GIS for the sewerage network of the new university of
Tlemcen and its modeling was used to analyze it for different return periods. Several scenarios were studied to simulate its behavior. Figures (8a, 8b, 8c)
show geometric and hydraulic characteristics of the collectors after the
simulation.
a) Displaying of the numbers of collectors and manholes
b) Displaying of lengths and slopes of the collectors
Abdelbaki C. & al. / Larhyss Journal, 28 (2016), 167-179
176
c) Displaying simulation results of a collector
Figure 8 : Geometric and hydraulic characteristics of collectors
The results of the sewerage network simulation are summarized in the following
sections:
Discharges
The collectors must be able to pass the highest instantaneous flow rates taking into account the peak flow (Selmi et al, 2010). Figure 9 shows the distribution
of flow and diameters in the sewerage network for a return period of 10 years.
Figure 9 : Overview of flows and collectors diameters
Management of a sewerage network by coupling GIS and hydraulic modeling: a case study of the network of the new university in Tlemcen, Algeria
177
Velocity
The water velocity in the pipes should be in the order of 0,6 to 4 m/s. Velocities
in excess than 4 m/s, as well as those less than 0,6 m/s are to be avoided (Selmi et al., 2010). Low velocities favor the formation of deposits which are difficult
to evacuate and those greater than 4 m/s possible to consider internal pipes
erosion.
For a return period of 20 years, velocity varies between 1,17 and 5,23 m/s, self curage requirements are met for all collectors. The velocity in 24% of collectors
exceeds the standards (V> 4 m / s), from where a possible charging.
For a return period of 50 years, velocity varies between 1,30 and 5,76 m/s, the conditions for self curage are met for all collectors. The velocity in 34% of
collectors exceeds the standards (V> 4 m /), from where a large loading.
Based on the results for the sewerage network of the new University of
Tlemcen, and to improve the characteristics of the latter, the geometry of the network is to review and rehabilitation operations are necessary to correct the
geometric characteristics of the network. This is of great importance for
satisfactory hydraulic characteristics for the velocity (risk of erosion of the internal collectors).
The analysis determined effective in the management of sewerage new
university. The developed application is a decision support tool for the exploitation of the network. The input operations, storage and updating of data
allow to store a history of operational problems (renewal, realignment ...) useful
for forecasts of interventions on the network.
CONCLUSION
In this paper, we identified the hydraulic performance of the sewerage network
of the new pole University of Tlemcen and this by developing a coupling
between the GIS MapInfo and a model calculation developed based on the superficial method. This methodology provides network operators a
management tool to:
Know the network at any point;
Analyze malfunction with an instant response to any incident that
may occur there;
Know the status of the selected particular point.
Abdelbaki C. & al. / Larhyss Journal, 28 (2016), 167-179
178
This is an operating methodology for the manager to make the diagnosis of its
network, to explore solutions to problems and predict future situations.
It will be used to generate storm water flow management strategies taking into account the weather conditions to optimize the efficiency of the sewage network
but also to reduce operating costs.
REFERENCES
ABDELBAKI C., BENCHAIB M. M., BENZIADA S., MAHMOUDI H., GOOSEN M.
(2016). Management of a water distribution network by coupling GIS and hydraulic modeling: A case study of Chetouane in Algeria, Applied Water Science.
doi:10.1007/s13201-016-0416-1
ABDELBAKI C., TOUAIBIA B. (2014). Apport des systèmes d’information
géographique et de la modélisation hydraulique dans la gestion des réseaux
d’alimentation en eau potable - Cas du groupement urbain de Tlemcen (Algérie), TSM (5) 52-60 (2014), DOI: http://dx.doi.org/10.1051/tsm/201405052
ABDELBAKI C., ZEROUALI M. (2012). Modélisation d’un réseau d’assainissement et
contribution à sa gestion a l’aide d’un système d’information géographique - Cas du
chef-lieu de commune de Chetouane-wilaya de Tlemcen Algérie, Larhyss Journal,
N°10, pp. 101-113
ARGENT R.M. (2004). An overview of model integration for environmental
application components, frameworks and semantics. Environmental Modeling and
Software 19 (3), 219-234.
BARBIER P. (2002). Module d’initiation à la programmation MAP-BASIC V.5.0.1,
2002, ENSG, 47 p.
BENSAOULA F., ADJIM M., BENSALAH M. (2007). L’importance des eaux
karstiques dans l’approvisionnement en eau de la population de Tlemcen, Larhyss journal, N° 6, 57-64.
BLINDU I. (2004). Outil d'aide au diagnostic du réseau d'eau potable pour la ville de
Chisinau par analyse spatiale et temporelle des dysfonctionnements hydrauliques.
Thèse de doctorat, Ecole nationale supérieure des mines de Saint-Etienne, France,
304 p.
CHENG-I H., MIN-DER L., SHANG-LIEN L. (2010). Use of a GIS-based hybrid
artificial neural network to prioritize the order of pipe replacement in a water
distribution network, Environ. Monit. Assess., 166:177–189, DOI 10.1007/s10661-
009-0994-6
GALGALE H.M., GORANTIWAR S.D. (2007). IRAWDS: A GIS-based risk analysis
tool for water distribution systems, Environmental Modelling & Software, 22, 951-
965
Management of a sewerage network by coupling GIS and hydraulic modeling: a case study of the network of the new university in Tlemcen, Algeria
179
GUIDOLIN M., BUROVSKIY P., KAPELAN Z., SAVIC D.A. (2010). CWSNet: An
object-oriented toolkit for water distribution system simulations, Water Distribution
System Analysis, WDSA2010, Tucson, AZ, USA, Sept. 12-15, 2010, 1694 p.
Office National de l’assainissement (ONA). (2012). Rapport d’exploitation, 46 p.
Office National de météorologie (ONM). (2011). Extrait de synthèse des données
météorologiques.
SELMI B., SATIN M., BOURRIER R. (2010). Guide technique de l'assainissement,
Éditions du Moniteur, 4ème édition, 776 p.
TABESH M., DELAVAR M.R. (2003). Application of integrated GIS and hydraulic
models for unaccounted for water studies in water distribution systems, Advances in
Water Supply Management, Proceedings of the CCWI '03 Conference, London, 15-17 September 2003, Edited by Cedo Maksimovic , Fayyaz Ali Memon , and David
Butler , Taylor & Francis , Print ISBN: 978-90-5809-608-1, eBook ISBN: 978-0-
203-83366- 7, DOI: 10.1201/NOE9058096081.ch14)Vairavamoorthy K., Yan J.,