maklumat korporat adtec shah alam · 2019-11-01 · mengesahkan penerimaan aduan dalam tempoh 24...

MAKLUMAT KORPORAT ADTEC SHAH ALAM

ADTEC SHAH ALAM COORPORATE INFORMATION

Piagam Pelanggan/ Client’s Charter

Visi, Misi dan Objektif/ Vision, Mission and Objective

Maklumat Korporat/ Corporate Info

Struktur Organisasi/ Organization Structure

PEMBANGUNAN TENAGA MAHIR

SKILLS RESOURCE DEVELOPMENT

Tawaran Kursus/ Courses Offered

Pengambilan Pelajar/ Student Intake

Keluaran Pelajar/ Student Output

Kursus Separuh Masa/ Part Time Courses

PENINGKATAN KUALITI LATIHAN

QUALITY TRAINING IMPROVEMENT

Pembangunan Kurikulum/ Curriculum Development

Pembangunan Tenaga Pengajar/ Instructors Development

Pengiktirafan Program/ Program Recognition

JARINGAN KERJASAMA DENGAN INDUSTRI DAN KOMUNITI

NETWORK COLLABORATION WITH INDUSTRY AND COMMUNITY Kerjasama Industri/ Industrial Collaboration

Jawatankuasa Penasihat Teknikal (TAC)/

Technical Advisory Committee (TAC)

Lawatan Industri/ Industrial Visit

PENCAPAIAN DAN KEJAYAAN

SUCCESSES AND ACHIEVEMENTS Pencapaian / Inspirasi/Achievements / Inspirations

Penghargaan Staf(APC)/ Staff Appreciation (APC)

27

4

12

21

37

KEWANGAN

FINANCE

KEMUDAHAN LATIHAN

TRAINING FACILITIES

Asrama, Dewan Makan dan Kafeteria

Hostel, Dinning Hall dan Cafeteria

Pusat Sumber dan Multimedia

Library and Multimedia Center

Pembiayaan Perbadanan Tabung Pembangunan Kemahiran

Skill Development Fund Corporation Loan Facilities (PTPK)

SENARAI KURSUS JANGKA PENDEK

LIST OF SHORT–TERM COURSES

SENARAI INSTITUSI LATIHAN JABATAN TENAGA MANUSIA

(ILJTM)

LIST OF TRAINING INSTITUTIONS (ILJTM)

HAL EHWAL PELAJAR

STUDENT AFFAIRS Kebolehkerjaan/ Employability

Ko-kurikulum/ Co-Curriculum

Kaunseling/ Counselling Unit

Alumni

Anugerah Pelajar/ Students Award

40

49

53

56

61

Menjelaskan semua tuntutan bil bayaran dalam tempoh 7 hari dari tarikh

penerimaan dokumen lengkap

Clarify all bill payment claims within 7 days from the date of receipt of

complete documents

Mengesahkan penerimaan aduan dalam tempoh 24 jam dan memberi

maklumbalas aduan dalam tempoh 7 hari bekerja

Validate receipt of the complaint within 24 hours and respond to complaint with-

in 7 working days

Membayar elaun wang saku kepada pelajar yang layak selewat-lewatnya pada

10hb berikutnya

To pay allowances to eligible students not late than day 10 of the following month

Mengedarkan slip keputusan peperiksaan pelajar pada setiap semester dalam

masa 2 minggu selepas tarikh akhir Mesyuarat Jawatankuasa Kecil Peperiksaan

dan Persijilan

Distribute student examination results slip within 2 weeks after the deadline of the

Examination and Certification Sub-Committee Meeting

Memastikan setiap pelanggan yang berusan di kaunter akan dilayan

dalam tempoh masa 15 minit

Ensure that each customer at the reception counter will be attended to within

15 minutes.

6

Annual Report | 2018

PERUTUSAN KETUA PENGARAH | DIRECTOR GENERAL’S MESSAGE

YBhg Datuk Muhd Khair Razman Bin Mohamed Annuar

Ketua Pengarah Jabatan Tenaga Manusia

Director General of Manpower Department

Assalamualaikum dan Salam sejahtera

Dalam era Revolosi Industri 4.0 masa kini, pemain-

pemain uatam TVET dan industri perlu memanfaatkan

“Industry Forward”, iaitu dasar negara mengenai Industri

4.0 dari 2018-2025, dalam meningkatkan keupayaan dan

daya saing masing-masing. Kerjasama pihak industri dan

institusi Pendidikan teknikal dan latihan vokasional (TVET)

perlu dipertingkatkan dalam memastikan padanan

antara penawaran dengan permintaan bagi membantu

institusi TVET tempatan menyediakan kursus

berteraskan industri berteknologi tinggi berdasarkan

kehendak semasa industri di Malaysia. Sebagai agensi

tunggal di bawah JTM yang telah diiktiraf olah CAAM,

ADTEC Shah Alam perlu kekal releven dalam

mengendalikan kursus Penyelenggaraan Kapal Terbang

supaya graduan lepasan ADTEC Shah Alam sentiasa

mendapat keutamaan industri penyelenggaraan kapal

terbang samaada di Malaysia ataupun di luar negara.

ADTEC Shah Alam juga perlu mempergiatkan aktiviti

promosi ke seluruh pelusuk tanahair bagi meningkatkan

enrolment pelajar sepenuh masa pada tahun yang

mendatang dan memperkasakan pelaksanaan kursus

jangka pendek yang sentiasa menjadi keutamaan

daripada pihak industri maupun pekerja industri secara

individu.

Akhir kata, tahniah dan jutaan terima kasih kepada

semua warga ADTEC Shah Alam dan pihak terlibat yang

telah memberikan komitmen yang tinggi bagi mencapai

kecermelangan dan merealisasikan usaha yang

dirancang pada tahun 2018.

Sekalung tahniah juga diucapkan kepada

Jawatankuasa yang telah berjaya menerbitkan Laporan

Tahunan ADTEC Shah Alam bagi tahun 2018.

Dengan nama Allah Yang Maha Pemurah lagi Maha Penyayang.

In the current era of the Industrial Revolution 4.0, TVET

players and the industries need to leverage on Industry

Forward, the national policy on Industry 4.0 from

2018-2025, to enhance their capabilities and

competitiveness. Collaboration among industries and

Technical and Vocational Education and Training (TVET)

institutions needs to be enhanced in ensuring a match

between supply and demand to help the local TVET

institutions provide high-tech industry-based courses

based on current industrial requirements in Malaysia. As

the sole agency under the JTM, accredited by CAAM,

ADTEC Shah Alam needs to remain relevant in

conducting Aircraft Maintenance Course so that ADTEC

Shah Alam graduates are always the priority to aircraft

maintenance industries whether in Malaysia or abroad.

ADTEC Shah Alam also need to intensify its promotional

activities across the country to increase full-time student

enrolment in the coming years and to strengthen the

implementation of short-term courses which are always a

priority for the industries and independent candidates.

Last but not least, my heartiest congratulations and

gratitude to all ADTEC Shah Alam staffs and patrons for

their commitments in achieving excellence and

co-operation to materialize the plans for year 2018.

Congratulations! To the committee members who has

successfully published the ADTEC Shah Alam Annual

Report for year 2018.

7


Sistem latihan kemahiran di ILJTM khususnya di ADTEC

Shah Alam telah banyak menyumbangkan kepada

kebolehkerjaan para graduan sama ada di sektor

industri dalam dan luar negara. Pada tahun 2018,

seramai 316 pelajar telah menamatkan pengajian di

ADTEC Shah Alam.

ADTEC Shah Alam menawarkan latihan kemahiran

mengikut peredaran teknologi semasa. “Smart

partnership” dan Latihan Sangkut Industri (LSI) di industri

diadakan bagi memastikan peningkatan kemahiran dan

pendedahan teknologi terkini pada pensyarah dan

pelajar.

Sebagai sebuah Pusat Bertauliah yang telah lama

beroperasi, ADTEC Shah Alam bukan sahaja memberi

peluang latihan kepada pelajar sepenuh masa, malah

ianya terbuka kepada individu atau pekerja industri

tempatan yang berminat. Kursus Jangka Pendek ini

mendapat permintaan yang tinggi dengan jumlah

22,099 penyertaan sejak 2014 sehingga Disember 2018.

Dengan itu, saya berharap ADTEC Shah Alam akan

terus cemerlang dalam melahirkan graduan yang

berkemahiran dan profesional dalam era Industri 4.0 ini.

PERUTUSAN PENGARAH | DIRECTOR’S MESSAGE

Assalamualaikum dan salam sejahtera,

Tuan Haji Zuraka Bin Yusof

Pengarah ADTEC Shah Alam

Director of ADTEC Shah Alam

The skills base training system at ILJTM in particular at

ADTEC Shah Alam has contributed greatly to the

graduates' ability in both the domestic and foreign

industry sectors. In 2018, 316 students have graduated

from ADTEC Shah Alam.

ADTEC Shah Alam offers skills training based on

current technology available. 'Smart partnership' and

Industry-based Training (IBT) are held to ensure the most

up-to-date skills and technology exposure to lecturers

and students.

As an accredited Training Centre, ADTEC Shah Alam

not only provides full-time training opportunities, but also

opened to all interested independent candidates or

local industry personnel. This Short Term Courses meets a

very high demand with a total of 22,099 participants

throughout year 2018.

Therefore, I hope ADTEC Shah Alam will continue to

excel in producing highly skilled and professional

graduates in this era of Industry 4.0.

ADTEC Shah Alam merupakan salah sebuah institusi

latihan di bawah Jabatan Tenaga Manusia (JTM)

yang ditubuhkan bagi membangun tenaga kerja

mahir yang kompeten melalui latihan berteknologi

tinggi seiring wawasan kerajaan untuk menjadi

sebuah negara maju menjelang 2020. Melalui

Rancangan Malaysia Ketujuh (RMK 7), ADTEC Shah

Alam dibina di kawasan perindustrian Bukit

Kemuning di atas tapak seluas 40 ekar dan telah

siap pembinaan sepenuhnya pada tahun 2000.

Pada Julai 2001, ADTEC Shah Alam telah

memulakan operasi dengan membuat

pengambilan pertama pelajar seramai 107 orang.

Y.A.B. Dato’ Seri Abdullah bin Hj. Ahmad Badawi

selaku Timbalan Perdana Menteri pada masa itu

telah merasmikan ADTEC Shah Alam pada 11

Januari 2003.

Penyelenggaraan Kapal Terbang merupakan

bidang yang diperkenalkan pada tahun 2006

kepada 8 bidang sedia ada bagi menampung

keperluan tenaga kerja yang tinggi dengan

kerjasama National Aerospace and Defence

Industries (NADI). Pada Julai 2011, program Sijil ini

telah dinaiktaraf kepada Diploma Teknologi

Penyelenggaraan Kapal Terbang untuk

pengambilan pertama.

ADTEC Shah Alam is one of the training institutions

under the Manpower Department (JTM) established

to develop competent skilled manpower through

high technology training in line with the

government's vision of becoming a developed

nation by 2020. Through the Seventh Malaysia Plan

(RMK 7), ADTEC Shah Alam was built at Bukit

Kemuning industrial estate on 40 acre area and was

fully completed in 2000. In July 2001, ADTEC Shah

Alam commenced operations with the first intake of

107 students. Y.A.B. Dato’ Seri Abdullah bin Hj.

Ahmad Badawi as Deputy Prime Minister at that time

had officiated ADTEC Shah Alam on 11th January

2003.

Aircraft Maintenance Training was introduced in

2006 into the existing programs to accommodate

high requirements for skilled manpower in

collaboration with National Aerospace and Defense

Industries (NADI). In July 2011, this Certificate

program was upgraded to Diploma in Aircraft

Maintenance Technology .

ADTEC SHAH ALAM CORPORATE INFORMATION

8


Selain daripada itu, melalui program

Malaysia–Japan Automotive Industry

Co-Operation (MAJAICO) yang merupakan

inisiatif di bawah Perjanjian Kerjasama Ekonomi

Malaysia–Jepun yang ditandatangani pada Julai

2006, JTM dipertanggungjawabkan untuk

mengendalikan projek MAJAICO B iaitu

kerjasama di antara Kementerian Sumber

Manusia (KSM) dan Japan External Trade

Organization (JETRO). Projek MAJAICO B yang

dijalankan oleh JTM dan NISSAN ini bertujuan

menjalankan aktiviti latihan kepada pensyarah di

institusi latihan serta memperluaskan kemahiran

sedia ada ke tahap yang lebih tinggi untuk

melatih tenaga kerja industri.

Sehingga Disember 2018, ADTEC Shah Alam telah

mengeluarkan seramai 4,672 orang graduan

dalam pelbagai bidang kemahiran termasuk

Kimpalan, Pembuatan (Pemesinan), Jaminan

Kualiti, Komputer (Sistem), Penyejukbekuan dan

Penyamanan Udara, Mekatronik, Elektronik,

Elektrik Kuasa dan Penyelenggaraan Kapal

Terbang. Para graduan lepasan ADTEC Shah

Alam telah memasuki pasaran industri bukan

sahaja di dalam malahan di luar negara.

On top of that, the Malaysia-Japan Automotive

Industry Co-Operation (MAJAICO) program which

was one of initiative under the Malaysia-Japan

Economic Cooperation Agreement signed in July

2006, ADTEC Shah Alam was selected to

conduct the MAJAICO B project which was

responsible for technical training cooperation and

technology transfer between the Ministry of

Human Resources and Japan External Trade

Organization (JETRO). The MAJAICO B project ran

by ADTEC Shah Alam and NISSAN was aimed in

conducting training activities for lecturers at train-

ing institutions and extending existing skills to high-

er levels to train employees from the industry.

By the end of December 2018, ADTEC Shah Alam

has produced 4,672 graduates in various skills

including Welding, Manufacturing (Machining),

Quality Assurance, Computer (System),

Refrigeration and Air Conditioning, Mechatronics,

Electronic, Electrical Power and Aircraft

Maintenance. The graduates of ADTEC Shah Alam

have entered to the local industry and also

abroad.

9


10


ORGANIZATION CHART ADTEC SHAH ALAM

Jumlah keseluruhan perjawatan ADTEC Shah

Alam pada 31 Disember 2018 adalah seramai 134

orang, terdiri daripada 103 orang staf teknikal dan

31 orang staf sokongan.

The total number of ADTEC Shah Alam posts on

31 December 2018 are 134 staff, consist of

103 technical staff and 31 support staff.

Perjawatan Mengikut Bahagian

Personnel By Division

Jumlah

Total

Operasi Latihan.

Training Operation 74

Pengurusan Sumber

Human Resource Management 28

Khidmat Pengurusan

Service Management 18

Pengurusan Latihan

Training Management 8

Pengurusan Tertinggi

Top Management 6

Jumlah

Total 134

Perjawatan Mengikut Klasifikasi

Perkhidmatan

Personnel By Service Classification

Jumlah

Total

Pendidikan Latihan Vokasional (Gred DV)

Vocational Training Officer (DV Grade) 105

Pentadbiran (Gred N)

Administration (N Grade) 14

Sosial (Gred S)

Social (S Grade) 4

Perkhidmatan Pendidikan

(Gred DG)

Education (DG Grade)

4

Kemahiran (Gred H)

Technical (H Grade) 3

Kewangan (Gred W)

Finance (W Grade) 2

Teknologi Maklumat (Gred F)

Information Technology (F Grade) 2

Jumlah

Total 134

11 Annual Report | 2018

KEDUDUKAN PERJAWATAN STAFF POSITION

PE

MB

AN

GU

NA

N

TE

NA

GA

M

AH

IR

DE

VE

LO

PM

EN

T O

F S

KIL

LE

D L

AB

OU

R

DIPLOMA TEKNOLOGI PERINDUSTRIAN JAMINAN KUALITI

Tempoh Kursus: 2 tahun

Persijilan: Diploma Teknologi dan Diploma Kemahiran

Malaysia (Tahap 4)

Kelayakan Masuk: Sijil Kemahiran Malaysia Tahap 2

dalam bidang berkaitan

DIPLOMA TEKNOLOGI KEJURUTERAAN JAMINAN KUALITI


Persijilan: Diploma Teknologi Kejuruteraan dan Diploma

Kemahiran Malaysia (Tahap 4)

Kelayakan Masuk: SPM (minimum 3 kepujian dalam

Matematik, Sains dan satu subjek lain)

Keterangan Kursus:

Kursus-kursus ini memberi penekanan kepada

penggunaan standard jaminan kualiti dan prosedur

dalam mengekalkan proses dan produk bagi

memenuhi spesifikasi yang ditetapkan. Pelajar akan

didedahkan kepada pengetahuan dan kemahiran

mengenai pengukuran, kalibrasi, CAD mekanikal,

pengurusan kualiti, metrologi dan pengujian yang

diperlukan oleh industri.

Course Information:

This course emphasizes on the use of standard

quality assurance and procedure in maintaining the

product and process to meet the set of specification.

Students are exposed to knowledge and skills in

measurement, calibration, mechanical CAD, quality

management, metrology and testing as required by

the industry .

DIPLOMA IN QUALITY ASSURANCE INDUSTRIAL

TECHNOLOGY

Course duration: 2 years

Certification: Diploma in Technology and Malaysian

Skills Diploma (Level 4)

Entry Requirement: Malaysia Skills Certificate Level 2 in

related fields.

DIPLOMA IN QUALITY ASSURANCE ENGINEERING

TECHNOLOGY


Certification: Diploma in Engineering Technology and

Malaysian Skills Diploma (Level 4)

Entry Requirement: SPM (minimum 3 credits in

Mathematics, Science and another optional subject).

TAWARAN KURSUS | COURSES OFFERED

Kursus Sepenuh Masa di Jabatan Mekanikal

Full Time Courses in Mechanical Department

13


DIPLOMA KEMAHIRAN MALAYSIA KIMPALAN

Tempoh Kursus: 3 tahun 6 bulan

Persijilan: Diploma Kemahiran Malaysia (Tahap 4)

Kelayakan Masuk: Lulus SPM

Keterangan Kursus:

Kursus ini memberi penekanan kepada pengetahuan

dan kemahiran mengenai rekabentuk fabrikasi dan

kimpalan. Para pelajar akan dilatih dalam pelbagai

proses kimpalan seperti SMAW, GTAW, GMAW dan

aktiviti-aktiviti lain yang berkaitan dengan kerja-kerja

fabrikasi mengikut standard dan prosedur yang

ditetapkan.

Course Information:

This course emphasizes on knowledge and skills in

fabrication design and welding. Students are trained

in various welding processes such as SMAW, GTAW,

GMAW and other activities related to fabrication

according to the set standards and procedures.

DIPLOMA MALAYSIAN SKILLS IN WELDING TECHNOLOGY

Course duration: 3 years 6 months

Certification: Diploma in Malaysian Skills (Level 4)

Entry Requirement: Pass SPM

DIPLOMA TEKNOLOGI PERINDUSTRIAN PEMBUATAN

Tempoh Kursus: 1 tahun 6 bulan

Persijilan: Diploma Teknologi dan Diploma Kemahiran

Malaysia (Tahap 4)


dalam bidang berkaitan

DIPLOMA TEKNOLOGI KEJURUTERAAN PEMBUATAN


Persijilan: Diploma Teknologi Kejuruteraan dan Diploma


Kelayakan Masuk: SPM (minimum 3 kepujian dalam

Bahasa Malaysia, Matematik dan Sains)

Keterangan Kursus:

Kursus-kursus ini direka bentuk dan dibangunkan sejajar

dengan kemahiran dan pengetahuan yang diperlukan

oleh industri terutamanya dalam pemesinan

menggunakan mesin konvensional dan CNC. Para

pelajar akan dilatih mengenai rekabentuk,

pengaturcaraan, turning, milling dan grinding untuk

memastikan aktiviti pembuatan dijalankan mengikut

standard dan prosedur yang ditetapkan.

DIPLOMA IN MANUFACTURING ENGINEERING

TECHNOLOGY


Certification: Diploma in Engineering Technology

and Malaysian Skills Diploma (Level 4)


Bahasa Malaysia, Mathematics and Science)

DIPLOMA IN MANUFACTURING INDUSTRIAL TECHNOLOGY

Course duration: 1 year 6 months

Certification: Diploma in Technology and Diploma in

Malaysian Skills (Level 4)


entry qualification related fields

Course Information:

These courses are designed and developed in line

with the skills and knowledge required by the indus-

try especially in machining using conventional

machinery and CNC. Students are trained in

design, programming, turning, milling, and

grinding to ensure that all manufacturing

activities are carried out according to the set

standards and procedures.

DIPLOMA TEKNOLOGI KEJURUTERAAN PEMBUATAN

AUTOMOTIF


Persijilan: Diploma Teknologi Kejuruteraan dan

Diploma Kemahiran Malaysia (Tahap 4)

Kelayakan Masuk: SPM ( minimum 3 kepujian dalam

Matematik, Sains dan satu subjek lain)

Keterangan Kursus:

Kursus ini memberi penekanan kepada pengetahuan

dan kemahiran dalam kerja-kerja pembuatan dan

pemasangan kenderaan automotif. Para pelajar juga

dilengkapkan dengan kemahiran pengurusan

pengeluaran serta penyelenggaraan automasi di

industri automotif serta aktiviti lain yang berkaitan

standard dan prosedur yang ditetapkan.

DIPLOMA IN AUTOMOTIVE MANUFACTURING

TECHNOLOGY


Certification: Diploma in Engineering Technology

and Malaysian Skills Diploma (Level 4)


Mathematics, Science and one other subject)

14


Course Information:

This course emphasizes on knowledge and skills in

automotive vehicle manufacturing and installation.

Students are equipped with skill in production

management and automotive industry.

PRA-DIPLOMA TEKNOLOGI PENYELENGGARAAN

KAPAL TERBANG

Tempoh Kursus: 6 bulan ( Asas Kejuruteraan)

Persijilan: Pra-Diploma

Kelayakan Masuk: SPM (minimum 3 kepujian

termasuk Bahasa Melayu, Bahasa Inggeris,

Matematik / Matematik Tambahan atau Fizik /

Sains)

DIPLOMA TEKNOLOGI PENYELENGGARAAN KAPAL

TERBANG


Persijilan: Diploma Teknologi dan Diploma


Kelayakan Masuk: SPM (minimum 4 kepujian

termasuk Bahasa Inggeris, Matematik, Fizik / Sains

dan satu subjek lain)

Keterangan Kursus:

Kursus-kursus ini memberi penekanan kepada amalan standard penyelenggaraan pada kerangka pesawat udara, sistem avionik dan enjin serta memastikan kualiti aktiviti penyelenggaran pesawat mengikut piawaian. Para pelajar akan didedahkan dengan pengetahuan dan kemahiran yang diperlukan oleh industri penerbangan k h u s u s n y a ‘ A p p r o v e d M a i n t e n a n c e Organization’ (AMO) pesawat berdasarkan CAAM Part 66 Kategory A. Pelajar juga diberi subjek tambahan lain bagi persediaan untuk kelayakan Kategori B sebagai pembangunannkerjaya mereka.

Course Information:

These courses emphasize on standard maintenance

practices on the aircraft frame, avionic systems and

engine as well as ensuring that the quality of aircraft

maintenance is according to knowledge and skills

required by the aviation industry especially Approved

Maintenance Organization (AMO) of aircraft based on

CAAM Part 66 Category A. Students are also given

additional subjects as preparation for Category B

qualification for their career development.

PRE-DIPLOMA IN AIRCRAFT MAINTENANCE TECHNOLOGY

Course Duration: 6 months (Engineering Basics)

Certification: Pre-Diploma

Entry Requirement: SPM (minimum 3 credits including

Bahasa Melayu, English, Mathematics / Additional

Mathematics or Physics / Science)

DIPLOMA IN AIRCRAFT MAINTENANCE TECHNOLGY



Malaysian Skills (Level 4)

Entry Requirement: SPM (minimum 4 credits including

English, Mathematics, Physics / Science and another

optional subject)

15


DIPLOMA TEKNOLOGI PERINDUSTRIAN ELEKTRIK KUASA


Persijilan: Diploma Teknologi dan Diploma Kemahiran Malaysia (Tahap 4)


dalam bidang berkaitan.

Keterangan Kursus:

Kursus-kursus ini memberi penekanan kepada latihan

teori dan amali dalam menggunakan peralatan ujian

dan perlindungan pemasangan, peralatan industri,

kendalian mesin dan sistem agihan bekalan, membuat

pemasangan dan pemeriksaan bekalan elektrik,

menyelenggara sistem pneumatik, hidraulik dan

automasi, bekalan kecemasan, transformer, kotak

kawalan janakuasa dan kemahiran penyeliaan kerja‐

kerja berkaitan elektrik.

Course Information:

These courses emphasize on theory and practical

training in the use of testing equipment and installation

protection, industrial equipment, machine handling

and supply distribution system, installation and

examination of electrical supply, maintenance of

pneumatic, hydraulic and automation systems,

emergency supply, transformer, generator control

box and maintenance of electrical-related works.

TAWARAN KURSUS | COURSES OFFERED

Kursus Sepenuh Masa di Jabatan Elektrikal

Full Time Courses in Electrical Department

16


DIPLOMA TEKNOLOGI KEJURUTERAAN ELEKTRIK KUASA

Tempoh Kursus: 3 tahun 6 bulan Persijilan: Diploma Teknologi Kejuruteraan dan Diploma Kemahiran Malaysia (Tahap 4)

Kelayakan Masuk: SPM ( minimum 3 kepujian dalam Matematik, Sains dan satu subjek lain.

DIPLOMA IN ELECTRICAL POWER ENGINEERING TECHNOLOGY

Course Duration: 3 years 6 months



Entry Requirement: SPM (minimum 3 credit in


DIPLOMA IN ELECTRICAL POWER INDUSTRIAL TECHNOLOGY


Certification: Diploma in Technology and Diploma in Malaysian Skills (Level 4)

Entry Requirement: Malaysia Skills Certificate Level 3 in related fields

DIPLOMA TEKNOLOGI KEJURUTERAAN AUTOMASI DAN

ROBOTIK


Persijilan: Diploma Teknologi Kejuruteraan dan

Diploma Kemahiran Malaysia (Tahap 4)

Kelayakan Masuk: SPM ( minimum 3 kepujian dalam

Matematik, Sains dan satu subjek lain

DIPLOMA TEKNOLOGI PERINDUSTRIAN

KOMPUTER (SISTEM)

Tempoh Kursus : 1 tahun 6 bulan

Persijilan : Diploma Teknologi dan Diploma


Kelayakan Masuk : Sijil Kemahiran Malaysia Tahap

3 dalam bidang berkaitan

Keterangan Kursus:

Pelajar diberi latihan mengenai pembangunan dan

rekabentuk sistem dalam pelbagai aplikasi,

komunikas i data , pemprosesan i mej ,

penye len g gar aan d an me mb ai kpu l i h ,

mengenalpasti masalah berkaitan perisian dan

sistem.

DIPLOMA IN AUTOMATION AND ROBOTIC ENGINEERING

TECHNOLOGY




Entry Requirement: SPM (minimum 3 credit in


Course Information:

This course is a combination of electronics and

mechanical technology through emphasis on

automation systems and the wide use of robots. The

objective of the course is to train students to use various

systems such as hydraulic and electro-hydraulic,

pneumatic and electro pneumatic, electric and

electronics, automation and robotic systems. Students

are also trained to design and develop as well as

modify and upgrade systems or equipment used in the

processing and manufacturing industries.

Keterangan Kursus:

Kursus Ini adalah gabungan daripada teknologi

elektronik dan mekanikal dengan memberi

penekanan kepada sistem automasi dan

penggunaan robot yang meluas. Objektif kursus ini

adalah untuk melatih pelajar supaya boleh

menggunakan pelbagai sistem seperti hidraulik

dan elektro‐ hidraulik, pneumatik dan

elektro‐pneumatik, sistem elektrik & elektronik,

sistem automasi dan sistem robotik. Pelajar juga

akan dilatihr boleh merekabentuk dan

membangunkan atau mengubahsuai dan

mempertingkatkan sistem atau peralatan yang

digunapakai dalam industri proses dan

pembuatan.

DIPLOMA IN COMPUTER INDUSTRIAL TECHNOLOGY

(SYSTEM)

Course duration: 1 year 6 months


Malaysian Skills (Level 4


related fields.

Course Information:

Students are given training in system development

and design in various applications, data

communications, image processing, maintenance and

repairing, identifying problems with software and

systems.

17


Program

1/2018 2/2018

Intake Enrolment Intake Enrolment

EK01- Diploma in Welding Engineering Technology 0 0 0 0

EK03- Diploma in Manufacturing Engineering Technology 0 23 15 25

EK04 - Diploma in Quality Assurance Engineering

Technology 0 4 12 16

EK15 - Diploma In Automotive Manufacturing Engineering


EL01 - Diploma in Electrical Power Engineering Technology 0 75 21 80

EL02 - Diploma in Electronics Engineering Technology 0 0 0 0

EL05 - Diploma in Refrigeration and Air-conditioning

Engineering Technology 0 33 13 37

EL12 - Diploma in Mechatronics Engineering Technology 0 0 0 0

EL13 – Diploma in Automations and Robotics Engineering


G01 - Diploma in Computer System Engineering Technology 0 27 0 27

K01 - Diploma in Welding Technology 25 49 23 72

K03 - Diploma in Manufacturing (Machining) Technology 20 51 0 35

K04 - Diploma in Quality Assurance 12 29 0 29

K13 - Diploma in Aircraft Maintenance Technology 22 205 24 184

L01 - Diploma in Electrical Power Technology 25 65 20 58

L05 - Diploma in Refrigeration and Air-conditioning


ZF01- Malaysia Skills Certificate (Computer System) 0 0 0 0

ZA02- Malaysia Skills Certificate Manufacturing 0 0 0 0

ZA08- Malaysia Skills Certificate-Welding 0 0 0 0

ZA14- Malaysia Skills Certificate –Quality Assurance 0 0 0 0

Total 139 696 148 683

PENGAMBILAN PELAJAR PENGAMBILAN SEPENUH MASA FULL TIME STUDENT INTAKE

18


KONVOKESYEN 2018 2018 CONVOCATION

19


No Course

Code Courses

Output Session

1/2018

Output Session

2/2018

Industrial Technology Diploma

1 G01 Diploma in Computer System Technology - 27

2 K01 Diploma in Welding Technology - 24

3 K03 Diploma in Manufacturing (Machining) Technology 14 15

4 K04 Diploma in Quality Assurance - 18

5 K13 Diploma in Aircraft Maintenance Technology 5 7

6 L01 Diploma in Electrical Power Technology 26 14

7 L05 Diploma in Refrigeration and Air-conditioning Technology 1 -

8 L05 Diploma in Refrigeration and Air-conditioning Technology 13 -

TOTAL 59 105

Engineering Technology Diploma

9 EK15 Diploma In Automotive Manufacturing Engineering

Technology 15 7

10 EK03 Diploma in Manufacturing (Machining) Engineering

Technology 11 -

11 EL01 Diploma in Electrical Power Engineering Technology 17 24

12 EL05 Diploma in Refrigeration and Air-conditioning Engineering

Technology 9 -

13 EL13 Diploma in Automations and Robotics Engineering

Technology 2 6

14 K13 Diploma in Aircraft Maintenance Engineering Technology 16 45

TOTAL 70 82

Selain daripada kursus sepenuh masa, ADTEC Shah Alam

juga menjalankan kursus jangka pendek kepada

pekerja-pekerja industri dan orang perseorangan. Kursus

jangka pendek ini terdiri daripada seminar, kursus

modular dan kursus customized. Kursus modular ialah

kursus yang dirangka oleh ADTEC secara khususnya

ditawarkan kepada umum manakala kursus customized

ialah kursus yang di buat khas atas permintaan pihak

industri atau agensi. Seramai 3944 orang peserta telah

mengikuti 260 bilangan kursus jangka pendek dalam

pelbagai bidang kemahiran di ADTEC Shah Alam

sepanjang tahun 2018.

Apart from full-time courses, ADTEC Shah Alam also

conducts part-time courses to industrial workers and

individuals. Part-time courses consist of seminars,

modular and customized programmes. The modular

course is a course designed by ADTEC specifically to

be offered to the public while customized courses

are courses made at the request of the industry or

agency. A total of 3944 participants attended

part-time courses in various areas of expertise at

ADTEC Shah Alam throughout 2018.

Tahun/Year Bil Peserta/Participants

(2014-2018)

2014 3545

2015 5011

2016 5043

2017 4556

2018 3944

Total 22,099

KURSUS JANGKA PENDEK PART TIME COURSE

20


PART TIME COURSE 2014 - 2018

PE

NIN

GK

ATA

N

KU

ALIT

I LA

TIH

AN

EN

HA

NC

EM

EN

TS

OF

TR

AIN

ING

QU

ALIT

Y

KURIKULUM

No Date Meeting Venue

1 13th March 2018 Quality Assurance

Implementation Committee

Meeting 1/2018

Meeting Room, ADTEC Shah

Alam

2 10th April 2018 Quality Assurance


Meeting 2/2018


Alam

3 20th September 2018 Quality Assurance


Meeting 3/2018


Alam

4 27th December 2018 Quality Assurance


Meeting 4/2018


Alam

5 13th September 2018 Syllabus Development

Meeting 1/2018

Resource Centre, ADTEC Shah

Alam

6 7th & 8th February 2018 Diploma in Engineering

Technology Syllabus Revise

Meeting 1/2018

Discussion Room, ADTEC Shah

Alam

7 8th & 9th March 2018 Diploma in Engineering


Meeting 2/2018


Alam

8 14th March 2018 Diploma in Engineering


Meeting 3/2018


Alam

9 2nd October 2018 Diploma in Engineering


Meeting 4/2018


Alam

CURRICULUM DEVELOPMENT

22


Program pembangunan latihan untuk tenaga

pengajar adalah bertujuan untuk memastikan

perkhidmatan yang diberikan lebih mantap,

meningkatkan kemahiran dan kepakaran dalam

bidang masing-masing. Ianya merangkumi kursus

kewangan, pengurusan, pembangunan teknikal

termasuk ‘soft skill’. Kaedah pembangunan adalah

melalui kursus, seminar, bengkel, sangkutan industri

dan lain-lain kaedah berkaitan dengan kerja harian.

The training development programme for instructors are

aimed at ensuring the services rendered are more

robust, improved skills and expertise in their respective

fields. It covers financial courses, management,

technical development including soft skills. Methods of

development used are through courses, seminars,

workshops, industrial attachments and other methods

related to their daily works.

No Gred/Kumpulan

Grade/Group

Bilangan Anggota

No of Staff

Bilangan Anggota Yang

Hadir Kursus > 7 hari

Number of Members Who

Attend the Course > 7 days

1. Pengurusan & Professional/

Management & Professional

(Grade 41 - 54) 56 52

2. Sokongan 1 / Support staff 1

(Grade 17- 40) 73 62

3. Sokongan 2 / Support staff 2

(Grade 1 – 16 ) 4 1

Jumlah/ Total 133 115

Kakitangan yang menghadiri kursus sepanjang 2018

Staff attending courses throughout 2018

Program pembangunan akademik pengajar bagi tahun 2018

Instructor's academic development program for 2018

Kelayakan

Qualification

Sijil Kemahiran /Skills Certificate

Sijil Akademik /Academics Cerfticate

SKM

Tahap/

Level 1

SKM

Tahap/

Level 2

SKM

Tahap/

Level 3

DKM

Tahap

/Level

4

DLKM

Tahap/

Level 5

Ijazah/Degree Sarjana/Master

Jumlah

Total - 6 24 38 20 41 12

23


Kursus Diploma Teknologi telah mendapat

pengiktirafan JPA bermula tahun 2001 secara ‘khas

untuk penyandang’ dan diperbaharui setiap 2 tahun,

namun begitu pengiktirafan Jabatan Pembangunan

Kemahiran (JPK) telah diperolehi sejak 2001 sehingga

sekarang. Bagi Diploma Teknologi, kemasukan pelajar

adalah daripada lepasan institusi latihan kemahiran

awam dan swasta yang menggunapakai NOSS

(National Occupational Skills Standard) dari JPK.

Bermula tahun 2013, ADTEC Shah Alam memulakan

program Diploma Teknologi Kejuruteraan (DTK) dengan

kemasukan pelajar lepasan Sijil Pelajaran Malaysia yang

memenuhi syarat. Program DTK yang dibangun

memenuhi keperluan kod amalan akreditasi Agensi

Kelayakan Malaysia (MQA).Program pertama DTK yang

dijalankan adalah untuk bidang Pengeluaran Automotif

dengan pengambilan pertama pada sesi 1/2013 dan

diikuti dengan program yang lain.

Status Approved Training Organisation (ATO) telah

mendapat kelulusan CAAM untuk diteruskan sehingga

26 November 2019. ADTEC Shah Alam juga berjaya

meneruskan peranan sebagai pusat peperiksaan

CAAM bermula 27hb Nov 2014 untuk menjalankan

peperiksaan modul-modul bagi pihak CAAM.

Diploma in Technology courses have been

recognized by the Public Service Department since

2001 on the basis of ‘personal to holder’, and has

been renewed every two years. Apart of it,

recognition from Department of Skills Development

(DSD) has been obtained since 2001 until now. For

Diploma in Technology, students intake are from

Public/Private Training Institutions using NOSS

(National Occupational Skills Standard) from DSD.

ADTEC Shah Alam started the Diploma in

Engineering Technology programme in 2013 with the

admission of post-SPM students who fulfilled the

requirement. The Diploma programme developed

had met the requirements for the Malaysian

Qualification Agency (MQA) accreditation. The first

program conducted was Automotive Manufacturing

with the first intake in 1/2013 session, followed by

other programmes such as Welding, Mechatronics,

Electronics, Refrigeration and Air Conditioning,

Electrical Power and Manufacturing (Machining).

CAAM has endorsed the Approved Training

Organization (ATO) status to be continued till 26th

November 2019. ADTEC Shah Alam has been given

approval by the CAAM to conduct the CAAM

modules examination starting 27th November 2014.

24


PENGIKTIRAFAN PROGRAM PROGRAMME RECOGNITION

No Program/Program

Tarikh Perakuan Akreditasi

Date Of Accreditation

No. Perakuan

Akreditasi

No Of

Accreditation Mula/Start Akhir/End Status

1

Diploma Teknologi

Kejuruteraan Automasi &

Robotik

Diploma In Automation and

Robotics Engineering

Technology

1/06/2018 30/05/2021

Dalam proses

akreditasi

penuh / In

progress

MQA/PA 4232

2

Diploma Teknologi

Kejuruteraan Pengeluaran

Automotif

Diploma In Automotive

Manufacturing Engineering

Technology

28/10/2018 27/10/2021

Akreditasi

Penuh / Full

accreditation

MQA/FA 3461

3

Diploma Teknologi

Kejuruteraan Pembuatan

(Pemesinan)

Diploma In Manufacturing

(Machining)Engineering

Technology

29/06/2018 28/06/2021

Akreditasi

Penuh / Full

accreditation

MQA/FA 4562

4

Diploma Teknologi

Kejuruteraan Jaminan Kualiti

Diploma In Qualiti Assurance

Engineering Technology

29/06/2015 28/06/2018 Sementara /

Temporary MQA/PA 4561

5

Diploma Teknologi

Kejuruteraan Elektrik Kuasa

Diploma In Electrical Power

Engineering Technology

29/06/2015 28/06/2018

Dalam proses

akreditasi

penuh / In

progress

MQA/PA 4559

6

Diploma Teknologi

Kejuruteraan Penyejukbekuan

& Penyamanan Udara

Diploma In Refrigeration & Air-

conditioning Engineering

Technology

29/06/2018 28/06/2021

Akreditasi

Penuh / Full

accreditation

MQA/FA 4233

25


Pengiktirafan MQA

Recognition from MQA

No Nama Modul/ Module Name

Tarikh Perakuan/

Certification Date No. Rujukan/ Reference No.

Mula/ Start Akhir/ End

1

Penyelenggaraan Kapal

Terbang/

Aircraft Maintenance

10/8/2018 11/12/2018 ATO/2013/06

Bil Nama Kursus/ Course Name Tarikh Perakuan/

Certification Date

No. Rujukan/

Reference No.

1

Penjaga Jentera A0, A1, A4-1

dan A4 (Sepenuh dan

Separuh Masa)

Chargeman A0, A1, A4-1 and

A4 (full time and part time)

29/08/2002 PJE 05/2002

2

Penjaga Jentera A1 Sepenuh

Masa –3 tahun 6 bulan

Chargeman A1, full time - 3

years 6 months

16/2/2015 P 03/2015

Bil Standard

Tarikh Perakuan/

Certification Date No. Rujukan/

Reference No. Mula/ Start Mula/ Start

1 ISO 9001: 2008 17/08/2016 16/08/2019 QMS 01759

26


Pengiktirafan Jabatan Penerbangan Awam : Pusat Peperiksaan

Recognition from Department of Civil Aviation : Exam Centre

Pengiktirafan Suruhanjaya Tenaga

Recognition from Energy Commission

Pengiktirafan Jabatan Penerbangan Awam : Pusat Peperiksaan

Recognition from Department of Civil Aviation : Exam Centre

KE

RJA

SA

MA

IN

DU

ST

RI

DA

N K

OM

UN

IT

I

NE

TW

OR

K C

OLLA

BO

RA

TIO

N W

ITH

IN

DU

ST

RY

AN

D C

OM

MU

NIT

Y

JA

RIN

GA

N

Smart partnership

Kolaborasi industri bertujuan untuk menyediakan

peluang latihan kepada pelajar dan pensyarah

serta peningkatkan kemahiran, khidmat nasihat

teknikal dan juga guna sama aset bagi

memenuhi permintaan guna tenaga industri.

Antara industri yang terlibat dalam kerjasama

industri bersama ADTEC Shah Alam adalah seperti

berikut:

The collaboration with the industry was aimed at

providing training opportunities for students and

lecturers in improving their skills, enhancing technical

advisory services as well as using training assets to meet

the industry demand.

Among industries involved in industrial collaboration with

ADTEC Shah Alam are as follows:

28


Industry/ Agency Courses

Perodua Manufacturing Sdn Bhd

Malindo Airways Sdn Bhd

Automotive Production


AFJets Engineering Sdn Bhd

MyCopter Aviation Service Sdn Bhd

AirAsia Berhad




Mydin Mohammed Holding Bhd

Upeca Flowtech Sdn Bhd

OMRON Electronic Sdn Bhd

Toyota Assembly Services Sdn Bhd

Daikin Malaysia Sdn Bhd

Kilang Wang Bank Negara Malaysia

Electrical, Air Conditioning, Welding

Manufacturing and Quality Assurance

Automation & Robotics

Automotive Production

Air Conditioning

Quality Assurance, Manufacturing, Automation

& Robotics

Senarai Syarikat yang bekerjasama dengan ADTEC Shah Alam

List of Companies Collaboration with ADTEC Shah Alam

29


Unit CESS ADTEC Shah Alam bersama Japanese

Chamber of Trade Industry in Malaysia (JACTIM) telah

menganjurkan Pameran Kerjaya pada 13hb September

2018 di Pusat Sumber ADTEC Shah Alam. 5 syarikat SMI

Jepun telah menyertai Job Fair ini yang menawarkan

18 kekosongan jawatan seperti Juruelektrik / Juruteknik

Mekanikal / Juruteknik Jaminan Kualiti , Chargeman,

Penyelia dan Operator Mesin. Pameran Kerjaya ini telah

disertai seramai 196 orang pelajar dari ILP Pedas dan

ADTEC Shah Alam.

Industry/ Agency

UEDA PLATING (M) SDN BHD

HIRO FOOD PACKAGES

OTHA PRECISION (M) SDN BHD

E.B.S PATRONE (M) SDN BHD

NSK MICRO PRECISION (M) SDN BHD

Courses

Metal Surface Treatment

Manufacturing of Food Packaging

Manufacturing Bell Bearing

Industrial Filtration and Waste Water Treatment

Manufacturing of Precision Metal

Senarai Syarikat Jepun di bawah JACTIM yang bekerjasama dengan ADTEC Shah Alam

List of Japanese Companies under JACTIM Collaboration with ADTEC Shah Alam

CESS ADTEC Shah Alam together with Japanese

Chamber of Trade Industry in Malaysia (JACTIM) had

organized Job Fair on 13th September 2018 at ADTEC

Shah Alam Resource Centre. 5 SMI Japanese com-

panies had joined the Job Fair which offers 18 job

vacancies such as Electrical/ Mechanical/ QA

Technician, Chargeman, Supervisor and Machine

Operator. The Job Fair was attended by 196 students

from ILP Pedas and ADTEC Shah Alam.

JAWATANKUSA PENASIHAT TEKNIKAL (TAC)

Jawatankuasa Penasihat Teknikal terdiri dari

personel industri yang dilantik untuk memberi

nasihat dalam memastikan kualiti latihan yang

dijalankan di ADTEC mencapai tahap yang

d i pe r luk an o leh i ndus t r i dan j ug a

mempertingkatkan kerjasama dan hubungan dua

hala di antara ILJTM dan industri.

KEAHLIAN TAC

Bilangan Ahli Jawatankuasa Penasihat Teknikal

terdiri dari tidak kurang 5 ahli bagi setiap program

yang terdiri daripada:

Personel daripada industri

Pensyarah Institut Pengajian Tinggi Awam/

Swasta

Pegawai daripada badan-badan professional.

TECHNICAL ADVISORY COMMITTEE (TAC)

The Technical Advisory Committee consists of

industry personnel, appointed to ensure the quality of

training undertaken at ADTEC reaches the level required

by the industry as well as enhancing bilateral coopera-

tion and ties between ILJTM and the industry.

TAC MEMBERSHIP

The number of members of the Technical Advisory

Committee consists of not less than 5 members per

programme including:

Personnel from industry

Lecturer from Public / Private Higher Education

Institution

Officers from professional bodies

30


JAWATANKUASA PENASIHAT TEKNIKAL (TAC) TECHNICAL ADVISORY COMMITTEE (TAC)

BIDANG TUGAS TAC

Memberi nasihat terhadap kandungan kurikulum latihan bagi memastikan ianya relevan dengan

keperluan industri.

Menyumbang kepakaran dalam menilai, memilih dan mengesahkan soalan-soalan peperiksaan

akhir yang digubal oleh pensyarah.

Memberi maklumat terhadap perkembangan dan perubahan teknologi di industri bagi

memastikan kebolehkerjaan graduan yang dihasilkan.

Memberi nasihat di dalam usaha mendedahkan dan meningkatkan kemahiran pensyarah ILJTM

dengan kemudahan yang terdapat di industri.

Menasihati dan membantu mempertingkatkan bahan pembelajaran, alat bantuan mengajar dan

sumber rujukan yang terkini bagi menjamin proses pengajaran dan pembelajaran yang lebih

berkesan.

Menasihati dan mencadangkan penggunaan peralatan dan ‘hand tools’ yang sesuai di dalam

aktiviti latihan.

Menasihati di dalam usaha mempertingkatkan kerjasama di antara industri dan ILJTM terutama

di dalam penempatan pelajar untuk latihan industri.

Memberi nasihat terhadap pelaksanaan latihan amali supaya jurang perbezaan teknologi di

antara latihan di ILJTM dengan keperluan industri dapat dikurangkan. Memberi maklum balas

terhadap keberkesanan aktiviti latihan di ILJTM.

TAC TASKS

Providing advice on training curriculum content to ensure that it is relevant to industrial needs.

Contributing expertise in evaluating, selecting and validating final exam questions drafted by

lecturers.

Providing information on technology developments and changes in the industry to ensure the

availability of the graduates produced.

Providing advice in exposing and improving ILJTM lecturer skills with the facilities available in the

industry.

Advising and assisting to enhance the teaching materials, teaching aids and current reference

sources to ensure more effective teaching and learning process.

Advising and recommending appropriate equipment and hand tools in training activities.

Advising on enhancing collaboration between industry and ILJTM especially in student placement

for industrial training.

Providing advice on the implementation of practical training in order to reduce technological gap

between training in ILJTM with industry needs.

Providing feedback on the effectiveness of training activities at ILJTM.

31


32


SENARAI TAC MENGIKUT BIDANG BAGI TAHUN 2018 LIST OF TAC BY COURSE FOR 2018

Teknologi Jaminan Kualiti/Quality Assurance Technology

Nama/ Name Syarikat/ Company

Mohd Najib Bin Ismail LC RIMS Manufacturing Sdn Bhd

Hasnah Bt. Mohd Joned SIRIM Berhad

Herman Bin Rahmat Perfection Precision Component (M) Sdn Bhd

Ratna Sari Manirah Binti Jasni SIRIM QAS International

Teknologi Penyejukbekuan & Penyamanan Udara/

Air-conditioning & Refrigeration Technology


Mohd Fazli Yusof Bin Mohd Saleh SEMASA Services Sdn. Bhd

Saeidah Binti Ahmad HRH Resources (M) Sdn Bhd

Teknologi Elektrik Kuasa/ Electrical Power Technology


Adlan Bin Ali Universiti Teknikal Malaysia Melaka

Muhammad Redzuan Bin Umar Dewe Solutions Sdn. Bhd.

Mazlan Bin Paiman Wrzit Sdn Bhd

Ir. Dr. Iryani Mohamed Rawi TNBR Qats Sdn Bhd


Mursyidul Jum'an Bin Sabran Miyazu (M) Sdn Bhd

Muhammad Hafeiz Bin Saidin Miyazu Malaysia Sdn Bhd

Sharis Shazzali Bin Shahimi Infrastructure University

Kuala Lumpur

Hairul Izmal Bin Md Zamri Perodua Manufacturing Sdn Bhd

Teknologi Automotif/ Automotive Technology

SENARAI TAC MENGIKUT BIDANG BAGI TAHUN 2018 LIST OF TAC BY COURSE FOR 2018

Teknologi Pembuatan/Manufacturing Technology

Ahmad Azhar Bin Wagiran SAZA Technology & Services

Prof. Madya Dr. Jamaluddin Bin Mahmud Universiti Teknologi Mara

Mohd Ariff Bin Mohd Nor Automotive Industries Sdn. Bhd

Ammar Bin Mohamed Curge Advance Sdn Bhd

Stephen Chua Tuck Choy Upeca Flowtech Sdn. Bhd.

Arbaie B. Abdul Rahman Upeca Flowtech Sdn. Bhd.

33


Teknologi Komputer/Computer Technology

Nama/Name Syarikat/Company

Ir. Dr. Nasharuddin Bin Zainal Universiti Kebangsaan Malaysia

Teknologi Komputer/Computer Technology


Azuddin Bin Mamat University Malaya

Mohd Zamri Bin Hassan Symphony Manufacturing & Services

Mohd Amiruddin Bin Idris Petroliam Nasional Berhad (Petronas)

Mohd. Zaffri Bin Arohad Nusantara Technologies Sdn. Bhd.

Teknologi Penyelenggaraan Kapal Terbang/ Aircraft Maintenance Technology


Lt. Kol. Prof. Madya Mohamed Tarmizi Bin

Ahmad Universiti Pertahanan Nasional Malaysia

Shaharil Annuar Mohamad Saman Mycopter Aviation Services Sdn Bhd

Muhammad Azmir Bin Mokhtar Raya Airways Sdn Bhd

Sudriman Bin Hassan Sepang Aircraft Engineering Sdn Bhd

Che Kamarulzaman Bin Che A. Razak Bhic Aeroservices Sdn Bhd, Helicopter Centre

Lawatan promosi diteruskan sepanjang 2018

bertujuan untuk menjalin kerjasama yang erat antara

pihak institut dengan industri serta komuniti. Melalui

lawatan ini, pelbagai peluang kerjasama dapat di

bentuk seperti kerjasama dalam menyediakan latihan

serta menjalankan program-program peningkatan

kemahiran, khidmat nasihat teknikal dan juga

pembangunan kerjaya pelajar bagi memenuhi

permintaan tenaga mahir industri.

LAWATAN INDUSTRI INDUSTRIAL VISIT

Industrial visits continued throughout 2018 with aim

to establish collaboration between the institute,

industry and the community. Through these visits,

various collaboration opportunities can be in the

form of cooperation in providing training as well as

conducting skills upgrading, technical advisory and

student career development programmes to meet

the demand for skill workers.

Lawatan Pihak Pengurusan ke Syarikat untuk Menjalankan Jalinan Kerjasama 2018

Industrial Visits to Companies for Collaboration 2018

Date: 05.03.2018

Location : Dream EDGE R&D.

Date: 14.03.2018

Location : Perodua Sdn. Bhd.

Date: 28.03.2018

Location : Proton Sdn. Bhd.

Date: 17.04.2018

Location : F & N Diaries

Date: 11.04.2018

Location : Swift Energy Sdn. Bhd.

Date: 24.04.2018

Location : Kapar Energy Ventures

Date: 06.04..2018

Location : UPECA Flowtech.

Date: 23.02.2018

Location : Azbil Malaysia Sdn. Bhd.

Date: 16.05.2018

Location : Acson Malaysia Sdn. Bhd.

Date: 03.05.2018

Location :MIMOS Semiconductor

Date: 18.07.2018

Location : Prihoda KLCC

Date: 19.07.2018

Location : Iwatani (Mr. Hiro)

Date: 22.06.2018

Location : Daifuku (M) Sdn Bhd

Date: 25.09.2018

Location : Jabatan Alam Sekitar

Date: 27.09.2018

Location : TXMR Sdn. Bhd.

Date: 08.10.2018

Location : ABB Malaysia Sdn. Bhd.

1

2

3

4

5

9

10

11

12

13

14 6

7 15

8 16

34


Lawatan Pihak Industri/ Komuniti dan Sekolah ke ADTEC Shah Alam 2018

Industry/Community Partners and Schools Visit to ADTEC Shah Alam 2018

Date: 16.01.2018

Location : Mydin Mohamed Holdings Berhad

Date: 17.01.2018

Location : Felo from Teach For Malaysia

Date: 21.02.2018

Location : Aero Base Coaching Sdn Bhd

Date: 01.03.2018

Location : Austrade

Date: 01.03.2018

Location : Perodua Sdn. Bhd

Date: 12.03.2018

Location: Institut Latihan Perindustrian

Bukit Katil

Date: 16.03..2018

Location: Kolej Vokasional Klang

Date: 05.06.2018

Location : Bahagian Pengurusan Sumber

Manusia, Kerajaan Negeri Selangor

Date: 05.07.2018

Location : DRB-Hicom University

Date: 06.07.2018

Location :Strand Aerospace Malaysia Sdn Bhd

Date: 10.07.2018

Location : PMT Industries

Date: 13.07.2018

Location : Panasonic Malaysia Sdn Bhd

Date: 16.07.2018

Location : Mitsubishi Motors Sdn Bhd

Date: 02.08.208

Location: Infrastructure University

Kuala Lumpur (IUKL)

Date: 14.08.2018

Location : Unifield International College

Date: 04.09.2018

Location: Kossan Latex Industries (M) Sdn. Bhd

Date: 10.10.2018

Location : Delegasi Ukraine

Date: 11.10.2018

Location : Infineon (Melaka)

35


1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

Program Khidmat Masyarakat (CSR) di Masjid Al-Bakri Bukit Naga, Seksyen 32 Shah

Program Program Khidmat Masyarakat (CSR) di Surau Al-Ikhlas Sijangkang, telah

AKTIVITI KHIDMAT MASYARAKAT 2018 COMMUNITY SERVICES ACTIVITY 2018

Sepanjang 2018, terdapat dua aktiviti Khidmat

Masyarakat (CSR) yang telah dijalankan iaitu di Masjid

Al-Bakri Bukit Naga dan Surau al-Ikhlas Sijangkang.

Aktiviti yang dijalankan melibatkan perbersihan

kawasan masjid, ruang solat, longkang dan tandas.

Khidmat Komuniti ini dirancang dan dilaksanakan agar

dapat membina semangat kerjasama dikalangan

pelajar selain dapat mengenal pihak pengurusan masjid

dengan lebih erat. Ini bertujuan agar terbinanya satu

jalinan di antara komuniti masjid dengan pihak Institut

dalam menterjemahkan misi Institut yang bukan sahaja

ingin melahirkan pelajar yang cemerlang dari sudut

kemahiran fizikal, bahkan cemerlang dari sudut

sosiobudaya dengan masyarakat setempat. Selain itu

juga, jalinan ini akan menghasilkan satu kerjasama dua

pihak pada masa-masa akan datang.

36


Throughout 2018, there were two Community Ser-

vices Responsibility (CSR) activities that were

conducted at Al-Bakri Mosque in Bukit Naga and

Surau Al-Ikhlas in Sijangkang. The activity involved

are cleaning of the mosque area, prayer hall, drains

and toilets. This community service was planned and

implemented in order to instill the spirit of

cooperation among students as well as to develop

rapport the management of the mosque more

closely. It is inline with the mission of institute which

not only to produce excellent students in physical

skills, but also excellent from the socio-cultural to the

local community. In addition, this partnership will

benefit for both parties in the future.

PE

NC

APA

IA

N D

AN

KE

JA

YA

AN

AC

HIE

VE

ME

NT

AN

D S

UC

CE

SS

Competition Date Venue Achievement Course Participant

Pra Kelayakan

WORLDSKILLS

MALAYSIA-BELIA

(WSMB) 2018

19 hingga 21

April 2018

UniKL MFI, Bandar

BaruBangi,

Selangor

Sijil Penyertaan Refrigeration &

Air Conditioning

Muhammad Farid Bin

Majid

Muhamad Arif Bin

Ahmad

28

September

2018 ~ 2

Oktober

2018

CIAST, Selangor Sijil

Kecemerlangan Mechatronics

Muhammad Harriz

Syaifful Bin Rozaimy

Mohamad Ku Badri Irfan

Bin Ahmad Rudy

18~19 April

2018

UNIKL MFI, Bangi,

Selangor Sijil Penyertaan

Mechanical

Engineering

Design CAD

Maria Mahyon Bt

Mokhtar

Robot Sempena

TVET Malaysia

2018

22 hingga 23

Mac 2018

Pusat Dagangan

Dunia Putra

(PWTC), Kuala

Lumpur

Sijil Penyertaan

Automasi &

Robotik

Arash Bin Mohammad

Hanif

Nurul Natasha Nazwa

Binti Khamis

Megat Ishaq Arif Bin

Baharum

Mohd Nur Syafiq Bin

Mohd Daroini

Muhammad Sufi Bin

Azmin

Muhammad Zakwan Bin

Musa

Muhammad Harriz

Syaifful Bin Rozaimy

Mohamad Ku Badri Irfan

Bin Ahmad Rudy

Muhammad Luqmanul

Hakim Bin Shahipudin

Combat Robot

Challenge 2018

12 ~ 15 April

2018

Perkarangan

Stadium Darul

Makmur, Kuantan,

Pahang

Sijil Penyertaan Automasi &

Robotik

Mohd Nur Syafiq Bin

Mohd Daroini

Muhammad Sufi Bin

Azmin

Muhammad Zakwan Bin

Musa

Anugerah

Inovasi

Kementerian

Sumber Manusia

Tahun 2018

UITM Shah Alam Sijil Penyertaan

Noise Detector

Device At

Aircraft Training

Organisation

Hangar (NICE)

Norsiah Binti Sukardy

Sepanjang 2018, pelbagai pertandingan dan program

inovasi telah disertai oleh pensyarah dan pelajar ADTEC

Shah Alam.

Throughout 2018, various competitions and

innovations programme were participated by ADTEC

Shah Alam lecturers and students.

PENGHARGAAN KEPADA KAKITANGAN STAFF APPRECIATION

39


Senarai Penerima APC

List of APC receivers

Anugerah Perkhidmatan Cemerlang (APC) adalah

merupakan pengiktiran yang diberikan kepada

pegawai yang menunjukkan prestasi yang baik

sepanjang tahun berkenaan. Penerima APC tahun

2018 adalah:

The Excellent Service Award is an award

given to officers who performed well throughout

the year. APC receivers in 2018 were:

NO NAME GRADE

1 ROSNOIZAM BINTI ABD MAJID PLV/DV52

2 SUHANA BINTI ROZLAN PLV/DV44

3 HASFANORBITAHAYATI BINTI IBRAHIM STAR PLV/DV44

4 AZHARI BIN HAJI SALLEH PLV/DV44

5 NABILAH BINTI MOHAMED PLV/DV44(M)

6 NORSIAH BINTI SUKARDY PPLV/DV38

7 MARIA MAHYON BINTI MOKHTAR PPLV/DV36

8 SHAFRIZAL BIN SHAFIE PPLV/DV36

9 NORHAIDA BINTI MOHAMAD SANI PPLV/DV36

10 KHAIRUL HALMI BIN HASSAN BASRI PEMB. KESATRIA/S19

HA

L E

HW

AL P

ELA

JA

R

ST

UD

EN

T A

FFA

IRS

41


ANUGERAH PELAJAR STUDENTS AWARD

No Course Name

1 Diploma Teknologi Elektrik Kuasa

Diploma In Electrical Power Technology

Mohamad Saiful Azrine Bin Saifol

Naziri

2 Diploma Teknologi Kejuruteraan Elektrik Kuasa

Diploma In Electrical Power Engineering Technology Mohamad Hakim Bin Mohd Rozani

3 Diploma Teknologi Pembuatan (Pemesinan)

Diploma In Manufacturing (Machining)Technology

Muhammad Shahmi Aiman Bin

Mohamad Shah

4 Diploma Teknologi Kejuruteraan Pembuatan (Pemesinan)

Diploma In Manufacturing (Machining)Engineering Technology Alia Marini Binti Abdul Khalid

5 Diploma Teknologi Jaminan Kualiti

Diploma In Quality Assurance Technology Siti Raudhah Binti Aziz Jaafar

6 Diploma Teknologi Kejuruteraan Jaminan Kualiti

Diploma In Quality Assurance Engineering Technology Muhammad Hanif Bin Sa'at

7 Diploma Teknologi Kejuruteraan Pengeluaran Automotif

Diploma In Automotive Production Engineering Technology Muhamad Faris Bin Che Mat

8 Diploma Teknologi Kejuruteraan Automasi Dan Robotik

Diploma In Automation And Robotics Engineering Technology Muhammad Sufi Bin Azmin

9 Diploma Teknologi Kejuruteraan Penyelenggaraan Kapal Terbang

Diploma In Aircraft Maintenance Engineering Technology Ranisha A/P Murelidaran

10 Diploma Teknologi Penyejukbekuan Dan Penyamanan Udara

Diploma In Refrigeration And Air-conditioning Technology Muhammad Afiq Bin Zuhairi

11

Diploma Teknologi Kejuruteraan Penyejukbekuan Dan

Penyamanan Udara

Diploma In Refrigeration And Air-conditioning Engineering

Technology

Mohammad Asrafaizul Bin Aziz

Anugerah pelajar diberikan kepada para pelajar yang

menunjukkan peningkatan prestasi dalam latihan. Tujuan

anugerah adalah sebagai motivasi dan meningkatkan

pencapaian pelajar dalam latihan dan pada masa

sama meningkatkan persaingan individu.

Student award is an award given to student who

perform well in their training. The goal of the award is

to motivate and improve student’s achievement in

training and at the same time to increase individual

competitiveness among the students.

Senarai Penerima Anugerah Peningkatan Prestasi Pelajar Sesi 1/2018

List of Students Performance Improvement Award for 1/2018 Session

No Course Name

1 Diploma Teknologi Elektrik Kuasa

Diploma in Electrical Power Tecnology Mohamad Radidin Bin Jamaluddin

2

Diploma Teknologi Kejuruteraan Penyejukbekuan &

Penyamanan Udara

Diploma iIn Refrigeration And Airconditioning Engineering

Technology

Kamarul Aideed Bin Nor Adzimi

3

Diploma Teknologi Kejuruteraan Automasi & Robotik

Diploma in Automations And Robotics Engineering

Technology

Nur Azimah Binti Abd Aziz

4

Diploma Teknologi Kejuruteraan Penyelenggaraan Kapal

Terbang

Diploma in Arcraft Maintenance Engineering Technology

Muhammad Hanif Asyraf Bin Mazlisham

5 Diploma Teknologi Pembuatan (Pemesinan)

Diploma in Manufacturing Tecnology Mohammad Nur Hapizan

6 Diploma Teknologi Kejuruteraan Pembuatan (Pemesinan)

Diploma in Manufacturing Engineering Technology Ikmal Fakhrullah Bin Jamil

7 Diploma Teknologi Kejuruteraan Pengeluaran Automotif

Diploma in Automotive Production Engineering Technology Ahmad Syahmi Bin Abdullah

8 Diploma Teknologi Jaminan Kualiti

Diploma In Quality Assurance Technology Sitti Ina Binti Abdul Mohtalib

9 Diploma Teknologi Kejuruteraan Jaminan Kualiti

Diploma in Quality Assurance Engineering Technology Muhammad Hanif Bin Sa'at

Senarai Penerima Anugerah Peningkatan Prestasi Pelajar Sesi 2/2018

List of Students Performance Improvement Award for 2/2018 Session

42


KEBOLEHKERJAAN GRADUAN GRADUATE EMPLOYABILITY

Research conducted after 6 months of graduation

and 6 months after convocation were aimed to

update graduates' job status information, such as

employment, identifying job market demands and

to ensure ADTEC Shah Alam graduates have a job

suit to the field of study and earn an appropriate

salary. The survey was conducted during the ILJTM

Convocation Ceremony that was held on 30th and

31st July 2018 with a total number of 407graduates.

This statistic was based on the data obtained

through the Student Competency Survey System

(eTOS).

Kajiselidik yang dilaksanakan selepas 6 bulan

menamatkan pengajian dan 6 bulan selepas

konvokesyen bertujuan untuk mengemaskini maklumat

status pekerjaan graduan seperti maklumat pekerjaan,

mengenalpasti permintaan pasaran pekerjaan dan

memastikan graduan ADTEC Shah Alam memperolehi

pekerjaan yang menepati bidang yang dipelajari dan

gaji yang bersesuaian.

Kajiselidik dilakukan semasa Majlis Konvokesyen ILJTM

yang diadakan pada 30 dan 31 Julai 2018 dengan

jumlah graduan adalah 407 orang. Statistik ini dibina

berdasarkan data yang diperolehi melalui Sistem Kaji

Selidik Kebolehpekerjaan Pelajar (eTOS) yang diisi oleh

para pelajar secara atas talian.

No

Sesi Keluaran/

Graduation

Session

Maklumbalas dari responden

Feedback from respondents

Peratus yang bekerja dalam

tempoh 6 bulan selepas

tamat belajar/

Percentage working within 6

months after graduation

1.

1/2018

(240 graduates)

213

(89%)

173

(81.2%)

2.

2/2018

( 167 graduates )

149

(100%)

119

(80.0%)

43


Bagi kedua-dua keluaran, didapati majoriti graduan

86.8% telah bekerja dan sambung belajar dalam

tempoh 6 bulan setelah bergraduasi. Bagi sesi 1/2018,

sejumlah 92.4% graduan telah bekerja dan

menyambung pengajian manakala bagi sesi 2/2018,

pencapaian sejumlah 81.2%

For both outputs, the majority of graduates 86.8%

have worked and further their studies within 6 months

after graduation. For the 1/2018 session, 92.4% of

graduates have worked and continued their studies

while for the 2/2018 session, the achievement was

81.2%

Total No of Respondent for 1/2018 Session

Graduates status No %

A. Employed/ Offered For a Job 18 69.5

B. Further Study 48 22.5

C. Unemployed 17 8

Employability (A+B) 92.0

44


Total No of Respondent for 2/2018 Session

Graduates status No %

A. Employed/ Offered For a Job 103 64.8

B. Further Study 30 18.9

C. Unemployed 26 16.4

Employability 83.7

ALUMNI ALUMNI

Alumni ADTEC Shah Alam ini dibangunkan

bertujuan untuk mengeratkan silaturahim antara

bekas pelajar ADTEC Shah Alam, berkongsi maklumat,

pendidikan, kerjaya dan pengalaman. ALUMNI

ADTECSA merupakan pertubuhan berdaftar di

bawah Pendaftaran Pertubuhan (ROS) dengan no.

rujukan PPM-018-10-25072014. Setakat Disember

2018 jumlah keseluruhan ahli ALUMNI telah mencecah

4,650 ahli. Justeru, adalah diharapkan pertubuhan ini

mampu menjadi pemangkin kepada perubahan

yang berterusan khususnya untuk pelajar sedia ada di

institut. Mesyuarat Agong kali ke-2 telah diadakan

pada 21 April 2018 di Hotel De Palma, Shah Alam.

Members 4,650

Honorary Members 136

Associate Members 557

Facebook Alumni ADTEC Shah Alam

Activity ‘GET Together’ ALUMNI ADTECSA Programme on 21st April 2018 at

Hotel De Palma, Shah Alam.

Alumni ADTECSA is a registered organization under

the Registrar of Societies (ROS) with no. PPM-018-10-

25072014 reference. The Alumni is aimed at

fostering friendship between former ADTEC Shah

Alam students through sharing of information on

education, careers and experiences. As of

December 2018 the total number of ALUMNI mem-

bers has reached 4,650 members. Hence, it is

hoped that this establishment will be a catalyst for

continuous change especially for existing students

at the institute. Second Meeting was held on 21st

April 2018 at De Palma Hotel, Shah Alam .

45


COMMITTEES MEMBERS

Mr. Muhammad

Muzzammil Bin

Hasanar Kunju

Ms. Shakila Binti Mohd

Noor

Mr. Mohd Haziq Bin

Kaswadi

Mdm. Noorziha Binti

Mohd Kasirun Mdm. Akhzailiza Binti

Md Akhir

Mdm. Siti Aminah

Binti Abd Razak

Ms. Norhatikah Binti

Husin

Mrs. Farhana Binti

Abd Rahman

Ms. Aishah Binti Jenly Mr. Muhammad Arif

Fikri Bin Nor Sofian

President

Dep.

President Secretary

Asst.

Secretary Treasury Auditor

Committees

46

Annu-

Committees

Committees Committees

UNIT BIMBINGAN & KAUNSELING COUNSELING & CONSULTATION UNIT

Khidmat bimbingan dan sesi rundingcara

dikendalikan oleh seorang Pegawai Psikologi.

Program & aktiviti yang dijalankan sepanjang

tahun 2017 hingga Mei 2018:

1. Program Bimbingan Kerjaya (Bimbingan

secara kelompok untuk pembangunan diri

dan kerjaya seperti penulisan resume, portfolio

kerjaya, komunikasi, tips temuduga dan etika

berpakaian);

2. Menjalankan sesi bimbingan kaunseling secara

individu dan kelompok sebanyak 47 kes (12

kakitangan & 35 pelajar) yang meliputi

pelbagai jenis isu;

3. Menjalankan program pembangunan &

intervensi seperti Ceramah Motivasi, Latihan

Dalam Kumpulan (MSK 1/2018 & MSK 2/2018),

Program Team Dinamik 3.0, Kem Kepimpinan

MPP(2018);

4. Ceramah Kerjaya oleh pihak MSU pada

2/11/2018 untuk pelajar semester akhir;

5. Menjalankan pelbagai jenis Ujian Personaliti

seperti Kerjaya (SDS) & Ujian Personaliti

WarnaAktiviti bimbingan Pembangunan

Karakter melalui kaedah Psiko-Numerologi.

Counseling and consultation sessions were

conducted by a Counselor Psychologist. Pro-

grams & activities were conducted

throughout the year 2018 were:

1. Career Guidance Program (Group guidance

for self development and career such as

resume wri t ing, career port fol io,

communication, interview tips and ethics

dress);

2. Conducting individual and group counseling

sessions for 47 cases (12 staff & 35 students)

covering various types of issues;

3. Conducting development & intervention

programs such as Motivational Talk, Group

Training (MSK 1/2018 & MSK 2/2018), Dynamic

Team Program 3.0, MPP Leadership Camp

(2018);

4. Organizes career Talk by MSU on 2nd Novem-

ber 2018 for final year students;

5. Carrying out various types of Personality

Test such as Career (SDS) & Personality Test

Characteristics of Character Development

guidance through Psycho-Numerology.

47


AKTIVITI KEM TAHUNAN UNIT BERUNIFORM

DAN UNIT KAUNSELING ADTEC SA

KO-KURIKULUM CO-CURRICULUM

Program Team Dinamik Unit Kokurikulum telah

diadakan pada 26 OKtober hingga 28 Oktober 2018 di

Asia Camp, Kuala Kubu Baru, Selangor dengan

penglibatan 80 orang pelajar daripada semua badan

unit beruniform. Program ini telah diadakan selama 3

hari 2 malam bertujuan memberi persediaan kepada

pelajar yang dilantik sebagai jawatankuasa bagi setiap

unit kokurikulum. Program ini juga adalah

memfokuskan kepada etika dan kemahiran

kepimpinan yang meliputi komunikasi berkesan,

kemahiran membuat keputusan dan keyakinan diri.

Melalui program ini juga, Unit Kaunseling memainkan

peranan untuk menyuntik semangat jatidiri yang lebih

kukuh di kalangan pelajar manakala Unit Disipilin &

Kokurikulum memastikan peraturan kem serta sahsiah

diri dijaga.

Team Dynamic Programme under Co-curriculum

Unit was held from 26th - 28th October 2018 at the

Asia Camp, Kuala Kubu Baru, Selangor with the

involvement of 80 students from all uniformed

bodies. The program was held for 3 days and 2

nights with aim to prepare the students who was

appointed as committees for each co-curriculum

unit. The programme also focused on ethics and

leadership skills including the effectiveness of

communication, decision-making skills and

self-confidence. Through this programme, The

Counseling Unit plays a role in instilling a stronger

sense of identity among students while the

Disciplinary & Co-curricular Unit ensures that the

camp rules and the personality were maintained.

48


Sepanjang tahun 2018 ADTEC Shah Alam telah diberi

peruntukan sebanyak RM14,494,547.13 dan

perbelanjaan keseluruhan adalah RM14,261,843.32.

Pecahan perbelanjaan mengikut kategori seperti

berikut :

Throughout the year 2018, ADTEC Shah Alam was

given an allocation of RM14,494,547.13 and the

overall expenditure was RM14,261,843.32.

Breakdown of expenditure by category are as

follows:

No Perkara/Title Jumlah/Total

1 Emolumen

Emoluments RM 9,568,558.02

2 Bekalan dan Perkhidmatan

Supplies and Services RM 4,668,785.30

3 Lain-lain Perbelanjaan

Others expenditures RM 24,500.00

TOTAL RM 14,261,843.32

Perbelanjaan ADTEC Shah Alam 2018

Expenditures of ADTEC Shah Alam 2018

50


GRAPH

TERIMAAN BAYARAN PAYMENTS RECEIVED

No Perkara/Title Jumlah/Total

1 Bayaran-bayaran lain

Other Payment RM 5,969.00

2 Bayaran balik Tahun Lalu

Past Years Payment RM 665,023.45

3 Bayaran pelajaran yang lain

Other Educational Payment RM 1,734,871.50

4 Jualan-jualan Lain

Others Sales RM 102,350.75

5 SewaanAsrama

Accommodation Rentals RM 167,760.00

6 Sewaan Bangunan Lain

Other Building Rentals RM 17,050.00

TOTAL RM 2,693,024.70

Perbelanjaan ADTEC Shah Alam 2018

Expenditures of ADTEC Shah Alam 2018

51


GRAPH

PENGURUSAN AKUAN AMANAH TRUST ACCOUNT MANAGEMENT

Akaun Amanah adalah kutipan kewangan dari kursus

jangka pendek yang dijalankan. Akaun ini boleh

dibelanjakan untuk latihan, penyelenggaraan dan

infrastruktur seperti perolehan bahan guna habis,

peralatan latihan dan program pembangunan

pegawai dan pelajar.

The Trust Account is a financial fund collected from

courses conducted on short term basis and from

other related collections. This account can be spent

on training, maintenance and infrastructure such as

purchases of consumables, training equipment and

development programs for officers and students.

Perkara/Title Jumlah/Total (RM)

Terimaan /Received RM 728,191.90

Perbelanjaan /Expenditure RM 338,903.55

Jumlah perbezaan /Total difference RM 389,288.35

Senarai Kutipan Kewangan ADTEC Shah Alam

List of Financial Fund ADTEC Shah Alam 2018

52


GRAPH

KE

MU

DA

HA

N LA

TIH

AN

TR

AIN

ING

FA

CIL

ITIE

S

ASRAMA

Pelajar diberi kemudahan asrama dengan kadar

bayaran RM308/semester. Kapasiti Asrama ADTEC Shah

Alam adalah sebanyak 920 orang.

DEWAN MAKAN DAN KAFETARIA

Pelajar disediakan makanan di dewan makan secara

percuma sebanyak 4 kali sehari. Penyedia dewan

makan di kontrakkan kepada pembekal setiap dua (2)

tahun. Selain itu, bagi kemudahan pelawat, kakitangan

dan pelajar, kemudahan kafeteria turut membekalkan

makanan harian.

PUSAT SUMBER

Pusat Sumber dilengkapi bahan bacaan yang terdiri

dari buku-buku ilmiah seperti buku-buku teknikal dan

bukan teknikal, jurnal, majalah dan laporan projek akhir

pelajar. ADTEC Shah Alam menggunakan Training

Management System (TMS) untuk menguruskan aktiviti

peminjaman dan pemulangan bahan rujukan. Carian

buku di Pusat Sumber boleh dibuat secara atas talian

melalui Web OPAC bagi memudahkan pengguna.

Sehingga kini, terdapat sejumlah 7169 bahan bacaan

berdaftar di Pusat Sumber ADTEC Shah Alam termasuk

buku sumbangan, hadiah dan buku Laporan Projek

Tahun Akhir (PTA) pelajar.

HOSTEL

Students are allocated accommodation facilities at a

rate of RM308 / semester. The capacity of ADTEC Shah

Alam Hostel is 920 beds.

DINING HALL AND CAFATERIA

Students are provided with meals at the dining hall

free 4 times a day. The dining hall is contracted to

supplier every two (2) years. In addition, for the

convenience of visitors, staff and students, a cafeteria

is also provided for daily meals.

RESOURCE CENTER

The Resource Center is equipped with reading

materials consisting of scientific books such as

technical and non-technical books, journals,

magazines and Final students' Project Report . ADTEC

Shah Alam uses the Training Management System

(TMS) software to manage lending and returning o f

lent materials. Book search at Resource Center can be

made online through the Web OPAC System for con-

venience. To date, there are a total of 7169

registered reading materials at the ADTEC Shah Alam

Resource Center including donated books, Final

students' Project Report (PTA).

ANTARA KEMUDAHAN YANG TERDAPAT

DI ADTECSA

54


Sesi/Session 1/2018

Bil. Pelajar yang mendaftar

Total of students registered 128 orang/students

Bil. Pelajar yang memohon PTPK

Total of students applied 93 orang/students

Sesi/Session 2/2018

Bil. Pelajar yang mendaftar

Total of students registered 1341 orang/students

Bil. Pelajar yang memohon PTPK

Total of students applied PTPK 100 orang/students

Bil. Jenis Yuran/Type of Fees Jumlah Bayaran /Fees (RM)

1 Yuran Pengajian

Tution Fee 1500/semester

2 Makan dan Minum

Food and Beverage Percuma/Free

3 Elaun Sara Hidup (ESH)

Pocket Money 400/bulan/month

4 Penginapan

Accomodation 308/semester

5 Latihan di Industri

Industrial Trainning

13000 (untuk Pelajar Dip. Teknologi Kejuruteraan

Penyelenggaraan Kapal Terbang sahaja)

13000 (for Aircraft Maintenance Engineering

Technology Engineers students only)

KEMUDAHAN PINJAMAN PERBADANAN TABUNG PEMBANGUNAN KEMAHIRAN (PTPK) SKILL DEVELOPMENT FUND COPORATION FACILITY (PTPK)

Semua pelajar yang melanjutkan pengajian ke ADTEC

Shah Alam layak memohon pinjaman PTPK dan

diuruskan oleh Bahagian Hal-Ehwal Pelajar. Pinjaman

ini melibatkan yuran pengajian, sara hidup, bayaran

penginapan dan Latihan Industri untuk pelajar AMT.

All students studying at ADTEC Shah Alam are eligible

to apply for a PTPK loan and are managed by the

Student Affairs Division. These loans involve tuition

fees, subsistence, lodging fees and Industrial Training

for AMT students.

55


* Fees are subject to change without prior notice

56


QUALITY ASSURANCE PROGRAM

NO CODE COURSE TITLE DURATIONS

(DAYS) FEES (RM)

1 QA01 BASIC METROLOGY - 1D MEASUREMENT 3 520.00

2 QA02 7 QC TOOLS 3 400.00

3 QA03 ADVANCED METROLOGY - 3D MEASUREMENT 4 1000.00

4 QA04 BASIC PRODUCTION INSPECTION 3 400.00

5 QA05 LEAN SIX SIGMA 3 450.00

MANUFACTURING PROGRAM


(DAYS) FEES (RM)

1 MC01 CNC MILLING OPERATION 3 2800.00

2 MC02 CNC TURNING OPERATION 4 3000.00

3 MC03(A) CNC ELECTRO DISCHARGE MACHINING (EDM) SINKER 4 1650.00

4 MC03(B) CNC ELECTRO DISCHARGE MACHINING (EDM) WIRE CUT

MACHINE 4 1650.00

5 MC04 FLEXIBLE MANUFACTURING SYSTEM (FMS) 5 2610.00

6 MC05 CNC GRINDING OPERATION 4 2360.00

7 MC06 TURNING OPERATION 3 1550.00

8 MC07 MILLING OPERATION 3 1550.00

9 MC08 GRINDING OPERATION 3 1550.00

AUTOMOTIVE PRODUCTION PROGRAM


(DAYS) FEES (RM)

1 AP01 INSPECTION METHOD AND DEFECT FINDINGS ANALYSIS IN

AUTOMOTIVE PRODUCTION 3 1290.00

2 AP02 INSPECTION USING MEASURING EQUIPMENT IN AUTOMOTIVE

PRODUCTION 3 1280.00

3 AP03 VEHICLE QUALITY ASSURANCE 3 1290.00

4 AP04 QUALITY CONTROL TOOLS IN AUTOMOTIVE PRODUCTION 3 880.00

5 AP05 INTRODUCTION TO BASIC AUTOMOBILE (CAR) FUNCTION 3 380.00

SENARAI KURSUS JANGKA PENDEK (MODULAR) LIST OF PART TIME COURSES (MODULAR)

57

Annual

WELDING PROGRAM


(DAYS) FEES (RM)

1 WT01 6G-SMAW - CARBON STEEL PIPE (LICENSED) 5 2660.00

2 WT02 6G-GTAW - CARBON STEEL PIPE (LICENSED) 5 3260.00

3 WT03 GMAW/MIG WELDING ON CARBON STEEL PLATE 3 1400.00

4 WT04 GMAW/MIG WELDING ON ALUMINIUM PLATE 3 1400.00

5 WT05 GTAW/TIG WELDING ON STAINLESS STEEL PLATE 3 1560.00

6 WT06 GTAW/TIG WELDING ON ALUMINIUM PLATE 3 1570.00

7 WT07 FCAW ON CARBON STEEL PLATE 3 1410.00

8 WT08 SUBMERGED ARC WELDING PROCESS 2 860.00

9 WT09 PLASTIC WELDING PROCESS 2 860.00

10 ND01 VISUAL INSPECTION ON WELDED JOINT 2 1080.00

11 ND02 DYE PENETRANT INSPECTION 2 1120.00

12 ND03 MAGNETIC PARTICLE INSPECTION 2 1210.00

AIRCRAFT MAINTENANCE PROGRAM


(DAYS) FEES (RM)

1 AMT01 HUMAN FACTOR IN AVIATION 3 550.00

2 AMT04 AIRCRAFT SHEET METAL REPAIR 4 1180.00

3 AMT05 AIRCRAFT WIRING AND LOOMING 3 890.00

4 AMT06

AIRCRAFT MAINTENANCE LICENCE CAT . A1 (THEORY)

COMPLETE WITH DCAM PART 66 MODULE

EXAMINATIONS

58 5880.00

5 AMT07 SAFETY MANAGEMENT SYSTEM (SMS) 2 390.00

6 AMT08 HUMAN FACTOR CONTINUOUS TRAINING (HFCT) 2 390.00

7 AMT09 FUEL TANK SAFETY (FTS) 2 390.00

8 AMT10 ELECTRICAL WIRING INTERCONNECTION SYSTEM (EWIS) 2 390.00

9 AMT11(A) AIRCRAFT MAINTENANCE LICENCE CAT. A1 TASK

ASSESSMENT 64 TASK 1920.00



58


ELECTRICAL (POWER) PROGRAMME


(DAYS) FEES (RM)

1 EP01 ELECTRICAL CHARGEMAN A0 - (ST CERTIFICATE) 62 3820.00

2 EP02 ELECTRICAL CHARGEMAN A4 - (ST CERTIFICATE) 78 4690.00

3 EP03 LOW VOLTAGE OVERHEAD LINE - (ST REQUIREMENT) 10 1550.00

4 EP04 LOW VOLTAGE GENERATOR & SYNCHRONISING -

(ST REQUIREMENT) 10 1550.00

5 EP05 INSTALL AND MAINTENANCE OF CAPASITOR BANK 3 600.00

6 EP06 INSTALLATION AND MAINTENANCE OF UNINTERRUPTABLE

POWER SUPPLY SYSTEM (INVERTER) 3 600.00

7 EP07 OPERATE THREE PHASE MAIN SWITCHBOARD 2 580.00

8 EP09 TROUBLESHOOTING ELECTRIC MOTOR 2 510.00

9 EP10 TRANSFORMER INSTALLATION, MAINTENANCE AND

TESTING 3 590.00

10 EP11 FIRE ALARM MAINTENANCE 2 590.00

11 EP12 AUTOMATIC VOLTAGE CONTROL (AVR) APPLICATION 2 510.00

12 EP13 PROTECTION SYSTEM 2 580.00

13 EP14 AIR CIRCUIT BREAKER (ACB) - MAINTENANCE AND

TESTING 3 590.00

14 EP15 VACUUM CIRCUIT BREAKER (VCB) - MAINTENANCE AND

TESTING 3 590.00

15 EP16 HIGH VOLTAGE SAFETY AWARENESS AND PROCEDURE

(ACT AND REGULATION) 2 600.00

16 EP17 DIY BASIC HOME WIRING 2 320.00

17 EP18 DIY HOME SOLAR PANEL APPLICATION 2 320.00

18 EC01 SERVO MOTOR CONTROL 3 660.00

19 EC03 INVERTER CONTROL INDUCTION MOTOR 2 660.00

20 EC08 BASIC ELECTRICAL 2 300.00

59


REFRIGERATION AND AIR-CONDITIONING PROGRAM


(DAYS) FEES (RM)

1 RA01 DUCTING SYSTEM DESIGN AND BALANCING 3 690.00

2 RA02 CHILLER EFFICIENCY TESTING AND MAINTENANCE 3 740.00

3 RA03 SINGLE COLD ROOM TROUBLESHOOTING, TESTING AND MAINTENANCE

3 850.00

4 RA04 COMMERCIAL AIR CONDITIONER WIRING AND TESTING

3 800.00

5 RA05 INVERTER AIR CONDITIONER INSTALLATION AND TESTING

2 540.00

6 RA06

CERTIFICATION FOR SERVICE TECHNICIAN PRO-GRAMME (CSTP) OF REFRIGERATION AND AIR CON-DITIONING SECTOR (RACs) - ACCORDING TO DE-

PARTMENT OF ENVIRONMENT ACT

3 530.00

7 RA07 DIY HOME AIR CONDITIONER SERVICING 1 120.00

8 RA08 DIY CAR AIR COND SERVICING 2 300.00

PEMBIAYAAN YURAN KURSUS

Bayaran kursus boleh dibuat tuntutan dengan

Human Resource Development Fund (HRDF).

* Nota

Kursus Customised bergantung atas per-

mintaan dari pihak industri / kumpulan.

ADTEC Shah Alam berhak membatalkan atau

mengubah jadual program tersebut.

Untuk maklumat lanjut, sila hubungi:

Bahagian Perhubungan Industri (BPI);

Pn Nurhazrini bt Abdullah Amri :

03-51612622 ext 119

Pn Akhazailiza bt Md Akhir

03-51612622 ext 119

COURSE FEE FINANCING

Course fees can be claimed back from

the Human Resource Development Fund

(HRDF).

* Note

Customised courses are subject to

industry / group request.

ADTEC Shah Alam reserves the right to

cancel or modify the program schedule.

For further information please contact:

Industrial Relations Section;

Pn Nurhazrini bt Abdullah Amri :

03-51612622 ext 119

Pn Akhazailiza bt Md Akhir

03-51612622 ext 126

Hubungi Kami /Contact us :

Pusat Latihan Teknologi Tinggi (ADTEC) Shah Alam

No 5934-1, Jalan Bukit Kemuning, Seksyen 32, 40460 Shah Alam, Selangor Darul Ehsan.

Tel : 03-51612622

Fax : 03-51612651

Website : www.adtecsa.gov.my

Emel:

[email protected]

GPS Coordinate :

3° 00’39.9”N 101°30’36.5”

60


http://www.adtecsa.gov.my

mailto:[email protected]

JMTI

Plot 59, Lrg. Perindustrian Bukit Minyak 15,

Kawasan Perindustrian Bukit Minyak,

14100 Simpang Empat, Seberang Perai, Pulau Pinang.

Email : [email protected]

Tel : 604-508 7806/07

Fax : 604-508 7808/09

Website : http://www.jmti.gov.my

ADTEC Shah Alam

No. 5934-1, Jalan Bukit Kemuning,

Seksyen 32, 40460 Shah Alam,

Selangor Darul Ehsan.


Tel : 603-5161 2622

Fax : 603-5161 2651

Website : http://www.adtecsa.gov.my

ADTEC Batu Pahat

Km 8, Jalan Tanjung Labuh, Karung Berkunci 527,

83000 Batu Pahat, Johor.


Tel : 607-428 7722/7733

Fax : 607-428 4290

Website : http://www.adtecbp.gov.my

ADTEC Melaka

Bandar Vendor Taboh Naning, 78000 Alor Gajah, Melaka.


Tel : 606-552 7227

Fax : 606-552 7231

Website : http://www.adtecmlk.gov.my

ADTEC Kulim

Lot 635, Jalan Mahang, 09500 Karangan

Kulim, Kedah.


Tel : 604-404 2975

Fax : 604-404 2971/3

Website : http://www.adteckulim.gov.my

ADTEC Taiping

PT 15643 Mukim Asam Kumbang, Kemunting Raya,

34600 Kemunting, Taiping, Perak.


Tel : 605-801 2601

Fax : 605-801 2608

Website : http://www.adtectaiping.gov.my

ADTEC Jerantut

KM 9, Jalan Jerantut - Temerloh,

27000 Jerantut,Pahang.


Tel : 093010019/092663391

Fax : 093010021

Website : http://www.adtecjerantut.gov.my

ILP Pedas

Lot 3298, Jalan Pedas-Linggi

71400 Pedas,

Negeri Sembilan.


Tel : 606-685 3564

Fax : 606-685 3577

Website : http://www.ilppedas.gov.my

ILP Kuala Langat

Jalan Sultan Abd. Samad, Kuala Langat,

42700 Banting,

Selangor.


Tel : 603-3120 4600

Fax : 603-4120 4440

Website : http://www.ilpkls.gov.my

ILP Mersing

Lot 16109, Km 16, Jalan Jamaluang,

86800 Mersing, Johor.


Tel : 607-792 1700

Fax : 607-792 1704

Website : http://www.ilpmsg.gov.my

61


ILP Ledang

Kilometer 43, Jalan Segamat

84020 Sagil, Johor.


Tel : 606-977 3800

Fax : 606-977 3799

Website : http://www.ilpledang.gov.my

ILP Pasir Gudang

Jalan Gangsa,

81700 Pasir Gudang, Johor.


Tel : 607-254 4170

Fax : 607-251 1910

Website : http://www.ilppg.gov.my

ILP Selandar

Lot 1468, Jalan Batang Melaka,

77500 Selandar, Melaka.


Tel : 606-525 1224

Fax : 606-525 1255

Website : http://www.ilpselandar.gov.my

ILP Bukit Katil

Lot 1729, Mukim Bukit Katil,

Hang Tuah Jaya,

75450 Melaka,


Tel : 606-232 0600

Fax : 606-232 9600

Website : http://www.ilpmelaka.gov.my

ILP Nibong Tebal

Jalan Bukit Panchor,

14300 Nibong Tebal,

Pulau Pinang.


Tel : 604 595 6000

Fak : 604595 6006

Website : http://www.ilpapnt.gov.my

ILP Kepala Batas

Lot 2022, Penaga,

13200, Seberang Perai Utara,

Pulau Pinang


Tel : 604 04-5776100

Fak : +604 5776144

Website : http://www.ilpkbpp.gov.my

ILP Jitra

Bandar Darulaman

06000 Jitra, Kedah Darulaman


Tel : 604 916 1926

Fax : 604-916 2367

Emel : http://www.ilpjitra.gov.my

ILP Ipoh

Kawasan Perindustrian Taman Meru,

30020 Ipoh, Perak.


Tel : 605-527 7777

Fax : 605-527 0702

Website : http://www.ilpipoh.gov.my

ILP Kangar

Padang Behor, Mukim Sena,

01000 Kangar, Perlis,


TEL : 604-979 4000

FAX : 604-977 7663

Website : http://www.ilpkangar.gov.my/wp/

ILP Perai

Lorong Perusahaan Satu,

Kawasan Perusahaan Perai,

13600 Perai, Pulau Pinang


TEL : 604 390 7269 / 3907335

FAK : 604 3986964

Website : http://www.ilpperai.gov.my/ilp1/

ILP Kuala Terengganu,

Kaw. Perindustrian Gong Badak,

21300 Kuala Terengganu,


NO. TEL : 09-6652100

NO. FAKS : 09-6660806

Website: http://www.ilpkt.gov.my

ILP Kuantan

Lot 10, Kawasan Perindustrian Gebeng,

26080 Kuantan, Pahang,


Tel : 609-583 4951/2

Fax : 609-583 3587

Website : http://www.ilpkuantan.gov.my

62


http://www.ilpkbpp.gov.my/







Head quarters : Jabatan Tenaga Manusia, Kementerian Sumber Manusia

Aras 6, Blok D4, Kompleks D, Pusat Pentadbiran Kerajaan Persekutuan,

62530 Putrajaya.

Tel : 03-88865555, Fax : 03-88892417

Website : http://www.jtm.gov.my, Email : [email protected]

ILP Kuala Lumpur

Jalan Kuchai Lama,

58200 W.P, Kuala Lumpur.


Tel : 606-552 7227

Fax : 606-552 7231

Website : http://www.ilpkl.gov.my

ILP Miri

Lot 3226, Blok 6, Mukim Bandar Baru,

Permaijaya, Kuala Baram,

98100 MIRI,

SARAWAK.


Tel : 6085-655 540

Fax : 6085-653 523

Website : http://www.ilpmiri.gov.my

ILP Sandakan

Batu 5, Jalan Sibuga,

90000 Sandakan,

Sabah


Tel : 089-665715

Fax : 089-665712

Website : http://www.ilpsdk.gov.my/n3/

ILP Kota Kinabalu

Kawasan Perindustrian Kota Kinabalu

KM 7, Jalan Sepanggar, Teluk Sepanggar,

88450 Kota Kinabalu,

Sabah


Tel: 088-498421/498753

Fax: 088-499851

Website : http://www.ilpkk.gov.my

ILP Kota Samarahan

Lot 249, Blok 14, Sarawak Natural Resources Park,

P.O Box (P) 147 Jalan Tun Abdul Razak,

93457 Kuching, Sarawak.


Tel : 6082-465 100

Fax : 6082-465 113/114

Website : http://www.ilpks.gov.my

ILP Labuan

Jalan Mohd Salleh

P.O. Box 80849

87018 Wilayah Persekutuan Labuan

Tel : 087-414911

Fax : 087-422500

Website : http://www.ilplabuan.gov.my/

ADTEC Kemaman

Payoh, 24210 Kemasik, Terengganu,


Tel : 609-866 4000

Fax : 609-866 4040

Website : http://www.adteckmn.gov.my

ADTEC Bintulu

Lot 903, PL957, Blok 37, Kemana Land Distrct,

Jalan Bintulu-Sibu,

97000 Bintulu,

Sarawak.


Tel : 086-310111

Fax : 086-338484

Website : http://www.adtecbintulu.my

ILP Kota Bharu

Pengkalan Chepa,

16100 kota Bharu,

Kelantan.


NO. TEL : 09-774 2315

NO. FAKS : 09-774 245

http://www.ilpkb.gov.my/

ILP Marang

Bukit Parit,

21600 Marang,

Terengganu.


Tel : 609-618 9000

Fax : 609-618 9009

Website : http://www.ilpmrg.gov.my

http://www.jtm.gov.my

PENASIHAT : TN. HJ. ZURAKA BIN YUSOF

PENGERUSI : EN SHAHRULNIZAM BIN SHARIP

PEN. PENGERUSI : PN NORNUZAIHAN BT MOHD USMAN

EDITOR : EN SYED RASHDAN BIN SYED MUBARAK

PN. NORSIAH BT SUKARDY

PN HAZLIZA BT ABU SEMAN

EN. SURESH KUMAR A/L MURUGAYA

PN. ROSE ZAN BT ABD RAHIM

JURUGAMBAR : EN RAHIM BIN TAHIR

ADTEC SHAH ALAM

Hakcipta terpelihara. Tidak dibenarkan mengeluar ulang mana-mana bahagian artikel, gambar dan isi

kandungan laporan tahunan ini dalam apa jua bentuk dan apa jua cara samada elektronik, fotokopi, mekanikal,

rakaman atau cara lain sebelum mendapat izin bertulis.

All rights reserved. Not allowed to be reproduced, stored in any part of the articles, pictures and contents of this

annual report in any form and in any manner whatsoever, whether electronic, mechanical, photocopying,

recording or otherwise without prior written consent.

64


maklumat korporat adtec shah alam · 2019-11-01 · mengesahkan penerimaan aduan dalam tempoh 24...

Documents