magnetostatics 3rd 1
TRANSCRIPT
![Page 1: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/1.jpg)
Unit-2 Unit-2 MagnetostaticsMagnetostatics
Mr. HIMANSHU DIWAKARAssistant ProfessorDepartment of ECE
![Page 2: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/2.jpg)
If charges are moving with constant velocity, a static magnetic (or magnetostatic) field is produced. Thus, magnetostatic fields originate from currents (for instance, direct currents in current-carrying wires).
Most of the equations we have derived for the electric fields may be readily used to obtain corresponding equations for magnetic fields if the equivalent analogous quantities are substituted.
MagnetostaticsMagnetostatics
![Page 3: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/3.jpg)
4
1k
The magnetic field intensity dH produced at a point P by the differential current element Idl is proportional to the product of Idl and the sine of the angle between the element and the line joining P to the element and is inversely proportional to the square of the distance R between P and the element.
IN SI units, , so
2RsinIdlkdH
2R4sinIdlkdH
MagnetostaticsMagnetostatics
Biot – Savart’s Law
![Page 4: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/4.jpg)
Using the definition of cross product we can represent the previous equation in vector form as
The direction of can be determined by the right-hand rule or by the right-handed screw rule.
If the position of the field point is specified by and the position of the source point by
where is the unit vector directed from the source point tothe field point, and is the distance between these twopoints.
)sin( nABaABBA
32 44 RRdlI
RadlIHd r
RR RRar
r
rre
rr
r
32 4)]([
4)(
rrrrdlI
rradlIHd r
Hd
MagnetostaticsMagnetostatics
![Page 5: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/5.jpg)
The field produced by a wire can be found adding up the fields produced by a large number of current elements placed head to tail along the wire (the principle of superposition).
MagnetostaticsMagnetostatics
![Page 6: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/6.jpg)
Types of Current Distributions
Line current density (current) - occurs for infinitesimally thin filamentary bodies (i.e., wires of negligible diameter).
Surface current density (current per unit width) - occurs when body is perfectly conducting.
Volume current density (current per unit cross sectional area) - most general.
GETGI
![Page 7: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/7.jpg)
Ampere’s Circuital Law in Integral Form
Ampere’s Circuit Law states that the line integral of H around a closed path proportional to the total current through the surface bounding the path
GETGI
encC
IldH
![Page 8: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/8.jpg)
Ampere’s Circuital Law in Integral Form (Cont’d)
By convention, dS is taken to be in the
direction defined by the right-hand rule applied
to dl.
S
encl sdJISince volume currentdensity is the most
general, we can write Iencl in this way.
S
dldS
![Page 9: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/9.jpg)
Applying Stokes’s Theorem to Ampere’s Law
GETGI
Sencl
SC
sdJI
sdHldH
Because the above must hold for any surface S, we must have
JH Differential formof Ampere’s Law
![Page 10: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/10.jpg)
Ampere’s Law in Differential Form
Ampere’s law in differential form implies that the B-field is conservative outside of regions where current is flowing.
GETGI
![Page 11: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/11.jpg)
Applications of Ampere’s Law
Ampere’s law in integral form is an integral equation for the unknown magnetic flux density resulting from a given current distribution.
GETGI
enclC
IldH known
unknown
![Page 12: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/12.jpg)
Applications of Ampere’s Law (Cont’d)
In general, solutions to integral equations must be obtained using numerical techniques.
However, for certain symmetric current distributions closed form solutions to Ampere’s law can be obtained.
GETGI
![Page 13: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/13.jpg)
Applications of Ampere’s Law (Cont’d)
Closed form solution to Ampere’s law relies on our ability to construct a suitable family of Amperian paths.
An Amperian path is a closed contour to which the magnetic flux density is tangential and over which equal to a constant value.
GETGI
![Page 14: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/14.jpg)
Magnetic Flux Density of an Infinite Line Current Using Ampere’s Law
Consider an infinite line current along the z-axis carrying current in the +z-direction:
GETGI
I
![Page 15: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/15.jpg)
Magnetic Flux Density of an Infinite Line Current Using Ampere’s Law (Cont’d)
(1) Assume from symmetry and the right-hand rule the form of the field
(2) Construct a family of Amperian paths
GETGI
HaH ˆ
circles of radius where
![Page 16: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/16.jpg)
Magnetic Flux Density of an Infinite Line Current Using Ampere’s Law (Cont’d)
GETGI
Amperian path
II encl
I
x
y
![Page 17: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/17.jpg)
Magnetic Flux Density of an Infinite Line Current Using Ampere’s Law (Cont’d)
(4) For each Amperian path, evaluate the integral
GETGI
HlldHC
2HldHC
magnitude of Hon Amperian
path.
lengthof Amperian
path.
![Page 18: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/18.jpg)
Magnetic Flux Density of an Infinite Line Current Using Ampere’s Law (Cont’d)
(5) Solve for B on each Amperian path
GETGI
lIH encl
2ˆ
IaH
![Page 19: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/19.jpg)
The magnetic flux density vector is related to the magnetic field intensity by the following equation
T (tesla) or Wb/m2
where is the permeability of the medium. Except for ferromagnetic materials ( such as cobalt, nickel, and iron),most materials have values of very nearly equal to that for vacuum,
H/m (henry per meter)The magnetic flux through a given surface S is given by
Wb (weber)
H,HB
7o 104
S
,sdB
![Page 20: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/20.jpg)
0s
sdB
Law of conservation of magnetic flux
Law of conservation of magnetic flux or Gauss’s law for magnetostatic field
![Page 21: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/21.jpg)
JB
B
0
0
0 J
![Page 22: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/22.jpg)
There are no magnetic flow sources, and the magnetic flux lines always close upon themselves
![Page 23: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/23.jpg)
Forces due to magnetic field
There are three ways in which force due to magnetic fields can be experienced
1.Due to moving charge particle in a B field2.On a current element in an external field 3.Between two current elements
![Page 24: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/24.jpg)
Force on a Moving Charge
A moving point charge placed in a magnetic field experiences a force given by
GETGI
BvQ
The force experienced by the point charge is in the direction into the paper.
B
BuqFm
![Page 25: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/25.jpg)
BuqF
EqF
m
e
FFF me
)( BuEqF
Lorentz’s Force equation
Note: Magnetic force is zero for q moving in the direction of the magnetic field (sin0=0)
If a point charge is moving in a region where both electric and magnetic fields exist, then it experiences a total force given by
![Page 26: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/26.jpg)
One can tell if a magneto-static field is present because it exerts forces on moving charges and on currents. If a currentelement is located in a magnetic field , it experiences a force
This force, acting on current element , is in a direction perpendicular to the current element and also perpendicularto . It is largest when and the wire are perpendicular.
Idl B
dF Idl B
B
Idl
B
__
uQlId
Magnetic Force on a current element
![Page 27: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/27.jpg)
FORCE ON A CURRENT ELEMENT
The total force exerted on a circuit C carrying current I that is immersed in a magnetic flux density B is given by
GETGI
C
BldIF
![Page 28: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/28.jpg)
Force between two current elements
Experimental facts: Two parallel wires carrying
current in the same direction attract.
Two parallel wires carrying current in the opposite directions repel.
GETGI
I1 I2
F12F21
I1 I2
F12F21
![Page 29: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/29.jpg)
Force between two current elements
Experimental facts: A short current-carrying
wire oriented perpendicular to a long current-carrying wire experiences no force.
GETGI
I1
F12 = 0I2
![Page 30: Magnetostatics 3rd 1](https://reader036.vdocuments.mx/reader036/viewer/2022081505/587e9b481a28ab2a4a8b45cb/html5/thumbnails/30.jpg)
Force between two current elements
Experimental facts: The magnitude of the force is inversely
proportional to the distance squared. The magnitude of the force is proportional to the
product of the currents carried by the two wires.
GETGI