Upload File

low power mems jitter attenuator - abracon...abmjb-902 part number & configuration guide pin low...

  • Home
  • Documents
  • Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,
7
ABMJB-902 Part Number & Configuration Guide Table 1. Available Part Numbers and Configurations Notes: Please contact Abracon for other configurations. Abracon P/N Input Freq. (MHz) CLK0 CLK1 Optional Pin (CLK2) Power Supply (V) Freq. (MHz) Drive Strength Freq. (MHz) Drive Strength Freq. (MHz) Drive Strength ABMJB-902-104USY 148.5 148.5 High (16mA) Disable Disable 3.3 ABMJB-902-151USY 50 50 Low (4mA) Disable Disable 3.3 ABMJB-902-153USY 25 25 Std (8mA) 25 Std (8mA) 25 Std (8mA) 3.3 ABMJB-902-154USY 40 40 Std (8mA) OE Disable 3.3 ABMJB-902-155USY 25 25 Std (8mA) Disable Disable 3.3 ABMJB-902-156USY 25 25 Std (8mA) PDB 25 Low (4mA) 3.3 ABMJB-902-Q42USY 10/10 10/5 High (16mA) PDB CSEL 3.3 ABMJB-902-Q57USY 40 40 Std (8mA) 40 Std (8mA) 20 Std (8mA) 3.3 ABMJB-902-Q74USY 74.25 74.25 Std (8mA) 74.25 Std (8mA) 74.25 Std (8mA) 3.3 ABMJB-902-Q76USY 1.536 6.144 Std (8mA) OE 1.536 Std (8mA) 3.3 ABMJB-902-Q78USY 1.536 8.192 Low (4mA) OE 2.048 Low (4mA) 3.3 ABMJB-902-Q82USY 74.25/74.25 74.25/27 Std (8mA) 74.25/27 Std (8mA) CSEL 3.3 ABMJB-902- - Packaging T5: 500pcs/reel T3: 3000pcs/reel Configuration Please refer to the Table 1 below for available configurations Low Power MEMS Jitter Attenuator CE RTIFIED ABRACON IS CE RTIFIED ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale LLC Pb RoHS/RoHS II Compliant OPTIONS AND PART IDENTIFICATION: 2.9 x 2.8 x 1.45 mm SOT23-6L Moisture Sensitivity Level: MSL=1 ESD Sensitive

Upload: others

Post on 12-Aug-2020

3 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Table 1. Available Part Numbers and Configurations

Notes: Please contact Abracon for other configurations.

Abracon P/N Input Freq. (MHz)

CLK0 CLK1 Optional Pin (CLK2) Power Supply

(V) Freq. (MHz)

Drive Strength

Freq. (MHz)

Drive Strength

Freq. (MHz)

Drive Strength

ABMJB-902-104USY 148.5 148.5 High (16mA) Disable Disable 3.3

ABMJB-902-151USY 50 50 Low (4mA) Disable Disable 3.3

ABMJB-902-153USY 25 25 Std (8mA) 25 Std

(8mA) 25 Std (8mA) 3.3

ABMJB-902-154USY 40 40 Std (8mA) OE Disable 3.3

ABMJB-902-155USY 25 25 Std (8mA) Disable Disable 3.3

ABMJB-902-156USY 25 25 Std (8mA) PDB 25 Low

(4mA) 3.3

ABMJB-902-Q42USY 10/10 10/5 High (16mA) PDB CSEL 3.3

ABMJB-902-Q57USY 40 40 Std (8mA) 40 Std

(8mA) 20 Std (8mA) 3.3

ABMJB-902-Q74USY 74.25 74.25 Std (8mA) 74.25 Std

(8mA) 74.25 Std (8mA) 3.3

ABMJB-902-Q76USY 1.536 6.144 Std (8mA) OE 1.536 Std

(8mA) 3.3

ABMJB-902-Q78USY 1.536 8.192 Low (4mA) OE 2.048 Low

(4mA) 3.3

ABMJB-902-Q82USY 74.25/74.25 74.25/27 Std (8mA) 74.25/27 Std

(8mA) CSEL 3.3

ABMJB-902- -

Packaging T5: 500pcs/reel T3: 3000pcs/reel

Configuration Please refer to the Table 1 below for available configurations

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

Pb RoHS/RoHS II Compliant

OPTIONS AND PART IDENTIFICATION:

2.9 x 2.8 x 1.45 mm SOT23-6L

Moisture Sensitivity Level: MSL=1ESD Sensitive

Page 2: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Pin No. Pin Name Pin Type Pin Level Function1 DNC Do not connect 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O CLK2 output 6 CLK0 O LVCMOS CLK0 output

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

2.9 x 2.8 x 1.45 mm SOT23-6L

PIN DESCRIPTION AND BLOCK DIAGRAM ABMJB-902-104USY:

SOT23-6L package

ABMJB-902-151USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 DNC Do not connect 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O CLK2 output 6 CLK0 O LVCMOS CLK0 output

Pb RoHS/RoHS II CompliantESD Sensitive

Page 3: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

2.9 x 2.8 x 1.45 mm SOT23-6L

ABMJB-902-153USY:

SOT23-6L package

ABMJB-902-154USY:

Pin No. Pin Name Pin Type Pin Level Function 1 CLK1 O LVCMOS CLK1 output 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 OE I LVCMOS Output enable control input with pull-up 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

Pb RoHS/RoHS II CompliantESD Sensitive

PIN DESCRIPTION AND BLOCK DIAGRAM

Page 4: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

2.9 x 2.8 x 1.45 mm SOT23-6L

ABMJB-902-155USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 DNC Do not connect 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O CLK2 output 6 CLK0 O LVCMOS CLK0 output

ABMJB-902-156USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 PDB I LVCMOS Power down 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

Pb RoHS/RoHS II CompliantESD Sensitive

PIN DESCRIPTION AND BLOCK DIAGRAM

Page 5: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

2.9 x 2.8 x 1.45 mm SOT23-6L

ABMJB-902-Q42USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 PDB I LVCMOS Power down 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CSEL I LVCMOS Configuration select control input with pull-up 6 CLK0 O LVCMOS CLK0 output

:

-Q57USYABMJB-902

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 CLK1 O LVCMOS CLK1 output 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

Pb RoHS/RoHS II CompliantESD Sensitive

PIN DESCRIPTION AND BLOCK DIAGRAM

Page 6: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

2.9 x 2.8 x 1.45 mm SOT23-6L

ABMJB-902-Q74USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 CLK1 O LVCMOS CLK1 output 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

ABMJB-902-Q76USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 OE I LVCMOS Output enable control input with pull-up 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

Pb RoHS/RoHS II CompliantESD Sensitive

PIN DESCRIPTION AND BLOCK DIAGRAM

Page 7: Low Power MEMS Jitter Attenuator - Abracon...ABMJB-902 Part Number & Configuration Guide Pin Low Power MEMS Jitter Attenuator CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 2 Faraday,

ABMJB-902 Part Number & Configuration Guide

Low Power MEMS Jitter Attenuator

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS ISO9001:2008

CERTIFIED

2 Faraday, Suite# B | Irvine | CA 92618 Revised: 03.26.15Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale

LLC

2.9 x 2.8 x 1.45 mm SOT23-6L

ABMJB-902-Q78USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 OE I LVCMOS Output enable control input with pull-up 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CLK2 O LVCMOS CLK2 output 6 CLK0 O LVCMOS CLK0 output

ABMJB-902-Q82USY:

SOT23-6L package

Pin No. Pin Name Pin Type Pin Level Function 1 CLK1 O LVCMOS CLK1 output 2 GND GND Power supply ground 3 REF_IN I, (SE) LVCMOS Reference clock input 4 VDD PWR Power supply 3.3V 5 CSEL I LVCMOS Configuration select control input with pull-up 6 CLK0 O LVCMOS CLK0 output

Pb RoHS/RoHS II CompliantESD Sensitive

PIN DESCRIPTION AND BLOCK DIAGRAM


QUAD T1/E1 SHORT HAUL IDT82V2044 LINE … Sheets/IDT/IDT82V2044.pdfQUAD T1/E1 SHORT HAUL LINE INTERFACE UNIT IDT82V2044 FUNCTIONAL BLOCK DIAGRAM Figure-1 Block Diagram Jitter Attenuator

UHF RFID Antenna - Abracon

Engineering/Process Change Notice - Abracon

SHIELDED POWER INDUCTOR - Abracon

High Performance Low Jitter SMD XO - Abracon · ASG2-LJ FEATURES: APPLICATIONS: 2.5 x 2.0 x 1.0 mm STANDARD SPECIFICATIONS: • LVCMOS, LVDS or LVPECL output option • +2.5V or +3.3V

Si5316 Precision Clock Jitter Attenuator

Plastic Package Industrial Grade Ultra Miniature Pure ... · Tf 0.8 2.0 ns 20%/80%*VDD Cycle to Cycle Jitter: 50 ps F=100MHz Period Jitter RMS: 5 ps F=100MHz LLC ABRACON IS ISO9001-2008

Si5395/94/92 Data Sheet...Si5395/94/92 Data Sheet 12-Channel, Any-Frequency, Any-Output Jitter Attenuator/ Clock Multiplier with Ultra-Low Jitter The Si5395/94/92 Jitter attenuators

FOUR CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER · xrt75l04 3 rev. 1.0.4 four channel e3/ds3/sts-1 line interface unit with jitter attenuator •outputs either single-rail

Features Applications - Abracon › datasheets › AK2.pdfClearClock Ultra-Low Jitter, Fixed-Freuency Miniature Clock Oscillator Pb 2.5 x 2.0 x 1.0 mm RH S/RoHS II Compliant MSL =

Jitter Fundamentals: Jitter Tolerance Testing with Agilent

OCTAL E1 SHORT HAUL LINE INTERFACE UNIT …pdf.datasheet.directory/datasheets-1/integrated_device_technology/... · SONET/SDH optimized jitter attenuator meets ITU G.783 ... remote

ASGTX Evaluation Board - abracon.com · ASGTX-Eval ASVMP CERTIFIED ABRACON IS CERTIFIED ISO9001:2008 Low Jitter High Performance Moisture Sensitivity Level – N/A Pb RoHS/RoHS II

XRT83SL30XRT83SL30 2 SINGLE-CHANNEL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR REV. 1.0.1 FEATURES •Fully integrated single-channel short-haul transceiver

LOW JITTER CRYSTAL OSCILLATOR - Abracon · 2013-09-05 · ABLJO LOW JITTER CRYSTAL OSCILLATOR ABRACON IS CERTIFIED ISO9001:2008 TIFIED 14.3 X 8.7 X 5.5 mm STANDARD SPECIFICATIONS

Microwave Attenuator

LOW JITTER CRYSTAL OSCILLATOR - Abracon · PDF fileabljo low jitter crystal oscillator abracon is certified iso9001:2008 tified 14.3 x 8.7 x 5.5 mm standard specifications - continued

Jitter Basics Lab Using SDAIII & Jitter Sim - Teledyne LeCroycdn.teledynelecroy.com/.../jitter_basics_lab_using_jitter_sim.pdf · Jitter Basics Lab Using SDAIII & Jitter Sim TUTORIAL

LOW JITTER PIN CONFIGURABLE LVDS-CMOS DUAL - Abracon

Attenuator Brochure

Attenuator Basics

FemtoClock NG Jitter Attenuator and 8V19N408 Clock … Sheets/IDT/8V19N408.pdf · FemtoClock® NG Jitter Attenuator and Clock Synthesizer ... 2500MHz (VCO-0) and ... • Core timing

XRT83L30 - MaxLinear · XRT83L30 2 SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR REV. 1.0.1 FEATURES •Fully integrated single-channel long-haul

Features Applications - Abracon

Experiment 8 - Attenuator

Jitter vs SNR for ADCs - TI Training 4704 - Jitter... · Sampling Clock Jitter Sampling jitter is combination of: • External jitter • Internal ADC aperture jitter 2 _ 2 T Jitter

Multiband Antenna Module - Abracon

Jitter Fundamentals: Agilent 81250 ParBERT Jitter

Timing Jitter Tutorial & Measurement Guide...4 Types of Jitter Jitter falls into two broad categories: random jitter and deterministic jitter*. Random Jitter Random jitter is a broadband

Low Power MEMS Jitter Attenuator - Abracon · PDF fileLow Power MEMS Jitter Attenuator ... 10MHz input clock with bad period jitter - 460pcs peak-to-peak period jitter ABMJB-902 Low

LS Attenuator

High Performance, 3.2 GHz, 14-Output Jitter Attenuator ... · High Performance, 3.2 GHz, 14-Output Jitter Attenuator with JESD204B Data Sheet HMC7044 Rev. B Document Feedback Information

Si5344H/42H Rev D - Silicon LabsSi5344H/42H Rev D HIGH-FREQUENCY, ULTRA-LOW JITTER ATTENUATOR CLOCK WITH DIGITALLY-CONTROLLED OSCILLATOR Features Applications Description This specialized

VCXO and Synchronous Ethernet 810251I Jitter Attenuator

Si5316 Precision Clock Jitter Attenuator...Output Drive Current CKOIO CMOS Driving into CKOVOL for out-put low or CKO VOH for output high. CKOUT+ and CKOUT– shorted externally. VDD