long range wireless lan platform wireless isp networking scenario ver. e; aug 2006
TRANSCRIPT
Long Range Wireless LAN Platform
Wireless ISP Networking Scenario
Ver. e; Aug 2006
2.5 or 2.4 GHz or 5.8GHz Bridge unit as backhaul for upper level transmission2.4GHz AP & WEC/CPE (PCMCIA, PCI, USB, Centrino) for blanketing the local area
2.5 or 2.4/5.8GHzBridge
2.5 or 2.4/5.8GHzBridge 2.5 or 2.4/5.8GHz
Bridge
Bridge as back-bone for connecting areas/nodes every 15~25Km
AP on Node(Cell)
AP on Node(Cell)
AP on Node(Cell)
CPE forCompany
CPE inhouse
AP on Node is connected by CAT5 cable to 5.8GHz Bridge
2.4GHz to blanket a certain area, building, companies and personal user
2.4GHz
ISP Main Building
Network Operating Scenario
HUB
RouterwiredWAN
OR
SatelliteReceiver
Satellite
To WAN
SatelliteBroadbandProvider
HUB
A-1000
CPE inhouse
Bridge as backbone
20Km
To next node
AP on Node(Cell)
Blanket theLocal clients
+ 20Km
Scenario on each AP Tower
2.4/5.8GHz/Bridge and 2.4GHz/AP is connected by CAT5 cable
Communicating to Master (Bridge) on ISP main building
Communicating to Wi-Fi clients:
2.4 /5.8GHzBridge
2.4GHzAID2401 inhouse
WL-2410GM/WEC
AID-2401/WECWL-24005G/WECWL-2410GM/WEC
Bridge/Master2
BridgeSlave 2
3 tips for node-to-node connection : TIP 1
Bridge/Master1
Internet ISP
LANServer
HUB
H U B
PC PC PCPC
PC
PC
BridgeSlave 1
10Km~25Km
10Km 25Km
10Km ~25Km
HUB
AP
AP
AP
H U B
AP AP AP
H U B
AP AP AP
This scenario is utilizing Point-to-MultiPointconcept; with the scenario of Master to Master, the wireless coverage can be doubledwhile the LAN network can be wirelessly extended by times.
10Km~25Km
10Km ~25Km
H U B
Bridge AP
H U B
Bridge AP
Wired Connection in the mid-way point,It is best recommended, The great advantage is “No Speed Reduced”
3 tips for node-to-node connection : TIP 2
BridgeSlave 1
Bridge/Master1
Bridge/Master2
BridgeSlave 2
BridgeMaster
BridgeSlave 1
BridgeSlave 2
10~25Km 10~25Km
The distance from Slave 1 via Master to Slave 2 is totaledat 20~40Km. All are going through radio transmission.The antenna to be used in this scenario mustbe ‘omni’ type. CellAmericas supplies the professional high-gainomni-antenna for point-to-multipoint network.
3 tips for node-to-node connection : TIP 3
WL-5805 + PG-5822, 22-dbi parabolic antenna Under Bridge Mode : as the data ‘backbone’ for connecting node to node.
Via the CAT5 cable, it is connected to the node Access Point (AP), WL-2410/AP
And then the WL-2410/AP will blanket the clients (WEC/CPE) in this node/area.
Component for ISP outdoor long range Bridge as Back-bone - 1
WL-2510 + PG-2524, 24-dbi parabolic antenna Under Bridge Mode : as the data ‘backbone’ for connecting node to node.
Via the CAT5 cable, it is connected to the node Access Point (AP), WL-2410/AP
And then the WL-2410/AP will blanket the clients (WEC/CPE) in this node/area.
Component for ISP outdoor long range Bridge as Back-bone - 2
Component for ISP outdoor long range Access Point
WL-2410GM/AP
1 Watt, Outdoor unitwith Omni-antenna, 15-dbi
Component for ISP outdoor long range WEC/CPE 1
WL-2410GM/CPE
1 Watt, Outdoor unitwith Grid-antenna, 24-dbi
Component for ISP outdoor long range WEC/CPE 2
WL-24005G/CPE
100 mW, Outdoor unitwith 15-dbi flat-panel antenna
Component for ISP indoor long range WEC/CPE 3
AID-2401SUPER G/CPE
200 mW, Indoor unitwith external 13-dbi Yagi antenna
AID-2401 SUPER G/WEC unit 200mW
With rubber omni, 3-dbiantenna for Mobile application (can do roaming among AP’s)
Existing mold as OPTION
Component for ISP indoor long range WEC/CPE 4
G4100 Network Administrator for client authentication and management.
1200 subscriber account 500 users on-line simultaneouslyDHCP server AuthenticationUser Management Traffic ReportCurrent Status Monitoring FirewallRoute re-Direction and Extension Service ExpansionBandwidth management Billing……
Component 5
CellAmericas Enterprises, [email protected]
Tel : +305-651-9978Fax : +305-770-4672
WiFi InnovationThank you !
David Gould, [email protected]