laser printing of organic light- emitting diode pixels by lift · polyfluorene-based organic...
TRANSCRIPT
![Page 1: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/1.jpg)
Laser printing of organic light-emitting diode pixels by LIFT
James Shaw-Stewart
![Page 2: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/2.jpg)
Optimising the fabrication of OLEDs by laser-induced forward transfer
Functional Thin Films
16th October 2014 James Shaw-Stewart 2
![Page 3: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/3.jpg)
OLED device architecture
• The layered arrangement for a standard OLED is shown:
– A transparent anode (usually ITO) and a cathode sandwich the following possible functional layers:
James Shaw-Stewart
1. Electron-blocking and/or hole-transporting layers
2. Light emitting layer (or interface) 3. Hole-blocking and/or electron-
transporting layer
3 16th October 2014
![Page 4: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/4.jpg)
LIFT with a sacrificial dynamic release layer (DRL)
– A photosensitive layer which is sacrificially ablated by the laser beam, in order that the transfer material may be propelled forward as a flyer:
– A type of triazene polymer is used
for these experiments:
16th October 2014 4 James Shaw-Stewart
![Page 5: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/5.jpg)
Early shadowgraphy experiments
16th October 2014 James Shaw-Stewart 5
At atmosphere At low pressure
350 nm triazene
80 nm aluminium F = 270 mJ/cm2
![Page 6: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/6.jpg)
Improved LIFT
• The receiver substrate plays a significant role in assisting transfer
16th October 2014 James Shaw-Stewart 6
PEDOT:PSS improved transfer at low fluences
![Page 7: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/7.jpg)
Improved LIFT
• The receiver substrate plays a significant role in assisting transfer. – PEDOT:PSS improved transfer at
low fluences
• The substrate-substrate gap has been controlled – Enabling switching of donor
substrate, and greater reproducibility
• Reduced pressure improves transfer success significantly. – Removes the reflected acoustic
shock wave, and air drag
16th October 2014 James Shaw-Stewart 7
![Page 8: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/8.jpg)
1 mbar
James Shaw-Stewart
55
65
78
90
105
140
40 µm GAP
5 µm
Fluence (mJ/cm2) 1 mm
Fused Si substrate
190 nm TP 80 nm Ag
80 nm PFO
Glass substrate
30 nm PEDOT:PSS Receiver substrate Donor substrate
16th October 2014 8
![Page 9: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/9.jpg)
1 mbar transfer morphology
James Shaw-Stewart 16th October 2014 9
Shaw-Stewart et al. (2011). "Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate-substrate gap width." Applied Physics A 105(3): 713-722.
![Page 10: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/10.jpg)
OLEDs
• Different types of OLEDs can be fabricated by LIFT: – PLEDs
– PhOLEDs
– SMOLEDs
• Charge injecting and transporting layers can be added to improve performance. – More flexibility is available in
terms of surface modification.
16th October 2014 James Shaw-Stewart 10
![Page 11: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/11.jpg)
OLEDs
• Different types of OLEDs can be fabricated by LIFT: – PLEDs
– PhOLEDs
– SMOLEDs
• Charge injecting and transporting layers can be added to improve performance. – More flexibility is available in
terms of surface modification.
• Sequential layer-by-layer deposition of a working PLED has been demonstrated.
16th October 2014 James Shaw-Stewart 11
![Page 12: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/12.jpg)
Normal vs LIFTed device architecture
• LIFT allows direct-write patterning
• Inverse fabrication of OLED donor substrate
DO
NO
R
LIFT LEP deposition
HTL deposition
cathode evaporation
NOT TO SCALE
16th October 2014 12 James Shaw-Stewart
Normal LIFT
![Page 13: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/13.jpg)
OLED device fabrication
• Standard:
• Laser transferred:
James Shaw-Stewart 13
Aluminium cathode
ITO anode
Organic layers
Silver paste
Glass substrate
16th October 2014
![Page 14: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/14.jpg)
Optimized PFO devices
NOT TO SCALE
16th October 2014 14 James Shaw-Stewart
• All at 1 mbar, with 12 µm gap
Shaw-Stewart et al. (2012). "Red-green-blue polymer light-emitting diode pixels printed by optimized laser-induced forward transfer." Applied Physics Letters 100(20): 203303-203304.
![Page 15: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/15.jpg)
Optimized PFO devices
• Good tri-colour LIFTed OLEDs
• Only blue EL spectrum is a bit shifted
Original With tba
(tetrabutylammonium)
40 nm PVK
60 nm PEDOT:PSS
140 nm ITO
Glass substrate
Qz substrate
190 nm TP
80 nm Al
50 nm PFO (: dye)
tba
Donor Substrate
Receiver Substrate
16th October 2014 15 James Shaw-Stewart
![Page 16: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/16.jpg)
• Normal phosphorescent PLEDs with Ca electrode are most efficient
• LIFTed devices have efficiencies around 1-2 %
• Tetrabutylammonium noticeably improves device efficiencies
• Normal blue device with lowest operating voltage
PFO functionality
16th October 2014 16 James Shaw-Stewart
![Page 17: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/17.jpg)
Thin film transistors
• Concurrently, as part of the e-LIFT project, a lot of work has been carried out on the transfer of organic TFT materials
M. Makrygianni et al., Applied Physics A (2013), doi:10.1007/s00339-012-7134-9
L. Rapp, et al., Thin Solid Films (2011), doi:10.1016/j.tsf.2011.10.159
16th October 2014 James Shaw-Stewart 17
![Page 18: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/18.jpg)
16th October 2014 James Shaw-Stewart 18
Wang et al. (2013). "Fast Chemical Imaging at High Spatial Resolution by Laser Ablation Inductively Coupled Plasma Mass Spectrometry." Analytical Chemistry 85(21): 10107-10116.
![Page 19: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/19.jpg)
16th October 2014 James Shaw-Stewart 19
New applications
• Other applications include: 1. Scientific
research
2. Organic photovoltaic arrays
3. Printed circuit boards with embedded passive components
1.
2.
3.
![Page 20: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/20.jpg)
Acknowledgements
• Doctorvater: – Professor Alexander Wokaun (ETHZ & PSI)
• Supervisors – Professor Thomas Lippert (PSI & ETHZ) – Professor Frank Nüesch (Empa & EPFL) – Dr. Matthias Nagel (Empa)
• Experimental colleagues: – Dr. Romain Fardel (PSI) – Dr. Thomas Mattle (PSI) – Ylenia Maniglio (Empa) – Pascal Frank (Konstanz) – Dr. Valentina Dinca (Bucharest) – Dr. Alexandra Palla-Papavlu (Bucharest)
• Funding: – Swiss national science
foundation (SNF)
– EU e-LIFT project
16th October 2014 James Shaw-Stewart 20
![Page 21: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/21.jpg)
THANK YOU!
16th October 2014 James Shaw-Stewart 21
![Page 22: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/22.jpg)
First-author publications
• Shaw Stewart, J., R. Fardel, et al. (2010). "The effect of laser pulse length upon laser-induced forward transfer using a triazene polymer as a dynamic release layer." Journal of Optoelectronics and Advanced Materials 12(3): 605-609.
• Shaw Stewart, J., T. Lippert, et al. (2010). "Laser-Induced Forward Transfer Using Triazene Polymer Dynamic Releaser Layer." AIP Conference Proceedings 1278(1): 789-799.
• Shaw-Stewart, J., B. Chu, et al. (2011). "Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate-substrate gap width." Applied Physics A: Materials Science & Processing 105(3): 713-722.
• Shaw-Stewart, J., T. Lippert, et al. (2011). "Laser-Induced Forward Transfer of Polymer Light-Emitting Diode Pixels with Increased Charge Injection." ACS Applied Materials & Interfaces 3(2): 309-316.
• Shaw-Stewart, J. R. H., T. Lippert, et al. (2012). "A simple model for flyer velocity from laser-induced forward transfer with a dynamic release layer." Applied Surface Science 258(23): 9309-9313.
• Shaw-Stewart, J., T. Lippert, et al. (2012). "Sequential Printing by Laser-Induced Forward Transfer to Fabricate a Polymer Light-Emitting Diode Pixel." ACS Applied Materials & Interfaces 4(7): 3535-3541.
• Shaw Stewart, J., T. Lippert, et al. (2012). "Red-green-blue polymer light-emitting diode pixels printed by optimized laser-induced forward transfer." Applied Physics Letters 100(20): 203303-203304.
• Shaw Stewart, J. R. H. S. (2012). Optimising the fabrication of organic light-emitting diodes by laser-induced forward transfer, ETH Zürich.
• Shaw-Stewart, J., T. Mattle, et al. (2013). "The optimisation of the laser-induced forward transfer process for fabrication of polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press).
• Shaw-Stewart, J. R. H., T. Mattle, et al. (2013). "The fabrication of small molecule organic light-emitting diode pixels by laser-induced forward transfer." Journal of Applied Physics 113(4): 043104-043107.
16th October 2014 James Shaw-Stewart 22
![Page 23: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/23.jpg)
Co-author publications
• Dinca, V., R. Fardel, et al. (2010). "Laser-Induced Forward Transfer: An Approach to Single-Step Polymer Microsensor Fabrication." Sensor Letters 8: 436-440.
• Dinca, V., A. Palla-Papavlu, et al. (2010). "Polymer pixel enhancement by laser-induced forward transfer for sensor applications." Applied Physics A: Materials Science & Processing 101(3): 559-565.
• Palla-Papavlu, A., V. Dinca, et al. (2010). "Laser induced forward transfer of soft materials." Journal of Optics 12(12): 124014.
• Palla-Papavlu, A., V. Dinca, et al. (2010). "Microfabrication of polystyrene microbead arrays by laser induced forward transfer." Journal of Applied Physics 108(3): 033111-033116.
• Frank, P., J. Shaw-Stewart, et al. (2011). "Laser-induced ablation dynamics and flight of thin polymer films." Applied Physics A: Materials Science & Processing 104(2): 579-582.
• Palla-Papavlu, A., I. Paraico, et al. (2011). "Liposome micropatterning based on laser-induced forward transfer." Applied Physics A: Materials Science & Processing 102(3): 651-659.
• Mattle, T., J. Shaw-Stewart, et al. (2012). "Laser induced forward transfer aluminum layers: Process investigation by time resolved imaging." Applied Surface Science 258(23): 9352-9354.
• Mattle, T., J. Shaw-Stewart, et al. (2013). "Shadowgraphic investigations into the laser-induced forward transfer of different SnO2 precursor films." Applied Surface Science 278: 77-81.
• Wang, H. A. O., D. Grolimund, et al. (2013). "Fast Chemical Imaging at High Spatial Resolution by Laser Ablation Inductively Coupled Plasma Mass Spectrometry." Analytical Chemistry 85(21): 10107-10116.
16th October 2014 James Shaw-Stewart 23
![Page 24: Laser printing of organic light- emitting diode pixels by LIFT · polyfluorene-based organic light-emitting diode pixels." Applied Surface Science(in press). •Shaw-Stewart, J. R](https://reader033.vdocuments.mx/reader033/viewer/2022052801/5f1239fac5abcc79a36e8eb4/html5/thumbnails/24.jpg)
e-LIFT http://www.e-lift-project.eu/
• Laser printing of organic/inorganic material for the fabrication of electronic devices
• 3 year project from 2010-2012
• €4.2M budget project
PARTNERS • CNRS - LP3 (FR) • ARMINES - EMSE (FR) • Paul Scherrer Institut (CH) • EMPA (CH) • National Technical University of Athens (GR) • University of Barcelona (SP) • University of Southampton - ORC (UK) • INFLPR (RO) • CNR - IDAC (IT) • Laser Micromachining Limited (UK) • ACXYS Technologies (FR) • MICROSENS S.A. (CH) • TAGSYS (FR) • BIOSENSOR S.R.L. (IT) • Toplink Innovation (FR)
16th October 2014 James Shaw-Stewart 24