large specalog for d7e track-type tractor, … · the d7e is especially popular in waste and...
TRANSCRIPT
Engine
Engine Model Cat® C9.3 ACERT™
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
Net Power (Rated)
ISO 9249/SAE J1349 178 kW 238 hp
ISO 9249/SAE J1349 (DIN) 241 hp
Engine (continued)
Net Power (Maximum)
ISO 9249 187 kW 251 hp
ISO 9249 (DIN) 254 hp
Weights
Operating Weight – STD SU 26 055 kg 57,441 lb
Operating Weight – LGP S 28 525 kg 62,886 lb
D7ETrack-Type Tractor
2
D7E Features
Electric Drive Power TrainThe D7E is built around a revolutionary electric drive system that delivers excellent dozing efficiency and performance. The D7E uses less fuel and fewer parts to help reduce lifetime owning and operating costs.*
Fuel/Fluid EfficiencyThe D7E is up to 30 percent more fuel efficient than the D7R2. Efficient use of Diesel Exhaust Fluid (DEF) – typically 2-2.5 percent of fuel consumption – gives you excellent overall fluid efficiency.
Integrated TechnologiesCat Connect makes smart use of technology and services like Cat AccuGrade™ and Product Link™/VisionLink® to help you monitor, manage and enhance job site operations.
Powerful ProductivityNew features like Stable Blade Control and Traction Control add to the overall productivity of the D7E.
*Compared to the D7R2.
ContentsPower and Performance....................................4
Operator Environment ........................................6
Emissions Technology ........................................7
Integrated Technologies ....................................8
Equipped for the Job ........................................10
Special Arrangements .....................................11
Serviceability and Customer Support ............12
Safety ..................................................................14
Sustainability .....................................................14
Specifi cations ....................................................15
Standard Equipment .........................................19
Optional Equipment...........................................20
Notes ...................................................................21
3
Since the introduction of the D7E dozer, customers worldwide have saved millions of liters/gallons of diesel fuel and reduced overall emissions.* The D7E features an innovative diesel-electric power train that helps you save money by getting more work done while using signifi cantly less fuel. Electric drive gives you the power you need for dozing, along with the smooth operation and agile maneuverability suited to a wide variety of applications. The new D7E meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
*Compared to the D7R2.
4
Electric DriveA revolutionary Electric Drive system is designed to deliver
quantum leaps in improved productivity and fuel effi ciency.
The D7E is up to 30 percent more fuel effi cient than the D7R2.
Better fuel economy plus greater productivity means you
can move up to 35 percent more material per gallon/liter of
fuel. And the D7E is more productive – moving 10 percent
more material per hour. Fewer moving parts, less fuel and
fl uid and longer service intervals help reduce lifetime owning
and operating costs.
1 Advanced Electronics Control the PowerElectric generator, power inverter and propulsion module
replace traditional components like a torque converter and
transmission. A Cat C9.3 ACERT engine turns a powerful electric
generator that effi ciently converts mechanical energy into
AC electrical current.
2 Electric Propulsion Powers the Final DrivesCurrent from the generator fl ows through specially armored
cables and military grade connectors to a solid-state power
inverter. Advanced electronics send AC current to the propulsion
module to control the motors and provides DC current for the
accessory systems. The propulsion module, featuring state-
of-the-art AC electric motors, delivers well-modulated torque
via axles to the fi nal drives.
3 Fully Sealed and Liquid CooledDrive train electrical components are fully sealed, so the
D7E can safely operate in a wide range of dozing conditions.
Liquid cooling ensures that the electric drive components
deliver peak performance in extreme-temperature conditions.
Note: Productivity, effi ciency and owning/operating cost compared to previous D7R2 model.
1
2
3
Powerful ManeuverabilityDifferential steering combines with electric drive to make the D7E so maneuverable
that it can perform both uninterrupted power turns under load and “locked-track”
pivot turns. A dedicated D8-size steering pump delivers improved performance.
The electric drive system is highly effi cient at delivering engine power to the
ground, and an infi nitely variable speed control means smooth operations
with no gears to shift.
Cooling SystemThe D7E uses a three-part, aluminum bar core radiator for charged air, jacket
water and the separate circuit. The single-plane design allows for easier cleaning
and a 6-fi ns-per-inch design helps reduce plugging. A molded shroud ensures
effi cient air fl ow and the fan utilizes lightweight, durable blades for high effi ciency
and quiet operation. In cooler conditions, the hydraulic demand fan reduces speed
to conserve power, save fuel and decrease sound levels. An optional reversing fan
is available for high debris conditions.
Power and PerformanceBuilt to get the job done with less
Traction ControlNew standard feature reduces track slip for improved productivity and reduced
undercarriage wear.
Stable Blade ControlStandard Stable Blade Control complements operator input to automatically make
instantaneous adjustments for smoother grading results with less effort.
Economy ModeWhen in use, Economy Mode automatically adjusts engine speed when machine is not
under load to save you fuel. The operator’s selected machine speed is maintained.
Load Sensing HydraulicsField-proven system senses the load and continuously adjusts hydraulic power to
maximize your work tool effi ciency.
5
6
Operator EnvironmentComfort and productivity
The D7E features a quiet, spacious cab. The center-post design gives you outstanding
visibility all around the machine to help operators work more confi dently and safely.
Operators can also enjoy added comforts like manually adjustable armrests and a
heated/ventilated seat option.
The in-dash display monitors machine conditions in real time. Mount a grade control
system display in the dash to put working information conveniently in front of the operator.
A new in-cab main fall/cross slope display shows you real-time grade percentage during
slope work.
A single-unit cab-mounted heating, ventilation and air conditioning (HVAC) system is self
contained and powered by the accessory power converter for more effi cient cooling.
Implement and Steering Controls• Ergonomic controls are fully adjustable and designed for low-effort comfort. Switches and
controls for various systems are located within easy reach of the operator.
• Speed recall feature allows operators to pre-set the desired forward and reverse travel
speed, and then resume that speed simply by pressing a button.
• Implement Lock-Out prevents inadvertent operation of hydraulic attachments.
7
Emissions reduction technology on the D7E is designed to
be transparent, with no action required from the operator.
Regeneration runs automatically in the background while
you work.
Aftertreatment TechnologiesCaterpillar designed earlier models with Tier 4 Final/Stage IV/
Japan 2014 (Tier 4 Final) standards in mind. To meet the additional
80 percent reduction in NOx emissions, Caterpillar engineers
added Selective Catalytic Reduction (SCR) to the already
proven aftertreatment solution.
Diesel Exhaust FluidSelective Catalytic Reduction utilizes Diesel Exhaust Fluid
(DEF), which can be conveniently refi lled when you refuel.
A gauge on the dash shows your fl uid level. The D7E offers
excellent fl uid effi ciency. Across a variety of applications,
the D7E typically has used DEF at a rate of 2-2.5 percent
of fuel consumption.
When the machine is turned off, a pump will automatically
purge the DEF lines to help prevent freezing. A symbol on the
dash and a light/symbol on the Ground Level Service Center
indicate when the purge is complete and that it is safe to turn
off the electrical disconnect. If the engine/aftertreatment
temperatures are high, a Delayed Engine Shutdown will activate
automatically to cool the machine and then purge the lines.
For complete aftertreatment information, please refer to your
machine’s Operation and Maintenance Manual.
Emissions TechnologyProven, integrated solutions
8
Integrated TechnologiesMonitor, manage and enhance job site operations
Cat Connect makes smart use of technology and services to
improve your job site effi ciency. Using the data from technology
equipped machines, you’ll get more information and insight into
your equipment and operations than ever before.
Cat Connect technologies offer improvements in these key areas:
Equipment Management – increase uptime and
reduce operating costs.
Productivity – monitor production and manage
job site effi ciency.
Safety – enhance job site awareness to keep your
people and equipment safe.
9
Featured Cat Connect technologies include:
LINK TechnologiesLINK technologies wirelessly connect you to your equipment giving you
access to essential information you need to know to run your business.
LINK data can give you valuable insight into how your machine or fl eet is
performing so you can make timely, fact-based decisions that can boost
job site effi ciency and productivity.
Product Link/VisionLinkProduct Link is deeply integrated into your machine, helping you take
the guesswork out of equipment management. Easy access to timely
information like machine location, hours, fuel usage, idle time and event
codes via the online VisionLink user interface can help you effectively
manage your fl eet and lower operating costs.
GRADE TechnologiesGRADE technologies combine digital design data, in-cab guidance,
and automatic controls to enhance grading accuracy, reduce rework,
and lower costs related to production earthmoving and rough, fi ne and
fi nish grade applications.
Cat AccuGradeAccuGrade is a dealer-installed aftermarket grade control system
that provides higher accuracy capabilities by adding laser, GPS and
UTS technology when required. The factory AccuGrade Ready Option
provides optimal mounting locations, brackets, and hardware and
simplifi es installation. Deep Integration optimizes machine and system
performance to maximize productivity.
10
The D7E features a robust, single lift cylinder design. L-shaped
push arms give you an advantage over diagonal brace designs
by bringing the blade closer to the machine. This gives you
better balance, stability, maneuverability and blade penetration.
BladesSemi-Universal, Universal, Straight and Angle blades are
designed with a strong box section to stand up to the most
severe applications. Heavy moldboard construction, hardened
bolt-on cutting edges and end bits add strength and durability.
Dual Tilt option is available on S/SU/U blades for more productive
dozing. Specialty blades are also available for waste, coal
and wood chip applications.
UndercarriageThe D7E undercarriage is designed for performance in a wide
range of applications. Enhanced visibility, especially to the
sides, is only one of the many benefi ts of this highly effi cient
undercarriage system. D10-size sprocket bearings offer added
durability. Shock loads are directed through the roller frame to
reduce wear and tear on the machine – and on the operator.
The Heavy Duty undercarriage components are designed for
extended wear life in abrasive conditions and rocky or uneven
terrain. Choose a Standard arrangement for versatility in a
variety of soil conditions, or the Low Ground Pressure (LGP)
confi guration with increased track contact area for improved
stability and excellent fl otation in soft ground conditions.
Rear ImplementsTo help you match your dozer to the task at hand, you can
outfi t your D7E with a multi-shank ripper, winch, drawbar
or rear counterweight.
Ask your Cat dealer for available options to help you optimize
your machine for the work you do.
Equipped for the JobOptimize your machine
11
The D7E is especially popular in Waste and Stockpile applications because of its maneuverability and demonstrated fuel effi ciency
advantages. Equip your purpose-built machine from the factory to handle the unique challenges of landfi ll, coal and wood chip work.
Special blades and track shoe offerings let you optimize the machine for the job.
D7E WH LGP Waste Handler• Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
• Purpose-built heavy duty fi nal drive guarding help prevent wire, cables, rope and debris from wrapping into the fi nal drive seals.
• Heavy duty sealed bottom guards protect the engine and power train system.
• Reversing fan and single plane cooling cores with 6 fi ns per inch are ideal for high debris environments. Easy access clean out.
• Insulated Clean Emissions Module for thermal protection.
• Lights are mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.
• Specialized air handling features help deliver cleaner air to the machine and to the cab.
D7E Stockpile• Specialized guarding and seals help protect the machine from damage and debris build-up.
• Single-plane cooling package for cooling effi ciency, reduced plugging and easier clean-out. Hydraulic demand fan offers
effi cient cooling and reverses to reject debris.
• Insulated Clean Emissions Module and thermal shields.
• Additional features like a turbine precleaner and roof-mounted fi lter help protect both the machine and the operator in high
debris conditions.
Special ArrangementsPurpose-built for performance
12
Serviceability and Customer SupportWhen uptime counts
Ease of ServiceThe D7E redefi nes serviceability. With easy access to service points, fewer moving parts
and longer service intervals, the D7E can signifi cantly reduce total owning and operating
costs. A tilt cab allows easy access to modular major components, such as generator,
propulsion module, power electronics and hydraulics. The heating, ventilation and air
conditioning (HVAC) system is self contained for improved performance, increased
service intervals and ease of serviceability.
Service points are grouped on the left side of the machine for quick and easy routine
maintenance. Ground-level sight gauges let you inspect fl uid levels at a glance. Modular fi nal
drives can be easily accessed for maintenance. The optional high-speed oil change attachment
can help make servicing even faster. And for quick undercarriage cleanouts on the go,
a new shovel mounting bracket has been added to the back of the machine.
Ground Level Service CenterYou can reach the ground level service center on the left fender without setting foot on
the machine, giving easy access to the battery disconnect, hour meter, remote engine
shutdown and access light switches. It also houses an LED warning indicator showing
that the power train and accessory systems are energized. When the systems are
de-energized and safe for maintenance, the indicator turns off.
Cat EMSolutions (Equipment Management Solutions)EMSolutions lets you take control of your fl eet with a solution
specifi c to your equipment management needs. Comprehensive,
technology-enabled equipment management – combined with the
knowledge and expertise of your Cat dealer – can provide ways
to help you achieve gains that go straight to your bottom line.
• Improve availability
• Reduce owning and operating costs
• Streamline maintenance practices
• Maximize equipment life
• Increase resale value
Consisting of fi ve levels of support, from remote access to
equipment data to complete, proactive management of your
fl eet, EMSolutions allows you to choose the amount of support
that’s right for you.
Renowned Cat Dealer SupportKnowledgeable Cat dealers have a global reputation for providing outstanding
sales and service. Maximize your equipment investment with a Customer Support
Agreement tailored to meet your business needs. Take advantage of preventive
maintenance programs like Custom Track Service, Scheduled Oil Sampling (S·O·SSM)
analysis, and guaranteed maintenance contracts. Cat dealers can even help you
with operator training to help boost your profi ts.
When you need repairs, Cat dealers and our unmatched Caterpillar distribution
network excel at getting you the right parts you need quickly. Many times the right
part is a genuine Cat Reman part. Remanufactured parts offer you the same warranty
and reliability as new parts at a fraction of the cost. The breadth of the Reman offering
ensures cost effective repairs or rebuilds of your engine and hydraulic components
on the D7E. Rebuilt electric drive components such as the APC and Inverter are also
currently available with additional options in the works. Caterpillar strives to provide
customers the lowest owning and operating costs over the life of their machine.
13
14
SafetyDesigned with protection in mind
SustainabilityBuilt for the next generation
• New pull-down ladder provides convenient access for fueling and to the back
of the machine.
• New seat belt indicator registers a fault code through Product Link if the
operator fails to buckle up, helping to improve your job site safety.
• Center-post cab with angled doors offers excellent visibility to help operators
work more safely.
• Rear vision camera is available to enhance visibility behind the machine.
• Standard Operator Presence detection system allows the machine to idle when
the operator is not seated, but locks out the power train and front implements
to avoid unintentional movement.
• Convenient steps and handles help you get on and off the tractor with greater
ease. Access lighting can be turned on from a ground level switch.
• Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission
standards.
• Up to 30 percent more fuel effi cient than the D7R2. Effi cient
use of Diesel Exhaust Fluid (DEF) gives you excellent overall
fl uid effi ciency.
• In the fi rst four years of production, D7E customers saved
more than 13.25 million liters (3.5 million gallons) of diesel
fuel compared to the D7R2. Signifi cant fuel savings means
reduced emissions and lower costs.
• The D7E earned a 2009 Clean Air Excellence Award from the
U.S. Environmental Protection Agency.
• Major components are built to be rebuilt, reducing waste
and saving you money by giving your dozer a second – and
even third – life.
15
D7E Track-Type Tractor Specifications
Engine
Engine Model Cat C9.3 ACERT
Global Emissions Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)
Engine Power (Maximum)
SAE J1995 201 kW 270 hp
ISO 14396 198 kW 266 hp
ISO 14396 (DIN) 270 hp
Net Power (Rated)
ISO 9249/SAE J1349 178 kW 238 hp
ISO 9249/SAE J1349 (DIN) 241 hp
Net Power (Maximum)
ISO 9249/SAE J1349 187 kW 251 hp
ISO 9249/SAE J1349 (DIN) 254 hp
Bore 115 mm 4.5 in
Stroke 149 mm 5.9 in
Displacement 9.3 L 567 in3
• Maximum Engine Power at 1,600 rpm, Rated Net Power at 1,700 rpm, Maximum Net Power at 1,450 rpm.
• Net power advertised is the power available at the fl ywheel when engine is equipped with fan, air cleaner, and muffl er.
• No derating required up to 3200 m (10,500 ft) altitude, beyond 3200 m (10,500 ft) automatic derating occurs.
• All non road Tier 4 Interim and Final, Stage IIIB and IV, and Japan 2011 and 2014 (Tier 4 Interim and Tier 4 Final) diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specifi cation (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifi cation are required. Consult your OMM for further machine specifi c fuel recommendations.
• DEF used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Service Refill Capacities
Fuel Tank 409 L 108 gal
DEF Tank 17.5 L 4.6 gal
Cooling System 87 L 22.5 gal
Engine Crankcase 30 L 8 gal
Power Train 60 L 16 gal
Final Drives (each) 28 L 7 gal
Final Drive (LGP each) 34 L 9 gal
Pivot Shaft Compartment 7 L 1.8 gal
Hydraulic Tank 76 L 20 gal
Weights
Shipping Weight 21 955 kg 48,402 lb
Operating Weight – STD SU 26 055 kg 57,441 lb
Operating Weight – LGP S 28 525 kg 62,886 lb
Shipping Weight – LGP 24 335 kg 53,649 lb
• Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track and 10% fuel.
• Operating Weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
Hydraulic Controls – Pump
Pump Output – Steering 312 L/min 82.4 gal/min
Pump Output – Implement 200 L/min 52.8 gal/min
Lift Cylinder Flow 200 L/min 52.8 gal/min
Ripper Cylinder Flow 200 L/min 52.8 gal/min
Pump Type Piston, Variable Displacement
Tilt Cylinder Flow – Head End Flow 93 L/min 24.6 gal/min
Tilt Cylinder Flow – Rod End Flow 66 L/min 17.4 gal/min
Hydraulic Controls – Main Relief Valve
Pressure Setting – Steering 27 600 kPa 4,000 psi
• Rated Implement Pump Speed 2,000 rpm.• Rated Steering Pump Speed 2,500 rpm.
Hydraulic Controls – Maximum Operating Pressure
Bulldozer 27 600 kPa 4,000 psi
Tilt Cylinder 27 600 kPa 4,000 psi
Ripper (Lift) 27 600 kPa 4,000 psi
Ripper (Pitch) 27 600 kPa 4,000 psi
Steering 41 000 kPa 5,950 psi
16
D7E Track-Type Tractor Specifications
Ripper
Type Multi-Shank
Number of Pockets 3
Overall Beam Width 2088 mm 82.2 in
Beam Cross Section 355 mm 14.0 in
Maximum Clearance Raised (under tip, pinned in bottom hole)
588 mm 23.1 in
Maximum Penetration 650 mm 25.6 in
Maximum Penetration Force 87.4 kN 19,639 lbf
Pryout Force 234.4 kN 52,695 lbf
Weight – with One Shank 1650 kg 3,572 lb
Each Additional Shank 150 kg 330 lb
Ramp Angle 26 Degrees
Pocket Spacing 900 mm 35.4 in
Shank Gauge 1800 mm 70.9 in
Shank Section 72 mm × 228 mm
2.8 in × 9.0 in
Winch
Winch Model PA90
Weight* 1520 kg 3,350 lb
Oil Capacity 12 L 3.2 gal
Winch and Bracket Length 1115 mm 93.9 in
Winch Case Length 1110 mm 43.7 in
Winch Case Width 826 mm 32.5 in
Increased Tractor Length – STD 1032 mm 93.9 in
Increased Tractor Length – LGP 1032 mm 93.9 in
Drum Diameter 318 mm 12.5 in
Drum Width 226 mm 8.9 in
Flange Diameter 610 mm 24 in
Drum Capacity – 24 mm (1 in) 62 m 203 ft
Drum Capacity – 29 mm (1.13 in) 56 m 185 ft
Ferrule Size (O.D. × Length) 60 mm × 65 mm
2.38 in × 2.56 in
Winch Drive Hydraulic
Control Electronic/Hydraulic
Installed Weight 1520 kg 3,350 lb
Winch Length 1115 mm 43.9 in
Overall Width 1090 mm 43 in
Throat Clearance 218 mm 8.6 in
Rope Diameter (recommended) 25 mm 1 in
Cable Ferrule Size (O.D. × Length) 60 mm × 65 mm
2.38 in × 2.56 in
Maximum Bare Drum Line Pull 400.3 kN 90,000 lbf
Maximum Bare Drum Line Speed 21 m/min 70 ft/min
Maximum Full Drum Line Pull 253.5 kN 57,000 lbf
Maximum Full Drum Line Speed 35 m/min 116 ft/min
* Basic winch weight, mounting arrangement, hydraulic and electrical system weight.
Standards
ROPS/FOPS • Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
• Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II
Brakes • Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008
Cab ANSI/SAE J1166 OCT98
• The declared dynamic operator sound pressure level is 75 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
• Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment.
• The declared exterior sound power level is 110 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specifi ed in “ISO 6395:2008.” The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
• The whole body vibration information is available in HEGQ3339 “Driving Down Vibration” available from your local Cat dealer. The hand/arm vibration of this machine is below 2.5 m/sec2 (8.2 ft/sec2).
Drive Train
Type Electric Drive
AC Compressor Nominal Input Voltage
320 Volts
AC Compressor Maximum Input Current
12 Amps
AC Generator and Propulsion Module Voltage
480 Volts
• Nominal current dependent on heat/humidity loading on HVAC unit.
D7E Track-Type Tractor Specifications
17
DimensionsAll dimensions are approximate
STD LGP
1 Track Gauge 1981 mm 78 in 2286 mm 90 in
2 Width of Tractor over Trunnions 2880 mm 113 in 3423 mm 135 in
Width of Tractor without Trunnions (std. shoes) 2591 mm 102 in 3200 mm 126 in
3 Machine Height from Tip of Grouser
Top of Stack 3365 mm 132 in 3365 mm 132 in
Top of Standard Cab 3392 mm 134 in 3392 mm 134 in
From Ground Face of Shoe 3322 mm 131 in 3322 mm 131 in
4 Length of Track on Ground 3016 mm 119 in 3450 mm 136 in
5 Length of Basic Tractor 4608 mm 181 in 4608 mm 181 in
With the following attachments add to basic tractor length:
Ripper (with tip at ground line) 1391 mm 55 in N/A
Ripper (with tip fully raised) 1222 mm 48 in N/A
Winch 1032 mm 41 in 1032 mm 41 in
Drawbar 270 mm 10.6 in 270 mm 10.6 in
S Blade 977 mm 38 in N/A
SU Blade 1187 mm 47 in N/A
U Blade 1425 mm 56 in N/A
A Blade – Straight 1230 mm 48 in 1230 mm 48 in
A Blade – Angled 25° 964 mm 36 in 964 mm 36 in
6 Height of Grouser 70 mm 2.75 in 70 mm 2.75 in
7 Ground Clearance 472 mm 18.6 in 472 mm 18.6 in
Ground Contact Area (std. shoes) 3.68 m2 5,698 in2 6.31 m2 9,792 in2
Number of Shoes per Side 40 44
Standard Shoe Width (Moderate Service) 610 mm 24 in 915 mm 36 in
Ground Pressure 69.5 kPa 10.1 psi 44.3 kPa 6.4 psi
Pitch 215.9 mm 8.5 in 215.9 mm 8.5 in
Track Rollers/Side 7 8
Number of Carrier Rollers 2 2
8 Drawbar Height (grouser tip to center of clevis) 719 mm 28 in 719 mm 28 in
1
2
7
3
8
4
5
6
18
D7E Track-Type Tractor Specifications
Bulldozer Specifications
Blade 7A
7S 7SU 7U Straight Angled 25° 7S LGP
Blade Capacity (SAE J1265) m3 5.16 6.86 8.34 5.15 — 5.89
yd3 6.75 8.98 10.91 6.74 — 7.7
Width (over end bits) mm 3904 3713 3988 4503 4120 4545
ft 12.81 12.18 13.08 14.77 13.52 14.91
Height mm 1363 1524 1553 1373 1373 1343
ft 4.5 5 5.1 4.5 4.5 4.4
Digging Depth mm 586 586 586 711 711 644
in 23.1 23.1 23.1 28 28 25.4
Ground Clearance mm 1108 1108 1108 1120 1120 1264
in 43.6 43.6 43.6 44.1 44.1 49.8
Maximum Tilt mm 1045 987 1085 695 695 785
in 41.1 38.9 42.7 27.4 27.4 30.9
Weight* kg 3504 3832 3806 3790 3790 3970
lb 7,709 8,431 8,373 8,330 8,330 8,734
Weight with Dual Tilt kg 3563 3891 3865 — — 4029
lb 7,839 8,561 8,503 — — 8,864
*Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, and cylinder lines (Tilt).
Undercarriage
Type Heavy Duty Undercarriage
Configuration STD LGP
Number of Rollers (each side) 7 8
Number of Shoes (each side) 40 44
Pitch 216 mm 8.5 in 216 mm 8.5 in
Shoe Width 610 mm 24 in 915 mm 36 in
Grouser Height (MS) 70 mm 2.75 in 70 mm 2.75 in
Length of Track on Ground (Heavy Duty) 3016 mm 119 in 3450 mm 136 in
Track Gauge 1981 mm 78 in 2286 mm 90 in
Ground Contact Area (Heavy Duty) 3.68 m2 5,698 in2 6.31 m2 9,792 in2
Ground Pressure (Heavy Duty) – ISO 16754 69.5 kPa 10.1 psi 44.3 kPa 6.4 psi
Ground Clearance 472 mm 18.6 in 472 mm 18.6 in
D7E Standard Equipment
19
POWER TRAIN
• Aftercooler, Air to Air• Air Cleaner, Precleaner with Strata• Tube Dust Ejector• C9.3 ACERT Engine
– Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) – Certifi ed Engine with Aftertreatment
• Coolant, Extended Life• Differential Steering• Ecology Drains (Engine Oil, Coolant,
Hydraulic Oil, Fuel Tank, Power Train Case)• Electronic Air Cleaner Service Indicator• Fan, Hydraulically Driven Demand• Final Drives, Double Reduction• Generator, AC• Parking Brake• Power Inverter• Propulsion Module, Transmission,
Continuously Variable• Prescreener• Radiator, Core, Aluminum Bar Plate• Separate Circuit Core, Aluminum Bar Plate• Starting Aid, Ether• Transmission, Continuously Variable• Turbocharger, Wastegated• Water Separator, Primary Fuel Filter
UNDERCARRIAGE
• Guards, End Track Guiding• Heavy Duty Track
(610 mm/24" Moderate Service)• Master Link• Rollers and Idlers, Lifetime Lubricated• Sprocket Rim Segments, Replaceable• Track Adjusters, Gas Spring Recoil• Undercarriage, Heavy Duty
ELECTRICAL
• Accessory Power Converter (APC)• Alarm, Backup• Batteries, Maintenance Free (1,000 CCA)• Converter, 24V to 12V, 10 Amp• Heater, Engine Coolant, 120V• Horn, Forward Warning• Starter, Heavy Duty
OPERATOR ENVIRONMENT
• Armrest, Adjustable• Bidirectional Shift Switch• CB Ready• Cab, Center Post, Integral ROPS/FOPS• Continuously Variable Speed Control• Controls, Electro-Hydraulic, Pilot• Operated with Electronic Deactivation Switch• Foot Supports, Dash• Hour Meter, Electronic• Machine Isolation• Mirror, Rearview• Modular HVAC, Cab Mounted• Monitoring System, Electronic, with
Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions
• Operator Presence• Pedal, Travel Control• Radio Ready, 12V• Seat Belt, Retractable, 76 mm (3 in)• Seat, Cloth, Air Suspension• Speed Recall Button• Throttle Dial, Electronic with Eco Reverse• Wipers, Intermittent
OTHER STANDARD EQUIPMENT
• CD ROM Parts Book• Cab, Tilt• Engine Enclosures, Perforated• Front Tow Hook• Ground Level Hour Meter• Ground Level Engine Shutdown• Guards, Hinged Bottom• Guard, Final Drive Flange• Hood, Perforated• Hydraulics, Load Sensing, Dozer Lift
and Tilt• Oil Cooler, Hydraulic• Oil Cooler, Power Train• Product Link• Radiator Doors, Louvered, Double Hinged• Screen, Grill Door Fan• S·O·S Sampling Ports• Vandalism Protection for Fluid
Compartments and Battery Box
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
20
D7E Optional Equipment
POWER TRAIN
• Final Drive – Cold Weather (STD, LGP) – Clamshell (STD, LGP)
• Engine – Sound Suppressed, Basic – Thermal Shield – Sound Suppressed and Thermal Shield
• High Speed Oil Change System• Precleaner, with Screen• Fuel Group, Heater• Fast Fill Fuel System• Heavy Duty Battery• Cold Weather Fluids• Arctic Engine Coolant (–51° C/–60° F)
UNDERCARRIAGE
• Track – 610 mm (24 in)• Extreme Service• Extreme Service Rotating Bushing Track• Moderate Service• Moderate Service Rotating Bushing Track• Extreme Service Trapezoidal• Moderate Service Trapezoidal – 660 mm (26 in)• Extreme Service• Moderate Service• Extreme Service Trapezoidal – 915 mm (36 in)• Extreme Service• Extreme Service Trapezoidal• Self Cleaning
• Undercarriage (STD, LGP) – MS Guide – Full Guide – Guarded – Arctic
ELECTRICAL
• Lights – Basic – Premium – Premium, Rear Screen – Sweeps – Sweeps, Rear Screen
• Converter, 24V to 12V• Receptacle, Jump Start• Strobe Light Warning
OPERATOR ENVIRONMENT
• Enhanced Cab Air Cleaner, Roof Mounted• Heated Seat• Heated and Ventilated Seat• Sliding Rear Window• Single Camera Visibility Arrangement
GUARDING
• Fast Fuel• Lights
– Basic – Premium – Screen
• Fuel Tank• Fuel Tank, Waste• Bottom, Sealed• Screen
– Rear – Rear and Side – Screen or Sweeps Ready
• Sweeps• Door
– Screen – Half Screen
• Final Drive Flange
BLADES
• Single Tilt or Single Tilt Guarded (STD, LGP)
• Dual Tilt or Dual Tilt Guarded (STD, LGP)
• S (Straight) • S LGP Landfi ll• SU (Semi-Universal)• U (Universal)• A (Angle)• SU Wear Plate • SU Rock Guard and Wear Plate
TECHNOLOGY
• Installation, AccuGrade Ready• Mounting, AccuGrade Receivers
(STD, LGP)
HYDRAULICS
• Hydraulics, Dual Tilt• Auto Reversing Hydraulic Fan• Hydraulic Implement Towing Arrangement• Hydraulics, Ripper• PA90 Winch, Variable Speed
ATTACHMENTS
• Ladder Group – Standard – Waste
• Multi Shank Ripper• Drawbar, Rigid• Ripper with Striker Bar• Counterweight Box, Rear• Striker Bar, Box• Additional Ripper Tooth
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
21
Notes
22
Notes
23
Notes
AEHQ7327 (08-2014)(North America, Europe,
ANZ, Japan)
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2014 Caterpillar
All rights reserved
Materials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.