lacal test manual

7/29/2019 Lacal Test Manual

1/25

1

Guanri Repeater

Repeater Local Test

User Manual

Guanri Telecom-Tech(Shenzhen) Co., Ltd.3/F, Building R3-B, High Technology Industrial Park,

Shenzhen, China

Tel: 86-755-26520688

Fax: 86-755-26520869


2/25

2

1 Connect the computer to theMonitor Port of the Monitor Board

with a serial cable.

2 Open the Repeater Test software

on the computer.

3 Select the correct COM Number.


3/25

3

PLL Setup (Generally, we need not to change the default values which have

been set correctly according to the specified repeater by the testing engineers

in the Guanri manufacture center.):

Operation Steps:

Repeater Operation-PLL Set (the password is: hwthwt)


4/25

4

Notes: Firstly, we must select the correct repeater type. In thewindow above,64 stands for the 200KHz frequency adjusting step.


5/25

5

5 Parameters Setup

Repeater Operation-Parameters Setup


6/25

6

Then display this dialog


7/25

7

Frequency Parameters Setup

Firstly, select the correct repeater type in the selective frame(displayed in blue in the window above).Secondly, set specified working channels(or working channels and shift

channels).


8/25

8

UL/DL PA switch states and Attenuation Setup

Click on Other Parameters Setup, the window below will appear.


9/25

9

Communications Parameters Setup

Click on Communications Parameters. See the window below.Set correct Numbers of the center station and select the correct

communication mode.


10/25

10

display the Output powers

Firstly, check the real-time value of the output power:


11/25

11

So the window below will be displayed on the computer


12/25

12

Then the window below will be displayed on the computer

From the window, we can get all the values and the states displayed:

Especially DL/UL PA Power show we the signal output power of the repeater. If the output

power is not ideal, we can set the UL and UL Attenuation whose maximum values both are 31 dB

to change the output power. Take note that if you adjust the DL Attenuation, you need to adjust

the UL Attenuation too for keeping the balance.


13/25

13

Check the alarm states


14/25

14

Firstly, enable all alarms switch


15/25

15

Then, check the alarms states

Operations: Parameters Query-Alarms Query


16/25

16

Then the alarm status window display


17/25

17

And we can adjust some alarm thresholds to change some alarm states.

Operations: Repeater Operation-Parameters Setup-Alarm Threshold Setup


18/25

18

We can Query the real-time parameters of the repeater

Firstly select Parameters Query Real_time Parameters Query


19/25

19

Then display the Real-time Parameters Query window


20/25

20

And we can adjust some alarm thresholds to change some alarm states.

Operations: Repeater Operation-Parameters Setup-Alarm Threshold

Setup


21/25

21

Adjust the analog values adjustment to change the values

displayed in the following window


22/25

22

Adjust the values adjustment

Operations: Repeater Operation-Analogs Value Adjusting

Notes: Forward Adjust

means making the

relating values

becoming bigger just in

displaying, but it cant

change the realworking values. And

Reverse Adjust means

making the relating

values less in displaying.


23/25

23

There are some information which has been set as

default of the repeater in the software, we need not

to change them because they do not effect the

working states of the repeater.

After all the parameters have been set correctly, the

repeater can work normally.


24/25

24

ServiceYour satisfaction is our priority. Offering a quick and

effective technical support, we always put the customer first.

Please dont hesitate to contact us by the following ways if you

have any questions.

Guanri Telecom-Tech(Shenzhen) Co., Ltd.Address: 3/F, Building R3-B, High-Tech Industrial Park,

Shenzhen, P.R.C.

Post code: 518057

Tel.: 86-755-26712354, 26520688

Fax: 86-755-26548582

E-mail: [email protected]

Website: http://www.guanri.com.cn
mailto:[email protected]://www.guanri.com.cn/http://www.guanri.com.cn/mailto:[email protected]


25/25

25

Thank You!

lacal test manual

Documents