laboratory & sterilization technology

FN SERIESDry Heat Sterilizers /Ovens

• Designed for the dry heat sterilization in medical, dentistry and veterinary applications

• Suitable for drying, warming and heating, heat treatment and long term stability tests in research and industrial laboratories

• Air jacketed heating system for highly precise and constant temperatures

• Very homogeneous temperature distribution by natural air convection

• Triple insulation consisting of glass wool, aluminium layer and air gap for high efficiency

• Stainless steel chamber which has high resistance to most of the chemicals

• The door, pressing firmly and tightly on the chamber gasket to reduce temperature loss

• Adjustable outlet port for vapour exhaustion

• User friendly, programmable, reliable, accurate PID microprocessor control system

• Programmable delayed start function

• Highly visible dual displays for temperature and time

• Adjustable independent safety thermostat which takes over control in case of any failure

FN SERIESDry Heat Sterilizers /Ovens

• Designed for the dry heat sterilization in medical, dentistry and veterinary applications

• Suitable for drying, warming and heating, heat treatment and long term stability tests in research and industrial laboratories

• Very homogeneous temperature distribution by natural air convection for FN 300/400/500 and by forced air ventilation for FN 400P/500P

• Anodic-oxidated aluminium chamber for FN 300/400/500 and stainless steel chamber for FN 400P/500P

• The door, pressing firmly and tightly on the chamber gasket to reduce temperature loss

• Adjustable outlet port for vapour exhaustion

• User friendly, programmable, reliable, accurate PID microprocessor control system

• Programmable delayed start function

• Highly visible dual displays for temperature and time

• Adjustable independent safety thermostat which takes over control in case of any failure

KD SERIESOvens

• Suitable for drying, warming and heating, heat treatment and long term stability tests in research and industrial laboratories

• Very homogeneous temperature distribution by forced air ventilation

• Extraction fan for faster drying

• High grade insulation for efficient heating and temperature stability

• Stainless steel chamber which has high resistance to most of the chemicals

• The door, pressing firmly and tightly on the chamber gasket to reduce temperature loss

• Adjustable outlet port for vapour exhaustion

• User friendly, programmable, reliable, accurate PID microprocessor control system

• Programmable delayed start function

• Highly visible dual displays for temperature and time

• Adjustable independent safety thermostat which takes over control in case of any failure

MF SERIESMuffle Furnace

MF Series General Purpose Furnaces have maximum operating temperatures of 1100°C, 1200°C and 1300°C and can be used for a wide range of applications in many different sectors such as metal, ceramic and food industry, jewelry and dentistry. Their perfect design is ideal for;

- Ashing organic and inorganic samples

- Firing and sintering of ceramics, stoneware and porcelain

- Melting, annealing, hardening, tempering, stress relieving and heat treatments of ferrous and non-ferrous metals

- Thermal aging

- Chemical decomposition

- Thermal shock testing

- High temperature tests of components or fishing products

The chamber of MF Series Furnaces is made of vacuumed fiber board and refactory bricks. Refactory bricks are used for the bottom of the chamber and at the front of the chamber since those surfaces are subjected to more chemical and mechanical effects. Heating elements are coiled around the ceramic tubes and placed on the two sides of the chamber to ensure very good temperature uniformity and fast heating. Another avantage is the assembly system of the heaters which is very easy and economic to replace of the heaters in case of the failure.

By means of the high grade insulation made of fiber board, very good temperature homogeneity is obtained in the chamber. In addition to the insulation, double enveloped design with air gap between insulated chamber and the outer body keeps the outer body at low temperatures.

Counter balanced lid is opened upwards and keeps the hot surface of the lid away from the operator for safe and easy loading and unloading. As another safety feature, there is a switch which cuts off the power of the heaters when lid is opened.

The chimney for discharging the vapors occurring during the operation is offered as standard.

MF Series Furnaces are equipped with PID microprocessor control system which has temperature displays for actual and set temperatures. The control system gives an alarm in case of temperature sensor failure and stops heating if temperature exceeds the maximum set temperatures of the furnace.

Depending on the different performance needs, two more control systems are offered as option: Control systems with two steps and six steps. While it is possible to program only one heating ramp and one dwell for control system with two steps, it is possible to program totally six steps including heating ramps and dwells for control system with six steps. Those optional control systems have 3600 minute timer for each step and delayed start timer can be programmed up to 3600 minutes as well.

The Right Choice for the Right Results

Nüve, which was founded in 1968, is one of the leading and outstanding manufacturers ofTurkey in the field of laboratory and sterilization technology.

Since its foundation, Nüve had contributed to the advancement of its products and production processes by means of technical innovations and investments made for research and development.

With a network of 30 distributors in Turkey, Nüve holds the major part of the Turkish market. Strong international focusing; formulated, fast, economic solutions combined with continually evolving quality awareness and customer oriented services form a significant part of Nüve’s business concept. Because of these special features, Nüve has become a fast growing company among its competitors. Having ISO 9001:2008 and ISO 13485:2012 certificates, Nüve is exporting to more than 100 countries by the contribution of its professional work force and very competitive quality and price.

The manufacturing plant is 30 km away from Ankara, the capital city of Turkey and consists of 6000 m2 closed area. High technology machine tools and sheet metal working machines are used for standard production. The quality of the raw materials and parts supplied plays an important role in obtaining a stable production of high quality products.

The product range of Nüve is expanding every year proportional with its continuous research studies. Subject to ever-changing customer perceptions and worldwide technological improvements, also the development of products never ends at Nüve.

The equipment that Nüve manufacture are mostly used in all kinds of medical laboratories, biotechnology, research and quality control laboratories of agriculture, botany and veterinary as well as in the quality control laboratories of various industries such as food, beverage, dairy, chemicals and pharmaceuticals.

With its flexible mass production technology, fast delivery process, well established network ofnational and international distributors, quick and efficient after sales services and unlimited spare part supply, Nüve is ready to meet the needs and demands of its customers all times and just in time.

NÜVE SANAYİ MALZEMELERİ İMALAT VE TİCARET A.Ş.

nuve.com.tr sales@nuve.com.tr

Saracalar Mah. Saracalar Kümeevleri No: 4/2 Akyurt 06750 ANKARA / TURKEY t. +90 312 399 28 30 f. +90 312 399 21 97 10

.201

7/Z1

5.K

34 0

02