PERSONAL DETAILS

Surname : NaickerFirst Name/s : KrubeshenDate of Birth : 17 May 1971I.D. Number : 710517 5093 087Gender : MaleMarital Status : MarriedNationality : South AfricanDependent’s : ThreeHome Language : EnglishOther Languages : Afrikaans Health : ExcellentHome Address : 62 Asteria Road Larnaco Etstae Old Main Road Illovo Beach Durban South South Africa

Hobbies : Volleyball, Fishing, Stainless Balustrades.

Criminal Offences : NoneContact Numbers : +27 82 9799 777 Email Address : kruben.naicker@gmail.com

TERTIARY QUALIFICATIONS

Name of Institution : South African Institute of WeldingQualification : Welding and Fabrication Inspectors – Level 1

Senior Welding Inspector – Level 2 Competent Persons Pressure Vessels (Course Passed)

Busy Obtaining Vessel Inspections for CP Number

Name of Institution : CSWIPQualification : International Senior Welding Inspector 3.2 With RT Interpretation

Name of Institution : SasolQualification : 16.2 Appointed

Boilers Course, Emergency Procedure Courses, Forklift Trained, Risk Assessment Evaluation Course & Afrox Safety Training Course.

Name of Institution : Petro SAQualification : (AUT) Automatic Ultrasonic Testing Data Interpretation (Course Attended In Netherlands, Rotterdam).

Off –Shore Survival Course (Requires Renewal)

Curriculum Vitae of

Krubeshen Naicker

EMPLOYMENT HISTORY

Company : Sasol II Secunda Shut DownPosition : Representing Sasol as Welding Services Area ManagerDuration : August 2016 to September 2016 ( Project Complete) Projects : Area Manager for the following areas Unit 001,003,009,010, 010V & 012 Managed all Sasol Welding Specialists Daily Activities, NDT Subcontractors and Subcontracting Inspectors Attended all Senior meetings regarding the Shut Down Progress on a Daily bases to provide Feedback and support.

Company : TFM (DRC) Democratic Republic Of CongoPosition : Client QA/QC Supervisor Duration : July 2015 to February 2016 ( Project Complete) Projects : AP 2 Project over seeing off all subcontractors working on site with regards to all new fabricated Vessels, Tanks, Heat Exchangers and Piping, Managing all Quality Related Activities on Site

Company : Elgin Engineering Position : QA / QC ManagerDuration : November 2013 to July 2015 Projects : New and Repair Fabrications of Heat Exchangers, Pressure Vessels, Tanks and Structural Steel Works For the following Companies = Eskom Power Stations, Sasol, Engen, Sapref, Petro SA, Shell Refineries (Oil & Gas)Duties and Responsibilities : Administrative Responsibilities

Responsible for profit and loss Responsible for execution excellence Responsible to coordinate and supervise NDT Manage all service providers Attend project Management meetings Liaise with Clients, suppliers and contractors on Quality

matters Interface with team members and Client representatives Time Management Develop QC Packs in accordance with code and client

specification requirements and manage right up to Clinet handover

Place holds on any defective work until corrected or concession granted

Issue NCR”s for all deviations from company, code or Client specifications

Attend meetings internal and external Collect Statutory and other certification

Ensure all job related documentation are signed on and off at the appropriate stages

Record all work packs and ensure QCP”s are signed linked to these packages with unique sequence and numbers

Perform Audits and maintain Audit reports Ensure receiving inspection documentation is controlled Develop and maintain systems related to Quality ( Files for

material certificates, consumable certificates, Welders Qualifications, Welder Updates, NCR”s, Concessions etc)

Report trends related to poor Quality Ensure all drawings are traceable as per internal

requirements Report on outstanding Supplier / Contractors performance

related to Quality Coordinate QC activities Review Supplier / Contractors documentation and Data

Books for acceptability Manage all QC Inspectors and QC Clerks Eliminate all client concerns and attend to all client NCR”s

issued and implement corrective actions Draw up Quality Control Plans for pressure piping,

Mechanical equipment Tanks etc Review and approve all Subcontractor’s QCP”s &

Procedures Technical Responsibilities Familiarize with Departmental and Company Procedures,

plant processes, project requirements and standards Study order packages and discuss with suppliers to ensure

agreements on inspection requirements Perform inspections at control points specific to supplier

approved Quality Control Plans to verify product conformance to client specifications and manufacturing codes

Report objectively and accurately on inspection findings Provide technical input into failure investigations and

product Audits

Company : Group Five (Oil and Gas) Position : QA/QC ManagerDuration : November 2011 to November 2013Project : Transnet/NMPP Terminals Project TM1 Estimated R 1 Billion Rand Project

Duties and Responsibilities : Responsible for execution excellence Responsible to coordinate and supervise NDT Manage all service providers Attend project Management meetings Liaise with Clients, suppliers and contractors on Quality

matters

Interface with team members and Client representatives Time Management Develop QC Packs in accordance with code and client

specification requirements and manage right up to Clinet handover

Place holds on any defective work until corrected or concession granted

Issue NCR”s for all deviations from company, code or Client specifications

Attend meetings internal and external Collect Statutory and other certification Ensure all job related documentation are signed on and off

at the appropriate stages Record all work packs and ensure QCP”s are signed linked

to these packages with unique sequence and numbers Perform Audits and maintain Audit reports Ensure receiving inspection documentation is controlled Develop and maintain systems related to Quality ( Files for

material certificates, consumable certificates, Welders Qualifications, Welder Updates, NCR”s, Concessions etc)

Report trends related to poor Quality Ensure all drawings are traceable as per internal

requirements Report on outstanding Supplier / Contractors performance

related to Quality Coordinate QC activities Review Supplier / Contractors documentation and Data

Books for acceptability Manage all QC Inspectors and QC Clerks Eliminate all client concerns and attend to all client NCR”s

issued and implement corrective actions Draw up Quality Control Plans for pressure piping,

Mechanical equipment Tanks etc Review and approve all Subcontractor’s QCP”s &

Procedures Technical Responsibilities Familiarize with Departmental and Company Procedures,

plant processes, project requirements and standards Study order packages and discuss with suppliers to ensure

agreements on inspection requirements Perform inspections at control points specific to supplier

approved Quality Control Plans to verify product conformance to client specifications and manufacturing codes

Report objectively and accurately on inspection findings Provide technical input into failure investigations and

product Audits

Company : Group Five (Oil and Gas) Position : QA/QC Manager

Duration : July 2010 to November 2011Project : Transnet/NMPP Pump Stations Project PS1 , PS3 & PS5 Estimated R 2.5 Billion Rand Project

Duties and Responsibilities : Attend all technical review meetings to ensure all welding

aspects are covered in the meetings Ensure correct selection of parent materials as per approved

specifications and welded joint propertiesEnsure correct Quality and acceptance of welds as per code

requirementsProviding solutions to all queries with the customer’s approval

by means of raising: Technical Queries, Concessions & Requests For Information via the clients Aconex system.

Attend all Management meetings Ensure all welders are certified to required codes for the

project ASME IX & API 1104 Provide information on location requirements , accessibility Problem solving of material requirements as per B31.4 Coordinate all subcontractors(NDT, Painting, C/S Tanks,

S/S Tanks, Denso, Supports, Material Suppliers etc) Co-ordinate all QC personal Manage 3 x Sites PS1(Amanzimtoti), PS3

(Pietermaritzburg) PS5 (Ladysmith) & Workshop regarding all QA/QC requirements

Review subcontractor documentation & obtain approvals from

Clients Via the clients Aconex system Perform Audits as per the Group Five audit schdule Raise NCR’s were & when required Testing of welders to ASME IX & API 1104 and draw up all

welders certificates Ensure all PQR”S &WPS”s is qualified and meets the

customer’s (NMPP) requirements. Draw up all Quality control plans and obtain client approval etc

Company : Group 5 (Oil And Gas)Position : QA/QC ManagerDuration : November 2008 to JulyProject : Sapref Refinery / Engen RefineryDuties and Responsibilities :

Attend all Management Meetings Review all Radio Graphic Films To Assess Welder

Performance And Obtain Approvals from AIA, Review all Radio Graphs on fabricated and repaired welds and obtain approvals from AIA

Draw up Inspection Test Plans And Quality Control Plans for Vessels, Tankage & Piping And Obtain approvals from clients(Engen/Sapref)

Perform Scheduled Audits In Regard To The Company Quality Management Systems And ISO 9001-2008

Perform Audits On Subcontractors(NDT,PWHT,Welding Contractors)

Review All NDT & PWHT Procedures And Verify Required Approvals

Draw Up Method Statements For Repairs To Vessels And Tanks

Coordinate All NDT & PWHT Related Functions And Personnel

Monthly Tracking Of Welding Performance, Reject Rates. Draw Up And Control Tracking Sheets For Shut Downs

And Maintenance Work Responsible For All QC Inspectors,QC Clarks & Document

Controllers Liaise With AIA And Unit Area Engineer’s Control And Monitor All Registers

NCR,Welders,Calerbrations,WPS & PQR,Materials ETC Plan and Prep for Shut Downs Phase, Pre Fab Phase &

Execution Phase. Etc

Company : SAPREF –Shell (Moody International SA)Position : Plant Integrity InspectorDuration : June 2008 to November 2008 Project : MaintenanceDuties and Responsibilities : Performing of periodic inspections on all Equipment=Vessels, Tanks Piping, Air Heaters, Tube Bundles etc Data capturing inspection reports as per SAPREF data base. Attending all meetings at lube oil plant.

Company : Shell- Moody International SAPosition : Plant Integrity Piping Inspector Duration : June 2007 to June 2008Project : RBI-Risk Base Inspection/CUI-Corrosion under Insulation InspectionsDuties and Responsibilities : Reporting On Pipelines, Pressure Vessels, Heat Exchangers etc

Evaluating Extent of Risks of DefectsReport Writing (As Per Sapref Systems) and API 570 Codes

Company : Abet Inspection Petro-SA (Mossel Bay)Position : Statutory InspectorDuration : May 2007 to June 2007Project : TurnaroundsDuties and Responsibilities : Perform Statutory Inspections on Reactors & Hoppers Report Writing On All Defects Found

Reporting To Plant Mechanical Engineer Writing Out Recommendations for Repairs Performing Inspections as Per QCP

Company : Goss & Balfe Alfes Urainium Plant (Klerksdorp)Position : QC Manager

Duration : January 2007 to May 2007Project : Alfes Uranium MineDuties and Responsibilities : Recruiting Of QC Inspectors (As Per Job Requirements)

Checking On QC SupervisorsAllocating Work to QC InspectorsAchieving Company GoalsLiaising With 3rd Party InspectorsObtaining Concessions Where Not Practical For Pressure TestsSigning Off Complete Work Problem SolvingEtc

Company : Abet Inspection / Petro SA (Mossel Bay)Position : Senior QA / QC InspectorDuration : 2005 to 2006Projects : ExtensionDuties and Responsibilities : Writing Of Quality Control Plans

Performing of InspectionsSigning Of Pipe Repairs and Work Packs as Per QCP

Company : Unit Inspection (Sasol Secunda)Position : QA / QC & Materials InspectorDuration : 2004 to 2005Project : Sasol Boilers 2&3 GO TeamDuties and Responsibilities : Reporting To Sasol Group leader

Checking That Materials Comply With CodesStock Control of MaterialsRequesting Of (PMI) Positive Material IdentificationsStorage and Packing of Materials as Per ASME CodesReceiving and Dispatching Off MaterialsObtaining Of Material Certs and FillingLeasing With SuppliersControlling Of Required Manpower

Company : Hydra Arc Engineering & Fabrication CO (Sasol Secunda)Position : (1) Senior Supervisor (16.2 Appointed)Position : (2) SupervisorPosition : (3) Welder Duration : 1992 to 2004Project : Sasol BoilersDuties and Responsibilities : Liaising With Mechanical Engineer & Group Leaders

Attending All MeetingsRecruiting Of Personal as Per Requirements

Handing Out Work to SupervisorsAchieving Company Dead Lines

Company : Steinmuller Eskom Tutuka Powerplant (Standerton)Position : Apprentice Welder and Coded WelderDuration : 1988 to 1992Experience : Part of the Steinmuller GO Team and worked on the following Power Stations

Tutuka Power Station Kreil Power Station

Matla Power Station Hendrina Power Station Duvha Power Station

I also worked at the Steinmuller work shop that was based in Chamdor building the Boiler walls, burner rings, Sling Tubes, Economizers etc

ADDITIONAL EXPERIENCE

Experienced in various computer programs

Experienced in Boilermaking

Experienced in pipe fitting

Was elected Chairman of the Equity Committee in Sasol for Hydra Arc

Received the Apprentice off the year award for Steinmuller for Welding

Experienced with most codes of construction & repairs

REFERENCES

Company : Sasol SecudaContact Person : Charl DorflingTel No : 0836803234

Company : Elgin Engineering Contact Person : Vincent Chetty (Managing Director)Tel No : Work 031-2740006

Company : G5 Oil & GasContact Person : Gianni Ioppo (Project Manager NMPP/Transnet Project) Tel No : Private +27 (0)829080062 / Work 0767929175 Company : Group Five Oil & GasContact Person : Pravin Laljit (Quality Manager) Tel No : +27 (0) 78 460 3391

Company : SAPREF Contact Person : Jay Padayachee (Quality Manager)Tel No : 031-4801614Cell : 082 8060 311

Company : Moody International SAContact Person : Keith Whitby (Supervisor)Cell No : 083 6149 155

Company : Stainmuller Construction Contact Person : Henry Macrate (Welding Superintendent) Cell No : 082 0638 137

Company : Hydra Arc Engineering and Fabrication (Sasol)Contact Person : Johan Trollip (Sasol Group Leader)Cell No : 082 8000 441

Company : Unit Inspection (Sasol) Contact Person : Johan Trollip (Sasol Group Leader)Cell No : 084 5868 804

Company : Abet Inspection Contact Person : Bill Alexzandera (Director)Office No : 044 8735 437

Company : Goss & Balfe Contact Person : Steven Kurns (QA/QC Manager)Cell No : 082 7777 930

Please note all other certificates to be submitted on request, CSWIP Certificate also up dated and valid