khs - 1 innofill can dvd computer ...publishing.khs.com/khs/public/archive/datenblatt_1390...filler...
TRANSCRIPT
1_INNOFILL CAN DVDCOMPUTER-CONTROLLED CAN FILLER WITH A VOLUMETRIC
FILLING SYSTEM FILLING
The Innofill Can DVD is a computer-controlled can
filler which works according to the volumetric
filling principle. Various beverages: beer,
carbonated soft drinks, juice, still drinks and
tea/coffee can be filled in cans. The DVD is
characterized by utmost flexibility and the filling
system's capabilities for the future. The DVD
achieves filling speeds of up to 120,000 cans/hr
with exact product volume compliance and
minimal loss of product. All of the DVD operations
are automated, all processes are documented and
can be reproduced at any time.
Machine Characteristics
The filling machine is driven by a homocinetic joint
shaft from the main drive of the can seamer. As a
result, a synchronous operating speed is always
ensured in both machines. The configuration of the
filler meets the highest hygienic demands. The filler
can be optionally designed with a slanted filler
table. In addition, the filling machine has
all-around paneling with electrically secured hinged
doors, which enable good accessibility to the
machine. Minimal changeover times to different
can volumes are implemented via input on a
control panel.
Filling Process
Volume filling is independent of the can shape. The
cans reach the filling machine on a single-lane
transportation belt which is driven by the machine.
The cans are brought to machine pitch on the
infeed screw and fed to the machine via an infeed
star. An optimal filling process for differing can
volumes is ensured by storing filling parameters.
High filling accuracy is achieved by measuring
filling volumes with electromagnetic inductive flow
meters (MID).
The filling sequence takes place in several steps.
First of all, the can is slid into place and then it is
sealed. Filling starts after the can has been rinsed
with CO2 and pressurized. When the target
volume to be filled has been achieved, the filling
valve is pneumatically closed by a signal from the
MID. After filling, the can's filling pressure is
discharged in a separate channel and finally it is
released.
2_INNOFILL CAN DVDCOMPUTER-CONTROLLED CAN FILLER WITH A VOLUMETRIC
FILLING SYSTEM FILLING
KHS GmbH
Planiger Strasse 139-14755543 Bad KreuznachGermany
+49 (0) 671 / 8 52-2714Phone:+49 (0) 671 / 8 52-42714Fax:[email protected]:
www.khs.com
Cleaning-Friendly Design
The Innofill Can DVD has a very simple, hygienically
designed structure that ensures the best cleaning
capabilities. The machine can be optionally
equipped with various cleaning devices for external
cleaning, such as hot water flushing and foam
cleaning for various machine areas. For internal CIP
cleaning, the CIP rinsing containers are first
attached to the filling valves. This is done in the
shortest possible time, without the use of tools,
either manually or automatically (as an option).
Technical Data
Contents of can:
0.135 l to 0.5 l (as an option up to 1 l)
Filling temperature:
4 to 18° C
Height:
60 to 200 mm
Diameter:
53 to 73 mm
Filling accuracy:
s = 1.0 ml for can size [0.5 l]
s = 0.9 ml for can size [0.355 l]
DVD filler
Pitch circle (mm)
1600
1920
2166
2622
3078
3534
4104
4674
5244
Filling points
30, 40 or 50
60
76
92
108
124
144
164
184
Capacity (cans/hr)
13,000 to 50,000
27,000 to 60,000
32,000 to 72,000
43,000 to 90,000
51,000 to 99,000
60,000 to 105,000
73,000 to 114,000
80,000 to 120,000
85,000 to 120,000
Edition:9/19/11-en.Subjectto
modification.