kg k 1317788196

8/22/2019 Kg k 1317788196

1/27

TECHNICAL

SUPPORT

SERVICE

RANGE:

PRODUCT:

TECHNICAL STUDY

t e c h n i c a l

Washing machines 7 / 8 / 9 Kg.

Fagor Innovation

Date: 07/09/2006

Document No: 9688

8/22/2019 Kg k 1317788196

2/27

How to use this manual

This document is intended for all persons rendering technical support services (T.S.S.).

It is designed to facilitate the repair of the product described. It provides documentary

support for technical consultations.

This manual contains notes warning about safety issues:

t e c h n i c a l

Copyright by Fagor Electrodomsticos S.Coop. 2006. All rights reserved. The total

or partial reproduction of this document, by any procedure and on any type of media,

is prohibited without written authorisation from the holder of the usage rights. Breach

of this copyright will be pursued in conformity with applicable legislation and may lead

to criminal charges.

FAGOR ELECTRODOMESTICOS reserves the right to introduce, without priornotification, any modifications to the characteristics of its manufactured products.

I

Electr ical hazard: This identifies potential risks for theproduct. Such risks may cause permanent damage to the

product.

Important: This identifies information that is critical for acorrect understanding of the product.

!Warning: This identifies information or circumstances thatmay cause personal injuries or death.

8/22/2019 Kg k 1317788196

3/27

Table of contents

t e c h n i c a l

1.- Warnings and precautions ..................................1

2.- Features ................................................................3

3.- Description of operation .......................................8

3.1.- General description ............................................................ 8

3.1.1.- Component characteristics ....................................................... 8

3.1.2.- V3 and V4 circuit configuration ............................................... 12

3.1.3.- Washing machine vibrations ................................................... 17

3.1.4.- Description of the operation of programme no. 2 ................... 20

3.1.5.- Attempts to spin ....................................................................... 21

3.2.- Drawings and diagrams ................................................... 22

8/22/2019 Kg k 1317788196

4/27

Warnings and precautions

t e c h n i c a l

1

1.- Warnings and precautions

!The washing machine must be connected to an earth. If this basic safety rule is

not respected, the manufacturer shall under no circumstances accept liability for

injuries suffered by persons or for damage to objects.

To prevent fire and electrical sparking hazards, personal injury, or other dam-

age when using your washer, take the following precautions:

This washing machine iis supplied with a manual which includes operating,

maintenance, and installation instructions. Read all the instructions before using thethe washing machine.

Do not wash articles which have been previously cleaned, washed, soaked or treated

with gasoline, dry-cleaning solvents or other inflammable or explosive substances as

they produce vapours that may ignite or explode.

Do not add gasoline, dry-cleaning solvents or other inflammable or explosive

substances to the wash water since they produce vapours which may ignite or

explode.

Do not repair or replace any part of the washer, nor attempt any type of service unless

it has been recommended in the maintenance instructions in the manual.

Do not stand or sit on the machine, or support yourself on the open loading door.

To reduce the risk offire or electric shock, do NOT use an extension lead or adapter

to connect the washing machine to the mains electricity.

The machine must only be used for what it was designed for.

Follow the washing instructions recommended by the manufacturer of the item to be

washed.

Do not start the washing machine until you have made sure that:

It has been installed according to the installation instructions.

All the water, drainage, mains and earth connections comply with local

standards and other applicable standards.

8/22/2019 Kg k 1317788196

5/27

Warnings and precautions

t e c h n i c a l

2

Specifications plate (Registration plate)

This is situated on the hatch on the front of the washing machine. This plate indicates

the following:

FAGOR 3F-2609

COD.905013069

0905013069050900001

2200W 220-230V-50Hz

10A. 4.9-98N/cm2NIF ESF20020517

N.050900001

TYPWM-900E3B

Mains electricity grid voltage and frequency

Month of manufacture

Year of manufacture

Washing machine code

(9 digits)

Total power

2%')342!4)/.0,!4%

-!2+!.$-/$%, 490%/&!00!2!453

/&&)#)!,#%24)&)#!4)/.39-"/,

!.$/4(%23

3%2)!,.5-"%2

0/7%26/,4!'%!.$&2%15%.#9 #!0!#)49

-!).37!4%202%3352%

"!2#/$%

490%/&!00!2!453

8/22/2019 Kg k 1317788196

6/27

Features

t e c h n i c a l

3

2.- Features

This range is comprised of the following models:

F7-212

Select

TurboTimePlusABSAA8kg+

1200 r.p.m.

Select

F7-412 X

TurboTimePlusABSAA8kg

1200 r.p.m.

+

V4 display

ON/OFF

button

Detergent

drawer

Programme

selector controlStart-Pause

button

Spin + flot

buttonTime delay

button

Additional

functions

button

V3 display

ON/OFF

button

Detergent

drawer

Programme

selector control

Start-Pause

button

Spin + flot

buttonTime delay

button

Additional

functions

button

8/22/2019 Kg k 1317788196

7/27

Description of operation

t e c h n i c a l

4

Selecting additional functions

Button for selecting additional functions according to programmes.

a) It has 3 options: easy iron, intensive wash, extra

rinse. Press the select button to display to required

option.

b) By clicking several times you can choose between

various combinations, of one, two, and even three

additional functions at the same time, depending on

the chosen programme.

Key: Easy iron

This option reduces the formation of creases in

garments by performing a special programme with

special movements to fluff up the garments after the

spin and make ironing easier.

Key: Extra rinse

This increases the intensity of the final rinse applied to the clothing. This is

recommended for large loads and garments belonging to users with sensitive skin.

Increases water consumption!

Key: Intensive Wash

This option, specially recommended for very dirty or stained garments, gives better

results by lengthening the wash cycle.

Time delay option

Time delay selection key A delay of up to 24 hours

may be selected. The delay must be selected after

choosing the wash programme.

To select the time delay in hours, press the clock

button. Each press delays the start time by one

hour.

Cancelling time delay To cancel the time delay, press the clock button repeatedly.

The delay will be cancelled by reaching 24 hours and then pressing once more.

Changing to another programme also cancels the delay.

3ELECT

3ELECT

3ELECT

8/22/2019 Kg k 1317788196

8/27


t e c h n i c a l

5

Spin selection

The wash options must always be selected after selecting the wash programme. Any

change of programme during the selection annuls the options which had previouslybeen selected.

a) Spin selection and anti-crease (flot) button

The selected programme has an associated spin

speed in revolutions per minute, as shown on the

screen.

b) This can be modified by pressing the spin button

repeatedly and the spin speed in revolutions will godown by 100 each time, until 400.

c) Skip spin opt ion

Press the spin button once more to reach the skip

spin option. A programme without a final spin is

used to prevent creases from forming when washingspecial fabrics.

d) Flot/anti-crease option

This stops at the final rinse, leaving the clothing

floating in water. When the function is deactivated,

the washing machine continues the programme,

draining and spinning. This is used when you are

not at home, for example, to delay the spin until youhave arrived so that creases are not caused by the

clothes being spun and then left in the drum.

3ELECT

B

3ELECT3ELECT

A

3ELECT

C

D

3ELECT

8/22/2019 Kg k 1317788196

9/27


t e c h n i c a l

6

Lock selection

Activate lock

a) Locking is activated by keeping the start/pausekey pressed for at least 3 seconds.

The screen will show that it has been activated.

Deactivate lock

b) The lock is deactivated when the wash programme

ends.

To unlock before the end of the programme, pressthe start key again for at least 3 seconds. After

3 seconds the lock indicator on the screen will

disappear and the machine will be paused.

The ON/OFF button does not deactivate the lock.

Programme ending

When the programme ends the screen will display

0.

When the door is opened or the lock is deactivated

the screen will display 000.

Demo Programme

Press the spin and select buttons simultaneously for at least 3 seconds to activate

and deactivate the DEMO programme.

a

b

Select

Select

8/22/2019 Kg k 1317788196

10/27

Features

t e c h n i c a l

7

Programme tables

Wool/mixwo

ol

verylightsoiling

Wool/mixwo

ol

WOOL35

white/colour

lightsoiling

Programme

Recommended

temperature

Typeofmate

rial

Buttonsforpossibleoptions

1 2 3 45

(*)

6 7 8 910

11

12

13

14

15

16

Rinses

Spin

Drainage/End

30

30

40

60

90

60

40

60

40

30

30

Extra

rinse

Intensive

wash

Easy

iron

Select

spin

Skip

spin

Anti-crease

Max.

load(Kg

Normalcold

Fast30C

Normal30C

Normal40C

Normal60C

Normal90C

Pre-wash60C

Delicatecold

Delicate30C

Delicate40C

Delicate60C

Coldwool

Wool35C

cold

cold

WOOLCold

Cotton/Linen

delicatecolours

veryslightlysoiled

Cotton/Linen

white/coloured

veryslightlysoiled

Cotton/Linen

delicatecolo

urs

slightlysoiled

Cotton/Linen

Solidcolours

Slightlysoile

d

Cotton/Linen

Solidcolours

Normalsoiling

Cotton/Linen

White

Verydirty

Cotton/Linen

White/solidc

olours

Verydirty

Synthetic/mix

Cottondelica

tecolours

Veryslightly

soiled

Synthetic/mix

Cottondelica

tecolours

Slightlysoile

d

Synthetic/mix

Cottondelicatecolours

Normalsoilin

g

Synthetic/mix

Cottonwhite

/solidcolours

Normalsoilin

g

Cotton/mixcotton

Synthetic/De

licate

Wool/woolm

ix

Cotton/mixc

otton

Synthetic/De

licate

Wool/woolm

ix

Cotton/mixc

otton

Synthetic/De

licate

Wool/woolm

ix

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

NO

YES

NO

NO

YES

YES

YES

YES

YES

NO

YES

NO

NO

YES

YES

NO

Normalprogramme Delicateprogrammes Prog.Wool Additionalprogrammes

0.1

0/59

0.2

5/30

0.3

0/59

0.6

0/59

1.5

2/59

2.2

0/64

1.5

0/64

0.1

0/45

0.2

0/45

0.4

0/45

1.0

0/45

0.0

5/55

0.4

5/55

0.0

5/25

0.0

5/0

0.0

0/0

50

30

52

57

80

110

100

50

50

55

70

30

40

23

10 2

_ _

8 2 8 8 8 8 83

.5

3.5

3.5

3.5 2 2 8 8 8

Washproducts

compartiment

TURBOTIMEPLUS

M

x.load

(Kg)

Programm

eDescription

Total

consumption

KWh/litres

Approx.

duration

(min.)

Normalwash,r

inses,

automaticadditiveabsorption

irequired,an

dlongfnalspin

SHORTwash,rinses,


irequired,an

dlongfnalspin

Normalwash

,rinses,

automaticad

ditiveabsorption

irequired,an

dlongfnalspin

Pre-wash,normalwash,r

inses,


irequired,an

dlongfnalspin

Delicatewash

,rinses,


irequired,an

dgentlefnalspin

WOOLwash,rinses,


irequired,an

dgentlefnalspin

Rinses,autom

atic

additiveabsorptionirequired,

andlongfnalspin

Emptyingandlo

ngfnalspin

Emptyingandendoprogramme.

Takestheprogrammetothefnalposition

8/22/2019 Kg k 1317788196

11/27


t e c h n i c a l

8

3.- Descript ion of operation

3.1.- General description

3.1.1.- Component characterist ics

Component Function Features

Motor

1250 RPM

Used in machines with

variable spin; makes

rotating movements

when washing and

spinning.

Motor power supply:

- Clockwise, power

220V. , contacts 2 and3. Bridge between

contacts 5 and 6.

- Anti-clockwise,

power 220V. , contacts

3 and 5. Bridge

between contacts 2

and 6.

Voltage: 220 v / 50 Hz

Stator resistance: 1.3

Rotor resistance: 1.7

Tachogenerator resistance:

184

Tachogenerator voltage: 1.2

v / 1,000 rpm

Double field motor

1400 RPM

Used in machines with

variable spin; makes

rotating movementswhen washing and

spinning.

Motor power supply:

- Clockwise, power

220V. , contacts 4 and

5. Bridge between

contacts 3 and 6.

- Anti-clockwise,

power 220V. , contacts

4 and 6. Bridgebetween contacts 5

and 3.


Stator resistance: 3.3

Rotor resistance: 2.46 Tachogenerator resistance:

90

Door lock Opens and closes

hatch lock.


16 Amp.

Between 40 and 75

seconds delay.

2

4' 34!4/2

4(%2-)#

02/4%#4/2

34!4/2 4'2

4(%2-!,

02/4%#4/2

8/22/2019 Kg k 1317788196

12/27


t e c h n i c a l

9

Component Function Features

Door lock with instant

opening

Hatch closing

Manual opening for use

in case of electricity

supply failure.

Recirculation pump Re-circulates the drum

water for greater wash

effectiveness and

reduced programmetimes.

Voltage: 220-240 V /50 Hz

Drainage pump resistance

170

Recirculation pumpresistance 180

Both with thermal protector.

Power 30 (W)

Doubly connected

electrically operated

valve

Allows water intake in

the pre-wash, wash and

rinse phases.

EV1 pre-wash orange

connector

EV2 wash blackconnector

EV1 + EV2 additive

intake

Voltage: 220-240 V /50 Hz

Power: 5 W

Flow: 6.7 litres/ minute

Pressure: 0.5-10 kg / cm

Resistance: R1=R2=R3=

3.7 K3/4 Thread Gas

12mm conduit diameter

Pressure switch The pressure gauge

is activated in the

following conditions:- When the wash level

reaches 12 litres.

(11-12)

- When the level

exceeds 33 litres

(overflow), the drainage

pump is activated

(safety).

(11-16)

- The rinse level is

performed accordingto the time of the

microprocessor of the

electronic card.

Level 1

102 / 72 3

Overflow safety device

310 10

11

12

14

16

12 Water intake14 Heating16 Overflow

11 Common

8/22/2019 Kg k 1317788196

13/27


t e c h n i c a l

10

Componente Function Features

Heating resistance Heating element +

thermal fuse incorpo-

rated into the element

itself

Thermal fuse cut-out

temperature165

Resistance: 26.4

Material: Austenitic

stainless steel

Power: 2022 W

Voltage: 230 v

NTC 30C variable

resistance value 9786

V3 electronic circuit Power and display

circuit


Important: It is necessary

to configure the circuit

before starting the machine.

(Follow configuration

instructions)

V4 electronic circuit Power and display

circuit


Important: It is necessary

to configure the circuit

before starting the machine.

(follow configuration

instructions)

8/22/2019 Kg k 1317788196

14/27


t e c h n i c a l

11

For 9 Kgs washing machines, to loose the clamp nut-pulley drum support

must used a wrench M16(Reference AS0008971) .

Nut-pulley drum support

Pulley tool (AS0008971)

8/22/2019 Kg k 1317788196

15/27


t e c h n i c a l

12

3.1.2.- V3 and V4 circui t configuration

If the circuit is not configured it will go into status as soon as it is plugged in (go to

step no. 7) If the circuit is configured it enters the current configuration. To change the

configuration, follow these steps:

1.- Turn the machine off

2.- Press the start / pause button and keep it pressed (until step 5)

3.- Press the button for 1 second until the LCD screen lights up

4.- Press the spin button and wait 2 seconds until the letter is displayed on

the LCD screen

5.- Release all keys simultaneously

6.- The door lock will be locked

7.- Press the spin button (the last digit of the LCD will flash).

8.- Pressing the CLOCK button changes the parameter to be adjusted, starting with

the KG digit and following the sequence KG RPM RECIRCULATION HOT

WATER DOOR OPENING KG.

Pressing the SPIN button changes the value of the parameter; the possible values

are limited to the circuits hardware reference and the selected KGs.

If the KGs are changed after having selected the RPM and the previous RPM value isnot permitted for the newly selected KGs, the RPM will re-adjust to the value closest

to the newly selected KGs.

RPM RECIRCULATION PUMP

YES /NO

COLD WATER

YES /NO

DOOR OPENING

YES /NOKG

Select Select

8/22/2019 Kg k 1317788196

16/27


t e c h n i c a l

13

KG Drum capacity

7: 7 kg

8: 8 kg

KG options depending on circuit references /washing machine model.

HOT WATER

0: Cold water

8: Hot water

If the circuit does not have this option it willalways be 0.

R.P.M. (Revolutions per minute)

These values depend on the hardware

reference and the KGs selected.

DOOR OPENING

0: WITHOUT door opening

8 : WITH instant door opening

If the circuit does not have this option it will

always be 0.

RECIRCULATION

0: WITHOUT Recirculation Pump

00: WITH Recirculation Pump

If the circuit does not have this option it will

always be 0.

Circuit validation (see table 1)

Once the circuit has been configured it is

confirmed by pressing the start/pause button for

3 sec. until the digits stop flashing. After 3 sec. it

exits the configuration process, entering the TSS

programme (See table 1)

Fagor T.S.S. Programme

In order to check the operation of the washing machines electric components, select

the T.S.S. programme by following these steps:

1.- General ON / OFF switch (LCD off)

2.- Press the start / pause button and keep it pressed

3.- Hold down the ON/OFF switch until the LCD screen lights up.

4.-Press and hold down the select spin button and wait approx. 2/ 3 sec. until theletter is displayed on the screen

5.- Release all buttons simultaneously

6.- Press the spin button and wait until the digits on the screen (LCD) appear (the last

button on the right flashes).

7.- Press and hold down the start / pause button until all the digits on the screen

are flashing.

8.- The number 1 will be displayed on the screen then follow the instructions in table

1, below.

DISPLAY SELECTION MODE TIME (APROX.)

1 Water intake via Pre-wash Electrovalve + Movement of wash

motor at 55 rpm

10 seconds

2 Emptying + Spin 5 min.

3 Water inlet via the electronic valve for washing until wash level is

reached

Pressure switch

level

4 The resistance starts to heat up until it reaches 40C +

Intermittent recirculation 90 sec. without being activated and 30

sec. activated

40C

5 Water input via pre-wash, wash and softener electrically operated

valve + Recirculation

5 seconds

Pump empty 30 seconds

6

5

4

3

2

1

8/22/2019 Kg k 1317788196

17/27


t e c h n i c a l

14

Select

F7-412 X

TurboTimePlusABSAA8kg

1200 r.p.m.

+

XXXX

XXXXXXX

LF5S017A3

F-2812

12

(00)

(0)

(0)

R

AF

AP

8REFERENCEBARCODE

CONTROLPAN

EL

(COD.

39)

R.P.M. 1200

R (00) With recirculation

AF (0) Cold water

AP: Does not have instant door

opening

KG. 8 Kg.

To display the washer

configuration:

1 Configure Kg.

2 Configure R.P.M.3 Configure Recirculation

4 Configure Cold water

5 Configurar Door opening

Press the START button for

3 seconds and the screen

displays:

F7-212

Select

TurboTimePlusABSAA8kg+

1200 r.p.m.

F-4812 X

XXXX

XXXXXX

X

LF5S004X7

12

(00)

(0)

(8)

R

AF

AP

8CODIGOD

EBARRASREFERENCIA

PORTAMANDOS

(COD.

39)

To display the washerconfiguration:

1 Configure Kg.

2 Configure R.P.M.

3 Configure Recirculation

4 Configure Cold water

5 Configure Door opening

Press the START button for 3

seconds and the screen dis-

plays:

R.P.M. 1200

R (00) With recirculation

AF (0) Cold water

AP: Has instant door opening

KG. 8 Kg.

Label location: It is located in the detergent drawer.

8/22/2019 Kg k 1317788196

18/27

8/22/2019 Kg k 1317788196

19/27


t e c h n i c a l

16

The speeds allowed for the V3 circuits depend on the hardware reference (with/without

double field) and the washing machine capacity (in kg), and are as follows:

RPM DOUBLE FIELD MOTOR5 kg 700 800 900 1000 1100 --- --- --- --- ---

6 kg 700 800 900 1000 1100 1200 1300 1400 --- ---

7 kg 700 800 900 1000 1100 1200 1300 1400 1500 1600

Once the circuit has been configured, it is confirmed by pressing the ON button for

3 seconds, which is when the selected code will appear in the LCD for 3 seconds

without flashing, exiting the configuration process.

The speeds allowed for the V4 circuits depend on the hardware reference (with/without

double field and FC) and the washing machine capacity (in kg), and are as follows:

MOTOR 1250 DOUBLE FIELD MOTOR

6 kg 700 800 900 1000 1100 1200 1300 1400 --- ---

7 kg 700 800 900 1000 1100 1200 1300 1400 1500 1600

FC (MOTOR CONVERTER)

6 kg 1300 1400 --- --- --- ---

7 kg 1300 1400 1500 1600 1700 1800

8/22/2019 Kg k 1317788196

20/27


t e c h n i c a l

17

3.1.3.- Washing machine vibrations

Wash vibrations

3%-)$%,)#

!4%6)"2!4)/.

3%-)$%,)#!4

%6)"2!4)/.

350%26)"2

!4)/.

0,536)"2!4)/.

&,/46)"2!4

)/.M

AX

TIM

EH

OURS

./.$%4%#4)/./

&

/6%2&,/7!

2%!

!.4)#,/#+7)3%

#,/#+7)3%

./2-!,6)"2!

4)/.

6%29$

%,)#!4%6)"2!4)/.

4336

)"2!4)/.

%842!

6)"2!4)/.

3%#

3%#

3%#

3%#

3%#

3%#

3%#

3%#

8/22/2019 Kg k 1317788196

21/27


t e c h n i c a l

18

Spin vibrations

Easy iron

. /

2 - ! ,

3 0 ) . ! . $

% !

3 9 ) 2

/ .

% , %

# 4 2

/ . ) # 7 !

3 ( ) . ' - !

# ( ) . %

3 %

0

(!3%%!39)2/.

0(!3%%!39)2/.

0(!

3%%!39)2/.

0(!3%

%!39)2/.

-!#().%-/$%,

20-

3%,%#4/2

)-"!,!.#%4%34

)-"!,!.#%4%34

)-"!,!.#%4%34

AND

)-"!

,!.#%4%34AND

8/22/2019 Kg k 1317788196

22/27


t e c h n i c a l

19

Normal spin:

0(!3%./2-!,30).

3TEP

3TEP

3TEP

3TEP

3TEP

3TEP

3TEP

3TEP

)-"

!,!.

#%

4%

34

20-3

%,%#4/2

0/3)4)/.3

3%#

$EPENDINGON

THEPROGRAMME

8/22/2019 Kg k 1317788196

23/27


t e c h n i c a l

20

3.1.4.- Description of the operation of programme no. 2

Programme no. 2 is a short (quick) programme which takes 30 minutes and heats to

30C.

It is a suitable programme for a technician making any operational checks.

The programme phases and their approximate start and end times are described

below.

30 13 13 8 8 3 1 0

Pre-wash phases Wash phase Rinse phase Spin

Water intake

Heating to30C

End of Heating 1st Rinse+

Spin

Note: When the LCD screen shows 000, the door lock is de-activated

2nd Rinse+

Softener

Untangle clothes

Drain+

Spin

Spin

8/22/2019 Kg k 1317788196

24/27


t e c h n i c a l

21

3.1.5.-Attempts to spin

If the washing machine detects unbalanced clothes in the spin cycle it will follow this

process:

The total number of attempts to start spinning is 10 20, divided according to these

criteria.

In the first 6 attempts, the maximum unbalanced limit allowed is 550g.

From the 7th to 18th attempts the maximum unbalanced limit allowed is 800g and

the final speed is less than the nominal speed, for example a 1,200 r.p.m. washing

machine will spin at 1,000 r.p.m.

For the 19th and 20th attempts, the maximum unbalanced limit allowed is 1,500 g.,

and thefi

nal spin speed will be 650 r.p.m., except in washing machines with a nominalspeed of 700 r.p.m., which will spin at 400 r.p.m.

This number of attempts to reposition the clothes in the drum will increase the total

programme time by 20 minutes.

At the end the LCD screen will display CO3. This is not considered a fault as it warns

the user about the security measure the circuit has detected.

If an imbalance is detected in the rinse phase, the number of attempts will not exceed

3.

CONNECTOR CONTACT COMPONENT DENOMINATION VALUES TO OBTAIN

ST1 L-N POWER SUPPLY 220-240 V

ST1 11-16-12 PRESOSTAT CONECTION CONTINUITY

ST1 R RESISTOR - 14 PRESOSTAT 25,5

ST2 TACHO1-TACHO1 MOTOR TACHO-GENERATOR 90 -180

ST2 ROT1-ROT2 MOTOR ROTOR 2-4

ST2 ST1-STW-ST2 MOTOR STATOR 1-3

ST3 CTN CTN 10 K

ST4 EB DRAIN PUMP 190

ST4 RC RECYCLING PUMP 180

ST5 BPN-BPC DOOR LOCK (RED - BROWN) 750-1100

ST6 EV1 ELECTROVALVULA PRELAVADO 3.650

ST6 EV2 WASHING ELECTROVALVE 3.650

ST7 EV3 SOFTENER ELECTROVALVE 3650

ST8 BMF INTELLIGENT CONNECTION

ST9 PC PC CONNECTION

ELECTRONIC CIRCUIT CONNECTIONS COMPONENTS CHECKING 7 - 8 Kgs

THE OBTAINED VALUE TOLERANCE TO APPLY MUST BE 10%

8/22/2019 Kg k 1317788196

25/27


t e c h n i c a l

22

3.2.- Drawings and diagrams

Onlyforhotwater

8/22/2019 Kg k 1317788196

26/27


t e c h n i c a l

23

CONTROLPANE

L

CONTROLPANE

L

E.V.3HOTWATER

PRESSURE SWITCH

FILTER

E.V.

1PRE-WASH

E.V.

2WASH

FUSE

ELEMENT

CONTROLPANEL

CONTROLPANEL

DOOR LOCK

RECIRCULATION

PUMP

DRAIN

PUMP

Reference electric installation cold water with recirculation LH6J200A6.

8/22/2019 Kg k 1317788196

27/27

FAGOR ELECTRODOMESTICOS, S.COOP. 2006B San Andrs, s/n

20500 Mondragn (Gipuzkoa)

kg k 1317788196

Documents