justification for intermediaries
TRANSCRIPT
-
8/7/2019 Justification for Intermediaries
1/26
Justification for Using Intermediaries
Improve exchange efficiency.
There are certain costs associated with an exchange, therefore need to try to reduce the number of
transactions (exchanges):
*Chicken *Customer1 With 1 intermediary---10 transactions
*Potatoes *Customer2 With no intermediaries---25 transactions
*Carrots * *Customer3
*Plates *Customer4
*Silverware *Customer5
Without an intermediary, each buyer has to negotiate and exchange with each seller. With one
intermediary, each buyer negotiates with one intermediary (as opposed to 5 sellers), and each seller
negotiates with one intermediary (as opposed to 5 buyers).
Number 2 Reason
Intermediaries are specialists in the exchange process, provide access to and control over important
resources for the proper functioning of the marketing channel. Division of labor.
Still need services that intermediaries (wholesalers, retailers etc.) provide; if they were eliminated then
someone else would have to assume the tasks (either producer or customer). Functions can be shifted
and shared among channel members, but cannot be eliminated, unless the buyer assumes them.
-
8/7/2019 Justification for Intermediaries
2/26
"you can eliminate the middle man, but you can't eliminate their functions"-a well accepted maxim in
marketing.
Return to Contents
Functions of Intermediaries
Primary role of middlemen is to transform the assortment of products made by producers in the
assortments desired by consumers.
Producers make narrow assortments in large quantities, consumers want broad assortments in small
quantities, discrepancy in quantity and assortment.
Match Supply and Demand:
*Chicken *Customer1
*Potatoes *Customer2
*Carrots *Customer3
*Plates *Customer4
*Silverware *Customer5
PRODUCER Specialization in production, economies of scale etc., therefore wants to produce large
quantities but narrow product mixes.
efficiently
CUSTOMER Wants a broad assortment (products produced by many manufacturers) of products made
available conveniently (within easy reach).
Other functions of intermediaries include:
* assuming risk--Provide working capital by paying for goods before they are sold.
-
8/7/2019 Justification for Intermediaries
3/26
* information Flow
* financing
* payment and title flow.
* negotiation
* contacts
* promotion
A producer will use an intermediary when it believes that the intermediary can perform the function(s)
more economically and efficiently than it can.
Return to Contents
Types of Channels of Distribution
Consumer Channels
Channels for Consumer Products.
Vertical dimensions, determined by the # in the channel.
Channel A:
Producer
|
|
|
|
|
|
v
Consumer
-
8/7/2019 Justification for Intermediaries
4/26
IE door to door purchases, Unsought products IE Encyclopedias. Fruit picking orchards.
Services often use direct channels since the service provider, in most cases, must be there to provide the
service.
Simplest method, not necessarily the most effective.
Technological developments are making the direct channel more common:
* TV Homeshopping
* CDs
* Catalogs, LL Bean etc.
* Internet, WWW
When you can use the media of communication to effect exchange...1-800#s, Credit Cards etc.
Handout...Microsoft's Ali Baba Software-Selling Plan Has Rivals Boiling.
Discusses Microsoft's method of distributing its software directly from its Window's CD.
Channel B:
Producer
|
|
|
|
v
Retailer
|
|
-
8/7/2019 Justification for Intermediaries
5/26
|
|
v
Consumer
Large retailers, JC Penney, KMart, no discrepancy in quantity supplied and demanded. Popular for
shopping products, clothing. Automobiles...cost of transportation and inventory is high.
Channel C:
Producer
|
|
|
v
Wholesaler
|
|
|
v
Retailer
|
|
|
v
Consumer
-
8/7/2019 Justification for Intermediaries
6/26
Smaller retailers, widely distributed products, convenience products.
Channel D:
Producer
|
|
|
v
Agent
|
|
|
v
Wholesaler
|
|
|
v
Retailer
|
|
|
v
-
8/7/2019 Justification for Intermediaries
7/26
Consumer
Mass distribution, IE processed food; also when there are a number of small producers etc. May be the
most efficient distribution channel for consumer products.Convenience products.
Horizontal dimensions, the # of channel members at the same level.IE Chevrolet much wider distribution
than Rolls Royce.
Business to Business Channels
Channel E:
Producer
|
|
|
|
|
V
Buyer
Very popular, especially for high cost items that need after sale support. Fewer customers clustered
geographically. This is a more common structure than the direct channel in consumer markets.
Channel F:
Producer
|
|
|
-
8/7/2019 Justification for Intermediaries
8/26
v
BB distributor
|
|
|
V
Buyer
Distributor takes title. Used when there are many customers. IE consumable supplies etc.
Channel G:
Producer
|
|
|
v
Agent
|
|
|
v
Buyer
When a company does not have a marketing department or sales force, the agent performs those tasks.
Channel H:
-
8/7/2019 Justification for Intermediaries
9/26
Producer
|
|
|
v
Agent
|
|
|
v
Distributor
|
|
|
v
Buyer
Used as above, with many customers, IE exporting.
Return to Contents
Multiple Marketing Channels
Dual Distribution
Use several types of channels simultaneously, IE when you have consumer and business to business
markets. Set up 2 or more Marketing channels to attract the same target market or different target
markets. Using two or more channels to attract the same target market can lead to channel conflict.
-
8/7/2019 Justification for Intermediaries
10/26
Handout...Time Warner to Launch...
This article discusses Time Warner developing additional distribution channels, adopting dual
distribution. The idea is to find efficient ways to make your product available to your customers.
* Record Stores
* TV Shopping
* Catalogs
* Columbia House
It is very important however to avoid Return to Contents
Wholesale Intermediaries
Wholesale transactions are all transactions except the transaction with the ultimate consumer.
Classification of a wholesaler or retailer is determined by the purchaser, not by the price. If over 50% of
sales is with other intermediaries then the intermediary is a wholesaler. If over 50% of sales is with the
consumer, then the intermediary is a retailer.
Firms can engage in wholesaling activities without being wholesalers.
Return to Contents
Nature and Importance of Wholesaling
Approximately a $1.94 trillion industry in the US
300,000 wholesaling establishments in the US
Employ 6.5 million people, down from 6.57 million in 1989
Very competitive. Wholesalers will be eliminated from a channel if they do not perform valuable
functions effectively and efficiently.
-
8/7/2019 Justification for Intermediaries
11/26
Return to Contents
Types of Wholesale Intermediaries
2 Types of intermediaries:
*
Merchant intermediaries
--buy products and resell them.
*
Functional intermediaries
--do not take title, they expedite exchanges among producers and resellers, compensated by fees
and/or commission.
Merchant Wholesalers
Take title.
Account for approximately 83% of wholesalers, 50% of wholesale sales. Employ 4.5 million people.
Two types:
* Full Service Wholesalers-offer widest possible range of functions. Categorized as:
o General Merchandise-wide mix (unrelated), limited depth.
o Limited Line-only few products but an extensive assortment.
o Specialty Line-narrowest range of products.
o Rack Jobbers-are specialty line that own and maintain display racks, take back unsold products.
* Limited Service Merchant Wholesalers-only provide some marketing functions.
o Cash and Carry wholesaler-customers pay and furnish their own transportation, No credit.
o Truck Wholesalers-Operate rolling warehouses and sell a limited line of products directly from their
trucks to their customers. Follow regular routes, primarily perishable products.
-
8/7/2019 Justification for Intermediaries
12/26
o Drop Shippers (desk jobbers)-take title, negotiate sales but do not take possession.
o Mail Order Wholesalers-use catalogues instead of sales force to sell.
Agents and Brokers
Negotiate purchases, expedite sales but do not take title.
Functional middlemen, that bring buyers and sellers together.
Compensated with commission.
Agents represent buyers and sellers on a permanent basis.
Brokers represent buyers and sellers on a temporary basis.
10.4% of wholesalers total sales volume.
* Manufacturers Agent-over half of all agents. Represent two or more sellers and offer customers
complete lines. Handle non- competing (complementary) products. Written agreements.
* Selling Agent-market either all specified line or manufacturers entire output. Perform every
wholesaling activity except taking title of the product. Used in place of a marketing department.
Represent non-competing product lines.
* Commission Merchant-focus primarily on the selling task. Receive goods on consignment from local
sellers and negotiate sales in large central markets.
* Auction Companies-provide storage for inspection. Sales made to the highest bidder.
* Brokers-negotiate exchanges-perform the fewest intermediary functions. Assume no risk.
Manufacturers Sales branches and offices
Resemble merchant wholesalers operations, 9% of wholesale establishments and generate 31% of
wholesale sales. Manufacturer owned.
-
8/7/2019 Justification for Intermediaries
13/26
* Sales Branches-sell product and provide support services to manufacturers sales forces.
* Sales Office-serves normally associated with agents; like sales branches located away from a
manufacturing plant-carry no inventory.
Return to Contents
Vertical Marketing Systems
The traditional view of channels focuses on buyers and sellers in direct contact. IE don't look beyond the
next level. The systems view focuses on a framework for the whole distribution system.
A Vertical Marketing System (VMS) is a marketing channel that a single channel member coordinates.
The channel member manages channel activities to achieve efficient, low cost distribution aimed atsatisfying the target market customers. There are three types of Vertical Marketing Systems, Corporate,
Administered and Contractual.
Corporate VMS
More than one stage of the distribution channel under one ownership, IE supermarket chains that own
processing plants and large retailers that purchase wholesaling and production facilities.
Examples:
* Sears
* Sherwin Williams
* Giant Foods
* Gallo
* Banana Republic
* Hallmark
* The Gap
* Oil Companies
-
8/7/2019 Justification for Intermediaries
14/26
Administered VMS
Channel members are independent with a high level of interorganizational management by informal
coordination. Agree to adopt uniform accounting policies etc., and promotional activities.
One Channel member dominates, has a channel leader.
Examples:
* Wal Mart
* Toys R Us
* Kellog
* Pepsi
* Coke
* GE
* P&G
* McKesson Corp
* JC Penney
* Campbell
Channel Leader-Effectiveness of channel hinges on channel leadership. Leader must possess channel
power. Power can come in the following forms:
* Reward--provide financial benefits
* Expert--be the expert compared with other members
* Referent--strongly identify with leader
* Coercive--punish members
-
8/7/2019 Justification for Intermediaries
15/26
Contractual VMS
Most popular VMS, interorganizational relationships formalized through contracts that spell out each
members rights and obligations. IE McDonald's and KFC. Franchise organizations 1/3 retail sales and
500,000 outlets.
Wholesaler sponsored, IGA stores-independent retailers band together under contractual leadership of
a wholesaler.
Supervalue Stores, largest food wholesaler in the US, offers a broad package of services to 2800
independent food retailers that voluntarily enter into a buying contract.
Retailer sponsored cooperatives which set up, own and operate their own wholesalers.
Handout...Focusing on the Distribution of TV Programming
Moving from an administered VMS to a contractual/corporate VMS system. The networks are losing
their channel power, since there are now six of them competing for the same amount of affiliates as
when it was only ABC, NBC and CBS. Now the networks are contracting (Contractual VMS) with the
affiliates in the hope they will stay loyal to them, or increasing the size of the contracts, or even taking
some form of ownership stake (corporate VMS).
Return to Contents
VMSs try to overcome:
Channel Conflict
Channel members may disagree on the best methods to attain goals. Inevitable when individual short
run goals are not compatible. Can occur between firms at the same level, or between firms at different
levels. Want to maximize profits and autonomy.
Channel members belong to different channel systems, creating potential conflicts. Producers may try to
circumvent intermediaries.
Handout...Whats wrong with selling used CDs.
This article is an excellent example of channel conflict. The retailers are selling used CDs, and the
distributors are not happy, since they receive no revenue from this product, and it competes with their
product. They retaliate by removing advertising monies etc. Other issues include distributors using mail
order wholesale clubs to sell CDs, which is a form of Dual Distribution since they compete directly with
-
8/7/2019 Justification for Intermediaries
16/26
the traditional retailers, and sell their product very inexpensively...this is also a source for used CDs, as is
the return policies of the retail stores etc.
Return to Contents
Selection of Distribution Channels
Should determine what the final buyer wants and determine the best way to reach them. Marketing
Oriented!!
Determined by:
1. Organizational Goals, Objectives (same day delivery), resources and capabilities. Companies with
wide product mixes can sell more directly to the retailers, have more promotional skills etc. (P&G)
2. Market Characteristics, Geography, greater distance use more intermediaries, market density,clustering, market size etc., industrial vs. consumer, Buyer Behavior, Where?/How?/ May need creativity
, L'Eggs
3. Product Attributes, IE Need to provide a service. Perishability-short channels, storage requirements,
space, fashion, size (reduce handling), complexity, standard.
4. Environmental Forces, IE Competition, Technology
Need to determine the # of Intermediaries
Determine the channel width, intensity of distribution, the products market exposure.
*
Intensive Distribution:
All available outlets are chosen for maximum exposure (within reason)....THAT A CONSUMER WOULD
PURCHASE THAT TYPE OF PRODUCT. Timex sells through 45,000 drug stores and thousands of other
stores.
Used for convenience products, especially when sales have a direct relationship to availability.
Availability more important than the nature of the outlet. Gas station vs convenience store
Convenience products have a high replacement rate and require no servicing.
P&G rely on intensive distribution. Good for consumer package goods. PLACE UTILITY
-
8/7/2019 Justification for Intermediaries
17/26
Manufacturer promotional support.
Handout....Food Franchisers Expand by Pursuing Customers Into Every Nook and Cranny.
This article focuses on the importance of intensive distribution in the fast-food industry...make the
product (i.e. Taco Bell) available where a customer may want to purchase fast-food, in the gas station,
shopping mall carts etc. Taco Bell have quintrupled its "points of access" to nearly 25,000 from 4,500 the
end of 1992. Issues of Dual Distribution must be covered that may lead to channel conflict...who services
these additional points of access, the franchisor (Taco Bell), or the franchisee.
*
Selective Distribution:
Only some available outlets (usually geographic) are chosen. Typically shopping products.
Buyers prefer to spend time searching.
Customer service important.
Selective distribution motivates retail support.
Producers have more control.
Retailer promotional support.
*
Exclusive Distribution:
One outlet in a relatively large area. Products purchased infrequently, last a long time and require
service.
Used as an incentive to sellers. No one to undercut them. (Place Utility)
Allows for the highest control.
Easier to get retailers to carry a complete inventory and to provide service and repair facilities.
May be used to introduce new products, then change when market is more competitive (Move from
introduction to the growth stage of the product life cycle.
Horizontal Channel Conflict
-
8/7/2019 Justification for Intermediaries
18/26
The implication is that the intensity of competition among retailers is a major driver of retailer support
(or lack thereof). Invariably, as a product's distribution base is broadened (more accounts, stores, and
types of stores are added), the likelihood of horizontal channel conflict increases between and among
organizations operating in the same "layer" of the distribution network . As channel conflict increases,
retailers' support for a product typically deceases. While channel conflict can rarely be eliminated
completely, it is critical to contain it.
In most instances, horizontal channel conflict boils down to a question of economics: retailer profits are
pushed below acceptable levels as a result of direct or indirect competitive behavior.
Horizontal channel conflict is increasingly common in real life as companies attempt to reach different
customer segments by utilizing multiple distribution channels (including direct from the manufacturer).
More specifically, when multiple channels are employed and distribution intensity increases, three profit
threats may confront a retailer: sales cannibalization, margin dilution, and customer diversion .
Consider the following cases:
-
8/7/2019 Justification for Intermediaries
19/26
(a) A mature, commodity-like product is sold through traditional grocery stores that attempt to
maintain margins at roughly 30%. The manufacturer makes a comparable product available through
warehouse club stores that price to operate at 5% margins by maintaining a very bare bones overhead
structure.
(b) A broadly distributed, heavily advertised, branded product becomes a "traffic builder" for some
retailers. That is, they price the product at or below cost to attract customers to their stores, hoping
that the customers will also purchase other higher margin merchandise.
(c) A new, complex product is introduced though a select group of specialized retailers who compete
on service (i.e. front-end consultive selling) not price. As volume builds for the product, similar versions
are offered through "category killer" discounters who offer no in-store service and compete based on
low prices.
(d) A manufacturer that has traditionally sold its products through full-service specialty retailers decides
to have its sales force call directly on particularly large customers, bypassing the retailers, and decides to
hop on the eCommerce bandwagon by selling to price-sensitive customers via the internet at "factory
direct" prices.
In all of the above cases, there is the potential for significant channel conflict that is virtually certain to
deteriorate retail economics (i.e. lower sales, prices, and profits), which may result in a reduction of
aggregate support for the products.
-
8/7/2019 Justification for Intermediaries
20/26
In case (a), if the grocery stores don't narrow the price spread, they will have some of their sales
cannibalized by the warehouse stores and will likely lose market share since the market is mature (i.e.
slow / no growth).
In case (b), all retailers are likely to suffer margin dilution to the extent that they cut prices (either on an
everyday or promotional basis) in an attempt to maintain their market shares.
In case (c), the full service stores may have some of their customers diverted to the discounters. That is,
customers may take advantage of the pre-sales service, but then buy at the low price outlet. Or the
stores may suffer margin dilution if they accede to customers who benchmark against "low-balling"
competitors and negotiate lower prices This customer practice is commonly referred to as "best-
balling", i.e. negotiating based on the lowest price found in the market. .
Case (d) is often the most controversial and emotional of the channel conflict situations since the
manufacturer is involved. The specialty store may be hit by a profitability triple threat: some sales will
cannibalized by the manufacturer's direct sales force; some full-service customers will be diverted to
buy directly from the manufacturer; and margins will be diluted if prices are reduced to match the
factory direct prices.
-
8/7/2019 Justification for Intermediaries
21/26
In both cases (c) and (d), the full service retailers are likely to become economically demotivated and
shift their sales attention to more profitable products. As a result, the product may lose its primary
sources of market support.
As the above cases illustrate, the dominating distribution objective, broadening market coverage (i.e.
increasing customers' convenience), is somewhat at odds with the other two - enlisting product support
and avoiding channel conflict. While a company may want broad rather than selective distribution, and
may want to attack different market segments though multiple channels of distribution, the stark reality
is that intensive hybrid distribution may, if not very carefully managed, result in horizontal channel
conflict, deteriorating retail economics, and eventual loss of critical retail-level product support.
Mitigating Channel Conflict
While some level of channel conflict is inevitable, especially as products mature, it can be (and should
be) mitigated.
In order to contain the level of conflict, companies need to embrace distribution philosophies that:
(1) Adopt a long-run perspective and refrain from opportunistic initiatives that may jeopardize
established channel relationships for the sake of potentially transient short-term gains.
-
8/7/2019 Justification for Intermediaries
22/26
(2) Are respectful of system economics, recognizing that channel partners must earn fair financial
returns to stay motivated.
(3) Stay open and flexible by avoiding restrictive long-run agreements (formal or "common law") that
foreclose adaptation to changing markets.
On a more tactical level, companies should:
(1) Avoid premature distribution through margin-crunching channels despite their sometimes alluring
potential to satisfy the "thrill of volume".
(2) Delineate clear rules for territorial coverage and "account ownership" so that competing channels
(including the manufacturer direct channel) avoid fighting over the same set of customers.
-
8/7/2019 Justification for Intermediaries
23/26
(3) Build and maintain "fences" between competing channels to minimize leakage. For example, many
companies market different brands to different intermediaries, or offer derivative models that are
similar to, but different from their base products, that match the needs of different channels (e.g.
newest full featured models to specialty stores, older "stripped down" models to discounters), and that
"shelter" retailers from head-to-head price competition.
Welcome to a world where an infinite number of distribution channels are chasing a finite number of
customers. The emergence of the Internet has added considerable complexity to distribution channels
by offering a variety of e-market places such as B2B auctions (PEFA.com), reverse auctions
(Freemarkets.com), B2C operations (Amazon), C2B auctions (Priceline.com), and C2C formats
(Ebay.com).
As a result, the various types of distribution channels available in industries such as airlines, financialservices, music industry, publishing, and telecommunication services are exploding. And manufacturers
who took pride in the integrity of their distribution channels with specific channels reaching specific
customer segments are suddenly facing a dizzying array of choices.
The addition of new distribution channels brings with it the potential for additional sales volume at the
cost of greater channel conflict. A new channel, regardless of whether it is the Internet, an emerging low
cost indirect channel, or a new manufacturer sales force will increase channel conflict.
Channel conflict occurs because now there is another type of distribution channel that is perceived by
the existing channels to be chasing after the same customers with the same brand.
The fear of conflict with existing channels can paralyse a company. But on the other hand much of what
channel members call channel conflict is healthy channel competition. Therefore the objective of
conflict management should not be to eliminate channel conflict but rather manage it so that it does not
escalate to destructive levels.
From the manufacturer's perspective, channel conflict becomes destructive when the existing
distribution channels react to channel migration by reducing support or shelf space for the
manufacturer.
-
8/7/2019 Justification for Intermediaries
24/26
For example, when Este Lauder set up a website to sell its Clinique and Bobbi Brown brands, the
department store Dayton Hudson reduced space on Este Lauder products. In extreme cases, an existing
distributor may drop the brand as happened when Levi's began expanding its distribution. Gap decided
to stop stocking Levis and concentrate on their own Gap brands.
Channel conflict becomes particularly destructive when parties take actions that hurt themselves in
order to hurt the other party. For example, in 2002, Albert Heijn, the largest Dutch supermarket chain,
boycotted some Unilever brands for sometime in order to retaliate against the manufacturer.
While this was resolved quickly, it was an action that could have potentially hurt both parties. Albert
Heijn would have lost some brands such as Bertoli mayonnaise and Cif cleaning products that have very
high brand loyalty amongst Dutch consumers.
As described below, several channel conflict management strategies exist, none of which is a panacea,
but the judicious use of them can help avoid destructive conflict. These are part of the arsenal of any
multi-channel marketer.
Clear segmentation: The rationale for having multiple types of channels should always be built on a clear
end user segmentation strategy. When the convenience store complains to the manufacturer about the
prices at which Wal-Mart is selling their products, it has to be explained that there is no way that a
convenience store can compete with Wal-Mart on prices for the price seeking customer.
Instead the convenience store has to compete on saving the consumer time vis--vis travel, shopping
and transaction processing, all at a reasonable price premium.
They serve two different segments and each should be encouraged to specialise on its target segment.
Of course, the brand owner should ensure that the number of distribution points that they have within a
particular type of distribution channel is balanced against the size of the segment that the channel
reaches.
Dedicated products: Many designers who have pushed for sales through outlet stores have managed the
conflict with their existing retailers by developing special products for these outlet stores.
-
8/7/2019 Justification for Intermediaries
25/26
Similarly, many luxury brand companies, like Camus Cognac and Guylian chocolates, offer special pack
sizes and products that are attractive to travellers at duty-free airports in order to minimise the conflict
with their regular high street retailers.
On the Internet, manufacturers can offer those SKUs which retailers are usually not willing to carry. At
the extreme, some manufacturers dedicate different brands to different channels, sometimes referred
to as channel brands.
Expanding sales: Having a new 'hit' product helps facilitate channel migration. Goodyear managed the
migration to the mass merchandisers with only a reasonable amount of conflict by simultaneously
restricting the distribution of its new Aquatredtyre to the independent dealers.
This allowed the independent dealer to protect their profit-ability and sales volume through the higher
margin, higher value, Aquatredtyre. It is easier to expand channels when revenues are growing as
existing dealers are less likely to see absolute declines in sales and profits.
Dual compensation and role differentiation: Some manufacturers agree to compensate the existing
channels for sales through the new channel. While it may be perceived as just buying off the support of
the existing channels for the channel migration, it can be useful if the existing distribution is given a role
to perform in support of the new channel.
For example, when Allstate started selling insurance directly off the Web, they agreed to pay agents 2%
commission if they provided face-to-face service to customers who get their quotes off the web.
However, since this was lower than the 10% commission that agents typically received for offline
transactions, many agents did not like it.
Yet, it does help lower the negative backlash. Using the existing channel partner can be a useful
complement.
-
8/7/2019 Justification for Intermediaries
26/26
Equitable treatment: Some retailers will be upset that the prices at which they purchase from the
manufacturer are higher than those charged to other retailers or the direct sales force. There is often
the feeling that the manufacturer is favoring other channels at their expense.
While one may never fully be able to overcome these concerns, the best antidote is to treat channels
equitably and in a transparent manner. If the manufacturer's prices differ across channels, it should be
based on the functions that the particular channel member performs.
So, yes, Tesco and Wal-Mart receive lower prices, but it is because they engage in practices (buying large
quantities, not demanding in-store help and promotions) that lower the manufacturer's cost to serve
them.
Final thoughts
The temptation for manufacturers is always to expand the number of distribution points as it usually
results in an immediate increase in sales. However, having too many channels chase too few consumers
results in channels dropping the level of support to the brand.
In the long run, this can have a deleterious impact on sales as well as brand image. On the other handchanging customer preferences modify industry structures. Traditional industry leaders have frequently
neglected the fastest growing new distribution channels.
A delicate balance must be maintained between moving too quickly and unleashing destructive channel
conflict versus clinging too long to declining distribution networks.