joachim schultes university of wuppertal fit wiener dcs training session 2.1

Joachim SchultesUniversity of Wuppertal

FIT WienerFIT Wiener

DCS Training Session 2.1DCS Training Session 2.1

DCS Training 2007: FIT WienerJoachim SchultesJoachim Schultes

OverviewOverview

HardwareHardware• Crates Wiener PL 512Crates Wiener PL 512• ConnectivityConnectivity

SoftwareSoftware• Muhse (communication via USB)Muhse (communication via USB)• OPC (communication via TCP/IP)OPC (communication via TCP/IP)• FIT WienerFIT Wiener

• IntegrationIntegration• ControlControl• WatchdogWatchdog


Crates Wiener PL 512Crates Wiener PL 512

• Two power supply crates are mounted in between two LV_PP4 in a common frameTwo power supply crates are mounted in between two LV_PP4 in a common frame• Each power supply crate consists of 12 Channel with outputs on the back, cables Each power supply crate consists of 12 Channel with outputs on the back, cables

are fixed on the frames (crates are easy to exchange)are fixed on the frames (crates are easy to exchange)• Communication is realized via two ports on the front panelCommunication is realized via two ports on the front panel

• USB (MUHSE) for configuration and debuggingUSB (MUHSE) for configuration and debugging• TCP/IP (OPC) for operationTCP/IP (OPC) for operation

TCP/IPTCP/IPUSBUSB

• LV for the modules LV for the modules VDD and VDDAVDD and VDDA

• max 12 V / 15 Amax 12 V / 15 A• floatingfloating• protections:protections:

• over-voltageover-voltage• over-currentover-current


MUHSEMUHSE

• Communication via USB Communication via USB • Low level tool for configuration and debugging Low level tool for configuration and debugging

(operating) of Wiener crates(operating) of Wiener crates• TCP/IP address (be aware of possibly different subnets for TCP/IP address (be aware of possibly different subnets for

US and USA side)US and USA side)

Interlock behaviour• Maximum valuesMaximum values

• Parallel operation with OPC server possibleParallel operation with OPC server possible


OPC server and User InterfaceOPC server and User Interface

OPC ServerOPC Server• Communication via TCP/IPCommunication via TCP/IP• Configuration managed by .XML files Configuration managed by .XML files

created by FIT Wienercreated by FIT Wiener• NamespaceNamespace• DevicesDevices• ......

User InterfaceUser Interface• Shortcut on desktop (preferred)Shortcut on desktop (preferred)• Additional manager inside the PVSS Additional manager inside the PVSS

consoleconsole


FIT Wiener integration: access controlFIT Wiener integration: access control

• FIT Wiener uses access FIT Wiener uses access control (see manual)control (see manual)

• Reason for disabled buttonsReason for disabled buttons


FIT Wiener integration: managing cratesFIT Wiener integration: managing crates

• ““add crates”add crates”• Crate name has to be Crate name has to be

uniqueunique• TCP/IP address as defined TCP/IP address as defined

inside MUHSEinside MUHSE

• ““OPC setup”OPC setup”• Creation of OPC Creation of OPC

configuration fileconfiguration file

• ““connect to OPC”connect to OPC”• definition of OPC definition of OPC

communication (PVSS communication (PVSS OPC client OPC client OPC server OPC server

• Modifications to entriesModifications to entries(select device with click)(select device with click)

• ““change IP(s)”change IP(s)”• ““delete crate(s)”delete crate(s)”


FIT Wiener control: selecting deviceFIT Wiener control: selecting device

• Select crate with click and open control Select crate with click and open control panel with right click or double clickpanel with right click or double click

• Status of crate can beStatus of crate can be• ““OFF”, “ON”, “unknown”OFF”, “ON”, “unknown”


FIT Wiener control: crate control panelFIT Wiener control: crate control panel

• Displays main information of the 12 channelsDisplays main information of the 12 channels• Channel groups are tagged by blue numbers (right click operates on groups)Channel groups are tagged by blue numbers (right click operates on groups)• Status of channel can beStatus of channel can be

• ““OFF”, “ON”, “?” (unknown)OFF”, “ON”, “?” (unknown)

• ““Inhibit” corresponds to an hardware interlockInhibit” corresponds to an hardware interlock

• Black value corresponds to a bad valueBlack value corresponds to a bad value


FIT Wiener control: channel control panelFIT Wiener control: channel control panel

• ““group settings”: assign a group number to a channelgroup settings”: assign a group number to a channel• ““alerts”: five different reasons for an alert can be distinguishedalerts”: five different reasons for an alert can be distinguished• ““supervision”: specifies the behavior of the channel / group or even crate under 6 supervision”: specifies the behavior of the channel / group or even crate under 6

different detectable error conditionsdifferent detectable error conditionsBe especially careful with the “ignore the failure” option!


FIT Wiener watchdog: all OKFIT Wiener watchdog: all OK

• Separate process monitoringSeparate process monitoring• Wiener Control Manager (self monitoring)Wiener Control Manager (self monitoring)• Wiener OPC DA Client, sends and receives data from Wiener OPC DA Client, sends and receives data from

and to the OPC server and communicates them to and to the OPC server and communicates them to PVSS.PVSS.

• Wiener OPCS, which is the OPC server communicating Wiener OPCS, which is the OPC server communicating with the crates.with the crates.

• Wiener crates themselvesWiener crates themselves

• Monitoring of devices can be disabledMonitoring of devices can be disabled


FIT Wiener watchdog: pending alertFIT Wiener watchdog: pending alert

• OPC client not runningOPC client not running(OPC server status unknown)(OPC server status unknown) start OPC client (-num 14) start OPC client (-num 14)

• OPC server not running (OPC client running)OPC server not running (OPC client running) check configuration file, start OPC server check configuration file, start OPC server

• Device not responding (status unknown)Device not responding (status unknown) check connections and power check connections and power ping to IP ping to IP check IP check IP

joachim schultes university of wuppertal fit wiener dcs training session 2.1

Documents

usb opc communication

operationtcpip opc

access control fit wiener

opc server possible

crates crate

manualfit wiener

frames crates

cratesdelete crates