jck product guide

Product guide Jan 2014 JCK DISTRIBUTORS ENVIRONMENTALLY PREFERRED SOLUTIONS

MINING AND INDUSTRIAL

empathy with People,

delivering value and cost

efficiency with effective

resourcing

Contents

Fuel conditioner

FCC 2-3

FCCV 4

Degreasers

Sure Kleen 5

Exit Grease 6

Big Wash 7

Bitumen Remover and cleaner

B.A.R.C 8-9

Load Release 10-11

Dust suppression 12

Rust remover

Corro-dip 13

De-scaler and rust remover

Phosbrite 14

Hand cleaner

Citrus Clean 15

Lanotec

General Purpose 26-28

Heavy Duty 29-31

Release Agent 32-33

Timber Seal 34-36

Timber Seal Plus 37-38

Type A grease 39-40

Ultimate Protection 41-42

Wire Rope Seal 43-44

Anti-Spatter 45-46

Citra-Force 47-48

Service & support 39

Products

and services

product efficacy

Does the job it says it can do,

efficiently, and with measurable

benefits in cost savings, OH+S

and the environment.

product safety

Products are easy and safe to use

and handle, are non flammable

where possible, comply with

worksafe guidelines, safely

disposed of.

cost effective

We secure favourable prices from

the manufacturer, due to our

bulk buying, and are able to pass

this on to our customers.

Services

if we do not stock a product that

will solve your problem we will

do our best to source it for you.

You name it!

Integrity service performance understanding

FCC is a complete fuel conditioner

providing comprehensive protection

of the fuel system which results in a

clean fuel system with reductions in

running and maintenance costs.

Example of fuel bug

Fuel Bug- the problem

Blocked filters, stuck injectors, internal

corrosion, reduced horsepower and even engine

failure can be caused by a microscopic fungus,

Hormoconis resinae, which is present to varying

extents in all diesels. This fungus commonly

known as the “fuel bug” thrives in fuel storage

tanks using the hydrocarbons in the fuel as a

food source and dissolved oxygen in the water

for respiration.

Hydrocarbons and dissolved oxygen encourage

growth with each fungal cell dividing every 20

minutes. As older fungi die their bodies form a

slime that floats up into the fuel, quickly

clogging filters and narrowing fuel lines. Sludge

adhering to the fuel lines and tank walls

produces corrosive hydrogen sulphide which

causes metal defects in fuel system components

and pitting of the injectors. A unique Rust

inhibitor protects from corrosion.

Microbial growth can be prevented by

eliminating water from the fuel tanks and

ensuring they stay uncontaminated. Biocide

treatment on the other hand will kill any

bacterial and fungal growth but creates a sudden

mass of dead cells which only adds to the

problem.

product applications

• FCC treats petrol, diesel, gasoil, two stroke

BIO-FUELS & heating oil.

• Great for engines of any size and type,

including motorcycles, cars,

vans, trucks, rolling stock and boats of all

shapes and sizes.

Use will not void the engine’s warranty.

• Used in agricultural equipment and

in construction.

• Perfect for marine use in boats of any size.

• Use it in your lawnmower or domestic /

commercial oil tank, to help boilers,

generators, stand-by generators etc.

• Especially useful for holding tanks and

engines or tanks that are laid-up over winter,

when much condensation forms.

easy to use

• Can be used to treat fuel in a holding tank,

or directly into the equipment itself.

• Ideally, to mix well, treat with FCC before

fuel is added

• Use at the economical dose rate of 4,000:1

• For smaller quantities use the CAP on the

bottle to measure accurately.

• Double the dose on first application.

• Use regularly – each time you fill up.

• You cannot overdose with FCC

2

at a glance

• Economical 4000:1 mix ratio

• Treats all fuels – petrol, diesel, gasoil, Bio-

fuels, two stroke & heating oil

• Suitable for all engines

• Removes water from fuel systems

• Kills & removes the Diesel Bug –

no more blocked filters

• Cleans injectors & jets - removes gums,

waxes, resins and acids

• Removes carbon build up

• Reduces harmful exhaust emissions & black

smoke

• Prolongs the life of catalytic converters and

EGR SYSTEMS from malfunctioning

• Reduces expensive maintenance &

downtime

• Restores lost fuel economy

• Improves performance

• Non-toxic, non-flammable, non-biocide,

non-corrosive, biodegradable, & pH neutral

available sizes

250ML, 500ML for accurate dispensing

1 LITRE 5 LITRE 20 LITRE

200 LITRE 1000 LITRE

For large quantities and Auto dosing

Prevention, better than cure!

naturally safe

FCC is pH neutral and contains no

hydrocarbons, sulphur, phosphorous,

nitrogen or metallic ingredients.

It is nontoxic, non-hazardous and

non-flammable.

Under normal conditions of combustion

it will burn to form CO2 (carbon dioxide)

and H2O (water).

Used in hydrocarbon and Bio-fuels it

causes the fuel to burn more efficiently,

thereby reducing harmful emissions.

effect on emissions with FCC

Nitrous oxides: No effect

Carbon emissions: FCC will significantly

reduce HC

( unburnt hydrocarbons)

Carbon monoxide: CO will reduce as the

cleaner burn means that a

higher conversion to CO2 will occur in

the combustion

chamber rather than in the atmosphere.

CO2 will

increase due to the reduction in CO

Sulphur: FCC will not allow sulphur to

form sulphurous acids.

This has a less detrimental effect on

the environment

Supplied by:

JCK DISTRIBUTORS Pty Ltd

+ 61 (08) 9403 0699

[email protected]

www.jckdistributors.com.au

3

brief technical Specifications

Composition: Blend of non-toxic

chemicals

Appearance: Clear, green mobile

liquid

Odour: Eucalyptus

Poisons schedule: Non-toxic

Pot life: Indefinite

Flammability: Non -flammable

pH: Neutral

Safety: Environmentally responsible

costs / benefits

In addition to the intangible benefits

to FCC such as reduction in emissions,

extension of filter life and reduction in

downtime, FCC field tests in Europe,

Canada, Australia and Malaysia have

all indicated significant savings on fuel,

which far outweigh the cost of

purchase of the product

at a glance

• Economical 4000:1 mix ratio

• Treats all fuels – petrol, diesel, gasoil, Bio-

fuels, two stroke & heating oil

• Suitable for all engines

• Removes water from fuel systems

• Kills & removes the Diesel Bug –

no more blocked filters

• Cleans injectors & jets - removes gums,

waxes, resins and acids

• Removes carbon build up

• Reduces harmful exhaust emissions & black

smoke

• Prolongs the life of catalytic converters and

EGR SYSTEMS from malfunctioning

• Reduces expensive maintenance &

downtime

• Restores lost fuel economy

• Improves performance

• Non-toxic, non-flammable, non-biocide,

non-corrosive, biodegradable, & pH neutral

mailto:[email protected]

http://www.jckdistributors.com.au/

FCC is a complete fuel

conditioner blended with

magnesium providing

comprehensive protection of

the heavy fuel oil systems

which results in reductions in

running and maintenance

costs.

Product application

Designed and formulated to

treat all forms of Heavy Fuel

Oil

Suitable for gas turbines

Eliminates corrosive vanadium

deposits

As effective as FCC is cleaning

out the complete fuel system

Easy to use

Economical rate of 1:4000

To be blended with the service

tanks

Auto dosing systems can be

retrofitted

Vanadium molten deposits

Corrosion initiates from the

Vanadium in the fuel which forms a

low melt glaze during combustion

with other metals in the fuel like

sodium, aluminium, iron, as well as

sulfur and oxygen. These low melt

glasslike compounds not only

corrode equipment but prevent

heat transfer to water in tubes.

Additionally these low-melt

compounds form a hard glaze

when they cool that make cleaning

very difficult.

These corrosive vanadium

compounds reduce efficiency in

heat transfer, resulting in lost BTU's

and a more costly power output.

Treating Vanadium deposits

Testing results using FCC-V has

evidenced that at the correct

dosage and specifications, this

corrosion can be prevented. FCC-V

creates a vanadium compound

during combustion that has a higher

melting point and is noncorrosive,

giving a more complete combustion

and eliminate the black smoke from

exiting the stacks and thereby lead

to less toxic environmental

emissions, greater and more

effective and efficient fuel and plant

operations

Available sizes

100 LITRE


4

Supplied by:


+ 61 (08) 9403 0699

[email protected]




SURE KLEEN

powerful phosphate

free citrus based

detergent degreaser

SURE KLEEN is a super

powerful quick breaking

detergent degreaser. Sure

kleen solvents are derived

from citrus fruits and it’s

regarded by many as the

best in its class.

Suited for a variety of

Mining and workshop

applications this safe

degreaser is incredibly

diverse and safe to use

Non toxic, non caustic, non

flammable, bio-degradable,

phosphate free and

environmentally friendly.

Available sizes

5 LITRE 20 LITRE

200 LITRE 1000

LITRE

Supplied by:


+ 61 (08) 9403 0699

[email protected]


5

Product application

Ideally suited for use in all

Automotive and Industrial

applications requiring a heavy

duty all purpose cleaner.

Can be used for the removal of

all oil and grease residues on

floors, walls, vehicles,

locomotives, stationary engines

and compressors trucks etc

Suited to Australian mining

conditions, will not separate.

easy to use May be diluted for brushing.

Suitable for use in spray

applicator.

Can be used in high pressure

cleaners

Not classified as dangerous

Dilution rates as follows:

Heavy Degreasing – 1:10 parts

water.

Medium Cleaning – 1:50 parts

water.

Light Cleaning – 1:100 parts

water.



EXIT GREASE

EXIT GREASE is a non caustic, water soluble heavy duty and general purpose cleaner for the safe removal of grease and oil. Formulated without solvents or phosphates, it is non toxic and non flammable. A leader in the field of environmentally safe degreasers


EXIT GREASE can be used on workshop

floors, factory walls and bench tops.

Used in transmission centres, mechanical

workshops, loco yards, and rolling

stock.

Approved for use in food preparation

areas, safe to use in kitchens hot plates,

bathrooms showers and toilets.

Formulated without perfumes so it will

not taint food.

easy to use

Applied by spray, exit grease penetrates

deeply

For heavy grease apply by brush and

allow 5 minutes for the product to

penetrate

Can also be used in a soak tank

EXIT GREASE can be diluted right down

to 50:1

technical specifications Composition: Quaternary

ammonium compounds, biodegradable surfactants and water

Treatment: Apply neat or diluted as required. For heavy grease apply neat, leave for 5 minutes, and then remove with a high pressure water jet.

Flammability: Non flammable Flash point: N/A Poisons: Non-toxic

EXIT GREASE is non-toxic non-caustic

and solvent free degreaser, therefore

safe to use around workshops as well

as kitchens.

Water soluble and formulated with bio

degradable surfactants, it is not only

safe to use, it will not harm surfaces or

the environment. Registered as safe to

use in food prep areas

at a glance

Heavy industrial to light domestic

uses

Environmentally responsible

Safe to use and to store

Non caustic and solvent free

Will not harm surfaces

Suitable for use in food preparation

areas

6

Available sizes

5 LITRE 20 LITRE


Supplied by:


+ 61 (08) 9403 0699

[email protected]




BIG WASH

We have developed Big

Wash as a diverse heavy

duty detergent for cleaning

farm machinery, trucks, buses

and cars.

It’s a highly efficient streak

free cleaner

easy to use

Easy to use – Big Wash

quickly removes hardened

on dirt and grime.

Hose away all loose dirt

before washing. Dilute Big

Wash at a rate of about

50mls per litre – a more

concentrated mix may be

needed for very heavy

soilage.

A HEAVY-DUTY

ECONOMICAL

DETERGENT FOR BIG

JOBS

DEVELOPED FOR AUSTRALIAN

WORKING CONDITIONS

Big Wash has been developed in

Australia as a heavy-duty cleaner

designed to deal with the toughest

grime and dirt.

It’s not caustic and contains no

solvents or phosphates – but its

powerful foam has an unbeatable

combination of surface action agents

and emulsifiers.

As a degreasing detergent for those

big jobs it’s in a league of its own –

yet it’s completely biodegradable

and safe to use.


Big Wash is ideal for:

Manual washing

Pressure washers

Foam guns

Steam cleaners

Car-wash systems

7

Available sizes

5 LITRE 20 LITRE


Supplied by:


+ 61 (08) 9403 0699 [email protected] www.jckdistributors.com.au



B.A.R.C. BITUMEN &

ASPHALT REMOVER &

CLEANER

New technology allows low volatility

products derived from alternative

sustainable sources to produce superior

results without the traditionally

accepted risks.

This technology is now available to

address the environmental issues

surrounding the removal of bitumen

and asphalt

technical specifications

Derived primarily from natural edible

plant oils, and are free of VOC and the

customary traditional solvents

MSDS available on request

how it works

BARC has a similar molecular

structure to bitumen, resulting in

the rapid penetration of the

bitumen down to the adhered

surface. Spreading itself between the

bitumen and the surface it

effectively lifts the bitumen from

the surface.

Holding the particles in solution

allows them to be removed to

waste or can be separated, allowing

the Bitumen to be recycled

Being chemically similar allows the

bitumen to dissolve in the BARC.

Once rinsed off it leaves behind a

film that makes for easier

subsequent cleaning.

As a direct superior replacement for

Kerosene/diesel it not only speeds

up the whole cleaning action, it

makes it easier the next time around

too and so making effective savings

in labour and downtime

8

naturally safe

Performance exceeds the effectiveness

of hydrocarbon based bitumen and

asphalt removers.

The main difference being that

BARC’s solvents are derived from

edible plant oils and are regarded by

many of its users as the best in its

class.

Non Toxic, Hydrocarbon Free. Non

Caustic, Non Flammable,

Bio-degradable, environmentally

friendly, Non carcinogenic

Microbial action effectively reduces

the waste to a non polluting product

at a glance

multiple uses

heavy industrial to home use

environmentally responsible

non-hazardous

powerful plant derived bitumen

remover

coats as well as cleans

safe and easy to use

odourless, non flammable

easy to use

Best results have been achieved

once dust and mud have been

removed and the surface

allowed to dry.

Then 1) apply BARC with a hand

held pressure sprayer and allow

to penetrate for 15 to 20

minutes.

2) Rinse off with a high pressure

spray preferably using hot water.

3) Heavily encrusted areas may

need a second application to

allow BARC to penetrate fully.


Formulated specifically to

remove Bitumen and Asphalt.

To be used on all Equipment

associated with the application

of bitumen and asphalt

Also removes bitumen from

concrete, paving’s, kerbs and

brick

Workshop floors and bench

tops. Can be used for coating as

well as cleaning equipment

9

Supplied by:


+ 61 (08) 9403 0699

[email protected]


Available sizes

5 LITRE 20 LITRE




LOAD RELEASE

Load Release is a highly effective and

safe release agent, when applied it

assists on the release of bitumen as well

as extending the period between

having to clean the tray

New technology allows low volatility

products derived from alternative

sustainable sources to produce superior

results without the traditionally

accepted risks.

This technology is now available to

replace diesel and kerosene as a release

agent

how it works

Load Release is a completely bio

degradable alternative, the

application of Load Release

provides an active film designed

specifically to reduce the adhesion

of concrete, asphalt and bitumen

to surfaces by allowing it to slide

over the surface

easy to use

Ideally surfaces to be treated

should be free of bitumen, asphalt,

cement, concrete

or laterite/sand. In the case of

bitumen/asphalt we recommend

the use of B.A.R.C. Bitumen

remover.

Once the surface is clean apply

Load release using a low pressure

sprayer evenly over surfaces

needing protection in much the

same process as applying diesel

technical specifications

Derived primarily from natural edible

plant oils, and are free of VOC and the

customary traditional solvents

MSDS available on request

10

naturally safe

Unlike current anti adhesion products

Load Release is fully degradable both

chemically and biologically and poses

no hazard to the environment. It

provides a source of nutrition to

natural microorganisms in both water

and soil and will be degraded to

harmless molecules within a very

short time scale.

- is 100% biodegradable.

- is coloured so that even distribution

is achieved and not area missed

- There is no requirement for specialist

ventilation as there are no

carcinogenic fumes.

at a glance

safe and easy to use.

long lasting

100% biodegradable

Even coverage can be

achieved.

Very low levels of

contamination with asphalt

No degradation of asphalt

or concrete.

non-volatile.

Reduces cleaning costs

non flammable


Designed specifically for an anti

adhesion treatment Load Release

may be used on many surfaces to

prevent oily sticky materials from

adhering.

Its main application is for use on

vehicles carrying asphalt or

bitumen where it is sprayed onto a

previously cleaned surface.

All other equipment used for

spreading or applying asphalt or

bitumen can be pre-treated to

allow faster and more effective

cleaning with B.A.R.C.

Applying a coating of Load Release

can protect surfaces adjoining an

area to be asphalted, kerbs for

example; it is also particularly

useful for concrete shuttering

allowing a smooth release.

available sizes

200 LITRES / 1000 LITRES>

Supplied by:


+ 61 (08) 9403 0699

[email protected]


11



DUST

CONTROL

the solution:

Dust Control is a blend of

organic Ingredients that bind

dust particles for a considerable

period.

Dust Control can last for 12

months before re-application

Extremely cost effective

application:

Dust Control is sprayed over the area

at a rate of approximately one litre per

metre square using pressure or gravity

fed sprays on truck/tractor drawn

tankers.

For smaller areas use a

backpack spray or similar.

There is no

requirement to use

a daily watering

programme 12

Supplied by:


+ 61 (08) 9403 0699

[email protected]


Dust control is a 100%

environmentally safe and

completely biodegradable

technology.

IT is comprised of recycled organic

ingredients that once applied will

provide up to a 12 montth solution

to hazardous and disruptive dust

and particle iussues.

This cost effective method of

binding and surpressing the dust

results in working conditions

becoming workable and safe where

they were once hazardous

the problem:

Irritating conditions

Hazardous

Impairs Equipment

Disruptive to business

Affects Animals and people

Costly to control

Available sizes

200 LITRES / 1000 LITRES>



CORRO DIP

THE SAFE CORROSION

TREATMENT

Technical properties

Dilution: 5:1

Appearance Brown liquid

Odour Slight odour

Foam Slight

pH @ 1% 5.0-5.5

Environmental Data

Biodegradable, Iron content

dictates disposal

Easy to use

Dilute 5:1

Into a container, pour a sufficient amount

of CORRODIP ™ to completely cover

the rusted object

Immerse the rusty object in the solution

and leave it for 10 minutes for light rust

or overnight for extremely heavy rust.

CORRODIP™ has been proven

effective to remove even deep rust on

all types of mild steel and iron. It is

safe on all surfaces and will not harm

copper, brass, aluminum, plastic,

rubber or vinyl. CORRODIP™ is non-

toxic, non-corrosive, and

biodegradable and contains no acids

or alkalis. It is non-flammable and

contains no petroleum solvents.

Rapidly removes rust from ferrous

metal and stainless steel.

Available sizes

5 LITRE 20 LITRE

200 LITRE 1000

LITRE

Supplied by:


+ 61 (08) 9403 0699

[email protected]


13

at a glance

Non-toxic

No Fumes or bad odours

Biodegradable

Environmentally Safe

Non flammable

Non- corrosive

Will not harm un-rusted steel

Safe on other metals

Excellent rust effortlessly in

minutes

Contains no acids, Alkalis or

solvents

Will not affect rubber, plastic,

PVC, Copper, Brass Aluminium

or vinyl



PHOSBRITE

Phosbrite a mild acid, rust and scale remover

also used to brighten up aluminium and stainless

steel

product application

efficient for the removal of rust stains from paint

and metal

toilet cleaner and descaler of shower surrounds and

lime scale on glass

cleans and brightens metals such as aluminium and

stainless steel

easy to use

for rust scale remover dilute by 1:4 depending on

degree of rust/scale, wire brush first to remove loose

material apply phosbrite with brush spray or by

soaking, agitate with brush or wire wool. Rinse off, to

reduce further rusting spray surface with a 2% dilution

to leave a passivating layer of protection

for glazed tiles, toilets, baths basins, concrete and

terrazzo and for brightening aluminium and stainless

steel, dilute 10:1 and allow to soak for at least 10

minutes, agitate if possible then rinse off thoroughly

with water

technical specification

Phosphoric acid

Rust inhibitors

Non ionic surfactants

Supplied by:


+ 61 (08) 9403 0699

[email protected]


Available sizes

5 LITRE 20 LITRE


14



CITRUS CLEAN

Citrus Clean a highly effective hand cleaner

containing fine pumice to clean deeply.

product application

citrus clean is a natural, pH balanced

hand cleaner and contains no

petroleum solvents

the active ingredient is d-limonene a natural solvent

derived from citrus has a fresh citrus fragrance

effective on grease, grime, inks, gasket cements, glues

and epoxies.

can be used without water, will not clog drains, can

be dispensed using a simple drum pump.

withstands all weather conditions without separation

contains a fine pumice which cleans deep into pores

with a gentle action that does not scratch.

Leaves hands smooth and non sticky

easy to use

take a small amount and using no water rub into

hands, wrists arms etc until dirt and grease are

dissolved . wipe dry or rinse off with water

20 L drum includes a high volume hand pump

15

Supplied by:


+ 61 (08) 9403 0699

[email protected]


Available sizes

5 LITRE 20 LITRE

Different dispensers can

be supplied upon

inquiry



Product Data Sheet

Anti-Spatter

FEATURES: • Biodegradable

• Non Toxic

• Non Carcinogenic

• Non Flammable

• No Methylene Chloride

• No Silicones

• Ideal for confined spaces

• Does not affect galvanisingprocess

• Test welds meet StandardAS/NZS 1554.1 2004 Category SP

PACK SIZES: • 750ml Spray Pack

• 5 Litre Jerry Can

USES:

• Welding anti-spatter for mig and arc welding

• Lubricant for cutting, tapping, drilling and pressing

• Corrosion and spatter protection of welding beds, robots and spot welders

• Preserver of leather gloves and aprons

• Welding nozzle protection

• Does not contain any silicones which will cause problems with painting the finished work

PHYSICAL PROPERTIES:

• Appearance: Light brown liquid with

distinctive wool fleece and solvent odour

• Boiling Point/Range:110-250

• Flash Point: 93.5°C

• Specific Gravity: 081-0.83 @ 20°C

• Solubility in Water: Very Low

• Viscosity: 12.50 cSt @ 25

°C

°C

CONTENTS: Lanolin, blended with non-regulated,non-ozone depleting paraffincarriers.

NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus

Contact Details for further information:

For safe handling of this product, please consult the

product material safety data sheet (MSDS)

Controlled Document - LAN00012-AS | Version 4.2 May 2013

[AS\SP-0750]

[AS\0005]

STORAGE & TRANSPORT:

• Lanotec Anti-Spatter is not classified asDangerous Goods

• Keep in cool, dry, well ventilated place

• Keep out of reach of children

Paul

Typewriter

Ph:+61 (08) 9403 0699 Fax:+61 (08) 9403 0799 E: [email protected]

Paul

Typewriter

PREPARATION:

• Lanotec Anti-Spatter will give best results when applied to a clean, dry surface.

• It is understood that not all areas can be cleaned or dried before application, but the applicationof Anti-Spatter will give far more benefits on a dirty surface than not applying Anti-Spatter at all.

• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.

• A light spray over the work and/or jig will prevent welding spatter sticking to the surface. A simplewipe with a cloth or rub with a wire brush will remove all spatter.

• Anti-Spatter may be pre-applied to parts and will act as a rust preventative as long as the productis not cleaned off the parts.

• Application of Lanotec Anti-Spatter to gloves and aprons will dramatically increase the life ofboth.

• Apply product sparingly, using the hand spray bottle. Spray over area to be protected. In mostcases one pump of the hand sprayer containing Lanotec Anti-Spatter will be sufficient to protectthe area coated.

• When applying to objects via spray, hold 30cm away from object. Start from the top and coatevenly from one side to the other.

• When coating vertical surfaces, always start at the top and work down using the same mistingtechnique.

• Coverage is approximately 20m² per litre. Only one coat is required.

REMOVAL:

• Where removal is necessary any strong solvent will remove Lanotec Anti-Spatter.

• Lanotec recommends the use of Lanotec Citra-Force or Lanotec PowaWash.

• Does not require removal for products to be galvanised. It is removed in the galvanising process.

Always read entire label before using product

Product Data Sheet

Anti-Spatter





APPLICATION:

Controlled Document - LAN00012-AS | Version 4.2 May 2013

Paul

Typewriter


Product Data Sheet

Citra-Force


• Derived from natural ingredients

•

• Water Soluble

Non Conductive to 22kV

• Will not affect pH

• Fresh citrus odour

PACK SIZES: • 400g Aerosol

• 750ml Spray Pack



• 20 Litre Cube

• 200 Litre Drum

CONTENTS: A citrus based liquid, blended withadditives to enable emulsificationwith water

USES:

• A powerful, all purpose, natural cleaner/degreaser concentrate

• Formulated to remove Lanotec lanolin based products

• Removal of thread dope from drill rods and casing

• Cleaning of electrical components and the decarbonisation of electric motors and windings

• A quick break degreaser, safe for biocycles

• Removal of waxes, adhesives, glues, lanolin, fats, grease, oils, carbon build up, chewing gum &acrylic paint overspray

• Cleaning of stainless steel & aluminium

• Cleaning of showers, toilets sinks, BBQ’s, pet stables, amenities, commercial ovens and exhaustcanopies (food grade)

Caution: Citra-Force affects certain polymers, do not use on rubber or plastics before testing on aninconspicuous area


• Appearance: Yellow-orange liquid

• Boiling Point: Approx. 176-300°C

• Flash Point: 55°C

• Specific Gravity: 0.85 @ 20°C

• Solubility in Water: Emulsifies

• Viscosity: 10.50 cSt @ 25 °C





Controlled Document - LAN00012-CF | Version 4.2 May 2013

[CF\PP-0400]

[CF\SP-0750]

[CF\0001]

[CF\0005]

[CF\0020]

[CF\0200]

• Citra-Force is classified as DangerousGoods

• Store in accordance to local legislation ofDangerous Goods




Paul

Typewriter


Product Data Sheet

Citra-Force

APPROVALS:• AQIS Acceptaice of Chemical Compound for use in Export Meat Establishments -

Category 3 Cleaner Type C

• NZFSA Approval Cleaner/Degreaser C32

• Halal Certification Authority Australia - Taher Accreditation





APPLICATION GUIDE:

• Depending on the thickness and age of the build up.

• Remove any large build up by manually scraping where possible before applying Citra-Force.

• Apply Citra-Force directly to the contaminant to be removed, leave between 5 and 15 minutes,

and high pressure clean the affected area.

• For small electrical windings, spray on neat, leave for 15 minutes, and high pressure clean off.

• For large windings where carbon is not visible and embedded in the armature, dilute at 1:10

parts water in suitable tank and immerse motor and aerate for 24 hours. Remove and clean, then

check and resubmerge if necessary. Does not affect the varnish, and is non foaming.

• Spray on affected area, wipe clean with a damp cloth.

• Suitable for kitchen counters, floors, walls, bathrooms, range hoods, drains, grease traps and

overhead filters in commercial and domestic kitchens.

• Spray Citra-Force neat onto area, allow to stand for 5-10 minutes.

• Rub or scrape until adhesive is removed. Repeat as needed.

• Citra-Force is suitable for cleaning as it has a neutral pH.

• Spray on to area requiring cleaning, use clean cloth to dry.

• Spray on affected area neat, within 3 minutes work in with stiff bristled broom.

• For best results use a hot high pressure cleaner to remove.

• Spray Citra-Force neat onto threaded area with dope/anti-seize build up.

• Use coconut brush or similar to work product into threads, wipe residue off with clean rag.

• Does not affect the graph

rinse if required,

• Work on areas of less than 3m² at a time.

.

Controlled Document - LAN00012-CF | Version 4.2 May 2013

Machinery and Automotive Degreasing - [Neat - 1:5 parts water]

Decarbonising Electrical Rewinds - [Neat - 1:10 parts water]

General Purpose Cleaning - [1:5 - 1:20 parts water]

Adhesive Removal - [Neat]

Stainless Steel and Aluminium - [Neat - 1:5 parts water]

Bitumen removal - [Neat]

Thread Dope and Anti Seize Removal - [Neat]

Paul

Typewriter

Paul

Typewriter


Product Data SheetGeneral Purpose Liquid Lanolin


• Non Toxic


• Non Evaporative

• Hermetically seals surface

• Resists wash off

• Non Conductive to 70kV




• 20 Litre Cube

CONTENTS: Lanolin, blended with an evaporativecarrier to enable ease of applicationand enhance penetration

USES:

• Penetrant, frees up rusted parts

• Protects against corrosion - moisture, salt & acid resistant

• Electrical component protection including connectors, switchgear, battery terminals, circuit boards,toggle switches & boxes

• Light lubricant, suitable for locks, hinges, cables, pins & struts. Ideal air tool lube

• Rejuvenates plastics, vinyls, leather, aluminium & power coated surfaces

• Protects and frees up tools, fasteners, fittings, hinges, locks & zippers

• Internal component preservation

• Lubricant for drilling, cutting, machining & pressing



distinctive wool fleece & solvent odour



• Specific Gravity: 0.81 - 0.83 @ 24°C

• Solubility in Water: Insoluble

• Viscosity: 11.50 cSt @ 25°C

STORAGE & TRANSPORT:• Only Aerosol is classified as Dangerous

Goods

• All bulk liquids are not classified asDangerous Goods







Controlled Document - LAN00012-GP | Version 4.2 May 2013

[GP\PP-0400]

[GP\SP-0750]

[GP\0005]

[GP\0020]

Paul

Typewriter


Paul

Typewriter






PREPARATION:

• Lanotec General Purpose will give best results when applied to a clean, dry surface.

• It is understood that not all areas can be cleaned or dried before application, but the applicationof General Purpose will give far more benefits on a dirty surface than not applying GeneralPurpose at all.

• Lanotec General Purpose is soluble in oil, and therefore light oils on machined parts do not needto be removed before lubricating.

• Where short term mothballing of equipment is the ultimate aim, a good clean with a powerfuldegreaser before application of Lanotec General Purpose will give best results. Lanotecrecommends Lanotec PowaWash or Lanotec Citra-Force.

• Remove sources of ignitions, voltage and flame before use.

APPLICATION:


• Lanotec General Purpose can be applied via spray, brush, roller or lambs wool applicator.

• Lanotec provides a 750ml trigger bottle and a 1.5L pump up pressurised sprayer, for small tomedium coating jobs. For larger jobs recommended application is via a pump-up garden-typesprayer with Viton seals.

• Coverage is approximately 20m² per litre. Only one coat is required. If overapplied the coatingwill become tacky, and debris will stick to it. High pressure water blasting will remove the debrisand leave the Lanotec General Purpose behind.


• When the surface looks wet, you have applied enough product.

• Allow one hour drying time before putting equipment to use.

• If dust adhesion is undesirable, Lanotec General Purpose can be buffed to stop dust adhering.Dust and dirt adhesion is only to the protective coating, and when coating is removed equipmentwill revert back to original appearance.

REAPPLICATION:

• Reapplication is recommended every 3 months or when further lubrication is required.Reapplication is not required if stored out of direct sunlight (i.e. in a warehouse).

• Visual inspection is recommended daily until a suitable service interval has been identified.Reapply where required during service intervals.

• Wipe dirt and dust away from surface.

• Reapply as per application instructions above.



Paul

Typewriter



TESTING:

General Purpose Liquid Lanolin has been tested by independent NATA certified laboratories using

the following:

Australian Standard test methods

• AS 1580.460.2 - Resistance to Acid & Alkali - Good acid resistance

• AS 2331.3.1 - Neutral Salt Spray (Corrosion)

Other Testing

• High Voltage Testing (Energex) - dry tested to 70kV - non conductive

APPROVALS:

• HACCP Australia Food Safety Accreditation Systems - Food Grade Lubricant

• AQIS Acceptaice of Chemical Compound for use in Export Meat Establishments -

Category 12 Lubricant Type C (Aerosol)

• NZFSA Approval Lubricant C12


Category 10 Lubricant Type A (Bulk);






Paul

Typewriter


Product Data SheetHeavy Duty Liquid Lanolin


• Non Toxic


• Non Evaporative

• Hermetically seals surface

• Good resistance to mineral

acids/salts


• Non Conductive to 70kV



• 1L Spray Pack

• 5L Jerry Can

• 20L Cube

• 200L Drum

USES:

• For long lasting lubrication of moving parts in a highly corrosive environment

• Perfect for wire rope slings and all industrial chains (forklift) - non fling & non webbing

• Lubricates & protects pulleys, blocks, swivels, cables & chains

• Protection of electrical equipment including battery terminals, boxes & connectors

• Lubricates electrical cable for pulling through conduit

• Spray on anti-seize


• Appearance: Dark brown liquid with


• Boiling Range: 110-200°C





CONTENTS:





Controlled Document - LAN00012-HD | Version 4.2 May 2013

[HD\PP-0400]

[HD\SP-0750]

[HD\SP-0001]

[HD\0005]

[HD\0020]

[HD\0200]

• Only Aerosol is classified as DangerousGoods

• All bulk liquids are not classified asDangerous Goods




Lanolin, blended with an evaporativecarrier to enable ease of applicationand enhance penetration

Paul

Typewriter


Paul

Typewriter






PREPARATION:

• Lanotec Heavy Duty will give best results when applied to a clean, dry surface.

• It is understood that not all areas can be cleaned or dried before application, but the applicationof Heavy Duty will give far more benefits on a dirty surface than not applying Heavy Duty at all.

• Lanotec Heavy Duty is soluble in oil, and therefore light oils on machined parts do not need to beremoved before lubricating.


APPLICATION:


• Lanotec Heavy Duty can be applied via spray, brush, roller or lambs wool applicator.

• Lanotec provides a 750ml trigger bottle and a 1.5L pump up pressurised sprayer, for small tomedium lubrication jobs. For larger jobs recommended application is via a pump-up garden-typesprayer with Viton seals.

• When applying to objects via spray, hold 30cm away from object and apply to area requiringlubricating or protecting.

• For chains spray onto chain for one rotation only. Additional rotations will result in a waxy buildup.

• For wire ropes, spray on, then rotate rope 180 or submerge in a bath ofLanotec Heavy Duty.


• If dust adhesion is undesirable, Lanotec Heavy Duty can be buffed to stop dust adhering. Dustand dirt adhesion is only to the protective coating, and when coating is removed equipment willrevert back to original appearance.

° and spray other side;

REAPPLICATION:

• Visual inspection is recommended daily until a suitable service interval has been identified.Reapply where required during service intervals.

• On average, Lanotec Heavy Duty needs to be applied half as often as petroleum basedlubricants.

• Wipe dirt and dust away from surface.




Paul

Typewriter



TESTING:

Heavy Duty Liquid Lanolin has been tested by independent NATA certified laboratories using the

following:

Australian Standard test methods

• AS 1580.460.2 - Resistance to Acid & Alkali - Good acid resistance

• AS 2380 Clause 4.2 - Flameproof enclosure - Complies with standard

Other Testing

• High Voltage Testing (Energex) - dry tested to 70kV - non conductive

• Chemical Analysis (ETRS) - contains no heavy metals

To date Heavy Duty Liquid Lanolin has not been tested to AS 2331.3.1 - Neutral Salt Spray

(Corrosion). However as Heavy Duty Liquid Lanolin contains 40% more lanolin per litre than

General Purpose Liquid Lanolin the results given on the General Purpose Liquid Lanolin product

data sheet for this test may be taken as the minimum values to be obtained with Heavy Duty

Liquid Lanolin.

APPROVALS:





Category 10 Lubricant Type A (Bulk); Category 12 Lubricant Type C (Aerosol)






Paul

Typewriter


Product Data Sheet

Release Agent

FEATURES: • For Formwork, Precast & Tilt Panel

• Concentrate (mix with water)

• Low suction between panels

• Resists rain wash off

• Compatible with most coating systems

• Biodegradable

• Non Toxic

• Non Evaporative

• Lubricates & protects fittings

PACK SIZES: • 2.9L Jerry Can

• 5L Jerry Can

• 20L Cube

USES:

• Formwork Release Agent

• Tilt Panel Bond Breaker

• Precast Mould Oil

• Lubricant for jacks & fittings

• Corrosion protection for tubes, jacks & fittings

• Protection of assets from concrete and paint overspray


• Appearance: Dark brown liquid withdistinctive wool fleece & solvent odour


• Flash Point: 68°C; >100°C when diluted 1:6


• Solubility in Water: Emulsifiable


DILUTION GUIDE:

CONTENTS: Lanolin, blended with an evaporativecarrier & surfactant. Mixes with water





Controlled Document - LAN00012-RA | Version 4.2 May 2013

[RA\0003]

[RA\0005]

[RA\0020]

Concrete (mix @ 1:6 parts water)

Scaffolding (mix @ 1:4 parts water)

ContainerSize

Concrete@ 1:6

Scaffolding@ 1:4

2.9L 20L 15L

5L 35L 25L

20L 140L 100L

*Product is to be mixed with water

Paul

Typewriter

Paul

Typewriter

Paul

Typewriter

Paul

Typewriter

Paul

Typewriter


Paul

Typewriter

Paul

Typewriter

Paul

Typewriter

Product Data Sheet

Release Agent





Controlled Document - LAN00012-RA | Version 4.2 May 2013

PREPARATION:

• Shake or stir Lanotec Release Agent concentrate to consistency before mixing with water

• Add concentrate to container then add water to achieve your desired dilution rate

• High quality sprayer recommended (Chapin brand or similar)

• For best results apply to a clean dry surface

• Apply a fine even coat with quality sprayer

• When using as a bond breaker, apply to the top of cured panel in 2 even diagonal opposingcoats. In extreme heat, the panels can be sprayed with water before Lanotec Release Agent isapplied, this reduces the amount of Release Agent absorbed by the cured panel

• If it rains after application, feel for waxy surface and judge if further application is required

• Continued use on formwork leaves surface clean after stripping; no cleaning required betweenpours, simply spray, pour, strip and repeat

• For best results, apply to the horizontal before erection (steel & aluminium) where practical

• Non staining for coloured concrete

• Can be applied after setting polystyrene block outs (does not affect polystyrene)

• If mopping the finish, use a new clean mop pre soaked in Lanotec Release Agent

• Safe for fibreglass, PVC, polypropylene and rubber moulds

• High performance for bullnose moulds

• Flush sprayer with water only


Tilt Panel

Formwork

Precast

COATINGS:

APPLICATION:

• Lanotec Release Agent degrades in the curing process of concrete

• If used to manufacturer specifications, chemical cleaning of theconcrete is not required before applying a coating system. High pressure water blast is all that isrequired for best results

• Adhesion testing as per AS 1580.408 indicates that Lanotec Release Agent did not causeadhesion failure of the coating systems at the coating/concrete interface of coating systems tothe cured concrete. For further information in regards to this please contact Lanotec Australia

Lanotec Release Agent is

Paul

Typewriter


Product Data Sheet

Timber Seal


• Non Toxic


• Clear colour - highlights the grain

• Sprayable - save time


• Keeps timber nourished & supple

PACK SIZES: • 5L Jerry Can

• 20L Cube

USES:

• For dressed timber including decking & outdoor furniture

splitting &• Prevention of drying, cracking, wood rot

• For weatherproofing and highlighting natural grain

• For a natural matt finish

• Corrosion protection of metal fastenings & fittings


• Appearance: Light brown liquid withdistinctive wool fleece & solvent odour

• Boiling Point/Range: 110-250°C





CONTENTS: A blend of lanolin and an evaporativecarrier, with UV stabilisers andanti-fungal/anti-mould treatment





Controlled Document - LAN00012-TS | Version 4.2 May 2013

[TS\0005]

[TS\0020]

STORAGE & TRANSPORT:• All sizes are not classified as Dangerous

Goods



Hardwood NEW 10-15m²/L

Hardwood OLD 8-10m²/L

Softwood NEW 8-10m²/L

Softwood OLD 6-8m²/L

COVERAGE GUIDE:

• Approximate only

Paul

Typewriter


Paul

Typewriter

Product Data Sheet

Timber Seal

PREPARATION:

• All new (green) timber structures should be allowed to settle for a minimum of 3 months beforeapplying any coating system. If treated before this, there is a risk of resins and tannins rising tothe surface, causing black spots.

• If the timber is freshly milled or “green”, only apply inside joints and on bolts and fastenings.Allow timber to weather further before applying Timber Seal.

• Previously untreated timber should be treated against mould and/or fungus spores (use anybroad spectrum agent) before applying Timber Seal.

• High levels of tannin and oily resins or high moisture content in the timber will affect thepenetration rate of Timber Seal which can lead to a poor finish of the coated surface. It isimportant that the timber is clean and dry before applying Timber Seal.

• Can be used on timber previously coated with decking oil. Timber must be showing signs ofdryness before applying Timber Seal.

• If the timber has turned grey due to weathering, sand surface lightly and clean thoroughly beforeapplying Timber Seal. To restore colour without sanding, see below in regards to using tint.

• Ensure timber is dry, and free of dirt & dust before applying Lanotec Timber Seal - High pressureclean then leave 24 hours to dry.

APPLICATION:


• Refer to coverage guide. Measure area of timber to be protected. Only use the recommendedvolume of product. Over application will cause tackiness on the surface of the timber.

• For decking surfaces and other dressed timber, Timber Seal is best applied by spraying via agarden type sprayer. A flat lamb’s wool applicator may be used to evenly spread the appliedproduct. For the underside of external decking and structural timbers, apply by spray, preferablyprior to construction.

• The final coat of exposed dressed timber surface can be polished/buffed to the natural wax toremove residue, maximise the protective seal and to highlight the natural grains.

• 6 hours drying time is recommended.

• Lanotec Timber Seal is compatible with most oil based tints, if the timber is dry it will accept a tintmixed into the Timber Seal at a rate of 2.5% (25ml per 1L). However it is advisable to conduct apenetration test with an off-cut or in an inconspicuous area first.

• Timber Seal is not compatible with acrylic water based products.

• For best results use Lanotec Type A Grease on end grains; and all fasteners - to lubricate thefastener, and to seal the hole.







dry time

Citra

-Forc

e

Paul

Typewriter


Product Data Sheet

Timber Seal

REAPPLICATION:

• A simple water test should be carried out on previously treated structure. If the water beads, thetimber is still protected. If the water is absorbed, reapplication is required.

• Typically an annual reapplication is all that is required; although two applications isrecommended in the first 12 months, to ensure adequate build up below the surface of the timber(as lanolin has an accumulative effect).

CLEANUP & CLEANING:

• Use Lanotec Citra-Force or mineral turps. For cleaning decks use warm soapy water.

• If Timber Seal is over applied resulting in a tacky surface, the excess can be cleanedoff using a solvent or degreaser. Lanotec Citra-Force at 1:10 parts luke warm water isideal for this purpose.







Paul

Typewriter


Product Data Sheet

Timber Seal PLUS


• Non Toxic


• Non Evaporative


• Sprayable - save time

• Can be used in environmentally

sensitive areas

• Keeps timber nourished & supple

PACK SIZES: • 20L Cube

USES:

• Formulated for rough sawn timber only

• Perfect for boardwalks, bridges, jetties and wharf infrastructure

• Penetrates timber surfaces

• Prevents drying, wood rot & splitting

• Weatherproofs timber

• Prevents corrosion of metal fastenings & fittings

• Note: Timber Seal PLUS is not recommended for dressed timber including domestic decking

& furniture. Please use Lanotec Timber Seal for any dressed timber applications.


• Appearance: Light brown liquid withdistinctive wool fleece & solvent odour


• Flash Point: 67.5°C




CONTENTS: A blend of lanolin and paraffiniccarrier solvents, with UV stabilisersand anti-fungal/anti-mould treatment





Controlled Document - LAN00012-TSP | Version 4.2 May 2013

[TS\P020]


• Timber Seal PLUS is not classified asDangerous Goods



COVERAGE GUIDE:

• Approximately 5m² to 6m² / litre

Paul

Typewriter


Product Data Sheet

Timber Seal PLUS

APPLICATION GUIDE:

• Previously untreated timber must be treated against mould and/or fungus spores (use any broadspectrum agent) before applying Timber Seal PLUS.

• If the timber is freshly milled or “green”, only apply inside joints and on bolts and fastenings.Allow timber to weather further before applying Timber Seal PLUS.

• Can be used on timber previously coated with decking oil. Timber must be showing signs ofdryness before applying Timber Seal PLUS.

• If the timber has turned grey due to weathering, sand surface lightly and clean thoroughly beforeapplying Timber Seal PLUS. To restore colour without sanding, see below in regards to using tint.

• The moisture content of the timber will also affect the rate of absorption, which can lead to apatchy colouring of the timber. High levels of tannin and oil resins can also lead to this effect.Therefore it is important that the timber is as clean and dry as reasonably possible beforeapplying Timber Seal PLUS.





Always read entire label before using productPREPARATION:


• Refer to coverage guide. Measure area of timber to be protected. Only use the recommendedvolume of product. Over application will cause tackiness on the surface of the timber.

• All timbers are different and display differing rates of absorption, i.e. hardwoods are lessabsorbent than softwood such as pine. This should be taken into consideration when determiningcoverage rate.

• For the best results Timber Seal PLUS should be applied to clean, dry surfaces, by a garden-type sprayer or roller.

• Lanotec Timber Seal PLUS is compatible with most oil based tints, if the timber is dry it willaccept a tint mixed into the Timber Seal PLUS at a rate of 5%. However it is advisable to conducta penetration test with an off-cut or in an inconspicuous area first.

.

Controlled Document - LAN00012-TSP | Version 4.2 May 2013

ROUGH SAWN TIMBER (GENERAL & MAJOR CONSTRUCTION):

Construction Stage:

Finishing Stage:

• Spray Lanotec Timber Seal PLUS on bearers, joists, end grains, checkouts, drill holes etc beforeassembly. For base plates, large bearers (e.g. Wharves and timber bridges), bollard capping andthreaded rods and bolts use Lanotec Type A Grease.

• Timber Seal PLUS and Lanotec Type A Grease can be easily combinedto produce a slurry that overcomes application problems in cold weather.

• Apply one coat of Timber Seal PLUS using a direct spray method to minimise overspray, orlambs wool roller. Allow six hours before walking on structure.

Paul

Typewriter


Product Data Sheet

Type A Grease

FEATURES: • Non Perishing to rubber

• Stops galling & binding

• Di-electric properties to 70kV

• Food Grade

• Long-term Biodegradable

• Non Toxic


• Non Leaching

• Acid & Salt Resistant

PACK SIZES: • 250ml Tube

• 235ml Tub

• 500ml Tub

• 1 Litre Pail

• 4 Litre Pail

• 20 Litre Pail

USES:

• Anti-seize for threaded rod, nuts & bolts

• Assembly lubricant

• Wire rope lubrication and corrosion protection

• Lubricant for rubber hoses, linkages, pivot pins & bushes

• Stops electrolysis due to similar metals

• Belt dressing

• Corrosion & moisture proofing for multi-pin connectors

• Prevents galling of stainless steel and aluminium


• Appearance: Light brown coloured solid

• Boiling Point: Approx. >250°C

• Flash Point: >200°C



CONTENTS: Pure industrial grade lanolin





Controlled Document - LAN00012-GS | Version 4.2 May 2013

[GS\250T]

[GS\0235]

[GS\0500]

[GS\0001]

[GS\0004]

[GS\0020]

• Lanotec Type A Grease is not classified asDangerous Goods

• No specific storage required


Paul

Typewriter


Product Data Sheet

Type A Grease





Controlled Document - LAN00012-GS | Version 4.2 May 2013

APPLICATION:

• Smear onto thread and underside of bolt head. Wipe off excess before tensioning.

• Fill one half of electrical plug to create moisture / dust proof barrier before reconnecting electricalconnector.

• Smear grease between dissimilar metals before tightening.

• Smear one flange face only for use as a soft seal gasket.

• Smear O-ring or seal with Type A Grease to hold in place during assembly.

• For wire rope: wipe onto wire rope by hand whilst undertaking regular inspection, or usepressurised applicator such as Masto, Viper, or Raptor.

• Apply directly to squealing belt as a belt dressing (softens and moisturises belt).

• Apply via pump or hand to all shafts and pins prone to drying out or seizing.


APPROVALS:



Category 10 Lubricant Type A



REMOVAL:

• If removal of Lanotec Type A Grease is required, Lanotec Citra-Force or Lanotec PowaWash is

recommended

Paul

Typewriter


Product Data Sheet

U.P. (Ultimate Protection)

FEATURES: • Long-term Biodegradable

• Non Toxic


• Non Evaporative

• Non Leaching

• Hermetically Seals Surface


PACK SIZES: • 750ml Spray Pack


• 20 Litre Easy Pour

• 200 Litre Drum

USES:

• Corrosion protection in harsh & highly corrosive environments

• Component storage protection

• Corrosion protection for shipping

• Mining equipment (above & below ground)

• Fertiliser & chemical storage facilities & equipment

• Agricultural vehicles including trucks, trailers and agbikes

• Corrosion protection for drill pipe and drill casing OD and ID

• 4WD underbody protection


• Appearance: Dark brown liquid with

distinctive wool fleece odour

• Boiling Point/Range: 183-500°C






CONTENTS: Enhanced lanolin blended withan evaporative carrier. Liquid thatforms a protective skin.

• Not classified as Dangerous Goods

• Non-flammable







Controlled Document - LAN00012-UP | Version 4.2 May 2013

[UP\SP-0750]

[UP\0005]

[UP\0020]

[UP\0200]

Paul

Typewriter


PREPARATION:

• Lanotec U.P. will give best results when applied to a clean, dry surface.

• It is understood that not all areas can be cleaned or dried before application, but the applicationof U.P will give far more benefits on a dirty surface than not applying U.P. at all.

• Lanotec U.P. is soluble in oil, and therefore light oils on machined parts do not need to beremoved before coating.

• Lanotec U.P. will stop surface rust in its tracks, so no need to remove surface corrosion.

• Where corrosion is intense, the removal of large chunks and flaky areas will reduce the amountof product required.

• Where long term mothballing of equipment is the ultimate aim, a good clean with a powerfuldegreaser before application of Lanotec U.P. will give best results. Lanotec recommends LanotecPowaWash or Lanotec Citra-Force.


APPLICATION:


• Lanotec U.P. can be applied via spray, brush, roller or lambs wool applicator.

• Lanotec provides a 750ml trigger bottle and a 1.5L pump up pressurised sprayer, for small tomedium coating jobs. For larger jobs recommended application is via a pump-up garden-typesprayer with Viton seals or an air-driven or air-less painting system.

• Coverage is approximately 20m² per litre. Only one coat is required. If over applied the coatingwill become tacky, and debris will stick to it. High pressure water blasting will remove the debrisand leave the Lanotec U.P. behind.


• When the surface looks wet, you have applied enough product.


• If dust adhesion is undesirable, Lanotec U.P. can be buffed to stop dust adhering. Dust and dirtadhesion is only to the protective coating, and when coating is removed equipment will revertback to original appearance.





Product Data Sheet

U.P. (Ultimate Protection)

REAPPLICATION:

• Reapplication is recommended every 12 months if outside. Reapplication is not required if storedout of direct sunlight (i.e. in a warehouse).

• Visual inspection is recommended after six months where products are stored or operating in acorrosive environment. Reapply where required during service intervals.

• High pressure clean dirt and dust from surface. Allow to dry.



Controlled Document - LAN00012-UP | Version 4.2 May 2013

Paul

Typewriter




Product Data Sheet

Wire Rope Lube

FEATURES: • Semi fluid grease

• Long-term Biodegradable

• Non Toxic


• Provides long lasting lubrication and

corrosion protection

• Penetrates to the core of the rope


PACK SIZES: • 20 Litre Pail

• 20 Litre Cube

USES:

• Suitable for all wire ropes above 16mm or any wire ropes operating in corrosive environments

• Ideal for use around waterways and coastal environments

• Lubrication of ropes in environmentally sensitive areas where salt water is an issue

• Ideal for rig and marine cranes, or any wire ropes working in the splash zone







• Viscosity: 17 cSt @ 25


°C

CONTENTS: Lanolin, blended with an evaporativecarrier to enable ease of applicationand enhance penetration



Controlled Document - LAN00012-WRL | Version 4.2 May 2013

[HW\RL20-PAIL]

[HW\RL20-CUBE]

• Lanotec Wire Rope Lube is not classified asDangerous Goods




Paul

Typewriter




Product Data Sheet

Wire Rope Lube



Controlled Document - LAN00012-WRL | Version 4.2 May 2013

PREPARATION:

• Inspect wire rope for damage by cheese cloth method.

• Lanotec Wire Rope Lube is compatible with all oil based manufacturers lubricants.

• Clean wire rope if practical for best results using wire brush or high pressure water to removeforeign debris.

APPLICATION:

• Shake or stir Lanotec Wire Rope Lube until a uniform consistency is achieved.

• Lanotec Wire Rope Lube can be sprayed when above 25

• Place catching container under lube zone to collect any spills or overflow.

• Apply enough Lanotec Wire Rope Lube to fill the valley of the wire rope only.

• Can be applied via the CoreLube 950 SER. or similar oiling system.

°C, or can also be hand applied orbrushed on at any temperature.

REAPPLICATION:

• With wire ropes over 16mm a quarterly visual inspection is recommended. Lanotec Wire RopeLube should be reapplied at this time.

• Because Lanotec Wire Rope Lube is a long lasting high performance product, it can be reappliedduring your normal wire rope lubrication service intervals.


Paul

Typewriter


Paul

Typewriter

service and support

JCK DISTRIBUTORS believe in building strong partnerships with our customers who share similar

values.

In order for this relationship to develop JCK likes to understand their customers business and their

future requirements so we can provide backup, support and customize our products to meet their

needs. We are dedicated to providing a professional knowledgeable service to our customers

backed by high performance products. Our technical sales team will work directly with you and

recommend the best product suitable for your application requirements. We pride ourselves in

continuous improvements. Long life - performance that outlasts the rest

Please contact us to see how we can assist in solving your cleaning challenges

JCK DISTRIBUTORS Tel: 61 (08) 9403 0699

46 KORELLA STREET MULLALOO PERTH WESTERN AUSTRALIA

environmentally preferred solutions


[email protected]



jck product guide

Documents

fuel tanks

fuel lines

example of fuel bug

clean fuel system

fuel storage tanks

fuel system components

complete fuel conditioner

product guide