jc-cz31 diffusion silicon temperature and pressure
TRANSCRIPT
JC Data Sheet JC-CZ31 Page 1 of 3
JC-CZ31 Diffusion Silicon Temperature and Pressure Integrated Sensor
Diffused Silicon Pressure Sensor
Introduction
Features ApplicationHigh stability, high precisionPressure range:0-40Kpa…7Mpa Wide operable temperature range -40-125℃ Compatible with corrosive media (compatible with 316L) Standard package size Typical output:0-100mV
JC-CZ31 is a temperature and pressure integrated sensor developed based on JC-CZ11 series.In terms of pressure, the series is packaged by pressure chips from internationally renowned manu-facturers. The external pressure is transmitted to the sensitive components through 316L stainless steel diaphragm and internal filling silicone oil, which can be used to measure all pressure media compatible with 316L stainless steel.In terms of temperature, we have buried a high-precision PT100 platinum resistance in the stainless steel pedestal, and potting the thermal adhesive at the gap between the platinum resistance and the stainless steel casing, greatly reducing the temperature conduction hysteresis when the plati-num resistance is not in direct contact with the medium. Each sensor was strictly temperature compensated for both zero and span.It provides two power supply options: constant current and constant voltage.
Process control Level measurements Pressure/Temperature DetectionPressure/Temperature transmitters
Specifications of current excitation(1.5mA, 25℃)
Parameters
Accuracy(%FS) Non-Linearity1 40KPa
Accuracy(%FS) Non -Linearity1 >40KPa
Hysteresis2
Repeatibility3
Zero Output(mV) 40KPa
Zero Output(mV) ≥100KPa
Span(FS) Output(mV)
Operation Temp.(℃)
Compensated
Temp.(℃)
Zero Temp.error(%FS)4
Span Temp. error(%FS)4
Temperature hysteresis(%FS)5
Long term Stability/Zero (±%FS annual)
Long term Stability/Span (±%FS annual)
Supply Current(mA)
Input Resistance(KΩ)
Output Resistance(KΩ)
Load Resistance6(MΩ)
Insulation Resistance(100V)7(MΩ)
Min.
-1.5
-1.0
70
-40
0
-10
0.5
2.0
2.5
5
100
Typical
±0.20
±0.10
±0.05
±0.05
±0.7
±0.5
±0.75
±0.75
0.1
0.1
0.1
1.5
2.5
3.0
Max.
±0.30
±0.20
±0.10
±0.10
1.5
1.0
125
50
70
±1.0
±1.0
2.0
3.0
3.7
40Kpa
≥100Kpa
JC Data Sheet JC-CZ31 Page 2 of 3
JC-CZ31 Diffusion Silicon Temperature and Pressure Integrated Sensor
Diffused Silicon Pressure Sensor
1. Best fit straight line.2. The pressure sensor performs the pressure from the minimum value to the maximum value (positive stroke) and the maximum value to the minimum value (reverse stroke), and the deviation of the output value at any pressure within the pressure range from the forward stroke to the reverse stroke;3. In the same test method as in 2, perform 3 forward and reverse stroke pressure cycles;4. Compared with the output of 25 °C in the compensation temperature range5. Zero output is the deviation value before and after the sensor performs a temperature cycle of -40~+125°C.6. Increase the load resistance to reduce the measurement error7. Between the lead and the outer casing
Specifications of voltage excitation(10VDC 25℃)
Pressure Range
Media–Pressure
Overpressure
0-40Kpa…7Mpa
2X
1.5X
Liquids and Gases compatible with 316L Stainless Steel
Parameters
Accuracy(%FS) Non-Linearity1 40KPa
Accuracy(%FS) Non -Linearity1 >40KPa
Hysteresis2
Repeatibility3
Zero Output(mV)
Span(FS) Output(mV) < 7MPa
Span(FS) Output(mV) 7MPa
Operation Temp.(℃)
Compensated
Temp.(℃)
Zero Temp.error(%FS)4
Span Temp. error(%FS)4
Temperature hysteresis(%FS)
Long term Stability/Zero (±%FS annual)
Long term Stability/Span (±%FS annual)
Supply Voltage(VDC)
Input Resistance(KΩ)
Output Resistance(KΩ)
Load Resistance6(MΩ)
Insulation Resistance(100V)7(MΩ)
Min.
-2
98
147
-40
0
-10
6
2.5
5
100
Typical
±0.20
±0.10
±0.05
±0.05
±1
100±1
150±1.5
±0.75
±1.0
0.1
0.1
0.1
10
8
3
Max.
±0.30
±0.20
±0.10
±0.10
2
102
153
125
50
70
±1.0
±1.2
14
10
3.7
40Kpa
≥100Kpa
≤4Mpa
7Mpa
PT100 temperature/Resistance Correspondence TableTemperature(℃)
-50
0
50
100
150
Resistance(KΩ)
80.31
100
119.4
138.51
157.33
PT100 Resistance Component error
B
GradeZero-degreeresistanceerror (%)
Temperatureerror (℃)
Temperature coefficient TCR error
(ohm/ohm/℃)
±0.12 ±(0.30+0.005 T ) 0.003851±0.000012
Remark
JC-CZ31 Diffusion Silicon Temperature and Pressure Integrated Sensor
JC Data Sheet JC-CZ31 Page 3 of 3
Specifications subject to change without notice. All rights reserved. All corporate names and trademarks stated herein are the property of their respective companies.
Diffused Silicon Pressure Sensor
Nanjing Jiucheng Technology Co.,Limited.
Room 612, Building 1, Business Space Plaza, No. 2, Jinyuan Road, Dongshan Street,Jiangning District, Nanjing, Jiangsu, China
www.jcsensor.net
Note: 1. Can be used for down-range, and the amplitude is controlled within ±50%FS.2. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.3. The commonly used compensation method for products is 1.5mA constant current compensation.4. Do not force to pull the pins or the leads of sensitive components.5. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.6. If you have special requirements on product performance parameters and functions, please contact us.
Pressure type
Gauge
Absolute
Seal Gauge
Electrical
Pressure signal: Ribbon Cable 90mm
Temp. signal: Silicone wire
Customized
Customized
Ordering InformationJC-CZ31 Pressure sensor
Model
JC-CZ31
Description
Diameter 19mm Diffusion Silicon Temperature and Pressure Integrated Sensor
Power Supply
Constant current
Constant Voltage
Gauge
*
*
*
*
*
*
*
*
*
*
Absolute
*
*
*
*
*
*
*
*
*
Pressure Range
0-40KPa
0-100KPa
0-160KPa
0-400KPa
0-600KPa
0-1MPa
0-1.6MPa
0-2.5MPa
0-4MPa
0~7MPa
2
PT100Thermal Adhesive
1.0PT100(Blue)
Constant V-Voltage
12.7
Sealing Ring (Butane) ф1.61.8
5.0
2.5 90±10
Vent Hole ф1.6(Optional)
Diaphragm
1.27
+0-0.05 ф18.97
2.2
Out+(RED)EX-
EX+Out-XX
XXX
XXXX
X
S/N
Laswer letteringX X X X X
Power Supply: C-Constant Current
Pressure Mode:G-GaugeA-AbsoluteS-Seal Gauge
Pressure Range (see selection table)
3.6
4.0
Code
C
VCode
40K
100K
160K
400K
600K
1M
1.6M
2.5M
4M
7M
XXX
Code
G
A
S
Code
X
Dimensions(mm)