item 02 -11795840 or bs internet 02-2009

Comparator Balances

Vacuum technology

Robot solutions

Automated & manual operation

Solutions up to 5400 kg

Innovative Solutions For Lifetime Accuracy

Com

para

tor B

alan

ces

2

In the metrol o gy or qual ity assur-ance lab, you con stant ly have to make quick and accu rate deci-sions. Reliable results as well as a competent, reliable partner that offers you more support than just high-precision weighing instru-ments, are of utmost importance.

Pro fes sion al solu tions for every weight class. You can eas i ly deter mine even the small est dif fer enc es in mass with MET TLER TOLE DO Com par a tor Balanc es.They provide highest resolution and excellent repeatability, the critical factors for your weighing performance. We offer several models with readabilities as fine as 0.1 μg and capacities up to 5400 kilograms. Com plete con sul ta tion from plan ning on up to instal la tion Wheth er you need a few use ful tips or a turn-key solu tion, call on MET TLER TOLE DO to help find the right solu tion for your appli ca tion. We would like noth ing bet ter than to see you prof it from our com par-a tive weigh ing knowl edge.

Quality – controlled and assured All METTLER TOLEDO products have been developed, manufac-tured and tested under the most stringent international standards. Our top-of-the-line comparator balance models meet the most demanding standards and tests.

Our production facilities in Greifen see (Switzerland) and Albstadt (Germany) fulfill the ISO 9001 and ISO 14001, proof that their Quality Assurance System meets the highest standards.

Service and support worldwide We are available with advice and help almost anywhere in the world. You may count on us for regular maintenance and checks and, of course, whenever you need a quick service response.

Vacuum Comparator 4Robotic Comparator 6Automated Comparator 10Manual Comparator 12Volume Comparator / Software / Susceptometer 18Weights 20Selecting the right Comparator for weight calibration 22

Com

para

tor B

alan

ces Forerunner with Innovation

and Global Competence

3

In the metrol o gy or qual ity assur-ance lab, you con stant ly have to make quick and accu rate deci-sions. Reliable results as well as a competent, reliable partner that offers you more support than just high-precision weighing instru-ments, are of utmost importance.

Pro fes sion al solu tions for every weight class. You can eas i ly deter mine even the small est dif fer enc es in mass with MET TLER TOLE DO Com par a tor Balanc es.They provide highest resolution and excellent repeatability, the critical factors for your weighing performance. We offer several models with readabilities as fine as 0.1 μg and capacities up to 5400 kilograms. Com plete con sul ta tion from plan ning on up to instal la tion Wheth er you need a few use ful tips or a turn-key solu tion, call on MET TLER TOLE DO to help find the right solu tion for your appli ca tion. We would like noth ing bet ter than to see you prof it from our com par-a tive weigh ing knowl edge.

Quality – controlled and assured All METTLER TOLEDO products have been developed, manufac-tured and tested under the most stringent international standards. Our top-of-the-line comparator balance models meet the most demanding standards and tests.

Our production facilities in Greifen see (Switzerland) and Albstadt (Germany) fulfill the ISO 9001 and ISO 14001, proof that their Quality Assurance System meets the highest standards.

Service and support worldwide We are available with advice and help almost anywhere in the world. You may count on us for regular maintenance and checks and, of course, whenever you need a quick service response.

Vacuum Comparator 4Robotic Comparator 6Automated Comparator 10Manual Comparator 12Volume Comparator / Software / Susceptometer 18Weights 20Selecting the right Comparator for weight calibration 22

Com

para

tor B

alan

ces Forerunner with Innovation

and Global Competence

4

The system: world-uniqueA high-resolution comparator balance, precise weight handler, vacuum chamber: together they form the M_one, the most used weighing system in the world for fully automatic mass determination up to 1 kg under constant pressure or vacuum.

Pressure-controlled atmosphereThe cleverly constructed vacuum chamber allows measurements at extremely constant ambient condi-tions ranging from normal atmos-pheric pressure to an underpres-sure of 10–6 mbar. This ensures a constant air density for less uncertainty influence of air buoy-ancy correction. The maximum measurement evaluation of 10 ng (0.00000001 g) and an accuracy of 100 ng (0.1 μg) is attained for smallest measurement uncer-tainties.

Weighing range up to 10 kgBeside the M_one, the M_10 gives you utmost precision for standard 1:1 comparison up to 10 kg weighings as well as various patterns of downward calibration. Yet placing the compensation weights is easy and fast.

Programmed automation and flexibility. You can configure the entire measuring process according to your requirements. The Windows® based software performs the measurement completely automatic with just one keystroke.

Comparison in every form.The weight handler with its STAR-shaped weighing pan and four or six platforms takes standard cylindrical or spherical weights in any combination. Under vacuum, practically error-free comparisons between weights of different volume become possible.

Vacu

um C

ompa

rato

r The Reference In Vacuum Weighing Technology

Best performance and highest readability in vacuum and constant pressure Highest flexibility and comfort with STAR-shaped weighing pan Unique vacuum loading system with round vacuum chamber

Vacuum transportation.Optionally available are a vacuum load lock and a vacuum transportation container. They make the M_one a unique vacuum measuring system – an ideal configuration for research and development in gravimetric metrology.

Model E1 E2 F1 Max. load Readability Repeatability

M_one Comparator 1001.5 g 0.1 μg 0.5 μg

M_10 Comparator 10011 g 1 μg 8 μg

The M_10.For measurements up to 10 kg with 1μg readability.

5

The system: world-uniqueA high-resolution comparator balance, precise weight handler, vacuum chamber: together they form the M_one, the most used weighing system in the world for fully automatic mass determination up to 1 kg under constant pressure or vacuum.

Pressure-controlled atmosphereThe cleverly constructed vacuum chamber allows measurements at extremely constant ambient condi-tions ranging from normal atmos-pheric pressure to an underpres-sure of 10–6 mbar. This ensures a constant air density for less uncertainty influence of air buoy-ancy correction. The maximum measurement evaluation of 10 ng (0.00000001 g) and an accuracy of 100 ng (0.1 μg) is attained for smallest measurement uncer-tainties.

Weighing range up to 10 kgBeside the M_one, the M_10 gives you utmost precision for standard 1:1 comparison up to 10 kg weighings as well as various patterns of downward calibration. Yet placing the compensation weights is easy and fast.

Programmed automation and flexibility. You can configure the entire measuring process according to your requirements. The Windows® based software performs the measurement completely automatic with just one keystroke.

Comparison in every form.The weight handler with its STAR-shaped weighing pan and four or six platforms takes standard cylindrical or spherical weights in any combination. Under vacuum, practically error-free comparisons between weights of different volume become possible.

Vacu

um C

ompa

rato

r The Reference In Vacuum Weighing Technology

Best performance and highest readability in vacuum and constant pressure Highest flexibility and comfort with STAR-shaped weighing pan Unique vacuum loading system with round vacuum chamber

Vacuum transportation.Optionally available are a vacuum load lock and a vacuum transportation container. They make the M_one a unique vacuum measuring system – an ideal configuration for research and development in gravimetric metrology.


M_one Comparator 1001.5 g 0.1 μg 0.5 μg

M_10 Comparator 10011 g 1 μg 8 μg

The M_10.For measurements up to 10 kg with 1μg readability.

6

Robotic systemSystems like the a_Comparator Line are completely automated turn-key solutions. The a107 and a5 have an unsurpassed resolution toward nanogram accuracy up to 100 g with 0.1 μg (100 ng) read-ability. Each have a large weight magazine for high productivity, a 3-axis robot and Windows® based controller.

Increased productivity At the start of the calibration proce-dure you insert the mass-standard weights and the weights for testing into the holders of the magazine. The robot then takes the individual weights, transfers them to the weighing pan, and returns them after weighing. You can program the sequence and weighing pattern according to your needs.

Easy data managementNeedless to say, all weighing operations, references, alloca-tions, and results are automatically comprehensively documented in a Windows® based software.

Easy operationThe a_control software is Windows® based soft-ware. You can program your procedures practi-cally any way you like. Or use the familiar stand-ard programs.

Productivity included18 weights fit into the magazine of the a1000 Comparator.

High performance as standardThe magazine of the a107 Com-parator measures 30 weights with 0.1μg (100ng) accuracy up to 100g.

Large magazine, efficient weighing pan The magazine of the a5 Comparator has three rows each with twelve weight carriers. You can therefore load 36 weights and automatically perform corre-spondingly numerous downward weight calibrations. Thanks to the special weighing pan, the robot can place up to three weights on it simultaneously.

Robo

tic C

ompa

rato

r The Fully Automatic SolutionAccurate and Productive Robots

Peak performance toward nanogram accuracy High productivity with large weight magazines Time saving with fast 3-axis robot


a5 Comparator 6.1 g 0.1 μg 0 – 1 g 0.15 μg 1 – 2 g 0.25 μg 2 – 5 g 0.4 μg

a107 Comparator 111 g 0.1 μg 1 μg

a100 Comparator 111 g 1 µg 1.6 µg

a1000 Comparator 1109 g 10 µg 10 µg

7

Robotic systemSystems like the a_Comparator Line are completely automated turn-key solutions. The a107 and a5 have an unsurpassed resolution toward nanogram accuracy up to 100 g with 0.1 μg (100 ng) read-ability. Each have a large weight magazine for high productivity, a 3-axis robot and Windows® based controller.

Increased productivity At the start of the calibration proce-dure you insert the mass-standard weights and the weights for testing into the holders of the magazine. The robot then takes the individual weights, transfers them to the weighing pan, and returns them after weighing. You can program the sequence and weighing pattern according to your needs.

Easy data managementNeedless to say, all weighing operations, references, alloca-tions, and results are automatically comprehensively documented in a Windows® based software.

Easy operationThe a_control software is Windows® based soft-ware. You can program your procedures practi-cally any way you like. Or use the familiar stand-ard programs.

Productivity included18 weights fit into the magazine of the a1000 Comparator.

High performance as standardThe magazine of the a107 Com-parator measures 30 weights with 0.1μg (100ng) accuracy up to 100g.

Large magazine, efficient weighing pan The magazine of the a5 Comparator has three rows each with twelve weight carriers. You can therefore load 36 weights and automatically perform corre-spondingly numerous downward weight calibrations. Thanks to the special weighing pan, the robot can place up to three weights on it simultaneously.

Robo

tic C

ompa

rato

r The Fully Automatic SolutionAccurate and Productive Robots

Peak performance toward nanogram accuracy High productivity with large weight magazines Time saving with fast 3-axis robot


a5 Comparator 6.1 g 0.1 μg 0 – 1 g 0.15 μg 1 – 2 g 0.25 μg 2 – 5 g 0.4 μg

a107 Comparator 111 g 0.1 μg 1 μg

a100 Comparator 111 g 1 µg 1.6 µg

a1000 Comparator 1109 g 10 µg 10 µg

8

Highest accuracyAt METTLER TOLEDO, innova-tive solutions are our speciality. Here‘s another one. The AX64004 comparator performs comparison weighings up to 64 kg, with sen-sational 0.1 mg resolution.

Reliable and highly reproducibleSelf-centering of the weighing platform and high-performance weighing cell automatically gives highly reliable measurements which are always reproducible.

Seamless from 1 kg to 64 kgBy automatically switching sub-stitution weights, the patented METTLER TOLEDO substitution weight mechanism enables mass determination of any weight between 1 kg and 64 kg.

Menu-driven, Windows® basedStructured menus and comprehen-sive dialogs with Windows® based software guide the user through the settings. The mass determination results are generated at one key-stroke automatically.

Productivity factorThe automatic four-platform weight handler simplifies working procedures and increases efficiency.

Easy operationUser-friendly, menu- driven Windows® based software make operating the system and recording data easy and secure.

Performance factorIndividual draft shields

guarantee high-accuracy measurements and a stable

measuring environment.

Auto

mat

ed C

ompa

rato

r Unrivaled Mass ComparisonUp to 64 kg with 0.1mg Resolution

Highest accuracy up to 64 kg Full automation with 4-position weight handler Flexibility with large 360 mm weighing pan

Model E1 E2 F1 F2 Max. load Readability Repeatability

AX64004 Comparator 64 kg 0.1 mg 0.4 mg



Capacity factorThe large weighing pan allows several weights to be placed in combination for mass determination. The weights can have different shapes: cylindrical, disk, rectan-gular.

9

Highest accuracyAt METTLER TOLEDO, innova-tive solutions are our speciality. Here‘s another one. The AX64004 comparator performs comparison weighings up to 64 kg, with sen-sational 0.1 mg resolution.

Reliable and highly reproducibleSelf-centering of the weighing platform and high-performance weighing cell automatically gives highly reliable measurements which are always reproducible.

Seamless from 1 kg to 64 kgBy automatically switching sub-stitution weights, the patented METTLER TOLEDO substitution weight mechanism enables mass determination of any weight between 1 kg and 64 kg.

Menu-driven, Windows® basedStructured menus and comprehen-sive dialogs with Windows® based software guide the user through the settings. The mass determination results are generated at one key-stroke automatically.

Productivity factorThe automatic four-platform weight handler simplifies working procedures and increases efficiency.

Easy operationUser-friendly, menu- driven Windows® based software make operating the system and recording data easy and secure.

Performance factorIndividual draft shields

guarantee high-accuracy measurements and a stable

measuring environment.

Auto

mat

ed C

ompa

rato

r Unrivaled Mass ComparisonUp to 64 kg with 0.1mg Resolution

Highest accuracy up to 64 kg Full automation with 4-position weight handler Flexibility with large 360 mm weighing pan

Model E1 E2 F1 F2 Max. load Readability Repeatability




Capacity factorThe large weighing pan allows several weights to be placed in combination for mass determination. The weights can have different shapes: cylindrical, disk, rectan-gular.

10

Cutting-edge technologyWith their extraor di nary res o lu tion and incom par able repeat abil ity, the AX107H, AX106H, AX1006 and AX10005 Com par a tor Bal anc es com prise a class of their own. They meet the high est re quire ments for accuracy up to 0.1 μg (100 na-nograms) and the determination of weight pieces of up to 10 kg. Human error is eliminated due to fully automatic operation.

Cleverly designed turntableWith the AX107H and AX106H the efficiency is increased by placing several weights on the turntable for each weighing position. This enables you to calibrate the weight decade 10 - 100 g by dissemina-tion without the aid of disc weights.

Saves results automaticallyComparison weighings are carried out completely automatically. The measurement data are captured, evaluated, and recorded automatic-ally in a Windows® based software. The standardized system structure and controls make operation easy. All measurement results are com-pletely traceable at any time and stored in a comprehensive report.

Automatic climate evaluationClimatic data can be read directly into the controller using our op-tional highly accurate measuring station Klimet A30.

Wide weighing rangeThe entire weighing range of the AX1006 is available to you – from 0 to 1011g. This makes it pos sible to use the Comparator Balance with out any restrictions, even for testing non-metric weights.

Saves timeBy simply switching in tare weights, the AX10005 can be quickly and easily set to the desired weighing range such as 1, 2, 5 or 10 kg.

AX107HThe automated “nano” comparator up to 100 g.

Auto

mat

ed C

ompa

rato

r Superior PerformanceMeets Automatic Operation


AX107H Comparator 111 g 0.1 µg 0.8 µg

AX106H Comparator 111 g 1 µg 1,5 µg

AX1006 Comparator 1 011 g 1 µg 2 µg


Ultimate accuracy toward nanogram accuracy Highest repeatability with hanging pan Full automation with 4-position weight handler

AX107H Downward calibration of a weight set.

11

Cutting-edge technologyWith their extraor di nary res o lu tion and incom par able repeat abil ity, the AX107H, AX106H, AX1006 and AX10005 Com par a tor Bal anc es com prise a class of their own. They meet the high est re quire ments for accuracy up to 0.1 μg (100 na-nograms) and the determination of weight pieces of up to 10 kg. Human error is eliminated due to fully automatic operation.

Cleverly designed turntableWith the AX107H and AX106H the efficiency is increased by placing several weights on the turntable for each weighing position. This enables you to calibrate the weight decade 10 - 100 g by dissemina-tion without the aid of disc weights.

Saves results automaticallyComparison weighings are carried out completely automatically. The measurement data are captured, evaluated, and recorded automatic-ally in a Windows® based software. The standardized system structure and controls make operation easy. All measurement results are com-pletely traceable at any time and stored in a comprehensive report.

Automatic climate evaluationClimatic data can be read directly into the controller using our op-tional highly accurate measuring station Klimet A30.

Wide weighing rangeThe entire weighing range of the AX1006 is available to you – from 0 to 1011g. This makes it pos sible to use the Comparator Balance with out any restrictions, even for testing non-metric weights.

Saves timeBy simply switching in tare weights, the AX10005 can be quickly and easily set to the desired weighing range such as 1, 2, 5 or 10 kg.

AX107HThe automated “nano” comparator up to 100 g.

Auto

mat

ed C

ompa

rato

r Superior PerformanceMeets Automatic Operation


AX107H Comparator 111 g 0.1 µg 0.8 µg

AX106H Comparator 111 g 1 µg 1,5 µg



Ultimate accuracy toward nanogram accuracy Highest repeatability with hanging pan Full automation with 4-position weight handler

AX107H Downward calibration of a weight set.

12

Easy to useThanks to the full weighing range, you can use the XP6U, XP26C, XP56C and XP505 at any capacity. The weighing range is fully elec- tron ic. The doors to the weigh ing cham ber of all mod els open and close auto mat i cal ly. This leaves your hands free to work with the sam ple.

Adjust ed when ev er you want …The motor ized cal i bra tion of the XP and AX is trig gered at the touch of a but ton.

… or when ev er the bal ance needs it. The XP and AX compara-tors adjust them selves auto mat i cal - ly when chang es in envi ron men tal con ditions make this nec es sary. Because of proFACT (Fully Auto-matic Calibration Technology), you are always wor king with the high est pre ci sion.

Adapt ed to the envi ron ment Modern sig nal pro cess ing facil i tates weighing that is adapt ed to the applica tion and the loca tion. The easy config u ra tion of the vibra tion adapter and the stabil ity detec tor helps pro vide reli able results.

Stable con di tionsIn design ing the XP and AX, we sep ar at ed the elec tro nics from the actu al weigh ing cell. This effec tive-ly reduc es any ther mal influ ence on the weigh ing results. When the sam ple is accli ma tized in the weigh ing cham ber, even high er stabil ity can be achieved.

Wireless data evaluationAll mod els have stan dard built-in data interfaces. The XP models can also be equipped with an Ethernet or Bluetooth® interface. With the MCLink Software, you can collect and evaluate data, print reports or store them for inter preta tion later on.

Retrofitting the AX106If you have even greater demands on accuracy, we also offer the weight handler separately. You can use it to convert the AX106 to an AX106H and hence weigh fully automati cally.

WeighCom – easy operation, clear layout. User-guided process for mass determination.

Man

ual C

ompa

rato

r When the SmallestDifference Counts

9 models up to 2 kg maximum capacity XP6U – Peak performance up to 6 g User-guided weight determination Easy operation with touchscreen display

Model E1 E2 F1 F2 Max. load Readability Repeatability XP6U Comparator 6.1g 0.1 µg 0.2 – 0.35 µg

XP26C Comparator 22 g 1 µg 1.5 µg

XP56C Comparator 52 g 1 µg 3 µg

AX106 Comparator 111 g 1 µg 3 µg


XP505 Comparator 520 g 0.1 mg 0.035 mg

AX1005 Comparator 1109 g 0.01 mg 0.02 mg



13

Easy to useThanks to the full weighing range, you can use the XP6U, XP26C, XP56C and XP505 at any capacity. The weighing range is fully elec- tron ic. The doors to the weigh ing cham ber of all mod els open and close auto mat i cal ly. This leaves your hands free to work with the sam ple.

Adjust ed when ev er you want …The motor ized cal i bra tion of the XP and AX is trig gered at the touch of a but ton.

… or when ev er the bal ance needs it. The XP and AX compara-tors adjust them selves auto mat i cal - ly when chang es in envi ron men tal con ditions make this nec es sary. Because of proFACT (Fully Auto-matic Calibration Technology), you are always wor king with the high est pre ci sion.

Adapt ed to the envi ron ment Modern sig nal pro cess ing facil i tates weighing that is adapt ed to the applica tion and the loca tion. The easy config u ra tion of the vibra tion adapter and the stabil ity detec tor helps pro vide reli able results.

Stable con di tionsIn design ing the XP and AX, we sep ar at ed the elec tro nics from the actu al weigh ing cell. This effec tive-ly reduc es any ther mal influ ence on the weigh ing results. When the sam ple is accli ma tized in the weigh ing cham ber, even high er stabil ity can be achieved.

Wireless data evaluationAll mod els have stan dard built-in data interfaces. The XP models can also be equipped with an Ethernet or Bluetooth® interface. With the MCLink Software, you can collect and evaluate data, print reports or store them for inter preta tion later on.

Retrofitting the AX106If you have even greater demands on accuracy, we also offer the weight handler separately. You can use it to convert the AX106 to an AX106H and hence weigh fully automati cally.

WeighCom – easy operation, clear layout. User-guided process for mass determination.

Man

ual C

ompa

rato

r When the SmallestDifference Counts

9 models up to 2 kg maximum capacity XP6U – Peak performance up to 6 g User-guided weight determination Easy operation with touchscreen display

Model E1 E2 F1 F2 Max. load Readability Repeatability XP6U Comparator 6.1g 0.1 µg 0.2 – 0.35 µg

XP26C Comparator 22 g 1 µg 1.5 µg

XP56C Comparator 52 g 1 µg 3 µg



XP505 Comparator 520 g 0.1 mg 0.035 mg




14

Man

ual C

ompa

rato

r

Manual 2-position turntable guarantees high precision.

Manual dial weights increase flexibility.

Applications in industries and governmentIndustrial and governmental metrol-ogy labs both require high priority on reliability and accuracy. The compact robust XP platform and unique AX with 2 positions offer the best solution when highest accuracy is required up to 12 kg. Ideal for daily mass determination of weights, but also of other sam-ples such as small gas bottles or mechanical parts.

Efficient weighingBoth XP and AX have big access sliding doors for secure placement of samples on the pan. In addition the balance have big square or round weighing pans up to 220 mm diameter with LevelMatic (optional for XP2003) that ensures secure results. Herewith offering efficient and accurate weighing.

Ethernet and wireless data security Besides a standard RS232 on the AX, the XP models can have up to 6 different interfaces to integrate in any network. The optional Bluetooth interface enables wireless data transfer to your computer. If con-nected to a network the XP Compa-rators can also be equipped with an optional Ethernet interface for direct data transfer to a server.

Solutions for Versatile Mass ApplicationsWith Comparators up to 12 kg

Robust solutions with built-in over-load protection (XP) Practical platforms with up to 220 mm diameter size Easy operation with touch screen display Data security with Ethernet or Wireless interfaces

Model E1 E2 F1 F2 M1 Max. load Readability Repeatability

XP2004S Comparator 2300 g 0.1 mg 0.1 mg

XP2003S Comparator 2300 g 1 mg 1 mg

XP5003S Comparator 5100 g 1 mg 0.8 mg



LevelMatic® Centering device to eliminate

corner load error.

Straight forward resultsThe easy to use touch screen operation guides you through the mass determination. A selection of processes and references enable full flexibility. In addition the XP offers air buoyancy correction.

Up to 6 different interfaces for integration into any network.

15

Man

ual C

ompa

rato

r

Manual 2-position turntable guarantees high precision.

Manual dial weights increase flexibility.

Applications in industries and governmentIndustrial and governmental metrol-ogy labs both require high priority on reliability and accuracy. The compact robust XP platform and unique AX with 2 positions offer the best solution when highest accuracy is required up to 12 kg. Ideal for daily mass determination of weights, but also of other sam-ples such as small gas bottles or mechanical parts.

Efficient weighingBoth XP and AX have big access sliding doors for secure placement of samples on the pan. In addition the balance have big square or round weighing pans up to 220 mm diameter with LevelMatic (optional for XP2003) that ensures secure results. Herewith offering efficient and accurate weighing.

Ethernet and wireless data security Besides a standard RS232 on the AX, the XP models can have up to 6 different interfaces to integrate in any network. The optional Bluetooth interface enables wireless data transfer to your computer. If con-nected to a network the XP Compa-rators can also be equipped with an optional Ethernet interface for direct data transfer to a server.

Solutions for Versatile Mass ApplicationsWith Comparators up to 12 kg

Robust solutions with built-in over-load protection (XP) Practical platforms with up to 220 mm diameter size Easy operation with touch screen display Data security with Ethernet or Wireless interfaces

Model E1 E2 F1 F2 M1 Max. load Readability Repeatability

XP2004S Comparator 2300 g 0.1 mg 0.1 mg


XP5003S Comparator 5100 g 1 mg 0.8 mg



LevelMatic® Centering device to eliminate

corner load error.

Straight forward resultsThe easy to use touch screen operation guides you through the mass determination. A selection of processes and references enable full flexibility. In addition the XP offers air buoyancy correction.

Up to 6 different interfaces for integration into any network.

16

High Load Line up to 64 kg The XP-L High Load Line is a com-plete product range up to 64 kg with a unique resolution up to 26 million points in kilogram range. The high resolution combined with the innovative integrated Level Matic

weighing pan delivers peak performance to determine smallest differences at an accuracy second to none.

Peak performance up to 5400 kg Accomplish demanding calibrations or weight determination at peak ac-curacy. The XP-K Comparators offer top resolution and excellent repeat-ability up to 5400 kg.

Straight forward resultsAt a push of a button on the touch-screen, secure results are obtained. Selection of processes, references and air buoyancy correction enable full flexibility.

Utmost reliabilityThe LevelMatic weighing pan elimi-nates corner load effects. The large draft shield prevents air turbulences. The combination of both guarantees utmost reliability and accuracy of measurements.

Man

ual C

ompa

rato

r Unsurpassed and UniquePeak Performance up to 5400 kg

XP604KM – Calibration up to 500 kg E2 LevelMatic® to increase accuracy up to 5000 kg Optimal ergonomics with SmartScreen color display

Model E1 E2 F1 F2 M1 M2 Max. load Readability Repeatability

XP26003L Comparator 26 kg 1 mg 3 mg




XP64002L-T Comparator 64 kg 5 mg 30 mg

XP155KS Comparator 150 kg 0.05 g 0.12 g

XP604KM Comparator 600 kg 0.1 g 0.23 g


XP2003KL Comparator 2500 kg 1 g 7 g


LevelMatic®

The innovative self-centering device LevelMatic reduces the corner load influence drastically for loads up to 5000 kg. The combination with the draft ring XP-WK leads to highly improved accuracy.

XP-LTThe unique transportable comparator for F1-OIML weights up to 50 kg.

High accuracy for industry and mass labsThe combination of a stainless platform and centering aid reduces influence of displacement and magnetic weights to achieve highest accuracy on ultra loads.

17

High Load Line up to 64 kg The XP-L High Load Line is a com-plete product range up to 64 kg with a unique resolution up to 26 million points in kilogram range. The high resolution combined with the innovative integrated Level Matic

weighing pan delivers peak performance to determine smallest differences at an accuracy second to none.

Peak performance up to 5400 kg Accomplish demanding calibrations or weight determination at peak ac-curacy. The XP-K Comparators offer top resolution and excellent repeat-ability up to 5400 kg.

Straight forward resultsAt a push of a button on the touch-screen, secure results are obtained. Selection of processes, references and air buoyancy correction enable full flexibility.

Utmost reliabilityThe LevelMatic weighing pan elimi-nates corner load effects. The large draft shield prevents air turbulences. The combination of both guarantees utmost reliability and accuracy of measurements.

Man

ual C

ompa

rato

r Unsurpassed and UniquePeak Performance up to 5400 kg

XP604KM – Calibration up to 500 kg E2 LevelMatic® to increase accuracy up to 5000 kg Optimal ergonomics with SmartScreen color display

Model E1 E2 F1 F2 M1 M2 Max. load Readability Repeatability





XP64002L-T Comparator 64 kg 5 mg 30 mg

XP155KS Comparator 150 kg 0.05 g 0.12 g





LevelMatic®

The innovative self-centering device LevelMatic reduces the corner load influence drastically for loads up to 5000 kg. The combination with the draft ring XP-WK leads to highly improved accuracy.

XP-LTThe unique transportable comparator for F1-OIML weights up to 50 kg.

High accuracy for industry and mass labsThe combination of a stainless platform and centering aid reduces influence of displacement and magnetic weights to achieve highest accuracy on ultra loads.

18

Determining the density and volume of solid bodies is very important both in industrial (e.g. materials manufacturing) and in metrological applications. In metrology it is recommended to specify the volume and density on calibration certificates for weight pieces in the OIML accuracy class E1 or lower, when used above cer-tain sea levels.

Especially versatile: VC1005XThe VC1005X is used to determine the density and volume of OIML weights and spheres. The VC1005X covers the range up to 1 kg.

Especially reliable: P20 DensityTo be used in combination with XP-L Comparator Balance. With the Windows® based software, density determination is performed accurately and easily from 2 kg up to 20 kg.

Volu

me

Com

para

tor /

Sof

twar

e Volume and Density DeterminationFrom 1g up to 20 kg

VC1005X for automated density and volume determination up to 1kg P20 Density for volume and density determination from 2 to 20 kg Time-saving, reliable and convenient system solutions

Dedicated SolutionsExpand, Analyze and Specialize

MCLink

MCLink software

• User guided through freely designable processes • Simultaneous control of up to 4 Comparator Balances• For METTLER TOLEDO XP Comparator Balances

Professional weight calibration solutionDefine processes to your need, combine it with Klimet A30 with tempera-ture, air pressure and relative humidity sensors and generate professional reports including uncertainties and air buoyancy correction. Or export and store all data for full traceability. The user friendly software contains ad-ministrator rights and can be used in 5 languages (En, De, Es, Fr, It).

Susceptometer

Determination of magnetic characteristics is an important precondition to ensure quality of high end materials. The S50-K Susceptometer measures susceptibility and permanent magnetization of materials up to 50 kg with highest accuracy. It consist of 4 components:•SusceptometerHardware Easy positioning with centering aid and level indicator and strong

NdFeB magnets for high magnetic fields•SusceptometerSoftware User friendly straightforward workflow with SmartGeo for easy

correction of any shape•Susceptibilityreference Calibrated iron acrylic low permeability reference •MicroComparator Select out of three models according specific requirements

Klimet A30

• Climate measurement station of highest accuracy and reliability• Stand-alone or integrateable to all comparators software for direct data process-

ing

High accuracy air buoyancy correctionThe Klimet A30 collects air temperature, humidity and pressure for the calculation of the air density and buoyancy correction. Up to four comparators can be connected for most accurate local air density determination.

19

Determining the density and volume of solid bodies is very important both in industrial (e.g. materials manufacturing) and in metrological applications. In metrology it is recommended to specify the volume and density on calibration certificates for weight pieces in the OIML accuracy class E1 or lower, when used above cer-tain sea levels.

Especially versatile: VC1005XThe VC1005X is used to determine the density and volume of OIML weights and spheres. The VC1005X covers the range up to 1 kg.

Especially reliable: P20 DensityTo be used in combination with XP-L Comparator Balance. With the Windows® based software, density determination is performed accurately and easily from 2 kg up to 20 kg.

Volu

me

Com

para

tor /

Sof

twar

e Volume and Density DeterminationFrom 1g up to 20 kg

VC1005X for automated density and volume determination up to 1kg P20 Density for volume and density determination from 2 to 20 kg Time-saving, reliable and convenient system solutions

Dedicated SolutionsExpand, Analyze and Specialize

MCLink

MCLink software

• User guided through freely designable processes • Simultaneous control of up to 4 Comparator Balances• For METTLER TOLEDO XP Comparator Balances

Professional weight calibration solutionDefine processes to your need, combine it with Klimet A30 with tempera-ture, air pressure and relative humidity sensors and generate professional reports including uncertainties and air buoyancy correction. Or export and store all data for full traceability. The user friendly software contains ad-ministrator rights and can be used in 5 languages (En, De, Es, Fr, It).

Susceptometer

Determination of magnetic characteristics is an important precondition to ensure quality of high end materials. The S50-K Susceptometer measures susceptibility and permanent magnetization of materials up to 50 kg with highest accuracy. It consist of 4 components:•SusceptometerHardware Easy positioning with centering aid and level indicator and strong

NdFeB magnets for high magnetic fields•SusceptometerSoftware User friendly straightforward workflow with SmartGeo for easy

correction of any shape•Susceptibilityreference Calibrated iron acrylic low permeability reference •MicroComparator Select out of three models according specific requirements

Klimet A30

• Climate measurement station of highest accuracy and reliability• Stand-alone or integrateable to all comparators software for direct data process-

ing

High accuracy air buoyancy correctionThe Klimet A30 collects air temperature, humidity and pressure for the calculation of the air density and buoyancy correction. Up to four comparators can be connected for most accurate local air density determination.

20

Premium WeightsOIML E1, E2 and F1

Specifications E1, E2, F1Wire WeightHigh-grade steelDensity: 8.0 kg/dm3

Magnetic susceptibility < 0.01

Knob WeightHigh-grade steelDensity: 8.0 kg/dm3


IndividualWeights

E1 E2

Nominal Order number Order number Order number value Shape Wooden box Wooden box Plastic box

1 mg 159000 159001 158300 158301 158306 158307

2 mg 159010 159011 158310 158311 158316 158317

5 mg 159020 159021 158320 158321 158326 158327

10 mg 159030 159031 158330 158331 158336 158337

20 mg 159040 159041 158340 158341 158346 158347

50 mg 159050 159051 158350 158351 158356 158357

100 mg 159060 159061 158360 158361 158366 158367

200 mg 159070 159071 158370 158371 158376 158377

500 mg 159080 159081 158380 158381 158386 158387

1 g 159090 159091 158390 158391 158396 158397

2 g 159100 159101 158400 158401 158406 158407

5 g 159110 159111 158410 158411 158416 158417

10 g 159120 159121 158420 158421 158426 158427

20 g 159130 159131 158430 158431 158436 158437

50 g 159140 159141 158440 158441 158446 158447

100 g 159150 159151 158450 158451 158456 158457

200 g 159160 159161 158460 158461 158466 158467

500 g 159170 159171 158470 158471 158476 158477

1 kg 159180 159181 158480 158481 158486 158487

2 kg 159190 159191 158490 158491 158496 158497

5 kg 159200 159201 158500 158501 158506 158507

10 kg 159210 159211 158510 158511 158516 158517

20 kg 159220 159221 158520 158521 158526 158527

50 kg 159230 159231 158530 158531

Nominal Order number Order number value Shape Wooden box Plastic box

1 mg 159410 159411 159416 159417

2 mg 159420 159421 159426 159427

5 mg 159430 159431 159436 159437

10 mg 159440 159441 159446 159447

20 mg 159450 159451 159456 159457

50 mg 159460 159461 159466 159467

100 mg 159470 159471 159476 159477

200 mg 159480 159481 159486 159487

500 mg 159490 159491 159496 159497

1 g 158600 158601 158606 158607

2 g 158610 158611 158616 158617

5 g 158620 158621 158626 158627

10 g 158630 158631 158636 158637

20 g 158640 158641 158646 158647

50 g 158650 158651 158656 158657

100 g 158660 158661 158666 158667

200 g 158670 158671 158676 158677

500 g 158680 158681 158686 158687

1 kg 158690 158691 158696 158697

2 kg 158700 158701 158706 158707

5 kg 158710 158711 158716 158717

10 kg 158720 158721 158726 158727

20 kg 158730 158731 158736 158737

50 kg 158740 158741

F1

Plastic Box

E1 E2Weight Sets

Wooden Box

1 mg 1 mg 1 mg 1 mg 1 mg 1 g 1 g 1 mg 1 kg 1 mg 1 mg 1 mg 1 mg 1 mg 1 g 1 g 1 mg 1 kg 500 mg 200 g 1 kg 2 kg 5 kg 50 g 500 g 1 kg 5 kg 500 mg 200 g 1 kg 2 kg 5 kg 50 g 500 g 1 kg 5 kg

1 mg

2 mg

5 mg

10 mg

20 mg

50 mg

100 mg

200 mg

500 mg

1 g

2 g

5 g

10 g

20 g

50 g

100 g

200 g

500 g

1 kg

2 kg

5 kg

Number of 12 23 25 27 28 8 12 38 4 12 23 25 27 28 8 12 38 Weights 159300 159340 159350 11117614 11117616 159310 159320 159360 159330 158800 158840 158850 11117624 11117626 158810 158820 158860 158830

159301 159341 159351 11117615 11117617 159311 159321 159361 159331 158801 158841 158851 11117625 11117627 158811 158821 158861 158831

158806 158846 158856 11117321 11117323 158816 158826 11125900

158807 158847 158857 11117322 11117324 158817 158827 11125901

Weight and Box

Weight and Box, including Certificate

Wire weight

Marked wire weight

Cylindrical weight with knob

Marked cylindrical weight with knob

Marked single weights are available on request

F1Weight Sets

1 mg 1 mg 1mg 1 mg 1 mg 1 g 1 g 1 kg 500 mg 200 g 1 kg 2 kg 5 kg 50 g 500 g 5 kg

1 mg

2 mg

5 mg

10 mg

20 mg

50 mg

100 mg

200 mg

500 mg

1 g

2 g

5 g

10 g

20 g

50 g

100 g

200 g

500 g

1 kg

2 kg

5 kg

Number of 12 23 25 27 28 8 12 4 weights Wooden Box 161700 158900 158910 11117802 11117804 158870 158880 158890

161701 158901 158911 11117803 11117805 158871 158881 158891

Plastic Box 161706 158906 158916 11119979 11119981 158876 158886 11125907

161707 158907 158917 11119980 11119982 158877 158887 11125908

Wei

ghts

Swiss Made Monobloc Weights High Quality for long time stability Reference Weights (EO) and other artefacts available on request

More info www.mt.com/weights

2121

Premium WeightsOIML E1, E2 and F1

Specifications E1, E2, F1Wire WeightHigh-grade steelDensity: 8.0 kg/dm3


Knob WeightHigh-grade steelDensity: 8.0 kg/dm3


IndividualWeights

E1 E2

Nominal Order number Order number Order number value Shape Wooden box Wooden box Plastic box

1 mg 159000 159001 158300 158301 158306 158307

2 mg 159010 159011 158310 158311 158316 158317

5 mg 159020 159021 158320 158321 158326 158327

10 mg 159030 159031 158330 158331 158336 158337

20 mg 159040 159041 158340 158341 158346 158347

50 mg 159050 159051 158350 158351 158356 158357

100 mg 159060 159061 158360 158361 158366 158367

200 mg 159070 159071 158370 158371 158376 158377

500 mg 159080 159081 158380 158381 158386 158387

1 g 159090 159091 158390 158391 158396 158397

2 g 159100 159101 158400 158401 158406 158407

5 g 159110 159111 158410 158411 158416 158417

10 g 159120 159121 158420 158421 158426 158427

20 g 159130 159131 158430 158431 158436 158437

50 g 159140 159141 158440 158441 158446 158447

100 g 159150 159151 158450 158451 158456 158457

200 g 159160 159161 158460 158461 158466 158467

500 g 159170 159171 158470 158471 158476 158477

1 kg 159180 159181 158480 158481 158486 158487

2 kg 159190 159191 158490 158491 158496 158497

5 kg 159200 159201 158500 158501 158506 158507

10 kg 159210 159211 158510 158511 158516 158517

20 kg 159220 159221 158520 158521 158526 158527

50 kg 159230 159231 158530 158531

Nominal Order number Order number value Shape Wooden box Plastic box

1 mg 159410 159411 159416 159417

2 mg 159420 159421 159426 159427

5 mg 159430 159431 159436 159437

10 mg 159440 159441 159446 159447

20 mg 159450 159451 159456 159457

50 mg 159460 159461 159466 159467

100 mg 159470 159471 159476 159477

200 mg 159480 159481 159486 159487

500 mg 159490 159491 159496 159497

1 g 158600 158601 158606 158607

2 g 158610 158611 158616 158617

5 g 158620 158621 158626 158627

10 g 158630 158631 158636 158637

20 g 158640 158641 158646 158647

50 g 158650 158651 158656 158657

100 g 158660 158661 158666 158667

200 g 158670 158671 158676 158677

500 g 158680 158681 158686 158687

1 kg 158690 158691 158696 158697

2 kg 158700 158701 158706 158707

5 kg 158710 158711 158716 158717

10 kg 158720 158721 158726 158727

20 kg 158730 158731 158736 158737

50 kg 158740 158741

F1

Plastic Box

E1 E2Weight Sets

Wooden Box

1 mg 1 mg 1 mg 1 mg 1 mg 1 g 1 g 1 mg 1 kg 1 mg 1 mg 1 mg 1 mg 1 mg 1 g 1 g 1 mg 1 kg 500 mg 200 g 1 kg 2 kg 5 kg 50 g 500 g 1 kg 5 kg 500 mg 200 g 1 kg 2 kg 5 kg 50 g 500 g 1 kg 5 kg

1 mg

2 mg

5 mg

10 mg

20 mg

50 mg

100 mg

200 mg

500 mg

1 g

2 g

5 g

10 g

20 g

50 g

100 g

200 g

500 g

1 kg

2 kg

5 kg

Number of 12 23 25 27 28 8 12 38 4 12 23 25 27 28 8 12 38 Weights 159300 159340 159350 11117614 11117616 159310 159320 159360 159330 158800 158840 158850 11117624 11117626 158810 158820 158860 158830

159301 159341 159351 11117615 11117617 159311 159321 159361 159331 158801 158841 158851 11117625 11117627 158811 158821 158861 158831

158806 158846 158856 11117321 11117323 158816 158826 11125900

158807 158847 158857 11117322 11117324 158817 158827 11125901

Weight and Box

Weight and Box, including Certificate

Wire weight

Marked wire weight

Cylindrical weight with knob

Marked cylindrical weight with knob

Marked single weights are available on request

F1Weight Sets

1 mg 1 mg 1mg 1 mg 1 mg 1 g 1 g 1 kg 500 mg 200 g 1 kg 2 kg 5 kg 50 g 500 g 5 kg

1 mg

2 mg

5 mg

10 mg

20 mg

50 mg

100 mg

200 mg

500 mg

1 g

2 g

5 g

10 g

20 g

50 g

100 g

200 g

500 g

1 kg

2 kg

5 kg

Number of 12 23 25 27 28 8 12 4 weights Wooden Box 161700 158900 158910 11117802 11117804 158870 158880 158890

161701 158901 158911 11117803 11117805 158871 158881 158891

Plastic Box 161706 158906 158916 11119979 11119981 158876 158886 11125907

161707 158907 158917 11119980 11119982 158877 158887 11125908

Wei

ghts

Swiss Made Monobloc Weights High Quality for long time stability Reference Weights (EO) and other artefacts available on request

More info www.mt.com/weights

22

XP6U

Com

para

tor

XP26

C Co

mpa

rato

r

XP20

04S

Com

para

tor

AX20

05 Co

mpa

rato

r

AX10

6 Co

mpa

rato

r AX

206

Com

para

tor

AX10

05 Co

mpa

rato

r

AX10

04 Co

mpa

rato

r

XP20

03S

Com

para

tor

XP50

03S

Com

para

tor

XP10

003S

Com

para

tor

XP32

003L

Com

para

tor

XP26

003L

Com

para

tor

AX12

004

Com

para

tor

XP64

003L

Com

para

tor

XP64

002L

Com

para

tor

XP64

002L

-T Co

mpa

rato

r

XP15

5KS

Com

para

tor

XP60

4KM

Com

para

tor

XP10

03KM

Com

para

tor

XP20

03KL

Com

para

tor

XP60

02KL

Com

para

tor

XP56

C Co

mpa

rato

r

XP50

5 Co

mpa

rato

r

In Mass Metrology, weights are used according guideline of OIML or ASTM that are categorized into accuracy classes E1, E2, F1, F2, M1, M2 and M3 or class 1 to 7 respectively. When determining the weight, the maximum allowed measurement uncertainty of the whole process must be equal or less than 1/3 of the maximum tolerance (mpe) of the weight under test with level of confidence k=2 or 95%. The main contribution factors of the combined measurement uncertainty are following:

Uncertainty of the weighingis the repeatability of the compara-tor with a defined number of weight comparisons per process. The more repetitions of ABA / ABBA are performed, the lower repeatability influence to the weighing uncertainty. METTLER TOLEDO is performing the calculations of the weighing ranges uppon the guaranteed load depend-ent repeatabilities in ABA weighing mode.

Uncertainty of the reference weight The reference weight being used should be at least one class higher than the test object, e.g. E2 standard weights should be used to calibrate weight pieces in class F1. The uncer-tainty contribution of the mass stand-ard is herewith only 1/9 of the MPE of the test weight.

Comparator application rangesThe illus tra tions below show the calculated weighing ranges for OIML weights according OIML R111, based on 5ABA (Class E1 at K=2), for simplified comparison of performance and weighing ranges of different models.

Vacuum, Robotic and Automated Comparators

E1 E2 F1 F2 M1 M2 M3 Weight ± mg ± mg ± mg ± mg ± mg ± mg ± mg 1 mg 0.003 0.006 0.02 0.06 0.02 2 mg 0.003 0.006 0.02 0.06 0.2 5 mg 0.003 0.006 0.02 0.06 0.2 10 mg 0.003 0.008 0.025 0.08 0.5 20 mg 0.003 0.01 0.03 0.1 0.3 50 mg 0.004 0.012 0.04 0.12 0.4 100 mg 0.005 0.016 0.05 0.16 0.5 1.6 200 mg 0.006 0.02 0.06 0.2 0.6 2 500 mg 0.008 0.025 0.08 0.25 0.8 2.5 1 g 0.01 0.03 0.1 0.3 1 3 10 2 g 0.012 0.04 0.12 0.4 1.2 4 12 5 g 0.016 0.05 0.16 0.5 1.6 5 16 10 g 0.02 0.06 0.2 0.6 2 6 20 20 g 0.025 0.08 0.25 0.8 2.5 8 25 50 g 0.03 0.10 0.3 1 3 10 30 100 g 0.05 0.16 0.5 1.6 5 16 50 200 g 0.1 0.3 1 3 10 30 100 500 g 0.25 0.8 2.5 8 25 80 250 1 kg 0.5 1.6 5 16 50 160 500 2 kg 1 3 10 30 100 300 1000 5 kg 2.5 8 25 80 250 800 2500 10 kg 5 16 50 160 500 1600 5000 20 kg 10 30 100 300 1000 3000 10000 50 kg 25 80 250 800 2500 8000 25000 100 kg 160 500 1600 5000 16000 50000 200 kg 300 1000 3000 10000 30000 100000 500 kg 800 2500 8000 25000 80000 250000 1000 kg 1600 5000 16000 50000 160000 500000 2000 kg 10000 30000 100000 300000 1000000 5000 kg 25000 80000 250000 800000 2500000

Tolerance limits – The maximum possible errors on verification for conventional masses are:

Select the Right ComparatorFor the Calibration of Weights

Sele

ct th

e Ri

ght C

ompa

rato

r

Uncertainty of air buoyancy correctionThe density of the weights (standard and test weight) and air should be close as possible to the conven-tional density of weights (8000 kg/m3) and air (1.2 kg/m3) to achieve smallest uncertainties.

Uncertainty of the balanceSmallest readability and good re-peatability qualities ensure a mini-mum effect on the uncertainty.

METTLER TOLEDO DefinitionsMETTLER TOLEDO defines the weigh-ing ranges of the comparators for re-alistic processing at customers site.

• Number of repetitions according realistic weighing processes for E1: 5 ABA, E2: 3 ABA, F1:2 ABA,

F2 - M3: 1 ABA• Repeatability is calculated load

dependent • The maximum contribution of the

weighing process uncertainty is 80% of the maximum allowed uncertainty (1/3 MPE). The other uncertainty influence factors are covered by the 20% for an stand-ardized environment.

For full uncertainty contribution analysis please contact your sales agent for more details.

23

Manual Comparators

XP6U

Com

para

tor

XP26

C Co

mpa

rato

r

XP20

04S

Com

para

tor

AX20

05 Co

mpa

rato

r

AX10

6 Co

mpa

rato

r AX

206

Com

para

tor

AX10

05 Co

mpa

rato

r

AX10

04 Co

mpa

rato

r

XP20

03S

Com

para

tor

XP50

03S

Com

para

tor

XP10

003S

Com

para

tor

XP32

003L

Com

para

tor

XP26

003L

Com

para

tor

AX12

004

Com

para

tor

XP64

003L

Com

para

tor

XP64

002L

Com

para

tor

XP64

002L

-T Co

mpa

rato

r

XP15

5KS

Com

para

tor

XP60

4KM

Com

para

tor

XP10

03KM

Com

para

tor

XP20

03KL

Com

para

tor

XP60

02KL

Com

para

tor

XP56

C Co

mpa

rato

r

XP50

5 Co

mpa

rato

r

In Mass Metrology, weights are used according guideline of OIML or ASTM that are categorized into accuracy classes E1, E2, F1, F2, M1, M2 and M3 or class 1 to 7 respectively. When determining the weight, the maximum allowed measurement uncertainty of the whole process must be equal or less than 1/3 of the maximum tolerance (mpe) of the weight under test with level of confidence k=2 or 95%. The main contribution factors of the combined measurement uncertainty are following:

Uncertainty of the weighingis the repeatability of the compara-tor with a defined number of weight comparisons per process. The more repetitions of ABA / ABBA are performed, the lower repeatability influence to the weighing uncertainty. METTLER TOLEDO is performing the calculations of the weighing ranges uppon the guaranteed load depend-ent repeatabilities in ABA weighing mode.

Uncertainty of the reference weight The reference weight being used should be at least one class higher than the test object, e.g. E2 standard weights should be used to calibrate weight pieces in class F1. The uncer-tainty contribution of the mass stand-ard is herewith only 1/9 of the MPE of the test weight.

Comparator application rangesThe illus tra tions below show the calculated weighing ranges for OIML weights according OIML R111, based on 5ABA (Class E1 at K=2), for simplified comparison of performance and weighing ranges of different models.

Vacuum, Robotic and Automated Comparators

E1 E2 F1 F2 M1 M2 M3 Weight ± mg ± mg ± mg ± mg ± mg ± mg ± mg 1 mg 0.003 0.006 0.02 0.06 0.02 2 mg 0.003 0.006 0.02 0.06 0.2 5 mg 0.003 0.006 0.02 0.06 0.2 10 mg 0.003 0.008 0.025 0.08 0.5 20 mg 0.003 0.01 0.03 0.1 0.3 50 mg 0.004 0.012 0.04 0.12 0.4 100 mg 0.005 0.016 0.05 0.16 0.5 1.6 200 mg 0.006 0.02 0.06 0.2 0.6 2 500 mg 0.008 0.025 0.08 0.25 0.8 2.5 1 g 0.01 0.03 0.1 0.3 1 3 10 2 g 0.012 0.04 0.12 0.4 1.2 4 12 5 g 0.016 0.05 0.16 0.5 1.6 5 16 10 g 0.02 0.06 0.2 0.6 2 6 20 20 g 0.025 0.08 0.25 0.8 2.5 8 25 50 g 0.03 0.10 0.3 1 3 10 30 100 g 0.05 0.16 0.5 1.6 5 16 50 200 g 0.1 0.3 1 3 10 30 100 500 g 0.25 0.8 2.5 8 25 80 250 1 kg 0.5 1.6 5 16 50 160 500 2 kg 1 3 10 30 100 300 1000 5 kg 2.5 8 25 80 250 800 2500 10 kg 5 16 50 160 500 1600 5000 20 kg 10 30 100 300 1000 3000 10000 50 kg 25 80 250 800 2500 8000 25000 100 kg 160 500 1600 5000 16000 50000 200 kg 300 1000 3000 10000 30000 100000 500 kg 800 2500 8000 25000 80000 250000 1000 kg 1600 5000 16000 50000 160000 500000 2000 kg 10000 30000 100000 300000 1000000 5000 kg 25000 80000 250000 800000 2500000

Tolerance limits – The maximum possible errors on verification for conventional masses are:

Select the Right ComparatorFor the Calibration of Weights

Sele

ct th

e Ri

ght C

ompa

rato

r

Uncertainty of air buoyancy correctionThe density of the weights (standard and test weight) and air should be close as possible to the conven-tional density of weights (8000 kg/m3) and air (1.2 kg/m3) to achieve smallest uncertainties.

Uncertainty of the balanceSmallest readability and good re-peatability qualities ensure a mini-mum effect on the uncertainty.

METTLER TOLEDO DefinitionsMETTLER TOLEDO defines the weigh-ing ranges of the comparators for re-alistic processing at customers site.

• Number of repetitions according realistic weighing processes for E1: 5 ABA, E2: 3 ABA, F1:2 ABA,

F2 - M3: 1 ABA• Repeatability is calculated load

dependent • The maximum contribution of the

weighing process uncertainty is 80% of the maximum allowed uncertainty (1/3 MPE). The other uncertainty influence factors are covered by the 20% for an stand-ardized environment.

For full uncertainty contribution analysis please contact your sales agent for more details.

24

Important The stated specifications and technical data apply only under good ambient conditions. Disruptive factors at the place of installation such as strong drafts (especially from air conditioning equipment), excessive vibra-tions, physical effects of the items being weighed (e.g. magnetic fields or electrostatic charges), or ambient conditions outside the allowable tolerances, may have adverse effects on the specifications.

Tech

nica

l Spe

cific

atio

ns

M_one Comparator M_10 Comparator a5 Comparator a100 / a107 Comparator a1000 Comparator AX107H Comparator AX106H Comparator AX1006 Comparator AX10005 Comparator AX16004 Comparator AX32004 Comparator AX64004 Comparator

Maximum load 1001.5 g 10011 g 5.1g 111 / 111 g 1109 g 111 g 111 g 1011 g 10011 g 16260 g 32260 g 64260 gReadability 0.1 µg 1 µg 0.1 µg 1 / 0.1 µg 10 µg 0.1 µg 1 µg 1 µg 10 µg 0.1 mg 0.1 mg 0.1 mg 0–1 g: 0.15 µg Repeatability at nominal load 1–2 g: 0.25 µg (5x ABA, measured at) 0.5 µg 8 µg 2–5 g: 0.4 µg 1.6 / 1 µg 10 µg 0.8 µg 1.5 µg 2 µg 20 µg 0.2 mg 0.2 mg 0.4 mg 0–1 g: 0.05 µg 1–2 g: 0.15 µg Repeatability typical ABA 0.3 µg 4 µg 2–5 g: 0.35 µg 1.3 / 0.9 µg 5 µg 0.6 µg 1.2 µg 1.5 µg 15 µg 0.1 mg 0.1 mg 0.2 mgElectrical weighing range 1.5 g 11 g 0…6.1 g 0…11 g 0…109 g 0…11 g 0…11 g 0…11 g 0…11 g 0…260 g 0…260 g 0…260 g 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 500, 300, 100, 100 2, 2, 2, 2, 2, 2, 2, 2, 2, Dial weights External External - 50, 30, 10, 10 g 500, 300, 100, 100 g 50, 30, 10, 10 g 50, 30, 10, 10 g 50, 30, 10, 10 g 5, 3, 1 kg 4, 4 kg 8, 8, 4, 4, kg 8, 8, 8, 8, 8, 8, 8 kgLinearity (electrical weighing range) 2 µg ±8 µg ±4 µg ±8 µg ±12 µg ±8 µg ±8 µg ±8 µg ±0.05 mg ±0.5 mg ±0.5 mg ±0.5 mgEccentric load deviation (at test load) 0.0 ng (1 g) 0.0 ng (10 g) 0.0 ng (5 g) 0.0 µg (10 g) 0.0 µg (100 g) 0.0 ng (10 g) 0.0 µg (10 g) 0.0 µg (10 g) 0.0 µg (10 g) 0.0 mg (260 g) 0.0 mg (260 g) 0.0 mg (260 g)

Setting time* 30 s 30 s 20 s 20/30 s 20 s 10 s 10 s 10 s 15 s 25 s 25 s 25 sAdjustment built-in motorized motorized motorized motorized motorized motorized motorized motorized motorized motorized motorized motorizedAdjustment with external weight 1 g 10 g 5 g 10 g 100 g 10 g 10 g 10 g 10 g 200 g 200 g 200 g Standard equipmentWeight handler Turntable, 4 or 6 positions Turntable, 4 positions 3-axis robot 3-axis robot 3-axis robot Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positionsWeight magazin – – 36 positions 30 positions 18 positions – – – – – – –Software and controller Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standardVacuum chamber Round bell jar Round bell jar – – – – – – – – –Draft shield – – Motorized Motorized Motorized Motorized Motorized Motorized Standard Standard Standard StandardSelf centering pan Integrated Integrated – – – Integrated Integrated Integrated Integrated Integrated Integrated IntegratedWeighing pan Hanging pan Hanging pan Fork-shaped Fork-shaped Fork-shaped Hanging pan Hanging pan Hanging pan Hanging pan LevelMatic LevelMatic LevelMatic

SmartScreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen TouchscreenSmartSens Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardLevelControl – – – – – – – – – – – –Separate display Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Admissible environmental conditionsTemperature (°C) 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 Max. temperature change (°C /12h) 0.1 0.1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5Relative Humidity (%) 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 Dimensions 4-Pl.: 274 x 409 x 620 Balance (WxDxH, mm) 6-Pl.: 344 x 440 x 620 315 x 720 x 850 1430 x 890 x 1730 1430 x 890 x 1730 1430 x 890 x 1730 346 x 514 x 432 346 x 514 x 432 346 x 514 x 432 315 x 720 x 850 1200 x 1200 x 1500 1200 x 1200 x 1500 1200 x 1200 x 1500Display unit (WxDxH, mm) 226 x 370 x 155 226 x 370 x 155 224 x 366 x 94 224 x 366 x 94 224 x 366 x 94 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 224 x 366 x 94 224 x 366 x 94 224 x 366 x 94Balance weight (kg) 300 350 290 290 290 23 23 25 85 290 290 290 cylindrical: 4–14 mm cylindrical: 22–90 mm cylindrical: 18-105 mm wire weight: 5.5–18mm Object Diameter (D, mm) spherical: 40–100 mm spherical: 18-110 mm sheet weight: 4–14 mm 6–26 mm 10–60 mm 8–30 mm 8–30 mm 12–60 mm 16–110 mm 50–380 mm 50–380 mm 50–380 mm cylindrical: 16 mm Object Height (H, mm) 100 mm 195 mm wire weight: 6 mm 50 mm 85 mm 70 mm 70 mm 95 mm 200 mm 350 mm 350 mm 350 mmControl unit for weight handler (WxDxH, mm) 202 x 197 x 92 202 x 197 x 92 – – – 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 – – –Vacuum chamber (WxDxH, mm) 684 x 884 x 930 684 x 884 x 930 – – – – – – – – – –Rack for control & display unit Optional Optional – – – – – – – Standard Standard Standard AccessoriesReference weight certified Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalControl software Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardDisc weights – Optional – – – – – Optional Optional – – –Klimet A30 certified 00222012 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalTemperature sensor for Klimet A30 (5m) 00222014 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalProfessional software for weight dissemination 11132540 – – Optional Optional Optional – – – – – – –

Other accessories on request *Shortest setting time of weighing pan

25

Important The stated specifications and technical data apply only under good ambient conditions. Disruptive factors at the place of installation such as strong drafts (especially from air conditioning equipment), excessive vibra-tions, physical effects of the items being weighed (e.g. magnetic fields or electrostatic charges), or ambient conditions outside the allowable tolerances, may have adverse effects on the specifications.

Tech

nica

l Spe

cific

atio

ns

M_one Comparator M_10 Comparator a5 Comparator a100 / a107 Comparator a1000 Comparator AX107H Comparator AX106H Comparator AX1006 Comparator AX10005 Comparator AX16004 Comparator AX32004 Comparator AX64004 Comparator

Maximum load 1001.5 g 10011 g 5.1g 111 / 111 g 1109 g 111 g 111 g 1011 g 10011 g 16260 g 32260 g 64260 gReadability 0.1 µg 1 µg 0.1 µg 1 / 0.1 µg 10 µg 0.1 µg 1 µg 1 µg 10 µg 0.1 mg 0.1 mg 0.1 mg 0–1 g: 0.15 µg Repeatability at nominal load 1–2 g: 0.25 µg (5x ABA, measured at) 0.5 µg 8 µg 2–5 g: 0.4 µg 1.6 / 1 µg 10 µg 0.8 µg 1.5 µg 2 µg 20 µg 0.2 mg 0.2 mg 0.4 mg 0–1 g: 0.05 µg 1–2 g: 0.15 µg Repeatability typical ABA 0.3 µg 4 µg 2–5 g: 0.35 µg 1.3 / 0.9 µg 5 µg 0.6 µg 1.2 µg 1.5 µg 15 µg 0.1 mg 0.1 mg 0.2 mgElectrical weighing range 1.5 g 11 g 0…6.1 g 0…11 g 0…109 g 0…11 g 0…11 g 0…11 g 0…11 g 0…260 g 0…260 g 0…260 g 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 500, 300, 100, 100 2, 2, 2, 2, 2, 2, 2, 2, 2, Dial weights External External - 50, 30, 10, 10 g 500, 300, 100, 100 g 50, 30, 10, 10 g 50, 30, 10, 10 g 50, 30, 10, 10 g 5, 3, 1 kg 4, 4 kg 8, 8, 4, 4, kg 8, 8, 8, 8, 8, 8, 8 kgLinearity (electrical weighing range) 2 µg ±8 µg ±4 µg ±8 µg ±12 µg ±8 µg ±8 µg ±8 µg ±0.05 mg ±0.5 mg ±0.5 mg ±0.5 mgEccentric load deviation (at test load) 0.0 ng (1 g) 0.0 ng (10 g) 0.0 ng (5 g) 0.0 µg (10 g) 0.0 µg (100 g) 0.0 ng (10 g) 0.0 µg (10 g) 0.0 µg (10 g) 0.0 µg (10 g) 0.0 mg (260 g) 0.0 mg (260 g) 0.0 mg (260 g)

Setting time* 30 s 30 s 20 s 20/30 s 20 s 10 s 10 s 10 s 15 s 25 s 25 s 25 sAdjustment built-in motorized motorized motorized motorized motorized motorized motorized motorized motorized motorized motorized motorizedAdjustment with external weight 1 g 10 g 5 g 10 g 100 g 10 g 10 g 10 g 10 g 200 g 200 g 200 g Standard equipmentWeight handler Turntable, 4 or 6 positions Turntable, 4 positions 3-axis robot 3-axis robot 3-axis robot Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positions Turntable, 4 positionsWeight magazin – – 36 positions 30 positions 18 positions – – – – – – –Software and controller Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standard Windows®, standardVacuum chamber Round bell jar Round bell jar – – – – – – – – –Draft shield – – Motorized Motorized Motorized Motorized Motorized Motorized Standard Standard Standard StandardSelf centering pan Integrated Integrated – – – Integrated Integrated Integrated Integrated Integrated Integrated IntegratedWeighing pan Hanging pan Hanging pan Fork-shaped Fork-shaped Fork-shaped Hanging pan Hanging pan Hanging pan Hanging pan LevelMatic LevelMatic LevelMatic

SmartScreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen Touchscreen TouchscreenSmartSens Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardLevelControl – – – – – – – – – – – –Separate display Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Admissible environmental conditionsTemperature (°C) 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 17–27 Max. temperature change (°C /12h) 0.1 0.1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5Relative Humidity (%) 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 45–60 Dimensions 4-Pl.: 274 x 409 x 620 Balance (WxDxH, mm) 6-Pl.: 344 x 440 x 620 315 x 720 x 850 1430 x 890 x 1730 1430 x 890 x 1730 1430 x 890 x 1730 346 x 514 x 432 346 x 514 x 432 346 x 514 x 432 315 x 720 x 850 1200 x 1200 x 1500 1200 x 1200 x 1500 1200 x 1200 x 1500Display unit (WxDxH, mm) 226 x 370 x 155 226 x 370 x 155 224 x 366 x 94 224 x 366 x 94 224 x 366 x 94 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 224 x 366 x 94 224 x 366 x 94 224 x 366 x 94Balance weight (kg) 300 350 290 290 290 23 23 25 85 290 290 290 cylindrical: 4–14 mm cylindrical: 22–90 mm cylindrical: 18-105 mm wire weight: 5.5–18mm Object Diameter (D, mm) spherical: 40–100 mm spherical: 18-110 mm sheet weight: 4–14 mm 6–26 mm 10–60 mm 8–30 mm 8–30 mm 12–60 mm 16–110 mm 50–380 mm 50–380 mm 50–380 mm cylindrical: 16 mm Object Height (H, mm) 100 mm 195 mm wire weight: 6 mm 50 mm 85 mm 70 mm 70 mm 95 mm 200 mm 350 mm 350 mm 350 mmControl unit for weight handler (WxDxH, mm) 202 x 197 x 92 202 x 197 x 92 – – – 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 226 x 370 x 155 – – –Vacuum chamber (WxDxH, mm) 684 x 884 x 930 684 x 884 x 930 – – – – – – – – – –Rack for control & display unit Optional Optional – – – – – – – Standard Standard Standard AccessoriesReference weight certified Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalControl software Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardDisc weights – Optional – – – – – Optional Optional – – –Klimet A30 certified 00222012 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalTemperature sensor for Klimet A30 (5m) 00222014 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalProfessional software for weight dissemination 11132540 – – Optional Optional Optional – – – – – – –


26

The stated specifications and technical data apply only under good ambient conditions. Disruptive factors at the place of installation such as strong drafts (especially from air conditioning equipment), excessive vibrations, physical effects of the items being weighed (e.g. magnetic fields or electrostatic charges), or ambient conditions outside the allowable tolerances, may have adverse effects on the specifications.

Important

Bluetooth Printer BT-P42Dimensions (W x D x H mm) 157 x 210 x 85

Weight 1.5 kg

Tech

nica

l Spe

cific

atio

ns

XP6U Comparator XP26C Comparator XP56C Comparator AX106 Comparator AX206 Comparator XP505 Comparator AX1004 / 1005 Comparator AX2005 Comparator XP2003S Comparator XP2004S Comparator XP5003S Comparator XP10003S Comparator AX12004 Comparator

Maximum load 6.1 g 22 g 52 g 111 g 211 g 520 g 1109 g 2109 g (min. 998 g) 2300 g 2300 g 5100 g 10100 g 12111 gReadability 0.1 µg 1 µg 1 µg 1 µg 1 µg 0.01 mg 0.1/0.01 mg 0.01 mg 1 mg 0.1 mg 1 mg 1 mg 0.1 mgRepeatability at nominal load 0.35 µg (6 g) 1.5 µg (20 g) 3 µg (50 g) 3 µg (100 g) 4 µg (200 g) 0.035 mg (500 g) 0.07/0.02 mg (1kg) 0.04 mg (2kg) 1 mg (2 kg) 0.1 mg (2 kg) 0.8 mg (5 kg) 1 mg (10 kg) 0.25 mg (10 kg) (5x ABA, measured at)Repeatability at low load 0.2 µg (0.2 g) 0.7 µg (1g) 0.7 ug – – 0.01 mg (50 g) – – 0.8 mg (100 g) 0.08 mg (100 g) 0.6 mg (200 g) 0.8 mg (500 g) – (5x ABA, measured at)Repeatability typical ABA 0.15 µg + 1.7E–08 • Rgr 0.5 µg + 4x10–8 • Rgr 0.5 µg + 4x10–8 • Rgr 2 µg (100 g) 2.5 µg (200 g) 0.008 mg + 4.5x10–08 • Rgr 0.05/0.015 mg (1kg) 0.025 mg (2kg) 0.6mg + 9x10–8 • Rgr 0.06mg + 9x10–9 • Rgr 0.4mg + 4x10–8 • Rgr 0.6mg + 1.7x10–8 • Rgr 0.15 mg (10 kg)Electrical weighing range 0…6.1 g 0…22 g 0…52 g 0…11 g 0…11 g 520 g 0…109 g 0…109 g 0…2300 g 0…2300 g 0…5100 g 0…10100 g 0…111 g 50, 30, 10, 10 g; Dial weights – – – 50, 30, 10, 10 g 100 g disc weight – 500, 300, 100, 100 g 500, 300, 100, 100 g – – – – 5, 3, 2, 1, 1 kgLinearity (electrical weighing range) 4 µg (6 g) ±0.006 mg ±0.02 mg ±8 µg ±8 µg 0.2 mg ±0.15/0.12 mg ±0.12 mg ±5 mg ±1 mg ±3 mg ±7 mg ±0.6 mgEccentric load deviation 2 µg (2 g) 0.00 mg (20 g) 0.00 mg (50 g) 0.0 µg (10 g) 0.0 µg (10 g) 0.2 mg (200 g) 0.0 µg (100 g) 0.0 µg (100 g) 4.0 mg (1 kg) 0.0 mg (1 kg) 0.0 mg (2 kg) 0.0 mg (5 kg) 0.0 mg (10 kg) (at test load)Settling time* ≤ 15 s 3.5 s 3.5 s 5 s 5 s 5 s 5 s 5 s 3.5 s 3.5 s 3.5 s 3.5 s 10 sAdjustment built-in ProFACT ProFACT ProFACT ProFACT ProFACT ProFACT ProFACT ProFACT proFACT proFACT proFACT proFACT Built in 100g E2Adjustment with external weight 1…6 g 5…20 g 10…50 g 10 g 10 g 100…500 g 100 g 100 g 1…2 kg 1…2 kg 1…5 kg 2…10 kg 100 g Standard equipmentApplication software Weighing Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighComDraft shield Motorized 2 x motorized 2 x motorized Motorized Motorized Motorized Motorized Motorized Standard Standard Standard Standard StandardSelf centering pan – Hanging pan Hanging pan Hanging pan Hanging pan – Hanging pan Hanging pan Optional LevelMatic LevelMatic LevelMatic Hanging PanBelow the balance weighing Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard –Weighing pan Round & Grid Pan Hanging & Grid Pan Hanging & Grid Pan Hanging Hanging Grid Pan Hanging Hanging Square LevelMatic LevelMatic LevelMatic HangingSmartScreen Color Touch Screen Color Touch Screen Color Touch Screen Touch Screen Touch Screen Color Touch Screen Touch Screen Touch Screen Color Touch Screen Color Touch Screen Color Touch Screen Color Touch Screen Touch ScreenSmartSens Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardLevelControl – Standard Standard – – Standard – – Standard Standard Standard Standard –Separate display Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Admissible environmental conditionsTemperature (°C) 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30Max. temperature change (°C /12h) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5Relative Humidity (%) 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 DimensionsBalance (WxDxH, mm) 128 x 287 x 113 263 x 487 x 322 263 x 487 x 322 241 x 353 x 291 241 x 353 x 291 263 x 487 x 322 241 x 353 x 291 241 x 353 x 291 214 x 260 x 363 214 x 260 x 363 214 x 260 x 363 390 x 480 x 620 837 x 614 x 952Display unit (WxDxH, mm) 224 x 366 x 94 194 x 133 x 58 194 x 133 x 58 224 x 366 x 94 224 x 366 x 94 194 x 133 x 58 224 x 366 x 94 224 x 366 x 94 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 224 x 366 x 94Weighing pan (mm) ∅ 14 Hook / 16 ∅ 35 / 40 x 40 ∅ 35 / 40 x 40 ∅ 60 (45) ∅ 60 (45) 78 x 73 ∅ 100 ∅ 100 125x125 ∅ 130 ∅ 130 ∅ 130 ∅ 220 Balance weight (kg) 4.9 kg 11.5 kg 11.5 kg 13.5 kg 13.5 kg 10.0 kg 13.5 kg 13.5 kg 8.3 kg 8.3 kg 8.3 kg 17.2 kg 62.5 kgObject Diameter (D, mm) 0…9 / 13 0…35 0…35 0…45 0…45 0…73 0…80 0…80 0…125 0…130 0…130 0…130 34…220 Object Height (H, mm) 0…26 / 50 0…72 (235) 0…72 (235) 0…85 (120) 0…85 (120) 235 0…135 0…135 0…248 0…228 0…228 0…335 0…230 AccessoriesReference weight certified Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalSoftware MC Link 11116504 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalKlimet A30 certified 00222012 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalTemperature sensor for Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Klimet A30 (5m) 00222014BT-P42 printer wireless Optional Optional Optional – – Optional – – Optional Optional Optional Optional – bluetooth 11132540RS-P42 printer RS232 00229265 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalExternal draft shield Optional – – Standard Standard Optional Optional Optional Optional Optional Optional – –


Optional Interfaces (XP only)Bluetooth 11132530

Ethernet 11132515

RS232C 11132500

LocalCan 11132505

MiniMettler 11132510

PS/2 11132520

Draft shield model AX Comparator XP W5 XP W12 Dimensions (W x D x H mm) 342 x 514 x 350 223 x 463 x 210 350 x 450 x 450

Weight 7.5 kg 3.2 kg 7.5 kg

Compatible models AX manual XP-U XP-C, XP-S

27


Important

Bluetooth Printer BT-P42Dimensions (W x D x H mm) 157 x 210 x 85

Weight 1.5 kg

Tech

nica

l Spe

cific

atio

ns

XP6U Comparator XP26C Comparator XP56C Comparator AX106 Comparator AX206 Comparator XP505 Comparator AX1004 / 1005 Comparator AX2005 Comparator XP2003S Comparator XP2004S Comparator XP5003S Comparator XP10003S Comparator AX12004 Comparator

Maximum load 6.1 g 22 g 52 g 111 g 211 g 520 g 1109 g 2109 g (min. 998 g) 2300 g 2300 g 5100 g 10100 g 12111 gReadability 0.1 µg 1 µg 1 µg 1 µg 1 µg 0.01 mg 0.1/0.01 mg 0.01 mg 1 mg 0.1 mg 1 mg 1 mg 0.1 mgRepeatability at nominal load 0.35 µg (6 g) 1.5 µg (20 g) 3 µg (50 g) 3 µg (100 g) 4 µg (200 g) 0.035 mg (500 g) 0.07/0.02 mg (1kg) 0.04 mg (2kg) 1 mg (2 kg) 0.1 mg (2 kg) 0.8 mg (5 kg) 1 mg (10 kg) 0.25 mg (10 kg) (5x ABA, measured at)Repeatability at low load 0.2 µg (0.2 g) 0.7 µg (1g) 0.7 ug – – 0.01 mg (50 g) – – 0.8 mg (100 g) 0.08 mg (100 g) 0.6 mg (200 g) 0.8 mg (500 g) – (5x ABA, measured at)Repeatability typical ABA 0.15 µg + 1.7E–08 • Rgr 0.5 µg + 4x10–8 • Rgr 0.5 µg + 4x10–8 • Rgr 2 µg (100 g) 2.5 µg (200 g) 0.008 mg + 4.5x10–08 • Rgr 0.05/0.015 mg (1kg) 0.025 mg (2kg) 0.6mg + 9x10–8 • Rgr 0.06mg + 9x10–9 • Rgr 0.4mg + 4x10–8 • Rgr 0.6mg + 1.7x10–8 • Rgr 0.15 mg (10 kg)Electrical weighing range 0…6.1 g 0…22 g 0…52 g 0…11 g 0…11 g 520 g 0…109 g 0…109 g 0…2300 g 0…2300 g 0…5100 g 0…10100 g 0…111 g 50, 30, 10, 10 g; Dial weights – – – 50, 30, 10, 10 g 100 g disc weight – 500, 300, 100, 100 g 500, 300, 100, 100 g – – – – 5, 3, 2, 1, 1 kgLinearity (electrical weighing range) 4 µg (6 g) ±0.006 mg ±0.02 mg ±8 µg ±8 µg 0.2 mg ±0.15/0.12 mg ±0.12 mg ±5 mg ±1 mg ±3 mg ±7 mg ±0.6 mgEccentric load deviation 2 µg (2 g) 0.00 mg (20 g) 0.00 mg (50 g) 0.0 µg (10 g) 0.0 µg (10 g) 0.2 mg (200 g) 0.0 µg (100 g) 0.0 µg (100 g) 4.0 mg (1 kg) 0.0 mg (1 kg) 0.0 mg (2 kg) 0.0 mg (5 kg) 0.0 mg (10 kg) (at test load)Settling time* ≤ 15 s 3.5 s 3.5 s 5 s 5 s 5 s 5 s 5 s 3.5 s 3.5 s 3.5 s 3.5 s 10 sAdjustment built-in ProFACT ProFACT ProFACT ProFACT ProFACT ProFACT ProFACT ProFACT proFACT proFACT proFACT proFACT Built in 100g E2Adjustment with external weight 1…6 g 5…20 g 10…50 g 10 g 10 g 100…500 g 100 g 100 g 1…2 kg 1…2 kg 1…5 kg 2…10 kg 100 g Standard equipmentApplication software Weighing Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighComDraft shield Motorized 2 x motorized 2 x motorized Motorized Motorized Motorized Motorized Motorized Standard Standard Standard Standard StandardSelf centering pan – Hanging pan Hanging pan Hanging pan Hanging pan – Hanging pan Hanging pan Optional LevelMatic LevelMatic LevelMatic Hanging PanBelow the balance weighing Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard –Weighing pan Round & Grid Pan Hanging & Grid Pan Hanging & Grid Pan Hanging Hanging Grid Pan Hanging Hanging Square LevelMatic LevelMatic LevelMatic HangingSmartScreen Color Touch Screen Color Touch Screen Color Touch Screen Touch Screen Touch Screen Color Touch Screen Touch Screen Touch Screen Color Touch Screen Color Touch Screen Color Touch Screen Color Touch Screen Touch ScreenSmartSens Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardLevelControl – Standard Standard – – Standard – – Standard Standard Standard Standard –Separate display Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Admissible environmental conditionsTemperature (°C) 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30Max. temperature change (°C /12h) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5Relative Humidity (%) 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 DimensionsBalance (WxDxH, mm) 128 x 287 x 113 263 x 487 x 322 263 x 487 x 322 241 x 353 x 291 241 x 353 x 291 263 x 487 x 322 241 x 353 x 291 241 x 353 x 291 214 x 260 x 363 214 x 260 x 363 214 x 260 x 363 390 x 480 x 620 837 x 614 x 952Display unit (WxDxH, mm) 224 x 366 x 94 194 x 133 x 58 194 x 133 x 58 224 x 366 x 94 224 x 366 x 94 194 x 133 x 58 224 x 366 x 94 224 x 366 x 94 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 224 x 366 x 94Weighing pan (mm) ∅ 14 Hook / 16 ∅ 35 / 40 x 40 ∅ 35 / 40 x 40 ∅ 60 (45) ∅ 60 (45) 78 x 73 ∅ 100 ∅ 100 125x125 ∅ 130 ∅ 130 ∅ 130 ∅ 220 Balance weight (kg) 4.9 kg 11.5 kg 11.5 kg 13.5 kg 13.5 kg 10.0 kg 13.5 kg 13.5 kg 8.3 kg 8.3 kg 8.3 kg 17.2 kg 62.5 kgObject Diameter (D, mm) 0…9 / 13 0…35 0…35 0…45 0…45 0…73 0…80 0…80 0…125 0…130 0…130 0…130 34…220 Object Height (H, mm) 0…26 / 50 0…72 (235) 0…72 (235) 0…85 (120) 0…85 (120) 235 0…135 0…135 0…248 0…228 0…228 0…335 0…230 AccessoriesReference weight certified Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalSoftware MC Link 11116504 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalKlimet A30 certified 00222012 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalTemperature sensor for Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Klimet A30 (5m) 00222014BT-P42 printer wireless Optional Optional Optional – – Optional – – Optional Optional Optional Optional – bluetooth 11132540RS-P42 printer RS232 00229265 Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalExternal draft shield Optional – – Standard Standard Optional Optional Optional Optional Optional Optional – –


Optional Interfaces (XP only)Bluetooth 11132530

Ethernet 11132515

RS232C 11132500

LocalCan 11132505

MiniMettler 11132510

PS/2 11132520

Draft shield model AX Comparator XP W5 XP W12 Dimensions (W x D x H mm) 342 x 514 x 350 223 x 463 x 210 350 x 450 x 450

Weight 7.5 kg 3.2 kg 7.5 kg

Compatible models AX manual XP-U XP-C, XP-S

28

IND690Corrosion-resistant – dustproof: The IND690 applica-tion terminal will withstand all industrial environments, wether the challenge comes from aggressive weighing samples, cleaning agents or a wet, corrosive, dusty or hazardous environment. The IND690 will provide reli-able, precise weighing results and error-free functions for years to come.

LevelMatic® 1000 LevelMatic® 5000Contact diameter 460 mm 900 mm

Weight 23.5 kg 98 kg

Compatible models XP155KS XP1003KM XP604KM XP2003KL XP6002KL

LevelMatic®

By using LevelMatic pans the influence of cornerload errors is reduced to a minimum.

Tech

nica

l Spe

cific

atio

ns

XP26003L Comparator XP64003L Comparator XP32003L Comparator XP64002L Comparator XP64002L-T Comparator XP155KS Comparator XP604KM Comparator XP1003KM Comparator XP2003KL Comparator XP6002KL Comparator

Maximum load 26.1 kg 64.1 kg 32.1 kg 64.1 kg 64.1 kg 150 kg 600 kg 1100 kg 2500 kg 5400 kgReadability 1 mg 5 mg 5 mg 10 mg 10 mg 0.05 g 0.1 g 0.5 g 1 g 10 gRepeatability at nominal load (5x ABA, measured at) 3 mg (26 kg) 8 mg (60 kg) 10 mg (30 kg) 25 mg(60 kg) 30 mg (60 kg) 0.12 g (100 kg) 0.23 g (500 kg) 1.5 g (1000 kg) 7 g (2000 kg) 70 g (5000 kg)Repeatability at low load (5x ABA, measured at) 2 mg (1kg) 4 mg (5 kg) 5 mg (2 kg) 10 mg (5 kg) 15 mg (5 kg) 0.09 g (5 kg) 0.15 g (20 kg) 1 g (50 kg) 4 g (100 kg) 50 g (500 kg)Repeatability typical ABA 1.5mg + 6x10–8•Rgr 3.5 mg + 8x10–8•Rgr 4 mg + 2x10–7•Rgr 8 mg + 3x10–7•Rgr 12 mg + 6x10–7•Rgr 0.06 g + 3.2E-07•Rgr 0.11 g + 6.3E-08 •Rgr 0.6 g + 4.2E-07 •Rgr 3 g + 1.3E-06 •Rgr 40 g + 4.2E-06 •RgrElectrical weighing range 0…26100 g 0…64100 g 0…32100 g 0…64100 g 0…64100 g 0…150 kg 0…600 kg 0…1100 kg 0…2500 kg 0…5400 kgLinearity (electrical weighing range) ±25 mg ±50 mg ±40 mg ±50 mg ±50 mg 2 g 10 g 20 g 100 g 300 gEccentric load deviation (at test load) 0.0 g (10 kg) 0.0 g (25 kg) 0.25 g (10 kg) 0.4 g (25 kg) 0.5 g (25 kg) 5 g (50 kg) 40 g (200 kg) 40 g (200 kg) 120 g (1000 kg) 240 g (2000 kg)Settling time* 8 …12 s 8 …12 s 8 …12 s 8 …12 s 8 …12 s 5 s 5 s 5 s 5 s 5 sAdjustment built-in proFACT proFACT proFACT proFACT proFACT proFACT proFACT proFACT proFACT proFACTAdjustment with external weight 5…25 kg 10…64 kg 5…30 kg 10…64 kg 10…64 kg 50…150 kg 200…600 kg 200…1000 kg 500…2500 kg 1000…5000 kg Standard equipmentApplication software Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighComDraft shield Standard Standard Optional Optional – Optional Optional Optional Optional OptionalSelf centering pan Integrated Integrated – – – LevelMatic 1000 LevelMatic 1000 LevelMatic 5000 LevelMatic 5000 LevelMatic 5000Below the balance weighing Standard Standard Standard Standard – – – – – –Weighing pan LevelMatic LevelMatic Square Square Round Square Square Square Square SquareSmartScreen Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardSmartSens Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardLevelControl Standard Standard Standard Standard Standard – – – – –Separate display Standard Standard Standard Standard integrated Standard Standard Standard Standard Standard Admissible ambient conditionsTemperature (°C) 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30Max. temperature change (°C/12h) 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1Relative Humidity (%) 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 DimensionsBalance (WxDxH, mm) 360 x 280 x 185 360 x 280 x 185 360 x 280 x 130 360 x 280 x 130 845 x 445 x 295 800 x 600 x 130 1000 x 800 x 115 1000 x 800 x 115 1500 x 1250 x 182 1500 x 1250 x 182Display unit (WxDxH, mm) 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58Weighing pan (mm) ∅ 220 ∅ 220 360 x 280 360 x 280 ∅ 220 800 x 600 1000 x 800 1000 x 800 1500 x 1250 1500 x 1250Balance weight (kg) 15.7 kg 15.7 kg 10.7 kg 10.7 kg 22 kg 40 kg 91 kg 91 kg 353 kg 353 kgObject Diameter (D, mm) 0…220 0…220 0…280 0…280 0…220 0…600 0…800 0…800 0…1250 0…1250 Object Height (H, mm) 0…395 0…395 – – – – – – – – AccessoriesReference weight certified Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalSoftware MC Link 11116504 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalKlimet A30 certified 00222012 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalTemperature sensor for Klimet A30 (5m) 00222014 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalBT-P42 printer wireless bluetooth 11132540 Optional Optional Optional Optional Optional – – – – –RS-P42 printer RS232 00229265 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalExternal draft shield XP-W Line – – Optional Optional – Optional Optional Optional Optional OptionalTerminal IND690 – – – – – Optional Optional Optional Optional Optional


Draft shield XP W64 XP-WKS XP-WKM XP-WKLDimensions (WxDxH mm) 550 x 470 x 580 1065 x 1065 x 280 1345 x 1345 x 280 1385 x 1635 x 280

Weight (kg) 9.5 18 20 25

Compatible models All XP-L XP-KS XP-KM XP-KL

29

IND690Corrosion-resistant – dustproof: The IND690 applica-tion terminal will withstand all industrial environments, wether the challenge comes from aggressive weighing samples, cleaning agents or a wet, corrosive, dusty or hazardous environment. The IND690 will provide reli-able, precise weighing results and error-free functions for years to come.

LevelMatic® 1000 LevelMatic® 5000Contact diameter 460 mm 900 mm

Weight 23.5 kg 98 kg

Compatible models XP155KS XP1003KM XP604KM XP2003KL XP6002KL

LevelMatic®

By using LevelMatic pans the influence of cornerload errors is reduced to a minimum.

Tech

nica

l Spe

cific

atio

ns

XP26003L Comparator XP64003L Comparator XP32003L Comparator XP64002L Comparator XP64002L-T Comparator XP155KS Comparator XP604KM Comparator XP1003KM Comparator XP2003KL Comparator XP6002KL Comparator

Maximum load 26.1 kg 64.1 kg 32.1 kg 64.1 kg 64.1 kg 150 kg 600 kg 1100 kg 2500 kg 5400 kgReadability 1 mg 5 mg 5 mg 10 mg 10 mg 0.05 g 0.1 g 0.5 g 1 g 10 gRepeatability at nominal load (5x ABA, measured at) 3 mg (26 kg) 8 mg (60 kg) 10 mg (30 kg) 25 mg(60 kg) 30 mg (60 kg) 0.12 g (100 kg) 0.23 g (500 kg) 1.5 g (1000 kg) 7 g (2000 kg) 70 g (5000 kg)Repeatability at low load (5x ABA, measured at) 2 mg (1kg) 4 mg (5 kg) 5 mg (2 kg) 10 mg (5 kg) 15 mg (5 kg) 0.09 g (5 kg) 0.15 g (20 kg) 1 g (50 kg) 4 g (100 kg) 50 g (500 kg)Repeatability typical ABA 1.5mg + 6x10–8•Rgr 3.5 mg + 8x10–8•Rgr 4 mg + 2x10–7•Rgr 8 mg + 3x10–7•Rgr 12 mg + 6x10–7•Rgr 0.06 g + 3.2E-07•Rgr 0.11 g + 6.3E-08 •Rgr 0.6 g + 4.2E-07 •Rgr 3 g + 1.3E-06 •Rgr 40 g + 4.2E-06 •RgrElectrical weighing range 0…26100 g 0…64100 g 0…32100 g 0…64100 g 0…64100 g 0…150 kg 0…600 kg 0…1100 kg 0…2500 kg 0…5400 kgLinearity (electrical weighing range) ±25 mg ±50 mg ±40 mg ±50 mg ±50 mg 2 g 10 g 20 g 100 g 300 gEccentric load deviation (at test load) 0.0 g (10 kg) 0.0 g (25 kg) 0.25 g (10 kg) 0.4 g (25 kg) 0.5 g (25 kg) 5 g (50 kg) 40 g (200 kg) 40 g (200 kg) 120 g (1000 kg) 240 g (2000 kg)Settling time* 8 …12 s 8 …12 s 8 …12 s 8 …12 s 8 …12 s 5 s 5 s 5 s 5 s 5 sAdjustment built-in proFACT proFACT proFACT proFACT proFACT proFACT proFACT proFACT proFACT proFACTAdjustment with external weight 5…25 kg 10…64 kg 5…30 kg 10…64 kg 10…64 kg 50…150 kg 200…600 kg 200…1000 kg 500…2500 kg 1000…5000 kg Standard equipmentApplication software Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighCom Weighing, WeighComDraft shield Standard Standard Optional Optional – Optional Optional Optional Optional OptionalSelf centering pan Integrated Integrated – – – LevelMatic 1000 LevelMatic 1000 LevelMatic 5000 LevelMatic 5000 LevelMatic 5000Below the balance weighing Standard Standard Standard Standard – – – – – –Weighing pan LevelMatic LevelMatic Square Square Round Square Square Square Square SquareSmartScreen Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardSmartSens Standard Standard Standard Standard Standard Standard Standard Standard Standard StandardLevelControl Standard Standard Standard Standard Standard – – – – –Separate display Standard Standard Standard Standard integrated Standard Standard Standard Standard Standard Admissible ambient conditionsTemperature (°C) 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30 10…30Max. temperature change (°C/12h) 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1Relative Humidity (%) 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70 DimensionsBalance (WxDxH, mm) 360 x 280 x 185 360 x 280 x 185 360 x 280 x 130 360 x 280 x 130 845 x 445 x 295 800 x 600 x 130 1000 x 800 x 115 1000 x 800 x 115 1500 x 1250 x 182 1500 x 1250 x 182Display unit (WxDxH, mm) 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58 194 x 133 x 58Weighing pan (mm) ∅ 220 ∅ 220 360 x 280 360 x 280 ∅ 220 800 x 600 1000 x 800 1000 x 800 1500 x 1250 1500 x 1250Balance weight (kg) 15.7 kg 15.7 kg 10.7 kg 10.7 kg 22 kg 40 kg 91 kg 91 kg 353 kg 353 kgObject Diameter (D, mm) 0…220 0…220 0…280 0…280 0…220 0…600 0…800 0…800 0…1250 0…1250 Object Height (H, mm) 0…395 0…395 – – – – – – – – AccessoriesReference weight certified Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalSoftware MC Link 11116504 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalKlimet A30 certified 00222012 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalTemperature sensor for Klimet A30 (5m) 00222014 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalBT-P42 printer wireless bluetooth 11132540 Optional Optional Optional Optional Optional – – – – –RS-P42 printer RS232 00229265 Optional Optional Optional Optional Optional Optional Optional Optional Optional OptionalExternal draft shield XP-W Line – – Optional Optional – Optional Optional Optional Optional OptionalTerminal IND690 – – – – – Optional Optional Optional Optional Optional


Draft shield XP W64 XP-WKS XP-WKM XP-WKLDimensions (WxDxH mm) 550 x 470 x 580 1065 x 1065 x 280 1345 x 1345 x 280 1385 x 1635 x 280

Weight (kg) 9.5 18 20 25

Compatible models All XP-L XP-KS XP-KM XP-KL

30

Klimet A30/A30V climate station Temperature (°C) Resolution 0.001 [°C]

Range 15..25 [°C]

Accuracy ±0.05 [°C]

Relative Humidity Resolution 0.01 [%]

Range 20..80 [%]

Accuracy ±0.15 [%]

Pressure Resolution 0.001 [hPa]

Range 600…1060 [hPa]

Accuracy ±0.04 [hPa]

Klimet A30 sensing system including • Air pressure sensor

• Dew point mirror system

• 1 air temperature sensor

• 4 temperature sensor inputs

• Data logging software including

• Air density calculation CIPM 81/91

• Serial communication

• Direct data link for specific METTLER TOLEDO Mass Comparator Software

Optional • Pressure tight system Klimet A30V for special applications as vacuum (e.g. M_one)

• CO2 content sensor calibrated

• Temperature sensor 2.5 m or 5.0 m cable length

• MCLink Mass Comparator Control Software for online air buoyancy correction

Special weight sets for AX1006 for AX10005 Nominal weight Contents Nominal weight Contents

100 g • 1 kg •

200 g •• 2 kg ••

– 5 kg •

Special weight sets Weight set for AX1006, for deter mination of the first weight decade kg to 100 g, com prising 2x200 g and 1x100 g disk weights.Weight set for AX10005, for determination of the first weight decade 1 kg to 10 kg, com prising 1x5 kg, 2x2 kg and 1x1 kg cylindrical weights.


Important

Cumulated expertiseWe are happy to make the technical experience of our users and ours available to you.

Fundamentals of Mass DeterminationCompiled under the auspicesof Prof. Dr. M. Kochsiek, Federal Institute of Physics and Technology PTB, Braunschweig and Berlin.

Glossary of Weighing TermsA Practical Guide to the Terminology of Weighing.

Tech

nica

l Spe

cific

atio

ns

VC1005X P20 Density Susceptometer S50-K

OIML weight determination 1 g - 1 kg 2 kg - 20 kg 1 g - 50 kgRecommended comparator balance build-in XP32003L XP6U, XP6 or XS3DUWeight handler Turntable, 4 positions – –Readability 10 µg 5 mg 0.1µg, 1 µg or 1/10 µgElectrical range 109 g 32 kg 6.1 g, 6.1 g or 0.8/3 gDial weights 500, 300, 100, 100 g – –Disc Weights (support weight <100 g) 4 pieces – –Measuring time 15 s 15 s 15 sExternal adjustment 100 g 5 kg 5 g, 5 g or 2 gObject diameter (D, mm) 12…94 55…127 ≤ 260Object height (H, mm) 1…94 90…135 ≤ 500Sphere diameter (mm) 12…94 90..135 – Susceptometer specificDipole moment of magnets – – ≤0.1Am²Distance platform / center of magnet Zo – – 18.8...60.0Magnetizing field strengh (max.) – – 2000, 800, 200 A/mRes. magnetization for 1 digit µT (E1) – – ≥ 0.001 / 0.01 / 0.1Res. susceptibility x for 1 digit (E1) – – ≥0.000001 / 0.00001 / 0.0001 OperationComparator balance Standard, build-in Optional OptionalOperating Software - user guided Standard Standard OptionalController - Storage of processes Standard, Windows® Optional OptionalSmartGeo - Weight geometries database – – With optional softwareTouchscreen with Smartsens Standard With XP Comparator With XP ComparatorPrecision thermometer Standard Standard –Fluid Standard Dist. water –Container – Standard –Filling system – Standard –Suceptometer Hardware bridge – – StandardLow permeability /susceptibility reference – – Optional

Admissible environmental conditionsTemperature (°C) 17– 27 17– 27 17– 27Max. temperature change (°C/12 h) 0.5 0.5 0.5Relative Humidity (%) 40 –70 40 –70 40 –70 DimensionsEquipment (W x D x H, mm) 810 x 760 x 1500 300 x 250 x 450 270 x 360 x 160Display unit (W x D x H, mm) 224 x 366 x 94 – –Equipment net weight 94 kg 6 kg 5 kg AccessoriesReference weight certified Optional Optional –10 kg F1 Disc weights – Optional –Susceptometer Software – – Optional, 11116870Susceptometer Comparator XP6U – – Optional, 11122400Susceptometer Comparator XP6 – – Optional, 11122415Susceptometer Comparator XS3DU – – Optional, 11122455Susceptometer Reference – – Optional, 11116858


31

Klimet A30/A30V climate station Temperature (°C) Resolution 0.001 [°C]

Range 15..25 [°C]

Accuracy ±0.05 [°C]

Relative Humidity Resolution 0.01 [%]

Range 20..80 [%]

Accuracy ±0.15 [%]

Pressure Resolution 0.001 [hPa]

Range 600…1060 [hPa]

Accuracy ±0.04 [hPa]

Klimet A30 sensing system including • Air pressure sensor

• Dew point mirror system

• 1 air temperature sensor

• 4 temperature sensor inputs

• Data logging software including

• Air density calculation CIPM 81/91

• Serial communication

• Direct data link for specific METTLER TOLEDO Mass Comparator Software

Optional • Pressure tight system Klimet A30V for special applications as vacuum (e.g. M_one)

• CO2 content sensor calibrated

• Temperature sensor 2.5 m or 5.0 m cable length

• MCLink Mass Comparator Control Software for online air buoyancy correction

Special weight sets for AX1006 for AX10005 Nominal weight Contents Nominal weight Contents

100 g • 1 kg •

200 g •• 2 kg ••

– 5 kg •

Special weight sets Weight set for AX1006, for deter mination of the first weight decade kg to 100 g, com prising 2x200 g and 1x100 g disk weights.Weight set for AX10005, for determination of the first weight decade 1 kg to 10 kg, com prising 1x5 kg, 2x2 kg and 1x1 kg cylindrical weights.


Important

Cumulated expertiseWe are happy to make the technical experience of our users and ours available to you.

Fundamentals of Mass DeterminationCompiled under the auspicesof Prof. Dr. M. Kochsiek, Federal Institute of Physics and Technology PTB, Braunschweig and Berlin.

Glossary of Weighing TermsA Practical Guide to the Terminology of Weighing.

Tech

nica

l Spe

cific

atio

ns

VC1005X P20 Density Susceptometer S50-K

OIML weight determination 1 g - 1 kg 2 kg - 20 kg 1 g - 50 kgRecommended comparator balance build-in XP32003L XP6U, XP6 or XS3DUWeight handler Turntable, 4 positions – –Readability 10 µg 5 mg 0.1µg, 1 µg or 1/10 µgElectrical range 109 g 32 kg 6.1 g, 6.1 g or 0.8/3 gDial weights 500, 300, 100, 100 g – –Disc Weights (support weight <100 g) 4 pieces – –Measuring time 15 s 15 s 15 sExternal adjustment 100 g 5 kg 5 g, 5 g or 2 gObject diameter (D, mm) 12…94 55…127 ≤ 260Object height (H, mm) 1…94 90…135 ≤ 500Sphere diameter (mm) 12…94 90..135 – Susceptometer specificDipole moment of magnets – – ≤0.1Am²Distance platform / center of magnet Zo – – 18.8...60.0Magnetizing field strengh (max.) – – 2000, 800, 200 A/mRes. magnetization for 1 digit µT (E1) – – ≥ 0.001 / 0.01 / 0.1Res. susceptibility x for 1 digit (E1) – – ≥0.000001 / 0.00001 / 0.0001 OperationComparator balance Standard, build-in Optional OptionalOperating Software - user guided Standard Standard OptionalController - Storage of processes Standard, Windows® Optional OptionalSmartGeo - Weight geometries database – – With optional softwareTouchscreen with Smartsens Standard With XP Comparator With XP ComparatorPrecision thermometer Standard Standard –Fluid Standard Dist. water –Container – Standard –Filling system – Standard –Suceptometer Hardware bridge – – StandardLow permeability /susceptibility reference – – Optional

Admissible environmental conditionsTemperature (°C) 17– 27 17– 27 17– 27Max. temperature change (°C/12 h) 0.5 0.5 0.5Relative Humidity (%) 40 –70 40 –70 40 –70 DimensionsEquipment (W x D x H, mm) 810 x 760 x 1500 300 x 250 x 450 270 x 360 x 160Display unit (W x D x H, mm) 224 x 366 x 94 – –Equipment net weight 94 kg 6 kg 5 kg AccessoriesReference weight certified Optional Optional –10 kg F1 Disc weights – Optional –Susceptometer Software – – Optional, 11116870Susceptometer Comparator XP6U – – Optional, 11122400Susceptometer Comparator XP6 – – Optional, 11122415Susceptometer Comparator XS3DU – – Optional, 11122455Susceptometer Reference – – Optional, 11116858


www.mt.com/comparatorsFor more information

Quality certificatesDevelopment, production andtesting under ISO 9001.

Environment management systemunder ISO 14001.

“Communauté Européenne” With this mark we declare that our products comply with all applicable directives.

Mettler-Toledo AGCH-8606 Greifensee, Switzerland Phone +41-44-944 22 11Fax +41-44-944 30 60

Mettler-Toledo Ltd., Port Melbourne, Victoria 3207 Tel. (03) 9644 57 00, Fax (03) 9645 39 35Mettler-Toledo GmbH., A-1230 Wien Tel. (01) 604 19 80, Fax (01) 604 28 80Mettler-Toledo s.a., B-1932 Zaventem Tel. (02) 334 02 11, Fax (02) 334 03 34Mettler-Toledo Ltda., 06455-000 Barueri/São Paulo Tel. (11) 7295 1692, Fax (11) 421 3459Mettler-Toledo Inc., Ontario, CanadaTel (800) 638-8537, Fax (905) 681-8036Mettler-Toledo (Shanghai) Ltd., Shanghai 200233 Tel. (21) 6485 04 35, Fax (21) 6485 33 51Mettler-Toledo, d.o.o., HR-10000 Zagreb Tel. 01 29 58 130, Fax 01 29 58 140Mettler-Toledo, spol, s.r.o., CZ-100 00 Praha 10 Tel. 272 123 150, Fax 272 123 170Mettler-Toledo A/S, DK-2600 Glostrup Tel. (43) 270 800, Fax (43) 270 828Mettler-Toledo s.a., F-78222 Viroflay Tel. (01) 3097 17 17, Fax (01) 3097 16 16Mettler-Toledo GmbH, D-35353 Giessen Tel. (0641) 50 70, Fax (0641) 507 128Mettler-Toledo (HK) Ltd., Kowloon Tel. (852) 2744 1221, Fax (852) 2744 6878Mettler-Toledo, KFT, H-1139 Budapest Tel. (01) 288 40 40, Fax (01) 288 40 50Mettler-Toledo India Pvt Ltd, Mumbai 400 072 Tel. + Fax (22) 2803 11 11Mettler-Toledo S.p.A., I-20026 Novate Milanese Tel. (02) 333 321, Fax (02) 356 29 73Mettler-Toledo K.K., Tokyo 143 Tel. (3) 5762 0606, Fax (3) 5762 0756Mettler-Toledo (Korea) Ltd., Seoul 137-130 Tel. 82-2-3498-3500, Fax 82-2-3498-3555Mettler-Toledo Central Asia, 480009 Almaty Tel. (07) 3272 980 834, Fax (07) 3272 980 835Mettler-Toledo (M) Sdn. Bhd., 40150 SelangorTel. (603) 784 55 773, Fax (603) 784 58 773Mettler-Toledo S.A. de C.V., México C.P. 06430 Tel. (55) 5547 5700, Fax (55) 5547 2128Mettler-Toledo B.V., NL-4004 JK Tiel Tel. (0344) 638 363, Fax (0344) 638 390Mettler-Toledo A/S, N-1008 Oslo Tel. 22 30 44 90, Fax 22 32 70 02Mettler-Toledo, Sp. z o.o., PL-02-822 Warszawa Tel. (22) 545 06 80, Fax (22) 545 06 88Mettler-Toledo C.I.S. AG, 10 1000 Moskau Tel. (095) 921 92 11, Fax (095) 921 78 68Mettler-Toledo (S) Pte. Ltd., Singapore 139959 Tel. 65-6890 0011, Fax 65-6890 0012Mettler-Toledo, SK-83103 Bratislava Tel. (02) 4444 12 20-2, Fax (02) 4444 12 23Mettler-Toledo, d.o.o., SI-1236 Trzin Tel. (01) 530 8050, Fax (01) 562 1789Mettler-Toledo S.A.E., E-08908 Barcelona Tel. (93) 223 76 00, Fax (93) 223 76 01Mettler-Toledo AB, S-12008 Stockholm Tel. (08) 702 50 00, Fax (08) 642 45 62Mettler-Toledo (Schweiz) GmbH, CH-8606 Greifensee Tel. (044) 944 45 45, Fax (044) 944 45 10Mettler-Toledo (Thailand) Ltd., Bangkok 10320 Tel. 66-2-723 0300, Fax 66-2-719 6479Mettler-Toledo Pac Rim AG, Taipei Tel. (2) 2657 8898, Fax (2) 2657 0776Mettler-Toledo Ltd., Leicester, LE4 1AW Tel. (0116) 235 70 70, Fax (0116) 236 5500Mettler-Toledo, Inc., Columbus, OH 43240 Tel. 800-METTLER, Fax (614) 438 4900

Mettler-Toledo AG Laboratory & Weighing TechnologiesPO Box VI-400, CH-8606 GreifenseeTel. +41 44 944 22 11, Fax +41 44 944 30 60

Subject to technical changes©02/2009 Mettler-Toledo AGPrinted in Switzerland 11795840MCG MarCom Greifensee

Australia

Austria

Belgium

Brazil

Canada

China

Croatia

Czech Republic

Denmark

France

Germany

HongKong

Hungary

India

Italy

Japan

Korea

Kazakhstan

Malaysia

Mexico

Netherlands

Norway

Poland

Russia

Singapore

Slovakia

Slovenia

Spain

Sweden

Switzerland

Thailand

Taiwan

United Kingdom

United States

For all other countries

item 02 -11795840 or bs internet 02-2009

Documents