it/datacom products introduction

ava

Amphenol Global Interconnect Systems(AGIS)

IT/Datacom Products Introduction

Dec. 20, 2017

Amphenol AssembleTech(AST)

TS-0049 Rev 13

© Amphenol Corporation-AST • All Rights Reserved • COMPANY CONFIDENTIAL, those RD products are subject to change by Amphenol without prior informing customers

Amphenol A Global Leader in Interconnect Technology

% Sales by Market

2016 Sales$6.3 Billion

Defense

Broadband

MobileNetworks

IT & DatacomMobile

Devices

Automotive

IndustrialComm Air

Amphenol AssembleTech – All About PeopleGeneral Manager

Alan Yang

China XiamenUSA

Texas; Boston

BD Marketing Finance

Production

Customer Service PurchasingOperations

Engineering Quality

HR ITFinance

Warehouse

Logistics

Sales Team Beijing, Shanghai, Shenzhen

PM


Amphenol Global Interconnect Systems(AGIS) Xiamen, China

Amphenol AssembleTech (AST) Xiamen, Fujian, ChinaUL/CSA, TS16949, ISO 9001, ISO 14001, OHSAS 18001, QC080000 Certificate240,000 sq. ft., more than 3,200 employees

Shanghai

Hong Kong

Taipei

One hour flight to : Shanghai, Hong Kong & Taipei ; International Seaport & AirportTop on Best city to live in China.


IT/Data Center Products Introduction

Advanced High‐Speed Ultraport SlimSΛS LP Mini Cool Edge IO PCIe AOC

Main Stream High‐Speed Ultraport SlimSΛS™ OCuLink

Legacy High‐Speed HD MiniSAS MiniSAS SFF‐8639 FPC Retractor Cable chain and Super Light type

Front I/O & Customized Solutions FFC LIF FPC Internal USB3.1

New!

New!New!

New!


Advanced‐Connectivity

HD MiniSAS MiniSAS

SAS 3.0 12G

PCIe Gen4 16G

SAS 4.0 24G

PCIe Gen5 32G

Mini cool edge IO

2014 2015 2016 2017 2018 2019

SlimSAS

SlimSAS LP

OCuLink

HD MiniSASSAS SI standard

comparison

SlimSAS

SlimSAS LP

OCuLink

Cool Edge SAS Note: Amphenol is T10 contribution member

HD MiniSAS

Cool Edge


Product types

Application Support

PCIe3.0(8GT/s)

SAS3.0(12Gbps)

PCIe4.0(16GT/s)

SAS4.0(24Gbps)

OpenCAPI(25Gbps)

PCIe5.0(32GT/s)

Gen-Z(56 GT/s NRZ,112

GT/s PAM4)

Mini Cool Edge IO • •

SlimSAS LP • • • • •

SlimSAS • • • • •

OCuLink • • • •

HD MiniSAS • • • •

PCIe AOC • •

Cool Edge • • •

MiniSAS • •

SFF-8639 • • • •

Products and Application


Applications

Ultraport SlimSAS LP

• Server/Storage/Workstation• Switches/Routers/Base station:

The solutions can be used from chip to chip, chip to backplane and chip to panel.The solutions can support NVlink and OpenCAPI requirement.

MR (Chip to chip): Ultraport SlimSAS LP to Ultraport LP SlimSASVSR (Chip to pluggable module): Ultraport SlimSAS LP to QSFP/QSFP+XSR (Chip to optical engine/memory): Ultraport SlimSAS LP to QSFP/QSFP+


Features and benefitsCompacter size than other connectors, 0.6mm pitch, 1.0mm thickness4X/6X(38pin) and 8X/12X(74pin) connector, 16X/20X(124pin) ETC 2018 Q1Low loss, optimized NEXT (‐45dB at 12.89GHz) and FEXT (‐40dB at 12.89GHz) Support 25 Gbps signal rate(56G PAM4), SAS4.0 24Gbps and PCI‐e 4.0 16GT/s per laneImpedance 85 ohmCustomized SI specification and length34‐29AWG cables are optional

Product Solutions4X/6X right angle (38pin) 8X/12X right angle (74pin)

Status: 1.0mm thick PCB,sample available



4X Right Angle (38pin)


Product Solutions

Status: developing , ETC Jan. 2018

4X Straight(38pin)

4X Left Side‐exit (38pin)

Status: sample available Status: sample available

Status: developing , ETC Jan. 20184X Right Side‐exit (38pin)


Status: 8X developing , ETC Q1 20188X Straight (74pin)

Product Solutions


8X Right Angle (74pin for 32~34AWG)Status: sample available

8X Left Side‐exit (74pin) 8X Right Side‐exit (74pin)Status: sample availableStatus: sample available


Status: 16X developing, ETC Q1 2018Note: The dimensions are preliminary design and will be fine tuned

16X Right Angle (74P+50P=124PIN)


16X Straight (74P+50P=124PIN)

16X Right Side Exit (74P+50P=124PIN) 16X Left Side Exit (74P+50P=124PIN)

Product Solutions


Plug Types Straight Right Angle Right Side Exit Left Side Exit

4X / 6X plug

8X / 12X plug 16X / 20X plug

Plug configuration



4i Active Right Angle OCuLink/MiniLink4i Right angle Low Profile(LP) SlimSAS

4i Right angle standard SlimSAS 15.45

4X Right angle plug

SlimSAS SlimSASLP OCuLink

4X Vertical

receptacle

Height 22.4 13.45 12.01

Width 15.15 17 16.8

Length 15.45 19.41 18.61

Dimensions comparison

SlimSAS, SlimSAS LP and OCuLink Comparison


8i Active Right Angle OCuLink/MiniLink8i Right angle Low Profile(LP) SlimSAS

8i Right Angle SlimSAS

8X Right angle plug

SlimSAS SlimSASLP OCuLink

8X Vertical

receptacle

Height 22.4 13.45 12.11

Width 25.95 25.4 27.4

Length 15.45 14.33 19.5



15.45

Company Confidential • All Rights Reserved • 12/21/2017 •

X8 LP SlimSAS VS OCulink

(X8/12X LP STR cable plug)(X8/12X Oculink STR cable plug)

(X8/12X LP S/E cable plug)(X8 S/E Oculink S/E cable plug)

X8/X12 SlimSAS LP VS OCulink

X8 STR plug

SlimSAS LP OCuLink

X8 Vertical receptacle

Height 15.40 27.96

Width 25.40 27.4

X8 RA plug

SlimSAS LP OCuLink


Height 13.45 12.11

Width 25.40 27.4

Length 14.33 19.5

X8 S/E plug

SlimSAS LP OCuLink


Height 23.45 30.23

Length 33.15 34.45


Connector type

Cable AWG and length

Insertion loss up to 8GHz (Min) Crosstalk up to 8GHz(Max)

Pair1 Pair2 Pair3 Pair4 Pair5 Pair6 Pair7 Pair8 NEXT FEXT

SlimSAS LP(RA)

30AWG 500mm -3.42 -3.72 -3.40 -3.49 -3.49 -3.44 -3.54 -3.49 -50.43 -43.94

30AWG 1000mm -5.92 -5.67 -5.66 -5.92 -6.03 -5.71 -5.60 -5.86 -51.01 -46.44

SlimSAS(STR)

30AWG 500mm -3.80 -4.07 -3.77 -3.81 -3.70 -3.57 -3.82 -3.60 -50.02 -38.85

30AWG 1000mm -6.07 -6.18 -6.09 -6.01 -6.08 -6.01 -5.95 -5.92 -51.17 -41.37

Oculink(STR)

30AWG 500mm -5.00 -5.31 -5.21 -5.16 -4.83 -5.04 -4.77 -4.99 -45.44 -36.77

30AWG 1000mm -7.98 -8.34 -8.17 -8.03 -8.20 -8.18 -8.11 -8.10 -46.36 -39.62

SI performance comparison

Connector type


Insertion loss up to 12.89GHz (Min) Crosstalk upto 12.89GHz(Max)


SlimSASLP

(RA)

29AWG 457mm -3.28 -3.22 -3.17 -3.08 -3.24 -3.17 -3.30 -3.11 -50.29 -41.24

30AWG 500mm -4.73 -4.66 -4.47 -4.48 -4.43 -4.49 -4.49 -4.30 -48.88 -41.11

30AWG 1000mm -7.79 -7.46 -7.33 -7.71 -7.70 -7.52 -7.36 -7.54 -49.82 -43.76

SlimSAS(STR)

30AWG 500mm -5.66 -5.50 -5.59 -5.25 -6.03 -5.67 -5.82 -5.50 47.88 -37.67

30AWG 1000mm -8.67 -8.41 -8.32 -8.43 -8.71 -8.71 -8.59 -8.36 -47.50 -39.40



Cable Bending Radius Matrix

Item Gauge Min bending radius2.5 X 2 layers cable thickness

Cable thickness

1 30AWG 4 0.81

2 32AWG 3.75 0.75

3 34AWG 3.15 0.63

Minimum cable bending radius reference

Reference cable impedance :85 Ohm, Unit:mm


Case A: Standard X8 RA Plug SlimSAS and LP X8 RA Plug SlimSAS

Remarks:1. Release the Standard X8 RA Plug latch first, and then release the LP X8 RA Plug pull tab;2. Reserve 1mm gap between the connectors ;3. Recommended Pitch: 11.0mm between receptacles, please evaluate the feasibility of PCBA routing.

1st release

2nd pull tab release


Case B: X8 STR Plug(low latch) SlimSAS and LP X8 RA Plug SlimSAS

Remarks:1. Release the Standard X8 STR Plug latch first, and then release the LP X8 RA Plug pull tab;2. Reserve 1.0mm gap between the connectors ;3. Recommend Pitch:11.0mm , please evaluate the feasibility of PCBA routing.

1st release

2nd pull tab release


Case C: Standard X8 Str Plug(low latch) SlimSAS X 2

Remarks:1. Release the left side STR Plug latch first, and then release the right side X8 STR Plug;2. Reserve 1.0mm gap between the connectors ;3. Recommended Pitch : 7.75mm, please evaluate the feasibility of PCBA routing ;

1st release

2nd release


Case D: X8 STR Plug OCuLink and X8 RA Plug OCuLink

Remarks:1. Release the X8 STR Plug latch first, and then release the right side X8 RA Plug;2. Reserve 1.0mm gap between the connectors ;3. Recommend the Pitch: 8.75mm, please evaluate the feasibility of PCBA routing.

1st release

2nd release


Amphenol’s Mini Cool Edge IO™ is a flexible, robust, and cost effective connector and cable assembly solution that help server and networking equipment design flexibility, reduce overall space, and extend the reach for high data rate signals. The solution can be used in PCIe Gen5 and Gen‐Z applications.

Mini Cool Edge IO

Application

• Data center & Networking Equipment

• Servers/Storage Devices

• High Performance Computing (HPC)

• Switches/Routers

• Wireless Base Stations and Radios



Add in CardApplications

Card edge vertical Applications

BackplaneApplications

Card Edge HorizontalApplications

Cable to BoardApplications

Mini cool edge IOInterconnect Platform Design


Mini cool edge Right Angle plug

Mini cool edge Vertical receptacle

Status: 4X/8X/16X under developing, samples ETC Q1 201824X ETC 2018

Position quantity Differential Pair Channel

38 12 4X+10 Sideband

50 16 8X


100 32 16X


148 48 24X(16X+40 Sideband)

Mini Cool Edge IO

Product solutions:


19.4029.80

12.9

5

Mini Cool Edge IO

8X dimension reference:

8X(74pin) mated connector


Board receptacle

8X Vertical

8X Right Angle

Mini Cool Edge IO


Straight Right Angle Right Side Exit Left Side Exit

4X +Sideband plug

8X plug 8X +Sideband

plug

16X plug 16X

+Sideband plug

24X plug

Mini Cool Edge IOConfiguration Matrix


Features and Benefits Pitch 0.6mm connector design

1.57mm PCB card thickness compatible with PCIe riser card

Straight, right angle, side exit and customization cable plug are optional

4X(38pin), 8X(50pin & 74pin) and 16X(100pin & 124pin) connectors are optional

Supports 85 ohm impedance applications

Supports signaling rates up to PCIe5 32GT/s, 56 GT/s NRZ and 112 GT/s PAM‐4.

30‐34AWG cable

Mini Cool Edge IO


SI Simulation PerformanceMini Cool Edge IO


SlimSAS is for next generation SAS‐4 which proven high speed connector and ribbon cable friendly design that supports blade and mainstream server designs. SlimSAS connector shall meet the SAS4 24 Gbps or PCIe Gen4 16GT/s electrical performance requirements.

Ultraport SlimSAS

4X SlimSAS (38pin)

8X SlimSAS (74pin)

Product Solutions

Straight(STR) Side‐exit(SE) Right angle(RA)

Straight(STR) Side‐exit(SE) Right angle(RA)

Reverse Right angle(RRA)

Reverse Right angle(RRA)


Total solution with great robustnessMeet robust design for total solution and pass wrenching test

Diverse solution and short lead time• Connector 4X/6X: 38pin, 8X/12X: 74pin,• Connector shape: straight, right angle, right side‐exit and left side‐exit • Impedance: 85 Ohm and 100 Ohm• 30AWG~34AWG cable • Loose cable or ribbon cable • Standard type and narrow type connector Excellent electrical performance and higher transmission speed,

High speed reach SAS4 24Gbps, PCIe Gen4 16GT/s and OpenCAPI 25Gbps, Ethernet 25~28Gbps per lane

Smaller size• Pitch 0.6mm: smaller than Mini SAS and HD Mini SAS• Total volume: smaller than Mini SAS, HD Mini SAS connector and others Multi‐application

Widely used in SAS, PCIe, OpenCAPI 25G and more.

Features and Benefits

Ultraport SlimSAS


OCuLink

Features and Benefits Diverse solution and short lead time

•Connector 4X: 42pin, 8X: 80pin,•Plug type: straight, right angle, right side‐exit ad left side‐exit, reverse button •Impedance: 85 Ohm•30AWG~34AWG for 4X, 32~34AWG for 8X•Loose cable or ribbon cable •Active latch and passive latch

Excellent electrical performance and higher transmission speedHigh speed reach SAS4 24Gbps and PCIe Gen4 16GT/s per lance

Small sizePitch 0.5mm: smaller than Mini SAS and HD Mini SASTotal volume: smaller than Mini SAS and HD Mini SAS connector

PCI Express OCuLink is a companion specification to the PCI Express Base Specification. The primary focus is the implementation of Internal and external small Form factor PCI Express connectors and cables optimized for the client and mobile market segments. This product can be applied to PCIe Gen4 16GT/s and SAS4.0 24Gbps signal transmission.

Application Servers, workstations, consumer electronics and so on.


OCuLinkProduct Type

8X active and passive OCuLink (80pin)

4X active and passive OCuLink (42pin)

Straight (STR) Right Angle(RA) Left Side‐exit(SE) Right Side‐exit(SE)

Straight (STR) Right Angle(RA)



4i Straight SlimSAS

12.7

4i Straight OCuLink

4X Straight plug

SlimSAS OCuLink

4X Right Angle receptacle

Height 6.95/8.46 6.99

Width 15.15 16.8

Length 25.3 30.08

SlimSAS and OCuLink Comparison


4X Side exit plug

SlimSAS OCuLink

4X RA receptacle

Height 8.46 5.86

Width 23 24

Length 32.25 25.58

X4 Left Side Exit SlimSAS (38pin) X4 Active Left Side Exit OCuLink (42pin)





Connector type


Insertion loss up to 8GHz (Min) Crosstalk up to 8GHz(Max)


SlimSAS(STR)

30AWG 500mm -3.80 -4.07 -3.77 -3.81 -3.70 -3.57 -3.82 -3.60 -50.02 -38.85

30AWG 1000mm -6.07 -6.18 -6.09 -6.01 -6.08 -6.01 -5.95 -5.92 -51.17 -41.37

Oculink(STR)

30AWG 500mm -5.00 -5.31 -5.21 -5.16 -4.83 -5.04 -4.77 -4.99 -45.44 -36.77

30AWG 1000mm -7.98 -8.34 -8.17 -8.03 -8.20 -8.18 -8.11 -8.10 -46.36 -39.62

SI performance comparison

SlimSAS 4X before molding OCuLink 4X before assembling cover


8i Straight SlimSAS 8i Straight Active OCuLink

8X Straight plug

SlimSAS OCuLink

8X Right Angle receptacle

Height 6.95/8.54 6.86

Width 25.95 27.4

Length 25.3 30.3




Application• Server and Storage• Radio Units and Networking • Expansion slot• Peripheral card PCI

Middle plane

Mother board

SlimSAS connector

Cool edge connector

Cool Edge Solution


Features and benefits1. Slimmer design suitable for high density system than legacy PCIe, signal pitch 0.8mm for Cool Edge, 0.65mm for Slim Cool Edge

2. Power pitch 9.10mm for Cool Edge, 1.30mm for Slim Cool Edge3. 2 to 6 power pins (25A/pin) & 20 to 200 differential signal pins for Cool Edge4 to 12 power pins (3A/pin) & 20 to 200 differential signal pins for Slim Cool Edge

4. Receptacle and mating card are available5. Support 1.6mm and 2.36mm mating card 6. Support high speed from 12.5Gbps, 16Gpcs up to 32Gb/s (or 56Gb/s PAM4) 7. Support 85 Ohm and 100 Ohm platforms 8. Support SAS, SATA, PCIe (Gen3/4) and networking9. Suitable for cost sensitive applications

Cool Edge Solution


Cool Edge Cable Solutions

Mating cardCool edge receptacle

Receptacle and mating card

1. Cool edge receptacle and mating card2. 2 to 6 power pins & 20 to 200 differential signal pins for Cool Edge3. 4 to 12 power pins & 20 to 200 differential signal pins for Slim Cool Edge4. Cool edge/Slim Cool edge to Cool edge/Slim Cool edge/SlimSAS/HD MiniSAS cable

Cool edge receptacle with cable

Slim Cool edge receptacle


PCIe 4X AOC Assembly

After cover assemblyBefore cover assembly

PCBA with OE engine SFF-8654 Structure Definition

SFF-9400 Pin-Out Definition

SFF-8636 Software Definition

Status: developing, mockup sample available

SlimSAS Connector With metal shell


Features and benefits

PCIe AOC

Items PCIe AOCPCBA

Dimension(mm) L:W:T=29.04 x 13.96 x 1.00(mm)

Temperature(˚C) 0~70

Bending Radius(mm) <30mm

Cable Diameter(mm) <3.5mm

EMI Metal shell

Bite Rate(Gbps) Typical 4x 10Gbps, upgradable to higher bite rate

Input and output signal

Support PCIe 3.0 signal, upgradable to PCIe 4.0

AOC Length(m) Typical 10m

Optical Fiber quantity 12pcs or 8pcs

Power Delivery USB Supply

Applications• Server• Data center


HD Mini SAS

Features and Benefits Transmission speed up to 12Gbps (SFF‐8643, upgradable to 24Gbps) Compact connector size design, pitch 0.75mm Increased I/O density for current standard mechanical architectures Improved signal integrity performance/crosstalk High performance cable Smaller cable package

4X HD Mini SAS (36pin)

8X HD Mini SAS (72pin)


Mini SAS Connectors

Mini SAS

1 26pos Mini SAS

2 36pos Mini SAS

3 50pos Mini SAS

4 68pos Mini SAS

Features and Benefits Transmission speed up to 6Gbps and 12Gbps (SFF‐8086/SFF‐8087) Compact connector size design, pitch 0.8mm 4X channels: 26pin and 36pin, 8X channels: 50pin and 68pin


Features and Benefits Mini SAS/HD MiniSAS/SlimSAS/power connector SI performance meet SAS3.0/4.0 spec or PCIe4.0 Signal speed can be up to 24Gbps when using SlimSAS connector Cable retractor concept and space saving. Cable chain steer the retractor direction as per request Flexible movement in chassis. Cable chain can protect the raw cable for longer life. Customization

Application Server storage RAID (redundant array of individual disks) HBA (Host Bas Adapters) Network Equipment

Cable Chain


Product Solution Chain type: cover, non‐open and split type

Mini SAS / HD Mini SAS / SlimSAS / Power cable assembly / Customization cable chain

Cable Chain

Mini SAS cable chain HD Mini SAS + power cable chain SlimSAS + power cable chain

Cover type chain Non‐open type chain Split type chain

Product Solution Retractable HD MiniSAS + power cable assy Customized MiniSAS, SlimSAS MiniSAS, OCuLink and power cable assy

After extension Before extension

After system assembly

130mm

Super Light cable chain

Cover

Telescopic poleAssembled by server customer

70mm

Note: the reference dimensions for 4 layers 30AWG signal cable and 1 layer 18AWG power wire

40mm

640mm


FPC Retractor

Electrical and Mechanical Performance Power: 12V 16A Differential impedance: 100±10Ω, 16 pairs signal, 8 sidebands Meet SAS3.0 spec, attenuation: Max ‐9dB at 6GHz FPC Width: 58.95mm, extension length 534mm minimum is counted from connector inside Mechanical mating cycle: 1000 times Min.


SFF‐8639 Cable

68Pin connector Flexible pinout concept Support PCIe Gen4 (16GT/s) Support SATA3.2 (6Gbps) Support SAS3.0 (12Gbps) Support power High signal integrity performance


Target ApplicationsDesktopWorkstationServerSSD

Product Solutions• SFF‐8639 to SATA cable assembly• SFF‐8639 to MiniSAS cable assembly• SFF‐8639 to HD MiniSAS cable assembly• SFF‐8639 to SlimSAS cable assembly• SFF‐8639 to power cable assembly• Customization

SFF‐8639 to SFF‐8639 SFF‐8639 to HD MiniSAS + Power SFF‐8639 to HD MiniSAS SFF‐8639 to MiniSAS + Power


SFF‐8639 Connector Solutions

Straight (AST8639-001)

Straight with latch(AST8639-002)

Straight with wing (AST8639-007)

Straight With Screw Nut (AST8639-003)

Straight With Screw Nut (AST8639-006)

Right Angle (AST8639-008)

Right Angle With Holes (AST8639-004)


High speed data transmission and support VGA, USB2.0/3.0 transmission speed up to 5Gbps @800mm Max lengthHybrid FFC with power , differential pair, LED and switch control signal Easy to assemble with locking latches Easy to fold and easy routingLighter and thinner than copper cable, thickness =1.5mm MaxTurn key solutions

Embedded computing FFC+LIF

LIF connector: pitch 1mm, 15, 20 and 24pin are available, other pins can be scalable 3 series LIF connectors are optional: vertical and RA connector, Low profile with metal pull tab FFC cable: 15, 20 and 24pin are available, other pins can be scalable

Connector and Cable solutions

ApplicationsFront panel I/O module for computer, server and storageInternal interconnection for gaming machine and vending machine

Features and benefits


FFC & LIF to VGA + 2X USB2.0 A LIF to LED + Switch + Mini USB Customization

FFC+LIF Solution

Low profile Vertical LIF Connector with metal pull tab

Right Angle LIF Connector

Vertical LIF Connector

Front Panel

MB

VGA


VGA FFC Cable

USB3.0 FFC CableUSB3.0 AUSB3.0 A


Front Panel

MB


Non‐high Speed FFC Cable



FPC

Applications for legacy marketing

Bladed ServerConsumer electronicsMobile device and TabletHard drive sledsDocking station/PC accessary

New Marketing Focus

Digital cameraInfotainment radio headNon‐invasive medical deviceAR/VR headsetSurveillance equipment/security equipment

(control signal, power, pogo, LED, microphone and USB)

FPC solution

Board to board connector

Board to board connector


Compact connector: 0.8mm pitch, Key‐A and Key‐B 20pins, scalable to 40pin in future Support total 3A for 20pins and 6A for 40pins Transmission speed up to 20Gbps Impedance: 85+/‐9 ohm at mated area 20pins solution supports 1 USB Type‐C signal or 1 or 2 standard A signal transmission 40pins solution supports 2 USB Type‐C signal, or 1 USB Type‐C and 1 standard A signal,

or 2 standard A signal transmission 30AWG~34AWG cable


Internal USB3.1

Application

Direct connect to USB port(picture is only for reference)

Through a daughter card(picture is only for reference)

MS

Desktop, workstation and server


Internal USB3.1 Key‐A plug (to 1 Type‐C port or 1 standard A port) Internal USB3.1 Key‐B plug (to 2 standard A ports)

Product Solutions

Internal USB3.1 20pin Internal USB3.0 20pin for dim. comparison

Key‐A 20pin Key‐B 20pin

Internal USB3.1


3. Key‐B plug to 2 Standard A receptacles

1. Key‐A plug to 1 Type‐C connector

2. Key‐A plug to 1 standard A receptacle

Key‐A and Key‐B pin‐out

Internal USB3.1


Internal USB3.1 Key‐A plug to 1 standard A receptacle Internal USB3.1 Key‐A plug to 1 Type‐C receptacle Internal USB3.1 Key‐B plug to 2 Standard A receptacles Internal USB3.1 plug to Internal USB3.1 plug

Cable Typical Solutions

Internal USB3.1 to 2x Standard AInternal USB3.1 to Internal USB3.1

Internal USB3.1

Status: samples are available


Amphenol can provide various of fly‐wire panel and cable assembly product according to customer requirement for server application solution.

Internal USB3.0

Customized Wire HarnessMini grid IDC w/latch

Front I/O Front I/O

Customized Wire Harness

Wire routing and wire management experts Design and Manufacture Molded components to decrease labor of assembly and installation

All connector and component terminations

Customized Wire Harness and Front I/O

Thank You!We Value your business

Note: please visit our website www.amphenol‐ast.com to register account and password, then download more product technical information after we approve.

it/datacom products introduction

Documents