ise 370 project: create a machined part using the computer numerically controlled (cnc) machine...
TRANSCRIPT
ISE 370 Project: Create a ISE 370 Project: Create a Machined Part Using the Machined Part Using the Computer Numerically Computer Numerically
Controlled (CNC) MachineControlled (CNC) Machine
Mercer University School of Engineering Industrial Engineering Course Project
David Harris (Industrial Engineering)Russell Hazelrig (Industrial Engineering)
Chris Meador (Industrial Engineering)
Project Goal and SolutionProject Goal and Solution
Develop design of partChoose material (blue wax)Draft dimensioned drawing in AutoCADWrite program using G-codeUse Computer Numerically Controlled
(CNC) Machine to manufacture part Use Coordinate Measuring Machine (CMM)
to check part quality
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 2
Dimensioned DrawingDimensioned Drawing
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 3
Partial Code for CNC Production Partial Code for CNC Production of Crossof Cross
N1 07778 CROSS N2 M6 T5 N3 G0 G90 S1500 M3 E1 X0 Y0 N4 H5 Z1.0 D5 N5G41 X1.2094 Y-0.2969 N6 G1 Z-0.5 F20 N7 G1 X1.7906 Y-0.2969 N8 G3 X1.7906 Y-1.2749 R+1.2456 N9G3 X1.2597 Y-0.9780 R+1.4872 N10 G1 X1.4523 Y-1.1551 N11 G1 X1.2597 Y-1.3311 N12 G3 X0.5812 Y-1.3311 R+1.4872 N13 G3 X0.5812 Y-2.9062 R+3.1470 N14 G1 X0.0 Y-2.9062
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 4
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 5
Verify Dimensions Using CMM Verify Dimensions Using CMM MachineMachine
Final Machined Part – The CrossFinal Machined Part – The Cross
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 6
Dr. Joan Burtner, Chair Recruitment and Retention Committee Email: [email protected]
Mercer University School of Engineering 1400 Coleman Avenue Macon, GA
Phone: (478) 301- 4127
Contact InformationContact Information
Mr. Bill Campbell Engineering Lab Supervisor Mercer University School of Engineering 1400 Coleman Avenue Macon, GA
AcknowledgementsAcknowledgements