ir dr ahmad razlan yusoff c.eng, mimeche, p.eng professor · students, 10 master students and more...

IR DR AHMAD RAZLAN YUSOFF C.Eng, MIMechE, P.Eng

Professor

Faculty of Manufacturing and Mechatronic Engineering Technology, Universiti

Malaysia Pahang, 26600 Pekan, Pahang, MALAYSIA.

Tel: +609-4245808, Fax: +609-4245888,

H/P:+6013-9339934

770613-03-6243

Email: [email protected]

ACADEMIC QUALIFICATION

PhD (Mechanical Engineering)-University of Sheffield, United Kingdom, 2010

M.Sc in Mechanical Engineering-Applied Mechanics, Universiti Sains Malaysia, 2003 B.Eng (Hons) Mechanical Engineering, Universiti Sains Malaysia, 2000

Certificate of Education Training, Northern Illinois University, United State of America, 2011

BRIEF PROFILE

Prof Ir Dr Ahmad Razlan Yusoff holds a PhD in the area of Mechanical Engineering from the University of Sheffield, United Kingdom in 2010. Before that, he was studied B.Eng (Hons) and MSc in the same area from Universiti Sains Malaysia, Malaysia in 2000 and 2013. He received study sponsorship award in his degree, master and PhD study, the best papers in international conferences (IDECON, ICMER, AIGEV) and several medal awards in several local and international exhibitions (Archimedes, MTE, IENA, I-TEX, BIS, MOSTI, and CITReX). He also received a Professional Engineer from Board of Engineers Malaysia, Chartered Engineer from I-MechE, UK, UMP excellent service award (2006, 2013, 2017), Cendekia Bitara (2011, 2015, 2016, 2017) and UMP community figure award (2016). He joined University of Sheffield as a PhD student and researcher where he participated in 3 ESPRC grants (UK). At present, he is a professor and former deputy dean of academic and research in the Faculty of Manufacturing Engineering at Universiti Malaysia Pahang, Pahang, Malaysia. His research interests include Advanced Machining Technology, Tool, Die & Mold and Vibration Applications and received several research grants as a leader including national research grants such as FRGS(2), PRGS(1), MTUN(2) and E-Science(1) with an amount of RM1.023 mil (USD206,000). Dr. Razlan has graduated 4 PhD students, 10 master students and more than 55 final year project students, now actively supervised 5 PhD students and have published 10 books, 85 journals and 65 conference papers in several conferences. He also appointed as external examiners and advisors for 8 technical institutions and university in Malaysia. In the national level, as FRGS panel appointed by Ministry of Higher Education and Malaysia Qualification Agency (MQA), Engineering Accreditation Council (EAC) and Engineering Technology Accreditation Council (ETAC) panels for Board of Engineers, Malaysia, and I-TEX research product exhibition panel. He also served internationally as Guest and Visiting Professor at several universities in Turkey, Indonesia, and Japan. At industry, he appointed as Research Fellow in several national companies such as Sapura Machining, TT Electronics, VAC and Prasarana for consultation jobs. To serve community, he is appointed as chairman for Brotherhood Care, former member of Majlis Bersama Jabatan (UMP-MBJ), chairman for ILMUWAN UMP (NGO), former vice president for Persatuan Akademik UMP (PAKAD), deputy secretary for Masjid Fatimah Az-Zahra’, Indera Sempurna Kuantan (MAFAZ), Deputy Chairman, Ahli Jemaah Pengurusan Sistem Pendidikan Al-Irsyad, former president for Pahang state NGO: Persatuan Pembimbing Masyarakat Sejahtera (PPMS), vice president, Malaysia Society of Structure Health Monitoring and Advisor for Sek Men Hajjah Kalsom (SHARK) for F-1 in schools project which national champion for 4 times.

ADVISORY/WORKING EXPERIENCE/CURRENT POSITION

Visiting Professor, Akdeniz University, Turkey, 2019

Guest Professor, Universitas Serambi Mekah, Indonesia, 2018

Guest Professor, Universitas Batam, Indonesia, 2017

Guest Professor, Iwate University, Japan, 2016, 2018

Guest Professor, Universitas Teknologi Yogyakarta, Indonesia, 2015

Product Exhibition Panel, International Invention, Innovation and Technology Exhibition, 2016, 2017,2018,2019

Research Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2016,2017,2018, 2019 (National Level) External Assessor, Terengganu Advanced Technical University College (TATIUC), 2017.

External Assessor, Politeknik Muazam Shah, Muazam Shah, Pahang, 2018. Academic Auditor Panel, Malaysia Qualification Agency (MQA) 2017 Academic Auditor Panel, Enginering Accreditation Council (EAC) 2018 Academic Auditor Panel, Enginering Technology Accreditation Council (ETAC) 2018, 2019 External Assessor, DRB-HICOM University of Automotive Malaysia, 2017. Technical Advisor Panel, Kolej Kemahiran Tinggi Mara, Kuantan 2014. Technical Advisor Panel, Japan Malaysia Technical Institute (JMTI) 2013-2015, 2016-2018,2019-2020. Technical Advisor Panel, Kolej Kemahiran Tinggi Mara, Kemaman 2013. Industrial Advisor Panel, Politeknik Sultan Ahmad Shah, Kuantan, 2012-now.

Associate Professor, Universiti Malaysia Pahang, 2015-2019

Senior Lecturer, Universiti Malaysia Pahang, 2010-2014

Lecturer, Universiti Malaysia Pahang, 2004-2010

Lab demonstrating, University of Sheffield 2009-2010

Lab coordinator, Open University Malaysia 2006-2007

Lecturer, Kolej Linton, Ipoh, Perak 2003

Research Assistant - Universiti Sains Malaysia 2000-2002

RESEARCH INTEREST

1. Advanced Machining Technology: Machining dynamics, cutting tools, lubrication and machinability 2. Tool, Die and Mold : Hot press forming, direct recycling process, die & mold

3. Vibration Applications: Signal processing, energy harvester, passive & active damper/absorber

RESEARCH GRANT

2019

1. Improvement of energy in production lines, heating ventilation and air conditionings (HVAC) integration

systems in electronic company, (RDU192412) MTUN Macthing industrial grant (Leader) RM 104 300.00,

20/05/2019-19/11/2020. External grant.

2. Sustainable machining process using uncoated carbide for machining SS106, (RDU190348) UMP

(Leader) RM 30 000.00, 01/01/2019-31/12/2021. UMP internal grant

3. Investigation on Distribution Mechanism of Oil Mist Impinging on Solid Surface, (RDU190124) FRGS

(Member) RM 79 270.00, 01/01/2019-31/12/2021. External grant.

4. Effects of bituminous cup lumps (BC) as an aggregate coating on the properties of bituminous mixture for

road construction, (RDU190155) FRGS (Member) RM 76 000.00, 01/01/2019-31/12/2021. External grant

2018

5. Experimental study of nozzle influence on oil mist adhesion after milling process of automotive parts,

(RDU1803129) UMP Grant (Member) RM 37 100.00, 15/08/2017-14/08/2019. Internal grant.

6. Development of ball tip milling abrasive finishing to improve surface finish of biocompatibke materials,

(RDU180324) UMP Grant (Member) RM 26 500.00, 15/08/2017-14/08/2019. Internal grant.

7. Fuzzy logic based direct torque algorithm of induction motor, (RDU180399) UMP Grant (Member) RM

20, 000.00, 15/08/2017-14/08/2019. Internal grant.

2017

8. Prototype Development of Optimum Irregular Milling Tools for Chatter Supression in Machining

Automotive Product, (RDU170801) PRGS (Leader) RM 77 760.000, 15/08/2017-14/08/2019. External

grant.

9. An investigation into the effects of resonance on th time delay estimation for leak detection in plastic

water distribution pipes, (RDU1701) FRGS (Member) RM 89 803.000, 15/08 /2017-14/08/2019. External

grant.

10. Suppression of chatter at high speed machining using active feedback controller based on microphone,

(RDU170372) UMP (Leader) RM 23 000 .000, 01/05/2017-01/05/2019. Internal grant

11. Effect of lubrication oil tickness on minimum quantity lubrication (MQL) parameter in turning process

(RDU1703158) UMP (Member) RM 23 000 .000, 01/05/2017-01/05/2019. Internal grant

12. Modes and progression of tool deterioration and their effects on cutting force during end milling of 718+

Ni Based superalloy using carbide tools (RDU1703132) UMP (Member) RM 23 5000 .000, 01/05/2017-

01/05/2019. Internal grant

13. Joining of titanium alloy sheet using mechanical clinching (RDU1703214) UMP (Member) RM 25

000.000, 01/05/2017-01/05/2019. Internal grant

14. Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material


15. Analysis and prediction of the cutting forces of Three Dimensional End Milling using Finite Elements

Modelling (RDU1703193) UMP (Member) RM 20 000 .000, 01/05/2017-01/05/2019. Internal grant

16. Study of an optimal surface property of carbide cutting tool by surface modification method


2016

17. Characterization of Thermal Conductivity and Viscosity of Alumina Nanocoolant with Ethylene-

glycerol based Fluid for Quenching Process, (RDU160142) FRGS (Leader) RM 82 400.000, 01/08/2016,

30/07/2019. External grant.

18. Geometric modelling of cutting tool inclination angles for B-spline freeform surfaces in four axis

machining process, (RDU160130) FRGS (member) RM 114 400.000, 01/08/2016, 30/07/2019. External

grant.

19. Integration of fine particles in laser modified tool steel surface stability of grain boundary, (RDU160141)

FRGS (member) RM 112 800.000, 01/08/2016, 30/07/2019. External grant.

20. Characterization of nanocoolant for improving cooling channel design in hot press forming,

(RDU160392), RM32 400, leader 25/06/2016-24/06/2018, in progress. Internal grant

21. Development of a magnetorheological pinched mode valve for automotive semi active suspension ssytem,

(RDU160318), RM24 500, Member, 05/05/2016-04/05/2018, in progress. Internal grant

2015

22. Simulation routines using programming algorithms for the application of CNC machining in rapid

manufacturing (RDU151406), RM56520 Member , 01/12/2015 , 30/11/2017, RAGS Grant

23. Micro-Cutting of Biocompatible Materials used for Medical Applications (RDU150345), RM28 000,

Member , 25/06/2015-24/06/2017, in progress. Internal grant

24. Cutting Orientations in CNC Machining for Rapid Manufacturing Processes (RDU150346), RM26 000,

Member , 25/06/2015 , 24/01/2017, in progress Internal grant

2014

25. Deep drilling technique for increasing cooling channel performance in hot press forming die

(RDU1403121) RM274 000 (Leader) 1/7/2014-30/6/2016 E-Science Grant MOSTI

26. HPF Spanner. 10 000.00 Leader (IUC140301) (2014-2015) Precommercialization UMP

27. Optimization of Punch Shape for Prevention of Wrinkling in Shrink Flanging of High Strength Sheets

(RDU1403119), RM32 500Member , 01/11/2014 , 31/10/2016 , in progress. Internal grant

28. Minimizing Defects in Stamping of Low Formability Sheet using Hot Stamping Process

(RDU140328), RM33 500Member , 15/11/2014 , 14/11/2016 , in progress. Internal grant

2013

29. Development and Characteristics of Waste Cooking Oil as Bio -lubricant and Nano-Lubricant at High

Temperature (RDU130129) FRGS (Member) RM 56 000.00 01/12/2013 , 30/11/2015. External grant.

30. Utilization High Speed Milling Techniques in Die Machining Process by using Speed Miling

Machine (RDU131410), Member, RM 64 000.00, 17/09/2013-16/09/2015 RAGS Grant

31. Enhancement of Stress Resistance in Squeezed Mode MR Fluid through Optimization of

Materials Parameters (RDU131409), Member, RM 54 000.0017/09/2013, 16/09/2015 RAGS Grant

32. Design and optimization of nozzle coolant performance during turning operation of aluminiumalloy

(researcher-Shorterm TATIUC research grant)-RM 17 700.00 (9001-1201)(2013-2015). External

grant.

33. Intelligent milling tools forhigh productivity in machining operation. RM20 000.00, Leader

(IUC130301) (2013-2014) Precommercialization UMP

34. A Low Cost Force Dynamometer for Precision Machining of Automotive Cylinder

Head(RDU1303121) RM30 000 (Leader ) 25/12/2013 , 24/12/2015, Internal grant

35. Development of Hot Press Forming Die for Ultra High Strength Steels in Automotive

Component Application (Leader-UMP Grant)-RM 37 950.00 (RDU 130343) (2013-2015).

36. Enhancing the Electrical Discharge Machining of Metallic Reinforced Ceramic Internal grant

Composites

(RDU1303120) (Member), 12/2013-11/2015 RM 26 960.00, Internal grant

37. Statistical Process Control: Fuzzy Control Chart and Process Capability Indices with Normal Data in

the Supply Chain of Automotive Industry (RDU1303119), Member, 2013-2014 RM 10 000.00

Internal grant

38. Development of Decision Model for Implementing Lean Manufacturing Methods using Topsisand AHP

in Fuzzy Environment (RDU1303118), Member, 2013-2015 RM 19 500.00 Internal grant

39. An Optimized Integration of Solar and Wind Energy Sources using Smart Micro

Grid(RDU130388), Member , 25/11/2013 , 24/12/2015 RM 28 000.00. Internal grant

40. Design and Development of Thermoplastic Lid via Thermoforming Process (RDU130386),

Member, 25/11/2013, 24/11/2015 RM 28 238.000. Internal grant

41. Particle swarm optimization for curve interpolation problem in computer aided design modeling

interface (Researcher-UMP Grant)-RM 13 800.00 (RDU 130336) (2013-2015). Internal grant

42. Laser surface hardening for enhance performance and capacity of rovalma htsc 150 hot press

forming die (Researcher-UMP Grant)-RM 34 000.00 (RDU 130334) (2013-2015). Internal grant

43. A Three Dimensional Blow Molding Techniques for Enhancing Mechanical Properties of Polypropylene

Reinforced with Glass Fibre Composites (Researcher-UMP Grant)-RM 33 600.00 (RDU 130335)

(2013-2015). Internal grant

44. Optimization of Attitude Controller for a Technology Demonstrator (Researcher-UMP Grant)-

RM 33 600.00 (RDU 130338) (2013-2015). Internal grant

2012

45. Process Optimization for Intelligent Manufacturing and Product Development & Innovation

(Leader Project-MTUN-COE under program Sustainable Integrated Direct Recycling of Metal

Waste Management-RM400 000.00)- RM 61 200.00 (RDU121204) (2012-2014) External grant.

46. Potential of integrated chatter avoidance and minimum quantity lubrication condition in

machining process (Leader-FRGS Grant) (RDU 120104) RM 56 000.00 (2012-2014) External grant.

47. Controlling the Emission of Pollution from the Boiler of Palm Oil Mill by Using Neural Network

and Genetic Algorithm Grant sponsored by Yayasan Felda (USM account no:A0567) Amount RM98

000.00 (Researcher)-Completed 2002. External grant.

48. Process damping in milling: An alternative technique for a low speed titanium machining

(Leader-UMP Grant)-RM 34 100.00 (RDU 120317) (2012-2014). Internal grant

49. Experimental Assessment of Cooling Efficiencies in a Non-Isothermal Sheet Metal Forming

Technology (Researcher-UMP Grant)-RM 35 000.00 (RDU 120392) (2012-2014). Internal grant

50. Multi-Objective Genetic Algorithm for Flowshop Scheduling Problem (Researcher-UMP Grant)-RM 16

800.00 (RDU 120385) (2012-2014).. Internal grant

51. Nanoparticles based Coolants in Grinding Processes for Automotive Industry Cooling

Applications (Researcher-UMP Grant) (RDU 12030) RM 34 525.00 (2012-2014). Internal grant

2011.

52. Development of integrated robotic systems for mould polishing in automotive industry

applications -RDU UMP (Leader-UMP Grant) (RDU 110323) through AEC RM35 000.00 (2011-

2013). Internal grant

53. Development of high productivity milling tool for chatter suppression-RDU UMP (Leader-UMP

Grant)(RDU 110305) RM 31 000.00 (2011-2012). Internal grant

54. Development of desktop injection molding machine (Leader-UMP Grant) (RDU 090354)RM 39

100.00 (2009-2011). Internal grant

55. Development of Tool-Life Performance Model for Mold and Die Using Near Dry Machining

Technique (Researcher-UMP Grant) RDU110373 RM36,600.00 (2011-2013). Internal grant

56. Noncontact electromagnetic modal testing actuator for high machining application

(Researcher-UMP Grant), RDU UMP(RDU 110316) RM 23 500.00 (2011-2013). Internal grant

57. Development of Vibration Energy Harvester from Random Forced Excitation (Researcher-UMP

Grant), RDU UMP (RDU 110316) RM 28 404.00 (2011-2013). Internal grant

2004

58. Assembly Line Balancing for Automotive Manufacturing-Short term Grant KUKTEM

(RDU04/1/13) Amount RM36 000.00 (Researcher)-Completed 2004.

PROFESSIONAL QUALIFICATION

Professional Engineer (P.Eng)(18383)

Chartered Engineer (C.Eng) (80294108)

Member of Institute of Mechanical Engineers (MIMechE)

Vice President of Malaysia Society of Structural Health and Monitoring (MSSM)

Graduate Engineer Member of Board of Engineers, Malaysia (BEM) (44101R)

Graduate Engineer Member of Institute of Engineer Malaysia (IEM) (29113G)

Member of International Association Engineers (IAENG) (111896)

Cooperate Member of Society of vibration and acoustic Malaysia (SVAM)

Fellow Automotive Engineering Center (AEC) UMP

Member of Industrial Center of Excellent (I-COE, Automotive Engineering)

TEACHING EXPERIENCE

2019

BFF 3103, Vibrations, 45 student, E-PAT: 85.60

2018



2017

BHM 3103, Vibrations, 10 student, E-PAT: 86.50


KFI1511 Research Methodology, 7 students, E-PAT: 81.50


BFM 3003, Artificial Intelligence Systems, 12 student, E-PAT: 96.94

2016

KFI1511 Research Methodology, 7 students


BHM 3103, Vibrations, 15 student, E-PAT: 78.85

2015

BFF 3103, Vibrations, 59 student, 86.20


BFM 3003, Artificial Intelligence Systems, 40 student ,87.74

2014


BFM 3003, Artificial Intelligence Systems, 64 student, 83.49

2013

BFF 3103, Vibrations, 63 students, 80.63

BFM 3003, Artificial Intelligence Systems, 23 students, 87.72

BFF 3103, Vibrations, 36 students , 84.22

BFM 3003, Artificial Intelligence Systems, 35 students , 90.42

2012

BHM 3103, Vibrations, 16 students , 87.86

BFM 3003, Artificial Intelligence Systems, 34 students, 86.02

BFF 1102, Statics, 64 students, 77.99

BFF 1123, Dynamics, 70 students, 78.23

2011

BMM 1553, Dynamics, 11 students, 80.23

BFM 3003, Artificial Intelligence Systems, 40 students, 87.23 BMM 1553, Dynamics, 60 students, 78.23

2010

DMM 2932, Mechanical Technology Lab, 30 student, 69

2007

BMM 4723, Mechanism Design, 56 students , 77

2006

BMM 4723, Mechanism Design, 57 students, 77

BMM 2523, Fluid Mechanics 2, 181 students, 73

2005

BMM 2613, Computer Aided Mechanical Design, 84 students

BMM 1523, Dynamics, 181 students 2004

BMM 2553, Dynamics, 56 students

DMM 2523, Dynamics, 36 students

BMM 1313, Computer Programming, 55 students

COLLABORATION, EDITORIAL AND REVIEWER CONTRIBUTION

Collaboration

1. Prof Dr Hassan Erdem Camurlu, Antalya University, Turkey, 2019

2. Assoc Prof Dr Ichidate Michimasa, Iwate University, MoU UMP and Iwate University 2016-2021.

3. MoU Asia Mold and Die Consortium (China-Dalian University, Korea-Hanbat Univerisity, Japan-

Iwate University and Malaysia-Universiti Malaysia Pahang, 2013-2018.

4. Dr Sedat Bingol, Dickel University, Turkey, International Staff Attachment in UMP 2015

Editor

1. Editor, International Journal of Advances in Science & Technology, e-ISSN-2231-5152 and

International Journal of Research in Science & Technology, e-ISSN-2249-0604, IRA Publication.

2. Editor, Journal of Artificial Intelligence Research & Advances, ISSN-229-3965, STM Journal.

3. Editor-in -Chief, Journal of Artificial Intelligence, ISSN-229-3965, Bioinfo Publications, May

2012-2017.

4. Editor-in -Chief, World Research Journal of Manufacturing Technology ISSN-229-3965, Bioinfo

Publications, May 2012-2017

Reviewer 2019

1. Jurnal Kejuruteraan, Universiti Kebangsaan Malaysia

2. SN Applied Science (SNAS), Spingernature

3. International journal of Advanced Manufacturing Technology, Springer.

4. IEEE Access

5. Measurement, Sciencedirect.

6. International Journal of Mechanical Sciences, Science Direct.

7. Journal of Cleaner Production, Science Direct. 2018

1. Journal of Cleaner Production, Science Direct

2. Iranian Journal of Science and Technology, Transaction Mechanical Engineering, Springer.

3. Journal of Tribology, Malaysia Tribology Society

4. International journal of advanced manufacturing technology, Springer

5. 6th Asia International Conference on tribology (Asiatrib2018)

6. Part C: Journal of Mechanical Engineering Sciences, IMechE, Sage Publication

7. International Journal of Machining and Machinibity of Materials (IJMM), Inderscience Publication

2017

1. Iranian Journal of Science and Technology, Transaction Mechanical Engineering, Springer.

2. International Conference in Tefchnilogy, Environment and Science (iCITES 2018)

3. Journal of Mechanical Engineering and Sciences (JMES)

4. Jurnal Teknologi, Universiti Teknologi Malaysia.

5. Part C: Journal of Mechanical Engineering Sciences, IMechE, Sage Publication

6. Nonlinear Dynamics, Springer.


8. Advances in Materials Conferences, AMC 2017

2016

1. Advances in Mechanical Engineering, Sage Publication




5. Journal of Mechanical Engineering Sciences, Science Direct 6. Songklanakarin in Journal of Science and technology

7. Advances in Mechanical Engineering, Sage Publication

2015



3. International journal of advanced manufacturing technology.

4. International Colloqium of art and design education research 2015 (i-CADER).

5. International Manufacturing Engineering Conference (IMEC2015).

6. Advancement in petroleum and chemical engineering technology and applications international

conference (APCETA’15).

7. The Enginering technology international conference 2015 (ET 2015)

2014

1. Advances in Mechanical Engineering, Hindawi Publication.

2. International Journal of Mechanical Sciences, Science Direct.


4. International Journal of Mechanical Engineering and Sciences(JMES), Faculty of Mechanical Engineering,

Universiti Malaysia Pahang.

5. World Applied Science Journal.

6. International Graduate Colloquium on Science and Technology 2014 (IPCOST2014)

2013

1. International Manufacturing Engineering Conference (IMEC2013)

2. 2013 IEEE Symposium on Humanities, Science & Engineering Research - Applied Sciences and Technology

Applications.

3. The 3rd International Malaysia-Ireland joint Symposium on Engineering, Science and Business 2013 (IMiEJS

2013).

4. International Conference on Advanced Material Engineering & Technology 2013 (ICAMET 2013)

2012

1. National Conference on Post Graduate Studies (NConPGS 2012), Centre for Graduate Studies,


2. International Conference on Advanced Material Engineering & technology 2012 (ICAMET 2012),

Centre for Advanced Materials and Geopolymer, Universiti Malaysia Perlis.

3. 2012 IEEE Symposium on Business, Engineering and Industrial application (ISBEIA 2012).

4. 2012 IEEE Symposium on industrial electronics and application (ISIEA 2012)

5. The 1st International Conference on Advanced Manufacturing (ICAM 2011)

6. The second International Conference on Software Engineering and Computer System (ICSE 2011)

7. Second national Conference in mechanical engineering & post graduate studies (NMCER 2, 2010)

8. International Journal of Engineering (IJE), Computer Science Journal, CSC Journals, Kuala

Lumpur, Malaysia

CHAIRMAN/SUPERVISION/EXAMINER

Chairman

1. Shathiswara Rao A/L Subramaniam, Master of Science, 2018, Universiti Malaysia Pahang, 22 Nov 2018.

2. Nurul Afina Nazri, Master of Science, 2018, Universiti Malaysia Pahang, 19 Oct 2018

3. Nur Syawanie Manan, Master of Science, 2018, Universiti Malaysia Pahang, 27 Feb 2018.

4. Ali Muhammad Hussein Abbas, Master of Computer Science, 2018 Universiti Malaysia Pahang, 30 March

2018

5. Tasriva Sikandar, Master of Engineering (Electical), 2017 Universiti Malaysia Pahang, 20 October 2017.

6. Low hoon Chit, Master of Engineering (Mechanical), 2017 Universiti Malaysia Pahang, 12 September

2017.

7. Kaaliarasan A/L Ramachandran, Master of Engineering (Mechanical), 2017 Universiti Malaysia Pahang,

04 August 2017.

8. Wahida Amat Fadzil, Master of Engineering (Chemical), 2017 Universiti Malaysia Pahang, 08 February

2017.

9. Khamisah Ab Hamid, Master of Engineering (Mechanical), 2016 Universiti Malaysia Pahang, 10 February

2016.

10. Mohd Fitri Yusop, PhD in Automotive Engineering, 2015, Universiti Malaysia Pahang, 9 Nov 2015

11. Wan Nur Farhanah Wan Zakaria, Master of Engineering (Electronics), 2015 Universiti Malaysia Pahang, 10

August 2015.

Examiner

1. Mohd Najib Muhamed, PhD, Cantuman pateri keras lapisan logam kululi AR500 dan aloi aluminium 7075

sebagi panel perisai, Universiti Kebangsaan Malaysia.

2. Mohd Naqib, MSc, CFD analysis of wear erosion in water jet machining, 2019, Universiti Malaysia

Pahang.

3. Afzal Ahmed Soomro, MSc, Artificial neural network modelling approach for assessment of strafified

thermal energy storage tank, 2019, Universiti Teknologi Petronas.

4. Nur Amira Anang, MSc, Design of cascade NP/PI controller for cutting force compensation of ball screw

driven system, 2018, Universiti Teknikal Melaka Malaysia

5. Ariff Farhan Mohd Nor, MSc, Enhancement of low velocity impact properties of bamboo/glass fibre hybrid

comppsites using carbon nanotubes (CNT) for aerospace applicaions, 2018, Universiti Putra Malaysia

6. M R Haseebuddin, PhD, Influence of nano fillers on tribologyal and mechanical behaviour of carbon fiber

reinforced compistes, 2018, Visvesvaraya Technological University

7. Muhammad Nazmi Bin Nashrudin, MSc, Investidation of non-uniform thickness section and effect to

twist springback, 2018, Universiti Sains Malaysia.

8. Rahil Izzati Mohd Asri, MSc, Thermal oxidation and hydroxypatite coating of SLMed 316L Stainless

Steel Substrate, 2017, Universiti Malaysia Pahang.

9. Chiew Tsung Heng, PhD, Super twisting sliding mode based controllers for precise positioning in machine

tools, 2017, Universiti Teknikal Melaka Malaysia.

10. Hassan Abdulrssoul Abdulhadi, PhD, Thermal wear of tool steel in die casting environment, 2017,


11. Mohamad Fikri Bin Mohd Sharif, MSc, A study on the thermoforming process of stretchable circuit and

its performance in manufacturing of automotive lighting, 2017, Universiti Sains Malaysia.

12. Farah Amira Mohd Ghazali, MEng, Design of a thermoforming process for a smi crystalline polymer,

2017, Universiti Malaysia Pahang.

13. Mohd Fitri Bin Adnan, MSc, Experiemental and statistical study on springback behaviour of AA6061 strip

with non-uniform thickness section, 2016, Universiti Sains Malaysia.

14. Jakeer Hussain Shaik, PhD, Studies on design of spindle-tool system and their effects on overall milling

process stability, 2016, National Institute of Technology Rourkela, India,

15. Nurizan Fakir, MEng (Mechanical Engineering), Prediction of shock absober using grey taguchi

method, 2016, Universiti Malaysia Pahang.

16. Nurul Fateihah Binti Adam, MEng (Mechanical Engineering), Leak detection in gas pipeline based on

time frequency analysis, 2016, Universiti Malaysia Pahang.

17. Nurhidayu Abdullah, MSc Manufacturing Engineering, Preliminary investigation on disassembly

sequence considering the implementation of automated disassembly, 2016, Universiti Teknikal Melaka

Malaysia.

18. Noor Aniza Nordin, MSc Mechanical Engineering, Three dimensional cutting force and tool

deflection in micro end millingf AISI D2, 2016, Universiti Teknologi MARA Malaysia.

19. Suraya Laily, MSc Mechancial Engineering, The study of performance different

electrode materials in electrical discharge machine (EDM) of aluminium alloy LM6,

2015, Universiti Tun Hussein Onn Malaysia.

20. Nuf Iffah Mohamed Azmi, MEng(Manufacturing Engineering) Universiti Malaysia

Pahang, Optimization of PID parameter for hydraulic servo-positioning system utilizing

variable weight grey-Taguchi and particle swarm optimization, 2014, Universiti

Malaysia Pahang.

21. Muhammad Ashikur Rahman Khan, PhD (Mechanical Engineering) Universiti Malaysia

Pahang,An experimental investigation and modeling of the electrical discharge machining

performance on Ti5-2-5 titanium alloy, 2012, Universiti Malaysia Pahang

Supervisor

PhD

1. Wahaizad Safiei (PMF17006) Hybrid nano coolant for cutting at high speed process –Co-Supervisor

(Semester 3).

2. Lim Syh Kai (PMF18002) Recycled nano coolant for cutting process -Main Supervisor (Semester 3).

3. Mohd Fawzi Bin Zamri (PMF18001) Chip Breaker for Automotive Machining Applications-Main

Supervisor (Semester 4).

4. Mohd Faizal Bin Ali Akhbar (PMF16002) Bone drilling for orthopedic application. Main Supervisor

(Semester 6).

5. Norlida Jamil (PMF16001) Effect of thernal on chatter stability in machining process. Main Supervisor

(Semester 7).

6. Salem Salah Abdullah Bagader (PMF15001) Sustainable manufacturing cencept in machining stainless

steels with uncoated carbide tools. Main Supervisor (Graduated Sept 2019).

7. Che ku Eddy Nizwan Che ku Hussain (PMM13001) Health monitoring of composite structure-Co-

Supervisor (Semester 11).

8. Mohd Hazwan Syafiq Harun (PMF14007) Condition monitoring system of deep drilling process for

increasing cooling channel length in hot press forming die. Main Supervisor (Graduated Sept 2018).

9. Noraishah Mohd Nor (PMM13001), New design of tool and die in hot press forming process of ultra high

strength steel for automotive application -Main Supervisor (Semester 10).

10. Zainal Ariffin Selamat (PMF12001), Development of nozzle for machining cooling system in automotive

materials machining - Main Supervisor (Graduated Jan 2019)

11. Mukhtar Malik (PMF08002), The machinablity of high speed milling - Main Supervisor (Graduated Jan

2019)

12. Syeda Najiha Masood (PMM11001), Development of optimum quantity lubrication technique for quenching

the machinability of alloys-Co-Supervisor (Graduated 2017) Master

1. Mohammed Ragab Ahmed (MFM17002) Development of semi active suspension systems - Main Supervisor

(Graduated Sept 2019).

2. Nik Nurul Husna Muhmed Razali (MFM16004) Hybrid energy harvester analysis -Main Supervisor

(Graduated April 2019).

3. Lim Syh Kai (MMF15007) Nano coolant chaterization for hot forming quenching process -Main Supervisor

(Graduated March 2018).

4. Mathan Raj A/L Suparmaniam (MFM14003) Spindle speed modulation for chatter mitigation in

machining process - Main Supervisor (Graduated Sept 2019).

5. Wan Mohd Azlan Wan Mohd Nowalid (MMM13004) Potential of integrated chatter avoidance and

minimum quantity lubrication condition in machining process - Main Supervisor (Graduated Sept 2019).

6. Mohd Fawzi Bin Zamri (MMF13002) Optimum cooling design for hot press forming process-Main

Supervisor (Graduated August 2017).

7. Mohamad Syahmi Bin Shahrom (MMF12001) Sustainable Integrated Direct Recycling of Metal

Cutting Chips-Main Supervisor (Graduated August 2016).

8. Norlida Jamil (MMM12003) NonContact Modal Testing for Machining Application-Main

Supervisor (Graduated August 2015)

9. Hartini Mustafa (MMF10001) Productivity and line balancing of production line in industry -Main

Supervisor (Graduated August 2014).

10. Muhammad Adib Shaharum (MMM11006) Variable helix and variable pitch tool geometry effect

on process damping in milling-Main Supervisor (Graduated Feb 2015).

11. Nor Afiqah (MMM 11002) Integrated energy controller for hybrid energy system-Supervisor (Graduated

March 2017).

12. Mohd Azraei (MMM 11002) MR damper control for identification optimization-Co-Supervisor

(Graduated September 2014)

Master by coursework

1. Kamarulzaman Mahmad Kahirai (KFI16004) CNC Noise Controller -Main Supervisor (Master by Course

Industrial Engineering).

2. Suhaimi Puteh (KFI16004) Lean Manufacturing of choke making -Main Supervisor (Master by Course

Industrial Engineering).

Bachelor 1. Aziha Abdul Aziz (2019) Micro dimple machining by ball nose end mill 2. Suharni Abdul Mulok (2019) Roll and clamping handling characteristic for sheet metal application 3. Muhammad Nazrinmullah Azman (2019), Improving rail levelling tool for thermit welding process 4. Nor Fazlina Pauzi (2019), Standardization of Visual Mechanical Inspection(VMI) Process on

Workstation 5. Muhammad Nashrur Faizzi Abdul Razak (2019), Development of baseplate fastening system in LRT

6. Nur Ameerah (2018), CNC product changeover 7. Mohd Fitri (2018), New product changeover 8. Nur Ameerah (2018), Lean manufacturing for making automotive part 9. Lim Lee Lim (2018) Time frequency domain of cutting process 10. Abdul Hakim (2018) Irregular milling tool chatter stability prediction 11. Saif Addubai (2018) Image processing during cutting process 12. Mohammed Ragab Ahmed (2017) Development of semi active suspension system 13. Tan Yee Siang (2017) Pick and place PLC system for hot press forming process 14. Yong Tick Lee (2017) Experimental of hybrid energy harvesting ystem 15. Roshima Md Puad (2017) Batery Packaging and Tester 16. Muhammad Nazmi Kadir Khan Isnin (2017) Design of Active Spoiler 17. Nurul Shamime Hashim (2017) Ergonomic design of packaging area in electroic company 18. Nur Nazwa Shamimi Salleh (20167) CNC Noise Monitoring 19. Muhammad Aslam (2016) Failure analysis of deep drilling process 20. Nik Nurul Husna (2016) Forming limit diagram of sheet metal with vison systems 21. Amirul Syafiq (2016) Thin walled machining analysis under minimal lubrication conditions 22. Amirul Anshor (2015) Frequency response function of cutting tools under thermal effect 23. Fatin (2016) Finite element analaysis of thick forming for automotive part 24. Muhammad Ammar Mohd Yazid (2016) Finite element analysis of hybrid energy harvester 25. Amirul Hakim (2016) Chatter suppression by spindle speed modulation. 26. Mohamad Nabil Muhamad (2015) Power management circuit of vibration energy harvester systems

for charging application 27. Siti Zulaikha Mansor (2015)A preparation of nanocoolant for hot press forming cooling lubrication 28. Mohd Afiq Mobil Ahmad (2014) Recycled based Milling Tools 29. Syarifah Syahira Syed (2014) Energy harvester based permanent magnet 30. Normahfuzah (2014) Development of HPF Spanner. 31. Nor Suryati (2014) Development of force dynamometer 32. Mohd Syukur Norman (2014) Thin walled machining under MQL conditions 33. Nurul Afiqah (2013) The potential of wind and solar energy for development of hybrid energy 34. Khairunnisa (2013) Programmable logic controller for mini injection molding machine 35. Edzamila Dzaidi (2013) Development of once per revolution sensor for chatter detection 36. Syed Mohd Nor Irsyad Sayed Mohd Nordin (2013) Experimental study of rapid prototyping of

manuafcturing plastic product using response surface methodology. 37. Maizatul Masture Muhammad Nazri (2013) Aluminium chip waste for secondary materials using

direct recycling process 38. Syazwana Mohd Zabidi (2013) Finite element method of electromagnetic energy harverster: simple

beam mass system. 39. Mohd Syahmi Mohd Nong (2013) A new material supply mechanism for plunger type injection

molding. 40. Mohd Saffririzal Bin Abdul Halim (2012) Design and development of MIG Torch Cleaner 41. Mohamad Hafiz Mohamad (2012) A multi-purpose soap dispenser using design for manufacturing

technique. 42. Mohd Raz Firdaus Ramli (2012) Design improvement of consumer product using design for

assembly method. 43. Mohd Al-Rassid Mohd Borhanudin (2012) Development of Materials Supply Mechanism for

Plunger Type Injection Molding. 44. Siti Mahfuzah Mohamad (2012)Improvement of take-away water cup design by using concurrent

engineering (CE) approach. 45. Nurul Fatiehah Adnan (2012) Application of robot for mould polishing. 46. Mohamad Alif Mohd Nasir (2012) Development of flexural structure for chatter machining testing 47. Zulkifli Nawawi (2012) Vibration investigation for passenger car with different damping 48. Mohd Azfadir Mohd Daud (2012) Process damping technique for titanium alloy machining at low

speed machining. 49. Mohd Azwan Zainol Abidin (2012) Experimental validation for chatter stability prediction 50. Zaihin mohd Zahib (2012) Development of bicycle powered water pump 51. Affandy Aziz (2011) Determination of cutting force stiffness using experimental method. 52. Ngu Ya Mei (2006) Cam Assembly Mechanism Analysis. 53. Mohd Yusof (2006) Multi Objective Genetic Algorithms Cam Design 54. Muhd Rufizal (2006) Reverse Engineering of a Cam 55. Mohd Fathi Alias (2006) Adaptive Neuro Fuzzy Interference System for a New Refrigerator

RotaryCompressor (Co-supervisor) .

56. Mohd Faizuddin Sattar (2006) Simulated Annealing Optimization of Automotive Assembly Line Balancing (Co-supervisor)

Diploma 1. Khairul Syahmi Ahmad (2011) Development of round die for press brake machine. 2. Mohd Hafizi Nazih (2005) Motion Platform. 3. Mohd Nasaruddin (2005) Pneumatic Gripper. 4. Abdul Rahim (2006) Fabrication of Transfer Motion 5. Azrul (2006) Fabrication of Cam Testing Rig. 6. Abdul Hakim (2006) Machining of Mould Steel

LIST OF PUBLICATION

Thesis

1. Ahmad Razlan Bin Yusoff (2010). Optimisation of Variable Helix End Milling Tools, PhD

Thesis, Department of Mechanical Engineering, University of Sheffield, Sheffield, UnitedKingdom

2. Ahmad Razlan Bin Yusoff (2003). Predicting Smoke Emission From Palm Oil Mill by Using Artificial

Neural Network, MSc Thesis, School of Mechanical Engineering, Engineering Campus, Universiti

Sains Malaysia, Nibong Tebal, Pulau Pinang

3. Ahmad Razlan Bin Yusoff (2000). Investigation into Response of Buckling on Thin Walled Tubes under

Axial Compression, Final Year Project Thesis, School of Mechanical Engineering, Perak Branch Campus,

Universiti Sains Malaysia, Tronoh, Perak

2019

1. MFA Akhbar, AR Yusoff (2019) Drilling of bone: Thermal osteonecrosis regions induced by drilling

parameters, Biomedical Physics & Engineering Express, Acceptance Manuscript, Q2, ISI Journal.

2. Ismail, N.I.K., Rosli, N., Yusoff, A.R., Amagai, K. (2019) Measurement of liquid film thickness

accumulated on surface machined by minimum quantity lubrication (MQL) Journal of Advanced

Research in Fluid Mechanics and Thermal Sciences. Scopus Journal.

3. SK Lim, MF Zamri, AR Yusoff (2019) Numerical simulation of hot press forming process for

quenchable sheet metal between nanocoolant and chilled water. AIP Conference Proceedings 2151 (1),

020004. Scopus proceedings.

4. SK Lim, NZ Mohamad, AR Yusoff (2019) Experimental Investigation of Recycled Machining Coolant

Mixed with Nanofluids Based Al2O3. IOP Conference Series: Materials Science and Engineering 530

(1), 012002. Scopus proceedings.

5. MR Ahmed, AR Yusoff, FRM Romlay (2019) Numerical Investigation of Continuous Damping of The

Semi-Active Suspension System for Passenger Car. IOP Conference Series: Materials Science and

Engineering 530 (1), 012014. Scopus proceedings.

6. MF Zamri, AR Yusoff (2019) Effect of Rake Angle and Feed Rate on Chip Segmentation in Machining

Carbon Steel 1050 IOP Conference Series: Materials Science and Engineering 530 (1), 012011. Scopus

proceedings.

7. MR Ahmed, AR Yusoff, FRM Romlay (2019) Adjustable Valve Semi-Active Suspension System for

Passenger Car, International Journal of Automotive and Mechanical Engineering 16 (2), 6470-6481.

Scopus Journal

8. MFA Akhbar, AR Yusoff (2019) Comparison of bone temperature elevation in drilling of human, bovine

and porcine bone, Procedia CIRP 77, 397-400, Q4, IF=0.636, Scopus Journal.

9. MFA Akhbar, AR Yusoff (2019) Multi-objective optimization of surgical drill bit to minimize thermal

damage in bone-drilling, Applied Thermal Engineering, 157(2) 113594, Q1, IF=3.771, ISI Journal.

10. Ahmad R. Yusoff and Syh K. Lim, Microstructure and Mechanical Properties of Boron Sheet Metal

Steels in Hot Press Forming Process With Nanofluid as Coolant. In: Saleem Hashmi (editor-in-chief),

Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; 2019. pp. 1-15

11. NA Zainal, AR Yusoff (2019) Integrated Cooling Systems and Maximum Power Point Tracking of

Fuzzy Logic Controller for Improving Photovoltaic Performances, Measurement,131, 100-108, IF=2.359

Q2, ISI journal.

12. Salem Abdullah Bagaber and Ahmad Razlan Yusoff (2019) Energy and Cost Integration for Multi

Objective Optimization in Sustainable Turning Process, 136, 795-810 Measurement, IF=2.359 Q2, ISI

journal.

13. MFA Akhbar, AR Yusoff (2019) Drilling of bone: Effect of drill bit geometries on thermal bone

osteonecrosis risk regions, Journal of Engineering in Medicine, 233(2), 207-218 Q3, IF=1.124, ISI

Journal.

14. NM Yahya, AR Yusoff, A Senawi, MO Tokhi (2019) Dual Level Searching Approach for Solving Multi

Objective Optimisation Problems using Hybrid Particle Swarm Optimisation and Bats Echolocation-

inspired Algorithms, Mekatronika 1 (1), 45-57.

15. MV Suparmaniam, AR Yusoff (2019) Suppression of Chatter in High Speed Milling Machine Using

Spindle Speed Variation Method with Acoustic Feedback PID Controller, Mekatronika 1 (1), 20-25.

2018

16. Salem Abdullah Bagaber and Ahmad Razlan Yusoff (2018) Sustainable Optimization of Dry Turning of

Stainless Steel based on Energy Consumption and Machining Cost, Procedia CIRP 77, 397-400, Q4,

IF=0.636, Scopus Journal.

17. NNHM Razali, AR Yusoff (2018) Optimisation of hybrid energy harvesting using finite element

method based on vibration excitation, Progress in Industrial Ecology, 12(3), 284-296, Q3, IF=0.16,

Scopus Journal.

18. Salem Abdullah Bagaber and Ahmad Razlan Yusoff (2018) Multi-responses optimization in dry turning

of a stainless steel as a key factor in minimum energy, The International Journal of Advanced

Manufacturing Technology, 96(1-4), 1109-1122, IF=2.209 Q2, ISI journal.

19. M F Zamri, AR Yusoff (2018) Heuristic design of U-shaped die cooling channel for producing ultra-high

strength steel using hot press forming, The International Journal of Advanced Manufacturing

Technology, 97(9-12), 4101-4114, IF=2.209 Q2, ISI journal.

20. Z Hamedon, I Razemi, A Azhari, AR Yusoff (2018) In-Situ Measurement of Electrode Wear During

EDM Drilling using Vision System, Journal of Advanced Manufacturing Technology (JAMT) 12 (1 (2)),

513-524.

21. MFA Akhbar, M Malik, AR Yusoff(2018) Effects of drilling parameters in numerical simulation to the

bone temperature elevation, AIP Conference Proceedings 1948 (1), 020002.

22. MFA Akhbar, AR Yusoff (2018) Optimization of drilling parameters for thermal bone necrosis

prevention, Technology and Health Care, 1-15, Q4, IF=0.838, ISI Journal.

23. KM Khairai, NS Salleh, AR Yusoff (2018) Occupational Noise Reduction in CNC Striping Process IOP

Conference Series: Materials Science and Engineering 319 (1), 012034

2017

24. Salem Abdullah Bagaber and Ahmad Razlan Yusoff (2017) A comparative studey on performance of

CBN inserts when turning steel under dry and wet conditions, IOP Conference Series: Materials Science

and Engineering 257 (1), 012041 Scopus journal.

25. YM Syafiq, Z Hamedon, WA Aziz and AR Yusoff (2017) Prevention of crack in strength flanging process

using hot stamping technique IOP Conference Series: Materials Science and Engineering 257 (1), 012071

Scopus journal

26. Mohd Syahmi Shahrom and Ahmad Razlan Yusoff (2017) Cyclic extrusion compression back pressure

technique for direct recycling of aluminium chip, Journal of Manufacturing Processes, 29, 1-9,

IF=2.322, Q2, ISI journal.

27. Salem Abdullah Bagaber and Ahmad Razlan Yusoff (2017) Multi-objective optimization of cutting

parameters to minimize power consumption in dry turning of stainless steel 316

Journal of Cleaner Production, 20, 30–46 IF=5.715, Q1, ISI journal.

28. Mohd Hazwan Syafiq Harun, Mohd Fairusham Ghazali and Ahmad Razlan Yusoff (2017), Analysis of tri-

axial force and vibration sensors for detection of failure criterion in deep twist drilling process,

International Journal of Advanced Manufacturing Technology, 89, 3535-3545, IF=2.209 Q2, ISI journal.

29. Salem A. Bagaber, and Ahmed Razlan Yusoff (2017) Effect of cutting parameters on sustainable

machining performance of coated carbide tool in dry turning process of stainless steel 316, AIP

Conference Proceedings 1828, 020013 http://doi.org/10.1063/1.4979384, Scopus journal.

30. MAFM Yazid, N Jamil, NNHM Razali, AR Yusoff (2017) Finite element analysis of hybrid energy

harvesting of piezoelectric and electromagnetic, MATEC Web of Conferences 90, 01039, Scopus

journal.

2016

31. S K Lim, W H Azmi and A R Yusoff (2016) Investigation of thermal conductivity and viscosity of

Al2O3/water-ethylene gylcol mixturenanocoolant for cooling channel of hot-press forming die application,

International Communications in Heat and Mass Transfer, 78,182-189, IF=3.718 Q1, ISI journal.

32. Ahmad Razlan Yusoff (2016), Identifying bifurcation behavior during machining process for an

irregular milling tool geometry, Measurement, 93, 57-66. IF=2.359 Q1, ISI journal.

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:LdasjJ6CEcoC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:U4n9YNQMCAIC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:U4n9YNQMCAIC

http://aip.scitation.org/doi/abs/10.1063/1.4979384




http://doi.org/10.1063/1.4979384



https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:BzfGm06jWhQC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:BzfGm06jWhQC

33. M S Najiha, M M Rahman and A R Yusoff (2016), Environmental impacts and hazards associated

with metal working fluids and recent advances in the sustainable systems: A review, Renewable

and sustainable energy review, 60, pp. 1006-1031. IF=8.0058, Q1, ISI journal.

34. Norlida Jamil and Ahmad Razlan Yusoff (2016), Electromagnetic actuator for determining frequency

response functions of dynamics modal, Measurement, 82, 355-366. IF=2.359 Q1, ISI journal.

35. Muhammad Adib Shaharum and Ahmad Razlan Yusoff (2016), Effects of irregular tool geometry and

machining process parameters on the wavelength performance of process damping in machining

titanium alloy at low cutting speed, International Journal of Advanced Manufacturing Technology, 85(5) pp.

1019-1033. IF=2.209 Q2, ISI journal.

36. ZA Selamat, NB Baba, M Alias, AR Yusoff, MM Rahman (2016), Effect of Coolant Nozzle Sizes on

Turning Aluminum Alloy AL319, Indian Journal of Science and Technology 9 (9), Scopus journal..

37. Mohd Hazwan Syafiq Harun, Mohd fairusham Ghazali and Ahmad Razlan Yusoff (2016), Tri-axial

Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process, Procedia CIRP

46, 508-511. Scopus journal.

38. Mohd Fawzi Zamri, Lim Syh Kai and Ahmad Razlan Yusoff (2016), Experimental validation for hot

stamping process using taguchi method, IOP Conference Series: Materials Science and Engineering 114

(1), 012033 Scopus journal.

2015

39. M S Najiha, M M Rahman and A R Yusoff (2015), Flank wear characterization in aluminium alloy

(6061 T6) with nanofluid MQL environment using uncoated carbide tools, Journal of manufacturing

science and engineering, 137. IF= 3.480, Q1, ISI journal.

40. Mohd Hazwan Syafiq Harun, Mohd Fairusham Ghazali and Ahmad Razlan Yusoff (2015), Statistical

analysis of deep drilling process consitions using vibartion and force signals, MATEC Web of

Conferences 74, 00002. Scopus journal.

41. Madan Varmma and Ahmad Razlan Yusoff (2015), Investigation of surface roughness and tool wear length

with varying depth of cut adn feed rate of aluminium alloy and P20 steel machining, IOP Conference

Series: Materials Science and Engineering 114 (1), 012141 Scopus journal.

42. Ahmad Razlan Yusoff and Fitriyanti Arsyad(2015), Evaluation of surface roughness and power

consumption in machining cast iron using coated and uncoated irregular milling tools,

IOPConference Series: Materials Science and Engineering 114 (1), 012137 Scopus journal.

43. Nurul Afiqah Zainal, Ajisman Apen and Ahmad Razlan Yusoff (2015), Modelling of Photovoltaic

Module using matlab Simulink, IOP Conference Series: Materials Science and Engineering 114 (1),

012004 Scopus journal.

44. Wan hasbullah Mohd Isa, Khairul Fikri Muhamad, Ismail Mohd Khairuddin, Ismayuzri Ishak and

Ahmad Razlan Yusoff (2015), Geometrical analysis on cap-shaped coils for power optimization of the

vibration based electromagnetic harvesting system, IOP Conference Series: Materials Science and

Engineering 114 (1), 012033 Scopus journal.

45. Suraya Sulaiman, M D Azman, Nanang fatrchurrohman, Abdul Aziz Jaafar and Ahmad RazlanYusoff

(2015), Simulation on the effect of bottle wall thickness distribution using blow mouldingtechnique, IOP

Conference Series: Materials Science and Engineering114 (1), 012033. Scopus journal.

46. M R Azraai, G Priyandoko, Ahmad Razlan Yusoff and M F Rashid (2015) Parametric optimization of

magneto-rheological fluid damper using particle swarm optimization. International Journal of

Automotive and Mechanical Engineering. 11 pp 2590-2599.

47. 22.Mohd Fawzi Zamri and Ahamd Razlan Yusoff (2015), Heuristic optimisation of cooling channel

design in the hot stamping process, Advances in Materials and Processing technologies, pg 1-9. Scopus

journal.

2014

48. Ahmad Razlan Yusoff, Hazami Che Hussain Muhammad Hatifi Mansor and Muhammad Azuan

Zainol Abidin (2014), Analytical Chatter Stability Prediction for Irregular Types of Milling Tools,

Materials Science Forum, vol. 773-774, pp. 428-434, IF=0.399 Q4, ISI journal.

49. Wan Mohd Azlan Nowalid, Muhmamd Adib Shaharom and Ahmad Razlan Yusoff (2014), Effect of

lubrication conditions to the cutting force coefficients in machining process, Advanced Materials

Research Vol. 115pp 55-58, Scopus journal.

50. M.A. Shaharun, A.R.Yusoff, M.S.Reza,(2014), Mechanism of Variable Helix Tools

inSuppressing Chatter using Process Damping for Machining Titanium Alloys at Low Cutting

Speed, Materials Science Forum, vol. 773-774, pp. 370-376 IF=0.399 Q4, ISI journal.

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:zCSUwVk65WsC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:zCSUwVk65WsC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=POhgc5sAAAAJ&sortby=pubdate&citation_for_view=POhgc5sAAAAJ:43bX7VzcjpAC


51. M.S. Shahrom, A.R. Yusoff, M.A. Lajis (2014), Taguchi method approach for recycling chip waste

from machining aluminium (AA6061) using hot press forging process, Advanced Materials

Research vol. 845, pp 637-641 Scopus journal.

52. Norlida Jamil, Ahmad Razlan Yusoff and Muhammad Hatifi Masnor (2014) Experimental study of

the static modal analysis on milling machine tools. Applied Mechanics and Materials. 529 pp 123-

128. Scopus journal.

53. Hazami Che Hussain and Ahmad Razlan Yusoff (2014) Optimization of electro di scharge machining

parameters for drilling titanium in small holes using Taguchi method. Applied

Mechanics and Materials. 529 pp 129-134. Scopus journal.

54. M.S. Shahrom, A.R.Yusoff, M.A.Lajis, (2014), Taguchi method approach for recycling chip waste from

machining aluminium (AA6061) using hot press forging process, Applied Mechanics and

Materials. 845 pp 637-641. Scopus journal.

55. Mohad Azraai Razman, Gigih Priyandoko and Ahmad Razlan Yusoff (2014), Bouc-Wen

model parameter identification for a MR fluid damper using particle swarm

optimization, Applied Mechanics and Materials. 529 pp 279-284. Scopus journal.

56. Zainal Ariffin Selamat, Ahmad Razlan Yusoff and M. M. Rahman (2014), The effect of

various diamters orifice nozzle coolant on surface roughness performance in CNC

turning, Applied Mechanics and Materials. 529 pp 169-174. Scopus journal.

57. Zahari Taha, Ahmad Razlan Yusoff, Mohd Ali Hanafiah Saharudin and Mohd Fawzi

Zamri (2014), Comparison of cooling performance between high thermal conductivity steel

and hot work steel insert for experimental tool using finite element analysis, Applied

Mechanics and Materials. 529 pp 163-168. Scopus journal.

58. Mohamad Syahmi Shahrom and Ahmad Razlan Yusoff (2014), Review on chip aluminium

machining using direct recycling process, Applied Mechanics and Materials. 529 pp 157-162.

59. Mohd Firdaus Hassan, Ahmad Razlan Yusoff, Muhammad Hatifi Mansor and Mohd

Tarmizy Che Kar (2014), Parametric study of an electromagnetic energy harvester, Applied

Mechanics and Materials, vol. 471, pp. 113-118. Scopus journal.

60. Zulkifli Nawawi, Nurazima Ismail and Ahmad Razlan Yusoff (2014), The effect of vibration

and vehicle body movement of car suspension systems due to different damper

characteristics in cornering tests, Applied Mechanics and Materials, vol. 471, pp. 14-19.

2013

61. Siti Mahfuzah Mohamad and Ahmad Razlan Yusoff (2013) Improvement of take away cup

design by using concurrent engineering approach. Procedia Engineering 53 pp.594-599. Scopus

journal.

62. Mohamad Shahmi Shahron, Nafrizuan Mat Yahaya and Ahmad Razlan Yusoff (2013)

Taguchi method on effect of lubrication condition on surface roughness in milling

operation.Procedia Engineering 53 pp.536-541 Scopus journal

2012

63. Hartini Mustafa, Ahmad Razlan Yusoff and Md Yusoff Ismail (2012) Productivity Study and line

balancing of Manufacturing Production line, Advanced Materials Research Vol. 576 (2012) pp

700-704 Scopus journal.

64. Ahmad Razlan Yusoff, Mohd Firdaus Hassan and Muhammad Hatifi Mansor(2012),

Multiobjective optimization of milling tool geometry for chatter suppression

andproductivitymimprovement, Advanced Materials Research Vol.445(2012), pp21-26 Scopus

journal.

65. M.A. Shaharun, A.R.Yusoff , M.S.Reza, K.A.Jalal (2012) Performance of Proces Damping

in Machining Titanium Alloys at Low Cutting Speed with Different Helix Tools. IOP

Conference Series: Materials Science and Engineering 36 012017

66. M.S. Reza, A. R. Yusoff, M.A. Shaharun, T.M. Yusof (2012) Optimization of control parameters

for SR in EDM injection flushing type on stainless steel 304 workpiece . IOP Conference Series:

Materials Science and Engineering 36 012044. Scopus journal.

67. M S Najiha, M M Rahman, M Kamal, A R Yusoff and K. Kadirgama (2012), Minimum quantity

68. lubrication flow analysis in end milling process: A computational fluid dynamics approach,

69. Journal of Mechanical Engineering and Sciences (JMES) e-ISSN: 2231-8380; Volume 3, pp. 340-

345, December 2012. Scopus journal.

70. Norlida Jamil, Ahmad Razlan Yusoff and Mohamad Hatifi Mansor (2012), Literature review of

electromagnetic for dynamic modal testing applications, Journal of Mechanical Engineering and

Sciences (JMES) e-ISSN: 2231-8380; Volume 3, pp. 331-339, December 2012. Scopus journal.

71. Mohamed Reza Zalani Mohamed Suffian, Siti Rabiatul Aisyah and Ahmad Razlan

Yusoff,(2012), Multiple Objective of EDM injection flushing type parameter using grey-Taguchi,

Journal of Mechanical Engineering and Sciences (JMES) e-ISSN: 2231-8380. Scopus journal.

2011

72. Ahmad R Yusoff, Neil D Sims and Sam Turner (2011), Experimental validation of chatter stability

for variable helix end milling tools IOP Conference Series: Materials Science and Engineering 26

012010 Scopus journal.

73. Ahmad R Yusoff and N. D. Sims (2011). Optimisation of variable helix tool geometry

forregenerative chatter mitigation. International Journal of Machine Tools and Manufacture 51(2): 133-

141 IF=3.985 Q1 ISI journal.

74. Ahmad R Yusoff and Neil D Sims (2011), Determination of optimal variable helix and variable pitch tool

geometry for chatter suppression, Journal of Advanced Manufacturing Technology 5(1) Jan-Jun 2011

ISSN-1985-3157.

75. Ahmad Razlan Yusoff, Mohamed Reza Zalani Mohamed Suffian and Mohd Yusof Taib (2011),

Literature review of optimization techniques for chatter suppression in machining, Journal of

Mechanical Engineering and Sciences (JMES) e-ISSN:2231-8380; Volume 1, pp.47-61,

December 2011. Scopus journal.

76. Muhammad Hatifi Mansor, Mohd Firdaus Hassan and Ahmad Razlan Yusoff (2011), Simulation Study on

Cutting Tool System using Intelligent Active Force Control, Journal of Mechanical

Engineering and Sciences (JMES) e-ISSN: 2231-8380; Volume 1, pp. 62-74, December 2011 Scopus

journal.

77. T.M. Yusof, A. R. Yusoff (2011) Experimental data analysis for optimum refrigerant charge of a

mini bar refrigerator UMP Journal of engineering and technology.

2004-2010

78. Ahmad R Yusoff, Sam Turner, Chris M Taylor and Neil D Sims (2010) The role of tool

geometry in process damped milling, International Journal of Advanced Manufacturing

Technology. 50 pp. 883-895 IF=2.209 Q2 ISI journal.

79. A.R.Yusoff and I.A.Azid (2009). Combining Genetic Algorithm and Artificial Neural Network to

Optimize Biomass Steam Power Plant Emission. Journal of Faculty of Mechanical Engineering

(JMechE), Vol. 3 (06) Faculty of Mechanical Engineering, Universiti Teknologi MARA, Selangor.

Scopus journal.

80. A.R.Yusoff and I.A.Azid (2009) Biomass Boiler Emission Analysis using Artificial Neural

Network. Jurnal Teknologi, Vol. 50 pp.15-28 Universiti Teknologi Malaysia, Johor. Scopus journal.

81. Ahmad Razlan Yusoff dan Ahmad Rasdan Ismail (2006). Perbandingan Analisa Kepekaan Rangkaian

Neural Buatan Emisi dari Dua Kilang Kelapa Sawit. Proceeding of Research andDevelopment,

Department of Mechanical & Materials Engineering, UKM pp 163-170, IISBN 983-

2975-55-7.

82. Ahmad Razlan Yusoff, Zakri Ghazalli, Hazami Che Hussain (2009) Determining Optimum

EDM Parameters in Drilling of Small Holes by Taguchi Method, International Journal of

Manufacturing Technology and Management (IJMTM)17(4), Q3, IF=0.186 ISI journal.

83. A.L.Ahmad, I.A.Azid, A.R.Yusoff, K.N.Seetharamu and (2004). Emission Control in Palm

Oil Mills Using Artificial Neural Network and Genetic Algorithm. Computer and

Chemical Engineering, 28(12) pp. 2709-2715 IF=3.024, Q1 ISI journal.

84. Ahmad R Yusoff and Neil D Sims (2009), Optimisation of variable helix end millings tools by

minimising self excited vibration. Journal of Physics: Conference Series 181 012026 SCOPUS

INDEX CN=10 Scopus journal.

85. I.A. Azid, A.R. Yusoff, A.L. Ahmad and K.N. Seetharamu,(2003). Application of Back Propagation

Neural Network in Predicting Palm Oil Mill Emission. ASEAN Journal on Science and

Technology for Development, 20(1), pp. 71-86 Scopus journal.

86. Ahmad Razlan Bin Yusoff and Ishak Abdul Azid (2004). Sensitivity Analysis via Artificial Neural

Network of Biomass Boiler Emission. Jurnal Mekanikal 18 pp. 66-77. Universiti TeknologiMalaysia,

Johor Scopus journal.

International Conference

1. Salem Abdullah Bagaber and Ahmad Razlan Yusoff (2017) Effect of Cutting Parameters on Sustainable

http://jmes.ump.edu.my/files/Volume%201/8%20Mansor%20et%20al.pdf



Machining Performance of Coated Carbide Tool in Dry Turning Process of Stainless Steel 316,

International Symposium on Green & Sustainable Technology (ISGST 2017) UTAR Perak Campus,

Malaysia, Jan 10 – 13, 2017.

2. N Jamil, AR Yusoff(2018) Kurtosis quantification of different minimal quantity lubrication effects in

machining cast iron with coated and uncoated tool, Proceedings of Asia International Conference on

Tribology 2018 2018, 64-65.

3. MAFM Yazid, N Jamil, NNHM Razali, AR Yusoff (2016) Finite element analysis of hybrid energy

harvesting of piezoelectric and electromagnetic, International Conference on Automotive Innovation and

Green Energy Vehicle, (AIGEV2016), Cyberjaya

4. Mohd Hazwan Syafiq Harun, Mohd fairusham Ghazali and Ahmad Razlan Yusoff (2016), Tri-axial

Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process, CIRP High

Performance Cutting 2016, 1-3 Jun 2016, Chemnitz. 5. Wan Mohd Azlan Nowalid and Ahmad Razlan Yusoff (2015), Integrated chatter aviodance and

minimum chatter conditions for chatter vibration problem in the machining process,18th Advances in Material Processing Technology (AMPT 2015), Madrid, Spain, 14-17 Dis 2014.

6. Mohd Hazwan Syafiq Harun, Mohd fairusham Ghazali and Ahmad Razlan Yusoff (2015), Statistical

analysis of deep drilling process consitions using vibartion and force signals, International

conference on mechanical engineering research 2015, 18-19 August 2015, Kuantan.

7. Mohd Fawzi Zamri, Lim Syh Kai and Ahmad Razlan Yusoff (2015), Experimental validation for hot

stamping process using taguchi method,International conference in mechanical engineering research

(IMEC2015), Kuala Lumpur, 18-19 Aug 2015.

8. Madan Varmma and Ahmad Razlan Yusoff (2015), Investigation of surface roughness and tool wear

length with varying depth of cut adn feed rate of aluminium alloy and P20 steel machining,International conference in mechanical engineering research (ICMER2015), Kuala Lumpur, 18-19 Aug 2015.

9. Ahmad Razlan Yusoff and Fitriyanti Arsyad(2015), Evaluation of surface roughness and power

consumption in machining cast iron using coated and uncoated irregular milling tools, International

conference in mechanical engineering research (ICMER2015), Kuala Lumpur, 18-19 Aug 2015. 10. Nurul Afiqah Zainal, Ajisman Apen and Ahmad Razlan Yusoff (2015), Modelling of

PhotovoltaicModule using matlab Simulink, International conference in mechanical engineering

research (ICMER2015), Kuala Lumpur, 18-19 Aug 2015.

11. Wan Hasbullah Mohd Isa, Khairul Fikri Muhamad, Ismail Mohd Khairuddin, Ismayuzri Ishak and Ahmad Razlan Yusoff (2015), Geometrical analysis on cap-shaped coils for power optimization of the

vibration based electromagnetic harvesting system, International conference in mechanical

engineering research (ICMER2015), Kuala Lumpur, 18-19 Aug 2015.

12. Suraya Sulaiman, M D Azman, Nanang Fatrchurrohman, Abdul Aziz Jaafar and Ahmad Razlan Yusoff (2015), Simulation on the effect of bottle wall thickness distribution using blow moulding technique,

International conference in mechanical engineering research (ICMER2015), Kuala Lumpur, 18-19

Aug 2015.

13. Wan Mohd Azlan Nowalid, Muhmamd Adib Shaharom and Ahmad Razlan Yusoff (2014), Effect of lubrication conditions to the cutting force coefficients in machining process, International conference

on advances in manufacturing and materials engineering, 23-25 Sept 2014, Kuala Lumpur.

14. Mohd Fawzi Zamri and Ahamd Razlan Yusoff (2014), Heuristic optimisation of cooling channel

design in the hot stamping process, 17th Advances in Material Processing Technology (AMPT 2014), Madrid, Spain, 17-20Sept 2014, Dubai.

15. Norlida Jamil, Ahamd Razlan Yusoff and Muhammad Hatifi Mansor (2013), Response Prediction

of static modal testing on milling machine tools, 1st International Materials, Industrial and

Manufacturing Engineering Conference 2013, 4-6 Disember, Johor Bahru 16. M.S. Shahrom, A.R.Yusoff, M.A.Lajis, (2013), Taguchi method approach for recycling chip waste

from machining aluminium (AA6061) using hot press forging process, 1st International Materials,

Industrial and Manufacturing Engineering Conference 2013, 4-6 Disember, Johor Bahru.

17. Mohd Azraai Razman, Gigih Priyandoko and Ahmad Razlan Yusoff (2013), Bouc-Wen model parameter identification for a MR fluid damper using particle swarm optimization, International

manufacturing engineering conference (IMEC 2013), 1-3 July 2013, Kuantan, Malaysia.

18. Zainal Ariffin Selamat, Ahmad Razlan Yusoff and M. M. Rahman (2013), The effect of various

diamters orifice nozzle coolant on surface roughness performance in CNC turning, International manufacturing engineering conference (IMEC 2013), 1-3 July 2013, Kuantan, Malaysia.

19. Zahari Taha, Ahmad Razlan Yusoff, Mohd Ali Hanafiah Saharudin and Mohd Fawzi Zamri





(2013), Comparison of cooling performance between high thermal conductivity steel and hot work steel insert for experimental tool using finite element analysis, International manufacturing

engineering conference (IMEC 2013), 1-3 July 2013, Kuantan, Malaysia.

20. Mohamad Syahmi and Ahmad Razlan Yusoff (2013), Review on chip aluminium machining

using direct recycling process, International manufacturing engineering conference (IMEC 2013), 1-3 July 2013, Kuantan, Malaysia.

21. Nurul Fateha, Nafrizuan Mat Yahya and Ahmad Razlan Yusoff (2011), Review on elements of

JIT implementation, Planetary Scientific Research Center Proceeding, 19-20 May 2012 Penang

Malaysia. 22. Mohad Firdaus Hassan, Ahmad Razlan Yusoff, Muhammad Hatifi Mansor and Mohd

Tarmizy Che Kar (2012), Parametric study of an electromagnetic energy harvester, 4th

International

Conference on Noise, Vibration and Comfort (NVC 2012), 26-28 Nov 2012, Kuala

Lumpur,Malaysia. 23. Zulkifli Nawawi, Nurazima Ismail and Ahmad Razlan Yusoff (2012), The effect of vibration and

vehicle body movement of car suspension systems due to different damper characteristics in

cornering tests, 4th

International Conference on Noise, Vibration and Comfort (NVC 2012), 26-28

Nov 2012, Kuala Lumpur, Malaysia. 24. Ahmad Razlan Yusoff, Hazami Che Hussain Muhammad Hatifi Mansor and Muhammad Azuan Zainol

Abidin (2012), Analytical Chatter Stability Prediction for Irregular Types of Milling Tools,

International conference on advances in materials and processing technologies (AMPT 2012), 23-24

Sept 2012, Wollongong, Australia. 25. M.A. Shaharun, A.R.Yusoff, M.S.Reza (2012), Mechanism of Variable Helix Tools in

Suppressing Chatter using Process Damping for Machining Titanium Alloys at Low Cutting

Speed, International conference on advances in materials and processing technologies (AMPT

2012), 23-26 Sept 2012, Wollongong, Australia. 26. Hartini Mustafa, Ahmad Razlan Yusoff and Md Yusoff Ismail (2012) Productivity Study and line

balancing of Manufacturing Production line, International Conference on Advances of

Manufacturing and Materials Processing, (ICMME 2012), Kuala Lumpur

27. Ahmad Razlan Yusoff, Gigih Priyandoko and Muhammad Hatifi Mansor (2012) Nonlinear Effect on Frequency Response Functions of Cutting Tool for Chatter Stability Prediction,

International Conference on Production, Energy and Reliability (ICPER 2012), Kuala Lumpur.

28. M.A. Shaharun, A.R.Yusoff , M.S.Reza, K.A.Jalal (2011) Performance of Process Damping in

Machining Titanium Alloys at Low Cutting Speed with Different Helix Tools. International Conference on Mechanical Engineering Research (ICMER 2011), 4-7 Dis 2011, Kuantan

29. M S Najiha, M M Rahman, M Kamal, A R Yusoff and H A Salaam (2011) The Minimum Quantity

Lubricant Flow Analysis in Milling Operation: A CFD Approach. International Conference on

Mechanical Engineering Research (ICMER 2011), 4-7 Dis 2011, Kuantan 30. M.S. Reza, A. R. Yusoff, M.A. Shaharun, T.M. Yusof (2011) Optimization of control parameters for

SR in EDM injection flushing type on stainless steel 304 workpiece International Conference on

Mechanical Engineering Research (ICMER 2011), 4-7 Dis 2011, Kuantan.

31. T.M. Yusof, A. R. Yusoff, R Mamat (2011) Combination of experimental data and computer prediction of an analysis for optimum refrigerant charge of a mini bar refrigerator International

Malaysian University Technical International Conference (MUiCET 2011), 25-27 Nov 2011, Batu

Pahat.

32. M.S. Reza, A.R. Yusoff, M.A. Shaharun, Nafrizuan Mat Yahaya Optimization of EDM Machining Parameters on AISI 1020 Carbon Steel Workpiece using Grey Relational Analysis”, incoming

Malaysian Technical Universities International Conference on Engineering and Technology

(MUiCET 2011), 25-27 Nov 2011, Batu Bahat.

33. Ahmad Razlan Yusoff, Nafrizuan Mat Yahya and Mohamed Reza Zalani Mohamed Suffian (2011), Improvement of milling tool geometry optimization using a refined differential evolution

algorithms for chatter avoidance, 26th

International Conference on CADCAM, Robotics &

Factories of the Future (CARs&FOF), 26-28 July 2011, Kuala Lumpur, Malaysia.

34. Ahmad Razlan Yusoff, Mohd Firdaus Hassan and Muhammad Hatifi Mansor, Multiobjective optimization of milling tool geometry for chatter suppression and productivity

improvement, International conference on advances in materials and processing technologies

(AMPT 2011), 13-16 July 2011, Istanbul, Turkey.

35. Ahmad Razlan Yusoff and Nafrizuan Mat Yahya (2011), A Refined Differential Evolution for

Improving Optimization Process, International conference on software and computer engineering 2011, 20-21 September 2011, Kuantan, Malaysia.

36. Ahmad R Yusoff and Neil D Sims (2010), Identification of Nonlinear Chatter Instability in

Machining Processes for a Special Milling Tool, International conference of

experimentalmechanics 2010, 29-1 December 2010, Kuala Lumpur 37. Ahmad R Yusoff and Neil D Sims (2010), Determination of optimal variable helix and variable pitch

tool geometry for chatter suppression, International conference on design and concurrent

engineering 2010, 20-21 September 2010, Melaka, Malaysia (The best paper in the conference).

38. Ahmad R Yusoff and Neil D Sims (2010), Period one chatter instability of variable pitch milling tools, Thirteenth Conference on Non Linear Vibrations, Dynamics and Multibody Systems, 23-27 May

2010, Virginia Polytechnic Institute and State University, USA.

39. Ahmad R Yusoff, Neil D Sims and Sam Turner (2009), Experimental validation of chatter

stability for variable helix end milling tools, Trends in Aerospace Manufacturing2009 International Conference, Sheffield.

40. Ahmad R Yusoff and Neil D Sims (2009), Optimisation of variable helix end millings tools by

minimising self excited vibration, 7th

International Conference on Modern Practice in Stress and

Vibration Analysis, Cambridge. 41. A.R. Yusoff, M.Y. Norninawti and M.F.F. Ab. Rashid, 2007, Combination of Multi Objective

Genetic Algorithm and Polynomial Function to Optimize Cam Design, AEESEAP Regional

Symposium 2007, Kuala Lumpur, Malaysia.

42. Ahmad R Yusoff, Neil D Sims and Richard E Clarke (2008), Non-Contact Electromagnetic Actuators for Chatter Stability Analysis of Milling Tools,9

th International Conference on

Vibrations in Rotating Machinery (ICVRM 08), 8-10 September 2008, University of Exeter,

United Kingdom.

43. Ahmad Rasdan Ismail, Baba Md Deros, Rozli Zulkifli, Azimin Samsul Mohd Tazilan and Ahmad Razlan Yusoff, 2006, A Preliminary Study Of Noise Exposure Assessment At A Malaysian

Construction Site, The Proceeding of The International Conference On Environment

(ICENV2006), 13th -15th November 2006, Penang, Malaysia.

44. Ahmad Razlan Yusoff, Zakri Ghazalli, Hazami Che Hussain (2006) Determining Optimum EDM Parameters in Drilling of Small Holes by Taguchi Method, Proceedings of

ICOMAST2006International Conference on Manufacturing Science and Technology 28 to 30

August 2006, Melaka, Malaysia. Paper No:449.

45. Ahmad Razlan Yusoff, Mohd Fazli Ismail and Zakri Ghazalli (2006) Productivity and Line Balancing Improvement of Automotive Assembly Line through Discrete Event Simulation,

Regional Conference in Vehicle Engineering and Technology (RiVET 2006), 3-5 July, 2006, Kuala

Lumpur.

46. Ahmad Razlan Yusoff, Wan Mansor Wan Muhammad, Mohd Fazli Ismail and Zakri Ghazalli (2006) Balancing Automotive Production Line with Simple Assembly Line Balancing Type General,

Proc. Mnaufacturing Engineering.

47. Ahmad Razlan Yusoff and Mohd Zuki (2005) Boundary Layer Flow Due to a Moving Flat

Prediction in Micropolar Fluid based on Artificial Neural Network, Proc. of Conference in Intelligence System and Robotics 2005 (CISAR 2005), International Advanced Technology

Congress (ATCi), 6-8 Dec 2005, IOI Mariot Hotel, Putrajaya .

48. I.A. Azid, A.R. Yusoff, Z.M. Ripin, K.N. Seetharamu and A.L. Ahmad, (2001) Monitoring Palm

Oil Mill Emission by Using Artificial Neural Network, 6th World Congress of Chemical Engineering, Melbourne 23-27 September 2001.

49. I.A. Azid, Z.M. Ripin, M.S. Aris, A.L. Ahmad, K.N. Seetharamu and A. R. Yusoff, (2000).

Predicting Combined-Cycle Natural Gas Power Plant Emission By Using Artificial Neural

Networks. Proc. of IEEE TENCON 2000, part 111, 1145-1151, Kuala Lumpur 24-27 September 2000.

Local conference

50. Mohamad Syahmi Shahrom and Ahmad Razlan Yusoff (2013) Experimental cold compaction of

AA6061 and AA7075 chips from different lubrication conditions. Malaysian University Technical

Conference (MUCET 2013), 20-21 Dis 2013, Kuantan.

51. Siti Mahfuzah Mohamad and Ahmad Razlan Yusoff (2012) Improvement of take away cup design

by using concurrent engineering approach. Malaysian University Technical Conference (MUCET

2012), 20-21 Nov 2012, Kangar.

52. Mohamad Shahmi Shahron, Nafrizuan Mat Yahaya and Ahmad Razlan Yusoff (2012) Taguchi

method on effect of lubrication condition on surface roughness in milling operation.

Malaysian. University Technical Conference (MUCET 2012), 20-21 Nov 2012,

Kangar.

53. Mohd Nizam Mokhtar, Siti Fatihah Adnan and Ahmad Razlan Yusoff (2012) Application of

Taguchi method mold and die polishing process. National Conference on Post Graduate Research

(NConPGR 2012), 8-9 Sept 2012, Kuantan.

54. Norlida Jamil, Muhamad Hatifi Mansor and Ahmad Razlan Yusoff (2012) Analysis of initial

design of electromagnetic actuator using finite element analysis. National Conference on Post

Graduate Research (NConPGR 2012), 8-9 Sept 2012, Kuantan.

55. Ahmad Razlan Yusoff, Mohd Yusof Taib, Mohd Fathi Alias (2006) Adaptive Neuro Fuzzy

Inference System Prediction for a New Refrigerator Rotary Compressor Performance. Proc

Seminar Kebangsaan Sains Kuantitatif 2006 (SKSK06). Langkawi.19-21 Dis, 2012.

56. Ahmad Razlan Yusoff, Mohd Yusof Taib, Mohd Fathi Alias (2006) Adaptive Neuro

FuzzyInference System Prediction for a New Refrigerator Rotary Compressor Performance.

ProcSeminar Kebangsaan Sains Kuantitatif 2006 (SKSK06). Langkawi.19-21 Dis,

2006.

57. Ahmad Razlan Yusoff and Mohd Zuki Salleh (2006). Development of Cam used in

Valvetrainof Internal Combustion Engine using Genetic Algorithm and Polynomial Spline: A

Feasibility Study. National Conference on Design & Concurrent Engineering (DECON 2006) pp.

Malacca, 9-10 August 2006.

58. Ahmad Razlan Yusoff and Rosdi Daud (2006). Reverse Engineering Approach in developing of

a Cam profile for Internal Combustion Engine Proc. Of National Seminar on Science Technology

and Social Sciences (STSS 2006) pp. 535-540, Kuantan, 17-18 May 2006.

59. Ahmad Razlan Yusoff and Mohd Zuki Salleh (2006). Design of Cam Profile used in Valvetrain

of Internal Combustion Engine by using Polynomial and cycloidal Functions Proc. Of National

Seminar on Science and its Applications in Industries 14-15 Feb 2006.

60. A.R.Yusoff and I.A.Azid (2005). Genetic Algorithms and Artificial Neural Networks

Optimization of Particulate Matters from Biomass Boiler Emission. Proc. Of Computational

&Experimental Mechanics (CEM2005), pp.11-16, Bangi, 17-18 May 2005.

61. Ahmad Razlan Yusoff and Ahmad Rasdan Ismail (2005). Perbandingan analisa kepekaan

rangkaian neural buatan emisi dari dua kilang kelapa sawit, Proceeding of resarch and

development, Department of Mechanical & Materials Engineering UKM ISBN 983-2975-55-7

62. A.R.Yusoff and M.R. Mohamed (2005). A Backpropagation Neural Networks Algorithm for

Online Management of PEM Fuel Cells for Residential Application. Proc of National

Advanced Mechanical Engineering (NAME 05) vol.1, pp.183-191, Kuala Lumpur, 17-18 May

2005, 451-456, Kuala Lumpur.

63. A.R. Yusoff, I. A. Azid, A. L. Ahmad and K. N. Seetharamu, (2003). Application of Neural Network

and Genetic Algorithm to Predict and Optimize Particulate Matter from Palm Oil Mill. Proc. of

Environment 2003, pp.423-427, Batu Feringgi, 15-17 Jan 2003.

64. Ahmad Razlan Yusoff, Ishak Abdul Azid and Abdul Latif Ahmad, (2002). Modelling Palm Oil

Mill Emission by Using Neural Network. Mechanical Engineering Research Colloquium2002.

Nibong Tebal 5-6 June 2002.

65. Ishak Abdul Azid, Ahmad Razlan Yusoff, Zaidi Mohd Ripin, Abdul Latiff Ahmad dan We Rout

Ai Wong, (2000). Punca Dan Pencemar Udara Daripada Kilang Kelapa Sawit Satu Kajian Kes :

Kaedah Pengumpulan Data. Simposains 2000, Shah Alam 3-4 Oktober 2000.

66. Ishak Abdul Azid, Ahmad Razlan Yusoff, Zaidi Mohd Ripin dan Abdul Latif Ahmad, (2000).

Pemantauan Dan Kawalan Pelepasan daripada Kilang Kelapa Sawit Menggunakan Rangkaian

Neural. Simposains 2000, Shah Alam 3-4 October, 2000.

67. I.A. Azid, M.S. Aris, A.L. Ahmad, K.N. Seetharamu and A.R. Yusoff, (2000). Monitoring Vehicle

Levels In Public Areas A Case Study Of Ipoh City Bus Terminal. Simposains 2000, Shah Alam 3-4

October 2000.

68. I.A. Azid, A.L. Ahmad , Z.M. Ripin, K.N. Seetharamu and A.R. Yusoff, (2000). Controlling Palm

Oil Mill Emission By Using Artificial Neural Network. Proceeding SomChe 2000. 551-558,

Putrajaya 30-31 October 2000. Article

1. Ahmad R Yusoff (2014), Teknologi DIY Pembacuh Kopi, Utusan Malaysia (Mega Inovasi) Isnin 20 May

2014.

2. Ahmad R Yusoff (2013), Inovasi bantu industri: Penyelidik UMP hasil mata alat milan untuk

pemotongan logam, Utusan Malaysia (Mega Inovasi) Isnin 20 May 2013

3. Ahmad R Yusoff (2013), Robotic application in mould polishing systems for automotive industry,

Auto Inexuss Issue 5: Jan 2013Automotive Engineering Centre Universiti Malaysia.

4. Ahmad R Yusoff (2011), Process damping: Solution for titanium machining, Auto Inexuss Issue

4: July 2011Automotive Engineering Centre Universiti Malaysia Pahang.

5. A.R., Yusoff, Biomass Boiler Emission from Palm Oil Mill Power Plant (2004), April Technical

Note in k-portal, cee.kuktem.edu.my

6. Ahmad Razlan Yusoff Artificial Neural Networks (ANN) and its Application in Engineering(2004) May,

Technical Note in k-portal, mechanical.kuktem.edu.my

7. Ahmad Razlan Yusoff Biomass Boiler Emission Factors of Palm Oil Power Plant (2004) June,

Technical Paper in k-portal, mechanical.kuktem.edu.my

8. Ahmad Razlan Yusoff Yakin dan Percaya (2006) June, Technical Paper ink-

portal,mechanical.kuktem.edu.my

Poster

1. Ahmad RazlanYusoff(2010) Application of variable helix and variable pitch milling tool for chatter

mitigation and process damping. Proceeding of second national Conference in mechanical engineering &

post graduate studies (NMCER 2), 3-4 Dis 2010, Pekan.

2. Ahmad R Yusoff and Neil D Sims (2009), Optimisation of variable helix end millings tools

byminimising self excited vibration, 7th

International Conference on Modern Practice in Stress and

Vibration Analysis. Cambridge.

3. Cik Anuar Mohamed Yunus, RizalmanMamat and Ahmad R Yusoff (2009), Development of

efficient Furnace, Universiti Malaysia Pahang, Post Graduate Open Day Poster Exhibition

MoU/LOI/Academic/Technical Document

1. Memorendum of Agreement (MoA) Between Universiti Malaysia Pahang and B.I. Technology Sdn

Bhd for Industrial Research Grant MTUN-Macthing Grant RM104,000.

2. Letter of Intent (LOI) Between Universiti Malaysia Pahang and TMEH Manufacturing Sdn Bhd for

research collaboration, 2015-2020.

3. Memorendum of Understanding (MoU) Between Universiti Malaysia Pahang and Iwate Universiti,

Japan for exchange knowledge and research, 2016-2021.

4. Quotation for Supply, Delivery, Installation, Testing and Commissioning of Three Channel Charge

Amplifier and Portable Force and Vibration Measurement systems for Fakulti Kejuruteraan

Pembuatan, Universiti Malaysia Pahang (ReferenceNo:UMP/FKP/2014(02) value RM 48 560.00).

5. Accredication document of program bachelor mechatronic engineering (collaboration with HsKA) in

Self Assessment Report, Fakulti Kejuruteraan Pembuatan, Universiti Malaysia Pahang, 2015.

6. Accredication document of program bachelor mechatronic engineering in Self Assessment Report,

Fakulti Kejuruteraan Pembuatan, Universiti Malaysia Pahang, 2014.

7. MQA01 Document for program master of industrial engineering, Fakulti Kejuruteraan pembuatan,

Universiti Malaysia Pahang, 2013.

8. Accredication document of program bachelor mechatronic engineering in Self Assessment Report,

Fakulti Kejuruteraan Pembuatan, Universiti Malaysia Pahang, 2013.

9. Application document for program bachelor marine engineering in Self Assessment Report,

Fakulti Kejuruteraan Mekanikal, Universiti Malaysia Pahang, 2011.

10. Accredication document of program bachelor mechanical engineering in Self Assessment Report,


11. Memorendum of Understanding (MoU) Between Universiti Malaysia Pahang and Universiti

Indonesia for program marine engineering, 2011.

12. Accredication document of program bachelor mechanical engineering in Self Assessment Report,


13. Quotation for Supply, Delivery, Installation, Testing and Commissioning of One set of Cam

Mechanism System for Mechanical Engineering Laboratory, Fakulti Kejuruteraan Mekanikal, Kolej

Universiti Kejuruteraan dan Teknologi Malaysia (ReferenceNo:KUKTEM/BEND.SH/2006(58) value RM

http://mechanical.kuktem.edu.my/page.cfm?name=Tech%20note%2003









90 000.00).

14. Tender for Supply, Delivery, Installation, Testing and Commissioning of One Unit of Gas Turbine

Unit for Mechanical Engineering Laboratory, Fakulti Kejuruteraan Mekanikal, Kolej Universiti

Kejuruteraan and Teknologi Malaysia (Reference No:KUKTEM/BEND.T/2005(13) value RM 350

000.00).

15. Quotation for Supply, Delivery, Installation, Testing and Commissioning of

Thermofluids Equipments for Mechanical Engineering Laboratory, Fakulti Kejuruteraan

Mekanikal, Kolej Universiti Kejuruteraan and Teknologi Malaysia (Reference

No:KUKTEM/BEND.SH/2005(10) value RM 180 000.00).

16. Quotation for Supply, Delivery, Installation, Testing and Commissioning

ofThermodynamicsEquipments for Mechanical Engineering Laboratory, Fakulti Kejuruteraan


No:KUKTEM/BEND.SH/2005(11)value RM 185 000.00).

17. Tender for Supply, Delivery, Installation, Testing and Commissioning of Hydraulics Equipments

for Mechanical Engineering Laboratory, Fakulti Kejuruteraan Mekanikal, Kolej Universiti

Kejuruteraan and Teknologi Malaysia (Reference No:KUKTEM/BEND.T/2004(30) value RM 800

000.00).

18. Kertas Kerja Cadangan Pindaan Kurikulum Ijazah Sarjana Muda Kejuruteraan Mekanikal Dengan

Kejuruteraan Industri/ Teknologi Maklumat/ Kejuruteraan Pembuatan/Biomekanikal/

Kejuruteraan Automotif ke senat universiti KUKTEM 14 Feb 2005.

19. Quotation for Supply, Delivery, Installation, Testing and Commissioning

ofManufacturing Processes Equipments for Mechanical Engineering Laboratory, Fakulti

Kejuruteraan Mekanikal, Kolej Universiti Kejuruteraan and Teknologi Malaysia

(Reference No:KUKTEM/BEND.SH/2004(50) value RM 180 000.00).

20. Quotation for Supply, Delivery, Installation, Testing and Commissioning of Fluids

Mechanics Equipments for Mechanical Engineering Laboratory, Fakulti Kejuruteraan


No:KUKTEM/BEND.SH/2004(6) value RM 180 000.00)

CREATIVE WORK/INTELECTUAL PROPERTY

1. A method for optimising machining process: UI-2018703650, 2018. Ahmad Razlan Yusoff and Salem Salah Abdullah Bagaber.

2. Ahmad Razlan Yusoff and Nurul Afiqah Zainal (2018) Fuzzy logic system with engineering applications, Penerbit UMP, ISBN 978-967-2226-16-1

3. ANanofluid Composition, PI2017400020, Ahmad Razlan Yusoff, LimSyh Kai, Wan Azmi Hamzah 4. Chatter suppression at high sped milling mahine: UI-2016703774, 2016. Ahmad Razlan Yusoff, Madan

Varmma Suparmaniam and Amirul Hakim Kamarazan 5. A deep twist drilling apparatus, Utility Innovation: UI-2016702586, 2016. Ahmad Razlan Yusoff, Mohd

Hazwan Syafiq Harun and Norlida Jamil. 6. Zamzuri Hamedon, Prasadda Rao, Mohd Faiz Turan and Ahmad Razlan Yusoff. Editor for IOP Conference

Series: Materials Science and Engineering (2016) Volume 114 (SCOPUS CITATION). 7. Coffee Maker, Industrial Design: 14-00151-0101, 2014. Ahmad Razlan Yusoff, Mohd Raz Firdaus Ramli and

Muhammad Nafis Osman Zahid, 8. Ahmad Razlan Yusoff and Ismed Iskandar (2014) Chief-in-Editor Manufacturing Engineering,

Advanced Materials Research(2014) Volume 902 (ISI/SCOPUS CITATION)Trans Tech Publication. ISBN-13: 978-3-03835-020-0.

9. Ahmad Razlan Yusoff, Mohd Yusof Taib, Abdul Adam Abdullah and Mahadzir Ishak@Muhamad. Chief-in-Editor for IOP Conference Series: Materials Science and Engineering (2012) Volume 36 (SCOPUS CITATION): International conference in mechanical engineering research (ICMER 2011) 5-7 Dis 2011, Kuantan.

10. Ahmad Razlan Yusoff and Nafrizuan Mat Yahya (2011), A Refined Differential Evolution forImproving Optimization Process, Communications in Computer and Information ScienceVol. 252 CCIS, Issue Part 2 pp 184-194, Springer publication, ISSN:18650929 ISBN:978-364225452-9 DOI: 10.1007/978-3-642-25453-6 17.

11. Chief-in-Editor for Proceeding of International Conference in mechanical engineering research (ICMER 2011) 5-7 Dis 2011, Kuantan. ISBN 978-960-01-2035-5.

12. Editorial Panel for Proceeding of second national Conference in mechanical engineering & post graduiate studies (NMCER 2),vol.1&2, 3-4 Dis 2010, Faculty of Mechanical Engineering Universiti Malaysia Pahang

http://www.scopus.com/source/sourceInfo.url?sourceId=17700155007&origin=recordpage

Publisher. ISBN 978-967-0120-04-1. 13. Panduan Program Softskills (2005) Kolej Universiti Kejuruteraan & Teknologi Malaysia

(KUKTEM)- Panel Penyusun

CONSULTATION JOB

Project with Industry 1. Development of Vibration Analysis Tools: Predictive Maintenance for Rotating Machinery and

Machine-Induced Vibration using Vibration Analysis, SIRIM (1.5 months) RM20,000.00 15 March- 31 April 2019.

2. Standardization of Visual Mechanical Inspection(VMI) Process on Workstation, TT Electronics, Nov 2018 to Jan 2019 (3 months).

3. Improving rail levelling tool for termit welding process, Prasarana Sdn Bhd, Sep 2018- Feb 2019, (6 months).

4. Development of baseplate for railway application, Prasarana Sdn Bhd, Sep 2018- Feb 2019, (6 months).

5. Chip breaker, Sapura Industrial Berhad, Jan 2018 to Jun 2018 (6 months)

6. Lean-Kaizen approach in process improvement drives cleanliness, Vacuumschmelze(M), Nov 2017 to

Jan 2018.

7. Quick changeover on changing new CNC machine, TT Electronics, Nov 2017 to Jan 2018

8. CNC noise reduction, TT Electronics, October 2016 to June 2017 (9 months)

9. Design and test an semiactive absorber, Sapura Indsutrial Berhad, March to July 2016 (5 months)

10. Design, optimize and test a cutting tool of 8 flute 24 diameter for coated and uncoated, Sapura Industrial

Berhad, Jun to Sept 2014 (4 months)

11. Design, optimize and test a cutting tool of 4 flute 16 diameter and 20 diameter, Sapura Industrial Berhad,

April to August 2013 (5 months)

12. Surface rougness measurement, RM700, Jassica Enterprise.

13. Noise enclosure absorber case-RM700, Jassica Enterprise.

14. Shock Absorbers Testing on the road within daily usage- RM 15 000 (UCT110131) Sapura Industrial

Berhad, June to August 2011 (3 months)

15. Development of rapid prototyping hill-slide support for Jabatan Pengairan dan Saliran- RM 3 000.00 Academic 1. Lecturer in Summer camp academic to Sudan Technological University RM2400. 2. Internal Auditor MQA01 Bachelor of Chemical Process Engineering Technology for Faculty of Chemical

Engineering, Universiti Malaysia Pahang. 3. Auditor for ROPE-UMP Kompeten Program Professional PSH UMP for University Advanced Education

(UAE-UMP), 2019 (15 July) 4. Faculty committee member for expert promotion (Associate Professor). 5. Head of Internal Auditor MQA02 Research Mode for PhD(Mathematics),Master of Science (Mathematics)

and Master of Science (Statistics) for Faculty of Industrial Science and Technology, Universiti Malaysia Pahang.

6. Speaker for Final Year Project Supervision, 18 June 2019, Universiti Malaysia Pahang. 7. Head of Internal Auditor MQA02 for Master of Science (Industrial Mathematics) for Faculty of Industrial

Science and Technology, Universiti Malaysia Pahang. 8. Head of Auditor Panel, Engineering Technology Acreditation Council (ETAC) for Program Diploma in

Plant Engineering Technology (Onshore Operation), 29-30 April 2019, Kolej Kemahiran Tinggi MARA (KKTM), Kemaman.

9. Speaker for Research Methodology UMP, 22-23 April 2019. 10. Graduation and Teaching Auditor for Bachelor Executive Mechatronic Technology for University Advanced

Education (UAE-UMP), 28 April 2019. 11. Graduation and Teaching Auditor for Diploma Executive Program (Human Resource Management) for

University Advanced Education (UAE-UMP), 27 April 2019. 12. Auditor for ROPE-UMP Kompeten Program Professional PSH UMP for University Advanced Education

(UAE-UMP), 2018 (21 March) 13. External Assessor for Diploma Automotive Manufacturing program, Politeknik Muazam Shah (TATIUC),

2018. 14. Technical Advisor Panel, Jabatan Tenaga Manusia, Kementerian Sumber Manusia, 24 Sep 2018-2020. 15. Fasilitator for Effective Research Proposal Writing Workshop 2018 in Universiti Malaysia Pahang, 25

September 2018. 16. Speaker for Final Year Project Supervision, 22 May 2018, Universiti Malaysia Pahang. 17. Moderator for Engineering Technology Acreditation Council (ETAC) in Politeknik Sultan Ahmad Shah,

Kuantan, 19 April 2018. 18. Interview panel for mock interview in UMP Boothcamp 2018, 21 April 2018 19. Speaker for Research Methodology UMP, 23-26 April 2018. 20. Panel Judge for Anugerah Akademik Universiti UMP, AAU 2018. 21. Auditor Panel, Malaysia Qualification Agency (MQA) for Diploma Teknologi Pemesinan Industri, Kolej

Vokasional Muar, 2018. 22. Auditor Panel, Malaysia Qualification Agency (MQA) for Diploma Teknologi Pemesinan Industri, Kolej

Vokasional Kemaman, 2018. 23. Auditor Panel, Malaysia Qualification Agency (MQA) for Diploma Teknologi Pemesinan Industri, Kolej

Vokasional Setapak, 2018. 24. Auditor Panel, Malaysia Qualification Agency (MQA) for Diploma Teknologi Pemesinan Industri, Kolej

Vokasional Miri, 2018. 25. Auditor Panel, Engineering Acreditation Council (EAC) for Program Bachelor Engineering Mechanical

Engineering(space), 2-3 May 2018, Universiti Teknologi Malaysia. 26. Internal Auditor, Malaysia Qualification Agency (MQA) for Post Graduate Program in Universiti Malaysia

Pahang, 2018. 27. Auditor Panel, Engineering Technology Acreditation Council (ETAC) for Program Bachelor Engineering

Technology Quality Engineering, 20-22 March 2018, Universiti Kuala Lumpur-Malaysia Institute of Industrial Technology (UNIKL-MITEC).

28. Auditor for UMP-ROPE Kompeten Program Professional PSH UMP for University Advanced Education (UAE-UMP), 2018.

29. Graduation and Teaching Auditor for Bachelor Executive Program (Human Resource Management) for University Advanced Education (UAE-UMP), 15 April 2018.

30. Modul development for Final Project course in Diploma Executive Program of Manufacturing technology, with Ump Advanced Education, 2018 RM1500.

31. Modul development for Vibrations course in Bachelor Executive program of Mechantronic technology, with Ump Advanced Education, 2017 RM1500.

32. Speaker for Final Year Project Supervision, 13 Dis 2017.BLPK Universiti Malaysia Pahang. 33. Graduation Auditor for Bachelor Excetive Program (Human Resource Management) for University

Advanced Education (UAE-UMP), 24 May 2017. 34. External Assessor for Diploma program, Terengganu Advanced Technical University College

(TATIUC), 2017. 35. Auditor Panel, Malaysia Qualification Agency (MQA) for Program Bachelor Mechanical Engineering

Technology (Manufacturing Processing) , MQA/FA 4423, 2017, Universiti Malaysia Perlis. 36. External Assessor for Degree program: Engineering Technology Mechanical (Mechatronic), DRB-HICOM

University of Automotive Malaysia, 2017. 37. External Assessor for Diploma program: Engineering Technology Mechatronic, DRB-HICOM University

of Automotive Malaysia, 2017. 38. Panel for Anugerah Akademik Universiti Universiti Malaysia Pahang (UMP), AAU 2017. 39. Malaysia Qualification Agency (MQA) Auditor for Academic Program in Mechanical/Manufacturing

Engineering Program, 2016. 40. External verifier for diploma program: Manufacturing process and technology, Kolej Kemahiran Tinggi

Mara, Kuantan, 2016. 41. Speaker for Research Methodology Workshop UMP, How to manage yourself and supervisor in doing

research, 20 July 2016. 42. Teaching and learning Auditor of Professional/Executive Program for University Advanced Education

(UAE-UMP), 21 May 2016. 43. Panel for Anugerah Akademik Universiti Universiti Malaysia Pahang (UMP), AAU 2016. 44. Internal Auditor for Bachelor Excetive Program (Manufacturing Management) for University Advanced

Education (UAE-UMP), 13 Jan 2016. 45. Internal Auditor for Diploma Program for MQA Acreditation in Politeknik Sultan Ahmad Shah,

Kuantan, 8-9 Disember 2015. 46. Speker for Seminar persediaan projek sarjana muda ICOE kluster automotif, 20 Sep 2015. 47. External verifier for diploma program Piping technology, Kolej Kemahiran Tinggi Mara, Kemaman 2015. 48. External Panel for Diploma Project in Politeknik Sultan Ahmad Shah, Kuantan, 7 Oct 2015. 49. External verifier for diploma program: Manufacturing process and technology, Kolej Kemahiran

Tinggi Mara, Kuantan 2015. 50. Technical Advisor Panel diploma program for Kolej Kemahiran Tinggi Mara, Kuantan 2014. 51. Final Year Project Panel for Aerospace Engineering Program in Universiti Putra Malaysia, 2014. 52. Judge Panel for 3 minute thesis competition (UMP level) 2014. 53. External verifier for diploma program: Advanced Robotic and Technology, Kolej Kemahiran Tinggi

Mara, Kuantan 2014. 54. External verifier for diploma program: Manufacturing process and technology, Kolej Kemahiran

Tinggi Mara, Kuantan 2014. 55. Technical Advisor Panel for Japan Malaysia Technical Institute (JMTI) 2013-2015, 2016-2018. 56. Technical Advisor Panel for Kolej Kemahiran Tinggi Mara, Dungun 2013. 57. Evaluation Panel - FKP Post Graduate Progress Report 2013. 58. External verifier for Diploma Project in Tool Technology, German Malaysia Institute (GMI) 2013. 59. External verifier for diploma program, Kolej Kemahiran Tinggi Mara, Dungun 2013-2014. . 60. Industrial Advisor Panel, Diploma Mechanical Engineering in Politeknik Sultan Ahmad Shah, Kuantan,

2012-now. 61. Interview Panel (Dean representative) for Professorial post in Universiti Malaysia Pahang. 62. Laboratory demonstrator coordinator for Open University, 1995-1996 RM5000. 63. Laboratory demonstrator for University of Sheffield, 2008-2009 GBP7/hr . 64. Speaker - Briefing on Credit Exemption for FKP-25 September 2012. 65. Speaker - Final Year Project seminar on literature review 2012-21 September 2012.

Research

1. Panel Judge for Pertandingan Rekacipta Inovasi Nasional-Kejuruteraan dan Alam Bina (PRIN-KAB) 2019, Fakulti Kejuruteraan dan Alam Bina, Universiti Kebangsaan Malaysia, 26 August 2019.

2. Keynote Speaker, Chatter vibration in machining process: Determination, prediction and suppression, Joint Conference- International manufacturing engineering conference Asia pacific conference on manufacturing system(IMEC-APCOMS 2019) Universiti Malaysia Pahang-Institut Teknologi Bandung, 21-22 July 2019

3. Panel Judge for International Invention, Innovation and Technology Exhibition 2019 (ITEX 2019) KLCC, 2 - 4 May 2019.

4. External Evaluation Panel, Yayasan Universiti Teknologi Petronas-Fundamental Reseacrh Grant (YUTP-FRG) 2019 for Universiti Teknologi Petronas.

5. External Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2019 for Universiti Malaysia Kelantan.

6. External Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2019 for Terengganu Advanced Technical Universit College (TATIUC).

7. Panel Judge for Innovation and creativity exhibition 2018 (INNOCREX 2018) for Kolej Kemahiran Tinggi MARA, Kuantan 16 April 2018.

8. International Guest Lecture, Application of nanotechnology for productivity improvement, Iwate University, Japan, 29- 30 Oct 2018.

9. Panel Judge for International Festival of Innovation on Green Technology 2018 (I-FINOG 2018) for Universiti Malaysia Pahang, Gambang 21 April 2018.

10. External Evaluation Panel, Propotype Research Grant Scheme (PRGS) 2018 for Universiti Malaysia Kelantan.

11. External Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2018 for Universiti Malaysia Kelantan.

12. Internal Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2018 for Universiti Malaysia Pahang.

13. Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2018 for Technology and Engineering Cluster, Ministry of Higher Education, 9-13 May 2018

14. Panel Judge for International Invention, Innovation and Technology Exhibition 2018 (I-TEX 2018) KLCC, 10 - 12 May 2018.

15. International Guest Lecture, Publication in high impact journal, Universitas Serambi Mekah, Acheh, Indonesia, 7-9 March 2018.

16. Panel Judge for UMP-TVET Exposition 2017, Gambang, 19- 20 September 2017. 17. International Guest Lecture, Current trends in sustainable manufacturing in machining process,

Universitas Batam, Indonesia, 22 July 2017. 18. Panel Judge for International Invention, Innovation and Technology Exhibition 2017 (I-TEX

2017) KLCC, 11 - 13 May 2017. 19. Panel Judge for Advanced Innovation and Engineering Exhibition 2017 (AINEX

2017) Gambang, 3 May 2017. 20. Evaluation Panel for Fundamental Research Grant Scheme (FRGS) 2017 for Technology and Engineering

Cluster, Ministry of Higher Education, 17-31 Mac 2017. 21. Evaluation Panel for Technical Committee for Industrial Central Excellent (ICOE) forAutomotive cluster

Universiti Malaysia Pahang, 2017. 22. Evaluation Panel for Fundamental Research Grant Scheme (FRGS) 2017 for Jabatan Politeknik Malaysia,

20/02-16/03 2017. 23. Evaluation Panel - Creation, Innovation, Technology & Research Exposition 2017 (Citrex 2017)

UMP Gambang pada 14-15 March 2017 24. Panel Judge for International Invention, Innovation and Technology Exhibition 2016 (ITEX

2016) KLCC, 12 - 15 May 2016. 25. Evaluation Panel, Fundamental Research Grant Scheme (FRGS) 2016 for Technology and Engineering

Cluster, Ministry of Higher Education, 9-13 May 2016 26. Invited speaker (Design of cooling channel for u shape hot press forming die), Malaysian University

representative in “AsianJoint Symposium on Die & Mould technology 2016 ”, 13-14Oktober, 2016 at Iwate University, Morioka, Japan.

27. Keynote Speaker, Cutting tool development with Sapura, Research Colloqium: Ump and Sapura, Bandar Baru Bangi, 17 March 2016.

28. International Guest Lecture, Condition monitoring system for deep drilling process in making the cooling cooling in hot press forming die, Iwate University, Japan, 24 Feb 2016.

29. International Guest Lecture, Sustainable manufacturing processes, Universitas Teknologi Yokyakarta, Indonesia, 28 Dis 2015.

30. Invited speaker (Cyclic extrusion compression back pressure technique for direct recycling process of aluminium chip waste), Malaysian University representative in “AsianJoint Symposium on Die & Mould technology 2015 ”, 18-19 September, 2015 di Universiti Malaysia Pahang, Kuantan, Pahang.

31. Evaluation Panel - Creation, Innovation, Technology & Research Exposition 2015 (Citrx 2015) UMP Gambang pada 9 March 2015.

32. Speaker for TATI Education Seminar 2015 (Inspire Innovative Learning throughManufacturing Technology) 10 Mei2015, Terengganu Advanced TechnologyUniversity College, Telok Kalong, Terengganu.

33. Speaker for Kursus Inovasi Pusat Kecemerlangan(I-COE 2015)Kolej Matrikulasi Teknikal Pahang,1-2 Jun 2015, UMP Pekan.

34. Speaker - A day seminar on endnote software-Institute of postgraduate studies, Universiti Malaysia Pahang, Kuantan, Pahang 28 Oct 2015.

35. Speaker - A day seminar on endnote software-Institute of postgraduate studies, Universiti Malaysia Pahang, Kuantan, Pahang 7Apr 2015.

36. Invited speaker (Development of HPF Spanner), Malaysian University representative in “AsianJoint Symposium on Die & Mould technology 2014 ”, 15-17 September, 2014 di Hanbat National University, Daejeon, Korea.

37. Speaker - A day seminar on research toolbox-Institute of postgraduate studies, Universiti Malaysia Pahang, Kuantan, Pahang 18 Feb 2014.

38. Speaker - A day seminar on endnote software-Institute of postgraduate studies, Universiti Malaysia Pahang, Kuantan, Pahang 25 Feb 2014.

39. Evaluation Panel - Creation, Innovation, Technology & Research Exposition 2013 (Citrx 2013) UMP Gambang pada 27 - 28 March 2013.

40. Speaker- Endnote software application in technical writing, Faculty of ManufacturingEngineering, 2012,2013.

41. Speaker for TATI Research Talk 2013(Managing and Participating in Research Exhibition) 11-12 March 2013, Terengganu Advanced Technology University College, Telok Kalong, Terengganu.

42. Invited speaker (Three dimensional Blow Molding), Malaysian University representative in “UURR (University-University and Region-Region) Global Human Program for Asian Manufacturing Industry 2013”, 21-16 March, 2013 di University Iwate, Jepun.

43. Invited speaker (Milling tools for die and mold applications), Malaysian University representative in “Asian Joint Symposium on Die & Mould technology 2013 ” , 24-28 September, 2013 di Dalian University of Technology, China.

44. Speaker - Seminar on research and innovation towards excellence-Jabatan Kejuruteraan Mekanikal, Politeknik Sultan Ahmad Shah, Kuantan, Pahang 19 September 2012.

45. Speaker seminar Route to PhD- Multi Discipline anjuran Pusat Penyelidikan & Pengurusan Sumber Alam (CERRM), Universiti Malaysia Pahang, 22 Jun 2011.

46. Speaker - Seminar on research and innovation towards excellence-Jabatan Kejuruteraan Mekanikal, Politeknik Sultan Ahmad Shah, Kuantan, Pahang 1 Nov 2011

ADMINISTRATIVE CONTRIBUTION

National Level

Committee panel for KPT research grant (FRGS) 2015-now

Malaysia Acreditation Agency (MQA) panel 2016-now

Engineering Acreditation Council (EAC) panel 2018-now

Engineering Technology Acreditation Council (ETAC) panel 2018-now University Level Taskforce for Academic Program IR4.0 UMP 2019 Chairman for IMEC-APCOMS 2019 conference 2018-2019 Committee for Penambahbaikan Buku Peraturan Akademik UMP 2018 Committee for Student Development 2018 Committee for Majlis Bersama Jabatan 2017-2019 Chairman for IMEC-APCOMS 2017 conference 2017 Committee for University Four Track Carrier Path 2018-now Committee for Tri-Semester academic calender 2018-now Committee for Academic Awards 2016-now Committee for Intervention Program Outcome (ILEAD) 2016-now Committee panel for MOSTI research grant 2015-now Committee Majlis Pembelajaran Sepanjang hayat 2015-now

Deputy Dean of Academic and Student Affairs 2014-2019

Deputy Dean of Research & Innovation and Post Graduate 2012-2014

Deputy Dean of Academic and Post Graduate 2011-2012

Head of Diploma Program 2010-2011

Technical Research Asset and Facilities University Committee 2014

Writer for Auto Inexss buletin, Automotive Engineering Center 2014

Guest writer for UMP 2013

Teaching and Learning seminar (TECHSE) Technical Committee 2013

Malaysia Universities Conference (MUCET) Technical Committee 2013

Committee panel for UMP research grant for

(Advance Manufacturing Eng. and Automotive Eng. Cluster) 2013-now

Human Capital Development I-COE for Sapura (suspension system) 2013

Human Capital Development I-COE for Miyazu (Tool Die and Mold) 2013

International Student Intake Committee in UKRA 1 2012

Professional Student Skill Committee in UKRA 3 2012-now

Committeeresearch panel UMP,

Automotive Engineering Cluster 2012-now

Technical Committee,

Committee High Performance Computing 2013-now

Automotive Engineering Centre 2012-2013

Ahli Jawankuasa Tetap Senat (JKTS),

Akademik dan kurikulum 2011-2012 Ahli Jawankuasa Tetap Senat (JKTS),

Penyelidikan dan Pengembangan Ilmu 2012-now Ahli Jawankuasa Tetap Senat (JKTS),

Pengajian Siswazah 2011-now

Faculty Representative 2010-now

Head of Service 2005-2007

UMP Staff football Club Manager 2005

Football Club Coordinator 2004

Manufacturing Focus Group Committee 2003-2007

KUKTEM staff football player 2004-2006

Faculty level

Faculty Coordinator For Research 2019

Faculty Coordinator for Bachelor Technology Industrial Machining 2018

Faculty Coordinator Project II (Master by Course Industrial Engineering) 2017

Faculty Coordinator Project I (Master by Course Industrial Engineering) 2016

Faculty Engineering Journal 2014

Faculty International Conference Technical Committee (Chief-in-editor) 2013

Faculty Professorial Lecture Committee (vice chairman) 2013

Faculty Research and Graduate Committee 2013-now

Faculty Master by Course (Industrial Engineering) Coordinator 2012

Faculty Management Committee 2011-now

Faculty Academic Committee 2012-now

Faculty AEC Committee 2011-now

Faculty Professorial Lecture committee 2012

Faculty Master by course coordinator 2012-now

Faculty Head of Manufacturing design and process Expert Group 2012-now

ICMER 2011 Technical Committee 2011

Coordinator of Marine Engineering Program 2011

Faculty Head of Noise and Vibration Focus Group 2011

Faculty Management Committee 2010-2011

Faculty Technical Committee 2010-2011

Faculty Academic Committee 2010-2011

Faculty Post Graduate and Research Committee 2010-2011 NCMER 2010 Technical Committee 2010

Faculty Technical Committee 2003-2007

Faculty Biomechanics Program Coordinator 2003-2006

Faculty Final Year Project Coordinator 2003-2005

Faculty Knowledge Resource Coordinator 2003-2004

Faculty Academic Committee 2003-2005

Faculty Exam Board Committee 2003-2007

Faculty Thermofluid lab Coordinator 2005-2007

AWARD ACHIEVEMENT

Academic 1. Visiting Professor, Mevlana Academic Staff Exchange Programme to Akdeniz University, Turkey, 2-17

March 2019, 2. Anugerah Khidmat Cemerlang (excellent service) 2017 (APC), Universiti Malaysia Pahang. 3. National Multiplication Training NMT DIES in higher education management in Malaysia, Kuala Lumpur,

10-13 March dan 16-18 Sept 2014, DAAD Sponsored 4. Anugerah Khidmat Cemerlang (excellent service) 2013 (APC), Universiti Malaysia Pahang. 5. SLAI scholarship for PhD degree in Mechanical Engineering at University of Sheffield 2007-

2010. 6. Anugerah Khidmat Cemerlang (excellent service) 2005 (APC), Kolej Universiti Kejuruteraan dan

Teknologi Malaysia (KUKTEM). 7. Anugerah Pensyarah Cemerlang FKM 2004, MechaPro, Kolej Universiti Kejuruteraan dan

Teknologi Malaysia (KUKTEM). 8. JPA scholarship for Bachelor Engineering in Mechanical Engineering, USM 1996-2000 9. USM Special scholarship for Master Degree in Mechanical Engineering 2000-2002 Research

1. Nanofluid for quenching process- Ahmad Razlan Yusoff, Lim Syh Kai and Wan Azmi Malaysia

Trade Exhibition 2019 (MTE 2017) Kuala Lumpur, 16 - 18 Feb 2019-Bronze Medal.

2. Outstanding Researcher in Faculty of Manufacturing Engineering 2018, Universiti Malaysia Pahang,

Staff Appreciation Day, 12 Disember 2018.

3. Supervisory (master by research) in Research Award, Faculty of Manufacturing Engineering 2018,

Universiti Malaysia Pahang, Staff Appreciation Day, 12 Disember 2018

4. Supervisory (PhD) in Research Award, Faculty of Manufacturing Engineering 2018, Universiti

Malaysia Pahang, Staff Appreciation Day, 12 Disember 2018

5. Patent to industry in Research Award, Faculty of Manufacturing Engineering 2018, Universiti Malaysia

Pahang, Staff Appreciation Day, 12 Disember 2018

6. Research Exhibition in Research Award, Faculty of Manufacturing Engineering 2018, Universiti


7. Industry Advisory Expert in Research Award, Faculty of Manufacturing Engineering 2018, Universiti


8. The best paper in the conference (Mohd Ragab Ahmed, Mohd Fadhlur Rahman Mohd Romlay

and Ahmad Razlan Yusoff(2018), Adjustable valve in Semi Active Suspension Systems, Internation

Conference on Automotive Green Energy Vehicle (AIGEV2018) research 2015, 25-26 July 2018,

Kuantan).

9. Sustainable machining performance- Ahmad Razlan Yusoff, Salem Salah and Mohd Fawzi Zamri in

International Invention, Innovation and Technology Exhibition 2018(ITEX 2018) KLCC, 10 - 12 May

2018-Silver Medal.

10. Anugerah Cendekia Bitara (Paper Publication) 2017 by UMP, Multi-objective optimization of

cutting parameters to minimize power consumption in dry turning of stainless steel 316

Journal of Cleaner Production, 20, 30–46 IF=5.715, Q1, ISI journal.

11. Sustainable machining performance- Ahmad Razlan Yusoff, Salem Salah and Mohd Fawzi Zamri in

Creation, Innovation, Technology &Research Exposition 2018 (Citrex 2018) UMP Gambang pada 14 - 15

March 2018-Silver Medal

12. Nanofluid for quenching process- Ahmad Razlan Yusoff, Lim Syh Kai and Wan Azmi in International

Invention, Innovation and Technology Exhibition 2017(ITEX 2017) KLCC, 11 - 13 May 2017-Silver

Medal.

13. Anugerah Cendekia Bitara (Paper Publication) 2016 by UMP, Investigation of thermal conductivity

and viscosity of Al2O3/water-ethylene gylcol mixturenanocoolant for cooling channel of hot-press forming

die application, International Communications in Heat and Mass Transfer, 78,182-189, IF=2.559 Q1 and

Environmental impacts and hazards associated with metal working fluids and recent advances in the

sustainable systems: A review, Renewable and sustainable energy review, 60, pp. 1006-1031. IF=6.7808, Q1.

14. Drilling tool optimization- Ahmad Razlan Yusoff, Mohd Hazwan Syafiq Harun and Nafrizuan Mat

Yahya in Creation, Innovation, Technology &Research Exposition 2017 (Citrex 2017) UMP Gambang

pada 14 - 15 March 2017-Silver Medal

15. Nanofluid for quenching process- Ahmad Razlan Yusoff, Lim Syh Kai and Wan Azmi in Creation,

Innovation, Technology &Research Exposition 2017 (Citrex 2017) UMP Gambang pada 14 - 15 March

2017-Gold Medal.

16. Active Speed Variation for Chatter Suppression -Ahmad Razlan Yusoff and Madan Varmma AL

Suparmaniam Malaysia Trade Exhibition 2017 (MTE 2017) Kuala Lumpur, 16 - 18 Feb 2014-Bronze

Medal.

17. Deep drilling monitoring systems- Ahmad Razlan Yusoff, Mohd Hazwan Syafiq Harun, Norlida Jamil

in Ideas-Inventions-New Products (IENA 2004) di Nuremberg German pada 27 - 30

October 2016-Silver Medal.


in International Invention, Innovation and Technology Exhibition 2016(ITEX 2016) KLCC, 11 -13 May

2016-Gold Medal.


in Creation, Innovation, Technology &Research Exposition 2016 (Citrex 2016) UMP Gambang pada 13-

14 March 2016-Gold Medal.

20. Spindle speed modulation for chatter suppression in maching process- Ahmad Razlan Yusoff,

Madan Raj, Ajisman in Creation, Innovation, Technology &Research Exposition 2016 (Citrex 2016)

UMP Gambang pada 13 - 14 March 2016-Gold Medal.

21. Anugerah Cendekia Bitara (Product Exhibition) 2015 by UMP, Process damping: analternative

method for titanium machining-Ahmad Rosli Abdul Manaf, Ahmad Razlan Yusoff, Muhammad Adib

Shaharun -Gold medal and Special award from Polish Patent Institute in Archemides Salon 2014.

22. The best paper in the conference (Mohd Hazwan Syafiq Harun, Mohd fairusham Ghazali

and Ahmad Razlan Yusoff(2015), Statistical analysis of deep drilling process consitions

using vibartion and force signals, International conference on mechanical engineering

research 2015, 18-19 August 2015, Kuantan).

23. Deep drilling monitoring systems- Ahmad Razlan Yusoff, Mohd fairusham Ghazali and Mohd

Hazwan Syafiq Harun in Advanced Innovation and Engineering Exhibition (AINEX2015),

Kuantan, 18 Aug 2015-Gold Medal.

24. Direct recycling of aluminium chip waste- Ahmad Razlan Yusoff, Shahandzir Baharom, Mohamad

Syahmi Shahrom in Creation, Innovation, Technology &Research Exposition

2013 (Citrex 2013) UMP Gambang pada 9 - 10 March 2015-Bronze Medal.

25. Electromagnetic actuator for dynamics modal testing- Ahmad Razlan Yusoff, Muhammad

Hatifi mansor and Norlida Jamil in Creation, Innovation, Technology &Research

Exposition 2013 (Citrex 2013) UMP Gambang pada 9 - 10 March 2015-Silver Medal.

26. Process damping: an alternative method for titanium machining-Ahmad Rosli Abdul

Manaf, Ahmad Razlan Yusoff, Muhammad Adib Shaharun in Archemides Salon 2014

Moscow, 9 - 11 May 2014-Gold Medal.

27. Process damping: an alternative method for titanium machining-Ahmad Rosli Abdul Manaf,

Ahmad Razlan Yusoff, Muhammad Adib Shaharun in Archemides Salon 2014 Moscow, 9 - 11 May

2014.Silver Medal for titanium processing.


Ahmad Razlan Yusoff, Muhammad Adib Shaharun in Archemides Salon 2014 Moscow, 9 - 11 May

2014-Special award from Polish Patent Institute.

29. HPF Spanner- Ahmad Razlan Yusoff, Mohd Zairulnizam Mohd Zawawi and Mohd Fawzi Zamri in

International Invention, Innovation and Technology Exhibition 2014 (ITEX 2014) KLCC, 9 -11 May 2014-

Silver Medal.

30. DFA coffee maker-Ahmad Razlan Yusoff and Khairul Fikri Muhamad in Malaysia Trade Exhibition

2014 (MTE 2014) Kuala Lumpur, 20 - 22 Feb 2014-Bronze Medal.


Ahmad Razlan Yusoff, Muhammad Adib Shaharun in International Invention, Innovation and

Technology Exhibition 2013 (ITEX 2013) KLCC, 9 - 11 May 2013-Gold Medal.

32. Process damping: an alternative method for titanium machining-Ahmad Rosli AbdulManaf,Ahmad

Razlan Yusoff, Muhammad Adib Shaharun in Creation,Innovation,Technology &Research

Exposition 2013 (Citrex 2013) UMP Gambang pada 27 - 28 March 2013-Gold Medal.

33. Merit Award in Cendekia Bitara 2013, Intelligent Milling Tools for HighProductivity in

Machining Operation.

34. Integrated MIG Tourch Cleaner-Ahmad Razlan Yusoff, Khairul Fikri Muhamad, Mohd Saffrizal

Abdul Halim in Malaysia Trade Exhibition 2013 (MTE 2013) Kuala Lumpur, 21 -23 Feb 2013-Bronze

Medal.

35. I-Tools (Intelligent Milling Tools for High Productivity in Machining Operation)-Ahmad Razlan

Yusoff, Hazami Che Hussain, Muhamad Hatifi Mansor in British Invention Show 2012 (BIS 2012)

London, 17 - 19 Oct 2012-Silver Medal.

36. Intelligent Milling Tools for High Productivity in Machining Operation-Ahmad Razlan Yusoff,

Hazami Che Hussain, Muhamad Hatifi Mansor in International Invention, Innovation and

Technology Exhibition 2012 (ITEX 2012) KLCC, 17 - 19 May 2012-Gold Medal.

37. Anugerah Cendekia Bitara ( Journal Publication) 2011 by UMP, Optimisation of variable helix tool

geometry for regenerative chatter mitigation, Kuantan pada 28 April 2012.

38. Intelligent Milling Tools for High Productivity in Machining Operation-Ahmad Razlan Yusoff,

Hazami Che Hussain, Muhamad Hatifi Mansor in Creation, Innovation, Technology& Research Exposition

2012 (Citrex 2012) UMP Gambang pada 27 - 28 March 2012-Silver Medal.

39. The best paper in the conference (Ahmad R Yusoff and Neil D Sims (2010), Determination

of optimal variable helix and variable pitch tool geometry for chatter

suppression, International conference on design and concurrent engineering 2010, 20-21 September

2010, Melaka, Malaysia).

40. Saintis Cemerlang 2005 (Excellent Scientist) from Malaysian Higher Education Ministry

due to Ideas-Inventions-New Products (IENA 2004) di Nuremberg German pada 28 - 31

October2004-Silver Medal.

41. Monitoring And Controlling Of Palm Oil Emissions By Using Neuro-Tool -Ishak Hj.

Abdul Azid, Abdul Latip Ahmad, Ahmad RazlanYusoff and K.N. Seetharamu International

Trade Fair -Ideas-Inventions-New Products (IENA 2004) di Nuremberg German pada 28 -31 October

2004-Silver Medal.

42. Monitoring And Controlling Of Palm Oil Emissions By Using Neuro-Tool -IshakHj. Abdul

Azid, Abdul Latip Ahmad, Ahmad Razlan Yusoff and K.N. Seetharamu I-TEX 2003,

Sunway Pyramid, Subang Jaya-Silver Medal.

43. Monitoring And Controlling Of Palm Oil Emissions By Using Neuro-Tool -IshakHj. Abdul

Azid,Abdul Latip Ahmad, Ahmad Razlan Yusoff and K.N. Seetharamu MOSTE 2003,

Putra World Trade Centre, Kuala Lumpur-Gold Medal.

44. Yayasan FELDA project grand researcher entitled Monitoring And Controlling Of

Palm Oil Emissions By Using Neuro-Tool for Master of Science in Mechanical

Engineering 2000-2003 amount of RM 98 000.00

Community

1. Charity shield award by Sek Men Hajjah Kalsom (SHARK) for F-1 project for cluster school (2019) for F-1

in schools National Champion to representative Malaysia to Dubai, UAE (2019).

2. Charity shield award by Sek Men Hajjah Kalsom (SHARK) for F-1 project for cluster school (2016)

3. Universiti Malaysia Pahang (UMP) Community Figure Award, Quality and Innovation Day (2016)

4. Charity shield award by Sek Men Hajjah Kalsom (SHARK) for F-1 in schools National Champion to

representative Malaysia to Texas, USA (2016).



COMMUNITY SERVICE

2018-2019 1. Chairman, Pertubuhan Persaudaraan Prihatin (Brothehood Care), 2019-2020 (PPM-017-06-19072019). 2. Deputy Chairman, Jemaah Pengurusan Sistem Pendidikan Al-Irsyad, 2019-2020. 3. Committee, Masjid Fatimah Az-Zahra’, Indera Sempurna Kuantan (MAFAZ), 2019-2020. 4. Advisor for Sek Men Hajjah Kalsom (SHARK) for F-1 project (2018)

2016-2017 5. Tetamu Kehormat, Majlis Graduasi Pelajar Tingkatan 5 kali ke 13 Sek Berasrama Penuh Integrasi Kuantan, 29

Sep 2017. 6. Member of Majlis Bersama Jabatan (UMP-MBJ) 2017-2019 7. Chairman for Ilmuwan UMP (NGO), 2017-2018. 8. Vice President for Persatuan Akademik UMP (PAKAD), 2017-2018. 9. Deputy Secretary for Masjid Fatimah Az-Zahra’, Indera Sempurna Kuantan (MAFAZ), 2017-2019. 10. Ahli Jemaah Pengurusan Sistem Pendidikan Al-Irsyad, Biro Teknikal Sek Al-Irsyad, 2017-2018. 11. President for Pahang state NGO: Persatuan Pembimbing Masyarakat Sejahtera (PPMS) 2015-2016 12. Committee for Persatuan Akademik UMP (PAKAD), 2015-2016. 13. Vice President, Malaysia Society of Structure Health Monitoring, 2015-2016. 14. Advisor for Sek Men Hajjah Kalsom (SHARK) for F-1 project (2015,2016) 2014-2015 15. President for Pahang state NGO: Persatuan Pembimbing Masyarakat Sejahtera (PPMS) 2015-2016. 16. AJK Surau Fatimah Az-Zahra’, Taman Indera Sempurna, 25150 Kuantan, Pahang (Hari Kebesaran

Islam),2015-2016. 17. Committee for Persatuan Akademik UMP (PAKAD), 2015-2016. 18. Vice President, Malaysia Society of Structure Health Monitoring, 2015-2016. 19. Ahli Jemaah Pengurusan Sistem Pendidikan Al-Irsyad, Biro Teknikal Sek Al-Irsyad, 2014-2016. 20. Advisor for Sek Men Hajjah Kalsom (SHARK) for F-1 project (2015-2016) 2012-2013 21. President for Pahang state NGO: Persatuan Pembimbing Masyarakat Sejahtera (PPMS) 2013-2014. 22. AJK Surau Fatimah Az-Zahra’, Taman Indera Sempurna, 25150 Kuantan, Pahang (Penerbitan

dan Informasi).2012-2013. 23. Committee for Persatuan Akademik UMP (PAKAD) 2013-2014. 24. Ahli Jemaah Pengurusan Sistem Pendidikan Al-Irsyad, Biro Akademik Sek Men Al-Irsyad, 2012-

2013. 25. Advisor for Sek Men Hajjah Kalsom (SHARK) for F-1 project (2013-2014) 2005-2011 26. Panel Temuduga Jabatan Perkhidmatan Awam bagi Pelajar Lepasan SPM 2011 27. Bendahari Persatuan Pelajar Malaysia Sheffield (PMPMS)-2007-08

TRAINING/WORKSHOP/CONFERENCE

2019

1. CIRP Conference Machining Modelling Operation 2019, 13-14 June 2019, Sheffield, United Kingdom

2. Bengkel Penambahbaikan dan pemurnian kurikulum sarjana muda teknologi, Kuala Lumpur, 19-20 Jan 2019.

3. 2019 International Research Workshop, Batu Pahat, UTHM, 17-20 Feb 2019.

4. Malaysia Trade Exhibition (MTE 2019), Kuala Lumpur, 20-22 Feb 2019.

5. Mevlana Academic Staf Mobility Program, Akdeniz University, Antalya, Turkey, 3-16 March 2019.

6. Bengkel Competency base interview technique, UMP, Kuantan, 16 April 2019.

7. Bengkel TOT siri IV-Kaedah Maklumbalas Penilaian Dokumen SRR-01 Program Teknologi, Kuala Lumpur, 27 May

2019.

2018

1. Bengkel Transformasi Rekabentuk Semula Keperluan dan Model Kompetensi Staff Akademik UMP, Kuantan,

19-21 Jan 2018.

2. International Conference on Nanoscience & Nanotechnology 2018, Shah Alam, 26-29 Feb 2018.

3. Bengkel Maklum Balas MQA Program Pasca Siswazah, Pekan, 28 Feb – 1 March 2018.

4. ETAC Panel Training, Board of Engineers Malaysia, 7-9 Feb 2018, Kelana Jaya.

5. Bengkel Persediaan Laporan Awal, Diploma Teknologi Pemesinan Industri, Kolej Vokasional, 15-16 April

2018, Putrajaya.

6. Lawatan Kerja Ke Universitas Serambi Mekah, 7-9 March 2018, Acheh, Indonesia

7. 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest 25-27 June 2018.

8. 6th

Asia International Conference on Tribology 2018, Kuching, 17-20 Oct 2018.

9. Training of Trainer (TOT): Latihan Pembangunan Kurikulum Bersepadu Berdasarkan Work Based Learning (WBL),

15-18 Nov 2018, Bangi.

10. International Conference on Recent Advances in Industrial Engineering and Manufacturing 2018, Penang,

112-13 Disember 2018.

2017

1. APCOM-IMEC 2017, Jogyakarta, Indonesia, 5-9 Dis 2017

2. Town Hall: Multitrack Career pathway, Gambang

3. Bengkel Perencanaan Agenda Memasyarakatkan teknologi: Dimensi Akademik bersempena Amanat NC 2017

4. Bengkel Penyediaan Dokumen Hala Tuju MTUN (Kluster Akademik 2016-2025

5. Bengkel Pemuktamadkan Rubrik dan Simulasi Laluan Kerjaya Pelbagai Pensyarah

6. Workshop Guides towards Achieving Registration as Porfessional Engineer

7. Bengkel Cascading KPI Pelan Strategik UMP 2016-2020

8. UMP TVET Exposition 2017

9. Bengkel Penambahbaikan Peraturan Akademik Program Diploma dan Sarjana Muda Sepenuh Masa 2017

10. Team Building Workshop, 11-13 Ogos 2017, Pulau Toiman, Pahang.

11. Kolukium Citra Sarjana, PAKAD, 7-9 Ogos, 2017, Gambamg, Pahang

12. Lawatan Kerja Ke Nanyang Technology Institute, 09-10 Ogos 2017, Singapore

13. Bengkel Semakan Kurikulum FKP, 4-6 August 2017, Kijal, Terengganu

14. Lawatan Kerja Ke Universitas Batam, 21-23 Jul 2017, Batam, Indonesia.

15. Bengkel BPA, 1-2 June 2017, Kuantan, Pahang

16. International Invention, Innovation and Technology Exhibition 2016(ITEX 2016) KLCC, 11 - 13 May 2017

17. Bengkel Penilaian Permohonan Skim Geran Penyeldikan Fundamental (FRGS) KPT, 27-31 March 2017.

18. Creation, Innovation, Technology & Research Exposition 2017 (Citrex 2017) UMP Gambang pada 14-15 March

2017.

19. Malaysia Trade Exhibition (MTE2017), 16-18 Feb 2017, Kuala Lumpur.

20. 2nd International Symposium on Green and Sustainable Technology 2017, 10-13 Jan 2017

2016

1 Bengkel semakan semula anugerah akademik universiti, 12/01/2016 - 12/01/2016, Pekan, Pahang

2 Lawatan Kerja Ke Universiti Iwate, 21-26 Februari 2016, Morioka, Jepun.

3 Kolokium: New Academia Innovations, 12 Feb 2016, Gambang, Pakad.

4 Majlis Amanat Tahunan Naib Canselor 2016, 17 Feb 2016, Gambang.

5 Bengkel Brainstorming Pelajar Antarabangsa , 26 Jan 2016, Gambang.

6 Bengkel AKEPT Amalan Penilaian Geran Penyelidikan FRGS/PRGS, 20-21 Apr 2016, Nilai, KPT.

7 Bengkel Semakan E-Science Fund, 12 Apr 2016, Pekan, AEC, UMP.

8 Hari Kualiti dan Inovasi 2016, 06 Mei 2016, Gambang.

9 International Invention, Innovation and Technology Exhibition 2016 (ITEX 2016) KLCC, 12-14 May2016.

10 Road to graduation carnival, 18 Mei 2016, Pekan, Pahang,

11 7th CIRP Conference on High Performance Cutting, Chemnitz, German, 1-3 June 2016.

12 2nd International Conference on Automotive Innovation and Green Technology, 2-3 August 2016,

Cyberjaya.

13 Diskusi Redesign Learning,Re-thinking Teaching-Global Online Learning, 08 August 2016, Pekan, Pahang

14 Bengkel penambahbaikan anugerah akademik universiti (AAU), 10 August 2016, Pekan, Pahang

15 Kongres Academik Kebangsaan, 19-20Sept 2016, AKEPT, Nilai, Pakad.

16 AsianJoint Symposium on Die & Mould technology 2016, 13-14 Oktober, 2016at Iwate University, Morioka,

Japan.

17 Lawatan Kerja Ke HsKA, 01-03 Nov 2016, Kalshure, German.

18 Ideas-Inventions-New Products (IENA 2016) di Nuremberg German pada 27 - 30

October 2016.

19 Majlis syarahan umum Ketua Setiusaha Kementerian Pengajian Tinggi (KPT) – Enpowering growth through

innovation and creativity, 28 Nov 2016, Gambang

2015 1. Lawatan Kerja Ke Universiti Indonesia, 21-26Dis 2016, Jogyakarta, Indonesia.

2. Bengkel Latihan Juruaudit Program pressional UMP, 18 Nov 2015, Gambang, UAE

3. Asian Joint Symposium on mold and die 2015, 18-19Aug 2015, Kuantan, Malaysia, UniversitiMalaysia

Pahang, UMP.

4. 18th Advances in Material Processing Technology (AMPT 2015), Madrid, Spain, 14-17Dis 2015,UMP.

5. Bengkel penulisan dan penilaian kertas kerja, Kuantan, 27 jan 2015, UMP

6. Majlis Amanat Tahunan Naib Canselor 2015, 25 Feb 2015, Gambang.

7. Sambutan Maulidurrasul 1436H UMP, Gambang, 21 Jan 2015.

8. Bengkel pemurnian dokumen MQA01 progam dwi ijazah sarjana kejuruteraan automotif, Kuantan,28 Mar

2015, GACC.

9. Bengkel Charted Engineer, 3 Apr 2015, Kuantan, UMP.

10. Career talk with Silterra Malaysia, 8 Apr 2015, Pekan, UMP.

11. Forum pekerja sihat, persekitaran selamat dan produktviti meningkat, 10 Jun 2015, Pekan, UMP.

12. Majlis perasmian kempen gaya hidup sihat, 10 Jun 2015, Pekan, UMP.

13. Commercialisation and IP valuation workshop, 25 Aug 2015, Kuantan, UMP.

14. Majlis perhimpunan bersama naib canselor (wacana: hari ini dan masa hadapan), 14 Aug 2015,Gambang,

UMP.

15. Program penambahbaikan governan akademik: penasihatan akademik, 26 Oct 2015, Gambang,UMP.

16. Program peningkatan kompetensi dan fungsional pentadbir akademik: pemahaman pelaksanaanperaturan dan

panduan akademik program akademik prasiswazah, 20 Oct 2015, Gambang, UMP.

17. International manufacturing engineering conference IMEC 2015, 12-13 Nov 2015, Kuala Lumpur,UMP.

18. International conference in mechanical engineering research (ICMER2015), Kuantan, 18-19 Aug2015, UMP.

19. Advanced innovation engineering exhibition (AINEX2015), Kuantan, 18 Aug 2015,UMP.

20. Introduction to Ansys Mechanical, 5-7 Jan 2015, Kelana jaya, UMP 2014

1. Asian Joint Symposium on mold and die 2014, 14-16 Sep 2013, Daejon, Korea, Hanbat National

University, UMP

2. Bengkel Semakan Kurikulum FKP, 22-24 Sept 2014, Kuala Terengganu, UMP, UMP

3. National Multiplication Training NMT DIES, Kuala Lumpur, 10-13 March dan 16-18 Sept 2014,

DAAD Sponsored.

4. Bengkel perancangan strategik pengajian siswazah UMP 2014-2015, Kuantan, 7-9 Feb 2014, IPS,

UMP.

5. Bengkel route to PE, Gambang, BLPK, 11 April 2014, UMP.

6. Understanding the structure and chemistry of engineering materials at the nanoscale using state of the

art analytical technique, Pekan, 16 May 2014, UMP.

7. Student skills development camp (SSDC) FKP, 26 Jun 2013, UMP.

8. Workshop of technical journal writting, Pekan, 20-21 Jun 2014, UMP.

9. Techning and learning in Higher Education Seminar (Techse), 8-11 Dis 2013, Gambang, UMP.

10. 17th Advances in Material Processing Technology (AMPT 2014), Dubai, UAE, 17-20 Sept

2014,UMP.

11. Malaysia Trade Exhibition (MTE2014), 20-22 Sept 2014, Kuala Lumpur, UMP.

12. International Invention, Innovation and Technology Exhibition 2014 (ITEX 2014) KLCC, 9 – 10

May 2014.

13. Archimedes 2014, Moscow, Russia,1-4 Apr 2014, UMP.

14. Perancangan Strategik FKP 2014, 28-30 Jan 2014, Kuantan.

15. Short Course on Tribology in mold and die, 13-15 Oct 2014, UMP, UMP 2013

1. 16th Advances in Material Processing Technology (AMPT 2013), Taipie, Taiwan, 22-26 Sept 2013,Taipe

University, UMP.

2. 1st International materials, industrial and manufacturing conference, 4-6 Dis 2013,Johor Bahru,UTM, UMP.

3. Asian Joint Symposium on mold and die 2013, 24-28 Sep 2013, Dalian, China, Dalian Universityof

Technology, UMP.

4. Techning and learning in Higher Education Seminar (Techse), 8-11 Dis 2013, Gambang, UMP.

5. Bengkel High Perfornance Computing (HPC), 13 June 2013, Gambang, UMP, UMP.

6. International Manufacturing Engineering Conference (IMEC2013), 1-3 July 2013, Gambang, UMP.

7. Bengkel pemurnian FRGS adn ERGS 2013, 3-4 Nov 2013, Kuantan, AEC, UMP.

8. Bengkel Strategik Planning AEC, 10-12 May 2013, Dungun, AEC, UMP.

9. Bengkel penulisan proposal dan pembangunan jurutera profesional, 15-16 Jan 2013, Kuantan, UMP.

10. Bengkel review paper dan penulisan artikel, 13-14 Apr 2013, Kuantan, FKP, UMP.

11. Bengkel Semakan E-Science fund, 13-14 Apr 2013, Kuantan, AEC, UMP.

12. Bengkel EAC program mechatronic engineering, 17-18 Oct 2013, Kuantan, UMP.

13. Bengkel Pengurusan harta Intelek, 19-21 Oct 2013, Genting Highland, UMP, UMP.

14. Persidangan transformasi pengajian tinggi Malaysia, 25-26 August 2013, Kuala Lumpur, MACC,UMP.

15. Bengkel pemantauan geran MTUN COE, 15 Feb dan 16 Jul 2013, Bandar Baru Bangi dan Kangar,MTUN,

UMP.

16. Bengkel Semakan Kurikulum FKP, 25-28 July 2013, Cherating, UMP, UMP.

17. Seminar on research product commercialisation, 11-12 Jun 2013, Kuala Lumpur, MTUN, UMP.

18. CEO Roundtable discussion, 15 March 2013, Hotel Seri Pasific, UMP, UMP.

19. Persidanagn Kebangsaan anggota badan berkanun, 6-7 March 2013, Shah Alam, GAKUM, UMP.

20. UURR Global Human Program for Asian manufacturing Industry 2013, 21-26 March, 2013,Morioka, Jepun,

Iwate University, UMP.

2012

1. Bengkel Semakan Perancangan Strategik, 2 May 2012, FKP, UMP.

2. Seminar Student Centred Learning (SCL) 9 May 2012, FKP, UMP.

3. The World Innovation Forum 2012, 5-7 Nov 2012, KLCC, MOSTI, AKEPT.

4. 15th Advances in Material Processing Technology (AMPT 2012), Wollonggong, Australia, University of

Wollonggong, UMP.

5. 4th International conference on noise and vibration and comfort (NVC2012) 26-28 July 2012,

Melia Hotel, KL, UKM.

6. International conference on advances in manufacturing & material engineering (ICAMME 2012),

3-5 July 2012, Kuala Lumpur, IIUM, UMP.

7. Majlis Amanat Tahunan Naib Cahselor 2012, 16 Feb 2012, UMP,

8. Wacana pengurusan strategik - perkongsian amalan terbaik, 3 April 2012, UMP Gambang, UMP,

9. Modern Language restructuring Workshop (PBMSK), 10 July 2012, UMP,

10. Majlis Syarahan Umum Professor, 10 July 2012, FKP.

11. UMP business forum 1.0 “ Academia + CEOS = narrowing gaps” in conjunction the lunching MBA

program, 10 Dis 2012, Kuatan, FTEK, FKP.

12. Mesyuarat Industrial Advisor Panel (I.A.P) Bagi Program Fakulti Kejuruteraan Pembuatan, 12 Sep

2012, Kuala Lumpur, FKP, UMP.

13. Mesyuarat Lembaga Pengajian (B.O.S.) Bagi Program kerjasama dengan German, 9 Mar 2012, Kuala

Lumpur, GACC, UMP.

14. Promosi Jom Masuk U, 9-12 March 2012, Kuching, Sarawak, KPT, UMP.

15. Promosi Jom Masuk U, 22-23 Feb 2012, Kota Kinabalu, Sabah, KPT, UMP

16. E-learning, course outcome course assessment and course quality improvement workshop, 9 Feb

2012, MS Garden, AEC, UMP.

17. Bengkel perancangan strategik dan penetapan KPI pusat kejuruteraan automotif, 2-4 feb 2012,

Bukit Tinggi, AEC, UMP.

18. Multi Disciplinary Workshop (CQI), 5 Jan 2012, UMP gambang, CERMM, UMP 2011

1. Bengkel Training of Trainer Mento-Mentee 2011, 31-2 Feb 2011, de Rhu Resort, JHEPA, UMP.

2. Automotive FRGS workshop, 1 march 2011, Grand Continetal Hotel, AEC, UMP

3. Mesyuarat Pembangunan Program baharu (Kejuruteraan Marin) bersama Lembaga Pengajian, 9March 2011,

MS Garden Hotel, Kuantan.

4. FKM FRGS workshop, 15 march 2011, Bukit Gambang Resort, FKM, UMP.

5. A short course of time frequency analysis, 4-5 Apr 2011, Melia Hotel, KL, Tekbac, UMP.

6. Seminar Pengurusan Akademik IPT, 1-3 July 2011, Langkawi, USM, UMP

7. Lawatan Kerja Institute Teknologi Bandung, Indonesia, 14-17 Jun 2011, Bandung, Indonesia,FKM, UMP

8. Kursus Penyeliaan Pelajar Siswazah, 26-28 July 2011, Kijal, Terengganu, SPS, UMP

9. Bengkel kaedah pengajaran dan pembelajaran Program Kejuruteraan bersama Northern IllinoisUniversity

(NIU), 8-12 Aug and 5-19 Aug 2011, UMP, Northern Illinois University (NIU), UMP.

10. A visit to special tool manufacture, 21 Sep 2011, TMEH Manufacturing, UMP.

11. Meeting program outcome for program manufacturing engineering, 9 Nov 2011, Hotel Vistana,FKP, UMP.

12. Lawatan ke SIRIM dan Universiti Malaya, 25 Nov 2011, Shah Alam dan Kuala Lumpur, FKM,UMP.

13. Bengkel pemamtapan organisasi FKP, 25-27 Nov 2011, Dusun Eco, Bentong, FKP, UMP.

14. Bengkel Penyediaan SAR program kejuruteraan pembuatan, 3-5 Dis 2011, MS Garden Hotel, FKP,UMP.

15. UIAM benchmarking kejuruteraan Pembuatan, 13 Dis 2011, UIAM Gombak, FKP, UMP.

16. Bengkel Penyediaan SAR program kejuruteraan pembuatan, 21-23 Dis 2011, Colmar Hotel, FKP,UMP

17. USM benchmarking kejuruteraan Pembuatan, 27 Dis 2011, USM Nibong tebal, FKP, UMP 2006

1. Bengkel laporan dan dokumentasi EAC, 7-8 Oct 2006, Kijal, FKM, UMP

2. Bengkel Outcome Based Education (OBE), 7-8 Sept 2006, Kijal, FKM, UMP

3. Bengkel Pemurnian Kurikulum, Silibus, Perancangan Pengajaran dan OBE, June 2006, Balok, FKM, UMP

2005

1. Computational, Experimental Mechanics Seminar (CEMS 2005), May 2005, Bandar Baru

Bangi,Universiti Kebangsaan Malaysia, KUKTEM.

2. National Advances Mechanical Engineering Conference (NAME 2005), May 2005, Kuala Lumpur,

Universiti Teknologi MARA, KUKTEM.

3. Kecemerlangan diri dan organisasi. July 2005, KUKTEM, Human Resourse, KUKTEM.

4. Kursus Kenaikan Pangkat PTK 3, September 2005, KUKTEM, Human Resourse, KUKTEM

5. Research Methodology, March 2005, de Palma Hotel , Shah Alam, ILQAM, UiTM, KUKTEM

6. Research Methodology, May 2005, KUKTEM, ORGS, KUKTEM.

7. Kursus Blooms Taxonomy, May 2005, Legend Hotel, FKM, KUKTEM.

8. Bengkel Analisis Peperiksaan, Dis 2005, Makmal CNC, FKM, KUKTEM .

9. International Advanced Technology Congress (ATCi), 6-8 Dec 2005, IOI Mariot Hotel, Putrajaya

10. Basic and Advanced Hydraulic Training, August 2005, KUKTEM, Festo, Shamawar

11. Basic and Advanced Electro Hydraulic Training, Sept 2005, KUKTEM, Festo, Shamawar

12. Witness Software Training, Oct 2015, KUKTEM, ASR Synergy, Global Electromagnet

13. Force Dynometer, Sept 2005, KUKTEM, Dewetron, Cahaya Ledang

14. Sodick Wirecut EDM CNC, Oct 2005, KUKTEM, Sodick, PRT

15. Bomb Calorimeter, Dec 2005, KUKTEM, Hisco, Hisco.

16. Air Conditioning Unit, Marcet Boiler and Heat Conduction, Dec 2005, KUKTEM, Soltex, Soplus

2004

1. Leadership, Teamwork and communication, March 2004, Dungun, Quality Unit, KUKTEM

2. Induction course, may 2004, Rompin, Human Resourse, KUKTEM

3. Fluid Properties, Centrifugal Force and Governer, April 2004, KUKTEM, Kosijaya

4. Presure Loss, Bernoulli Theorem and Tabular heat Exchanger, May 2004, KUKTEM,

CahayaLedang.

5. Gyroscope, Balancing, Rolling Disck adn Inertia Rotation, May 2004, KUKTEM, Cahaya Ledang.

6. Application of Artificial Intelligence with Matlab, Dis 2004, Kuala Lumpur, Tekbec, Singapore,

KUKTEM

ACADEMIC REFEREE

1. Prof Dr Ir Wan Azhar Wan Yusoff

Vice Chancellor, Vice Chancellor Office/Professor,

Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia

Email:[email protected],[email protected]

609-4245022.

2. Prof Dr Dr Ishak Abdul Azid

Professor/Head of Section

International, Industrial & Institutional Partnership Research adn

Innovation Sections

mailto:[email protected]

Universiti Kuala Lumpur,

Malaysia Spanish Institite (UniKL MSI)

Kulim Hi-Tech Park, 09000, Kulim, Kedah, Malaysia

Email:[email protected]

3. Prof Dr Deil D Sims

Professor/Head of Department

Department of Mechanical Engineering,

University of Sheffeild, S1 3JD Sheffeild, United Kindom

Email:[email protected] +44-0114 222 7724

ir dr ahmad razlan yusoff c.eng, mimeche, p.eng professor · students, 10 master students and more...

Documents