investing in carmaker for driver-in-the- loop simulation · investing in carmaker for...
TRANSCRIPT
-
Investing in CarMaker
for Driver-In-The-
Loop simulation
IPG Apply & Innovate
September 2014
Chris Hoyle & Richard Hurdwell (RHE)
-
About rFpro
Driving simulators
TerrainServer
Digital Circuit Models
-
Driving simulator software
-
Digital Circuit Models
-
TerrainServer real-time road surfaces
-
TURNOVER & APPLICATION GROWTH OF rFpro T
urn
ov
er
UK M
illio
ns
3.5
2008COMMISSIONED
BY TOP F1 TEAM
2010TRACK AND HIGHWAY
LIDAR SCANNING
SERVICE LAUNCHED
90%MOTORSPORT
10%AUTOMOTIVE
2009rFpro BUSINESS
APPLICATIONS
2011TERRAINSERVER
LAUNCHED
2014COMPREHENSIVE DIGITALCIRCUIT
MODEL LIBRARY OF OVER 50
TRACKS NOW AVAILABLE
2014rFpro NOW USED IN
OVER 25 SIMULATOR
INSTALLATIONS WORLDWIDE
INCLUDING OEMS AND
TIER 1S IN THE USA,
JAPAN AND EUROPE
80%AUTOMOTIVE
20%MOTOSPORT
2014rFpro BUSINESS
APPLICATIONS
LiDAR scanning image courtesy 3D Mapping, GmbH
-
rFpro CUSTOMERS
AVL ESTIMATES OVER 30 PERCENT COST SAVINGS DEVELOPING
DRIVING ATTRIBUTES THROUGH
FRONTLOADING THE ENGINEERING
ACTIVITY ON A SIMULATOR
OEMs
T1s
Engineering services
Simulator facilities
THE TRIAL OF RFPRO WAS SO
PROMISING THAT WE IMMEDIATELY PUT
IT TO USE IN PRODUCTION-INTENT
APPLICATIONS,
Head of Simulation, Ferrari
-
The engineering behind rFpro
The advantage of working in F1 for Vehicle Dynamics simulation studies with a human-in-the-loop
-
The engineering behind rFpro
Laptime (sector )
3D Stereo video vs mono
Video Bandwidth
60 vs 120 Hz Video
Video Latency (110-24ms)
Optically corrected
-
The engineering behind rFpro
Measuring both absolute gain and variance
-
The engineering behind rFpro
Importance of Video latency fastest signal to driver
-
The engineering behind rFpro
Measuring Importance of Video bandwidth
-
The engineering behind rFpro
Laptime (sector )
3D Stereo video vs mono
Video Bandwidth
60 vs 120 Hz Video
Video Latency (110-24ms)
Optically corrected
-
Leverage your investment in CarMaker
Model based Development Hardware integration early in lifecycle
Re-introduce the Human test driver into the Model Based Development Process
Test Vehicle Dynamics & ADAS with a human driver Before real hardware exists
Ensure ADAS works despite human driver
Reducing costs, shortening development cycles, improving quality and increasing the performance of a wide variety of automotive solutions
-
Calibrating CarMaker
- Driver-in-the-loop
Richard Hurdwell -
Concept chassis parameters with representative masses and
powertrain
-
Initial calibration - with IPG Driver
Steering Pad
-
CarMaker model Driver-In-TheLoop on THE rFpro
VEHICLE DYNAMICS PROVING GROUND
A FICTITIOUS
BUT ENTIRELY
REPRESENTATIVE
VDPG WITH ALL THE
FEATURES OF A
REAL FACILITY
CarMaker model links directly to rFpro
Driver inputs via G27 / SensoWheel
Torque feedback CM -> rFpro -> Handwheel
Results:
No perceptible phase delay between input, graphics or feedback
Vehicle difficult to control in enthusiastic manoeuvres
-
Drivability Improvements - Driver-in-the-loop at Proving Ground
Needed to Develop - Yaw Damping - Drivability in higher speed manoeuvres
By refining - Elasto kinematics - Roll damping - Steering ratio & PAS - Limited Slip Differential
-
Result:
- Much improved Drivability
Handling Track
-
Investing in CarMaker
for Driver-In-The-
Loop simulation
Thank you Any
Questions?
Chris Hoyle & Richard Hurdwell (RHE)