installatie
DESCRIPTION
TRANSCRIPT
Installation solar collector
Step by step
First look for the best position of the solar collector on the roof-as close as possible to the boiler for less piping where heat loss is possible-placed on the south side of the roof-best angle: 45°
Remove roof tiles and drill a hole in the isolation of the roof
Use a grinder to modify the roof tiles so the aluminum strip can pass
Bend the aluminum strip so the frame can be mounted on the roof
Connect the vertical aluminum bars with bolts
Mount the horizontal bars, the manifold and the tail stock with bolds
Screw the inox pipe to the manifold
Tube isolation of HT Armaflex through roof tile with air vent
Take off the cap and push the vacuum tube through the tail stock
Put heat conduction past on the copper end -for maximum heat exchange-to prevent leaks
Put the evacuated tubes in the manifold