inspection is the ﬁrst step of safety. kito chain sling

medicine

KITO CHAIN SLING 100

Strictly Avoid OverloadingKito Chain Sling 100 products have Kito Sling Tags attached. Be sure to use the product within the range of the working load limits displayed on the Kito Sling Tag. (Refer to page 3.)

Changes in the Working Load Limit according to the Angle of Loading

The working load limits will change according to the angle of loading. Be certain to confirm the actual angle of loading with the angle of loading and working load limits described on the Kito Safety Tag.

Minimizing the Impact Loading Impact loading will lead to unexpected overloading. Take particular care to avoid shock when the loads are lifted off and returned to the ground.

Measures when Loads have Sharp Edges For loads that have sharper edges, an increasingly unreasonable force will be applied to the chain slings, affecting their strength. Apply pads to protect the load and chains, and use chains considering the safety factor margin.

Chain Twisting and TanglingVerify that the chain is not twisted, tangled, or tangled with the sling components prior to use.

When the Load is Out of BalanceSuspend loads in such a way that the loading is applied equally to all the chain slings. In cases where the form of the load makes it difficult to suspend with equal loading on each chain, select the slings while considering the chain side that bears the heaviest load as the reference.

Apply Loads to the Center of the HookBe certain to suspend the load from the center of the hook (deepest part). Avoid suspending loads from the hook tip.

Variations in Working Load Limits under High Temperatures

In the situation of using chain slings in high temperature environments, or in cases where chain slings are used under normal temperatures after they have been used in high temperature environments, the working load limits should be reduced according to the corresponding temperature in the table below.

Resistance to ChemicalsThese products cannot be used in environments that are subject to chemicals.

Leaving Loads in a Suspended Condition

Do not leave loads in a suspended condition for long periods.

Reductions in the Working Load Limits

To allow safe use of chain slings, when using under the following conditions the working load limits should be reduced to 80% or less of the values given in the working load limit list.(1) Work that is carried out with high frequency or when the working load is applied continuously(2) Work in which vibration is applied continuously(3) Usage by incorporation in an automatic line

Chain Sling Usage Limits Observe the usage limitations due to wear and elongation, and do not use products that have become deformed or cracked.

BULLETIN NO. CSGE1508-04

1

Supporting ideal lifting work with outstanding quality

Printed in japan 29.03(SE.H)CSGE04-006

Distributed by:

•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •In case you intend to use our products for special purposes, consult us in advance.•In case you intend to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.

KITO CORPORATIONSHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com

1 8

9

10

11

12

2

3

4

5

6

7

Precautions for Use Recommendationsfor Correct Equipment

Administration

Inspection is the first step of safety.

In order to use the equipment

safety, carry out the daily

inspections, monthly inspections

and periodic inspections.

Daily and Periodic InspectionsDaily inspections should be implemented by the operator before using the chain slings for work. In addition, periodic inspections should be implemented by the persons determined by the business entity.

Chain Sling StorageStore chain slings in appropriate locations under favorable environments where they will not rust.

Chain Sling Record AdministrationThe administration of inspection records is important for the safe use of chain slings.

Kito has prepared a “Periodic Inspection Standards Manual” which describes the inspection standards and periodic inspection check sheets.

•This catalog is intended to allow the use of Kito Chain Sling 100 products at working load limits with a safety factor of 5:1.

•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another

1

2

3

Working load limit (%)Temperature, t (°C)

-40 < t ≤ 100100 < t ≤ 260200 < t ≤ 300300 < t ≤ 350350 < t ≤ 400

Over 400

10090756560

Usage not allowed

2

600

500

400

300

200

100

5Chaindiameter (mm)

BreakingForce

(kN)

10 15 20

Grade 10

Grade 8

Grade 6


EN, ISO

ASME, ASTM, NACM, JIS

•Kito Sling Tag •Contents

Index

Every Kito Chain Sling 100 product has a Kito Sling Tag attached.The Kito Sling Tag is an important item for carrying out safe work,so be sure to confirm that the tag is attached to the product before starting work.

For Single Leg Sling

For Double/ Triple/ Quardruple Leg Sling

Front Back

The following important information is described on the Kito Sling Tag.

Method of Lifting and

Working Load Limits

Manufacture Date

ChainDiameter

ManagementNumber

(Optional)

Kito Link Chain Grade 10 Achieves the World’s Strongest Level•This is the world’s strongest link chain with a breaking

stress of 1000 N/mm2 or more which was developed

based on Kito’s many years of accumulated technology

and experience.

•Using a carefully manufactured special alloy steel as

the material, the chain links are formed and welded by

completely automated machines, before undergoing

quenching and tempering using special automatic heat

treatment equipment.

•Tension test is implemented on all lots to ensure that

all products maintain the breaking stress of 1000

N/mm2 or more.

•These chain manufacturing technologies, unrivaled

anywhere in the world, create the high level of link chain

strength.

Wide Range of Variations allow Selection of the Optimum Combination for Any Application•Standard link chains are provided in various diameters

from Ø6.0 mm to Ø20.0 mm to support work lifting

heavy and large-sized objects. The link chain and fitting

combinations offer clevis-type products with exclusive

retaining pins, and eye-type products which use

Hicouplings.

•Since a wide range of fittings are also available, it is

possible to freely select from among single leg, double

leg, triple leg, quadruple leg, and endless types to

match the usage purpose.

High Product Quality realizes Safe and Highly Efficient Work•All Kito Chain Sling 100 products have a safety factor

of 5:1.

•Due to the inspections carried out in each

manufacturing process, link chains with high

dimensional accuracy are being manufactured.

•Fittings are forged from specially selected alloy steel

that undergoes quenching and tempering to realize high

strength and outstanding wear resistance.

•All products have a Kito Safety Tag attached. These

tags enable promotion of even safer work.

•Link chains offer great freedom of usage, so that

simple, speedy, and secure lifting work can be realized

by combining them with appropriate fittings.

Advanced Chain Manufacturing Technologies realize Outstanding Ultimate Elongation•Kito link chains have both a high breaking stress and

toughness due to the advanced chain manufacturing

technologies that are utilized. The factor that verifies

this is the numerical value known as the ultimate

elongation which achieves a value of 20% or more. In

addition, concerning the strength in the link bending

direction, the use of advanced welding technology gives

the links sufficient absorbability as shown by the

photograph (at bottom right) of the result of bending

test according to ISO 1834, and no

breakage or cracking occurs.

(However, this does not indicate that

the product should be used until it

reaches the condition shown in the

photograph.)

Achievement of Outstanding Economic Efficiency due to the High Wear Resistance•Regarding wear due to the chain linking, Kito’s unique

heat treatment technology exhibits its true worth so that

the wear factor of the link chains has become extremely

small. This enables the link chains to also sufficiently

withstand long-period use, realizing excellent economic

efficiency.

Kito Sling Tag

Linking the load to the crane, Kito Chain Sling 100 products prove their worth in the locations closest to the operator

Since its establishment in 1932, Kito has aimed

to create products that are safe and easy to operate.

Kito gives its primary consideration to safety

•Product Features

•Kito Sling Tag

•Link Chain Specification Table

•Selection Procedure

•Method of Lifting and Working Load Limits

Fittings Components

•Selection Table of kit of Pin for clevis hook

Fittings Components Clevis Type

Fittings Components Eye Type

Standard Sling Types

•Kito Standard Sling Types [Way to Read The Code]

Standard Sling Types Clevis Type SCP2

Standard Sling Types Eye Type SCE2

Standard Sling Types Eye Type SCE2 (HMS)

•Constituent Components Reference Example

•Large Master Link HL/HLD

•Example

•Reference Examples of Special Specification Systems

•Introduction to High Versatility Balance Beams

2

3

4

4

5

6

7

8

10

12

13

14

16

18

19

20

24

25

26

•Kito will also design and manufacture chain slings and accessories other than the standard products in response to user requests. Please feel free to contact your Kito dealer for more information.

Be certain to use the sling within the range of the working load limits that are indicated on the tag. The working load limits and angles of loading are inscribed based on the “Method of Lifting and working Load Limits” on page 5.

Because a space is prepared on the tag so that customers can write an optional administration number, please use this for your product safety administration.

CHAIN SLINGWARNING

・ALWAYS read owner’s manual.・NEVER lift more than WLL.

3

600

500

400

300

200

100

5Chaindiameter (mm)

BreakingForce

(kN)

10 15 20

Grade 10

Grade 8

Grade 6


EN, ISO

ASME, ASTM, NACM, JIS

•Kito Sling Tag •Contents

Index

Every Kito Chain Sling 100 product has a Kito Sling Tag attached.The Kito Sling Tag is an important item for carrying out safe work,so be sure to confirm that the tag is attached to the product before starting work.

For Single Leg Sling

For Double/ Triple/ Quardruple Leg Sling

Front Back

The following important information is described on the Kito Sling Tag.

Method of Lifting and

Working Load Limits

Manufacture Date

ChainDiameter

ManagementNumber

(Optional)

Kito Link Chain Grade 10 Achieves the World’s Strongest Level•This is the world’s strongest link chain with a breaking

stress of 1000 N/mm2 or more which was developed

based on Kito’s many years of accumulated technology

and experience.

•Using a carefully manufactured special alloy steel as

the material, the chain links are formed and welded by

completely automated machines, before undergoing

quenching and tempering using special automatic heat

treatment equipment.

•Tension test is implemented on all lots to ensure that

all products maintain the breaking stress of 1000

N/mm2 or more.

•These chain manufacturing technologies, unrivaled

anywhere in the world, create the high level of link chain

strength.

Wide Range of Variations allow Selection of the Optimum Combination for Any Application•Standard link chains are provided in various diameters

from Ø6.0 mm to Ø20.0 mm to support work lifting

heavy and large-sized objects. The link chain and fitting

combinations offer clevis-type products with exclusive

retaining pins, and eye-type products which use

Hicouplings.

•Since a wide range of fittings are also available, it is

possible to freely select from among single leg, double

leg, triple leg, quadruple leg, and endless types to

match the usage purpose.

High Product Quality realizes Safe and Highly Efficient Work•All Kito Chain Sling 100 products have a safety factor

of 5:1.

•Due to the inspections carried out in each

manufacturing process, link chains with high

dimensional accuracy are being manufactured.

•Fittings are forged from specially selected alloy steel

that undergoes quenching and tempering to realize high

strength and outstanding wear resistance.

•All products have a Kito Safety Tag attached. These

tags enable promotion of even safer work.

•Link chains offer great freedom of usage, so that

simple, speedy, and secure lifting work can be realized

by combining them with appropriate fittings.

Advanced Chain Manufacturing Technologies realize Outstanding Ultimate Elongation•Kito link chains have both a high breaking stress and

toughness due to the advanced chain manufacturing

technologies that are utilized. The factor that verifies

this is the numerical value known as the ultimate

elongation which achieves a value of 20% or more. In

addition, concerning the strength in the link bending

direction, the use of advanced welding technology gives

the links sufficient absorbability as shown by the

photograph (at bottom right) of the result of bending

test according to ISO 1834, and no

breakage or cracking occurs.

(However, this does not indicate that

the product should be used until it

reaches the condition shown in the

photograph.)

Achievement of Outstanding Economic Efficiency due to the High Wear Resistance•Regarding wear due to the chain linking, Kito’s unique

heat treatment technology exhibits its true worth so that

the wear factor of the link chains has become extremely

small. This enables the link chains to also sufficiently

withstand long-period use, realizing excellent economic

efficiency.

Kito Sling Tag

Linking the load to the crane, Kito Chain Sling 100 products prove their worth in the locations closest to the operator

Since its establishment in 1932, Kito has aimed

to create products that are safe and easy to operate.

Kito gives its primary consideration to safety

•Product Features

•Kito Sling Tag

•Link Chain Specification Table

•Selection Procedure


Fittings Components


Fittings Components Clevis Type

Fittings Components Eye Type

Standard Sling Types


Standard Sling Types Clevis Type SCP2

Standard Sling Types Eye Type SCE2

Standard Sling Types Eye Type SCE2 (HMS)

•Constituent Components Reference Example

•Large Master Link HL/HLD

•Example

•Reference Examples of Special Specification Systems

•Introduction to High Versatility Balance Beams

2

3

4

4

5

6

7

8

10

12

13

14

16

18

19

20

24

25

26

•Kito will also design and manufacture chain slings and accessories other than the standard products in response to user requests. Please feel free to contact your Kito dealer for more information.

Be certain to use the sling within the range of the working load limits that are indicated on the tag. The working load limits and angles of loading are inscribed based on the “Method of Lifting and working Load Limits” on page 5.

Because a space is prepared on the tag so that customers can write an optional administration number, please use this for your product safety administration.

CHAIN SLINGWARNING

・ALWAYS read owner’s manual.・NEVER lift more than WLL.

4

p

bwd R

•Link Chain Specification Table •Ordering Procedure

Link Chain Specification Table

Selection Procedure

Chain Diameterd

(mm)Code

Pitchp

(mm)

MaximumOutside Width

bw (mm)

W.L.L.(Working Load Limit)

(t)

BreakingForce(kN)

Mass (Weight)per Meter

(kg)

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

SV2060

SV2070

SV2080

SV2100

SV2130

SV2160

SV2200

18.0

21.0

24.0

30.0

39.0

48.0

60.0

22.2

25.9

29.6

37.0

48.1

59.2

74.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

56.5

77

101

160

268

402

630

0.8

1.1

1.4

2.2

3.8

5.85

9.5

SV


1. Work that is carried out with high frequency or when the working load is applied continuously

2. Work in which vibration is applied continuously

3. Usage by incorporation in an automatic line


In order to use products safely over a long period, when using products under the conditions described at below, the working load limits should be reduced to 80% and the appropriate slings should be selected.

Apply a pad to a sharp edge of the load when wrapping the chain around the edge with a radius smaller than the chain diameter. Reduce the working load limit to 70% of the value shown.

Sling Type Selection Number of legs, fittings, slinging methods

Clevis type or eye type

Confirming the working load limits according to the slinging method (Refer to the right side page.)

Determination of the reach (Calculation of the angle of loading ß)

Determination of the chain diameter

SelectionExample

1

SelectionExample

2

Set Product ClassificationTop Fitting Type

L DimensionChain Diameter

Bottom Fitting Type

Q - VD-VSS•6.0mm-1.0m

D-HM-OO•13mm-2.7m

In the situation where two-set slinging is necessary, calculation should be carried out assuming that half of the suspended load weight will be applied to the chain sling. In this situation, it will be important to take care that equal loading is applied to the two sets.

1 Set

2 Set

Regarding the Code, refer to “Kito Standard Sling Types [Way to Read The Code]” on page 13.

•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For slinging methods that do not have a “*” mark, no load reduction will be required. •The red-colored numerical values in the tables are exclusive values for “When using the Large Master Link HL/HLD” and “When using the Master Link HMS with Sub Links” respectively.

In basket hitch slinging, because the angle of loading will change according to the dimensions of the load, before use be certain to confirm the angle of loading and use the products within the range of the working load limits.

In the case of the selection example 2, both slings must be loaded equally.

What is the form of the suspended load?

What is the weight of the suspended load?

Load form = Box pallet•Clevis type•Quadruple leg slings with sling hooks (with hook latches)

Weight = 2t•Reach: L 1 m•The W.L.L. is 2.1 t at θ = 90° for 6 mm

Load form = H-beams (400 x 400)Lifting of 4 beams together•Eye type•Endless sling 2 sets

Total Weight = 7tWeight that can be supported by one sling set: 3.5 t•Reach: L 2.7 m•The W.L.L is 4.0 t (5.7 t × 70 % to account for the sharp edge) at θ = 60° for 13mm

L

When Using the Large Master Link HL/HLD

1.1

1.5

2.0

3.2

5.2

8.0

12.5

1.7

2.4

3.2

5.1

8.0

12.5

20.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

2.4

3.2

5.0

8.0

12.5

20.0

32.0

2.1

2.8

4.0

6.4

10.4

16.0

25.0

1.5

2.0

2.8

4.5

7.3

11.2

18.0

1.7

2.4

3.2

5.1

8.0

12.5

20.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

1.2

1.6

2.2

3.6

5.7

9.0

14.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

0.7

1.0

1.4

2.2

3.6

5.6

9.0

2.4

3.2

5.0

8.0

12.5

20.0

32.0

2.1

2.8

4.0

6.4

10.4

16.0

25.0

1.5

2.0

2.8

4.5

7.3

11.2

18.0

1.8

2.5

3.6

5.6

9.0

14.0

22.4

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

1.2

1.6

2.2

3.6

5.7

9.0

14.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

0.7

1.0

1.4

2.2

3.6

5.6

9.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

0.7

1.0

1.4

2.2

3.6

5.6

9.0

－ 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° －－

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

SingleLeg

DoubleLegs

Slinging Method

Angle of Loading θChain Diameter

(mm) Working Lord Limit (t)

Triple andQuadruple Legs Double Legs

Endless Choke Hitch

Quadruple Legs Single Leg Double Legs Double ChokeHitch

Note that in the case of using the Large Master Link HL/HLD or the Master Link HMS,the “Slinging Methods and W.L.L. (Working Load Limits)” will be different.

Please refer to the appropriate tables and use the product within the range of the working load limits.

1.1

1.5

2.0

3.2

5.0

8.0

11.5

1.7

2.0

3.2

5.0

8.0

11.5

－

1.5

2.0

2.8

4.5

7.3

11.2

－

1.1

1.5

2.0

3.2

5.2

8.0

－

2.0

3.2

5.0

8.0

11.5

－－

2.0

2.8

4.0

6.4

10.4

－－

1.5

2.0

2.8

4.5

7.3

－－

1.7

2.0

3.2

5.0

8.0

11.5

－

1.5

2.0

2.8

4.5

7.3

11.2

－

1.1

1.5

2.0

3.2

5.2

8.0

－

1.2

1.6

2.2

3.6

5.7

9.0

－

1.1

1.5

2.0

3.2

5.2

8.0

－

0.7

1.0

1.4

2.2

3.6

5.6

－

2.0

3.2

5.0

8.0

11.5

－－

2.0

2.8

4.0

6.4

10.4

－－

1.5

2.0

2.8

4.5

7.3

－－

1.8

2.5

3.6

5.6

9.0

－－

1.5

2.1

2.8

4.5

7.3

－－

1.1

1.5

2.0

3.2

5.2

－－

1.2

1.6

2.2

3.6

5.7

9.0

－

1.1

1.5

2.0

3.2

5.2

8.0

－

0.7

1.0

1.4

2.2

3.6

5.6

－

1.1

1.5

2.0

3.2

5.2

8.0

－

0.7

1.0

1.4

2.2

3.6

5.6

9.0

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

When Using Master Link HMS

－－－－

2.6

3.2

4.2

6.4

10.4

16.0

25.0

2.2

3.0

4.0

6.4

10.4

16.0

25.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

－－－－－－

2.6

3.2

4.2

6.4

10.4

16.0

25.0

2.2

3.0

4.0

6.4

10.4

16.0

25.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.8

2.5

3.6

5.6

9.0

14.0

22.4

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

－－－－－

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

θ

θ

Sharp edge

5

p

bwd R

•Link Chain Specification Table •Ordering Procedure

Link Chain Specification Table

Selection Procedure

Chain Diameterd

(mm)Code

Pitchp

(mm)

MaximumOutside Width

bw (mm)


(t)

BreakingForce(kN)

Mass (Weight)per Meter

(kg)

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

SV2060

SV2070

SV2080

SV2100

SV2130

SV2160

SV2200

18.0

21.0

24.0

30.0

39.0

48.0

60.0

22.2

25.9

29.6

37.0

48.1

59.2

74.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

56.5

77

101

160

268

402

630

0.8

1.1

1.4

2.2

3.8

5.85

9.5

SV


1. Work that is carried out with high frequency or when the working load is applied continuously

2. Work in which vibration is applied continuously

3. Usage by incorporation in an automatic line


In order to use products safely over a long period, when using products under the conditions described at below, the working load limits should be reduced to 80% and the appropriate slings should be selected.

Apply a pad to a sharp edge of the load when wrapping the chain around the edge with a radius smaller than the chain diameter. Reduce the working load limit to 70% of the value shown.

Sling Type Selection Number of legs, fittings, slinging methods

Clevis type or eye type

Confirming the working load limits according to the slinging method (Refer to the right side page.)

Determination of the reach (Calculation of the angle of loading ß)

Determination of the chain diameter

SelectionExample

1

SelectionExample

2

Set Product ClassificationTop Fitting Type

L DimensionChain Diameter

Bottom Fitting Type

Q - VD-VSS•6.0mm-1.0m

D-HM-OO•13mm-2.7m

In the situation where two-set slinging is necessary, calculation should be carried out assuming that half of the suspended load weight will be applied to the chain sling. In this situation, it will be important to take care that equal loading is applied to the two sets.

1 Set

2 Set

Regarding the Code, refer to “Kito Standard Sling Types [Way to Read The Code]” on page 13.

•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For slinging methods that do not have a “*” mark, no load reduction will be required. •The red-colored numerical values in the tables are exclusive values for “When using the Large Master Link HL/HLD” and “When using the Master Link HMS with Sub Links” respectively.

In basket hitch slinging, because the angle of loading will change according to the dimensions of the load, before use be certain to confirm the angle of loading and use the products within the range of the working load limits.

In the case of the selection example 2, both slings must be loaded equally.

What is the form of the suspended load?

What is the weight of the suspended load?

Load form = Box pallet•Clevis type•Quadruple leg slings with sling hooks (with hook latches)

Weight = 2t•Reach: L 1 m•The W.L.L. is 2.1 t at θ = 90° for 6 mm

Load form = H-beams (400 x 400)Lifting of 4 beams together•Eye type•Endless sling 2 sets

Total Weight = 7tWeight that can be supported by one sling set: 3.5 t•Reach: L 2.7 m•The W.L.L is 4.0 t (5.7 t × 70 % to account for the sharp edge) at θ = 60° for 13mm

L

When Using the Large Master Link HL/HLD

1.1

1.5

2.0

3.2

5.2

8.0

12.5

1.7

2.4

3.2

5.1

8.0

12.5

20.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

2.4

3.2

5.0

8.0

12.5

20.0

32.0

2.1

2.8

4.0

6.4

10.4

16.0

25.0

1.5

2.0

2.8

4.5

7.3

11.2

18.0

1.7

2.4

3.2

5.1

8.0

12.5

20.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

1.2

1.6

2.2

3.6

5.7

9.0

14.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

0.7

1.0

1.4

2.2

3.6

5.6

9.0

2.4

3.2

5.0

8.0

12.5

20.0

32.0

2.1

2.8

4.0

6.4

10.4

16.0

25.0

1.5

2.0

2.8

4.5

7.3

11.2

18.0

1.8

2.5

3.6

5.6

9.0

14.0

22.4

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

1.2

1.6

2.2

3.6

5.7

9.0

14.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

0.7

1.0

1.4

2.2

3.6

5.6

9.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

0.7

1.0

1.4

2.2

3.6

5.6

9.0

－ 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° －－

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

SingleLeg

DoubleLegs

Slinging Method

Angle of Loading θChain Diameter

(mm) Working Lord Limit (t)

Triple andQuadruple Legs Double Legs

Endless Choke Hitch

Quadruple Legs Single Leg Double Legs Double ChokeHitch

Note that in the case of using the Large Master Link HL/HLD or the Master Link HMS,the “Slinging Methods and W.L.L. (Working Load Limits)” will be different.

Please refer to the appropriate tables and use the product within the range of the working load limits.

1.1

1.5

2.0

3.2

5.0

8.0

11.5

1.7

2.0

3.2

5.0

8.0

11.5

－

1.5

2.0

2.8

4.5

7.3

11.2

－

1.1

1.5

2.0

3.2

5.2

8.0

－

2.0

3.2

5.0

8.0

11.5

－－

2.0

2.8

4.0

6.4

10.4

－－

1.5

2.0

2.8

4.5

7.3

－－

1.7

2.0

3.2

5.0

8.0

11.5

－

1.5

2.0

2.8

4.5

7.3

11.2

－

1.1

1.5

2.0

3.2

5.2

8.0

－

1.2

1.6

2.2

3.6

5.7

9.0

－

1.1

1.5

2.0

3.2

5.2

8.0

－

0.7

1.0

1.4

2.2

3.6

5.6

－

2.0

3.2

5.0

8.0

11.5

－－

2.0

2.8

4.0

6.4

10.4

－－

1.5

2.0

2.8

4.5

7.3

－－

1.8

2.5

3.6

5.6

9.0

－－

1.5

2.1

2.8

4.5

7.3

－－

1.1

1.5

2.0

3.2

5.2

－－

1.2

1.6

2.2

3.6

5.7

9.0

－

1.1

1.5

2.0

3.2

5.2

8.0

－

0.7

1.0

1.4

2.2

3.6

5.6

－

1.1

1.5

2.0

3.2

5.2

8.0

－

0.7

1.0

1.4

2.2

3.6

5.6

9.0

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

When Using Master Link HMS

－－－－

2.6

3.2

4.2

6.4

10.4

16.0

25.0

2.2

3.0

4.0

6.4

10.4

16.0

25.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

－－－－－－

2.6

3.2

4.2

6.4

10.4

16.0

25.0

2.2

3.0

4.0

6.4

10.4

16.0

25.0

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.8

2.5

3.6

5.6

9.0

14.0

22.4

1.5

2.1

2.8

4.5

7.3

11.2

18.0

1.1

1.5

2.0

3.2

5.2

8.0

12.5

－－－－－

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

θ

θ

Sharp edge

6


ChainDiameter

(mm)Code Chain Pin

D1 x L1Spring Pin

d2 x l2 Applicable Fittings

VP2060

VP2060B

VP2060K

VP2070

VP2070K

VP2080

VP2080K

VP2100

VP2100F

VP2100K

VP2100B

VP2130

VP2130F

VP2130K

VP2130B

VP2160

VP2160F

VP2160K

VP2160B

VP2200

VP2200K

VP2250

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

(ø20.0)

ø3x16

ø2.5X16

ø3x20

ø3x20

ø3x25

ø3x20

ø3x25

ø3x26

ø3x28

ø4x32

ø3x26

ø4x32

ø4x36

ø5x40

ø4x36

ø4x36

ø4.5x40

ø5x50

ø4.5x40

ø5x50

ø6x63

ø10x70

VG2060

VSL2060

VA2060

VG2070

VA2070

VG2080

VA2080

VW2100

VG2100

VA2100

VSL2100

VW2130

VG2130

VA2130

VSL2130

VW2160

VG2160

VA2160

VSL2160

VG2200

VA2200

VD20020

VW2060

VB2060

VW2070

VB2070

VW2080

VB2080

VF2100

VB2100

VF2130

VB2130

VF2160

VB2160

VB2200

VF2060

VC2060

VF2070

VC2070

VF2080

VC2080

VC2100

VC2130

VC2160

VC2200

VD2060

VSL2070

VD20706

VD20807

VD21008

VD21310

VD21613

VD22016

VE2060

VE2070

VE2080

VE2100

VE2130

VE2160

VE2200

VN2060

VN2070

VN2080

VN2100

VN2130

VN2160

VN2200

VR2060

VR2070

VR2080

VR2100

VR2130

VR2160

VR2200

VSL3060

VSL3070

VSL3080

VSL3100

VSL3130

VSL3160

VSL3200

ø7.5x17.5

ø9x22.5

ø10x22.5

ø13x31.5

ø13x29.5

ø16x42

ø16x37

ø21x51.5

ø20x52

ø24x61.5

ø24x73

ø32x95

All clevis-type fittings have chain pins and spring pins packed together with them. When purchasing Kit of Pin for clevis hook as replacements, purchase the Chain Pin Set that matches the fitting according to the table described below.

Clevis-type and eye-type fittings components are available

for Kito chain sling 100 products. Selection can be made from among

a wide range of types to match the usage purposes.

Fittings Components

Chain Pin

Spring Pin

L1

D1

l2

d2


7


ChainDiameter

(mm)Code Chain Pin

D1 x L1Spring Pin

d2 x l2 Applicable Fittings

VP2060

VP2060B

VP2060K

VP2070

VP2070K

VP2080

VP2080K

VP2100

VP2100F

VP2100K

VP2100B

VP2130

VP2130F

VP2130K

VP2130B

VP2160

VP2160F

VP2160K

VP2160B

VP2200

VP2200K

VP2250

ø6.0

ø7.0

ø8.0

ø10.0

ø13.0

ø16.0

ø20.0

(ø20.0)

ø3x16

ø2.5X16

ø3x20

ø3x20

ø3x25

ø3x20

ø3x25

ø3x26

ø3x28

ø4x32

ø3x26

ø4x32

ø4x36

ø5x40

ø4x36

ø4x36

ø4.5x40

ø5x50

ø4.5x40

ø5x50

ø6x63

ø10x70

VG2060

VSL2060

VA2060

VG2070

VA2070

VG2080

VA2080

VW2100

VG2100

VA2100

VSL2100

VW2130

VG2130

VA2130

VSL2130

VW2160

VG2160

VA2160

VSL2160

VG2200

VA2200

VD20020

VW2060

VB2060

VW2070

VB2070

VW2080

VB2080

VF2100

VB2100

VF2130

VB2130

VF2160

VB2160

VB2200

VF2060

VC2060

VF2070

VC2070

VF2080

VC2080

VC2100

VC2130

VC2160

VC2200

VD2060

VSL2070

VD20706

VD20807

VD21008

VD21310

VD21613

VD22016

VE2060

VE2070

VE2080

VE2100

VE2130

VE2160

VE2200

VN2060

VN2070

VN2080

VN2100

VN2130

VN2160

VN2200

VR2060

VR2070

VR2080

VR2100

VR2130

VR2160

VR2200

VSL3060

VSL3070

VSL3080

VSL3100

VSL3130

VSL3160

VSL3200

ø7.5x17.5

ø9x22.5

ø10x22.5

ø13x31.5

ø13x29.5

ø16x42

ø16x37

ø21x51.5

ø20x52

ø24x61.5

ø24x73

ø32x95

All clevis-type fittings have chain pins and spring pins packed together with them. When purchasing Kit of Pin for clevis hook as replacements, purchase the Chain Pin Set that matches the fitting according to the table described below.

Clevis-type and eye-type fittings components are available

for Kito chain sling 100 products. Selection can be made from among

a wide range of types to match the usage purposes.

Fittings Components

Chain Pin

Spring Pin

L1

D1

l2

d2


8

b

a

t

mp

a

t

m p

b

t

n

p

s

b

b m

p

s

b

pm

l

r

a

cp

d

l

b

h

p l

b

t

h b

t

p l

b

a

t

p l

b

p l

t

m'

p

s

n

b

t

m'

p

s

n

b

Clevis Master Link

▲

For single leg slings

▲

For double leg slings

▲

For triple and quadruple leg slings(Using Single Connector VA or Dual Connector VB)

VE

VD

VD

VF

VG

VWClevis Master Link

VSL(VSL3)

Sling Hook

Shackle

VN

Single Connector

VC

Endless Connector

VR

Foundry Hook

Grab Hook

Shortening Clutch

•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•Each fitting has the chain pins and spring pins attached.•The weight of each fitting includes the weights of the chain pins and spring pins.

Single Connector

VA

Dual Connector

VBDual Connector VB

Single Connector VA

Triple

Quadruple

Single Connector VB

VD

F i t t i n g s

Clevis Type

•In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the table at right.


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VN2060VN2070VN2080VN2100VN2130VN2160VN2200

6570.570

79.599.5124.5160.5

0.53

0.89

1.52.75.811.4

ChainDiameter

(mm)

Mass(Weight)

(kg)p

26.5

30.5

344354

68.5

a

50

60

6885106135

b

43

47.5

536784105

c

14

17

20253240

d

103

116

135.5169214

271.5

lCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VC2060VC2070VC2080VC2100VC2130VC2160VC2200

5065

64.579

99.5124159

0.28

0.51

1.02.04.28.3

ChainDiameter

(mm)

Mass(Weight)

(kg)p

18.5

26.5

32.54254

67.5

a

45

60

7494120150

b

77.5

99.5

123154194246

l

13.5

17

21.526.533.542

tCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

ø6ø7

ø10ø13ø16

VR2060VR2070VR2080VR2100VR2130VR2160VR2200

25.5313039506480

0.240.410.420.831.63.56.4

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44

546684102

b

55

67

86108139172

lCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

ø6ø7ø8

ø10ø13ø16

VF2060VF2070VF2080VF2100VF2130VF2160

0.7

1.1

1.73.65.6

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

100

120.4

131165

198.5

p

32

40

505868

b

53

64

7689101

n

26

31

3444.550.5

s

21.5

25.5

25.54045

t


(t)

1.11.52.03.25.28.0

ø6ø7ø8

ø10ø13ø16

VW2060VW2070VW2080VW2100VW2130VW2160

0.21

0.48

1.11.82.8

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

45

56

7890106

p

30

35

475870

b

88.69.612.51519

m

2427.530.538.550.562

r

74

92.5

125.5146.5172

l


(t)

1.11.52.03.25.28.0

12.5

ø6 ø7 ø8

ø10 ø13 ø16 ø20

VG2060VG2070VG2080VG2100VG2130VG2160VG2200

0.2

0.44

0.962.13.45.2

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

50.565.56580

105.5112145

p

30

37

4556

67.584

b

8

10

131619

23.5

m

20.5

27.5

3647

60.575.5

s

Clevis Type

StandardSling Types

Single Leg Sling/Double Leg Sling

Triple Leg Sling/Quadruple Leg Sling

P14

P15

•The chain diameters D and TQ show the number of sling legs. D: Double leg slings, TQ: Triple and quadruple leg slings


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VE2060VE2070VE2080VE2100VE2130VE2160VE2200

115131

130.5146

169.5199250

0.38

0.65

1.12.24.38.5

ChainDiameter

(mm)

Mass(Weight)

(kg)p

56

63

718090112

a

79

91

105122142176

b

90

100

110125145180

m

11.5

14

17212632

tCode

Dimensions (mm)

VSL(VSL2)

Sling Hook (Small Hook)W.L.L.

(Working Load Limit)

(t)

1.11.53.25.28.0

VSL2060VSL2070VSL2100VSL2130VSL2160

6995110136155

0.250.551.0 1.73.2

ChainDiameter

(mm)

Mass(Weight)

(kg)p

29.536

44.55167

b

29.539475864

n

1725293743

m’

20.528334149

s

15192530

37.5

tCode

Dimensions (mm)


(t)

1.72.43.25.18.0

12.520.032.0

ø6ø7ø8

ø10ø13ø16ø20－

－ ø6ø7ø8

ø10ø13ø16ø20

VD206VD20706VD20807VD21008VD21310VD21613VD22016VD20020

125140

139.5159

179.5224279359

0.75

1.2

2.24.18.014.930.2

Chain Diameter(mm) Mass

(Weight)(kg)pD T,Q

63

71

8090112140180

a

91

105

122142176220280

b

100

110

125140180225280

m

14

17

2126324050

tCode

Dimensions (mm)

ø6ø7ø8

ø10ø13ø16ø20

VA2060VA2070VA2080VA2100VA2130VA2160VA2200

39.54350598099

119.5

0.230.310.390.721.53.05.3

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44546684102

h

22

27

34425468

b

6975.584.5102132167201

l

7810

12.5162025

tCode

Dimensions (mm)

ø6ø7ø8

ø10ø13ø16ø20

VB2060VB2070VB2080VB2100VB2130VB2160VB2200

39.54350598099

119.5

0.340.470.621.22.34.98.6

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44546684102

h

48

57

7290114142

b

707786104134170205

l

7810

12.5162025

tCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VSL3060VSL3070VSL3080VSL3100VSL3130VSL3160VSL3200

8510099.5119140

168.5209

0.55

0.94

1.73.57.011.8

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44

546684102

b

45

50

56637595

n

26

31

39465368

m’

24.5

30

37.547.56075

s

18

21.8

27.234.54556

tCode

Dimensions (mm)

9

b

a

t

mp

a

t

m p

b

t

n

p

s

b

b m

p

s

b

pm

l

r

a

cp

d

l

b

h

p l

b

t

h b

t

p l

b

a

t

p l

b

p l

t

m'

p

s

n

b

t

m'

p

s

n

b

Clevis Master Link

▲

For single leg slings

▲

For double leg slings

▲

For triple and quadruple leg slings(Using Single Connector VA or Dual Connector VB)

VE

VD

VD

VF

VG

VWClevis Master Link

VSL(VSL3)

Sling Hook

Shackle

VN

Single Connector

VC

Endless Connector

VR

Foundry Hook

Grab Hook

Shortening Clutch

•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•Each fitting has the chain pins and spring pins attached.•The weight of each fitting includes the weights of the chain pins and spring pins.

Single Connector

VA

Dual Connector

VBDual Connector VB

Single Connector VA

Triple

Quadruple

Single Connector VB

VD

F i t t i n g s

Clevis Type

•In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the table at right.


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VN2060VN2070VN2080VN2100VN2130VN2160VN2200

6570.570

79.599.5124.5160.5

0.53

0.89

1.52.75.811.4

ChainDiameter

(mm)

Mass(Weight)

(kg)p

26.5

30.5

344354

68.5

a

50

60

6885106135

b

43

47.5

536784105

c

14

17

20253240

d

103

116

135.5169214

271.5

lCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VC2060VC2070VC2080VC2100VC2130VC2160VC2200

5065

64.579

99.5124159

0.28

0.51

1.02.04.28.3

ChainDiameter

(mm)

Mass(Weight)

(kg)p

18.5

26.5

32.54254

67.5

a

45

60

7494120150

b

77.5

99.5

123154194246

l

13.5

17

21.526.533.542

tCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

ø6ø7

ø10ø13ø16

VR2060VR2070VR2080VR2100VR2130VR2160VR2200

25.5313039506480

0.240.410.420.831.63.56.4

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44

546684102

b

55

67

86108139172

lCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

ø6ø7ø8

ø10ø13ø16

VF2060VF2070VF2080VF2100VF2130VF2160

0.7

1.1

1.73.65.6

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

100

120.4

131165

198.5

p

32

40

505868

b

53

64

7689101

n

26

31

3444.550.5

s

21.5

25.5

25.54045

t


(t)

1.11.52.03.25.28.0

ø6ø7ø8

ø10ø13ø16

VW2060VW2070VW2080VW2100VW2130VW2160

0.21

0.48

1.11.82.8

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

45

56

7890106

p

30

35

475870

b

88.69.612.51519

m

2427.530.538.550.562

r

74

92.5

125.5146.5172

l


(t)

1.11.52.03.25.28.0

12.5

ø6 ø7 ø8

ø10 ø13 ø16 ø20

VG2060VG2070VG2080VG2100VG2130VG2160VG2200

0.2

0.44

0.962.13.45.2

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

50.565.56580

105.5112145

p

30

37

4556

67.584

b

8

10

131619

23.5

m

20.5

27.5

3647

60.575.5

s

Clevis Type

StandardSling Types



P14

P15

•The chain diameters D and TQ show the number of sling legs. D: Double leg slings, TQ: Triple and quadruple leg slings


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VE2060VE2070VE2080VE2100VE2130VE2160VE2200

115131

130.5146

169.5199250

0.38

0.65

1.12.24.38.5

ChainDiameter

(mm)

Mass(Weight)

(kg)p

56

63

718090112

a

79

91

105122142176

b

90

100

110125145180

m

11.5

14

17212632

tCode

Dimensions (mm)

VSL(VSL2)

Sling Hook (Small Hook)W.L.L.

(Working Load Limit)

(t)

1.11.53.25.28.0

VSL2060VSL2070VSL2100VSL2130VSL2160

6995110136155

0.250.551.0 1.73.2

ChainDiameter

(mm)

Mass(Weight)

(kg)p

29.536

44.55167

b

29.539475864

n

1725293743

m’

20.528334149

s

15192530

37.5

tCode

Dimensions (mm)


(t)

1.72.43.25.18.0

12.520.032.0

ø6ø7ø8

ø10ø13ø16ø20－

－ ø6ø7ø8

ø10ø13ø16ø20

VD206VD20706VD20807VD21008VD21310VD21613VD22016VD20020

125140

139.5159

179.5224279359

0.75

1.2

2.24.18.014.930.2


(Weight)(kg)pD T,Q

63

71

8090112140180

a

91

105

122142176220280

b

100

110

125140180225280

m

14

17

2126324050

tCode

Dimensions (mm)

ø6ø7ø8

ø10ø13ø16ø20

VA2060VA2070VA2080VA2100VA2130VA2160VA2200

39.54350598099

119.5

0.230.310.390.721.53.05.3

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44546684102

h

22

27

34425468

b

6975.584.5102132167201

l

7810

12.5162025

tCode

Dimensions (mm)

ø6ø7ø8

ø10ø13ø16ø20

VB2060VB2070VB2080VB2100VB2130VB2160VB2200

39.54350598099

119.5

0.340.470.621.22.34.98.6

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44546684102

h

48

57

7290114142

b

707786104134170205

l

7810

12.5162025

tCode

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

VSL3060VSL3070VSL3080VSL3100VSL3130VSL3160VSL3200

8510099.5119140

168.5209

0.55

0.94

1.73.57.011.8

ChainDiameter

(mm)

Mass(Weight)

(kg)p

38

44

546684102

b

45

50

56637595

n

26

31

39465368

m’

24.5

30

37.547.56075

s

18

21.8

27.234.54556

tCode

Dimensions (mm)

10

t

n

m

c

p

s

m'

ba

t

n

p

s

m'

m

ba

t

n

p

s

a

b

b

a m

p

s

e

d

p

c

ab

f

a

d

p t

g

t

b

a

m'

n

p

s

t

b

a

m'

n

p

s

Master Link

HM

Self Locking Hook

HJ

Swivel Hook

HK

Foundry Hook

HQ

Grab Hook

HH

1.11.52.03.25.28.0

ø6ø7ø8

ø10ø13ø16

HJ2060

HJ2080

HJ2100HJ2130HJ2160

109

135

168205251

0.5

0.96

1.73.36.1

p

19.5

24.5

3238.548

a

11

12

162027

b

34.5

43.5

566980

n

28

34

4551.559

m

28

34

4551.559

m’

20.5

25.5

30.539.549

s

15.8

20.5

24.534.536.5

t

1.11.52.03.25.2

ø6ø7ø8

ø10ø13

HK2060

HK2080

HK2100HK2130

158

182

217271

0.6

1.1

2.0 4.0

p

35.5

35.5

43.548.5

a

14

14

17.522.5

b

26

26

3343

c

34.5

43.5

5669

n

28

34

4551.5

m

28

34

4551.5

m’

20.5

25.5

30.539.5

s

15.8

20.5

24.534.5

t

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HQ2060

HQ2080

HQ2100HQ2130HQ2160HQ2200

102.5

125

150173210260

0.61

0.92

1.82.85.07.6

p

13.5

22.5

3025.545

53.5

a

12.5

15

16.520.526

30.5

b

53

62

7689101116

n

26

31.5

3444.550.565

s

21.5

26

26404554

t

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HH2060

HH2080

HH2100HH2130HH2160HH2200

51.5

69

86.5110.5129172

0.18

0.4

0.882.03.24.9

p

12

15.5

20.523.53037

a

10

12.5

17.519.523

28.5

b

8

10

131619

23.5

m

20.5

27

3647.560.575.5

s

Hi-coupling

HC 1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HC3060HC3070HC3080HC3100HC3130HC3160HC3200

0.10.180.210.420.861.73.2

This eye-type fitting can be widely used with various kinds of lifting tools (including wire rope). In addition, please contact your Kito dealer regarding special fittings.

•The chain diameters S,D,TQ show the number of sling legs. S: Single leg slings, D: Double leg slings, TQ: Triple and Quadruple leg slings.

•In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the table at right.

•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of the eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•In addition to using the eye-type components by assembling them as Kito Chain Sling 100 products, they can also be used for many other purposes.•Each fitting is not provided with a Hi-coupling. This should be ordered at the same time when placing the order for the fitting.

F i t t i n g s

Eye Type

Sling Hook

HTL(HTL3)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HTL3060

HTL3080

HTL3100HTL3130HTL3160HTL3200

100

120

140171200250

0.49 0.84

1.6 3.0 5.710.4

ChainDiameter

(mm)

Mass(Weight)

(kg)p

23

27

32.5384654

a

11

13.5

1721.526.534

b

45

50

56637595

n

26

31

39465368

m’

24.5

30

37.547.56075

s

18

21.8

27.234.54556

tCode

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

Eye Type

StandardSling Types



P16

P17

4855637596118142

p

16.819.422

26.534

41.552.5

a

4551577089110136

b

17.5192327364553

c

89.410.613.116.82025

d

14.316.817.522.328.83645

e

14161822303645

f

11.213.115

18.724.330

37.5

g


(t)

2.63.24.26.4

10.416.025.0

ø6ø7ø8

ø10ø13ø16ø20

HMS2060HMS2070HMS2080HMS2100HMS2130HMS2160HMS2200

135

160180200260350

1.3

2.33.56.39.6

22.7

ChainDiameter

(mm)

Mass(Weight)

(kg)p

75

90100110140190

a

18

2226323651

d

54

7085115140150

p1

25

3440506570

a1

13

1618222632

d1Code

Dimensions (mm)

The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.

Master Link with Sub Links

HMS a

d

p

a1d1

p1

▲

For triple and quadruple Leg slings

Master Link HMSEye Type

StandardSling Types Triple Leg Sling/Quadruple Leg Sling

P18

Sling Hook (Small Hook)

HTL(HTL2)1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HTL2060

HTL2080


81

101

131159183203

0.25

0.5

0.971.93.34.5

p

18.5

23.5

32.541.548

52.5

a

11.5

11

1619

24.527

b

29.5

39

4758

64.576

n

17

25

293743

52.5

m’

20.5

27

3343

48.553

s

16.5

19

26334051

t


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

1.11.72.43.25.28.0

12.5

20.0

ø6ø7ø8

ø10ø13ø16－

ø20－

－ ø6ø7ø8

ø10ø13ø16－

ø20

HM20706

HM20807HM21008HM21310HM21613HM21816HM22018HM200

110

110135160180200260280

0.34

0.530.921.62.54.16.28.1


(Weight)(kg)p

60

607590

100110

140

a

13

16182226323640

d

11

1415

18.522283034

tS D

－

ø6ø7ø8

ø10ø13－ ø16

T,QCode

Dimensions (mm)

11

t

n

m

c

p

s

m'

ba

t

n

p

s

m'

m

ba

t

n

p

s

a

b

b

a m

p

s

e

d

p

c

ab

f

a

d

p t

g

t

b

a

m'

n

p

s

t

b

a

m'

n

p

s

Master Link

HM

Self Locking Hook

HJ

Swivel Hook

HK

Foundry Hook

HQ

Grab Hook

HH

1.11.52.03.25.28.0

ø6ø7ø8

ø10ø13ø16

HJ2060

HJ2080

HJ2100HJ2130HJ2160

109

135

168205251

0.5

0.96

1.73.36.1

p

19.5

24.5

3238.548

a

11

12

162027

b

34.5

43.5

566980

n

28

34

4551.559

m

28

34

4551.559

m’

20.5

25.5

30.539.549

s

15.8

20.5

24.534.536.5

t

1.11.52.03.25.2

ø6ø7ø8

ø10ø13

HK2060

HK2080

HK2100HK2130

158

182

217271

0.6

1.1

2.0 4.0

p

35.5

35.5

43.548.5

a

14

14

17.522.5

b

26

26

3343

c

34.5

43.5

5669

n

28

34

4551.5

m

28

34

4551.5

m’

20.5

25.5

30.539.5

s

15.8

20.5

24.534.5

t

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HQ2060

HQ2080

HQ2100HQ2130HQ2160HQ2200

102.5

125

150173210260

0.61

0.92

1.82.85.07.6

p

13.5

22.5

3025.545

53.5

a

12.5

15

16.520.526

30.5

b

53

62

7689101116

n

26

31.5

3444.550.565

s

21.5

26

26404554

t

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HH2060

HH2080

HH2100HH2130HH2160HH2200

51.5

69

86.5110.5129172

0.18

0.4

0.882.03.24.9

p

12

15.5

20.523.53037

a

10

12.5

17.519.523

28.5

b

8

10

131619

23.5

m

20.5

27

3647.560.575.5

s

Hi-coupling

HC 1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HC3060HC3070HC3080HC3100HC3130HC3160HC3200

0.10.180.210.420.861.73.2

This eye-type fitting can be widely used with various kinds of lifting tools (including wire rope). In addition, please contact your Kito dealer regarding special fittings.

•The chain diameters S,D,TQ show the number of sling legs. S: Single leg slings, D: Double leg slings, TQ: Triple and Quadruple leg slings.

•In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the table at right.

•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of the eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•In addition to using the eye-type components by assembling them as Kito Chain Sling 100 products, they can also be used for many other purposes.•Each fitting is not provided with a Hi-coupling. This should be ordered at the same time when placing the order for the fitting.

F i t t i n g s

Eye Type

Sling Hook

HTL(HTL3)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HTL3060

HTL3080


100

120

140171200250

0.49 0.84

1.6 3.0 5.710.4

ChainDiameter

(mm)

Mass(Weight)

(kg)p

23

27

32.5384654

a

11

13.5

1721.526.534

b

45

50

56637595

n

26

31

39465368

m’

24.5

30

37.547.56075

s

18

21.8

27.234.54556

tCode

Dimensions (mm)


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)

Eye Type

StandardSling Types



P16

P17

4855637596118142

p

16.819.422

26.534

41.552.5

a

4551577089110136

b

17.5192327364553

c

89.410.613.116.82025

d

14.316.817.522.328.83645

e

14161822303645

f

11.213.115

18.724.330

37.5

g


(t)

2.63.24.26.4

10.416.025.0

ø6ø7ø8

ø10ø13ø16ø20

HMS2060HMS2070HMS2080HMS2100HMS2130HMS2160HMS2200

135

160180200260350

1.3

2.33.56.39.6

22.7

ChainDiameter

(mm)

Mass(Weight)

(kg)p

75

90100110140190

a

18

2226323651

d

54

7085115140150

p1

25

3440506570

a1

13

1618222632

d1Code

Dimensions (mm)

The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.

Master Link with Sub Links

HMS a

d

p

a1d1

p1

▲

For triple and quadruple Leg slings

Master Link HMSEye Type

StandardSling Types Triple Leg Sling/Quadruple Leg Sling

P18

Sling Hook (Small Hook)

HTL(HTL2)1.11.52.03.25.28.0

12.5

ø6ø7ø8

ø10ø13ø16ø20

HTL2060

HTL2080


81

101

131159183203

0.25

0.5

0.971.93.34.5

p

18.5

23.5

32.541.548

52.5

a

11.5

11

1619

24.527

b

29.5

39

4758

64.576

n

17

25

293743

52.5

m’

20.5

27

3343

48.553

s

16.5

19

26334051

t


(t)

ChainDiameter

(mm)

Mass(Weight)

(kg)Code

Dimensions (mm)


(t)

1.11.72.43.25.28.0

12.5

20.0

ø6ø7ø8

ø10ø13ø16－

ø20－

－ ø6ø7ø8

ø10ø13ø16－

ø20

HM20706

HM20807HM21008HM21310HM21613HM21816HM22018HM200

110

110135160180200260280

0.34

0.530.921.62.54.16.28.1


(Weight)(kg)p

60

607590

100110

140

a

13

16182226323640

d

11

1415

18.522283034

tS D

－

ø6ø7ø8

ø10ø13－ ø16

T,QCode

Dimensions (mm)

12


The Code of the Kito Standard Sling Types consist of the three types described below.

VES VSS

SingleLeg Sling

Sling Type

1

Top Fitting

2

Bottom Fitting

3

Ex.1: Clevis Type

S

D

T

Q

Single Leg Sling

Double Leg Sling

Triple Leg Sling

Quadruple Leg Sling

Single Chain Suspension

Double Chain Suspension

Triple Chain Suspension

Quadruple Chain Suspension

HMQ HTS

QuadrupleLeg Sling

Sling Type

1

Top Fitting

2

Bottom Fitting

3VEVDHMHL

HLDHMSVSSVSNHTSHTNVW

Ex.2: Eye Type

Clevis Master Link VE (VE2)

Clevis Master Link VD (VD2)

Master Link HM (HM2)

Large Master Link HL (HL)

Large Master Link HLD (HLD)

Master Link HMS with Sub Links (HMS)

Sling Hook VSL (VSL3)


Sling Hook HTL (HTL3)


Shortening Clutch VW (VW2)

HHHJHKHMHL

HLDHQHTSHTNVCVEVFVGVN

VSSVSNVWOO

Grab Hook HH (HH2)

Self Locking Hook HJ (HJ2)

Swivel Hook HK (HK2)




Foundry Hook HQ (HQ2)



Connector VC (VC2)

Master Ring VE (VE2)

Foundry Hook VF (VF2)

Grab Hook VG (VG2)

Shackle VN (VN2)




Endless Connector

This shows the basic system of the Sling Types.

A wide range of types of Standard Sling Types,

from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products.

These should be selected to match the usage purpose.

Standard Sling TypesKITO CHAIN SLING 100

13


The Code of the Kito Standard Sling Types consist of the three types described below.

VES VSS

SingleLeg Sling

Sling Type

1

Top Fitting

2

Bottom Fitting

3

Ex.1: Clevis Type

S

D

T

Q

Single Leg Sling

Double Leg Sling

Triple Leg Sling

Quadruple Leg Sling

Single Chain Suspension

Double Chain Suspension

Triple Chain Suspension

Quadruple Chain Suspension

HMQ HTS

QuadrupleLeg Sling

Sling Type

1

Top Fitting

2

Bottom Fitting

3VEVDHMHL

HLDHMSVSSVSNHTSHTNVW

Ex.2: Eye Type

Clevis Master Link VE (VE2)

Clevis Master Link VD (VD2)




Master Link HMS with Sub Links (HMS)






HHHJHKHMHL

HLDHQHTSHTNVCVEVFVGVN

VSSVSNVWOO

Grab Hook HH (HH2)

Self Locking Hook HJ (HJ2)

Swivel Hook HK (HK2)




Foundry Hook HQ (HQ2)



Connector VC (VC2)

Master Ring VE (VE2)

Foundry Hook VF (VF2)

Grab Hook VG (VG2)

Shackle VN (VN2)




Endless Connector

This shows the basic system of the Sling Types.

A wide range of types of Standard Sling Types,

from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products.

These should be selected to match the usage purpose.

Standard Sling TypesKITO CHAIN SLING 100

14

•Single Leg Sling•Double Leg Sling•Triple Leg Sling•Quadruple Leg Sling

A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.

S t a n d a r d S l i n g Ty p e s

ClevisType SCP2

Clevis Type Single Leg Sling


(t)

Chain Diameter(mm)

(x Number of Chains)

Dimensions (mm)Mass (Weight) (kg)

Code

S-VE-VE S-VE-VSS S-VE-VF *S-VE-VG S-VE-VC S-VE-VN S-VE-VW S-VSS-VSS *S-VSS-VG S-VSS-VW S-VW-VW

1.1 φ6（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.14 Weight 1.8 2.0 2.1 1.7 1.7 2.0 1.7 2.2 1.9 1.9 0.46

1.5 φ7（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.17Weight 2.7 3.0 3.2 2.5 2.6 3.0 2.6 3.3 2.9 2.9 1.0

2.0 φ8（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.18Weight 3.1 3.4 3.5 2.9 3.0 3.4 3.0 3.7 3.3 3.4 1.1

3.2 φ10（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.24Weight 4.9 5.6 5.5 4.9 4.9 5.4 5.1 6.3 5.6 5.7 2.4

5.2 φ13（×1） Reach: L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 0.29Weight 10.8 12.4 12.2 11.0 10.9 11.6 10.8 13.7 12.3 12.1 4.0

8.0 φ16（×1） Reach: L 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.35Weight 22.6 25.3 23.9 22.4 23.2 24.8 21.5 28.7 25.1 24.8 6.5

12.5 φ20（×1） Reach: L 3.0 3.0 - 3.0 3.0 3.0 - 3.0 3.0 - -Weight 43.1 46.4 - 41.0 44.1 47.2 - 50.9 44.3 - -

Clevis Type Double Leg Sling


(t) θ=60°

Chain Diameter(mm)


Dimensions (mm)Mass(Weight) (kg)

Code

D-VD-VSS D-VD-VF D-VD-VC D-VD-VN D-VD-OO

1.7 φ6（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 3.9 4.2 3.4 3.9 3.0

2.4 φ7（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 5.9 6.2 5.1 5.8 4.3

3.2 φ8（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 6.7 6.9 5.8 6.6 5.1

5.1 φ10（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.1 11.1 10.0 11.0 8.3

8.0 φ13（×2） Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 24.1 24.3 21.7 23.1 18.5

12.5 φ16（×2） Reach: L 2.5 2.5 2.5 2.5 2.5 Weight 49.5 46.7 45.1 48.3 38.3

20.0 φ20（×2） Reach: L 3.0 - 3.0 3.0 3.0 Weight 89.4 - 84.8 91.0 71.3

•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

S-VE-VE S-VE-VSS S-VE-VF S-VE-VG* S-VE-VC S-VE-VN S-VE-VW S-VSS-VSS S-VSS-VG* S-VSS-VW S-VW-VW

D-VD-VSS D-VD-VF D-VD-VC D-VD-VN D-VD-OO

L L L L L L L L L L

LLLLL

L

15

•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.

Clevis Type Triple Leg Sling


(t) θ=60°

Chain Diameter(mm)



Code

T-VD-VSS T-VD-VF T-VD-VC T-VD-VN

2.4 φ6（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 6.4 6.9 5.7 6.4

3.2 φ7（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 8.9 9.4 7.7 8.9

5.0 φ8（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 11.2 11.4 10.1 11.0

8.0 φ10（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 18.8 18.8 17.1 18.6

12.5 φ13（×3） Reach: L 2.0 2.0 2.0 2.0 Weight 40.5 40.8 36.0 38.1

20.0 φ16（×3） Reach: L 2.5 2.5 2.5 2.5 Weight 82.2 78.0 75.6 80.4

32.0 φ20（×3） Reach: L 3.0 - 3.0 3.0 Weight 150.4 - 143.5 152.8

Clevis Type Quadruple Leg Sling


(t) θ=60°

Chain Diameter(mm)



Code

Q-VD-VSS Q-VD-VF Q-VD-VC Q-VD-VN Q-VD-OO

2.4 φ6（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 8.2 8.7 7.1 8.1 6.2

3.2 φ7（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.5 12.0 9.8 11.3 8.0

5.0 φ8（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 14.3 14.4 12.6 13.9 10.8

8.0 φ10（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 24.0 23.6 21.3 23.3 18.0

12.5 φ13（×4） Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 51.8 51.3 44.9 47.7 39.0

20.0 φ16（×4） Reach: L 2.5 2.5 2.5 2.5 2.5 Weight 105.6 98.3 95.2 101.6 81.5

32.0 φ20（×4） Reach: L 3.0 - 3.0 3.0 3.0 Weight 192.3 - 180.0 192.4 152.8

Q-VD-VSS Q-VD-VF Q-VD-VC Q-VD-VN Q-VD-OO

T-VD-VSS T-VD-VF T-VD-VC T-VD-VN

L

L L L L

LL LL

16


EyeType SCE2

•Single Leg Sling•Double Leg Sling•Triple Leg Sling•Quadruple Leg Sling

Eye Type Single Leg Sling


(t)

Chain Diameter(mm)



Code

S-HM-HM S-HM-HTS S-HM-HJ S-HM-HK S-HM-HQ *S-HM-HH S-HTS-HTS *S-HTS-HH

1.1 φ6（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 1.8 2.0 2.0 2.1 2.1 1.7 2.1 1.9

1.5 φ7（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 2.4 2.9 2.9 3.0 2.9 2.5 3.3 3.0

2.0 φ8（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 3.1 3.4 3.6 3.6 3.5 3.1 3.7 3.4

3.2 φ10（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 5.1 5.8 5.8 6.1 6.0 5.2 6.5 5.9

5.2 φ13（×1） Reach: L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Weight 10.7 12.1 12.1 12.8 11.9 11.4 13.5 12.8

8.0 φ16（×1） Reach: L 2.5 2.5 2.5 - 2.5 2.5 2.5 2.5 Weight 21.2 24.4 24.2 - 23.7 21.9 27.0 25.1

12.5 φ20（×1） Reach: L 3.0 3.0 - - 3.0 3.0 3.0 3.0 Weight 41.2 45.4 - - 42.6 41.1 49.6 45.3

Eye Type Double Leg Sling


(t) θ=60°

Chain Diameter(mm)



Code

D-HM-HTS D-HM-HJ D-HM-HK D-HM-HQ D-HM-OO

1.7 φ6（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 3.6 3.7 3.8 3.9 2.7

2.4 φ7（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 5.6 5.7 5.9 5.6 3.9

3.2 φ8（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 6.6 6.8 7.0 6.8 5.1

5.1 φ10（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.1 11.3 11.6 11.5 8.2

8.0 φ13（×2） Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 23.5 23.5 24.3 23.1 17.7

12.5 φ16（×2） Reach: L 2.5 2.5 - 2.5 2.5 Weight 46.6 47.4 - 45.2 36.5

20.0 φ20（×2） Reach: L 3.0 - - 3.0 3.0 Weight 86.5 - - 80.9 65.7


S-HM-HM S-HM-HTS S-HM-HJ S-HM-HK S-HM-HQ S-HM-HH* S-HTS-HTS S-HTS-HH*

D-HM-HTS D-HM-HJ D-HM-HK D-HM-HQ D-HM-OO

LLLLLL L L

LLLLL

A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.

17

Eye Type Triple Leg Sling


(t) θ=60°

Chain Diameter(mm)



Code

T-HM-HTS T-HM-HJ T-HM-HK T-HM-HQ

2.4 φ6（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 5.7 5.8 6.0 6.1

3.2 φ7（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 8.5 8.9 9.2 8.8

5.0 φ8（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 10.7 10.8 11.0 10.9

8.0 φ10（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 17.9 18.2 18.7 18.5

12.5 φ13（×3） Reach: L 2.0 2.0 2.0 2.0 Weight 36.8 37.7 38.9 36.2

20.0 φ16（×3） Reach: L 2.5 2.5 - 2.5 Weight 75.5 74.8 - 71.5

Eye Type Quadruple Leg Sling


(t) θ=60°

Chain Diameter(mm)



Code

Q-HM-HTS Q-HM-HJ Q-HM-HK Q-HM-HQ Q-HM-OO

2.4 φ6（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 7.3 7.4 7.7 7.8 5.5

3.2 φ7（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 10.9 11.4 11.8 11.3 7.7

5.0 φ8（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 13.4 13.6 13.9 13.7 10.2

8.0 φ10（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 22.4 22.8 23.5 23.2 16.3

12.5 φ13（×4） Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 46.5 47.7 49.3 45.7 35.5

20.0 φ16（×4） Reach: L 2.5 2.5 - 2.5 2.5 Weight 95.8 94.9 - 90.5 73.1

Q-HM-HTS Q-HM-HJ Q-HM-HK Q-HM-HQ Q-HM-OO

T-HM-HTS T-HM-HJ T-HM-HK T-HM-HQ

L

L L L L

LLLL

•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.

18


(HMS)

Master Link with Sub Links HMS•Triple Leg Sling•Quadruple Leg Sling•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.

EyeType

SCE2



(t) θ=60°

Chain Diameter(mm)



Code

T-HMS-HTS T-HMS-HJ T-HMS-HK T-HMS-HQ

2.6 φ6（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 6.0 6.1 6.3 6.4

3.2 φ7（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 8.5 8.9 9.1 8.7

4.2 φ8（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 10.5 10.9 11.1 10.8

6.4 φ10（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 17.2 17.5 18.0 17.8

10.4 φ13（×3） Reach: L 2.0 2.0 2.0 2.0 Weight 35.6 36.5 37.7 35.0

16.0 φ16（×3） Reach: L 2.5 2.5 - 2.5 Weight 70.6 69.9 - 68.5

25.0 φ20（×3） Reach: L 3.0 - - 3.0 Weight 134.9 - - 126.5



(t) θ=60°

Chain Diameter(mm)



Code

Q-HMS-HTS Q-HMS-HJ Q-HMS-HK Q-HMS-HQ

2.6 φ6（×4） Reach: L 1.5 1.5 1.5 1.5 Weight 7.6 7.7 8.0 8.1

3.2 φ7（×4） Reach: L 1.5 1.5 1.5 1.5 Weight 10.9 11.4 11.8 11.2

4.2 φ8（×4） Reach: L 1.5 1.5 1.5 1.5 Weight 13.3 13.7 14.0 13.6

6.4 φ10（×4） Reach: L 1.5 1.5 1.5 1.5 Weight 21.7 22.1 22.8 22.5

10.4 φ13（×4） Reach: L 2.0 2.0 2.0 2.0 Weight 45.3 46.5 48.1 44.5

16.0 φ16（×4） Reach: L 2.5 2.5 - 2.5 Weight 90.9 90.0 - 88.1

25.0 φ20（×4） Reach: L 3.0 - - 3.0 Weight 172.3 - - 161.1

T-HMS-HTS T-HMS-HJ T-HMS-HK T-HMS-HQ

Q-HMS-HTS Q-HMS-HJ Q-HMS-HK Q-HMS-HQ

L

L

L

L

L

L

L

L

19

Constituent Components Reference Example

Clevis Type Constituent Components The case of ø7 mm chains

• For single and double leg slings, use components that are appropriate for the chain size that is being used.• *1: For triple (and quadruple) slings, use Clevis Master Link VD (together with Chain Pins) for chain diameters that are one size higher.

• For single leg slings, use components that are appropriate for the W.L.L. (Working Load Limit) of the link chain that is being used.• *2: For double leg slings, only the Master Links should use components for working load limits that are one level higher.• *3: For quadruple (and triple) leg slings, use Master Links for working load limits that are two levels higher, and use Hi-couplings (for the Sub Links) for working load limits that are one level higher.• In the situation of using the Large-sized Master Link HL/HLD and the Master Link HMS, because the constituent components will be different, contact your Kito dealer for more details.

k i t o f p i n a r e p a c k e d t o g e t h e r w i t h a l l t h e fi t t i n g s .

Single Leg SlingS-VE-VSS

Double Leg SlingD-VD-VSS

Triple Leg Sling/Quadruple Leg SlingT-VD-VSS/Q-VD-VSS

7 mm Clevis Master Link VE (VE2070)

7 mm kit of pin VP (VP2070K)

7 mm kit of pin VP (VP2070)

7 mm Sling Hook VSL (VSL3070)

7 mm Link Chain (SV2070)

6/7 mm Master Link HM (HM20706)

7 mm Hi-coupling HC (HC3070)


7 mm Sling Hook HTL (HTL3080)


6/7/8 mm Master Link HM (HM20807) *2





Eye Type Constituent Components The case of ø7 mm chains

Single Leg SlingS-HM-HTS

Double Leg SlingD-HM-HTS

Triple Leg Sling/Quadruple Leg SlingT-HM-HTS/Q-HM-HTS

7/8/10 mm Master Link HM (HM21008) *3





8 mm Hi-coupling HC (HC3080) *3

6/7 mm Clevis Master Link VD (VD20706)





7/8 mm Clevis Master Link VD (VD20807) *1






7 mm Dual Connector VB (VB2070)

7 mm Single Connector VA (VA2070)

Kito Sling Tag Kito Sling TagKito Sling Tag

Kito Sling Tag Kito Sling Tag

Kito Sling Tag

20

Large Master Link HL/HLD Specifications Table

Hi-coupling Combinations for use with the Large Master Link HL/HLD

1.11.51.72.03.25.08.011.5

1.11.52

3.258

11.51.72

3.258

11.52

3.258

11.52

3.258

11.5

ø6ø7ø8ø10ø13ø16ø20ø6ø7ø8ø10ø13ø16ø6ø7ø8ø10ø13ø6ø7ø8ø10ø13

HL020HL020HL020HL030HL050

HLD080HLD115HL020HL020HL030HL050

HLD080HLD115HL020HL030HL050


HLD080HLD115

HC3080HC3080HC3080HC3100HC3130HC3160HC3200

HC3080x2HC3080x2HC3080x2HC3100x2HC3160x2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2

HC3060HC3070－－－－－

HC3060x2HC3070x2－－

HC3130x2HC3160x2HC3060X3HC3070X3HC3080X3HC3100X3HC3130X3HC3060X4HC3070X4HC3080X4HC3100X4HC3130X4

ø6ø7-

ø8ø10ø13ø16ø20

--

ø6ø7ø8ø10ø13ø16

---

ø6ø7ø8ø10ø13


(t)


(t)Chain Diameter

(mm)

Singleleg

Doublelegs

Triplelegs

Quadruplelegs

Single leg

Master Link Hi-coupling Referencediagram

S D T,Q

Chain Diameter (mm)

The example photograph mentioned above uses all HLD080.

Dimensions (mm) Mass(weight)

(kg)dapCode

1.2

1.62.18.09.8

17

20233640

t

13

1619.528.533.5

112

112112180180

225

225225340340

HL020

HL030HL050

HLD080HLD115

a

d

p t

Large Master Link for Use on Work Sites with Large Cranes!The link’s large width makes it suitable for use with various types of large-sized cranes, tower cranes, and wire rope hoists.

Working Load Limit

1.1t

11.5t

HL020

HLD115

•Chain Diameter S.D.TQ mean number of chain. S: Single sling / D: Double sling / TQ: Triple or Quadraple sling

•Large Master Link HL/HLD Specifications Table •Hi-coupling Combinations for use with the Large Master Link HL/HLD

Large Master Link HL/HLD

180mm

The HLD type hasa large width.

Double legs Triple legs Quadruple legs

In the case of assembling set products

using the Large Master Link HL/HLD,

use in combination with Hi-couplings

as described in the contents of the

table at right.

Reference example

21

Large Master Link HL/HLD Specifications Table

Hi-coupling Combinations for use with the Large Master Link HL/HLD

1.11.51.72.03.25.08.0

11.5

1.11.52

3.258

11.51.72

3.258

11.52

3.258

11.52

3.258

11.5

ø6ø7ø8

ø10ø13ø16ø20ø6ø7ø8

ø10ø13ø16ø6ø7ø8

ø10ø13ø6ø7ø8

ø10ø13

HL020HL020HL020HL030HL050

HLD080HLD115HL020HL020HL030HL050



HLD080HLD115

HC3080HC3080HC3080HC3100HC3130HC3160HC3200

HC3080x2HC3080x2HC3080x2HC3100x2HC3160x2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2

HC3060HC3070－－－－－

HC3060x2HC3070x2－－

HC3130x2HC3160x2HC3060X3HC3070X3HC3080X3HC3100X3HC3130X3HC3060X4HC3070X4HC3080X4HC3100X4HC3130X4

ø6ø7-

ø8ø10ø13ø16ø20

--

ø6ø7ø8

ø10ø13ø16

---

ø6ø7ø8

ø10ø13


(t)


(t)Chain Diameter

(mm)

Singleleg

Doublelegs

Triplelegs

Quadruplelegs

Single leg

Master Link Hi-coupling Referencediagram

S D T,Q

Chain Diameter (mm)

The example photograph mentioned above uses all HLD080.

Dimensions (mm) Mass(weight)

(kg)dapCode

1.2

1.62.18.09.8

17

20233640

t

13

1619.528.533.5

112

112112180180

225

225225340340

HL020

HL030HL050

HLD080HLD115

a

d

p t

Large Master Link for Use on Work Sites with Large Cranes!The link’s large width makes it suitable for use with various types of large-sized cranes, tower cranes, and wire rope hoists.

Working Load Limit

1.1t

11.5t

HL020

HLD115

•Chain Diameter S.D.TQ mean number of chain. S: Single sling / D: Double sling / TQ: Triple or Quadraple sling

•Large Master Link HL/HLD Specifications Table •Hi-coupling Combinations for use with the Large Master Link HL/HLD

Large Master Link HL/HLD

180mm

The HLD type hasa large width.

Double legs Triple legs Quadruple legs

In the case of assembling set products

using the Large Master Link HL/HLD,

use in combination with Hi-couplings

as described in the contents of the

table at right.

Reference example

22

Eye Type Single Leg Sling


(t)

Chain Diameter(mm)



Code

S-HL-HL S-HL-HTS S-HL-HJ S-HL-HK S-HL-HQ S-HL-HH*1.1 φ6（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5

Weight 3.7 2.9 2.9 3.0 3.1 2.7

1.5 φ7（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 Weight 4.1 3.7 3.8 3.9 3.8 3.3

2.0 φ8（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 Weight 4.1 3.9 4.0 4.1 4.0 3.5

3.2 φ10（×1） Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 Weight 6.1 6.2 6.3 6.5 6.4 5.6

5.0 φ13（×1） Reach: L 2.0 2.0 2.0 2.0 2.0 2.0 Weight 11.1 12.3 12.6 13.0 12.1 11.6

S-HLD-HLD S-HLD-HTS S-HLD-HJ - S-HLD-HQ S-HLD-HH

8.0 φ16（×1） Reach: L 2.5 2.5 2.5 - 2.5 2.5 Weight 29.7 28.6 28.4 - 27.9 26.8

11.5 φ20（×1） Reach: L 3.0 3.0 - - 3.0 3.0 Weight 47.2 49.0 - - 46.2 43.5

Eye Type Double Leg Sling


(t) θ=60°

Chain Diameter(mm)



Code

D-HL-HTS D-HL-HJ D-HL-HK D-HL-HQ D-HL-OO

1.7 φ6（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 4.7 4.6 4.8 4.9 3.7

2.0 φ7（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 6.2 6.5 6.6 6.4 4.6

3.2 φ8（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 7.0 7.2 7.4 7.2 5.5

5.0 φ10（×2） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.3 11.5 11.9 11.7 8.3

D-HLD-HTS D-HLD-HJ D-HLD-HK D-HLD-HQ D-HLD-OO

8.0 φ13（×2） Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 30.3 30.3 31.1 29.9 24.5

11.5 φ16（×2） Reach: L 2.5 2.5 - 2.5 2.5 Weight 55.6 55.2 - 54.2 44.9


S-HL-HL/S-HLD-HLD S-HL-HTS/S-HLD-HTS S-HL-HJ/S-HLD-HJ S-HL-HK S-HL-HQ/S-HLD-HQ S-HL-HH/S-HLD-HH*

D-HL-HTS/D-HLD-HTS D-HL-HJ/D-HLD-HJ D-HL-HK/D-HLD-HK D-HL-HQ/D-HLD-HQ D-HL-OO/D-HLD-OO

In the case of 6mm and 7mm chain diameter single sling set products, two Hi-couplings should be used for connecting the Master Link to the Hi-coupling.

In the case of 6mm, 7mm, 13mm, and 16mm chain diameter double sling standard set products, two Hi-couplings should be used for connecting the Master Link to the Hi-coupling.

1 or 2 upper size

1 or 2 upper size

6mm and 7mm chain

6mm, 7mm, 13mm, and 16mm chain

LLLLLL

LLLLL


(HL/HLD)

Master Link HL/HLD•Single Leg Sling•Double Leg Sling•Triple Leg Sling•Quadruple Leg Sling•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.

EyeType

SCE2

23



(t) θ=60°

Chain Diameter(mm)



Code

T-HL-HTS T-HL-HJ T-HL-HK T-HL-HQ

2.0 φ6（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 6.2 6.1 6.4 6.6

3.2 φ7（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 8.9 9.3 9.4 9.2

5.0 φ8（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 10.8 11.2 11.4 11.0

T-HLD-HTS T-HLD-HJ T-HLD-HK T-HLD-HQ

8.0 φ10（×3） Reach: L 1.5 1.5 1.5 1.5 Weight 23.9 24.2 24.7 24.5

11.5 φ13（×3） Reach: L 2.0 2.0 2.0 2.0 Weight 43.7 44.6 45.8 43.1



(t) θ=60°

Chain Diameter(mm)



Code

Q-HL-HTS Q-HL-HJ Q-HL-HK Q-HL-HQ Q-HL-OO

2.0 φ6（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 7.7 7.6 7.9 8.2 5.8

3.2 φ7（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.3 11.7 11.9 11.6 8.0

5.0 φ8（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 13.4 13.9 14.2 13.7 10.3

Q-HLD-HTS Q-HLD-HJ Q-HLD-HK Q-HLD-HQ Q-HLD-OO

8.0 φ10（×4） Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 28.0 28.4 29.1 28.8 21.9

11.5 φ13（×4） Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 52.9 54.1 55.7 52.1 41.9

Q-HL-HTS/Q-HLD-HTS Q-HL-HJ/Q-HLD-HJ Q-HL-HK/Q-HLD-HK Q-HL-HQ/Q-HLD-HQ Q-HL-OO/Q-HLD-OO

T-HL-HTS/T-HLD-HTS T-HL-HJ/T-HLD-HJ T-HL-HK/T-HLD-HK T-HL-HQ/T-HLD-HQ

L

L L L L

LLLL

26

Reference Examples of Special Specification Systems Introduction to High Versatility Balance Beams

Standard Type Balance Beams These are ideal for lifting long objects in locations where the height is restricted. They allow work that makes effective use of the space.

Distance Bar Type Balance Beams These are perfect for lifting long objects. They realize stable and well-balanced lifting.

Balance Beams for Plastic Containers These are ideal for moving plastic containers. Because the levers can be opened and closed by one-hand operation, it will be possible to control the load while keeping hold of the push button unit.

Balance Beams for Flexible Containers These are perfect for lifting flexible containers The containers are firmly held by the four loops, realizing stable lifting work.

Kito offers a variety of systems that are created by combining Kito Chain Sling 100 products with Kito’s motorized and manual hoists and cranes.Special specifications are realized as order-made products.

Overhead Crane(Single Girder)

Overhead Crane(Double Girder)

Jib Crane Pillar Type(JP Type)

Jib Crane Wall Type(JW Type)

Jib Crane Wall Type(LJW Type)

Light Crane(Steel Rail)

Light Crane(Aluminum Rail)

Low-head Crane Gantry Crane

Electric Chain Hoist ER2/EQ/ED(60kg to 20t)

Wire Rope Hoist(1/2t to 60t)

Chain Hoist M3/CX(250kg to 50t)

Products are order-made to match applications. (Several examples are introduced below)

Each Typeof Crane

Each Typeof Hoist

Kito Chain Sling 100Special Specifications

For Coils

For Train Wheels

For Coils

For Balance Beams/Distance Bars

For Rails

For Balance Beams/Standard Types

For Plastic Containers

For Pipes

For Short Headroom Types

For Pallets

In the situation where you wish to transport unique work pieces with high efficiency using dedicated slings,

Kito Chain Sling 100 “Special Specification” products will support every requirement.

S

S

S

S

L

S

L

27

Reference Examples of Special Specification Systems Introduction to High Versatility Balance Beams

Standard Type Balance Beams These are ideal for lifting long objects in locations where the height is restricted. They allow work that makes effective use of the space.

Distance Bar Type Balance Beams These are perfect for lifting long objects. They realize stable and well-balanced lifting.

Balance Beams for Plastic Containers These are ideal for moving plastic containers. Because the levers can be opened and closed by one-hand operation, it will be possible to control the load while keeping hold of the push button unit.

Balance Beams for Flexible Containers These are perfect for lifting flexible containers The containers are firmly held by the four loops, realizing stable lifting work.

Kito offers a variety of systems that are created by combining Kito Chain Sling 100 products with Kito’s motorized and manual hoists and cranes.Special specifications are realized as order-made products.

Overhead Crane(Single Girder)

Overhead Crane(Double Girder)

Jib Crane Pillar Type(JP Type)

Jib Crane Wall Type(JW Type)

Jib Crane Wall Type(LJW Type)

Light Crane(Steel Rail)

Light Crane(Aluminum Rail)

Low-head Crane Gantry Crane

Electric Chain Hoist ER2/EQ/ED(60kg to 20t)

Wire Rope Hoist(1/2t to 60t)

Chain Hoist M3/CX(250kg to 50t)

Products are order-made to match applications. (Several examples are introduced below)

Each Typeof Crane

Each Typeof Hoist

Kito Chain Sling 100Special Specifications

For Coils

For Train Wheels

For Coils

For Balance Beams/Distance Bars

For Rails

For Balance Beams/Standard Types

For Plastic Containers

For Pipes

For Short Headroom Types

For Pallets

In the situation where you wish to transport unique work pieces with high efficiency using dedicated slings,

Kito Chain Sling 100 “Special Specification” products will support every requirement.

S

S

S

S

L

S

L

28

medicine


Strictly Avoid OverloadingKito Chain Sling 100 products have Kito Sling Tags attached. Be sure to use the product within the range of the working load limits displayed on the Kito Sling Tag. (Refer to page 3.)

Changes in the Working Load Limit according to the Angle of Loading

The working load limits will change according to the angle of loading. Be certain to confirm the actual angle of loading with the angle of loading and working load limits described on the Kito Safety Tag.

Minimizing the Impact Loading Impact loading will lead to unexpected overloading. Take particular care to avoid shock when the loads are lifted off and returned to the ground.

Measures when Loads have Sharp Edges For loads that have sharper edges, an increasingly unreasonable force will be applied to the chain slings, affecting their strength. Apply pads to protect the load and chains, and use chains considering the safety factor margin.

Chain Twisting and TanglingVerify that the chain is not twisted, tangled, or tangled with the sling components prior to use.

When the Load is Out of BalanceSuspend loads in such a way that the loading is applied equally to all the chain slings. In cases where the form of the load makes it difficult to suspend with equal loading on each chain, select the slings while considering the chain side that bears the heaviest load as the reference.

Apply Loads to the Center of the HookBe certain to suspend the load from the center of the hook (deepest part). Avoid suspending loads from the hook tip.

Variations in Working Load Limits under High Temperatures

In the situation of using chain slings in high temperature environments, or in cases where chain slings are used under normal temperatures after they have been used in high temperature environments, the working load limits should be reduced according to the corresponding temperature in the table below.

Resistance to ChemicalsThese products cannot be used in environments that are subject to chemicals.

Leaving Loads in a Suspended Condition

Do not leave loads in a suspended condition for long periods.


To allow safe use of chain slings, when using under the following conditions the working load limits should be reduced to 80% or less of the values given in the working load limit list.(1) Work that is carried out with high frequency or when the working load is applied continuously(2) Work in which vibration is applied continuously(3) Usage by incorporation in an automatic line

Chain Sling Usage Limits Observe the usage limitations due to wear and elongation, and do not use products that have become deformed or cracked.

BULLETIN NO. CSGE1508-04

1

Supporting ideal lifting work with outstanding quality

Printed in japan 29.03(SE.H)CSGE04-006

Distributed by:

•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •In case you intend to use our products for special purposes, consult us in advance.•In case you intend to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.

KITO CORPORATIONSHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com

1 8

9

10

11

12

2

3

4

5

6

7

Precautions for Use Recommendationsfor Correct Equipment

Administration

Inspection is the first step of safety.

In order to use the equipment

safety, carry out the daily

inspections, monthly inspections

and periodic inspections.

Daily and Periodic InspectionsDaily inspections should be implemented by the operator before using the chain slings for work. In addition, periodic inspections should be implemented by the persons determined by the business entity.

Chain Sling StorageStore chain slings in appropriate locations under favorable environments where they will not rust.

Chain Sling Record AdministrationThe administration of inspection records is important for the safe use of chain slings.

Kito has prepared a “Periodic Inspection Standards Manual” which describes the inspection standards and periodic inspection check sheets.

•This catalog is intended to allow the use of Kito Chain Sling 100 products at working load limits with a safety factor of 5:1.

•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another

1

2

3

Working load limit (%)Temperature, t (°C)

-40 < t ≤ 100100 < t ≤ 260200 < t ≤ 300300 < t ≤ 350350 < t ≤ 400

Over 400

10090756560

Usage not allowed

inspection is the ﬁrst step of safety. kito chain sling

Documents