inosplit - inotec gmbh

1

inoSPLIT Waste water systems

INOTEC GmbHWe make your construction site easier!

Waste water systems for eco-friendly cleaning of painters’ and plasterers’ tools and for treating dirty water in the workshop.

2

Waste water systems make your work easier!

3

Benefits at a glance

• Compact design

• Requires little space

• Simple operation

• Integrated washbasin

• Integrated roller washing device (roller size: 100 x 300 mm)

• System can be moved using 4 castors

• Low fresh water consumption

Scope of deliveryinoSPLIT B50Item no. 10041734

• Housing made from polypropylene• Washbasin• Industrial water reservoir• Roller washing device• 4 castors• Water spraying pistol with 2 m hose• Agitator and pump integrated• Power supply cable for agitator and pump• Washing basket• 1 x filter mat• 1 x filter fleece• 1 x splitting agent, 25 kg• Operating instructions

Accessories page 6

inoSPLIT B50The small, compact waste water system for tool cleaning and waste water treatment

Technical data

Operating voltage: 230 V / 50 Hz

Volumetric capacity: 50 l

Dimensions 650 x 630 x(D x W x H): 1,450 mm

Weight: 35 kg

The inoSPLIT B50 serves to clean painters’ and plasterers’ tools and to treat dirty water to make it safe for disposal.

The treated water is collected in a built-in vessel and can be reused for other cleaning processes thanks to a pump system.

The accumulating paint residue remains in the filter drawer and can subsequently be disposed of once dry in commercial waste similar to domestic waste.

Fresh water consumption is considerably reduced as the treated dirty water is reused.

4


• Compact design





• System can be moved using 4 castors



• Housing made from polypropylene• Washbasin• Industrial water reservoir• Roller washing device• 4 castors• Water spraying pistol with 2 m hose• Agitator and pump integrated• Power supply cable for agitator and pump• Washing basket• 1 x filter mat• 1 x filter fleece• 1 x splitting agent, 25 kg• Operating instructions

Accessories page 6

inoSPLIT B100The compact waste water system for tool cleaning and waste water treatment

Technical data



Dimensions 700 x 1,000 x (D x W x H): 1,350 mm

Weight: 55 kg




Fresh water consumption is considerably reduced as the treat-ed dirty water is reused.

5


• Compact design






• Additional drawer compartment, storage compartment and large dripping area


• Housing made from polypropylene• Washbasin• Industrial water reservoir• Roller washing device• Water spraying pistol with 2 m hose• Agitator and pump integrated• Power supply cable for agitator and pump• Washing basket• 1 x filter mat• 1 x filter fleece• 1 x splitting agent, 25 kg• Operating instructions

Accessories page 6

inoSPLIT B150The compact waste water system for tool cleaning and waste water treatment

Technical data



Dimensions 700 x 1,500 x (D x W x H): 1,450 mm

Weight: 75 kg




Fresh water consumption is considerably reduced as the treated dirty water is reused.

6

Technical data

inoSPLIT B50 inoSPLIT B100 inoSPLIT B150

Operating voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz

Volumetric capacity 50 l 100 l 100 l

Dimensions: 650 x 630 x 700 x 1,000 x 700 x 1,500 x (L x W x H) 1,450 mm 1,350 mm 1,450 mm

Weight 35 kg 55 kg 75 kg

AccessoriesSplitting agentResponse separating agent up to a pH value of 10, PU = 25 kg bag (Price per kilo: €4.50)

Item no.

10041634

Filter fleece Item no.

10040792

Filter mat Item no.

10040793

Odour trap for waste water systemsPrevents the build-up of bacteria Packaging unit: 1 litre canister(sufficient for 1,000 litres of industrial water)

Item no.

10039482

7

ServiceServices from INOTEC

Silo technology functional and return testing

• Visual inspection

• Checklist-based inspection

• Emptying residual quantities in agreement with the customer

• Checking and, if necessary, replacing mechanical and electrical components

• Checking and, if necessary, replacing the water fitting

• Drawing up a test log and, if necessary, DGUV V3 testing

• Testing mobile equipment pursuant to the Ordinance

on Industrial Health and Safety VDE 0701-0702

• Extensive visual inspection

• Measuring and determining the permissible values

• Separating work equipment with safety defects and discussing how to proceed with the customer

• Attaching the inspection plate if the inspection has been passed

• Drawing up a legally binding test report

• Defining the inspection intervals with the customer

• Making an inventory of the work equipment, if requested

• Customer fault reporting

• Providing support over the phone during the troubleshooting process, or if necessary deploying a service technician

• Service technician travels to the construction site with the service vehicle

• Rectifying faults, if this can be done on the construction site

• Creating assembly certificates with the following information: machine / travel time / kilometres / fault description /

record of the spare parts / date / signature

Silo maintenance

Electrotechnical BGV A3 testing (DGUV V3)

Construction site applications

8

• Visual inspection and cleaning• Resetting / adjusting, lubricating and preserving• Replenishing or replacing the operating fluids• Replacing wearing parts (e.g. filters, seals, etc.) as scheduled,

if their expected service life is clearly sooner than the next maintenance interval.

• Recording, procuring and replacing wearing parts• Should it be determined during the maintenance process that

parts are defective, the customer is contacted and an agreement reached on how to proceed. If the customer would like a repair, they are sent a cost estimate. The parts are then procured and replaced accordingly.

• Finally, functional testing and, upon customer request, DGUV V3 testing are performed.

• Extensive visual inspection• Testing to ensure safe working conditions• Visual inspection pursuant to BGV D 15 on devices up to 500 bar• Electrically testing the devices pursuant to VDE 701-702• Making an inventory of the work equipment, if requested

• Checking• Recording the parts to be replaced• Sending a cost estimate to the customerIf the customer decides to have the repair work performed:• Procuring the parts• Replacing the parts • Functional testing and DGUV V3 testing, if necessary If the customer decides not to have the repair work performed:• Assuming the costs incurred with the cost estimate

Maintenance of third-party and our own devices

Repairs

UVV testing

• Explaining the machine technology• Offering advice on potential uses and applications• Explaining the various machine functions• Safety notices• Practical tips• Maintenance notices• Rectifying faults

Training courses and commissioning

Machinery rental fleetDon’t buy, rent!

Continuousmixers

Delivery pumps

Smallsilo*

* with integrated 400 V continuous mixer and 400 V delivery pump

Airless devices

Mixing pumps

Silocontinuous mixers

floorFloor sanders

Don’t buy, rent!

Do you need a mixing pump or another machine for one-off

use on your construction site?Would you like to purchase a

machine but check the efficiency and performance

first?

Then you’re in the right place with the INOTEC machine rental fleet !

Give us a call.We would be happy to provide you with a quote.

10

LocationsYour sales partner (English language)

INOTEC GmbH(Headquarter)Markus Fechtig (Export Sales Manager)Daimlerstraße 9-1179761 Waldshut-TiengenGermanyPhone +49 160 / 9492 5237Fax +49 7741 / 6805 665E-Mail: [email protected]

Wherever you are, we’re there, too.

INOTEC GmbH • Daimlerstraße 9-11 • D-79761 Waldshut-Tiengen • Tel.: +49 77 41 / 68 05-0 • www.inotec-gmbh.com

Compressed air / compressors

Delivery pumps Mixing pumps Mixers Delivery systems

OWC technology

Silo technology

Airless devices Cutters Grinders One-handed guns

Power tools / electrical appliances

Waste watersystems

Floorprocessing

Product range

Accessories &spare parts

Heaters / air dehumidifiers / high-pressure

cleaners

inosplit - inotec gmbh

Documents