independant®

Independant®

FOR FLEXIBLE EQUIPMENT POSITIONING AND

OPTIMAL SPACE UTILIZATION IN OPERATING ROOM

AND INTENSIVE CARE UNIT

Ceiling-mounting systems

Independant®

The idea of using ceiling mounts that can be easily swiveled in place to have medical equipment or gases readily available

for patient treatment or care has long proved to be a complete success. This is not surprising in light of the benefits: flexible

positioning and optimal space utilization in the OR or ICU are obvious advantages, but – no less important – hygiene and

safety requirements must be satisfied as well. Yet there is still more to this concept: clear assignment of the various units,

elimination of cable clutter and, above all, the unrestricted movement of all components in the space around the place of use.

KLS Martin “pendants” are used in surgery, endoscopy, anesthesia, intensive care or simply as monitor supports. For all these

purposes, we offer perfect, customized solutions across a wide load range – from 30 to almost 1,000 kg.

The new generation of Independant® ceiling mountsfeatures a completely novel service head. The modu-lar design of electrical and gas modules, trays/plat-forms, drawers and infusion rails means superioruser-friendliness, facilitating the system’s use in the operating room or intensive care unit.

The entire service head is made up of the basiccomponents described below.

The base represents the supporting basic element. It is available in five different length configurations.

Gas, power supply and data modules are availablefor lateral installation. They can be optionally posi-tioned more to the front or the back for increasedclarity and ease of use. For each module, we tookcare to ensure a high integration density of gas outlets, power outlets and manometers. Besides, our focus was on a space- and weight-saving arran-gement of all components. The resulting volume reduction means considerably more freedom ofmovement around the workplace. All modules canbe fitted to either side of the base at the customer’soption. Thus, user preferences can be taken intoconsideration right at the planning stage.

The multifunction rack, which is available in threedifferent lengths, enables you to install various components for customized configuration. Trays anddrawers can be infinitely adjusted along their verti-cal support and can be seamlessly adapted to thedimensions of the terminal units for which they areintended. This again contributes to superior work-place economy and ergonomics. The rack can evenbe fitted with trays both at the front and rear foroptimized space utilization and balanced load dis-tribution.

In a nutshell, the rack can be used for platformtrays, drawers, flat-screen monitor supports andinfusion modules.

Introduction

Infusion module

Trays /Drawers

Multifunction rack

Base

Electromodule/Data module

Gas module

Trays are available in different designs and widths,with buttons for arm control and optional drawersunderneath. The handles are made of soft and hardplastic, thus providing integrated impact protection.Depending on their intended use and the space available, trays and drawers can be ergonomicallyinstalled either at the front or the rear. Integratedcable storage compartments facilitate cable manage-ment, keeping excess cable lengths out of the way.These storage spaces are closed off by a rubber sealing lip to ensure that hygiene requirements aremet as well.

The infusion modules are also available in variousdesigns and with hooks for up to four infusion bottles. They can be easily fitted – or even retro-fitted – to the multifunction rack.

3

Extensions

Independant®

There are a number of highly useful add-ons with which

you can round off your versatile equipment platform.

Flat panel monitor supportThe TFT support is installed on the multifunction rack.Height-adjustable, gas-pressurized spring arms plus an arm whose height can be conveniently fixed ensure perfect inte-gration into your workplace configuration.

Keyboard and typing supportThis swivel support meets all the ergonomic requirements associated with an OR workplace, thus neatly rounding offan impressive range of options.

SwingoM6 equipment trolleyDuring operations, it is often necessary to use equip-ment trolleys with medical devices required in addi-tion to the units installed on the platforms of theceiling-mounted pendant systems.

The SwingoM6 equipment trolleyis ideal for these purposes, notleast because it features a pa-tented locking mechanism thatallows fast and easy dockingto the multifunction rack. The trolley is available in diffe-rent designs, with an operatinghandle for convenient disconnec-tion of the trolley from the rackafter use.

The Suspension Systems

With the exception of the Independant® 30 variant, the redesigned service head can be

used in conjunction with the following suspension systems:

Technical data related to the service head and suspension systems

Service head

Base (length) min. 272 mm, max. 1,080 mm

Multifunction rack: lengths 475 / 975 / 1,475 mm, stainless steel

Multifunction rack: load capacity max. 168 kg

Cable management Storage space: 2 x 2,600 cm3 per tray

Operation

Pneumatic brake buttons min. 5 bar; max. 7 bar

Motor button Up/Down for 230/120 V AC; 50/60 Hz; 1/3 HP / 10 A

Own weight min. 7.3 kg; max. 70.3 kg

Hygiene report/certificate SMP 8205021011

Usability certificate USE-LAB 02/2006/01

Marks of conformity CE; UL-recognized component

Medical device class IIb

Independant® 30

Independant® 100

Independant® 200

Independant® 300

Independant® 500

Small monitor or surgical suspension system, either for wall mounting or ceiling mounting in combination with a marLux® operating light. Max. loadingcapacity (useful load): 25 kg (e.g. one CRT monitor or one HF unit). Alterna-tively, the pendant system can be fitted with a power supply box (electrobox).

Swivel ceiling mount, either with height-adjustable spring arm or with motorarm offering a maximum load-carrying capacity of 120 kg. Safe positioning guaranteed by pneumatic brakes.

Motorized swivel ceiling mount for a total load of up to 200 kg. Maximum useful load to be added: 90 kg. Large cable ducts for medical gases, elec-trical cables and data lines.

Universal heavy-duty suspension system for surgery, endoscopy, anesthesia and intensive care. Optionally available with single or tandem extension armoffering a large swiveling range. Pneumatic brakes ensure high position fidelity.

Heavy-duty suspension arm system for very high useful loads, with a total load-carrying capacity of nearly 1,000 kg.

5All models at a glance

Independant® 30

Electrical data*Nominal voltage 120/230 VNominal frequency 60/50 HzRated current max. 20/16 A per circuitMaximum number of electric circuits max. 4 circuits with four socket-outlets each* depending on customer-specific configuration

Own weightsIntermediate ceiling set (ceiling anchor plate with 3 tubes and threaded bolts) 35 kgInterface plate 30 kgFlanged tube (weight of running meter) 10.0 kg per meterExtension arm, 800 mm 10.1 kgSpring arm, 988 mm 16.8 kgService head, 170 mm, with platform 410 x 400 mm 12.5 kgElectrobox / Electrobox with 2 optional, single-part pump rods 7 kg / 17 kgMonitor/equipment support (C-arm, M-arm) 7 kg / 17 kgVario View adapter element, single, dual, three-part 4 kg / 10 kg / 14 kg

Total load-carrying capacity of Independant® suspension arm (corresponds to own weight of service head plus added/useful load)Extension arm, 800 mm 40 kg

Gas data* (media connections acc. to DIN 13620, Part 2)Compressed air 5 barTypes of gas oxygen, nitrous oxide* only ceiling-mounting versions; depending on customer-specific configuration

Spring equipmentSpring versions 8–16 kg, 15–32 kg, 25–40 kg

Maximum useful load capacity (with spring option and a spring load setting of 40 kg)Spring arm, 988 mm max. 40 kgElectrobox / Electrobox with 2 optional, single-part pump rods max. 33 kg / max. 23 kgMonitor/equipment support for 17-inch monitors (C-arm) max. 25 kgMonitor/equipment support for 20-inch monitors (M-arm) max. 33 kgVario View adapter element for 15-inch to 21-inch monitors, single, dual or three-part max. 36 kg / 30 kg / 26 kgService head, 170 mm, with platform 410 x 400 mm max. 20 kg

Noise level acc. to EN 793:1998 Sound energy limit of 30 dB(A) (EN ISO 3744) is not exceeded.

Classification acc. to EC Directive concerning medical devices dated 14 June 1993: 93/42/EEC:(I = without gas supply; IIb = with gas supply)Protection class: IEquipment type: BType of protection: covered design Ordinary appliance (closed unit without water ingress protection).

The suspension arm system is not intended for use in hazardous atmospheres. The suspension arm system is designed for continuous operation.

Applicable regulations / reference standardsEN 60601-1, UL 60601-1, EN 793:1998

Standard version certificationsThe product has been tested and certified by the VDE-Prüf- undZertifizierungsinstitut (EU ID no. 0366), Merianstr. 28, D-63069Offenbach (Germany). Use of VDE symbol permitted under marklicense.

EC conformityBoth the suspension arm system and the service heads comply with the provisions stipulated in the EU Directives 93/42/EEC(MDD) and 89/336/EEC (EMC Directive).

The suspension arm system is certified only for connection of thefollowing appliances: CE-marked KLS Martin service heads with alength of 413, 600 and 1025 mm.

The natural or legal person connecting the above devices to theKLS Martin suspension arm system in order to place them on themarket as a (total) system is required to draw up a declaration as specified in Article 12 of the EU Directive 93/42/EEC (MDD).The connection of other appliances requires a separate conformityassessment, as specified in the MDD.

Mounting the above devices to a suspension arm system otherthan those specified above requires Gebrüder Martin’s prior con-sent. A separate conformity assessment is required in any suchcase.

Combination with other medical devicesThe suspension arm system is intended for supporting terminalequipment made by other manufacturers. To ensure proper hand-ling, please refer to the appropriate user manual in each case.

CE 0297 – DQS – Deutsche Gesellschaft zur Zertifizierung vonManagementsystemen mbH, EC ID number: 0297

7Independant® 100

Electrical data*Nominal voltage 120/230 VNominal frequency 60/50 HzRated current max. 20/16 A per circuitMaximum number of electric circuits max. 4 circuits with four socket-outlets eachMaximum number of socket-outlets acc. to DIN 49440) 24Maximum number of potential equalization sockets acc. to DIN 42801) 24* depending on customer-specific configuration

Mechanical data* (load capacity)Service head, 420 mm / 600 mm max. 50 kgService head without drawers max. 50 kgService head with one drawer max. 40 kgService head with two drawers max. 30 kgDrawer max. 15 kgPump rod, single-part max. 30 kg Pump rod set, two-part max. 20 kgStandard rail max. 10 kgSwivel/tilt part max. 35 kgC-arm / M-arm max. 33 kg / max. 33 kgAdapter for operating light max. 35 kgKeyboard drawer for PC keyboard only* depending on customer-specific configuration

Total load-carrying capacity of Independant® suspension arms (corresponds to own weight of service head plus added/useful load in each case) – extract Motor arm, 700 mm 120 kgMotor arm, 1,000 mm 90 kgSpring arm, 1,000 mm 85 kgExtension arm, 800 mm / motor arm, 1,000 mm 90 kg600 / 700 mm 120 kg800 / 700 mm 120 kg1,000 / 700 mm 120 kg

Gas data* (media connections acc. to DIN 13620, Part 2)Compressed air 5 barCompressed-air supply for air motor 10 barTypes of gas oxygen, nitrous oxideVacuum; anesthetic gas evacuation (with label)* depending on customer-specific configuration

Noise level acc. to EN 793:1998Sound energy limit of 30 dB(A) (EN ISO 3744) is not exceeded.

Classification acc. to EC Directive concerning medical devices dated 14 June 1993: 93/42/EEC: (I = without gas supply; IIb = with gas supply)Protection class: IEquipment type: BType of protection: covered design Ordinary appliance (closed unit without water ingress protection).


For details concerning reference standards, certifications, EC Declarations of Conformity, CE-marking, etc., please refer to page 6.

Independant® 100

Independant® 200


Own weightsIntermediate ceiling set (ceiling anchor plate with 6 tubes and threaded bolts) 85 kgInterface plate 55 kgExtension arm (single-arm), with bearing, 600 mm 58 kgExtension arm (single-arm), with bearing, 800 mm 64 kgExtension arm (single-arm), with bearing, 1,000 mm 69 kgExtension arm (single-arm), with bearing, 1,200 mm 74 kgMotor arm (single-arm), with bearing, 750 mm 53 kgMotor arm (single-arm), with bearing, 1,000 mm 55 kgSpacer tube (bearing weight / weight of running meter) 15 kg / 7 kg per meter

Maximum loading capacity (useful load) Platform (without “max. load” label) max. 50 kgSwivel/tilt part max. 35 kgPump rod set, single-part max. 30 kg Pump rod set, two-part max. 20 kgStandard rail on pump rod set max. 10 kgDrawer max. 10 kgKeyboard drawer for PC keyboard only* depending on customer-specific configuration

Total load-carrying capacity of Independant® suspension arms (corresponds to own weight of service head plus added/useful load in each case) – extract Motor arm, 750 mm 200 kgMotor arm, 1,000 mm 150 kgExtension arm, 800 mm / motor arm, 750 mm 200 kg1,000 / 1,000 mm 150 kg1,200 / 1,000 mm 150 kg



Classification acc. to EC Directive concerning medical devices dated 14 June 1993: 93/42/EEC: (I = without gas supply; IIb = with gas supply)Protection class: IEquipment type: BType of protection: covered design Ordinary appliance (closed unit without water ingress protection). The suspension arm system is not

intended for use in hazardous atmospheres. The suspension arm system is designed for continuous operation. The height adjustment function of the motor arm is not intended for continuous operation. Keep activation time limited to max. three minutes and maintain a cooling-down phase of 30 minutes afterwards.


Independant® 200

9Independant® 300


Own weightsIntermediate ceiling set (ceiling anchor plate with 6 tubes and threaded bolts) 58 kgInterface plate (Single / Duo) 15.5 / 38.2 kgFlange 23.0 kgExtension arm (single-arm), with bearing, 600 / 800 / 1,000 / 1,200 mm long 14.0 kg / 17.0 kg / 20.5 kg / 24.0 kgSpacer tube (bearing weight / weight of running meter) 1 kg / 12 kg per meter

Maximum loading capacity (useful load)Platform, 500 x 470 mm (without label) max. 50 kgPlatform, 750 x 470 mm (without label) max. 35 kgSwivel/tilt part max. 35 kgPump rod set, single-part / two-part max. 30 kg / max. 20 kgStandard rail on pump rod set max. 10 kgDrawer max. 10 kgKeyboard drawer for PC keyboard only* depending on customer-specific configuration

Total load-carrying capacity of Independant® suspension arms (corresponds to own weight of service head plus added/useful load in each case)Extension arm, 600 mm 580 kgExtension arm, 800 mm 420 kgExtension arm, 1,000 mm 320 kgExtension arm, 1,200 mm 260 kg600 / 600 mm 260 kg600 / 800 mm 220 kg800 / 800 mm 180 kg1,000 / 600 mm 180 kg1,000 / 800 mm 150 kg1,000 / 1,000 mm 130 kg



Classification acc. to EC Directive concerning medical devices dated 14 June 1993: 93/42/EEC: (I = without gas supply; IIb = with gas supply)Protection class: IEquipment type: BType of protection: covered design Ordinary appliance (closed unit without water ingress protection). The suspension arm system is not inten-

ded for use in hazardous atmospheres. The suspension arm system is designed for continuous operation.


Independant® 300

Independant® 500


Own weightsIntermediate ceiling set (ceiling anchor plate with 6 tubes and threaded bolts) 85 kgInterface plate 55 kgExtension arm (single-arm), with bearing, 600 / 800 / 1,000 / 1,200 mm long 35 kg / 40 kg / 46 kg / 51 kgSpacer tube (bearing weight / weight of running meter) 15 kg / 7 kg per meterLifting device (depending on configuration) max. 80 kg

Maximum loading capacity (useful load)Platform, 500 x 470 mm (without label) max. 50 kgPlatform, 750 x 470 mm (without label) max. 35 kgSwivel/tilt part max. 35 kgPump rod set, single-part / two-part max. 30 kg / max. 20 kgStandard rail on pump rod set max. 10 kgDrawer max. 10 kgKeyboard drawer for PC keyboard only* depending on customer-specific configuration

Total load-carrying capacity of Independant® suspension arms (corresponds to own weight of service head plus added/useful load in each case)Extension arm, 600 mm 980 kgExtension arm, 800 mm 730 kgExtension arm, 1,000 mm 570 kgExtension arm, 1,200 mm 430 kg600 / 600 mm 450 kg600 / 800 mm 360 kg800 / 800 mm 300 kg800 / 1,000 mm 250 kg1,000 / 600 mm 300 kg1,000 / 1,000 mm 220 kg1,000 /1,200 mm 170 kg

Approved adapters* for HUBI 700 lifting deviceADU, ALISEO, KION, JOLLY TRONIC 2, AESTIVA, CATO / CICERO / PRIMUS, MODULUS, EXCEL, KLS Martin equipment trolley* Non-listed adapters require Gebrüder Martin’s approval



Classification acc. to EC Directive concerning medical devices dated 14 June 1993: 93/42/EEC: (I = without gas supply; IIb = with gas supply)Protection class: IEquipment type: BType of protection: covered design Ordinary appliance (closed unit without water ingress protection).



11

Independant® 500 Independant® 300 Duo

03.07 . 90-305-02-04 . Printed in Germany · Copyright by Gebrüder Martin GmbH & Co. KG · Alle Rechte vorbehalten · Technische Änderungen vorbehaltenWe reserve the right to make alterations · Cambios técnicos reservados · Sous réserve de modifications techniques · Ci riserviamo il diritto di modifiche tecniche

Gebrüder Martin GmbH & Co. KGA company of the KLS Martin GroupLudwigstaler Str. 132 · D-78532 TuttlingenPostfach 60 · D-78501 TuttlingenTel. +49 7461 706-0 · Fax +49 7461 [email protected] · www.klsmartin.com

KLS Martin Subsidiaries

KLS Martin France SARL 3, Rue Gambetta 68000 Colmar France Tel. +33 3 89 21 6601 Fax +33 3 89 23 6514 [email protected]

Martin Italia S.r.l.Via Paracelso, 18Palazzo Andromeda, Ingresso 2 20041 Agrate Brianza (Mi) ItalyTel. +39 039 605 6731 Fax +39 039 605 [email protected]

Martin Nederland/Marned B.V.Vissersstraat 9a1271 VE HuizenP.O. Box 2781270 AG HuizenThe NetherlandsTel. +31 35 523 45 38Fax +31 35 523 53 [email protected]

Nippon Martin K.K.6 Fl., 4-6-16 Hiranomachi541-0046 Chuo-ku,Osaka 541-0046JapanTel. +81 6 62 28 9075Fax +81 6 62 28 [email protected]

Orthosurgical Implants Inc. 12244 SW 130 Street Miami, Fl 33186USAOffice phone +1 305 969 45 45Office fax +1 305 969 45 46Toll free +1 888 305 45 [email protected] www.orthosurgical.com

KLS Martin L.P.11239-1 St. John`s Industrial Parkway SouthJacksonville, Fl 32246USAOffice phone +1 904 641 7746Office fax +1 904 641 7378Toll free +1 800 625 [email protected] www.klsmartinusa.com