impacting: aerospace, medical, automotive, electronics ...dguberman.com/g-pmc_2017.pdflockheed...

24
REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] ) Page1 www.g-pmc.com www.aboac.org Daryl Guberman-CEO GUBERMAN-PMC, LLC G-PMC-GROUP, LLC G-PMC, LLC Impacting: Aerospace, Medical, Automotive, Electronics, Service Industries “No one is as deaf as a man who will not listen" -Jewish Proverb Daryl Guberman-CEO GUBERMAN-PMC, LLC 203-556-1493 Email- [email protected] All Information contained herein is factual with weblink supporting data

Upload: others

Post on 09-Jul-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e1

www.g-pmc.com www.aboac.org

Daryl Guberman-CEO

GUBERMAN-PMC, LLC

G-PMC-GROUP, LLC

G-PMC, LLC

Impacting: Aerospace, Medical, Automotive,

Electronics, Service Industries

“No one is as deaf as a man who will not listen"

-Jewish Proverb

Daryl Guberman-CEO

GUBERMAN-PMC, LLC

203-556-1493

Email- [email protected]

All Information contained herein is factual with weblink supporting data

Page 2: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e2

Daryl Guberman- CEO, GUBERMAN-PMC

ASQ MEETING APRIL 2013

Southern CT & New Haven Branch

Dave Levy Region-3 Director ASQ STATED

“There is no restriction doing business accredited or unaccredited, and

ANAB has no problem with what you’re doing (GUBERMAN-PMC,LLC

& G-PMC,LLC, in fact we support you sir”

http://www.dguberman.com/guberman1.mp4

G-PMC, LLC is accredited by ABAC ( American Board of Accredited

Certifications) www.aboac.org

ISO Certification Myths and Scams https://youtu.be/bJ5mpEi7KTQ

Page 3: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e3

AS 9100 Rev C to D

Quality Systems

The short version- history of ISO The Preface:

To become ISO certified, auditors must verify a company's compliance with ISO

standards. After certification, if a company doesn't measure up, it loses

certification. In other words, you're out. Thus, since Lockheed Martin is making it

mandatory for ISO certified companies to be ANAB/IAF accredited, a lot of small

companies in this country are not allowed to do business with Lockheed Martin.

This unconstitutional and non-governmental accreditation body (ANAB) has its

fingers where they do not belong.

In 1933 a similar "accreditation" scheme was attempted by the National Recovery

Administration (NRA) as part of President Franklin Roosevelt's New Deal. The

NRA was supposed to organize the stabilization and revival of the United States

economy after the Great Depression, and was charged with supervising each sector

of the economy, and it was to establish an industry wide code, setting "standards"

for production, prices, and wages. These so-called codes had the force of law and

were exempt from antitrust actions. However, smaller companies could not achieve

or maintain these standards set forth by the NRA with the backing of major

corporations. Therefore, small businesses were not able to compete with large

companies because they lacked NRA "recognition." Thousands of smaller

companies were being taken over by their larger competitors whose executives ran

the NRA.

Page 4: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e4

In 1935, the U.S. Supreme Court unanimously declared that the NRA law was

unconstitutional, and disbanded it, ruling that it infringed the separation of powers

under the United States Constitution. Large companies were using the NRA to

drive smaller companies out of business that were unable to meet the NRA's

standards. In response, executives of major corporations and former NRA

leadership created an international association beyond U.S. law, outside the

country, whose compliance was "voluntary." That organization is the International

Organization for Standardization, or better known as simply ISO.

Today, ISO certification is a requirement used by many large companies such as

Lockheed Martin to drive out smaller companies and swallow them up, just like

what they did with the NRA in the 1930's. However, the foundation of the scheme

is accreditation, with the primary benefactors being members of the International

Accreditation Forum (IAF) and the ANSI-ASQ National Accreditation Board

(ANAB), both of which are colluding with the National Institute of Standards and

Technology (NIST) to further their "authority" and complete dominance in the

marketplace.

Quality and standards are good, but only in a competitive marketplace providing

equal opportunity for companies of all sizes. Therefore, large companies such as

Lockheed Martin must not be allowed to force its suppliers to be certified or

accredited exclusively by bodies paying substantial fees to the International

Accreditation Forum (IAF) in a "pay-to-play" system. Prospective suppliers of

Lockheed Martin should have alternatives outside the IAF when seeking to

maintain or acquire ISO certification.

Page 5: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e5

HEADS UP #22 (ANAB- 2003)

http://anab.org/media/1783/hu22.pdf

Does your registrar(TUV,DNV,BSI,INTERTEK,PJR,NQA, NFS

etc) and accreditation body (ANSI-ASQ=ANAB) care about your

quality?

PRI Performance review registrars – does exclusively NADCAP certification (also ISO, TS,

AS -accredited by ANSI-ASQ national accreditation board – ANAB.

Page 6: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e6

http://www.priregistrar.org/services/aerospace/oasis

Care about your company’s quality?

Is this a free and open market?

Non-Accredited Organizations- Occasionally, non-accredited organizations claim to be accredited or

imply that they are accredited. ANAB takes all possible steps to rectify such misrepresentations.

Non-accredited organizations may claim they can offer consulting, training, and registration to a client.

This type of activity is not allowed per ISO Guides 62 and 66, which detail the requirements to which an

accredited CB must conform.

Following is information on organizations known to have made false or misleading claims of

accreditation or to have promoted activities not in keeping with the requirements of ISO Guides 62 and

66: Quality Assurance Systems (QAS)-QAS is not an ANAB-accredited certification body (CB).

Because QAS has misrepresented its accreditation status and because of issues related to the marketing of

consulting services with registration services, ANAB will not accept an application for accreditation from

QAS, and QAS will not be able to become accredited by ANAB. ANAB has no relationship with QAS.

International Management Systems Marketing (IMSM) IMSM is the related body of Quality Assurance Systems (QAS). IMSM is not a certification body, nor is

it accredited by ANAB. ANAB has no relationship with IMSM.

Page 7: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e7

Accreditation: Protecting the Value of Accredited Certification - Randy Dougherty, The IAF Chair -

https://www.jab.or.jp/en/about/20thanniversary/iaf.html

Page 8: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e8

What gives ANSI-ASQ national accreditation board ANAB its authority?

You decide after reading this.

Date: March 22, 2014 at 12:50:16 PM EDT

Under what regulated authority does ANAB operate?

From Randy Dougherty, the Vice President of ANSI-ASQ national accreditation board (ANAB®), and

past Chairman & President of the International Accreditation Forum (IAF), and current President &

Chairman of IAAC- IAAC (Inter-American Accreditation Cooperation):

“As I mentioned earlier, ANAB is the ANSI-ASQ National Accreditation Board. We are a limited liability

corporation owned 50-50 by ANSI and ASQ. We are not operating under any governmental

regulatory authority with the exception of being a legal entity. Any authority we have is by having our

accreditation services accepted and recognized by the marketplace. Becoming a signatory to the IAF

MLA contributes to this recognition and acceptance.”

NOTE: ANSI-ASQ national accreditation board ANAB is not operating under any governmental

authority.

BUT! -ANSI-ASQ national accreditation board ANAB has an alliance with NIST National Institute of

Standards Technology run under the Department of Commerce, through 50 states and over 60 +

organizations starting in 2003 as seen here.

A. ANSI-ASQ National Accreditation Board to Replace ANSI-RAB NAP

https://www.ansi.org/news_publications/news_story?menuid=7&articleid=978bc4f5-d474-468f-8395-

4d6881c98f4b

B. ANSI-ASQ National Accreditation Board to Move to Single ANAB Brand

http://anab.org/news/latest-news/ansi-asq-national-accreditation-board-to-move-to-single-anab-brand/

C. ACLASS Gains Recognition by NIST as Laboratory Accreditation Body

https://www.ansi.org/news_publications/news_story?menuid=7&articleid=7694831b-2637-4466-

a4af-f09a1538903b

Page 9: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e9

BACKGROUND ANSI-ASQ national accreditation board -ANAB # 3

ANSI-ASQ national accreditation board -ANAB (WEBSITE PRIOR TO 1.1.2015)

https://web.archive.org/web/20140401133147/http:/www.anab.org/accreditation.aspx

Is Your Certificate Accredited?

(Paragraph 1)

If your certificate was issued by an ANAB-accredited certification body (CB), the answer to this question

is probably yes. An accredited certificate should include both the CB's mark and the accreditation mark

of the accrediting body. Be sure to look for both marks.

(Paragraph 5)

An accredited CB may also offer unaccredited certificates or certificates for standards for which it is not

accredited.

Present verbiage on the ANSI-ASQ national accreditation board -ANAB

http://anab.org/programs/isoiec-17021/

Page 10: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e10

Randy Dougherty, the Vice President of ANSI-ASQ national accreditation board (ANAB®), and past

Chairman & President of the International Accreditation Forum (IAF), and current President & Chairman

of IAAC- IAAC (Inter-American Accreditation Cooperation): stated -

The answer is very simple; an accredited CB is not required to issue only accredited certificates. Just as

a company voluntarily decides to be certified, so too CBs voluntarily decide to become accredited; but

even if accredited, a CB is not required to issue accredited certifications only. A certificate is considered

accredited only if it bears an accreditation mark.

? Randy doesn’t know what is official or not official Certification is-

The ANSI-ASQ national accreditation board -ANAB website reference page 5 states “A certificate issued

by an ANAB-accredited certification body (CB) that includes the ANAB accreditation symbol is an

accredited certificate. An accredited certificate includes both the CB's symbol and the accreditation

symbol of the accrediting body. Be sure to look for both.

http://anab.org/about-anab/leadership/

Randy controls ANSI-ASQ national accreditation board -ANAB and IAF at the time now IAAC current

President & Chairman of IAAC- IAAC (Inter-American Accreditation Cooperation

ANAB's Dougherty Elected IAAC Chair

http://anab.org/news/newsletter/summer-fall-2016/dougherty-elected-iaac-chair/

Page 11: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e11

IAF- INTERNATIONAL ACCREDITATION FORUM –

A Response concerning IAF from: Randy Dougherty, the Vice President of ANSI-ASQ

national accreditation board (ANAB®), and past Chairman & President of the International

Accreditation Forum (IAF), and current President & Chairman of IAAC- IAAC (Inter-American

Accreditation Cooperation):

On 10/14/2016 4:16:19 PM, Dougherty, Randy A. wrote:

Dear Daryl,

This is to acknowledge receipt of your email. Your article accurately represents what I

commented about xxxxxx…I still consider him a self-appointed overseer of accredited

certification to ISO 9001.

In the past, you grossly mis-represented my involvement with IAF, and also misrepresented my

body (ANAB) and IAF.

What does my body mean? He is more than just VP of ANSI -ASQ=ANAB and former

chairman of IAF.

Randy Dougherty of ANAB Named Chair of IAF-2009

https://www.ansi.org/news_publications/print_article?articleid=37e9c743-c6d2-4c5e-8750-

682ac3eb0cd7

IAF MEMBERS & SIGNATORIES

Accreditation Body Member seen here -

http://www.iaf.nu/articles/IAF_MEM_USA__all/112

Accreditation Council

The ANAB Management Systems Accreditation Council grants, suspends, and withdraws

accreditation of certification bodies;

http://anab.org/about-anab/leadership/

Randy Dougherty, the Vice President of ANSI-ASQ national accreditation board (ANAB®), and

past Chairman & President of the International Accreditation Forum (IAF), and current President

& Chairman of IAAC- IAAC (Inter-American Accreditation Cooperation) grants, suspends, and

withdraws accreditation of certification bodies;

Page 12: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e12

Lockheed Martin

SINCE 2009 LOCKHEED ON IAF BOARD AS ASSOCIATE MEMBER

LOCKHEED MARTIN demands their suppliers to be IAF in order to meet our customer’s

requirements, Lockheed Martin deals with entities that are certified through the International

Accreditation Forum (IAF).

Lisa Gross SAS Ethics

Officer Lockheed Martin,

MST

Lockheed associate member

http://www.iaf.nu/articles/IAF_after_20_years/271(6th section down)

"While primarily an association of accreditation bodies for conformity assessment, association

members at IAF enjoy voting privileges and positions on the IAF Board and IAF Executive

Committee thereby being able to "influence IAF policy.

http://www.iaf.nu/articles/Assoc_Mem_USA_IAQG/156

Association Member

Economy: World wide

Body: International Aerospace Quality Group (IAQG)

Contact:

Mr. Brian Geer

International Aerospace Quality Group Lockheed Martin

Telephone: +1 817 603 2395 Email: [email protected] Website: http://www.iaqg.org

Code of Conduct Adopted: 06 May 2011

Page 13: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e13

IAF TAX REPORT – INC. DELAWARE

http://dguberman.com/IAF_Tax_Form.pdf

http://accreditation.newsweaver.co.uk/IAF/sd5372mssy3?a=6&p=49721291&t=18726854

Page 14: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e14

CHINA SITS ON IAF AS MEMBER

http://www.iaf.nu/articles/IAF_MEM_China/62

Washington Post:

A list of the U.S. weapons designs and technologies compromised by hackers (CHINA)

https://www.washingtonpost.com/world/national-security/a-list-of-the-us-weapons-designs-and-

technologies-compromised-by-hackers/2013/05/27/a95b2b12-c483-11e2-9fe2-

6ee52d0eb7c1_story.html?utm_term=.575123983e06

Page 15: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e15

General Information

& The NIST connection

ANSI-ASQ national accreditation board ANAB has an alliance with NIST National Institute of Standards

Technology run under the Department of Commerce, through 50 states and over 60 + organizations as

seen here.

A. ANSI-ASQ National Accreditation Board to Replace ANSI-RAB NAP

https://www.ansi.org/news_publications/news_story?menuid=7&articleid=978bc4f5-d474-468f-

8395-4d6881c98f4b

B. ANSI-ASQ National Accreditation Board to Move to Single ANAB Brand

http://anab.org/news/latest-news/ansi-asq-national-accreditation-board-to-move-to-single-anab-

brand/

C. ACLASS Gains Recognition by NIST as Laboratory Accreditation Body

https://www.ansi.org/news_publications/news_story?menuid=7&articleid=7694831b-2637-4466-

a4af-f09a1538903b

Page 16: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e16

Page 17: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e17

http://anab.org/about-anab/faq/#R1

Page 18: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e18

http://www.iaf.nu/upFiles/632863.Rev2_Draft_Minutes_Third_IAF-ILAC_JGA_Sep03.pdf

PAGE 11 OF 11

Page 19: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e19

http://gsi.nist.gov/global/index.cfm/L1-4/L2-16/L3-101 (LOOK AT ANAB-L-A-B

Page 20: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e20

Once on the ANSI-ASQ national accreditation board ANAB website

http://web.archive.org/web/20050210114349/http:/www.anab.org/HTMLFiles/cb_claims.htm

ANSI-ASQ national accreditation board (ANAB) LISTED ON NIST WEBSITE

https://find.nist.gov/search?utf8=true&affiliate=nist-search&query=ANAB&commit=Search

NIST CONFORMITY ASSESMENTS APPROACHES & BEST PRACTICES

MEETING SECTION- 5 PAGE 3 OF 3

https://www.nist.gov/sites/default/files/documents/director/sco/Final-Agenda-04132012.pdf

HE IS A SPEAKER AT THE EVENT: Randy Dougherty, the Vice President of ANSI-ASQ

national accreditation board (ANAB®), and past Chairman & President of the International

Accreditation Forum (IAF), and current President & Chairman of IAAC- IAAC (Inter-American

Accreditation Cooperation)

Randy Dougherty, the Vice President of ANSI-ASQ national accreditation board (ANAB®), and

past Chairman & President of the International Accreditation Forum (IAF), and current President

& Chairman of IAAC- IAAC (Inter-American Accreditation Cooperation)

Page 21: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e21

http://gsi.nist.gov/global/index.cfm/L1-2/L2-2/A-386

Ileana Martinez CHAIRMAN of the IAAC prior to Randy

Dougherty taking over

Page 22: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e22

IAAC Approves ANAB for Food Safety and Information Security

Management Systems

Page 23: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e23

http://anab.org/news/latest-news/anab-signs-iaac-mla-for-medical-devices/

Page 24: Impacting: Aerospace, Medical, Automotive, Electronics ...dguberman.com/G-PMC_2017.pdfLockheed Martin must not be allowed to force its suppliers to be certified or accredited exclusively

REV 1/DWG-11/12/12 The confidentiality of this document is only held between GUBERMAN-PMC, LLC and the recipient. It will not be made public in whole or part by any transmitted means including but not limited to, fax, email, snail mail, newspaper, magazine. Without written permission by Mr. Daryl Guberman-CEO, (203-556-1493/ [email protected] )

Pag

e24

http://anab.org/news/newsletter/summer-fall-2016/dougherty-elected-iaac-chair/

-Question-

1. Between what Lockheed Martin said in the Letter to

Guberman and what you have read in this document is it a

Monopoly, Collusion, Anti-competitive-? YES NO

2. Does NIST & ANAB Have close ties with one another?

YES NO