impact protection catalogue - spanset · secutex®- impact protection – that counts! damage...
TRANSCRIPT
®
®
Impact Protection Catalogue
2
®
®
secutex®- impact protection – that counts!
Damage caused as a result of not having impact pro-tection represents a significant part of the overall costsof a product. The main causes are carelessness, negli-gence and incorrect handling.
The result is preventable damage to goods and stock.But also downtime as a result of injuries or noisedamage is a cost factor that is easily forgotten but hasa considerable effect on profits.
secutex reduces unnecessary costs and removeshazards.
Max
imum
safe
tyfo
r use
rs
Relia
bleopera
tion
due to
optim
ised
functio
nality
Rational and safehandling speeds
up work Cost savings due to
less material damage
Guaranteed
com-
pliancew
ithstatutory
requirements
An everyday occurrence: A chute filled with metal parts is emptied into a container for further processing. The sudden noise startlesstaff in the works hall and disrupts theirconcentration.
Result: In a works hall with 20 employees, loud thudding noises occurringevery 10 minutes will result in the loss of at least 100 work hours peryear (acc. to statistics).
Take action now! secutex will considerably reduce any noise problems.
3
®
®
i
i
i
i
i
i
What advantages doessecutex® offer your company?
Familiar scenario?Trouble ahead!Your second best driveris driving the fork lifttruck. He selects thereverse gear, places hisfoot on the accelerator, accelerates and bang – the forklifttruck loaded with expensive products crashes into a shelfunit …
Result: Goods are damaged, the shelf unit is deformed, theforklift truck has broken down. Waiting for a repair service,unloading an entire shelf unit, the works look like a buildingsite … lost time and money. Even if some of the damage iscovered by insurance, the result is annoying.
Ensure that secutex impact protection is installed everywherewhere goods and stock are to be protected against acciden-tal impact: A solution that pays for itself.
Benefit from our exper-tise. Take advantage ofour know-how!
Page
secutex – different types 4-5
4 effective advantages 6
Chemistry and physics 7
Mechanical processing 8of secutex material
Areas of application 9
Impact protection 10-11Welded and riveted
Impact protection 12-13Welded
Impact protection 14-15Glued
secutex Soft impact 16-17protection
Special profiles: 18-19Hollow sections, semicircular, angled, ramp fenders
Special products: 20-21Ramming protection
Transportation holders and 22pipe straightening equipment
Enquiry form 23
Subject to technical alteration.secutex is a registered trademark of Spanset-secutex GmbH
4
®
®
secutex is an excellent polyurethane elastomer with aparticularly advantageous combination of physicaland chemical properties:
High structure retentioni.e. compared to other chemical materials, secutexhas an extremely high tensile strength. The secutexmaterial can be stretched to 500 % of its originallength withoutbreaking.
High flexibilityi.e. compared to conventional rubber, secu-tex offers a considerably higher flexibility.And even under extreme temperaturefluctuations, secutex remains flexible.
Extremely hard wearingi.e. secutex is practically indestructible. In wet wear-resistance tests, secutex fared better than manymetals.
The right perforated platefor every dimension
l Perforated platewelded to sheet steel
l secutex with(d = 5 mm) extra sturdy perforated plate
l secutex with (st. st.) stainless steel perfo-rated plate ideal for the food processing and chemical industry
10 mm4 mm6 mm
6 mm
20 mm
10 mm10 mm
10 mm4 mm6 mm
6 mm
This is secutex® … … and these are the different types:
secutex® impact pro-tection including per-forated plate insert
Advantages:l Perforated plate insert serves as reinforcement
l No longitudinal or cross expansion
l Secure seat due to bolting, riveting, nailing or welding
l In the case of welding, no expensive accurately repetitive drilling is required
l Protruding perforated plate inserts facilitate welding
from page 10
1
Dimensions ofperforated plate
5
®
®
secutex®
impact protectionincluding fabric insert
Advantages:l The fabric insert enhances stability without adver-
sely affecting flexibility
l Extremely flexible material, easily adaptable to siteconditions
l Little extension in longitudinal and lateral direction
l Retains shape in case of sharp edges
l High elasticity also under high linear loading
l Excellent shape restoring ability
l Easy installation by bonding, bolting with large sheet metal panels or flat steel
secutex®
impact protectionwithout reinforcement
Advantages:l Easily adaptable to site conditions
l secutex offers maximum flexibility
l Simple installation by bonding
from page 14 from page 14
Special types:l Thin Powerflex coating on
galvanised P1 sheet metal
l secutex profile incl. C rail. Install C rail and simply insert secutex profile
l secutex-coated rollers
l secutex castings produced from customer drawings (custom made)
l secutex hollow profile, semicircular, etc.
l secutex transportation holders and pipe straightening equipment
… and much more. Give us a call! We provide the right solutions!
Select from our matching accessories:
l secutex with internal fibreglass reinfor-cement – even more resistant
l secutex ramp fender – extremely high energy absorption capability
2 3
4
6
®
®
secutex® – simply effective!
1. The impact reduction effectHope for the best –expect the worst …
Where forces clash, something normally has to give.Impact damage to goods, materials and stock is oftencaused by carelessness, negligence, foolishness,incorrect handling or inadequate protection. Acci-dents are unpredictable. Consequently everythingshould be done to prevent any losses.
Rule of thumb for impact protection: The more rigid and thinner the secutex material,the lower the impact-reducing (elastic) protec-tion.The thicker and wider the secutex material, themore secure the impact-reducing protection.
Additional foam layers or hollow sectionsdeforming in case of an impact, increaseimpact resistance.
3. Anti-slip protectionsecutex prevents loads from slippingduring transportation
In tests, secutex scored highest compared to all othersimilar materials.secutex not only fulfils the standard but exceeds thecoefficient of friction regarded as the standard.
Guide values for dry friction
In case of wet or oily surfaces, we recom-mend secutex with textured surfaces. Thisensures that the direct material contact is
restored.
2. Noise-reduction effectWho does not want to avoid noise whe-never possible?
Did you know that 60 % of all occupational illnessesare caused by noise? Even brief peaks exceeding140 dB or prolonged noise exceeding 70 dB(A) can permanently damage one’s hearing.
And that could prove to be expensive! Stati-stics have repeatedly shown: Staff illness ordisability at work costs money. Do not leave ituntil it is too late! Protect your staff and yourcompany. Use secutex impact protection.
4. Long-term effectsecutex offers a high wear and tearresistance
A high cutting resistance ensures extra longlife. In the case of high pressure loading and extreme
flexing, we recommend the useof harder materials.
secutex equipped with fabric orfibre glass reinforcement offers ahigher wear and tear resistancethan secutex without reinforce-ment.
secutex secutex-yellowShore A hardness 75° 55°/75° 90°
Friction coefficient 0,3-0,4 µ 0,3-0,4 µ 0,15-0,25 µ
7
®
®
Technical specification
Chemicals do not affect secutex®
secutex is not affected by most standard chemicals. Thiswas proven by a 200-hrs. test at 20 oC. Short-time exposure does not affect the material.
1 Reduction of mechanical values 0-5 %2 Reduction of mechanical values 5-15 %3 Reduction of mechanical values >15 %
Shore A hardness A secutex secutex-yellow(tolerance ± 5°) DIN 75° 55°, 75°, 90°
Formic acid 2 % 15 % 2
10 % 2Ammonia 5 % 1Boric acid 4 % 1Bleach 3 % 1Ethanoic acid 2 % 1
5 % 210 % 2
Formaldehyde 37 % 3Tannic acid solution 20 % 1Caustic potash solution 20 % 3Salt solution 10 % 1Linseed fatty acid 1Methanol 3Dichloromethane 3Lactic acid 45 % 2Caustic soda lye 10 % 2
40 % 250 % 3
Phosphoric acid 25 % 250 % 2
Hydrochloric acid 10 % 1Nitric acid 10 % 3Sulphuric acid 10 % 1
25 % 250 % 3
Soda solution 20 % 24-star petrol 3Hydrogen peroxide 10 % 1Xylene 3Citric acid 10 % 3Sugar solution 30 % 1
Where secutex is to be exposed to other materials, werecommend carrying out an initial test.
Please request secutex material samples.
Where secutex is to be used in safety areas, themanufacturer must be contacted.
Long lifesecutex yellow including hydrolysis stabiliser can be exposed to any weather condition – without problem.
secutex secutex-yellow secutex-yellow secutex-yellowShore A hardness (tolerance ± 5°) 75° 55° 75° 90° Norm
Hydrolysis stabilised no yes yes yesDensity 1,22 g/cm3 1,21 g/cm3 1,22 g/cm3 1,23 g/cm3 DIN 53505Tension100 % elongation 6,5 N/mm2 1,15 N/mm2 3,32 N/mm2 5,25 N/mm2 DIN 53504300 % elongation 9,5 N/mm2 1,65 N/mm2 5,25 N/mm2 8,29 N/mm2 DIN 53504Tensile strength 37,5 N/mm2 19,5 N/mm2 34,2 N/mm2 38,5 N/mm2 DIN 53504Elongation at break 500 % 640 % 475 % 470 % DIN 53504Resistance to tear propagation 27 N/mm2 15,8 N/mm2 35,0 N/mm2 55,2 N/mm2 DIN 53515Rebound resilience 40 % 61,5 % 40,4 % 30,4 % DIN 53515Abrasion 50 mg 21 mg 35 mg 36 mg DIN 53516Pressure deformation test72 h at 23 oC 25 % compression 11,40 % 55,1 % 9,1 % 41,6 % DIN 5351724 h at 70 °C 25 % compression 29,40 % 19,9 % 8,9 % 10,0 % DIN 53517Application temperature* -40 °C to 100 °C -20 °C to 80 °C -20 °C to 80 °C -20 °C to 80 °C DIN 53457Surface resistance 1010-1013 1010-1013 1010-1013 1010-1013 DIN 53482Volume resistance 1011-1014 1011-1014 1011-1014 1011-1014 DIN 53482Contraction during processing 1-2 % 1-2 % 1-2 % 1-2 %
*) Disintegrates at temperatures of over 150 o C, does not melt (request our separate fire information sheet)
8
®
®
secutex® - easy to work with!
It is just one of the material’s characteristics. As allother PUR products, secutex also experiences a volume reduction of 1-3 % during processing. secutexcastings comply with the tolerances of M3 DIN 7715.Casting elements can be optimised in order to obtainaccurate results. Our CNC-controlled processingmachines also allow an extremely accurate mecha-nical tolerance.
Cutting and sawingWant to cut or saw secutex yourself?Just ensure that blades are extra sharpfor cutting secutex.
A band saw can be used to saw thesecutex material. Due to the excellentabrasion properties, the materialattempts to withstand or evade the cut-ting tool. Ensure a low wedge angle andadapt the cutting speed, where necessary.
ChisellingKnife-like implements as used for woodworking are best suited for this purpose.
Important! The tool angle should be 15°. It isrecommended to use a drilling emulsionfor preparing the surface and cooling.
Drilling/thread cuttingNo special tools are required. Normalwood and metal drills suffice.
Important!Cutting speed approx. 40 m/min.,advance approx. 0.01-0.03 mm/rev. In the case of low shore hardness, secutex can evade the tool. The holecould therefore be up to 5 % smaller.
MillingUse standard milling cutters with a low number ofteeth.
Important! Peripheral speed approx.200-400 m/min, clearance angle α10°, effective cutting angle γ 25°.
It is recommended to use a drilling emul-sion for preparing the surface and cooling.
TurningFor this purpose, standard SS turning chisels can beused (tool angle 12°, β = 53°, γ = 25°).
Important! Cutting speed approx. 300-500 m/min, hardness < 80° Shore A,100-200 m/min, hardness < 90° ShoreA. Advancing speed approx. 0.1-0.2
mm/U. It is recommended to use a dril-ling emulsion for preparing the surface and
cooling.
The harder the secutex material, the better the surfacequality. For finishing, the use of a belt grinder isrecommended.
Grinding/rougheningsecutex can be easily ground with grinding machinesor belt grinders (standard grain size or ceramic bon-
ding).
Important! Grinding speed of approx.30-50 m/sec. Wet grinding is recom-mended. Note: a wire brush can alsobe used for roughening.
isecutex-service: Holes, stepped holes andthreads are already included during pro-duction in accordance with customerrequirements and stipulated exact dimen-sions. Stamping work can also be carriedout.
9
®
®
secutex®- a versatile product – application optionsSector Area of application Product Important advantages
Pipe manufacturers Pipe straightening plants secutex pipe module Protection of pipe ends, noise protectionDischarge systems secutex impact protection flat Protection of pipesImpact protection secutex impact protection hollow Noise protectionRollers secutex roller coating Excellent reliability due to perfectly adapted solutions
Steel and rolling mills Coil support secutex impact protection flat Protection of high-quality coilsCoil storage mobile coil store Protection of high-quality coils, H & S at workCoil transportation secutex magnet protector Protection of coil sides during handlingCoil hooks secutex impact protection flat
Wire manufacturers Wire guides secutex impact protection flat Noise protectionFork lift truck mandrills secutex pipe module Protection of high-quality wires, H & S at work
Punching and screw Material chutes secutex impact protection flat Noise protection, protection of materialproduction
Power plants Storage of machine secutex support beam Can be decontaminated, long life, does not break (in components contrast to wood)
Pipe transportation secutex transportation holders Safe transportation of pipes and round material
Automotive industry Coil support secutex impact protection flat Protection of high-quality coils, no impression in coils – no material is broken out when stamping chassis parts
Coil storage mobile coil store Protection of high-quality coils, H&S at work
Transportation racks adapted special profiles Transportation parts (adapted profiles) are not damaged, cost-effective due to highly rational fixing options, safe transportation due to excellent friction
Transportation racks Powerflex panel Rationally processable on sheet metal machines (cutting, punching, edging, rolling, etc.)
Feed units adapted special profiles Cost-effective due to ready-cast load carrier (no mechanical processing required)
Stainless steel, brass, Coil support secutex impact protection flat Protection of high-quality coils, no contact corrosionnickel, aluminium storage racks, shelves secutex impact protection flat Protection of high-quality surfaces, no indentations
Glass-processing Work surfaces secutex impact protection Non-slip work surfaces, fragments fall into gaps – highcompanies semicircular quality frames and glass surfaces are not scratched
Storage racks secutex impact protection flat Easily damaged edges are protected
Heavy machinery and Turning blocks secutex turning mats Safe turning of heavy components, no uncontrolled steel construction slipping of loads, long life, does not break (in contrast to
wood)
General mechanical Guide strips secutex profile Cost-effective due to rational fixing options, no mechanical engineering processing required
Feed units adapted special profiles Cost-effective due to ready-cast load carrier (no mechanical processing required)
Rollers secutex roller coating Excellent reliability due to perfectly adapted solutions
Precision mechanics Work surfaces secutex impact protection flat Perfect "indestructible” work table, anti-slip work surface
Logistics, forwarders Loading ramps secutex ramp fender Long life, excellent impact resistance
Shelves, posts, corners secutex ramming protection Shelf supports are no longer damaged by fork lift trucks, no more downtime caused by replacing damaged shelves
Food industry Walls, posts, corners secutex flat and ramming No more damage to wallsprotection
Fork lift transportation of secutex fork protection with Safe non-slip transportation of palletsfrozen products textured surfaceFork lift transportation of secutex fork protection with Non-slipplastic boxes and textured surfacestainless steel containers
10
Our most popular product – secutex impact protec-tion including perforated plate. Easy and flexibleto use and safely secured with the perforatedplate serving as reinforcement. Providing auniversal impact protection in next to no time.
Advantages of the perforated plate insert:l The perforated plate insert prevents
longitudinal and lateral extension. l Simple to secure by bolting, riveting, nailing
Areas of application:l Walls, floors, surfaces to be protected,
transportation equipmentl Everywhere, where goods are to be protectedl Reduces wearl Noise protection, anti-ramming protection
Examples:l Collecting troughs l Grippersl Sheet metal boxes l Lifting trucksl Marina jetties l Ramp protectionl Coil hooks l Stackersl Corner protection lWall and surface protection
®
®
iSpecial products:
C rail small/large(page 11, fig. 2)
P1 sheet steel
secutex® – impact protection for bolting and riveting
11
®
®
Perforated plate options
Perforated plate – standard
Perforated plate – standard, welded
onto sheet steel base
Perforated plate, heavy duty version
Perforated stainless steel plate
PUR options Surface hardness
secutex - standard 75° Shore Asecutex-yellow: 55° Shore Asecutex-yellow: 75° Shore Asecutex-yellow: 90° Shore A
Available options
Perforated plate paint Type
Standard redSpecial paint black/yellow
�� � �
Application examples
Fixing optionsMachine Hexagon socket Hexagon socket Rivet Blind Wood screw Spax screw frombolt + nut screw + thread screw + wall plug from front rivet from front front, w/o drilling
DimensionsThickness: min. 10 mmWidth: 30-1000 mmLengths: Standard length 3 m
iFor further fixinginformation, seesecutex installationbooklet.
SPL-F
i Use the comprehensive enquiry form atthe end of this catalogue to determineyour special requirement.
Surface Optional textured surfaces
Smooth Polished Fabric Pyramid
12
Conditions are not always the same with regard toimpact protection requirements and fixingoptions. The product must be flexible. secutexprovides a solution for all applications. Welding is often the most simple and securefixing method. The different perforated platetypes allow a wide range of applications.
Advantagesl Simply weld to work piecel No accurate repeated drilling is required l No holes in secutex impact protection materiall Completely smooth impact protection surfaces
Areas of application:l On all metal surfacesl On thin metal wallsl Everywhere, where material cannot be bolted
or no holes can be drilled
Examples:l Collecting troughs l Ramp protectionl Sheet metal boxes l Side railingsl Containers l Stackersl Grippers l Support protection l Lifting trucks l Fork protection
®
®
secutex® – welded impact protection
iSpecial products:
C rail small/large
13
®
®
Available options
PUR options Surface hardness
secutex – standard 75° Shore Asecutex-yellow: 55° Shore Asecutex-yellow: 75° Shore Asecutex-yellow: 90° Shore A
Perforated plate options
Perforated plate – standard
Perforated plate – standard, welded onto sheet steel base
Perforated plate, heavy duty version
Perforated stainless steel plate
Perforated plate paint Type
Standard redSpecial paint black/yellow
Fixing optionsPerforated plate Perforated plate, protruding Plate protruding Plate, protruding C rail
protruding over sides over sides, angled 90o over sides over sides, angled 90o small/large
DimensionsThickness: min. 10 mmWidth: 30-1000 mmLengths: Standard length 3 m
time! Also ensure that the secutex material is protectedagainst welding splatter. For further fixing information,see secutex installation booklet.
SPL-FSurface Optional textured surfaces
Smooth Polished Fabric Pyramid
Welding instructionsPlease observe the pre-treatment of the surfaces, thecharacteristic of the welded material and the welding
secutex® – bonded impact protection
14
Where screwing or welding is not possible, simplyglue secutex to areas where impact protection isrequired. No problem for the special secutex adhesive. secutex – the gentle answer to strong impact forces.
Advantages:l Can be used (nearly) everywhere as it is gluedl No drilling or welding requiredl Glue where welding or screwing is impossible
Areas of application:l Thin to medium thick wooden surfacesl Glassl Sound-absorbing elementsl Valuable precious wood surfaces
Examples:l Refrigerated roomsl Painted, veneered walls and surfacesl Sound studiosl Steel constructionl… and particularly to meet your requirements
®
®
15
®
®
Available options
PUR options Surface hardness
secutex - standard 75° Shore Asecutex-yellow: 55° Shore Asecutex-yellow: 75° Shore Asecutex-yellow: 90° Shore A
Perforated plate options
Without reinforcement SP-F
Reinforced with fabric SPG-F
Reinforced with fibreglass SPG-F
� � � � �
Gluing instructionsGrind down Clean contact areas Apply adhesive Spread adhesive film Clamp glued materialsbase material with a cloth roughly to all areas* evenly* together
Special adhesive
isecutex with Velcro tape P1 fabric
Special products:
Universal, tension-compen-sating construction adhesive.Easy to use during installation as two-component system.
Observe safety instructions!!
DimensionsThickness: min. 10 mmWidth: 30-1000 mmLengths: Standard length 5 m
SP-F
*) Apply the adhesive to one and the hardener to the other contact surface. Theadhesive only starts bonding when the contact areas are placed together. In thisway, the best possible application is guaranteed!
Surface Optional textured surfaces
Smooth Polished Fabric Pyramid
16
secutex soft easily absorbs impacts, offering vital sur-face protection. Sturdy but at the same time impactresistant. Due to its flexible impact-protection lay-er, secutex soft is particularly suited for sensitivegoods and objects with uneven surfaces. secutexsoft offers effective impact resistance even undermedium loading.
Advantages:l Particularly suited for sensitive goodsl Anti-ramming and impact protection layer ideally
suited for all applicationsl Noise/sound reducingl Light in weight
Areas of application:l Exit/entrance areas and corridorsl Brickwork or concrete manufacturersl Logistics sectorl Walls of stairwells l Anti-slip protection during transportation
Examples:l Loading areas – rail, lorries, aviation, shippingl Grippers in brick making sectorl Side-impact absorptionl Packagingl Transportation equipmentl Absorption mats
®
®
secutex®-active impact protection
17
®
®
secutex impact protection surfaceoptions
secutex coating
secutex yellow
secutex thin coating
secufoam® Foam thickness Materialoptions mm hardness
yellow 5, 10, 20
green 5, 10, 20
blue 5, 10, 20
white 10, 20
secutex impact protection baseOptionsImpact protection – flat with perforated plate insertImpact protection – flat w/o perforated plate insert
Available optionsSPL-SoftSurface Optional textured surfaces
Smooth Polished Fabric Pyramid
Fixing optionsHexagon socket
bolt and nut Gluing
For alternative fixing options, see page 11
DimensionsThickness: min. 10 mmWidth: 30-1000 mmLengths: Standard length 3 m
Use the comprehensive enquiryform at the end of this catalogueto specify your special require-ment
i
18
®
®
secutex® special profiles – with and without perforated plate
Fixing optionsMachine bolt Hexagonal Welding, perforated
and nut socket screw plate, protruding onand dowel sides, 90° edges
No. of holes
1-5
Dimensions mm
Diameter ofholes:20, 30, 40, 50 mm
Ø 20 mm
Ø 30 mm
Ø 40 mm
Ø 50 mm
30 mm
40 mm
50 mm
60 mm
40 mm
50 mm
60 mm
70 mm
Options
Sometimes, a hollow design offers the best solution,as the bigger the deformable zone, the higher theimpact protection. This does not only apply to carsbut everywhere where impact protection isrequired. Hope for the best – expect theworst … Protect your goods against damage! secutex PROFILE is hollow – butfor a very good reason.
Advantages:l Highly flexiblel Precise positioning of cavities ensures
large "deformable zones”l Cushioned impact protectionl Profiles for sliding on to "C” sections
made from metal, concrete or wood
Areas of application:l Edge protection l Shock protectionl Partial padding l Impact protection
Examples:l Pipe protection and insulationl Machine parts l Boat fendersl Car parts l Pipe guides
Standard version with perforated panel insert Colour of perforated plate: redStandard length 3 m
Do you require evenmore specialised secutexprofiles? No problem!secutex will produceprofiles according toyour requirements, offe-ring a cost-effective, on-time quality solution.
i
Hollow profile SPL-HP
19
®
®
Semicircular SPL-HR
Ramp fender SPG-RF
Standard version with perforated plate insertPerforated plate colour red, standard length 2 m
Fixing optionsMachine screw Spax screw from
and nut Blind rivet front, w/o drilling
Thickness of legs
10, 20 mm
Options
Length of legs
50, 75, 100, 150, 200 mm
Standard version with perforated plate insertPerforated plate colour red, standard length 3 m
Fixing optionsMachine screw Spax screw from
and nut Blind rivet front, w/o drilling
Diameter mm
30, 40, 50, 60, 7080, 90, 100, 120
Options
Fixing options
Flat steel with hexagonalsocket screw and nut
OptionsWidth
80, 100 mm
Standard version with fabricFabric colour black/yellow Standard length 2.9 m, height 100 mm
iAsk for the rampfender fixing set.
Angle SPL-W
Thickness
Length of legs
Diameter
20
The secutex anti-rammingprotection reliably safe-guards your shelf systemagainst impacts and protects your goods.
i„Time is money ...“… and who wants to be slower than other fork lifttruck drivers? And then it happens. It only takes a littlelack of concentration and the heavy fork lift truckrams the shelf unit. And then costs start to pile up:Empty the store area, dismantle the shelf, wait forspare parts. A building site in the middle of the store… But all this can be avoided. Protect your stock withsecutex anti-ramming protection!
®
®
Anti-ramming protection – for absolute safety!
"7 years ago we installed secutex anti-ram-ming protection on all important shelf are-as. The secutex anti-ramming protectionhas long paid for itself. If I think back towhat problems we used to have ….”(Logistics Manager, Viersen)
21
Guards for pallet shelves SAS-A
SAS-B has a rounded front,facilitating driving into the shelves, in particular, wherespace is limited. Other sizesavailable on application.
Guards SAS-B
Particularly sturdy design forheavy-duty operation.
Guards SAS-C
Guards SAS-D
For the protection of free-standing supports and concretepillars.
Guards SAS-E
For fork lift truck and liftingtrolley operation.
Order no. Weight kg
SAS.C.000 10,0
Order no. Width Length Weight
mm mm kg
SAS.A.0082 82 1000 11,0SAS.A.0087 87 1000 11,3SAS.A.0102 102 1000 16,2SAS.A.0112 112 1000 16,9
Order no. Width Length Weight
mm mm kg
SAS.B.0082 82 1000 9,2SAS.B.0087 87 1000 9,2SAS.B.0102 102 1000 15,3SAS.B.0112 112 1000 16,4
B
Order no. Weight kg
SAS.D.000 8,7
Order no. Weight kg
SAS.E.000 8,9
B
5 5
190190
290200
200
Transparent designfor pallet shelves.Guards are atta-ched to the frontsupports of the pallet shelves andprotect the shelfsupports againstcollapsing.Other sizes available on application.
®
®
Guards – anti-ramming protection
22
®
®
Impact protection
Pipe straightening plants generate a lot of noise.The secutex casing offers effective noise relief. Thesecutex material including a perforated plate insert,is particularly wear resistant and offers excellent
compensation for pipemovement.
secutex impact protection retains the shape
secutex adjustable transportation holders – guaranteed fit secutex transportation holders are coatedwith non-slip secutex. Pipes can no longerslip or roll and everything arrives safely.secutex transportation holders are adjustable. A worthwhile investment for your company.
®
®
®
®
SpanSet Ltd.Telford WayMiddlewich, CheshireCW10 0HX UKTel.: 01606 737494Fax: 01606 737502Email: [email protected]: www.spanset.co.uk
Surface: Surface smooth (standard)Special surfaces Polished
FabricPyramid
PUR-options: secutex standard, 75° Shore Asecutex-yellow, 55° Shore Asecutex-yellow, 75° Shore Asecutex-yellow, 90° Shore APowerflex - thin coating
Foam type: secufoam®-yellow Thickness: 5 mm 10 mm 20 mm(impact protection secufoam®-green Thickness: 5 mm 10 mm 20 mmsoft only) secufoam®-blue Thickness: 5 mm 10 mm 20 mm
secufoam®-white Thickness: 10 mm 20 mm
Company:
Name:
Industry:
Phone:
Fax:
Street/P.O.BOX:
Postal code/Town:
✘Date Signature
Coating:
Reinforcement:Perforated plate/ Perforated plate (standard) Thickness: 2 mmreinforcement: Perforated plate with steel base Thickness : 2 mm + 4 mm sheet steel
Stainless steel perforated plate Thickness : 2 mm Heavy-duty perforated plate Thickness : 5 mm
Perforated plate colour red (standard)Special colour black/yellow
Protrusion: Does not protrudeProtrudes over sides mm protrusionSide edging mm protrusion
Fabric: Fabric (impact protection can only be glued)Fibreglass reinforcement (impact protection can only be glued)
without w/o perforated plate (impact protection can only be glued)reinforcement
Dimensions:Thickness (min. 10 mm): ___________ mmWidth (30-1000 mm): ___________ mmLength (standard 3 m): ___________ mm
Enquiry/order formSurface PU
R Däm
pfungsschichtReinforcem
entE
rst foto
kop
ieren, dann faxen!
Kla
ppse
iten-
Beg
renz
ung!
Lin
ie w
ird n
icht
mitg
edru
ckt!