iljin telecommunication cables

8/18/2019 ILJIN Telecommunication Cables

1/20

Application

- ETL Verified for guaranteed performance

- Supports Fast Ethernet, Gigabit Ethernet, 155Mb/s ATM, Multimedia

- All accepted design for global commercial network installation

- Simplified Structured cabling solution preserving long-term network investment- Electrical performance comply with ANSI/TIA-568-C.2

- Every master reel is tested for electrical performance compliance

- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),

100 BASE-TX, 10 BASE-T

- 52/155 Mb/s ATM

- ANSI X3.263: 100 Mb/s

- IEEE 802.3af for DTE Power (PoE)

- IEEE 802.3at for PoE Plus

- Broadband & Baseband

Analog Video

Standard Compliances :

- ANSI/TIA 568-C.2

- ANSI/TIA 862 (Building Automation)

- ISO/IEC 11801 Ed. 2.0 (Class D)- ICEA S-90-661 (Category 5e)

- NEC/CEC Type CM/CMR

(UL 1685/1666)

- RoHS Compliant Directive

2002/95/EC

- UL 444

- KS C 3342

UTP Category 5e

Cross Section

Item Unit PVC/LSZH

Number of Pairs EA 4

Conductor DC Resistance Ohms/100m 9.38

Resistance Unbalance % 5

Mutual Capacitance nF/100m 5.6

Capacitance Unbalance pF/100m 330

Characteristic Impedance Ohms 100±15Propagation Delay ns/100m 538@100MHz

Delay Skew ns 45

Nominal Velocity of Propagation % 67

TemperatureRating

Installation ℃ 0 to +60

Operation ℃ -20 to +75

Minimum Bend Radius in.(mm) 1.0(2.54)

PackagingType 305m(1000ft) Reelex

Weight lb/kft(kg/km) 6(9)

Materials

Conductors 24 AWG, Solid Bare Annealed Copper

Insulation in.(mm) 0.035(0.90), HDPE

Jacket in.(mm) 0.19(4.83), PVC or LSZH (Low Smoke Zero Halogen)

Technical Data

Frequency

[MHz]

ReturnLoss

InsertionLoss

NEXT PSNEXT ACRF PSACRFPropaga-

tion DelayPropagationDelay Skew

dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

ns/100m(Max.)

ns/100m(Max.)

1 20.0 2.0 65.3 62.3 63.8 60.8 570 45

4 23.0 4.1 56.3 53.3 51.8 48.8 552 45

8 24.5 5.8 51.8 48.8 45.7 42.7 547 45

10 25.0 6.5 50.3 47.3 43.8 40.8 545 45

16 25.0 8.2 47.2 44.2 39.7 36.7 543 45

20 25.0 9.3 45.8 42.8 37.8 34.8 542 45

25 24.3 10.4 44.3 41.3 35.8 32.8 541 45

31.25 23.6 11.7 42.9 39.9 33.9 30.9 540 45

62.5 21.5 17.0 38.4 35.4 27.9 24.9 539 45

100 20.1 22.0 35.3 32.3 23.8 20.8 538 45

Electrical Performance (ANSI/TIA-568-C.2)

ILJIN Electric | 7F ILJIN Building, 50-1 Dohwa-dong, Mapo-gu, Seoul, Korea Copyright 2012 ILJIN Electric Co. Ltd.

The above all characteristics of ILJIN Local Area Network Cable can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or

would like to place an order, please call ILJIN Electric on +82 2 707 9104.Visit www.iljinelectric.com for more information about ILJIN Electric.

ILJIN ELECTRIC LOCAL AREA NETWORK CABLE

UTP CATEGORY 5E

1

2

3

4

1. Conductor

2. Insulation

3.Twisted Pair

4. Ripcord (Optional)

5. Jacket

5


2/20

Application


- Capable of handling full broadband and baseband video signals

- All accepted design for global commercial network installation

- Simplified Structured cabling solution preserving long-term network investment- Electrical performance comply with ANSI/TIA-568-C.2


- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),


- ANSI/TIA/EIA 854: 1000 BASE-TX

- 155 Mb/s, 1.2 Gb/s ATM

- ANSI X3.263: 100 Mb/s



- Digital Video


Analog Video


- ANSI/TIA 568-C.2- ANSI/TIA 862

(Building Automation)

- ISO/IEC 11801 Ed. 2.0 (Class E)

- ICEA S-102-7000 (Category 6)


(UL 1685/1666)


2002/95/EC

- UL 444

- KS C 3342

UTP Category 6

Fre-

quency

[MHz]

ReturnLoss

InsertionLoss

NEXT PSNEXT ACRF PSACRF TCL ELTCTLPropaga-tion Delay

PropagationDelay Skew

dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Max.)

dB/100m(Max.)

1 20.0 2.0 74.3 72.3 67.8 64.8 40.0 35.0 570 45

4 23.0 3.8 65.3 63.3 55.8 52.8 40.0 23.0 552 45

8 24.5 5.3 60.8 58.8 49.7 46.7 40.0 16.9 547 45

10 25.0 6.0 59.3 57.3 47.8 44.8 40.0 15.0 545 45

16 25.0 7.6 56.3 54.3 43.7 40.7 38.0 10.9 543 45

20 25.0 8.5 54.8 52.8 41.8 38.8 37.0 9.0 542 45

25 24.3 9.5 53.3 51.3 39.8 36.8 36.0 7.0 541 45

31.25 23.6 10.7 51.9 49.9 37.9 34.9 35.1 5.1 540 45

62.5 21.5 15.4 47.4 45.4 31.9 28.9 32.0 n/s 539 45

100 20.1 19.8 44.3 42.3 27.8 24.8 30.0 n/s 538 45200 18.0 29.0 39.8 37.8 21.8 18.8 27.0 n/s 537 45

250 17.3 32.8 38.3 36.3 19.8 16.8 26.0 n/s 536 45



UTP CATEGORY 6

Cross Section

1

2

4

5

3

1. Conductor

2. Insulation

3. Twisted Pair

4. Cross Filler

5. Ripcord (Optional)

6. Jacket

6

Item Unit PVC/LSZH







Delay Skew ns 45


TemperatureRating




PackagingType 305m(1000ft) Reelex / Reel in the box

Weight lb/kft(kg/km) 21(32) / 27(42) (In case of 24AWG)

Materials

Conductors 24 AWG / 23AWG, Solid Bare Annealed Copper

Insulation in.(mm) 0.037(0.95) / 0.040(1.02), HDPE

Jacket in.(mm) 0.228(5.8) / 0.243(6.2), PVC or LSZH(Low Smoke Zero Halogen)

Technical Data





3/20

Application

- Foil shield reduced electromagnetic interference (EMI) for optimal performance



- All accepted design for global commercial network installation- Simplified Structured cabling solution preserving long-term network investment

- Electrical performance comply with ANSI/TIA-568-C.2


- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),


- 52/155 Mb/s ATM

- ANSI X3.263: 100 Mb/s




Analog Video


- ANSI/TIA 568-C.2


- ISO/IEC 11801 Ed. 2.0 (Class D)

- ICEA S-90-661 (Category 5e)- NEC/CEC Type CM/CMR

(UL 1685/1666)


2002/95/EC

- UL 444

- KS C 3342

FTP Category 5e

Frequency

[MHz]

ReturnLoss

InsertionLoss



dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

ns/100m(Max.)

ns/100m(Max.)

1 20.0 2.0 65.3 62.3 63.8 60.8 570 45

4 23.0 4.1 56.3 53.3 51.8 48.8 552 45

8 24.5 5.8 51.8 48.8 45.7 42.7 547 45

10 25.0 6.5 50.3 47.3 43.8 40.8 545 45

16 25.0 8.2 47.2 44.2 39.7 36.7 543 45

20 25.0 9.3 45.8 42.8 37.8 34.8 542 45

25 24.3 10.4 44.3 41.3 35.8 32.8 541 45

31.25 23.6 11.7 42.9 39.9 33.9 30.9 540 45

62.5 21.5 17.0 38.4 35.4 27.9 24.9 539 45

100 20.1 22.0 35.3 32.3 23.8 20.8 538 45



FTP CATEGORY 5E

Cross Section

1

2

3

4

5

6

1. Conductor

2. Insulation

3. Twisted Pair

4. Polyester Tape (Optional)

5. Drain Wire

6. Al/Mylar Tape7. Jacket

7

Item Unit PVC/LSZH







Delay Skew ns 45


TemperatureRating




PackagingType 305m(1000ft) Reel / Reel in a Box


Materials



Jacket in.(mm) 0.248(6.3), PVC or LSZH(Low Smoke Zero Halogen)

Technical Data





4/20

Application

- Foil shield reduced electromagnetic interference (EMI) for optimal performance






- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),



- 155 Mb/s, 1.2 Gb/s ATM

- ANSI X3.263: 100 Mb/s



- Digital Video


Analog Video


- ANSI/TIA 568-C.2





(UL 1685/1666)


2002/95/EC

- UL 444

- KS C 3342

FTP Category 6

Fre-

quency

[MHz]

ReturnLoss

InsertionLoss



dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Max.)

dB/100m(Max.)

1 20.0 2.0 74.3 72.3 67.8 64.8 40.0 35.0 570 45

4 23.0 3.8 65.3 63.3 55.8 52.8 40.0 23.0 552 45

8 24.5 5.3 60.8 58.8 49.7 46.7 40.0 16.9 547 45

10 25.0 6.0 59.3 57.3 47.8 44.8 40.0 15.0 545 45

16 25.0 7.6 56.3 54.3 43.7 40.7 38.0 10.9 543 45

20 25.0 8.5 54.8 52.8 41.8 38.8 37.0 9.0 542 45

25 24.3 9.5 53.3 51.3 39.8 36.8 36.0 7.0 541 45

31.25 23.6 10.7 51.9 49.9 37.9 34.9 35.1 5.1 540 45

62.5 21.5 15.4 47.4 45.4 31.9 28.9 32.0 n/s 539 45

100 20.1 19.8 44.3 42.3 27.8 24.8 30.0 n/s 538 45

200 18.0 29.0 39.8 37.8 21.8 18.8 27.0 n/s 537 45

250 17.3 32.8 38.3 36.3 19.8 16.8 26.0 n/s 536 45



FTP CATEGORY 6

Cross Section

1

2

3

4

5

6

7

1. Conductor

2. Insulation

3. Twisted Pair

4. Cross Filler


6. Drain Wire

7. Al/Mylar Tape

8. Jacket

8

Item Unit PVC/LSZH







Delay Skew ns 45


TemperatureRating



Minimum Bend Radius in.(mm) 1.0 (2.54)

PackagingType 305m(1000ft) Reel

Weight lb/kft(kg/km) 36 (54) (In case of 24AWG)

Materials



Jacket in.(mm) 0.287 (7.3) / 0.311 (7.9), PVC or LSZH (Low Smoke Zero Halogen)

Technical Data





5/20

Application

- Braid & Foil shield reduced electromagnetic interference (EMI) for optimal performance






- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),


- 52/155 Mb/s ATM

- ANSI X3.263: 100 Mb/s




Analog Video


- ANSI/TIA 568-C.2




(UL 1685/1666)


2002/95/EC

- UL 444

S/FTP Category 5e

Frequency

[MHz]

ReturnLoss

InsertionLoss



dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

ns/100m(Max.)

ns/100m(Max.)

1 20.0 2.0 65.3 62.3 63.8 60.8 570 45

4 23.0 4.1 56.3 53.3 51.8 48.8 552 45

8 24.5 5.8 51.8 48.8 45.7 42.7 547 45

10 25.0 6.5 50.3 47.3 43.8 40.8 545 45

16 25.0 8.2 47.2 44.2 39.7 36.7 543 45

20 25.0 9.3 45.8 42.8 37.8 34.8 542 45

25 24.3 10.4 44.3 41.3 35.8 32.8 541 45

31.25 23.6 11.7 42.9 39.9 33.9 30.9 540 45

62.5 21.5 17.0 38.4 35.4 27.9 24.9 539 45100 20.1 22.0 35.3 32.3 23.8 20.8 538 45



S/FTP CATEGORY 5E

Cross Section

1

2

3

4

6

5

7

1. Conductor

2. Insulation

3. Twisted Pair


5. Al/Mylar Tape6. Drain Wire

7. Tined Copper Braid

8. Jacket

8

Item Unit PVC/LSZH






Characteristic Impedance Ohms 100±15

Propagation Delay ns/100m 538@100MHz

Delay Skew ns 45


TemperatureRating






Materials




Technical Data





6/20

Application

- Braid & Foil shield reduced electromagnetic interference (EMI) for optimal performance






- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),



- 155 Mb/s, 1.2 Gb/s ATM

- ANSI X3.263: 100 Mb/s



- Digital Video


Analog Video


- ANSI/TIA 568-C.2- ANSI/TIA 862 (Building Automation)




(UL 1685/1666)


2002/95/EC

- UL 444

- KS C 3342

S/FTP Category 6

Fre-

quency

[MHz]

ReturnLoss

InsertionLoss



dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Max.)

dB/100m(Max.)

1 20.0 2.0 74.3 72.3 67.8 64.8 40.0 35.0 570 45

4 23.0 3.8 65.3 63.3 55.8 52.8 40.0 23.0 552 45

8 24.5 5.3 60.8 58.8 49.7 46.7 40.0 16.9 547 45

10 25.0 6.0 59.3 57.3 47.8 44.8 40.0 15.0 545 45

16 25.0 7.6 56.3 54.3 43.7 40.7 38.0 10.9 543 45

20 25.0 8.5 54.8 52.8 41.8 38.8 37.0 9.0 542 45

25 24.3 9.5 53.3 51.3 39.8 36.8 36.0 7.0 541 45

31.25 23.6 10.7 51.9 49.9 37.9 34.9 35.1 5.1 540 45

62.5 21.5 15.4 47.4 45.4 31.9 28.9 32.0 n/s 539 45

100 20.1 19.8 44.3 42.3 27.8 24.8 30.0 n/s 538 45200 18.0 29.0 39.8 37.8 21.8 18.8 27.0 n/s 537 45

250 17.3 32.8 38.3 36.3 19.8 16.8 26.0 n/s 536 45



S/FTP CATEGORY 6

Cross Section

1

2

3

5

4

7

6

8

1. Conductor

2. Insulation

3. Twisted Pair

4. Cross Filler

5. Polyester Tape (Optional)6. Al/Mylar Tape

7. Drain Wire

8. Tined Copper Braid

9. Jacket9

Item Unit PVC/LSZH







Delay Skew ns 45


TemperatureRating



Minimum Bend Radius in.(mm) 1.0 (2.54)


Weight lb/kft(kg/km) 45 (68) (In case of 24AWG)

Materials



Jacket in.(mm) 00.311 (7.9) / 0.318 (8.1), PVC or LSZH (Low Smoke Zero Halogen)

Technical Data





7/20

Application

- Protects against environmental elements that can cause electrical performance failures






- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),


- 52/155 Mb/s ATM

- ANSI X3.263: 100 Mb/s




Analog Video


- ANSI/TIA 568-C.2



- ICEA S-90-661 (Category 5e)

- NEC/CEC Type CM (UL 1685)


2002/95/EC

- UL 444

- KS C 3342

UTP Category 5e (Outdoor)

Frequency

[MHz]

ReturnLoss

InsertionLoss



dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

ns/100m(Max.)

ns/100m(Max.)

1 20.0 2.0 65.3 62.3 63.8 60.8 570 45

4 23.0 4.1 56.3 53.3 51.8 48.8 552 45

8 24.5 5.8 51.8 48.8 45.7 42.7 547 45

10 25.0 6.5 50.3 47.3 43.8 40.8 545 45

16 25.0 8.2 47.2 44.2 39.7 36.7 543 45

20 25.0 9.3 45.8 42.8 37.8 34.8 542 45

25 24.3 10.4 44.3 41.3 35.8 32.8 541 45

31.25 23.6 11.7 42.9 39.9 33.9 30.9 540 45

62.5 21.5 17.0 38.4 35.4 27.9 24.9 539 45100 20.1 22.0 35.3 32.3 23.8 20.8 538 45



UTP CATEGORY 5E OUTDOOR

Cross Section

1. Self Supporting Part

2. Conductor

3. Insulation

4. Twisted Pair5. Rip Cord(Optional)

6. Jacket

Type A Type B

4

5

2

3

1

Item Unit PVC/LSZH






Characteristic Impedance Ohms 100±15

Propagation Delay ns/100m 538@100MHz

Delay Skew ns 45


TemperatureRating




PackagingType 305m(1000ft) Reelex/Reel


Materials




Technical Data

2 3

4

5

6 6





8/20

Application

- Protects against environmental elements that can cause electrical performance failures






- RoHS Compliant

Description:

- IEEE 802.3: 1000 BASE-T

(Gigabit Ethernet),



- 155 Mb/s, 1.2 Gb/s ATM

- ANSI X3.263: 100 Mb/s



- Digital Video


Analog Video


- ANSI/TIA 568-C.2- ANSI/TIA 862 (Building Automation)



- NEC/CEC Type CM (UL1685)


2002/95/EC

- UL 444

- KS C 3342

UTP Category 6 (Outdoor)

Fre-

quency

[MHz]

ReturnLoss

InsertionLoss



dB/100m(Min.)

dB/100m(Max.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Min.)

dB/100m(Max.)

dB/100m(Max.)

1 20.0 2.0 74.3 72.3 67.8 64.8 40.0 35.0 570 45

4 23.0 3.8 65.3 63.3 55.8 52.8 40.0 23.0 552 45

8 24.5 5.3 60.8 58.8 49.7 46.7 40.0 16.9 547 45

10 25.0 6.0 59.3 57.3 47.8 44.8 40.0 15.0 545 45

16 25.0 7.6 56.3 54.3 43.7 40.7 38.0 10.9 543 45

20 25.0 8.5 54.8 52.8 41.8 38.8 37.0 9.0 542 45

25 24.3 9.5 53.3 51.3 39.8 36.8 36.0 7.0 541 45

31.25 23.6 10.7 51.9 49.9 37.9 34.9 35.1 5.1 540 45

62.5 21.5 15.4 47.4 45.4 31.9 28.9 32.0 n/s 539 45

100 20.1 19.8 44.3 42.3 27.8 24.8 30.0 n/s 538 45200 18.0 29.0 39.8 37.8 21.8 18.8 27.0 n/s 537 45

250 17.3 32.8 38.3 36.3 19.8 16.8 26.0 n/s 536 45



UTP CATEGORY 6 OUTDOOR

Cross Section

1. Self Supporting Part

2. Conductor

3. Insulation

4. Twisted Pair

5. Cross Filler

6. Rip Cord(Optional)

7. Jacket

6

3 54

2

Type A Type B

1

Item Unit PVC/LSZH







Delay Skew ns 45


TemperatureRating




PackagingType 305m(1000ft) Reelex/Reel

Weight lb/kft(kg/km) 27(42) (In case of 24AWG)

Materials



Jacket in.(mm) 0.228(5.8) / 0.243(6.2), UV-and Abrasion-Resistant PVC

Technical Data

7 7

6

4

2

53





9/20

Construction

- Conductor: Annealed plain copper solid conductor

- Insulation: Solid polyethylene

- Cable Element: Two insulated conductors uniformly twisted together to form a pair

- Cable Assembly: Pairs are assembled together in concentric layers

- Filling Compound: Water resistant filling compound applied to the air space within the cable core

- Core Wrapping: Non-hygroscopic tape applied over the cable assembly

- Inner Sheath: Polyethylene

- Shield : Double Copper tape

- Intermediate Sheath: Medium Density Polyethylene

- Armouring: Double helically applied steel tapes

- Outer Sheath: Polyethylene or flame retardant PVC complied with IEC 60332 part1

Description:

Pilot cables are used for control,

protection, signaling, telecommu-

nications and data transmission

purposes associated with power

distribution and transmission

systems.

Such systems are mainly operated

by the electrical supply industry

and similar applications occur in

many industrial systems.

Pilot cables are insulated with

special materials which are

designed to protect them from

the danger of induced voltages

coming from other cable circuitsin close proximity (for example,

faults in high voltage power cable

circuits).

An over voltage in the pilot cable

cores may compromise alarm

systems, prevent the proper op-

eration of protection equipment,

resulting in severe damage to the

power system.

Pilot Cable

Item Unit Value

Maximum average DC resistance of conductor /km 10.5

Maximum mutual capacitance nF/km 54

Maximum pair-to-pair capacitance unbalance pF/500m 275

Propagation constant phase shift (beta) radians at 1 kHz rad/km Approx. 0.061

Attenuation constant (alpha) dB at 1 kHz dB/km Approx. 0.52

Real/imaginary part of impedance at 1 kHz /km Approx. 3.3 / 54.4

Modulus of impedance at 1kHz Approx. 0.36

Number of Pairs Conductor Size [mm2] Average Outer Diameter [mm] Net Weight [Kg/km]

10 1.5 40 2300

Electrical Characteristics at 20℃

Physical Characteristics

ILJIN ELECTRIC SIGNAL CABLE

PILOT CABLE

Cross Section

5

6

7

8

9

10

11

1 2 3

4 1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Filling Compound

6. Core Wrapping

7. Inner Sheath

8. Shield

9. Intermediate Sheath

10. Armouring11. Outer Sheath


The above all characteristics of ILJIN Signal Cable can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or


Application

- Electric power distribution/transmission system


10/20

Application

Construction

- Electric power distribution/transmission system



- Cable Element: Two insulated conductors uniformly twisted together to form a pair

- Cable Assembly: Pairs are assembled together in concentric layers (with binder tape (Optional))

- Filling Compound: Water resistant filling compound applied to the air space within the cable core



- Shield: Double copper tape

- Lead Alloy Sheath: Lead alloy sheath

- Armouring: Double helically applied steel tapes


Description:

Supervisory/Telephone cables

are used for control, protection,

signaling, telecommunications

and data transmission purposes

associated with power distribution

and transmission systems.

Such systems are mainly operated

by the electrical supply industry

and similar applications occur in

many industrial systems.

Supervisory / Telephone cables

are insulated with special materi-

als which are designed to protect

them from the danger of induced

voltages coming from other cablecircuits in close proximity (for

example, faults in high voltage

power cable circuits).

An over voltage in the Supervi-

sory/Telephone cable cores may

compromise alarm systems,

prevent the proper operation of

protection equipment, resulting

in severe damage to the power

system.

Supervisory/Telephone Cable

Item Unit Value

Maximum average DC resistance of conductor /km 10.5

Maximum mutual capacitance nF/km 54

Maximum pair-to-pair capacitance unbalance pF/500m 275

Propagation constant phase shift (beta) radians at 1 kHz rad/km Approx. 0.061

Attenuation constant (alpha) dB at 1 kHz dB/km Approx. 0.52

Real/imaginary part of impedance at 1 kHz /km Approx. 3.3 / 54.4

Modulus of impedance at 1kHz Approx. 0.36

Number of Pairs Conductor Size [mm2] Average Outer Diameter [mm] Net Weight [Kg/km]

20 1.5 57 6800




SUPERVISORY/TELEPHONE CABLE

Cross Section

5

6

7

8

9

10

11

1 2 3

4 1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Filling Compound

6. Core Wrapping

7. Inner Sheath

8. Shield

9. Lead Alloy Sheath

10. Armouring11. Outer Sheath


The above all characteristics of ILJIN Signal Cable can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or



11/20

Construction



- Cabling Element: Four insulated conductors uniformly twisted together to form a quad

- Cable Assembly: Quads are helically stranded to get the cable core



- Shield: Corrugated copper tape

- Intermediate Sheath: Polyethylene

- Armouring: Double helically applied steel tape


Description:

The cables are designed for con-

nection between traffic control

centers and equipment shelters

along the trackside.

The cables are specially designed

to give good induction protection.

(R.F=0.2 at inductive voltage

100V/km) and are suitable for

installation in high speed railway

lines electrified at 25kV AC.

ZCO3 (Railway Control & Signaling Cable)

Number of Quad Conductor Size [mm2] Insulated Core [mm] Average Outer Diameter [mm] Net Weight [Kg/km]

4 1 2.3 28.0 1,463


frequency R (mΩ/m) L ( H/m) G (nS/m) C (pF/m)

2040 Hz 35.424±4% 0.8157±4% < 10 < 40

2400 Hz 35.469±4% 0.8124±4% < 10 < 40

2760 Hz 35.509±4% 0.8097±4% < 11 < 40

3120 Hz 35.558±4% 0.8074±4% < 11 < 40

62.5 kHz 54.33±4% 0.747±4% < 580 < 40

125 kHz 75.35±4% 0.7225±4% < 1248 < 40

Item Unit Value

Conductor resistance Ω/km 18.1

Insulation resistance MΩ∙km ≥5000

Voltage strength (Conductor to Conductor)(DC voltage 3min.) kV 4.5

Inductive voltage(V/km, at 60Hz) 50 70 100 370 400 470

Reduction coefficient 0.42 0.30 0.20 0.16 0.18 0.31


Reduction Coefficient

Line Constant


ZC03 RAILWAY CONTROL & SIGNALING CABLE

Cross Section

5

6

7

8

9

10

1 2 3

4

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Core Wrapping

6. Inner Sheath

7. Shield


9. Armouring

10. Outer Sheath


The above all characteristics of ILJIN Railway Control & Signaling Cable can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or


Standard Compliances:

- SNCF CT 445

- NF F 55-698

Application

- Automatic Train Control (ATC) system

- Used for signaling circuits in railway networks

- Connects the signaling equipment centre to the track-side equipment


12/20

* 2P cables assembly : star quad.

Construction



- Cable Element: Two insulated conductors are uniformly twisted together to form a pair

- Core Assembly: Pairs are helically stranded to form the cable core





- Outer Sheath: General PVC or flame retardant PVC complied with IEC 60332 part1 (Halogen-Free optional)

Description:

The cables are designed for con-

nection between traffic control

centers and equipment shelters

along the trackside. The cables

are specially designed to give

good induction protection and are

suitable for installation in high

speed railway lines electrified at

25kV AC.


- SNCF CT 445

- NF C 32070 Category C2 /IEC 60332-1-2

- NF C 32070 Category C1 /

IEC 60332-3-24 (optional)

ZPFU (Railway Control & Signaling Cable)

Item Unit Value

Conductor resistance /km 18.1

Insulation resistance M∙km ≥5000


Mutual capacitance (Pair to Pair) nF/km ≤55

Number of Pairs Conductor Size [mm2] Insulated Core [mm] Average Outer Diameter [mm] Net Weight [Kg/km]

2 1 2.3 15.1 441

4 1 2.3 19.3 652

7 1 2.3 23.0 951

14 1 2.3 28.0 1,364

21 1 2.3 32.3 1,750

28 1 2.3 36.0 2,116




ZPFU RAILWAY CONTROL & SIGNALING CABLE

Cross Section

5

6

7

8

9

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Core Wrapping

6. Inner Sheath


8. Armouring

9. Outer Sheath

1 2 3 4




Application




13/20

* Optional version ZPAU 2p x 1 mm2 , 2P x 1.5 mm2 and 1P X 5 mm2 are available for specific networks.

Construction



- Cable Element: Two insulated conductors are uniformly twisted to form a pair

- Core Assembly: Pairs are helically stranded to form the cable core



- Shield: Corrugated copper tape



- Outer Sheath: General PVC or flame retardant PVC complied with IEC 60332 part1 (Halogen-Free optional)

Description:

The cables are designed for

connection between traffic

control centers and equipment

shelters along the trackside. The

cables are specially designed to

give good induction protection

(R.C=0.26 at inductive voltage

100V/km) and are suitable for

installation in high speed railway

lines electrified at 25kV AC.


- SNCF CT 445

- NF F 55-698- NF C 32070 Category C2 /

IEC 60332-1-2

- NF C 32070 Category C1 /

IEC 60332-3-24 (optional)

ZPAU (Railway Control & Signaling Cable)

Item Unit Value

Conductor resistance /km 18.1

Insulation resistance M∙km ≥5000


Mutual capacitance (Pair to Pair) nF/km ≤55

Number of Pairs Conductor Size [mm2] Insulated Core [mm] Average Outer Diameter [mm] Net Weight [Kg/km]

4 1 2.3 22.8 1,028

7 1 2.3 25.7 1,268

14 1 2.3 30.7 1,730

21 1 2.3 35.0 2,161

28 1 2.3 38.7 2,562



Inductive voltage (V/km, at 60Hz) 28 32 37 42 47 54 70 80 100 120 170 225

Reduction coefficient 0.75 0.70 0.60 0.50 0.40 0.35 0.30 0.28 0.26 0.24 0.25 0.25

Reduction Coefficient


ZPAU RAILWAY CONTROL & SIGNALING CABLE

Cross Section

6

5

7

8

9

10

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Core Wrapping

6. Inner Sheath

7. Shield


9. Armouring

10. Outer Sheath

1 2 3 4




Application




14/20

Construction


- Insulation: Dual insulation consisting of an inner layer of foamed polyethylene surrounded by a solid

polyethylene skin, color-coded in accordance with telephone industry standards

- Cable Element: Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk- Core Assembly: Pairs are assembled together in a single or multi group

- Core Wrapping: Non-hygroscopic dielectric tape applied longitudinally or helically with an overlap

- Shield: Copolymer-coated aluminum tape applied longitudinally with an overlap

- Outer Sheath: Polyethylene

Description:

Foam Skin PE insulated Local

Cables are designed for duct instal-

lation, mainly used in underground

local network connecting exchange

office and cross connection cabinet.

Thin wall thickness of foam Skin

PE insulation, combined with dry

gas pressurization of the core,

preserves the compactness of cable

with good electrical performance.

Foam Skin Duct Cable (Air Core)

Conductor Size 0.4mm 0.5mm 0.65mm 0.9mm

Maximum Conductor Resistance (/km) 147.5 93.5 56.5 29.0

Resistance

Unbalance (%)

Ave. Max. 2.0 1.5 1.5 1.5

Ind. Max. 5.0 5.0 4.0 4.0

Dielectric Strength(kV/3sec.)

- Conductor to Conductor DC 1.0 DC 1.2 DC 1.5 DC 1.5

- Conductor to Ground DC 5.0 DC 5.0 DC 10.0 DC 10.0

Ave. Mutual Capacitance (at 1kHz) Max. Ave. 52 ± 2 nF/km

Capacitance

Unbalance(at 1kHz)Pair-Pair Aver. Max. : 45.3 pF/km Ind. Max. : 145 pF/km

Pair-Ground Ave. Max. : 574 pF/km Ind. Max. : 2,625 pF/km

Insulation Resistance Min. 10,000 M/km

Attenuation

Nom. (dB/km)

1kHz 1.9 1.5 1.2 0.85

150kHz 12.9 9.2 7.0 5.4

772kHz 25.9 20.7 16.7 13.0


Frequency

(kHz)

Far End Crosstalk (FEXT) Near End Crosstalk (NEXT)Mean Power Sum Worst Pair Power Sum Mean Power Sum Worst Power Sum

0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9

150 61 63 63 65 57 57 57 59 58 53

772 47 49 49 49 43 43 43 45 47 42

1,600 41 42 43 44 37 37 37 39 43 38

3,150 35 37 37 39 31 31 31 33 38 33

6,300 29 31 31 33 25 25 25 27 34 29

Crosstalk Loss (dB/305m)

ILJIN ELECTRIC TELECOMMUNICATION CABLE

FOAM SKIN DUCT CABLE AIR CORE

Cross Section

6

5

7

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Core Wrapping

6. Shield

7. Outer Sheath

1 2 3 4

Conductor Size [No/mm] Number of Pairs Conductor Size [mm] Number of Pairs

0.4 15 ~ 3600 0.5 10 ~2400

0.65 15 ~ 1200 0.9 25 ~ 900


1 2 3


The above all characteristics of ILJIN Telecommunication C able can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or


Application:

- Pressurized urban under-

ground duct installation

- Central offices where duct

congestion is a prime concern


15/20

Construction


- Insulation: Dual insulation consisting of an inner layer of foamed polyethylene surrounded by a solid

polyethylene skin, color-coded in accordance with telephone industry standards

- Cable Element: Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk- Core Assembly: Pairs are assembled together in a single or multi group

- Filling Compound: The entire core assembly is completely filled with ETPR compound,

filling the interstices between the pairs and under the core tape

- Core Wrapping: Non-hygroscopic dielectric tape applied longitudinally or helically with an overlap

- Shield: Copolymer-coated aluminum tape applied longitudinally with an overlap

- Outer Sheath: Polyethylene

Description:






Thin wall thickness of foam Skin

PE insulation, combined with dry

gas pressurization of the core,

preserves the compactness of cable

with good electrical performance.

Foam Skin Duct Cable (Jelly Filled)



Resistance

Unbalance (%)

Ave. Max. 2.0 1.5 1.5 1.5

Ind. Max. 5.0 5.0 4.0 4.0





Capacitance




Attenuation

Nom. (dB/km)

1kHz 1.9 1.5 1.2 0.85

150kHz 12.2 8.9 6.4 4.8

772kHz 23.6 19.8 15.1 11.1


Frequency

(kHz)

Far End Crosstalk (FEXT) Near End Crosstalk (NEXT)Mean Power Sum Worst Pair Power Sum Mean Power Sum Worst Power Sum

0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9

150 61 63 63 65 57 57 57 59 58 53

772 47 49 49 49 43 43 43 45 47 42

1,600 41 42 43 44 37 37 37 39 43 38

3,150 35 37 37 39 31 31 31 33 38 33

6,300 29 31 31 33 25 25 25 27 34 29



FOAM SKIN DUCT CABLE JELLY FILLED

Cross Section

5

7

6

8

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Filling Compound

6. Core Wrapping

7. Shield

8. Outer Sheath

1 2 3 4

Conductor Size [mm] Number of Pairs Conductor Size [mm] Number of Pairs

0.4 10 ~ 3000 0.5 5 ~ 1800

0.65 3 ~ 1200 0.9 5 ~ 600


1 2 3


The above all characteristics of ILJIN Telecommunication Cable can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or


Application:

- Pressurized urban under-ground duct installation

- Central offices where duct

congestion is a prime concern

- Duct installations where

protection against water and

moisture entry is required


16/20

Construction

- Conductor: Annealed plain copper solid conductor- Insulation: Dual insulation consisting of an inner layer of foamed polyethylene surrounded by

a solid polyethylene skin, color-coded in accordance with telephone industry standards- Cable Element: Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk- Core Assembly: Pairs are assembled together in a single or multi group- Core Wrapping: Non-hygroscopic dielectric tape applied longitudinally or helically with an overlap- Shield: Copolymer-coated aluminum tape applied longitudinally with an overlap- Support Messenger: Stranded, extra high strength galvanized steel wire, fully flooded for corrosion protection- Outer Sheath: Polyethylene

Support messenger to form a “Figure 8” configuration

Description:






Thin wall thickness of foam Skin PE

insulation, combined with dry gas

pressurization of the core, preserves

the compactness of cable with good

electrical performance.

Foam Skin Self Supporting Cable (Air Core)



Resistance

Unbalance (%)

Ave. Max. 2.0 1.5 1.5 1.5

Ind. Max. 5.0 5.0 4.0 4.0





Capacitance




Attenuation

Nom. (dB/km)

1kHz 1.9 1.5 1.2 0.85

150kHz 12.9 9.2 7.0 5.4

772kHz 25.9 20.7 16.7 13.0


Frequency

(kHz)

Far End Crosstalk (FEXT) Near End Crosstalk (NEXT)

Mean Power Sum Worst Pair Power Sum Mean Power Sum Worst Power Sum

0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9

150 61 63 63 65 57 57 57 59 58 53772 47 49 49 49 43 43 43 45 47 421,600 41 42 43 44 37 37 37 39 43 383,150 35 37 37 39 31 31 31 33 38 336,300 29 31 31 33 25 25 25 27 34 29



FOAM SKIN SELF SUPPORTING CABLE AIR CORE

Cross Section

6

7

1

8

1. Support Messenger

2. Conductor

3. Insulation

4. Cable Element

5. Cable Assembly

6. Core Wrapping

7. Shield

8. Outer Sheath

3 4 5


0.4 15 ~ 300 0.5 10 ~ 300

0.65 10 ~ 400 0.9 25 ~ 100


2 3 4




2Application: - Aerial installation


17/20

Frequency

(kHz)



0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9

150 61 63 63 65 57 57 57 59 58 53

772 47 49 49 49 43 43 43 45 47 42

1,600 41 42 43 44 37 37 37 39 43 38

3,150 35 37 37 39 31 31 31 33 38 33

6,300 29 31 31 33 25 25 25 27 34 29

Construction


a solid polyethylene skin, color-coded in accordance with telephone industry standards- Cable Element: Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk- Core Assembly: Pairs are assembled together in a single or multi group- Filling Compound: The entire core assembly is completely filled with ETPR compound, filling the interstices

between the pairs and under the core tape- Core Wrapping: Non-hygroscopic dielectric tape applied longitudinally or helically with an overlap- Shield: Copolymer-coated aluminum tape applied longitudinally with an overlap- Support Messenger: Stranded, extra high strength galvanized steel wire, fully flooded for corrosion protection- Outer Sheath: Polyethylene

Support messenger to form a “Figure 8” configuration

Description:











Foam Skin Self Supporting Cable (Jelly Filled)

Conductor Size 0.4mm 0.5mm 0.65mm 0.9mmMaximum Conductor Resistance (/km) 147.5 93.5 56.5 29.0

ResistanceUnbalance (%) Ave. Max. 2.0 1.5 1.5 1.5Ind. Max. 5.0 5.0 4.0 4.0




Ave. Mutual Capacitance (at 1kHz) Max. Ave. 52 ± 2 nF/kmCapacitance




Attenuation

Nom. (dB/km)

1kHz 1.9 1.5 1.2 0.85

150kHz 12.2 8.9 6.4 4.8

772kHz 23.6 19.8 15.1 11.1




FOAM SKIN SELF SUPPORTING CABLE JELLY FILLED

Cross Section

7

6

8

9

1. Support Messenger

2. Conductor

3. Insulation

4. Cable Element

5. Cable Assembly

6. Filling Compound

7. Core Wrapping

8. Shield

9. Outer Sheath

2 3 4 5

1


0.4 10 ~ 300 0.5 3 ~ 300

0.65 5 ~ 200 0.9 25


2 3 4




Application: - Aerial installation where

protection against water and

moisture entry is required


18/20

Construction


a solid polyethylene skin, color-coded in accordance with telephone industry standards- Cable Element: Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk- Core Assembly: Pairs are assembled together in a single or multi group- Core Wrapping: Non-hygroscopic dielectric tape applied longitudinally or helically with an overlap- Shield: Copolymer-coated aluminum tape applied longitudinally or helically with an overlap- Inner Sheath: Polyethylene- Armouring: Galvanized steel tape applied helically over the inner sheath- Outer Sheath: Polyethylene

Description:











- The addition of the steel tape ar-

mor provides increased mechanical

protection and gopher resistance

Foam Skin Direct Buried Cable (Air Core)



Resistance

Unbalance (%)

Ave. Max. 2.0 1.5 1.5 1.5

Ind. Max. 5.0 5.0 4.0 4.0





Capacitance




Attenuation

Nom. (dB/km)

1kHz 1.9 1.5 1.2 0.85

150kHz 12.9 9.2 7.0 5.4

772kHz 25.9 20.7 16.7 13.0


Frequency

(kHz)



0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9

150 61 63 63 65 57 57 57 59 58 53

772 47 49 49 49 43 43 43 45 47 42

1,600 41 42 43 44 37 37 37 39 43 38

3,150 35 37 37 39 31 31 31 33 38 33

6,300 29 31 31 33 25 25 25 27 34 29



FOAM SKIN DIRECT BURIED CABLE AIR CORE

Cross Section

5

7

6

8

9

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Core Wrapping

6. Shield

7. Inner Sheath8. Armouring

9. Outer Sheath

1 2 3 4


0.4 25 ~ 600 0.5 25 ~ 2400

0.65 25 ~ 1200 0.9 25 ~ 900


1 2 3




Application: - Direct buried installations


19/20

Construction


a solid polyethylene skin, color-coded in accordance with telephone industry standards- Cable Element: Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk- Core Assembly: Pairs are assembled together in a single or multi group- Filling Compound: The entire core assembly is completely filled with ETPR compound, filling the interstices

between the pairs and under the core tape- Core Wrapping: Non-hygroscopic dielectric tape applied longitudinally or helically with an overlap- Shield: Copolymer-coated aluminum tape applied longitudinally or helically with an overlap- Inner Sheath: Polyethylene- Armouring: Galvanized steel tape applied helically over the inner sheath- Outer Sheath: Polyethylene

Description:











- The addition of the steel tape ar-

mor provides increased mechanical

protection and gopher resistance

Foam Skin Direct Buried Cable (Jelly Filled)



Resistance

Unbalance (%)

Ave. Max. 2.0 1.5 1.5 1.5

Ind. Max. 5.0 5.0 4.0 4.0Dielectric Strength(kV/3sec.)




Capacitance




Attenuation

Nom. (dB/km)

1kHz 1.9 1.5 1.2 0.85

150kHz 12.2 8.9 6.4 4.8

772kHz 23.6 19.8 15.1 11.1


Frequency

(kHz)



0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9 0.4 0.5 0.65 0.9

150 61 63 63 65 57 57 57 59 58 53772 47 49 49 49 43 43 43 45 47 421,600 41 42 43 44 37 37 37 39 43 383,150 35 37 37 39 31 31 31 33 38 336,300 29 31 31 33 25 25 25 27 34 29



FOAM SKIN DIRECT BURIED CABLE JELLY FILLED

Cross Section

6

5

8

7

9

10

1. Conductor

2. Insulation

3. Cable Element

4. Cable Assembly

5. Filling Compound

6. Core Wrapping

7. Shield

8. Inner Sheath

9. Armouring

10. Outer Sheath

1 2 3 4


0.4 12 ~ 600 0.5 5 ~ 600

0.65 3 ~ 400 0.9 5 ~ 400


1 2 3




Application: - Direct buried installations

where protection againstwater and moisture entry isrequired


20/20

Construction

- Conductor: Annealed plain copper stranded conductor

- Insulation: XLPE

- Fiber optic: Single mode (G.652) or Multi mode (50㎛, 62.5㎛)

- Filling Compound:The fiber optic core assembly is completely filled with ETPR compound under the tube- Tube: Loose tube type (PBT)

- Core Assembly: Wires are assembled together in a single

- Core Wrapping: Non-hygroscopic dielectric tape applied longtudinally or helically with an overlap

- Outer Sheath: Frame retardant halogen free po lyolefin

Description:

ILJIN composite cable is suitable

for all power limited applications

where optical fibers are needed.


- IEC 60228

- IEC 60332-1

- IEC 60502-1

OPTICAL FIBER & POWER WIRE COMPOSITE CABLEILJIN ELECTRIC COMPOSITE CABLE

Cross Section

6

7

8

9

1

3 4 5

2

1. Conductor 2. Insulation 3. Fiber Optic 4. Filling Compound 5. Tube 6. Filler 7. Core Assembly 8. Core Wrapping 9. Outer Sheath

IndexFiber

Count

Power Wire(Nom) Ground Wire(Nom) Thick-ness ofJacket

[mm]

AverageOuter Di-ameter

[mm]

Conduct

Size[mm2]

Wire No./

Diameter[EA/mm]

Insulation

Thickness[mm]

No.

[EA]

Conduct

Size[mm2]

Insulation

Thickness[mm]

No.

[EA]2C+4SQMM 2

4 7/0.85 1.2 2 4 1.2 1 1.8 16.0

4C+4SQMM 4

6C+4SQMM 6

8C+4SQMM 8

12C+4SQMM 12

2C+6SQMM 2

6 7/1.04 1.2 2 4 1.49 1 1.8 17.0

4C+6SQMM 4

6C+6SQMM 6

8C+6SQMM 8

12C+6SQMM 12

2C+10SQMM 2

10 7/1.35 1.0 2 4 1.75 1 1.8 19.0

4C+10SQMM 4

6C+10SQMM 6

8C+10SQMM 8

12C+10SQMM 122C+16SQMM 2

16Compact

Conductor 1.0 2 4 2.08 1 1.8 20.0

4C+16SQMM 4

6C+16SQMM 6

8C+16SQMM 8

12C+16SQMM 12

2C+25SQMM 2

25Compact

Conductor 0.95 2 6 2.34 1 1.8 21.5

4C+25SQMM 4

6C+25SQMM 6

8C+25SQMM 8

12C+25SQMM 12

2C+35SQMM 2

35Compact

Conductor 0.95 2 6 2.89 1 1.8 24.0

4C+35SQMM 4

6C+35SQMM 6

8C+35SQMM 8

12C+35SQMM 1212C+50SQMM 12 50

CompactConductor

1.06 2 10 3.09 1 1.8 27.0


SizeMaximum Conductor

Resistance [/km]Withstand Voltage

[kV/1min]Minimum InsulationResistance [M/km]

4SQMM 4.61

3.5 3.67 (@90℃)

6SQMM 3.08

10SQMM 1.83

16SQMM 1.15

25SQMM 0.727

35SQMM 0.524

50SQMM 0.387


The above all characteristics of ILJIN Composite Cable can be tailored to meetyour precise specifications. Whatever your requirements, if you need more information or

Application: - Power over Ethernet (PoE+)

length extension

- Combining control and

communication in industrial

pathways

- Common pathway for fiber

backbone and Class 3 power

supply

- 10BASE-FL

- 100BASE-SX/100BASE-FX

iljin telecommunication cables

Documents