ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ...
TRANSCRIPT
![Page 1: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/1.jpg)
بسم ا الرمحن الرحيم
![Page 2: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/2.jpg)
LecturerAhmed H. Hadi
Training package inIntroduction
For students of second class
Ministry of Higher Education and Scientific ResearchFoundation of Technical Education
Technical College / Al-Najaf
![Page 3: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/3.jpg)
1 / B –Rationale :-
Elements of a communication system.
/ Over view1/ Over view1
1 / A –Target population :-For students of second class inCommunications Techniques Engineering Department
![Page 4: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/4.jpg)
1 / C –Central Idea :-• Define System• Elements of a communication system.
1 / C –Central Idea :-• Define System• Elements of a communication system.
:Objectives–/ D1
• Define System• Define Signal• Designation of Frequencies
:Objectives–/ D1
• Define System• Define Signal• Designation of Frequencies
![Page 5: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/5.jpg)
2/ Pre test :-2/ Pre test :-
2. Very High Frequency (VHF) is
(a) 3-30 MHz (b) 30-300 MHz (c) 3-30 GHz
2. Very High Frequency (VHF) is
(a) 3-30 MHz (b) 30-300 MHz (c) 3-30 GHz
Multiple Choice Questions With Answer
١١1. Voice Frequency (VF) is
(a) 30-300 MHz (b) 3-30 kHz (c) 300-3 kHz
1. Voice Frequency (VF) is
(a) 30-300 MHz (b) 3-30 kHz (c) 300-3 kHz
٢٢
![Page 6: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/6.jpg)
Introduction to communication systemsFerrel G. Stremler
1-
Communication Systems (Analog and Digital)By Sanjay Sharma
2-
Analog CommunicationA. P. GodseU. A. Bakshi
3-
Communication Theory and systemsT. R. Ganesh Babu, and G. Srinivasan:
4.
3/ Performance Objectives :-3/ Performance Objectives :-
ReferencesReferences
![Page 7: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/7.jpg)
DetailsThe week
Periodic and aperiodic signals, even and oddsignals, energy and power signals
1
Singularity functions: Unit impulse function;unit step function; Unit ramp function
2
Fourier series: Trigonometric Fourier series,complex Fourier exponential series
3
Fourier transform: properties of Fouriertransform
4
convolution and impulses system response andfilters
5
Parseval's theorem for energy signals.6
Noise: Band-limited white noise; thermal noise;Shot noise, noise figure.
7-8
SyllabusSyllabus
![Page 8: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/8.jpg)
Amplitude modulation: Amplitude modulationsuppressed carrier, generation of DSB-SC signals,demodulation (detection) of DSB-SC signals
9-10
Amplitude modulation: Amplitude modulation largecarrier (AM), the AM spectrum, carrier and sidebandpower in AM, generation of DSB-LC signals,demodulation (detection) of DSB-LC signals
11-12
Single-sideband (SSB) modulation, generation of SSBsignals, demodulation of SSB signals
13-14
Frequency-division multiplexing (FDM)15
Angle modulation: FM and PM, narrowband FM,wideband FM, FM spectral analysis, FM bandwidth,general approximations
16-219
![Page 9: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/9.jpg)
Phase modulation20
Generation of wideband FM signals: Indirect FM, directFM, Demodulation of FM signals
21-22
Phase modulation: the PM spectrum PM, PM transmitter.23
Noise in CW modulation: system models and parameters;interference noise in linear modulation ;noise inexponential modulation; comparison of CW modulationsystem
24-25
Sampling and pulse modulation: sampling theory andpractice, pulse modulation: Pulse amplitude modulation(PAM)
26
Time-division multiplexing (TDM)27
Pulse duration modulation (PDM), PDM and Pulseposition modulation (PPM)
28
Pulse code modulation (PCM), Delta Modulation (DM),and Differential Pulse Code Modulation (DPCM)
29-30
![Page 10: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/10.jpg)
![Page 11: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/11.jpg)
![Page 12: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/12.jpg)
DESIGNATION OF FREQUENCIES
30-300 Hz Extremely Low Frequency (ELF)
300-3 kHz Voice Frequency (VF)
3-30 kHz Very Low Frequency (VLF)
30-300 kHz Low Frequency (LF)
300-3 MHz Medium Wave Frequency (MW)
3-30 MHz Short Wave Frequency (SW)
30-300 MHz Very High Frequency (VHF)
300-3000 MHz MHz Ultra High Frequency (UHF)
3-30 GHz Super High Frequency (SHF)
30-300 GHz Extremely High Frequency (EHF)
![Page 13: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/13.jpg)
Introduction
Irrespective of the form of communication process beingconsidered, there are three basic elements to everycommunication system, namely, transmitter, channel, andreceiver, as depicted in Figure below. The transmitter islocated at one point in space, the receiver is located atsome other point separate form the transmitter, and thechannel is the physical medium that connects them.
Introduction
Irrespective of the form of communication process beingconsidered, there are three basic elements to everycommunication system, namely, transmitter, channel, andreceiver, as depicted in Figure below. The transmitter islocated at one point in space, the receiver is located atsome other point separate form the transmitter, and thechannel is the physical medium that connects them.
![Page 14: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/14.jpg)
The purpose of the transmitter is to convert themessage signal produced by the source of informationinto a form suitable for transmission over the channel.However, as the transmitted signal propagates along thechannel, it is distorted due to channel imperfections.Moreover, noise and interfering signals ( originatingfrom other sources ) are added to the channel output,with the result that the received signal is a corruptedversion of the transmitted signal. The receiver has thetask of operating on the received signal so as toreconstruct a recognizable form of the original message
signal for a user.
The purpose of the transmitter is to convert themessage signal produced by the source of informationinto a form suitable for transmission over the channel.However, as the transmitted signal propagates along thechannel, it is distorted due to channel imperfections.Moreover, noise and interfering signals ( originatingfrom other sources ) are added to the channel output,with the result that the received signal is a corruptedversion of the transmitted signal. The receiver has thetask of operating on the received signal so as toreconstruct a recognizable form of the original message
signal for a user.
![Page 15: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/15.jpg)
Figure: Elements of a communication system.Figure: Elements of a communication system.
![Page 16: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/16.jpg)
There are two basic modes of communication:
1. Broadcasting, which involves the use of a singlepower transmitter and numerous receivers that arerelatively inexpensive to build. Here information-bearing signals flow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a linkbetween a single transmitter and receiver. In thiscase, there is usually a bidirectional flow ofinformation-bearing signals, which requires theuse of transmitter and receiver at each end of thelink.
There are two basic modes of communication:
1. Broadcasting, which involves the use of a singlepower transmitter and numerous receivers that arerelatively inexpensive to build. Here information-bearing signals flow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a linkbetween a single transmitter and receiver. In thiscase, there is usually a bidirectional flow ofinformation-bearing signals, which requires theuse of transmitter and receiver at each end of thelink.
![Page 17: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/17.jpg)
١١
٢٢
Define the following terms
Signal
Quiz /Quiz /
System is a group of object that can interactharmoniously and that are combined in a mannerintended to achieve a desired objective.
is an event that serves, or at least is capable, to startsome action; i.e. it can incite action.
![Page 18: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/18.jpg)
-/ Post test :5
What are two basic modes of communication:What are two basic modes of communication:
1.Broadcasting, which involves the use of a single powertransmitter and numerous receivers that are relativelyinexpensive to build. Here information- bearing signalsflow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a link between asingle transmitter and receiver. In this case, there isusually a bidirectional flow of information-bearingsignals, which requires the use of transmitter andreceiver at each end of the link.
1.Broadcasting, which involves the use of a single powertransmitter and numerous receivers that are relativelyinexpensive to build. Here information- bearing signalsflow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a link between asingle transmitter and receiver. In this case, there isusually a bidirectional flow of information-bearingsignals, which requires the use of transmitter andreceiver at each end of the link.
![Page 19: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/19.jpg)
References:References:
11
2
T. R. Ganesh Babu, and G. Srinivasan:“ Communication Theory and systems”, 2006.
Sanjay Sharma: “Communication Systems(Analog and Digital) ”Sanjay Sharma: “Communication Systems(Analog and Digital) ”
![Page 20: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcnj.atu.edu.iq/wp-content/uploads/2019/10/A.-Introduction.pdfcommunication system, namely, transmitter, channel, and receiver, as depicted](https://reader030.vdocuments.mx/reader030/viewer/2022011820/5ea08f20e11c621c7f02f0fb/html5/thumbnails/20.jpg)
شكراً لكم شكراً لكم