icon product guide ul web 01

The Quality Connection

ICON® Product Guide PLTC / ITC Instrumentation and Control Cables

Telecommunication cables

Data- and Bus cables

(copper and fiber optic)

Mining cables

Cables for special applications

Instrumentation-

and control cables

Thermocouple extension

and compensating cables

Power cables

(low and medium voltage)

Product range

Table of contents

Table of contents

Introduction of Standards and Product Programme

Group 4: ICON® Instrumentation Cables acc. to UL

Common types UL listed as PLTC/ITC acc. to UL 13 / 2250 300 V Page E1

♦ Technical Data Page E2

♦ Construction Page E3

♦ Electrical Data Page E4

Common types UL listed as TC acc. to UL 1277 600 V

♦ Technical Data Page E6

♦ Construction Page E7

♦ Electrical Data Page E8

Group 5: ICON® Control Cables acc. to UL 1277

Common types 600 V Page F1

♦ Technical Data Page F2

♦ Construction Page F3

♦ Electrical Data Page F4

Conversion of General Units Page G1

Conductor Comparison AWG - Metric Page G2

Color code of standardized Product Programme Page G3

Identification of Instrumentation and Thermocouple Cables Page G4

Note:

LEONI Kerpen GmbH can not be held responsible in any form whatsover for any information provided by this publication.

Issue 20070924

LEONI KErpEN

LEONI KErpEN

Introduction of Standards and Product Programme

The Standards

The product programme “Instrumentation Cable ICON®“ covers products which are based

on the European standard EN 50288-7 and the US-American standards UL 13, UL 2250 and

UL 1277.

This product programme gives extensive coverage to the requirements of the different

Installation and Safety Regulations which are applied for measurement, control and monitoring

systems in industrial plants. As a result the user has a product programme at his disposal for

applications world wide.

EN 50288-7

The European standard EN 50288-7 represents the first standard for instrumentation cables

for onshore applications which has been created by a recognised international

standardisation organisation.

The future meaning of this standard will be underlined by the fact that it will

also become national standard in all CENELEC attached countries (at present

28). National standards conflicting with the EN-Standard will have to be

withdrawn after a transitional period.

UL 13, UL 2250 and UL 1277

Instrumentation, Control and Thermocouple extension cables according to

above standards have to be applied in those systems, where “Installation and

Safety regulations“ are based on the “National Electrical Code“ (NEC).

The NEC Handbook is published by the “National Fire Protection Association“ a leading

US standardisation for safety, particularly for fire protection. As installation guide it is

mandatory in the USA, however, it is also practised in some other countries.

Instrumentation, Control and Thermocouple extension cables

will thereby meet the following standards and types:

⇒ 300 V “Power Limited Tray Cable” (PLTC) acc. to UL 13

“Instrumentation Tray Cable”(ITC) acc. to UL 2250

⇒ 600 V “Tray Cable” (TC) acc. to UL 1277

LEONI KErpEN

PLTC / ITC CaBLES

LEONI KErpEN

LEONI KErpEN

Group4: InstrumentationCable

acc.toUL13/2250

ELEONI KErpEN

Instrumentation Cable acc. to UL 13 /2250

PLTC/ITC Common Types 300 V Single & Multipair and Multi-Triple, individual and/or collective shield, PVC-jacketunarmoured, armoured

Technical Data

Type of insulation/jacket PVCw/PVCw XLPE/PVCw

Type of cabling elements Pair, Triple, PiMF, TiMF Pair, Triple, PiMF, TiMF

No. of cabling elements 1, 2, 4, 6, 8, 10, 12, 16, 20, 24, 36 1, 2, 4, 6, 8, 10, 12, 16, 20, 24, 36

Conductor sizes AWG 20/7, AWG 18/7, AWG 16/7 AWG 20/7, AWG 18/7, AWG 16/7

1. Unarmoured types RE-Yw(St)Yw-fl RE-2X(St)Yw-fl

♦ Laying Recommended for indoor and outdoor installation, on

racks, trays, in conduits, in dry and wet locations

Recommended for indoor and outdoor installation, on

racks, trays, in conduits, in dry and wet locations

♦ Bending radius 7.5 x cable ∅ 7.5 x cable ∅

2. armoured types RE-Yw(St)YwSWAYw-fl --

♦ Laying Recommended for outdoor installation, on racks, trays,

in conduits, in dry and wet locations

--

♦ Bending radius 10 x cable ∅ --

Temperature range

♦ during operation

♦ during installation

- 30 °C up to 105 °C

- 5 °C up to 50 °C

- 30 °C up to 90 °C

- 5 °C up to 50 °C

Reaction to fire

♦ Flame propagation

a) Test on single cable

b) Test on bunched cables

IEC 60332-1

IEC 60332-3 part 24 (Cat. C), UL 13 vertical tray tested

Sunlight resistance UL 1581 Section 1200

Oil resistance ICEA S-82-552

application For transmission of analogue and digital signals in instrument and control systems; allowed for use in hazardous

classified locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct

connection to low impedance sources, e.g. public mains electricity supply

E LEONI KErpEN



Construction

Product Type Unarmoured Types Armoured Types

Conductor Plain annealed copper; 7 stranded acc. UL 13 Plain annealed copper; 7 stranded acc. UL 13

♦ size

♦ conductor design mm

AWG 20/7

7 x 0.320

AWG 18/7

7 x 0.404

AWG 16/7

7 x 0.510

Insulation materials ♦ Cross linked Polyethylene XLPE or

♦ Polyvinylchloride heat resistant PVCw

♦ Polyvinylchloride heat resistant PVCw

Cabling element 1)

♦ without ind. shield Pair, Triple

PiMF, TiMF

Pair, Triple

PiMF, TiMF♦ with ind. shield

Individual shield Aluminium/Plastic-tape over stranded tinned copper drain wire, plastic tape under and above shield

Wrapping at least one plastic tape above cable core at least one plastic tape above cable core

Overall shield Aluminium/Plastic tape over stranded tinned copper drain wire

Inner jacket -- PVC, black

armouring -- Galvanized steel wire armouring; wire ∅ depending

on cable-∅ under armouring, at least 0.9 mm

Outer jacket

Colour

PVCw

black or blue for intrisically safe systems

Marking LEONI KERPEN ICON ⋅NO. OF ELEmENTS ⋅SIzE ⋅TYPE OF SHIELd (UL) PLTC / ITC ⋅300 V ⋅TEmPERATURE

RATING ⋅SUN RES ⋅ LENGTH mARKING

1) Colour codes of cabling elements: see appendix II

ELEONI KErpEN



Electrical Data at 20°C 300 V

Properties Character Unit Values

Conductor sizes nom. mm² AWG 20/7 AWG 18/7 AWG 16/7

Conductor resistance max Ω/km 35.78 22.78 14.25

Insulation resistance at 15.6 °C

♦ PVCw -insulation min. MΩxkm 30.5 30.5 30.5♦ XLPE -insulation min. MΩxkm 810 810 810

Inductance max. mH/km 1 1 1

Mutual capacitance

♦ PVCw-insulation

Pair, Triple 1), 2) max. nF/km 132 132 132

PiMF, TiMF max. nF/km 187 187 187

♦ XLPE-insulation



Test voltage

♦ Core/core (Urms

) V 1500 1500 1500

♦ Core/shield (Urms

) V 1500 1500 1500

Operating voltage (Urms

) max. V 300 300 300

1) Values for cables with 1 element correspond to those for PimF and TimF resp.2) Values for cables with 2 up to 4 elements + 20%

E4 LEONI KErpEN

Group4: InstrumentationCable

acc.toUL1277

ELEONI KErpEN

Instrumentation Cable acc. to UL 1277

TC Common Types 600 V Single & Multipair and Multi-Triple, individual and/or collective shield, PVC-jacketunarmoured

Technical Data

Type of insulation/jacket PVCwNC/PVCw PVCw/PVCw XLPE/PVCw

Type of cabling elements Pair, Triple, PiMF, TiMF Pair, Triple, PiMF, TiMF Pair, Triple, PiMF, TiMF

No. of cabling elements 1, 2, 4, 6, 8, 12, 24, 36 1, 2, 4, 6, 8, 12, 24, 36 1, 2, 4, 6, 8, 12, 24, 36

Conductor sizes AWG 18/7, AWG 16/7, AWG 14/7 AWG 18/7, AWG 16/7, AWG 14/7 AWG 18/7, AWG 16/7, AWG 14/7

Unarmoured types RE-Yw4Y(St)Yw-fl RE-Yw(St)Yw-fl RE-2X(St)Yw-fl

♦ Laying Recommended for indoor and outdoor installation, on racks,trays, in conduits, in dry and wet locations,

for direct burial

♦ Bending radius 10 x cable ∅ 7.5 x cable ∅ 7.5 x cable ∅

Temperature range



- 30°C up to + 90°C

- 5°C up to + 50°C

- 30°C up to + 90°C - 5°C up to + 50°C

- 30°C up to + 90°C - 5°C up to + 50°C

Reaction to fire




IEC 60332-1

IEC 60332-3 part 24 (Cat. C), UL 1685 vertical tray test, IEEE 383 vertical tray test



application For transmission of analogue and digital signals in instrument and control systems; UL-listed tray cable in

compliance with NEC article 336, for use in hazardous classified locations class I and class II division 2 acc. to

NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources, e.g. public mains

electricity supply

E LEONI KErpEN


TC Common Types 600 V Single & Multipair and Multi-Triple, individual and/or collective shield, PVC-jacketunarmoured

Construction

Product Types Unarmoured Types

Conductor Plain annealed copper; 7 stranded acc. UL 13

♦ size

♦ conductor design mm

AWG 18/7

7 x 0.404

AWG 16/7

7 x 0.490

AWG 14/7

7 x 0.620

Insulation materials ♦ Polyvinylchloride PVC heat resistant PVCw with nylon jacket NC or

♦ Polyvinylchloride PVC heat resistant PVCw or

♦ Cross linked Polyethylene XLPE

Cabling element

♦ without ind. shield Pair, Triple

♦ with ind. shield PiMF, TiMF

Individual shield Aluminium/Plastic-tape over stranded tinned copper drain wire plastic tape under and above shield

Wrapping at least one plastic tape above cable core


Outer jacket

Colour

PVCw

black or blue for intrinsically safe systems

Marking LEONI KERPEN ICON ⋅NO. OF ELEmENTS ⋅SIzE ⋅TYPE OF SHIELd ⋅(UL) ⋅TC TYPE OF CONdUCTOR /

jACKET mATERIAL ⋅600 V ⋅TEmPERATURE RATING ⋅SUN RES ⋅dIR bUR ⋅LENGTH mARKING

E7LEONI KErpEN


TC Common Types 600 V Single & Multipair and Multi-Triple, individual and/or collective shield, PVC-jacketunarmouredElectrical Data at 20°C 600 V




Insulation resistance at 15 °C 1)

♦ PVCw -insulation min. MΩxkm 175 175 175

♦ XLPE -insulation min. MΩxkm 810 810 810

Inductance max. mH/km 1 1 1

Mutual capacitance

♦ PVCw-insulation with NC



♦ PVCw-insulation



♦ XLPE-insulation



Test voltage

♦ Core/core (Urms

) V 2000 4) 2000 4) 2000 4)


) V 2000 4) 2000 4) 2000 4)

Operating voltage (Urms) max. V 600 600 600

1) in Water

2) Values for cables with 1 element correspond to those for PimF and TimF resp.

3) Values for cables with 2 up to 4 elements + 20%

4) 3000 V for XLPE-insulated Types

E8 LEONI KErpEN

Group5: ControlCableacc.toUL1277

ControlCableTC600 V

plain stranded copper conductors,cores,

overall static screen

PVC/NC-insulation,PVC-jacket

PVC-insulation,PVC-jacket

XLPE-insulation,PVC-jacket

unarmoured unarmoured unarmoured

FLEONI KErpEN

Control Cable acc. to UL 1277

TC Common Types 600 V Multi core, collective shield, PVC-jacketarmoured

Technical Data

Type of insulation/jacket PVCwNC/PVCw PVCw/PVCw XLPE/PVCw

Type of cabling elements Cores Cores Cores

No. of cabling elements 2, 3, 4, 5, 7, 10, 12, 16, 21, 25 2, 3, 4, 5, 7, 10, 12, 16, 21, 25 2, 3, 4, 5, 7, 10, 12, 16, 21, 25

Conductor sizes AWG 18/7, AWG 16/7, AWG 14/7 AWG 18/7, AWG 16/7, AWG 14/7 AWG 18/7, AWG 16/7, AWG 14/7

Unarmoured types RE-Yw4Y(St)Yw-fl RE-Yw(St)Yw-fl RE-2X(St)Yw-fl

♦ Laying Recommended for indoor and outdoor installation, on racks,trays, in conduits, in dry and wet locations, for

direct burial

♦ Bending radius 10 x cable ∅ 7.5 x cable ∅ 7.5 x cable ∅

Temperature range



- 30°C up to + 90°C

- 5°C up to + 50°C

- 30°C up to + 90°C

- 5°C up to + 50°C

- 30°C up to + 90°C

- 5°C up to + 50°C

Reaction to fire




IEC 60332-1

IEC 60332-3 part 24 (Cat. C), UL 1685 vertical tray test, IEEE 383 vertical tray test



application For transmission of analogue and digital signals in instrument and control systems; UL-listed tray cable in

compliance with NEC article 336, for use in hazardous classified locations class I and class II division 2 acc. to

NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources, e.g. public mains

electricity supply

F LEONI KErpEN



Construction

Product Types unarmoured types

Conductor Plain annealed copper; 7 stranded acc. UL 13

♦ size

♦ conductor design (mm)

AWG 18/7

7 x 0.404

AWG 16/7

7 x 0.490

AWG 14/7

7 x 0.620

Insulation materials ♦ Polyvinylchloride PVC heat resistant PVCw with nylon jacket NC or

♦ Polyvinylchloride PVC heat resistant PVCw or

♦ Cross linked Polyethylene XLPE

Cabling element Core

Wrapping at least one plastic tape above cable core


Outer jacket

Colour

PVCw,

black or blue for intrinsically safe systems

Marking LEONI KERPEN ICON ⋅NO. OF ELEmENTS ⋅SIzE ⋅TYPE OF SHIELd ⋅(UL) ⋅TC TYPE OF CONdUCTOR/

jACKET mATERIAL ⋅600 V ⋅TEmPERATURE RATING ⋅SUN RES ⋅dIR bUR ⋅LENGTH mARKING

FLEONI KErpEN



Electrical Data at 20°C 600 V




Insulation resistance at 15 °C 1)

♦ PVCw -insulation min. MΩxkm 175 175 175

♦ XLPE -insulation min. MΩxkm 810 810 810

♦ PVCwNC -insulation min. MΩxkm 205 205 205

Inductance max mH/km 1 1 1

Test voltage

♦ Core/core (Urms

) V 2000 2) 2000 2) 2000 2)


) V 2000 2) 2000 2) 2000 2)

Operating voltage (Urms) max. V 600 600 600

1) in Water

2) 3000 V for XLPE-insulated Types

F4 LEONI KErpEN

Table 1: Conversion of General Units

Length area1 mil = 0.0254 mm 1 circ. mil (Cm) = 0.0005067 mm2

1 inch (in“) = 25.4 mm 1 MCM = 0.5067 mm2

1 foot (ft‘) = 0.305 m 1 square inch (in2) = 645.16 mm2

1 yard (yd) = 0.914 m 1 square foot (ft2) = 0.0929 m2

1 mile (mi.) = 1.61 km 1 square yard (yd2) = 0.836 m2

1 statute mile (mi.) = 1.61 km 1 square mile (sq.mi.) = 2.59 km2

1 intern naut. mile (sm) = 1.852 km

Volume1 cubic inch (m3) = 16.39 cm3

1 cubic foot (ft3) = 0.0283 m3

1 cubic yard (yd3) = 0.765 m3

1 barrel = 159 l

1 US gallon (US gal) = 3.79 l

1 UK gallon (UK gal) = 4.55 l

Force Mass1 poundal (pdl) = 0.1 38 N 1 ounce (oz) = 0.0284 kg

1 pound-force (lbf) = 4.448 N 1 pound (lb) = 0.454 kg

1 brit.ton-force = 9964 N 1 brit.ton (long ton) = 1016 kg

1 US ton (short ton) = 907 kg

Power Energy1 horsepower (H.P.) = 0.746 kW 1 brit.therm.unit (b U) = 1055 J

1 brit.therm.unit = 0.000293 kWh

Pressure1 bf/in2 (psi) = 0.06895 bar = 6.895 N/m2

1 lbf/ft2 = 0.000479 bar = 47.9 N/m2

1 lbf/yd2 = 0.0000532 bar = 5.32 N/m2

1 lbf/in2 (psi) = 0.703 kp/cm2 = 0.0703 at

Electrical Unit per Length1 µ f per mile = 0.62 µ F/km

1 MΩ per mile = 1.61 MΩ x km

1 decibel per mile = 0.62 db/km

1 pf per foot = 3.28 pF/m

1 decibel per 1000 ft = 3.28 db/km

1 Ω per 1000 ft = 3.28 Ω/km

abbreviations for Multiples and Submultiples

prefix abridged multiple prefix abridged submultiplemark power name mark power name

Tera T 1012 billion * Piko p 1012 billionth *

Giga G 109 milliard * Nano n 109 milliardth *

Mega M 106 million mikro µ 106 millionth

Kilo k 103 thousand Milli m 103 thousanth

Hekto h 102 hundred zenti c 102 hundredth

deka da 101 ten Dezi d 101 tenth

* In United States 109 means a billion and 1012 means a trillion

GLEONI KErpEN

Table 2: Conductor Comparison aWG - Metric

Solid plain annealed copper conductorsConductor Size Electrical Resistance2)

EN 50288-73) UL 134)

aWGMetric1)

(mm²)

No. of

wires

Conductor-Ø

(mm)

(Ω/km)

(Ω/1000 ft)

(Ω/km)

(Ω/1000 ft)

30 0.051 1 0.254 --- --- 361 110

28 0.081 1 0.320 --- --- 228 69.3

26 0.128 1 0.404 --- --- 154 46.9

24 0.205 1 0.511 --- --- 97.6 29.7

22 0.324 1 0.643 --- --- 56.3 17.2

--- 0.5 1 0.8 36.8 11.2 --- ---

20 0.517 1 0.813 --- --- 35.2 10.7

--- 0.75 1 1.0 25.0 7.6 --- ---

18 0.82 1 1.02 --- --- 22.3 6.8

--- 1 1 1.13 18.5 5.6 --- ---

16 1.3 1 1.29 --- --- 14.0 4.3

--- 1.5 1 1.37 12.3 3.76 --- ---

14 2.1 1 1.63 --- --- 8.79 2.67

--- 2.5 1 1.76 7.56 2.31 --- ---

12 3.3 1 2.05 --- --- 5.52 1.68

--- 4 1 2.26 4.70 1.43 --- ---

Stranded plain annealed copper conductorsConductor Size Electrical Resistance2)

EN 50288-73) UL 134)

aWGMetric1)

(mm²)

No. of

wires

Conductor-Ø

(mm)

(Ω/km)

(Ω/1000 ft)

(Ω/km)

(Ω/1000 ft)

24 0.205 7 0.579 --- --- 91.1 27.8

22 0.327 7 0.729 --- --- 57.6 17.6

--- 0.5 7 0.9 36.8 11.2 --- ---

20 0.517 7 0.919 --- --- 35.8 11.0

--- 0.75 7 1.11 25.0 7.6 --- ---

18 0.82 7 1.16 --- --- 22.8 6.9

--- 1 7 1.29 18.5 5.6 --- ---

16 1.3 7 1.46 --- --- 14.2 4.36

--- 1.5 7 1.59 12.3 3.76 --- ---

14 2.1 7 1.85 --- --- 8.94 2.72

--- 2.5 7 2.01 7.56 2.31 --- ---

12 3.3 7 2.32 --- --- 5.63 1.72

--- 4 7 2.58 4.70 1.43 --- ---

1) Sizes acc. to EN 50288-7 printed in blue

2) The value for the electrical resistance is given for 20°C (68.0 °F)

3) The value for the electrical resistance acc. to EN 50288-7 is for the finished cables with multipairs/triples

4) The value for the electrical resistance acc. to UL 13 is calculated for “one pair/triple and an assembly of pairs/triples”

G LEONI KErpEN

Color Code of Instrumentation and Control Cables acc. to UL

Color code of standardized Product Programme

Cabling element

Rated voltageCore 1) Pair 2) Triple 2)

300 V -- black/white black/white/red

continuously numbered on white

core 1, 2, 3..

for multi-element cables,

starting with 1 in the centre


core 1, 2, 3..



600 V black black/white black/white/red

continuously numbered

1, 2, 3 ..

for multi-core cables,


continuously numbered on blue core

1, 2, 3..




core 1, 2, 3..



1) Communication wire principially applied as last element in the outer layer

2) Identification scheme for elements with and without individual shield

Other color codes on request

GLEONI KErpEN

Identification of Instrumentation and Thermocouple Cables

Type Designations of KERPEN’s Instrumentation- and Thermocouple Cable read as follows:

Type abbreviation code

No. of cabling elements

Type of cabling element

Conductor size in mm² (stranded conductors) or conductor diameter in mm (solid conductors)

followed by (where and when applicable):

Type of conductor material (for Thermocouple cable only, see Table 1)

Abbreviation sign for cables with Circuit Integrity Properties

Individual shielding of pairs and triples resp.

Rated Voltage

Standard

abbreviation Code

Cable Type Metal jacket

RE- Instrumentation and Instrumentation Control Cable resp. M jacket of lead

RT- Thermocouple Extension or Compensating Cable Mz jacket of lead alloy

Metal cladding of conductor

-v Copper conductor, tinned

Insulation and/or jacket materials armour

Y Insulation, inner or outer jacket of Polyvinylchloride (PVC) SWA Galvanized round steel wires

Yw Insulation, inner or outer jacket of heat resistant

Polyvinylchloride (PVCw)

RG Galvanized round steel wires with counter helix of

galvanized steel tape

Yv Outer jacket of Polyvinylchloride of increased thickness FG Galvanized flat steel wires with counter helix of

galvanized steel tape

2Y Insulation, inner or outer jacket of Polyethylene (PE) B double layer of galvanized steel tapes

2X Insulation of crosslinked Polyethylene (XLPE) Q braid of galvanized round steel wires

H Inner or outer jacket of halogen-free, flame retardant

compound (LSZH)

2G Insulation of silicone (Sil)

4Y Covering of Polyamide (Nylon)

Shielding Other properties

(ST) Static shield of Aluminium laminated plastic tape CI Circuit Integrity (Fire resistant)

(L) Longitudinally applied Aluminium foil, one or both sides

plastic coated

-fl Increased flame retardancy;

requirements for IEC 60332-3-24 (cat.C) fulfilled 1)

C braid of tinned or untinned copper wires over cable core F Cable core petrojelly filled

K Wrapping of copper foils

PiMF Pair in Metal Foil

TiMF Triple in Metal Foil

(C) braid of tinned or untinned copper wires over single cabling

element

1) This property will be indicated on the outer jacket of PVC-jacketed cables with the marking RP

G4 LEONI KErpEN

Type of Cabling Elements

The type of cabling elements are indicated by figures resp. by figures with an additional information for individual shielded cabling elements

Core no figure

Pair 2

Triple 3

Individual shielded pair 2 PiMF

Individual shielded triple 3 TiMF

Indication Examples:

Instrumentation cable RE, 24 triples 3, conductor size 1.3 mm², insulation of PE 2Y, individual TiMF and overall shield (St), inner jacket of

PVC Y, lead jacket M, inner jacket of PVC Y, steel wire armour SWA, outer jacket of PVC Y-fl, rated voltage 300 V, standard EN 50288-7

RE-2Y(St)YmYSWAY-fl 24 x 3 x 1.3 mm² TimF 300 V EN 50288-7

Thermocouple extension RT-, 8 pairs 2, conductor diameter 0,8 mm, conductor material KX, insulation of heat resistant PVC Yw, overall

shield (St), inner jacket of heat resistant PVC Yw, steel wire armour SWA, outer jacket of heat resistant PVC Yw, rated voltage 300 V,

standard EN 50288-7

RT-Yw(St)YwSWAYw-fl 8 x 2 x 0.8 mm KX 300 V EN 50288-7

Instrumentation control cable RE-, halogen-free with Circuit Integrity CI, 8 cores, conductor size 2.5 mm², insulation of XLPE 2X, overall

shield (St), outer jacket of halogen-free, flame retardant compound H, rated voltage 500 V, standard EN 50288-7

RE-2X(St)H 8 x 2.5 mm² CI 500 V EN 50288-7

Instrumentation cable RE, 12 pairs 2, conductor size 1.5 mm², insulation of XLPE 2X, individual shield PiMF, multi layer jacket (L)2Y, steel

wire armour SWA, outer jacket of PE 2Y, rated voltage 300 V, standard EN 50288-7

RE-2X(L)2Y4YSWA2Y 12 x 2 x 1.5 mm² PimF 300 V EN 50288-7

Instrumentation cable RE, 24 triples 3, conductor size AWG 20/7, insulation of heat resistant PVC Yw, individual shield TiMF and overall

shield (ST), outer jacket of heat resistant PVCw Yw, rated voltage 300 V standard UL 13

RE-Yw(ST)Yw-fl 24 x 3 x AWG 20/7 TimF 300 V UL 13

GLEONI KErpEN

Zweifaller Strasse 275-287

52224 Stolberg

Germany

Phone +49 (0)2402-17-307

Fax +49 (0)2402-75590

E-mail [email protected]

www.leoni-kerpen.com

LEONI Kerpen GmbH

business Unit Industrial Projects

icon product guide ul web 01

Documents

icon instrumentation

icon control cables

thermocouple extension

ulcommon types ul

usamerican standards

bus cables copper

national standards

instrumentation tray