icheme education subject group design project book list
TRANSCRIPT
1
Aşağıdaki bilgiler http://ed.icheme.org/booklist.html adresinden alınmıştır (erişim tarihi
Eylül 2009)
IChemE Education Subject Group
Design Project Book List
Contributed by Dr John F Porter, Hong Kong University of Science & Technology, August-
2000
( I have udated these for new editions where known. Some of these books are no longer in
print, but may be in the library. Earlier editions are usually acceptable. If you use any in your
Design Project, remember to give the year, edition and chapter or pages referred to. Martin
Pitt, January 2003.)
General Process Information - PFDs etc.
• (2002) Ullman’s Encyclopaedia of Chemical Technology, 6th Edition, Wiley-VCH.
• (2001) Kirk-Othmer Encyclopaedia of Chemical Technology, 4th Edition, Wiley.
• (2001) Kirk-Othmer Concise Encyclopaedia of Chemical Technology, 4th Edition,
Wiley.
• (1992) Riegel’s Handbook of Industrial Chemistry, Ed. J.A. Kent, 9th Edition, Van
Nostrand Reinhold.
• (1976-2001) Encyclopaedia of Chemical Processing and Design, Ed. J.J. McKetta &
W.A. Cunningham, Marcel Dekker.
• (1984) Shreeve’s Chemical Process Industries, Ed. G.T. Austin, 5th Edition, McGraw-
Hill.
• Ray, M.S. (1991) Chemical Process and Plant Design Bibliography, Noyes.
• (1994) ASPEN Plus Reference Manuals, Aspen Technology, Cambridge, Ma.
• British Standard, BS1553 Part 1: (1976) Graphical Symbols for Piping Systems and
Plant
General Design References
• Perry, R.H. & Green, D. (1998) Perry’s Chemical Engineer’s Handbook, 7th Edition,
McGraw-Hill.
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann .
• Peters, M.S. & Timmerhaus, K.D. (1991) Plant Design and Economics for Chemical
Engineers, 4th Edition, McGraw-Hill.
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley.
2
• Biegler, L.T., Grossmann, I.E. & Westerberg, A.W. (1997) Systematic Methods of
Chemical Process Design, Prentice-Hall.
• Walas, S.M. (1988) Chemical Process Equipment Selection and Design, Butterworths.
Rules of Thumb
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill, New
York, pp. 507-515.
• Walas, S.M. (1987) Rules of Thumb, Chemical Engineering, March 16, pp. 75-81
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley, Appendix B.
• Branan, C.R. (2002) Rules of Thumb for Chemical Engineers, 3rd ed, Gulf.
Flowsheet Development
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill.
• Biegler, L.T., Grossmann, I.E. & Westerberg, A.W. (1997) Systematic Methods of
Chemical Process Design, Prentice-Hall.
• Seider, W.D., Seader, J.D. & Lewin, D.R. (1999) Process Design Principles:
Synthesis, Analysis and Evaluation, Wiley.
Material & Energy Balances
• Himmelblau, D.H. (1996) Basic Principles and Calculations in Chemical
Engineering, 6th Edition, Prentice-Hall International.
• Reklaitis, G.V. (1983) Introduction to Material and Energy Balances, Wiley.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann .
• Luyben, W.L. & Wenzel, L.A. (1988) Chemical Process Analysis: Mass and Energy
Balances, Prentice-Hall.
Process Economics and Project Evaluation
• Allen, D. (1991) Economic Evaluation of Projects, 3rd Edition, IChemE.
• IChemE (2000) A Guide to Capital Cost Estimating, 4th Edition, IChemE.
• Perry, R.H. & Green, D. (1998) Perry’s Chemical Engineer’s Handbook, 7th Edition,
McGraw-Hill., section 9.
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley, chapters 5-8.
• Peters, M.S. & Timmerhaus, K.D. (1991) Plant Design and Economics for Chemical
Engineers, 4th Edition, McGraw-Hill, chapters 6-9.
• Garrett, D.E. (1989) Chemical Engineering Economics, Van Nostrand Reinhold.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann .
3
Health and Environmental Implications of Processes
• Lewis, R.J. (1997) Sax’s Dangerous Properties of Industrial Materials, 6th ed, Van
Nostrand Reinhold.
• CCPS (1989) Guidelines for Chemical Process Quantitative Risk Analysis, Center for
Chemical Process Safety (CCPS) of the AIChE.
• LeVine, R. (1988) Guidelines for Safe Storage and Handling of High Toxic Hazard
Materials, Center for Process Safety of the AIChE.
• OSHA (1990) OSHA Regulated Hazardous Substances: Health, Toxicity, Economic
and Technological Data, U.S. Dept. of Labor.
• Roach, S.A. (1992) Health Risks from Hazardous Substances at Work: Assessment,
Evaluation and Control, Pergamon.
Process Safety and Hazard & Operability Analyses
• CCPS (1985) Guidelines for Hazard Evaluation Procedures, Batelle-Columbus
Division, Center for Chemical Process Safety (CCPS) of the AIChE, pp. 4-33 to 4-52.
• Crowl, D.A. & Louvar, J.F. (1990) Chemical Process Safety - Fundamentals with
Applications, Prentice-Hall International, pp. 323-327.
• Kletz, T.A. (1999) HAZOP and HAZAN: Identifying and Assessing Process Industry
Hazards, 4th Edition, IChemE, chapter 2.
• King, R.W. (1990) Safety in the Process Industries, Butterworths.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann .
• Peters, M.S. & Timmerhaus, K.D. (1991) Plant Design and Economics for Chemical
Engineers, 4th Edition, McGraw-Hill, pp. 62-69.
P & I Diagrams and Control
• British Standard BS1646: (1979) Graphical Symbols for Process Measurement and
Control Functions"
• Shinskey, F.G. (1988) Process Control Systems - Application, Design and Tuning, 3rd
Edition, McGraw-Hill.
• Stephanopoulos, G. (1984) Chemical Process Control: An Introduction to Theory and
Practice, Prentice-Hall International.
• Marlin, T.E. (1995) Process Control - Designing Processes and Control Systems for
Dynamic Performance, McGraw-Hill.
• Luyben, W.L. (1990) Process Modelling and Simulation for Chemical Engineers, 2nd
Edition, McGraw-Hill.
Environmental Law
• McEldowney, J.F. & McEldowney, S. (1996) Environment and the Law: An
Introduction for Environmental Scientists and Lawyers, Longman, UK.
Pollution Prevention and Waste Minimisation
4
• IChemE (1993) Effluent Treatment and Waste Minimisation, IChemE, Rugby, UK.
• Rossiter, A.P. (1995) Waste Minimisation through Process Design, McGraw-Hill.
• Patterson, J.W. (1985) Industrial Waste Management - Process Modifications for
Industrial Pollution Source Reduction, Lewis.
• Nemerow, N.L. (1995) Zero Pollution for Industry - Waste Minimisation through
Industrial Complexes, Wiley Interscience.
• Theodore, L. & McGuinn, Y.C. (1992) Pollution Prevention, Van Nostrand Reinhold.
• Overcash, M.R. (1986) Techniques for Industrial Pollution Prevention, Lewis.
• Noyes, R. (ed.) (1993) Pollution Prevention Technology Handbook, Noyes.
• Higgins, T.E. (ed.) (1995) Pollution Prevention Handbook, Lewis.
• Sell, N.J. (1992) Industrial Pollution Control - Issues and Techniques, 2nd Edition,
Van Nostrand Reinhold.
• Crittenden, B.D. & Kolaczkowski, S.T. (1995) Waste Minimisation: A Practical
Guide, IChemE, Rugby, UK.
• Allen, D.T. & Rosselot, K.S. (1997) Pollution Prevention for Chemical Processes,
Wiley-Interscience.
Pollution Control Systems
• Buonicore, T.A. (1994) Air Pollution Control Equipment: Selection, Design,
Operation and Maintenance, Springer-Verlag.
• Benitez, J. (1993) Process Engineering and Design for Air Pollution Control, Prentice
Hall.
• De Nevers, N. (1995) Air Pollution Control Engineering, McGraw-Hill.
• Wise, D.L. & Trantolo, D.J. (1994) Process Engineering for Pollution Control and
Waste Minimisation, Marcel Dekker.
• Grady, C.P.L. & Lim, H.C. (1980) Biological Wastewater Treatment: Theory and
Applications, Marcel Dekker.
• Reynolds, T.D. (1982) Unit Operations and Processes in Environmental Engineering,
PWS-KENT.
• Mycock, J.C. (1995) Handbook of Air Pollution Control Engineering and Technology,
CRC.
• Bahu, R., Crittenden, B.D. & OHara, J. (1997) Management of Process Industry
Waste: An Introduction, IChemE, Rugby, UK.
• Tchobanoglous, G. (1990) Wastewater Engineering: Treatment, Disposal and Reuse,
2nd edition, McGraw-Hill.
• Kiely, G. (1998) Environmental Engineering, McGraw-Hill.
• Feates, F. & Barratt, R. (1995) Integrated Pollution Management: Improving
Environmental Performance, McGraw-Hill.
• Brunner, C.R. (1994) Hazardous Waste Incineration, 2nd edition, McGraw-Hill
International.
Detailed Design of Heat Exchangers
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill, pp.
234, 486-489, 507-515.
• Geankoplis, C.J. (1993) Transport Processes and Unit Operations, 3rd Edition,
Prentice-Hall International, pp. 247-252, 342.
5
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley, pp. 145-166.
• Perry, R.H. & Green, D. (1998) Perry’s Chemical Engineer’s Handbook, 7th Edition,
McGraw-Hill.
• Kern, D.Q. (1990) Process Heat Transfer, McGraw-Hill.
• Peters, M.S. & Timmerhaus, K.D. (1991) Plant Design and Economics for Chemical
Engineers, 4th Edition, McGraw-Hill, chapter 15.
• Coulson, J.M. & Richardson, J.F. (1990) Chemical Engineering - Volume 1: Fluid
Flow, Heat Transfer and Mass Transfer, Butterworth-Heinemann, chapter 9.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann .
• Linhoff, B. et al (1994) A User Guide on Process Integration for the Efficient Use of
Energy, IChemE, chapter 3.
Detailed Design of Gas Phase Heterogeneous Catalytic
Reactors
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill, pp.
138-153, 157, 486-489, 524, 526.
• Geankoplis, C.J. (1993) Transport Processes and Unit Operations, 3rd Edition,
Prentice-Hall International, pp. 247-253.
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley, pp. 145-166, 211-218.
• Perry, R.H. & Green, D. (1984) Perry’s Chemical Engineer’s Handbook, 6th Edition,
McGraw-Hill, pp. 4-21 to 4-52, 5-54, see also chapters 11, 16, 18 & 20.
• Smith, J.M. (1981) Chemical Engineering Kinetics, 3rd Edition, McGraw-Hill, pp.
541-599.
• Levenspiel, O. (1999) Chemical Reaction Engineering, 3rd Edition, Wiley, chap 18 &
19
• Fogler, H.S. (1992) Elements of Chemical Reaction Engineering, Prentice-Hall
International, pp. 406-447.
• Carberry, J. & Varma, A. (1987) Chemical Reaction and Reactor Engineering, Marcel
Dekker.
• Whitaker, S. & Cassano, A.E. (1986) Concepts and Design of Chemical Reactors,
Gordon and Breach Science, pp. 179-212
• Rase, H.F. (1977) Chemical Reactor Design for Process Plants, Wiley Interscience.
• Rase, H.F. (1990) Fixed-Bed Reactor Design and Diagnostics: Gas-Phase Reactions,
Butterworths.
• Rose, L.M. (1981) Chemical Reactor Design in Practice, Elsevier Scientific.
• Satterfield, C.N. (1991) Heterogeneous Catalysis in Industrial Practice, 2nd Edition,
McGraw-Hill.
• Twigg, M.V. (1996) Catalyst Handbook, Manson Pub., London.
• Walas, S.M. (1989) Reaction Kinetics for Chemical Engineers, Butterworths.
• Mezaki, R. & Inoue, H. (ed.) (1991) Rate Equations of Solid-Catalysed Reactions,
University of Tokyo.
Detailed Design of Distillation Columns
6
• Van Winkle, M. (1967) Distillation, McGraw-Hill.
• Kister, H.Z. (1990) Distillation Operations, McGraw-Hill.
• Kister, H.Z. (1992) Distillation Design, McGraw-Hill.
• King, C.J. (1980) Separation Processes, McGraw-Hill.
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill, pp.
172-204, 426-478, 530-541.
• Geankoplis, C.J. (1993) Transport Processes and Unit Operations, 3rd Edition,
Prentice-Hall International, pp. 640-696.
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley, pp. 182-202.
• Perry, R.H. & Green, D. (1998) Perry’s Chemical Engineer’s Handbook, 7th Edition,
McGraw-Hill, chapter 13
• Treybal, R.E. (1980) Mass Transfer Operations, 3rd Edition, McGraw-Hill, chapter 9.
• McCabe, W.L., Smith , J.C. & Harriott, P. (1993) Unit Operations of Chemical
Engineering, 5th Edition, McGraw-Hill, chapters 17, 18 and 19.
• Coulson, J.M. & Richardson, J.F. (1990) Chemical Engineering - Volume 2: Particle
Technology and Separation Processes 4th ed, Butterworth Heinemann, chapters 4 and
12.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann
• Peters, M.S. & Timmerhaus, K.D. (1991) Plant Design and Economics for Chemical
Engineers, 4th Edition, McGraw-Hill, chapter 16.
• Strigle, R.F. (1994) Packed Tower Design and Applications, 2nd Edition, Gulf.
• Billet, R. (1995) Packed Towers in Processing and Environmental Technology, VCH.
• Schweitzer, P.A. (1988) Handbook of Separation Techniques for Chemical Engineers,
2nd Edition, McGraw-Hill.
• Rousseau, R.W. (1987) Handbook of Separation Process Technology, Wiley
Interscience, chapter 5.
• Wankat, P.C. (1988) Equilibrium Staged Separations: Separations in Chemical
Engineering, Elsevier.
• Walas, S.M. (1985) Phase Equilibria in Chemical Engineering, Butterworths.
Detailed Design of Absorbers
• Douglas, J.M. (1988) Conceptual Design of Chemical Processes, McGraw-Hill, pp.
73-90, 426-436, 453-458.
• Treybal, R.E. (1980) Mass Transfer Operations, 3rd Edition, McGraw-Hill, chapters 6
& 8.
• Perry, R.H. & Green, D. (1998) Perry’s Chemical Engineer’s Handbook, 7th Edition,
McGraw-Hill, chapters 14 and 18.
• McCabe, W.L., Smith , J.C. & Harriott, P. (1993) Unit Operations of Chemical
Engineering, 5th Edition, McGraw-Hill, pp. 686-737.
• Geankoplis, C.J. (1993) Transport Processes and Unit Operations, 3rd Edition,
Prentice-Hall International, pp. 118-127, 610-639.
• Ulrich, G.D. (1984) A Guide to Chemical Engineering Process Design and
Economics, Wiley, pp. 182-199.
• Billet, R. (1995) Packed Towers in Processing and Environmental Technology, VCH,
pp. 355-361.
• Kohl, A. & Riesenfeld, F. (1985) Gas Purification, 4th Edition, Gulf, pp. 182-236.
7
• Strigle, R.F. (1994) Packed Tower Design and Applications, 2nd Edition, Gulf, pp.
49-91.
• Newman, S.A. (1985) Acid and Sour Gas Treating Processes, Gulf, pp. 42-51, 319-
• Coulson, J.M. & Richardson, J.F. (1990) Chemical Engineering - Volume 2: Particle
Technology and Separation Processes 4th ed, Butterworth Heinemann, chapters 4 and
12.
• Coulson, J.M., Richardson, J.F. & Sinnott, R.K. (1999) Chemical Engineering -
Volume 6: An Introduction to Chemical Engineering Design 3rd ed, Butterworth
Heinemann.
• Schweitzer, P.A. (1988) Handbook of Separation Techniques for Chemical Engineers,
2nd Edition, McGraw-Hill.
• Rousseau, R.W. (1987) Handbook of Separation Process Technology, Wiley
Interscience, chapter 6.
• Walas, S.M. (1985) Phase Equilibria in Chemical Engineering, Butterworths.
This page is maintained by Martin Pitt
Last updated 8 January 2003