i sl 1. speed dowel - canzac ltd · using the speed dowel system (for round or square speed dowel...
TRANSCRIPT
0800 422 692 canzac.com
IN SLAB
1. PRODUCT NAME
2. SUPPLIER
3. PRODUCT DESCRIPTION
4. QUALITY ASSURANCE FOR FUNCTIONING CONCRETE
5. INSTALLATION
6. PRODUCT SIZE INFORMATION
1. SPEED DOWEL
0800 422 692 canzac.com
IN SLAB
2. SUPPLIER Canzac Ltd 3 Parkhouse Road Wigram Christchurch New Zealand 8042 Ph (03) 343 4254 Fx (03) 343 4237 www.canzac.com
3. PRODUCT DESCRIPTION SPEED DOWELTM is the superior choice for slab on garde and vertical wall construction joints.
Applications for SPEED DOWELTM are limitless; typical projects include:• Distribution Centres• Manufacturing Facilities• Warehouse• Commercial/Industrial Developments• Parking Facilities• Entertainment Centres• Airports
SPEED DOWELTM is the slip dowel installation system preferred by engineers and contractors alike. SPEED DOWELTM provides a higly effective method for constructing superior quality construction joints in concrete flatwork. Additionally, SPEED DOWELTM cuts the time and labour of conventional slip dowel installation in half.
0800 422 692 canzac.com
IN SLAB
4. QUALITY ASSURANCE FOR FUNCTIONING CONCRETE“ Load transfer is accomplished through aggregate interlock, through a preformed key, or by the use of a doweled joint” ACI 224.3R-21 5.24
“For dowels to be effective, they should be smooth, aligned, and supported so they will remain parallel in both the horizontal and vertical planes during the placing and finishing operation. All dowels should be sawn and not sheared. Properley alligned, smooth dowels allow the joint to open as concrete shrinks” ACI 302.1R-12 3.2.7
“The dowels should be centered on the joint, to permit horizontal movemwnt, the dowels must not bond to the concrete on at least one side of the joint” ACI 224.3R-21 5.2.4
“Dedicated designers realize the proper implementation of their design is crucial for successful con-struction. Design criteria for concrete construction includes the use of dowels in expansion and con-struction joints to accomodate movement and load transfer. Improper alignment of these dowels will cause increased tensile stress, which results in spalling and cracking of the concrete. These failures will ultimately increase repair and maintenance costs and diminish the appearance of the concrete.”
5. INSTALLATION• Attach bases to the face of the concrete forms using a double-headed nail or self-tapping screw.• Center of base shall be centred on form (or positioned as directed by engineer)• Prior to pouring concrete, SPEED DOWELTM sleeve shall be slipped over base• Pour concrete minimum 18” from SPEED DOWELTM system and work concrete around the SPEED
DOWELTM system• Concrete forms shall be removed with bases still attached. Bases may be reused• Install slip dowels to the full depth of the embedded SPEED DOWELTM sleeve and proceed with
next concrete pour
0800 422 692 canzac.com
IN SLAB
For optimum reuse of your formwork when using the SPEED DOWEL system(For round or square speed dowel base plates)
For square base plates, use three screws as pictured.
Remove all slurry from the back of the formwork that the base is attached to for easy form removal.
IMPORTANT INFORMATIONInside the speed dowel sleeve is a nipple 20mm long. When inserting dowel into sleeve do not force any further than the nipple.
When dowel bars have been cropped and not cut, only one end of the dowel will slide into the sleeve. Try the other end or grind one end of the dowel.
DO NOT HAMMER THE DOWEL INTO THE SLEEVE!
FOR ONSITE ASSISTANCE CALL US ON 0800 422 692
0800 422 692 canzac.com
IN SLAB
SQUARE SPEED DOWEL SLEEVES AND BASE PLATESCODE SIZE UNIT
10 605 16 X 200mm Sleeve Each
10 610 16 x 230mm Sleeve Each
10 615 16 x 300mm Sleeve Each
10 705 19 x 230mm Sleeve Each
10 710 19 x 300mm Sleeve Each
10 720 20 x 230mm Sleeve Each
10 725 20 x 300mm Sleeve Each
12605 16 x 200mm Sleeve & 16 x 400mm Steel Bar Set
12 615 16 x 300mm Sleeve & 16 x 600mm Steel Bar Set
12 710 19 x 230mm Sleeve & 19 X 460MM Steel Bar Set
12 805 20 x 230mm Sleeve & 20 x 460mm Steel Bar Set
10 620 16mm Reusable Base Plate Each
10 715 19mm Reusable Base Plate Each
10 730 20mm Reusable Base Plate Each
0800 422 692 canzac.com
IN SLAB
ROUND SPEED DOWEL SLEEVES AND BASE PLATES
CODE SIZE UNIT10 100 16 X 230mm Sleeve Each
10 105 16 x 300mm Sleeve Each
10 205 19 x 230mm Sleeve Each
10 210 19 x 300mm Sleeve Each
10 220 20 x 230mm Sleeve Each
10 225 20 x 300mm Sleeve Each
10 305 24 x 230mm Sleeve Each
10 310 24 x 300mm Sleeve Each
10 405 32 x 230mm Sleeve Each
10 505 38 x 230mm Sleeve Each
10 510 38 x 300mm Sleeve Each
12 105 16 x 200mm Sleeve & 16 x 400mm Steel Bar
Set
12 110 16 x 230mm Sleeve & 16 x 460mm Steel Bar
Set
12 115 16 x 300mm Sleeve & 16 x 600mm Steel Bar
Set
12 205 20 x 230mm Sleeve & 20 x 460mm Steel Bar
Set
12 210 20 x 300mm Sleeve & 20 x 600mm Steel Bar
Set
12 305 24 x 230mm Sleeve & 24 x 460mm Steel Bar
Set
12 310 24 x 300mm Sleeve & 24 x 600mm Steel Bar
Set
12 405 32 x 230mm Sleeve & 32 x 460mm Steel Bar
Set
12 410 32 x 300mm Sleeve & 32 x 600mm Steel Bar
Set
12 505 38 x 230mm Sleeve & 38 x 460mm Steel Bar
Set
12 510 38 x 300mm Sleeve & 38 x 600mm Steel Bar
Set
10 110 16mm Reusable Base Plate Each
10 230 20mm Reusable Base Plate Each
10 315 24mm Reusable Base Plate Each
10 415 32mm Reusable Base Plate Each
10 515 38mm Reusable Base Plate Each