W a l l - h u n g g a s c o n d e n s i n g b o i l e r s

*****

PROJECT

<< dedietrich-heating.com >>

>> Compact, light and powerful>> Optimised for the environment>> Cascade systems

Condensing boilers working for everyone

S u s t a i n a b l e C o n f o r t ®

Innovens

For 300 years, De Dietrich’s success was based on some key fundamental values: quality, reliability, durability.Through its concern for the environment and for your comfort, De Dietrich has now a comprehensive understanding of the various renewable energies through multi-energy systems that protect the planet. Therefore, heating appliances which bear the De Dietrich name are at the cutting-edge of innovation and have the advantage as they benefi ts from the commitment and the on-going expertise of their 2400 employees.

De Dietrich: choosing Sustainable Comfort®

A MARK OF EXCELLENCE

InnovensPROJECT

Innovens MC boilers

Model MC 35E MC 45 MC 65 MC 90 MC 115

Max. nominal output at 40/30°C kW 35 43 65 90 114Efficiency in % LCV 100% Ave. Temp 70°C % 97,5 97,5 98,3 97,9 96,4loading on …%

30% Return Temp 30°C % 107,7 107,7 108,9 108,1 107,1a water temp. …°CPressure at boiler outlet Pa 150 150 100 160 250Water content L 5,5 5,5 6,5 7,5 7,5Weight empty kg 58 49 64 72 74

GAS CONDENSINGBOILER

LOW TEMPERATUREGAS BOILER

ENERGY PERFORMANCE

pp

p

11% of heat from condensation not used

6% losses through the fl ue gases

1% losses through radiation

93% operating effi ciency

111%

par

rap

po

rt a

u P

CI

0,5% of heat from condensation not used

1% losses through the fl ue gases

0,5% losses through radiation

109% operating effi ciency

CONDENSING BOILERS FOR A BETTER USE OF ENERGY

HEATING BODY IN CAST ALUMINIUM-SILICIUM• The heating bodies in cast aluminium-

silicium are perfectly suited to condensing technology. Aluminium-silicium is resistant to the acid condensates which are a product of fl ue gases. And the silicium improves resistance to corrosion by the water used in heating.

• Aluminium is a very good heat conductor (7 times greater than steel, for example) and the exchange of heat is therefore optimised. Its low weight (3 times lighter than steel) also makes it possible to design boilers which are very easy to handle.

PROJECT : CUSTOMISED SOLUTIONS FOR THE WHOLE BUILDING

I HAVE TO OPTIMISE THE AVAILABLE PLACE

Minimum space requirement for maximum output

• 74 kg for an output of 114 kW

• Dimensions : L 500x H 940x D 450

I HAVE TO COMPLY WITHSPECIFICATIONS

Answers for the future

• NOx emissions less than 20 mg/kWh(MC 35E, 45 and 65)

• Improvement in operating effi ciency + 15% annual on LCV of up to110%

• Modulation from 18 to 100%

Réf.

3000

13 7

61 -

01/2

009.

Pho

tos

not c

ontra

ctua

lly b

indi

ng.

De Dietrich ThermiquePLC with corporate capital of m 21,686,37057, rue de la Gare - F-67580 MertzwillerTel: 03 88 80 27 00 - Fax: 03 88 80 27 99www.dedietrich-heating.com

S u s t a i n a b l e C o n f o r t ®

111%

bas

ed o

n LC

V11

1% b

ased

on

LCV

ddtmer9010286_inov_ang_ok.indd 1ddtmer9010286_inov_ang_ok.indd 1 9/04/09 11:53:589/04/09 11:53:58

THE SPACE-SAVING SOLUTION

Energy-saving, environmental friendly, offering excellent performances, the new generation of De Dietrich condensing boilers satisfi es the problematics of current projects:specifi cally, they offer an annual operating effi ciency of up to 110%,a low noise level, and very low NOx and CO emissions.

Today, De Dietrich is expanding its condensing range with wall-hung boilers from 8 to 114 kW to provide an appropriate response, whatever the confi guration.

OPERATING PRINCIPLE

The Diematic 3 control system enables the connection of up to 10 boilers in cascade. Various confi gurations are possible for the evacuation of fl ue gases (C13, C33, C53, B23P). Current local regulations must be respected.

EXAMPLE OF CASCADE INSTALLATION

• They take up very little space.

• They can be fi tted alone or in cascade : - attached to a wall (7 max) - in line on the fl oor (7 max) - back to back on the fl oor (10 max ; 5+5).

• A very low noise level, thanks to a silencer fi tted to the air inlet.

• They make it possible to size the installation very precisely, practically made to measure, with an installed output of up to 1140 kW (corresponding to 10 MC 115 boilers in cascade).

• They do not impose any constraints on return temperature or minimum fl ow.

• With modulation from 18 to 100 %, heat production is adjusted as accurately as possible to the needs of the installation.

• Various fl ue systems are possible, with either forced fl ue or chimney connection, in compliance with local specifi c regulations.

A SOLUTION FOR EVERY SITUATION

As they take up less space and are low in weight, these boilers are easy to install. They are also fi tted with devices that make easier handling during maintenance and reduce this expense in the annual budget!

• The boilers in this range are low in weight : less than 1 kg per kW of output (MC 65, MC 90 and MC 115).

• The heating pump is integrated into the MC 35E, saving space on installation.

• Access to internal components, particularly the heating body, is easy by simply removing the front panel.

• Access to the siphon and the air vent from the outside, offering appreciable time savings.

• These boilers operate on natural gas and propane (except MC 115).

• A hydraulic connection kit is available as optional equipment ; this includes sectional valves (fl ow, heating return and gas), a safety valve, a fi lling valve and an outlet for connection to an expansion tank.

EASIER ASSEMBLY AND MAINTENANCE

Innovens MC 35 to 115 boilers are wall-hung gas condensing boilers with the option of a forced fl ue or chimney outlet fi tted with a diematic 3 control panel.

Innovens - from 8 to 114 kW

A single block heating body in cast aluminium-silicium which is highly resistant to corrosion.

• Condensing: classifi cation**** EC in accordance with European Directive

94/42 EEC

• High operating effi ciency of up to 110%

• Practical access for easy maintenance

A surface total premix burner with stainless steel braid, modulating from 18 to 100% in output, with compact gas valve and extraction fan.• Optimal combustion hygiene and minimal pollutant emissions

(NOx < 45 mg/kWh and CO < 21 .5 mg/kWh)• A low noise level

A fully fi tted boiler: heating pump (MC 35 E), automatic air vent, pressure gauges, painted white cladding with phonic insulation and wall-mounted console.• So easy to install

� Heating fl ow R1 ¼ at Rp1� Heating return R1 ¼ at Rp1� Gas inlet R ¾� Condensates evacuation ext. Ø 25mm� Forced fl ue connectionØ 80/125 for MC 35E and MC 45Ø 100/150 for MC 65, MC 90 and MC 115� Automatic air vent

EXAMPLES OF CASCADE SYSTEMS

In fl oor-standing alignment : LVExample with 4 boilers

In wall-hung alignment : LWExample with 3 boilers

Back to back alignment : RGExample with 4 boilers

The INNOVENS range is fi tted with a Diematic 3 control system and a control panel.

• Access door with a reversible opening system that can be opened to the right or left.

• Option of incorporating up to two valve option boards.

• Diematic 3 control system offering the most accurate adjustment according to your thermal needs.

The control panel, pre-programmed in the factory, is easy to use and does not require any adjustment prior to start-up.

ACCURATE AND EFFICIENT BOILER CONTROL

Example of air/fl ue gas connection

ddtmer9010286_inov_ang_ok.indd 2ddtmer9010286_inov_ang_ok.indd 2 9/04/09 11:54:109/04/09 11:54:10

THE SPACE-SAVING SOLUTION

Energy-saving, environmental friendly, offering excellent performances, the new generation of De Dietrich condensing boilers satisfi es the problematics of current projects:specifi cally, they offer an annual operating effi ciency of up to 110%,a low noise level, and very low NOx and CO emissions.

Today, De Dietrich is expanding its condensing range with wall-hung boilers from 8 to 114 kW to provide an appropriate response, whatever the confi guration.

OPERATING PRINCIPLE

The Diematic 3 control system enables the connection of up to 10 boilers in cascade. Various confi gurations are possible for the evacuation of fl ue gases (C13, C33, C53, B23P). Current local regulations must be respected.

EXAMPLE OF CASCADE INSTALLATION

• They take up very little space.

• They can be fi tted alone or in cascade : - attached to a wall (7 max) - in line on the fl oor (7 max) - back to back on the fl oor (10 max ; 5+5).

• A very low noise level, thanks to a silencer fi tted to the air inlet.

• They make it possible to size the installation very precisely, practically made to measure, with an installed output of up to 1140 kW (corresponding to 10 MC 115 boilers in cascade).

• They do not impose any constraints on return temperature or minimum fl ow.

• With modulation from 18 to 100 %, heat production is adjusted as accurately as possible to the needs of the installation.

• Various fl ue systems are possible, with either forced fl ue or chimney connection, in compliance with local specifi c regulations.

A SOLUTION FOR EVERY SITUATION

As they take up less space and are low in weight, these boilers are easy to install. They are also fi tted with devices that make easier handling during maintenance and reduce this expense in the annual budget!

• The boilers in this range are low in weight : less than 1 kg per kW of output (MC 65, MC 90 and MC 115).

• The heating pump is integrated into the MC 35E, saving space on installation.

• Access to internal components, particularly the heating body, is easy by simply removing the front panel.

• Access to the siphon and the air vent from the outside, offering appreciable time savings.

• These boilers operate on natural gas and propane (except MC 115).

• A hydraulic connection kit is available as optional equipment ; this includes sectional valves (fl ow, heating return and gas), a safety valve, a fi lling valve and an outlet for connection to an expansion tank.

EASIER ASSEMBLY AND MAINTENANCE

Innovens MC 35 to 115 boilers are wall-hung gas condensing boilers with the option of a forced fl ue or chimney outlet fi tted with a diematic 3 control panel.

Innovens - from 8 to 114 kW

A single block heating body in cast aluminium-silicium which is highly resistant to corrosion.

• Condensing: classifi cation**** EC in accordance with European Directive

94/42 EEC

• High operating effi ciency of up to 110%

• Practical access for easy maintenance

A surface total premix burner with stainless steel braid, modulating from 18 to 100% in output, with compact gas valve and extraction fan.• Optimal combustion hygiene and minimal pollutant emissions

(NOx < 45 mg/kWh and CO < 21 .5 mg/kWh)• A low noise level

A fully fi tted boiler: heating pump (MC 35 E), automatic air vent, pressure gauges, painted white cladding with phonic insulation and wall-mounted console.• So easy to install

� Heating fl ow R1 ¼ at Rp1� Heating return R1 ¼ at Rp1� Gas inlet R ¾� Condensates evacuation ext. Ø 25mm� Forced fl ue connectionØ 80/125 for MC 35E and MC 45Ø 100/150 for MC 65, MC 90 and MC 115� Automatic air vent

EXAMPLES OF CASCADE SYSTEMS

In fl oor-standing alignment : LVExample with 4 boilers

In wall-hung alignment : LWExample with 3 boilers

Back to back alignment : RGExample with 4 boilers

The INNOVENS range is fi tted with a Diematic 3 control system and a control panel.

• Access door with a reversible opening system that can be opened to the right or left.

• Option of incorporating up to two valve option boards.

• Diematic 3 control system offering the most accurate adjustment according to your thermal needs.

The control panel, pre-programmed in the factory, is easy to use and does not require any adjustment prior to start-up.

ACCURATE AND EFFICIENT BOILER CONTROL

Example of air/fl ue gas connection

ddtmer9010286_inov_ang_ok.indd 2ddtmer9010286_inov_ang_ok.indd 2 9/04/09 11:54:109/04/09 11:54:10

THE SPACE-SAVING SOLUTION

Energy-saving, environmental friendly, offering excellent performances, the new generation of De Dietrich condensing boilers satisfi es the problematics of current projects:specifi cally, they offer an annual operating effi ciency of up to 110%,a low noise level, and very low NOx and CO emissions.

Today, De Dietrich is expanding its condensing range with wall-hung boilers from 8 to 114 kW to provide an appropriate response, whatever the confi guration.

OPERATING PRINCIPLE

The Diematic 3 control system enables the connection of up to 10 boilers in cascade. Various confi gurations are possible for the evacuation of fl ue gases (C13, C33, C53, B23P). Current local regulations must be respected.

EXAMPLE OF CASCADE INSTALLATION

• They take up very little space.

• They can be fi tted alone or in cascade : - attached to a wall (7 max) - in line on the fl oor (7 max) - back to back on the fl oor (10 max ; 5+5).

• A very low noise level, thanks to a silencer fi tted to the air inlet.

• They make it possible to size the installation very precisely, practically made to measure, with an installed output of up to 1140 kW (corresponding to 10 MC 115 boilers in cascade).

• They do not impose any constraints on return temperature or minimum fl ow.

• With modulation from 18 to 100 %, heat production is adjusted as accurately as possible to the needs of the installation.

• Various fl ue systems are possible, with either forced fl ue or chimney connection, in compliance with local specifi c regulations.

A SOLUTION FOR EVERY SITUATION

As they take up less space and are low in weight, these boilers are easy to install. They are also fi tted with devices that make easier handling during maintenance and reduce this expense in the annual budget!

• The boilers in this range are low in weight : less than 1 kg per kW of output (MC 65, MC 90 and MC 115).

• The heating pump is integrated into the MC 35E, saving space on installation.

• Access to internal components, particularly the heating body, is easy by simply removing the front panel.

• Access to the siphon and the air vent from the outside, offering appreciable time savings.

• These boilers operate on natural gas and propane (except MC 115).

• A hydraulic connection kit is available as optional equipment ; this includes sectional valves (fl ow, heating return and gas), a safety valve, a fi lling valve and an outlet for connection to an expansion tank.

EASIER ASSEMBLY AND MAINTENANCE

Innovens MC 35 to 115 boilers are wall-hung gas condensing boilers with the option of a forced fl ue or chimney outlet fi tted with a diematic 3 control panel.

Innovens - from 8 to 114 kW

A single block heating body in cast aluminium-silicium which is highly resistant to corrosion.

• Condensing: classifi cation**** EC in accordance with European Directive

94/42 EEC

• High operating effi ciency of up to 110%

• Practical access for easy maintenance

A surface total premix burner with stainless steel braid, modulating from 18 to 100% in output, with compact gas valve and extraction fan.• Optimal combustion hygiene and minimal pollutant emissions

(NOx < 45 mg/kWh and CO < 21 .5 mg/kWh)• A low noise level

A fully fi tted boiler: heating pump (MC 35 E), automatic air vent, pressure gauges, painted white cladding with phonic insulation and wall-mounted console.• So easy to install

� Heating fl ow R1 ¼ at Rp1� Heating return R1 ¼ at Rp1� Gas inlet R ¾� Condensates evacuation ext. Ø 25mm� Forced fl ue connectionØ 80/125 for MC 35E and MC 45Ø 100/150 for MC 65, MC 90 and MC 115� Automatic air vent

EXAMPLES OF CASCADE SYSTEMS

In fl oor-standing alignment : LVExample with 4 boilers

In wall-hung alignment : LWExample with 3 boilers

Back to back alignment : RGExample with 4 boilers

The INNOVENS range is fi tted with a Diematic 3 control system and a control panel.

• Access door with a reversible opening system that can be opened to the right or left.

• Option of incorporating up to two valve option boards.

• Diematic 3 control system offering the most accurate adjustment according to your thermal needs.

The control panel, pre-programmed in the factory, is easy to use and does not require any adjustment prior to start-up.

ACCURATE AND EFFICIENT BOILER CONTROL

Example of air/fl ue gas connection

ddtmer9010286_inov_ang_ok.indd 2ddtmer9010286_inov_ang_ok.indd 2 9/04/09 11:54:109/04/09 11:54:10

W a l l - h u n g g a s c o n d e n s i n g b o i l e r s

*****

PROJECT

<< dedietrich-heating.com >>

>> Compact, light and powerful>> Optimised for the environment>> Cascade systems

Condensing boilers working for everyone

S u s t a i n a b l e C o n f o r t ®

Innovens

For 300 years, De Dietrich’s success was based on some key fundamental values: quality, reliability, durability.Through its concern for the environment and for your comfort, De Dietrich has now a comprehensive understanding of the various renewable energies through multi-energy systems that protect the planet. Therefore, heating appliances which bear the De Dietrich name are at the cutting-edge of innovation and have the advantage as they benefi ts from the commitment and the on-going expertise of their 2400 employees.

De Dietrich: choosing Sustainable Comfort®

A MARK OF EXCELLENCE

InnovensPROJECT

Innovens MC boilers

Model MC 35E MC 45 MC 65 MC 90 MC 115

Max. nominal output at 40/30°C kW 35 43 65 90 114Efficiency in % LCV 100% Ave. Temp 70°C % 97,5 97,5 98,3 97,9 96,4loading on …%

30% Return Temp 30°C % 107,7 107,7 108,9 108,1 107,1a water temp. …°CPressure at boiler outlet Pa 150 150 100 160 250Water content L 5,5 5,5 6,5 7,5 7,5Weight empty kg 58 49 64 72 74

GAS CONDENSINGBOILER

LOW TEMPERATUREGAS BOILER

ENERGY PERFORMANCEp

pp

11% of heat from condensation not used

6% losses through the fl ue gases

1% losses through radiation

93% operating effi ciency

111%

par

rap

po

rt a

u P

CI

0,5% of heat from condensation not used

1% losses through the fl ue gases

0,5% losses through radiation

109% operating effi ciency

CONDENSING BOILERS FOR A BETTER USE OF ENERGY

HEATING BODY IN CAST ALUMINIUM-SILICIUM• The heating bodies in cast aluminium-

silicium are perfectly suited to condensing technology. Aluminium-silicium is resistant to the acid condensates which are a product of fl ue gases. And the silicium improves resistance to corrosion by the water used in heating.

• Aluminium is a very good heat conductor (7 times greater than steel, for example) and the exchange of heat is therefore optimised. Its low weight (3 times lighter than steel) also makes it possible to design boilers which are very easy to handle.

PROJECT : CUSTOMISED SOLUTIONS FOR THE WHOLE BUILDING

I HAVE TO OPTIMISE THE AVAILABLE PLACE

Minimum space requirement for maximum output

• 74 kg for an output of 114 kW

• Dimensions : L 500x H 940x D 450

I HAVE TO COMPLY WITHSPECIFICATIONS

Answers for the future

• NOx emissions less than 20 mg/kWh(MC 35E, 45 and 65)

• Improvement in operating effi ciency + 15% annual on LCV of up to110%

• Modulation from 18 to 100%

Réf.

3000

13 7

61 -

01/2

009.

Pho

tos

not c

ontra

ctua

lly b

indi

ng.

De Dietrich ThermiquePLC with corporate capital of m 21,686,37057, rue de la Gare - F-67580 MertzwillerTel: 03 88 80 27 00 - Fax: 03 88 80 27 99www.dedietrich-heating.com

S u s t a i n a b l e C o n f o r t ®

111%

bas

ed o

n LC

V11

1% b

ased

on

LCV

ddtmer9010286_inov_ang_ok.indd 1ddtmer9010286_inov_ang_ok.indd 1 9/04/09 11:53:589/04/09 11:53:58

W a l l - h u n g g a s c o n d e n s i n g b o i l e r s

*****

PROJECT

<< dedietrich-heating.com >>

>> Compact, light and powerful>> Optimised for the environment>> Cascade systems

Condensing boilers working for everyone

S u s t a i n a b l e C o n f o r t ®

Innovens

For 300 years, De Dietrich’s success was based on some key fundamental values: quality, reliability, durability.Through its concern for the environment and for your comfort, De Dietrich has now a comprehensive understanding of the various renewable energies through multi-energy systems that protect the planet. Therefore, heating appliances which bear the De Dietrich name are at the cutting-edge of innovation and have the advantage as they benefi ts from the commitment and the on-going expertise of their 2400 employees.

De Dietrich: choosing Sustainable Comfort®

A MARK OF EXCELLENCE

InnovensPROJECT

Innovens MC boilers

Model MC 35E MC 45 MC 65 MC 90 MC 115

Max. nominal output at 40/30°C kW 35 43 65 90 114Efficiency in % LCV 100% Ave. Temp 70°C % 97,5 97,5 98,3 97,9 96,4loading on …%

30% Return Temp 30°C % 107,7 107,7 108,9 108,1 107,1a water temp. …°CPressure at boiler outlet Pa 150 150 100 160 250Water content L 5,5 5,5 6,5 7,5 7,5Weight empty kg 58 49 64 72 74

GAS CONDENSINGBOILER

LOW TEMPERATUREGAS BOILER

ENERGY PERFORMANCE

pp

p

11% of heat from condensation not used

6% losses through the fl ue gases

1% losses through radiation

93% operating effi ciency

111%

par

rap

po

rt a

u P

CI

0,5% of heat from condensation not used

1% losses through the fl ue gases

0,5% losses through radiation

109% operating effi ciency

CONDENSING BOILERS FOR A BETTER USE OF ENERGY

HEATING BODY IN CAST ALUMINIUM-SILICIUM• The heating bodies in cast aluminium-

silicium are perfectly suited to condensing technology. Aluminium-silicium is resistant to the acid condensates which are a product of fl ue gases. And the silicium improves resistance to corrosion by the water used in heating.

• Aluminium is a very good heat conductor (7 times greater than steel, for example) and the exchange of heat is therefore optimised. Its low weight (3 times lighter than steel) also makes it possible to design boilers which are very easy to handle.

PROJECT : CUSTOMISED SOLUTIONS FOR THE WHOLE BUILDING

I HAVE TO OPTIMISE THE AVAILABLE PLACE

Minimum space requirement for maximum output

• 74 kg for an output of 114 kW

• Dimensions : L 500x H 940x D 450

I HAVE TO COMPLY WITHSPECIFICATIONS

Answers for the future

• NOx emissions less than 20 mg/kWh(MC 35E, 45 and 65)

• Improvement in operating effi ciency + 15% annual on LCV of up to110%

• Modulation from 18 to 100%

Réf.

3000

13 7

61 -

01/2

009.

Pho

tos

not c

ontra

ctua

lly b

indi

ng.

De Dietrich ThermiquePLC with corporate capital of m 21,686,37057, rue de la Gare - F-67580 MertzwillerTel: 03 88 80 27 00 - Fax: 03 88 80 27 99www.dedietrich-heating.com

S u s t a i n a b l e C o n f o r t ®

111%

bas

ed o

n LC

V11

1% b

ased

on

LCV

ddtmer9010286_inov_ang_ok.indd 1ddtmer9010286_inov_ang_ok.indd 1 9/04/09 11:53:589/04/09 11:53:58