Door bell

Door control button

Alarm intrusion system

Fire detection system (Central panel)

Indoor and outdoor light control

Access control system

Building systems status monitoring

(cooling, heating, enviromental alarms, …)

Any 110-250 V AC device

HWg-Juno 008

0 DI 8 DO

HWg-Juno 1200

12 DI 0 DO

HWg-Juno 101

1 DI 1 DO

HWg-Juno 404

4 DI 4 DO

IP CCTV

managment system

ACCESS CONTROL

SYSTEMS

www.HWg-Juno.com

HWg-Juno 404

HWg-Juno allow you to easily connect digital inputs

and outputs to your IP CCTV system.

You can simply connect Digital Inputs & Relay outputs to your current central IP video management system.

HWg-Juno allows system integrator to design system with unlimited number of dry inputs and relay outputs. HWg-Juno solves location, quantity and quality limitation of I/O ports avilable on video encoder or IP camera. HWg-Juno allow IP surveillance system manager to automate events processing using the macro scripts and customize the system. Finally no programers are needed in most IP videosur-veillance systems anymore to do system customization.

Genetec Omnicast 4.5 and newer

Genetec Security Center 5.0 (available Q1/2011)

Milestone xProtect – all versions

Griffid Monitoring Station (available Q1/2011)

SeeTec 5 (available Q1/2011)

Avigilon Control Center(available Q1/2011)

Supported IP videosurveillance systems:

HWg-Juno is typical used for integration of security and building systems:

HWg-Juno is I/O device for integration with IP CCTV.

Powered by PoE - no need for AC power outlet

HWg-Juno is independent on camera or encoder location

Range of HWg-Juno models with different I/O port count

Dedicated conector for each cable. Port status indication

LEDs

Ability to disable unused inputs and outputs ports

Remote Input mode - RIM - allow third party SW to control

HWg-Juno input using simple HTTP API

Input simulation mode - ISM - Web based control of

HWg-Juno inputs allow IP CCTV system testing and operator

training

Relay outputs uses relays with NO/COM/NC contacts.

Output state memory - OSM - reduce duration of relay

output state outage. HWg-Juno stores last value of relay

outputs and resume it state after power is restored.

RIM (Remote Input Mode) support, Input controlled remotely over HTTP API

2 Years as standard (extension possible up to 6 years) Warranty

29 x 97 x 77 [mm] / 350 g

> 100 000 hours Operating: -10 to +65 °C (5-95 % RH) / Storage: -25 to +85 °C

Dimensions / Weight

MTBF Temperature range

Other parameters

OSM (Output State Memory) – set last output state after device power-up OSM mode

State 1 (On) is indicated by LED on all outputs

RJ45 - IEEE 802.3af - require included PoE splitter adaptor

Basic Authorization, Secure Mode Password protection Security

5V DC / 0.3A (max 1.5 W) - Jack Ø3.5 x 1.35 / 10 [mm] PoE (Power over Ethernet) Device power

POWER input

1A / 36V DC 4x Digital outputs, Type C Relay (NC/COM/NO)

State Indication

Max. load Type

Outputs

ISM (Input Simulation Mode) support, Input controlled over the WEB interface

+ RIM mode

+ ISM mode State 1 (On) is indicated by LED on all inputs

4x Digital Input

Indication

Interface

Inputs (DI for Dry Contact)

Genetec 1.4a, PSIA

Max 2 sensors / max 10m HWg original accessories: 1-Wire or 1-Wire UNI (RJ11)

Limitations Type SENSORS

IP: ARP, TCP/IP (HTTP, NTP), UDP (ZeroConfig, HWg config) RJ45 (10BASE-T / 100BASE-Tx) – 10 Mbps or 100 Mbps network compatible

+ IP CCTV protocols

Supported protocols Interface

ETHERNET

HWg-Juno deliver unique mix of features needed for

IP security systems:

HWg-Juno unique features:

www.HWg-Juno.com