hmc1086f10 (v06.1017) - analog devices
TRANSCRIPT
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
1
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.comApplication Support: Phone: 1-800-ANALOG-D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
Functional Diagram
FeaturesHigh psat: +44.5 dBm
power Gain at psat: 11 dB
High output ip3: +46 dBm
small signal Gain: 23 dB
supply Voltage: Vdd = +28V @ 1100 mA
50 ohm matched input/output
10-lead flange mount package
Typical ApplicationsThe HmC1086f10 is ideal for:
• Test instrumentation
• General Communications
• radar
• ew/eCm
general DescriptionThe HmC1086f10 is a 25w Gallium nitride (Gan) mmiC power Amplifier which operates between 2 and 6 GHz, and is provided in a 10-lead flange mount package. The amplifier typically provides 23 dB of small signal gain, +44.5 dBm saturated output power, and delivers +46 dBm output ip3 at +33 dBm output power per tone. The amplifier draws 1100 mA quiescent current from a +28V DC supply. The rf i/os are DC blocked and matched to 50 ohms for ease of use.
electrical Specifications, TA = +25° C, Vgg = Vgg1 = Vgg2, Vdd = Vdd1 = Vdd2 = +28V,Idd = 1100 mA [1]
parameter min. Typ. max. min. Typ. max. Units
frequency range 2 - 4 4 - 6 GHz
small signal Gain 20 23 21 24 dB
Gain flatness ±1 ±0.5 dB
Gain Variation over Temperature 0.03 0.03 dB/ °C
input return loss 15 17 dB
output return loss 12 12 dB
output power for 4dB Compression (p4dB) 41 41 dBm
power Gain for 4dB Compression (p4dB) 20 20 dB
saturated output power (psat) 44.5 44.5 dBm
output Third order intercept (ip3) [2] 46 46 dBm
power Added efficiency (pAe) 35 32 %
Total supply Current (id1 + id2) 1100 1100 mA
[1] Adjust Vgg between -8 to 0V to achieve idd = 1100 mA typical.
[2] measurement taken at pout / tone = +33 dBm.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
2
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
output Return loss vs. Temperature
gain & Return loss gain vs. Temperature
Input Return loss vs. Temperature
-40
-30
-20
-10
0
10
20
30
1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
S21 S11 S22
Res
pons
e (d
B)
FREQUENCY (GHz)
10
15
20
25
30
1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5
25 C 85 C -40 C
Gai
n (d
B)
FREQUENCY (GHz)
gain vs. Vdd
10
15
20
25
30
1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5
24V 28V 32V
Gai
n (d
B)
FREQUENCY (GHz)
-40
-35
-30
-25
-20
-15
-10
-5
0
1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5
25 C 85 C -40 C
Ret
urn
Loss
(dB
)
FREQUENCY (GHz)
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5
25 C 85 C -40 C
Ret
urn
Loss
(dB
)
FREQUENCY (GHz)
Pout vs. Frequency
25
30
35
40
45
50
2 3 4 5 6
P1dB P4dB Psat
Pou
t (dB
m)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
3
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
Psat vs. Temperature Psat vs. Supply Voltage
P4dB vs. Temperature P4dB vs. Supply Voltage
30
35
40
45
50
2 3 4 5 6
+25 C +85 C -40 C
Psa
t (dB
m)
FREQUENCY (GHz)
30
35
40
45
50
2 3 4 5 6
24V 28V 32V
Psa
t (dB
m)
FREQUENCY (GHz)
P4dB vs. Supply Current
30
35
40
45
50
2 3 4 5 6
550 mA 1100 mA 1650 mA
Psa
t (dB
m)
FREQUENCY (GHz)
Psat vs. Supply Current
30
35
40
45
50
2 3 4 5 6
+25 C +85 C -40 C
P4d
B (
dBm
)
FREQUENCY (GHz)
30
35
40
45
50
2 3 4 5 6
24V 28V 32V
P4d
B (
dBm
)
FREQUENCY (GHz)
30
35
40
45
50
2 3 4 5 6
550 mA 1100 mA 1650 mA
P4d
B (
dBm
)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
4
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
output IP3 vs. Temperature, Pout/tone = +33 dBm
output IP3 vs. Supply Voltage, Pout/tone = +33 dBm
output IP3 vs. Supply Current, Pout/tone = +33 dBm
40
42
44
46
48
50
2 3 4 5 6
+25 C +85 C -40 C
FREQUENCY (GHz)
IP3
(dB
m)
40
42
44
46
48
50
2 3 4 5 6
24V 28V 32V
FREQUENCY (GHz)
IP3
(dB
m)
40
42
44
46
48
50
2 3 4 5 6
550 mA 1100 mA 1650 mA
FREQUENCY (GHz)
IP3
(dB
m)
output IM3 @ Vdd= +24V output IM3 @ Vdd= +28V
10
20
30
40
50
26 28 30 32 34 36 38 40
2 GHz3 GHz4 GHz
5 GHz6 GHz
Pout/tone(dBm)
IM3
(dB
c)
10
20
30
40
50
26 28 30 32 34 36 38 40
2 GHz3 GHz4 GHz
5 GHz6 GHz
Pout/TONE (dBm)
IM3
(dB
c)
Power gain vs. Frequency
0
5
10
15
20
25
30
2 3 4 5 6
P4dBm Psat
PO
WE
R G
AIN
(dB
)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
5
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
Power Compression @ 2 gHz
Power Compression @ 4 gHz Power Compression @ 6 gHz
0
5
10
15
20
25
30
35
40
45
50
900
1110
1320
1530
1740
1950
2160
2370
2580
2790
3000
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
Idd
Pout Gain PAE
Pou
t(dB
m),
GA
IN(d
B),
PA
E(%
)
Idd (mA
)
INPUT POWER (dBm)
0
5
10
15
20
25
30
35
40
45
50
900
1140
1380
1620
1860
2100
2340
2580
2820
3060
3300
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
Idd
Pout Gain PAE
Pou
t(dB
m),
GA
IN(d
B),
PA
E(%
)
Idd (mA
)
INPUT POWER (dBm)
0
5
10
15
20
25
30
35
40
45
50
900
1110
1320
1530
1740
1950
2160
2370
2580
2790
3000
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
Idd
Pout Gain PAE
Pou
t(dB
m),
GA
IN(d
B),
PA
E(%
)
Idd (mA
)
INPUT POWER (dBm)
gain & Power vs.Supply Voltage @ 4 gHz
gain & Power vs.Supply Current @ 4 gHz
20
25
30
35
40
45
50
24 26 28 30 32
GAIN(dB)P4dB(dBm)
Psat(dBm)
Vdd (V)
Gai
n (d
B),
P4d
B (
dBm
), P
sat (
dBm
)
20
25
30
35
40
45
50
550 650 750 850 950 1050 1150 1250 1350 1450 1550 1650
GAIN(dB)P4dB(dBm)
Psat(dBm)
Idd (mA)
Gai
n (d
B),
P4d
B (
dBm
), P
sat (
dBm
)
output IM3 @ Vdd= +32V
10
20
30
40
50
26 28 30 32 34 36 38 40
2 GHz3 GHz4 GHz
5 GHz6 GHz
Pout/TONE (dBm)
IM3
(dB
c)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
6
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
Reverse Isolation vs. Temperature
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
2 3 4 5 6
+25 C +85 C -40 C
FREQUENCY (GHz)
ISO
LAT
ION
(dB
)
Second Harmonics vs. Temperature
Second Harmonics vs. Supply Voltage Second Harmonics vs. Pin
Power Dissipation
0
10
20
30
40
50
60
70
80
90
2 3 4 5 6
+25 C +85 C -40 C
SE
CO
ND
HA
RM
ON
IC (
dBc)
FREQUENCY(GHz)
0
10
20
30
40
50
60
70
80
90
2 3 4 5 6
24V 28V 32V
SE
CO
ND
HA
RM
ON
IC (
dBc)
FREQUENCY(GHz)
0
10
20
30
40
50
60
70
80
90
2 3 4 5 6
+9 dBm+15 dBm+21 dBm
+27 dBm+33 dBm
SE
CO
ND
HA
RM
ON
IC (
dBc)
FREQUENCY(GHz)
20
25
30
35
40
45
50
55
60
6 9 12 15 18 21 24 27 30 33
2 GHz3 GHz
4 GHz5 GHz
6 GHz
PO
WE
R D
ISS
IPA
TIO
N (
W)
INPUT POWER (dBm)-180
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
100 1K 10K 100K 1M
PH
AS
E N
OIS
E (
dB
c/H
z)
OFFSET FREQUENCY (Hz)
Additive Phase noise Vs offset Frequency, RF Frequency = 4 gHz, RF Input Power = 27 dBm (P1dB)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
7
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
Absolute Maximum RatingsDrain Bias Voltage (Vdd) +32 Vdc
Gate Bias Voltage (Vgg) -8 to 0 Vdc
rf input power (rfin) +33 dBm
Channel Temperature 225 °C
maximum pdiss (T = 85 °C) (derate 432 mw/°C above 85 °C)
60.5w
Thermal resistance (channel to flange bottom)
2.31 °C/w
maximum forwardGate Current (mA)
11 mA
maximum Vswr [1] 6:1
storage Temperature -65 to 150 °C [2]
operating Temperature -40 to 85 °C
[1] restricted by maximum power dissipation.
[2] This device is not surface mountable and is not intended nor suitable to be used in a solder reflow process. This device must not be exposed to ambient temperatures above +150°C.
Typical Supply Current vs. Vdd
Vdd (V) idd (mA)
+24 1100
+28 1100
+32 1100
Adjust Vgg to achieve idd = 1100 mA
eleCTrosTATiC sensiTiVe DeViCeoBserVe HAnDlinG preCAUTions
Amplifier Turn-on Procedure:1.) set Vgg to -5V.
2.) set Vdd to +28V.
3.) ramp gate voltage until quiescent drain current = 1100 mA.
4.) Apply rf input power.
Amplifier Turn-off Procedure:1.) remove rf input power.
2.) set Vgg to -5V.
3.) set Vdd to 0V.
4.) set Vgg to 0V.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
8
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
outline Drawing
Package Informationpart number package Body material lead finish msl rating package marking [1]
HmC1086f10 Copper 15 Tungston 85 niAu n/A [2] H1086XXXX
[1] 4-Digit lot number XXXX[2] This device is not rated for moisture sensitivity level. The HmC1086f10 is a non-hermetic, air cavity device which is not surface mountable
and is not intended nor suitable to be used in a solder reflow process.
10-Lead Ceramic Leaded Chip Carrier [LDCC](EJ-10-1)
Dimensions shown in inches
TOP VIEW
0.450
0.682
0.010
0.576
0.100
0.053
0.050
0.342
0.350 SQ0.388
0.288
0.138
0.116 PIN 1INDICATOR
1
5
10
6
Ø 0.070
0.053
0.075
0.042
0.025SIDE VIEW
04-1
4-20
16-A
PKG
-005
116
10-lead Ceramic leaded Chip Carrier [lDCC](eJ-10-1)
Dimensions shown in inches
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
9
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
pin number function Description interface schematic
1, 5 Vgg2 Gate control voltage for second stage.
2, 4 Vgg1 Gate control voltage for first stage.
3 rfin This pin is DC coupled and matched to 50 ohms.
6, 10 Vdd1,2 Drain bias for first and second stage
7, 9 nC These pins are not connected internally.
8 rfoUT This pad is rf coupled and matched to 50 ohms.
package Base
GnDThe package base must be mounted to a suitable heat
sink for rf & DC ground. recommended mounting screws are #0-80 socket cap screws.
Pin Descriptions
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
10
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
Application Circuit
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
11
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
evaluation PCB
evaluation order Informationitem Contents part number
evaluation pCB HmC1086f10 evaluation pCB eVAl01-HmC1086f10 [1]
[1] reference this number when ordering evaluation pCB
list of Materials for evaluation PCB eVAl01-HMC1086F10
item Description
J2, J3 sri K Connector
J1 DC Connector
J4, J5 preform jumpers
C1 - C6 1 uf Capacitor, 0602 pkg.
C7 - C8 10 uf Capacitor, 1210 pkg.
U1 HmC1086f10
pCB [1] 600-00619-00 evaluation pCB
[1] Circuit Board material: rogers 4350 or Arlon 25fr
The circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Analog Devices, upon request.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Am
pli
fie
rs
- l
ine
Ar
& p
ow
er
- s
mT
12
HMC1086F10v06.1017
25 WATT FlAnge MounT gAn MMIC PoWeR AMPlIFIeR, 2 - 6 gHz
notes: