P R O D U C T SM O R E T O P P E R F O R M I N G A R T ’ S W AY

High Lift Dump Box 9015/9016 Specifications

Art’s Way Manufacturing Co., Inc.rong, IA 50514

sales@artsway-mfg.com www.artsway-mfg.com

Art’s Way Manufacturing Co., Inc. reserves theright to change design or specifications withoutnotice. Information contained herein is general andis not intended for specific application purposes.Photographs contained herein may be displayed with safety shields and/or guards removed to show mechanical functions only. AW-HLDB113

www.artsway-mfg.commeeting your needs in the field and farmyard

MODELShipping Weight

TANK DESIGNCapacity StruckCapacity w/RoofDumping CapacityCycle Time (Depends on hydraulic cap of harvester)

Tractor Hydraulic PressureDirection of DumpDumping AngleWeigh ScaleDump Height at PivotOptional 6 in. Riser KitOverall Height w/RoofTank LengthDump Clearance at Pouring LipSide Material

Pouring LipLoading HeightTank Pivot PinsELEVATORRocking BolsterCounterweight BoxPre LiftSide ShiftStabilizer CylindersLift CylindersTilt CylindersHydraulic FittingsElevator Lock-out Mechanism

RUNNING GEARHubs & SpindlesTie Rod EndsTread WidthTurning RadiusTelescoping PoleReachBrakesReversible for Right or Left DumpRIMS & TIRESStandardOptionalSCALES

4 WHEEL WAGON 9015Approx. 9000 lbs.

655 cu. ft.950 cu. ft.24,000 lbs.Approx. 1 min.Min. 2250Left Std., Right Opt.46 DegreesNoApprox. 11 ft. 9 in.Yes (12 ft. 3 in.)Approx. 13 ft. 6 in.15 ft.Approx. 10 ft. 10 in.Smooth Steel Reinforced w/ Internal Bracing

17 1/2 in.123 1/2 in.Greaseable 1 1/4 in.

Integral PartStd. 24 in.13 1/2 in.2Master/Slave_ _ _ _ _

O-ring StyleRotating Lockout BlockSpring Loaded Positioning2nd Stage Safety Catch

8 Bolt 3 in.Auto Ball Joint96 in. or 120 in.57 DegreesStd.C-ChannelOpt.No

16.5 x 22.5 Used Truck Tires

Opt.

2 WHEEL CART 9015Approx. 9500 lbs.

655 cu. ft.950 cu. ft.24,000 lbs.Approx. 1 min.Min. 2250Right or Left46 DegreesOpt.Approx. 11 ft. 9 in.N/AApprox. 13 ft. 6 in.15 ft.Approx. 10 ft. 10 in.Smooth Steel Reinforced w/ Internal Bracing

17 1/2 in.123 1/2 in.Greaseable 1 1/4 in.

_ _ _ _ _

Opt.24 in.13 1/2 in._ _ _ _ _

Master/Slave_ _ _ _ _

O-ring StyleRotating Lockout BlockSpring Loaded Positioning2nd Stage Safety Catch

10 Bolt 4 1/2 in._ _ _ _ _

Approx. 105 in._ _ _ _ _

N/A_ _ _ _ _

N/AYes

18 in. x 38 in. Rims18.4 x 38 in. 14 Ply Bias Ply

Opt.

4 WHEEL WAGON 9016Approx. 12,000 lbs.

870 cu. ft.1,212 cu. ft.30,000 lbs.Approx. 1 1/2 min.Min. 2250Left Std., Right Opt.47 DegreesNo10 ft. - 15 ft._ _ _ _ _

Approx. 13 ft. 6 in.16 ft.93 in. - 153 in.Smooth Steel Reinforced w/ Internal Bracing

39 in.Approx. 116 in.Greaseable 1 1/4 in.

Integral PartStd. 12 in. - 72 in.4 1/4 in. - 25 1/2 in.1Master/Slave2 in. - 4 in.O-ring Style

_ _ _ _ _

8 Bolt 3 1/2 in.Auto Ball JointApprox. 120 in.57 DegreesStd.C-ChannelOpt.No

16.5 x 22.5 Used Truck Tires

Opt.

2 WHEEL CART 9016Approx. 13,000 lbs.

870 cu. ft.1,212 cu. ft.30,000 lbs.Approx. 1 1/2 min.Min. 2250Left Std., Right Opt.47 DegreesOpt.10 ft. - 15 ft._ _ _ _ _

Approx. 13 ft. 6 in.16 ft.93 in. - 153 in.Smooth Steel Reinforced w/ Internal Bracing

39 in.Approx. 116 in.Greaseable 1 1/4 in.

_ _ _ _ _

Opt. 0 in. - 72 in.0 in. - 25 1/2 in._ _ _ _ _

Master/Slave2 in. - 4 in.O-ring Style

_ _ _ _ _

10 Bolt 4 1/2 in._ _ _ _ _

120 in._ _ _ _ _

Std._ _ _ _ _

N/AYes (w/o roof)

27 in. x 32 in. Rims30.5 x 32 in.16 Ply Bias Ply

Opt.

High Lift Dump BoxModels 9015/9016

More capacity. Higher lift. Shorter cycle time. Fast payback.

Reaching higher levels of productivity Creating a stable, tough, agile foundation Big Acreage operators are continually discovering new ways to cope with short harvest windows. With Miller Pro Dump Boxes, you can experience virtually nonstop, high volume harvesting. Because of their capacity, high lift and short cycle time, they’ll help you bring in higher quality forage, faster. And you’ll save money by not having extra transport vehicles with drivers waiting in the field.

Higher lift and better reach Reach over and into receiver boxes and trucks with dump heights at pivot from 11 ft. 9 inches for the 9015 model. An optional riser kit increases the pivot point 6 inches for the 9015. As the boxes begin their lift, they also side shift to move closer to the eceiving vehicle.

Impressive capacitiesModel 9015 comes with a 15 ft. box length with a capacity of 950 cu. ft. with roof. Lift and dump up to 24,000 lbs.

Slaved cylinder elevator raises loads evenly…requiring less oilForage choppers naturally load dump boxes heavier to the rear. Miller Pro dump boxes feature master and slave cylinders to raise their loads uniformly without need for straightening cables and pulleys. With this system, the large 5 inch master and 4 inch slave cylinders require less oil.

Advanced elevator lockout systemOn models with rocking bolsters, as the box begins its lift, stabilizer cylinder(s) lock out the rocking bolster to prevent its movement. On the 9015, as the box begins its dump rotation, spring loaded latches lock the slide tubes. The design incorporates a backup secondary lock.

Faster cycle time lets choppers spend more time choppingBecause this highly efficient elevator lift design requires less oil, it creates a faster time cycle of just 1 to 1 1/2 minutes (depending on harvesting unit hydraulics).

Easier dumpingExtended pouring lip, a 46-47 inch dumping angle and smooth steel sides helps material slide out of the box and into the center of the receiver. Left side dumping is standard. Right hand dumping is optional on most models.

Automatic opening roofThe roof opens and closes automatically when the box tilts. The steel mesh roof panels let air out, and light in to see load level. Fill opening is wide and high.

4 wheel wagon modelsHayfields can be anything but perfectly flat. Stability is critical to favorable dump box operation. Miller Pro dump boxes have massive undercarriages, a wide stance and counterweight box. They flex when needed, and become rigid during the dumping cycle. They have automotive design steering and a tight turning radius to follow big self-propelled choppers.

Ball joint steering and short turning radius• Automotive ball joint steering along with C-channel reach

provide improved towing and long-lasting wear ability• Tight 57 inch turning radius easily follows severe chopper turns

• Massive spindles with 8 bolt hubs easily handle heavy loads

and rough terrain• Heavy duty tire options

• Telescoping pole with easy-lift spring

• Red and amber transport lights plus SMV sign and reflective

decals are standard

Wide stance stability• Tread width up to 10 ft.

Hydraulic value mechanically locks oil in stabilizer cylinder(s) when

dump box is elevated (4 wheel only).

Counter weight for maximum stability.

2 wheel cart modelsThe 9015 and 9016 dump boxes are available with 2 wheel cart chassis. Ideal for wet fields. Rugged understructure rolls through tough conditions.• Reversible hitch for left or right side dump

• Axles adjust fore and aft for best weight distribution

• Massive 4 ½ inch bolt-in cold rolled spindles

with heavy duty 10 bolt hubs with studs and nuts• Model 9015 uses a 18 in. wide x 38 in. diameter

rims for use with 20.8 x 38 in. 14 ply bias tires

• Swivel hitch clevis adjustable up and down

• 9015 high strength hitch tube incorporates a

7,000 lb. “crank style” jack• Weigh scale system is optional

Rugged all-steel construction• Smooth steel box sides reinforced with internal bracing

• High-strength heavy duty construction throughout

• Large capacity hydraulics with 5 inch master and 4 inch slave

cylinders (9016 has 4 inch tilt cylinders)• Massive greaseable hinges (box to elevator) for added strength

• Heavy duty running gear designed for high load capacity

Spring loaded latches include primary and secondary backup lock

as box rotates for dump.

Massive hinge and reinforcing bushings with greaseable hinge pin.

2 wheel wagon model9015 or 9016 available

4 wheel wagon model9015 or 9016 available

Reaching higher levels of productivity Creating a stable, tough, agile foundation Big Acreage operators are continually discovering new ways to cope with short harvest windows. With Miller Pro Dump Boxes, you can experience virtually nonstop, high volume harvesting. Because of their capacity, high lift and short cycle time, they’ll help you bring in higher quality forage, faster. And you’ll save money by not having extra transport vehicles with drivers waiting in the field.

Higher lift and better reach Reach over and into receiver boxes and trucks with dump heights at pivot from 11 ft. 9 inches for the 9015 model. An optional riser kit increases the pivot point 6 inches for the 9015. As the boxes begin their lift, they also side shift to move closer to the eceiving vehicle.

Impressive capacitiesModel 9015 comes with a 15 ft. box length with a capacity of 950 cu. ft. with roof. Lift and dump up to 24,000 lbs.

Slaved cylinder elevator raises loads evenly…requiring less oilForage choppers naturally load dump boxes heavier to the rear. Miller Pro dump boxes feature master and slave cylinders to raise their loads uniformly without need for straightening cables and pulleys. With this system, the large 5 inch master and 4 inch slave cylinders require less oil.

Advanced elevator lockout systemOn models with rocking bolsters, as the box begins its lift, stabilizer cylinder(s) lock out the rocking bolster to prevent its movement. On the 9015, as the box begins its dump rotation, spring loaded latches lock the slide tubes. The design incorporates a backup secondary lock.

Faster cycle time lets choppers spend more time choppingBecause this highly efficient elevator lift design requires less oil, it creates a faster time cycle of just 1 to 1 1/2 minutes (depending on harvesting unit hydraulics).

Easier dumpingExtended pouring lip, a 46-47 inch dumping angle and smooth steel sides helps material slide out of the box and into the center of the receiver. Left side dumping is standard. Right hand dumping is optional on most models.

Automatic opening roofThe roof opens and closes automatically when the box tilts. The steel mesh roof panels let air out, and light in to see load level. Fill opening is wide and high.

4 wheel wagon modelsHayfields can be anything but perfectly flat. Stability is critical to favorable dump box operation. Miller Pro dump boxes have massive undercarriages, a wide stance and counterweight box. They flex when needed, and become rigid during the dumping cycle. They have automotive design steering and a tight turning radius to follow big self-propelled choppers.

Ball joint steering and short turning radius• Automotive ball joint steering along with C-channel reach

provide improved towing and long-lasting wear ability• Tight 57 inch turning radius easily follows severe chopper turns

• Massive spindles with 8 bolt hubs easily handle heavy loads

and rough terrain• Heavy duty tire options

• Telescoping pole with easy-lift spring

• Red and amber transport lights plus SMV sign and reflective

decals are standard

Wide stance stability• Tread width up to 10 ft.

Hydraulic value mechanically locks oil in stabilizer cylinder(s) when

dump box is elevated (4 wheel only).

Counter weight for maximum stability.

2 wheel cart modelsThe 9015 and 9016 dump boxes are available with 2 wheel cart chassis. Ideal for wet fields. Rugged understructure rolls through tough conditions.• Reversible hitch for left or right side dump

• Axles adjust fore and aft for best weight distribution

• Massive 4 ½ inch bolt-in cold rolled spindles

with heavy duty 10 bolt hubs with studs and nuts• Model 9015 uses a 18 in. wide x 38 in. diameter

rims for use with 20.8 x 38 in. 14 ply bias tires

• Swivel hitch clevis adjustable up and down

• 9015 high strength hitch tube incorporates a

7,000 lb. “crank style” jack• Weigh scale system is optional

Rugged all-steel construction• Smooth steel box sides reinforced with internal bracing

• High-strength heavy duty construction throughout

• Large capacity hydraulics with 5 inch master and 4 inch slave

cylinders (9016 has 4 inch tilt cylinders)• Massive greaseable hinges (box to elevator) for added strength

• Heavy duty running gear designed for high load capacity

Spring loaded latches include primary and secondary backup lock

as box rotates for dump.

Massive hinge and reinforcing bushings with greaseable hinge pin.

2 wheel wagon model9015 or 9016 available

4 wheel wagon model9015 or 9016 available

P R O D U C T SM O R E T O P P E R F O R M I N G A R T ’ S W AY

High Lift Dump Box 9015/9016 Specifications

Art’s Way Manufacturing Co., Inc.rong, IA 50514

sales@artsway-mfg.com www.artsway-mfg.com

Art’s Way Manufacturing Co., Inc. reserves theright to change design or specifications withoutnotice. Information contained herein is general andis not intended for specific application purposes.Photographs contained herein may be displayed with safety shields and/or guards removed to show mechanical functions only. AW-HLDB113

www.artsway-mfg.commeeting your needs in the field and farmyard

MODELShipping Weight

TANK DESIGNCapacity StruckCapacity w/RoofDumping CapacityCycle Time (Depends on hydraulic cap of harvester)

Tractor Hydraulic PressureDirection of DumpDumping AngleWeigh ScaleDump Height at PivotOptional 6 in. Riser KitOverall Height w/RoofTank LengthDump Clearance at Pouring LipSide Material

Pouring LipLoading HeightTank Pivot PinsELEVATORRocking BolsterCounterweight BoxPre LiftSide ShiftStabilizer CylindersLift CylindersTilt CylindersHydraulic FittingsElevator Lock-out Mechanism

RUNNING GEARHubs & SpindlesTie Rod EndsTread WidthTurning RadiusTelescoping PoleReachBrakesReversible for Right or Left DumpRIMS & TIRESStandardOptionalSCALES

4 WHEEL WAGON 9015Approx. 9000 lbs.

655 cu. ft.950 cu. ft.24,000 lbs.Approx. 1 min.Min. 2250Left Std., Right Opt.46 DegreesNoApprox. 11 ft. 9 in.Yes (12 ft. 3 in.)Approx. 13 ft. 6 in.15 ft.Approx. 10 ft. 10 in.Smooth Steel Reinforced w/ Internal Bracing

17 1/2 in.123 1/2 in.Greaseable 1 1/4 in.

Integral PartStd. 24 in.13 1/2 in.2Master/Slave_ _ _ _ _

O-ring StyleRotating Lockout BlockSpring Loaded Positioning2nd Stage Safety Catch

8 Bolt 3 in.Auto Ball Joint96 in. or 120 in.57 DegreesStd.C-ChannelOpt.No

16.5 x 22.5 Used Truck Tires

Opt.

2 WHEEL CART 9015Approx. 9500 lbs.

655 cu. ft.950 cu. ft.24,000 lbs.Approx. 1 min.Min. 2250Right or Left46 DegreesOpt.Approx. 11 ft. 9 in.N/AApprox. 13 ft. 6 in.15 ft.Approx. 10 ft. 10 in.Smooth Steel Reinforced w/ Internal Bracing

17 1/2 in.123 1/2 in.Greaseable 1 1/4 in.

_ _ _ _ _

Opt.24 in.13 1/2 in._ _ _ _ _

Master/Slave_ _ _ _ _

O-ring StyleRotating Lockout BlockSpring Loaded Positioning2nd Stage Safety Catch

10 Bolt 4 1/2 in._ _ _ _ _

Approx. 105 in._ _ _ _ _

N/A_ _ _ _ _

N/AYes

18 in. x 38 in. Rims18.4 x 38 in. 14 Ply Bias Ply

Opt.

4 WHEEL WAGON 9016Approx. 12,000 lbs.

870 cu. ft.1,212 cu. ft.30,000 lbs.Approx. 1 1/2 min.Min. 2250Left Std., Right Opt.47 DegreesNo10 ft. - 15 ft._ _ _ _ _

Approx. 13 ft. 6 in.16 ft.93 in. - 153 in.Smooth Steel Reinforced w/ Internal Bracing

39 in.Approx. 116 in.Greaseable 1 1/4 in.

Integral PartStd. 12 in. - 72 in.4 1/4 in. - 25 1/2 in.1Master/Slave2 in. - 4 in.O-ring Style

_ _ _ _ _

8 Bolt 3 1/2 in.Auto Ball JointApprox. 120 in.57 DegreesStd.C-ChannelOpt.No

16.5 x 22.5 Used Truck Tires

Opt.

2 WHEEL CART 9016Approx. 13,000 lbs.

870 cu. ft.1,212 cu. ft.30,000 lbs.Approx. 1 1/2 min.Min. 2250Left Std., Right Opt.47 DegreesOpt.10 ft. - 15 ft._ _ _ _ _

Approx. 13 ft. 6 in.16 ft.93 in. - 153 in.Smooth Steel Reinforced w/ Internal Bracing

39 in.Approx. 116 in.Greaseable 1 1/4 in.

_ _ _ _ _

Opt. 0 in. - 72 in.0 in. - 25 1/2 in._ _ _ _ _

Master/Slave2 in. - 4 in.O-ring Style

_ _ _ _ _

10 Bolt 4 1/2 in._ _ _ _ _

120 in._ _ _ _ _

Std._ _ _ _ _

N/AYes (w/o roof)

27 in. x 32 in. Rims30.5 x 32 in.16 Ply Bias Ply

Opt.

High Lift Dump BoxModels 9015/9016

More capacity. Higher lift. Shorter cycle time. Fast payback.