hi-o technology - assaabloyopeningsolutions.kr · hi-o technology is based on can (controller area...

Hi-O® Technology

MS0

823

AAA

-CAT

-077

02

/10

1

Introducing Hi-O Technology 2

Hi-O System Overview 4

Hi-O Technology – Installation 5

3570 Series Electric Mortice Lock 6

811C Series Motor Lock 8

ES2000 Series Monitored Electric Strike 10

HT-PB Series Push Buttons 12

TKN Series Push Buttons 13

8002 Electromechanical Door Operator 14

HID iClass Readers 16

Accessories - Cable and Connectors 18

Contents

2 hi-o.com.au

Introducing Hi-O® Technology

In the 21st century, the world has not become a safer place and as the demand for security solutions is constantly increasing. Information technology is responding by developing electronic security solutions.

The demand for robust and sophisticated hardware like electromechanical locks is not decreasing. On the contrary trends show an increased convergence between IT networks, security software and electromechanical hardware, such as locks, door openers, strikes and emergency solutions.

As security professionals seek better ways to manage door openings, ASSA ABLOY Australia offers Hi-O (Highly intelligent Opening). Hi-O is a new standardised technology for control and security of door opening solutions. It enables detailed door monitoring, real time diagnostics and sharing of opening information. Hi-O offers easier installations and troubleshooting, and extended life of the components – bringing peace of mind for the building owner.

An electromechanical lock could be equipped with sensors to identify when the performance of the of motor is degrading. The need for maintenance could then be reported via a LAN to trigger an SMS or email to a maintenance technician with detailed service information.

Hi-O technology is based on CAN (Controller Area Network), a well proven and reliable standard that is used in most new cars today and many other industrial and consumer products.

All devices equipped with Hi-O technology communicate over a single 4 wire CANBUS that has two wires for data and two wires for power – this creates a plug and play system that greatly reduces installation time, cost and complexity.

Hi-O Basics• Standardised communication platform

developed by ASSA ABLOY for electromechanical devices – designed to simplify installation, service and upgrade

• Provides intelligence and communication protocol to door components

• Firmware running on micro controller in each electromechanical device

• All devices connected with 4 wires. 2 for data and 2 for power

• Based on CAN Open standard – used for many years in the car industry that allows connected devices to exchange and share encrypted information

3

Benefits and Capabilities

Hi-O Technology: Simplified Installation and Maintenance Enhanced Functionality and SecurityWith Hi-O, all electromechanical devices have embedded intelligence for sharing encrypted information. Each device communicates its status and capabilities to the other devices, so the opening operates efficiently at all times.

• Installations are faster and require virtually no troubleshooting

• Standardised way to connect all devices – 4 wires

• Plug and play – automatic configuration with report generation

• Access control and door monitoring information pinpoint what’s happening at the door opening

• Components detect tampering and operate accordingly to preserve security and functionality

• Advanced diagnostics - maintenance becomes predictive instead of reactive

• Encryption over the Hi-O network

For Security Consultants, Architects, Integrators and Project PlannersWith it’s built in intelligence, plug and play connectors, and ability to work with third party enterprise software, Hi-O is easy to specify and integrate into any building. Remote diagnostic capabilities streamline servicing and increase security.

For Building Owners and Facility ManagersThe plug and play Hi-O system is easy to install and maintain, meaning less disruption at the site. Future upgrading of components will be simple because components use embedded intelligence for automatic configuration onto the network. Hi-O enables easier and more precise monitoring of what’s occurring at the opening.

For Locksmiths and InstallersPlug and play Hi-O components wired with standardised Molex connectors ensure only correct connections can be established. Automatic configuration immediately activates the system and diagnostics identify devices needing adjustment, making Hi-O easy to install and initiate.

4 hi-o.com.au

Installation and ConfigurationEach individual door is its own Hi-O network in which electromechanical devices are typically connected in a daisy chain configuration, by simple method of cables and connectors. This connection between devices creates the CANBUS that enables communication between the devices.

From the door, there is only one four wire cable – two wires for power and two wires for data. This CANBUS is designed to connect directly to a third party door access controller, that then converts signals from the CANBUS into existing protocols used today – e.g. RS485

Hi-O compatible product will operate with default configuration as soon as power is applied. There is no need to make any settings, it all works right out of the box. In order to configure a Hi-O compatible system to specific needs, the Hi-O Manager tool is used. Hi-O Manager is a PC based application that allows modification of Hi-O device parameters and system behaviour. This is generally connected via an access point somewhere on the CANBUS through simple connectors.

Hi-O System Overview

Hi-O Manager(application used for installation and configuration)

Third Party Enterprise Software with Remote Hi-O Manager Capabilites

Access Point

Third Party Controller, acting as Hi-O Gateway

Electronic access control panel

5

Hi-O Technology – Installation

The Intelligent door – a typical door installationHi-O Installations are designed to be fast and accurate with minimal termination of wiring required on site. A series of pre wired connectors, cables and plugs are available for various applications, depending on the devices required (see page 20). All devices use standard Molex connectors.

Using these connectors each device is simply plugged in, and then in a daisy chain configuration it is plugged into the next device. Once all devices are connected there is one four wire cable to terminate at the top of the door. In many cases this can be simply plugged into the Hi-O gateway or door access controller.

Every Hi-O device has only four wires:

• Red wire: positive

• Black wire: negative

• White wire: CAN Data High (CAN_H)

• Brown wire: CAN Data Low (CAN_L)

Push Button Inside

Prox Reader Outside

Electric Strike

Plug and Play ConnectivityAll devices are capable of connecting utilizing standard Molex connectors. Simply connect all devices and apply power!

6 hi-o.com.au

General Information Designed and manufactured in Australia, the 3570 series electric mortice is a high performance lock of superior quality. It is constructed from high grade zinc alloy, with a stainless steel latch bolt and face plate and is suited for all commercial applications.

The lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers.

Key FeaturesDesigned with flexibility in mind, the one lock can cover all functions and is easily configured on site for the required application.

• Fully monitored

• Fast and accurate Installation with simple plug and play connectors

• Encrypted communication between devices ensures integrity of the opening

• Local monitoring for installation and maintenance

• Self regulating power 12-28Vdc

Monitoring features:• Dead latched and Locked

• Door position/Reed switch

• Dual key override monitoring

• Request to exit/REX

• LED indication

Field changeable settings:• Fail safe/fail secure configuration

• Handing - left hand and right hand doors

• Selection of free lever or locked lever on both sides of the door

• Key override monitoring either side of the door

Standards and Compliance (Security) Australian Lock Standard (AS4145.2.1993) (when used with equivalent security level keying system)

(Durability) Australian Lock Standard (AS4145.2.1993)

Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)

C-Tick Certified

Hour4

S3

D3

Hi-O 3570 Series Electric Mortice Lock

7

Wire Assignments

Pin Color Description

5 Red + 12 - 28Vdc

1 Black 0Vdc

2 White CAN_H

4 Brown CAN_L

H3570 Technical Information

Voltage 12-28Vdc

Current 500mA (max) 80mA holding @ 12Vdc275mA (max) 50mA holding @ 24Vdc

LED Current When LED’s are fitted, add 15mA (max) to total current draw

Monitoring Dual Key overrideDeadlatchedLockedDoor closedRequest to exit

Environment Operational temperature range - 20°c to 60°c

Case/Cover High purity zinc alloy construction

Backset 60mm

Latch bolts Reversible with stainless steel construction

Door Clearance 3 – 6.5 mm

Door thickness Standard applications 32 to 50mm

Cylinder Standard Lockwood oval shaped cylinders

Cabling 2 metre length of cable with pin socket supplied with each lock. Recommended cable: 18AWG (0.82mm²) cable runs up to 30m

Furniture Compatible with Lockwood series door furniture

Standard Finishes Satin Chrome standard. Bright Chrome and Polished Brass finishes achieved via spare face plates and screws

Dimension Backset

A 60 89 127

B 100 129 167

Note: width of case increases from 19mm to 23 mm for 3579 series SCEC lock1915

15

18

175

25

37

64124

30

B

A

4

57

28.5

1.5

28.5

70

54

38

3246

39

1426

68

1.5

28.5

70

54

38

3246

39

1426

6824

18

1915

15

18

175

25

37

64124

30

B

A

4

57

28.5

Reed Magnet

Hi-O 3570 Series Electric Mortice Lock

Ordering Information

Hi-O 3570 Series Electric Mortice Lock 3570ELH0SC

Part NumberProduct Description

Pin 5 - Red(+Vdc)

Pin 1 - Black(0Vdc)

Pin 2 - White(CAN_H)

Pin 4 - Brown(CAN_L)

8 hi-o.com.au

Hi-O 811C Series Motor Lock

General InformationThe 811C series Hook bolt lock is a robust commercial grade lockset ideally suited for both sliding and hinged door applications. Equipped with Hi-O technology, this locks is easy to install and an ideal solution as a secondary device for night locking applications.

Features• Fast and accurate installation with simple plug

and play connectors



• Cylinder or thumb turn provides mechanical override in case of power loss or other emergency override

• 50 or 70mm backset option

• Increased security with hook bolt that interconnects with frame

• Minimum operating time less than 1/3 of a second


• Integrated door reed switch

Applications• Suitable for high security commercial

applications

• All door types – hinged, double and 180 degree swing through door applications

• Suitable for door with automatic door operators

9

Hi-O 811C Series Motor Lock

Hi-O 811C Motor Lock Technical Information

Voltage 12-28Vdc

Current Idle 65mA, Max 200mA @ 24Vdc

Monitoring Door position

Door clearance Maximum gap between lock and strike, 6mm.

Environment Operational temperature range -40°C to +70°C

Backset 50 or 70mm

Latch bolts Bolt Throw 24mm

Cylinder Scandinavian oval or round

Standard Finishes Satin Chrome (SC)


Hi-O Motor Hook Lock 50mm backset 811C-50

Hi-O Motor Hook Lock 70mm backset 811C-70

Euro Adaptor HLM-010 Used to convert from Euro style plug to Molex connector


225

11

105

11

150

22,5

19,5

37,5

1670

100

152

22

2064(84)

50(70)3

Wire Assignments


5 Red + 12 - 28Vdc

1 Black 0Vdc

2 White CAN_H

4 Brown CAN_L

Pin 5 - Red(+Vdc)

Pin 1 - Black(0Vdc)



225

11

105

11

150

22,5

19,5

37,5

1670

100

152

22

2064(84)

50(70)3

10 hi-o.com.au

General DescriptionThe Hi-O enabled ES2000 series electric strikes are fully monitored high security products manufactured from solid stainless steel. The strikes are suitable for use with hinged doors which require either fire or security control as part of a building management system.

These strikes are flexible and can be changed from fail safe to fail secure, mounted on the left or right hand side of the door and have self regulating power from 12-28Vdc.

They offer a strong, dependable and long-lasting electric strike solution with a 850kg holding force and endurance rating of 1 million cycles.

Key Features• Fast and accurate installation with simple plug

and play connectors




• Fully monitored – strike locked and door latched

• Fail safe/fail secure changeable on site

• 4 Hour fire rating

• 850kg holding force

• Cast stainless steel body

• Stainless steel locking pins

• SCEC Endorsed

• Low Current consumption - Max 175ma @12Vdc

• Mounting kit supplied as standard

• Australian designed and made

• ® 5 Year Warranty

Applications• High traffic areas

• Fire rated door sets

• Open in/open out doors

Hi-O ES2000 Series Monitored Electric Strike

Standards and Compliance (Security) Australian Lock Standard (AS4145.2.1993)

(Durability) Australian Lock Standard (AS4145.2.1993)

BS 5872 Approved

Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)

C-Tick Certified

SCEC endorsed for secure areas

S3

D3

Hour4

11

Hi-O ES2000 Series Monitored Electric Strike

ES2000 Technical Information Voltage 12-28Vdc

Current 175 mA @ 12Vdc - 88 mA @ 24Vdc

Solenoids Solenoids are rated for continuous use

Monitoring Solenoid Monitor Door/Latch Monitor

Holding Force 850kg Static Strength Rating

Endurance Cycle tested to 1,000,000 operations

Latch Suitable for 15mm latch tongue with 3 mm door gap

Environment Operational temperature range - 20°C to +60°C

Body Solid Stainless Steel Construction

Keeper Stainless Steel

ES2000 with 25mm Extension Lip ES2000 with 50mm Extension Lip ES2000 with 75mm Extension Lip

12-28Vdc Fail Safe Hi-O Strike 102001-H00

12-28Vdc Fail Secure Hi-O Strike 102002-H00


Product Description Part Number

Product Description

Accessories

13mm Rebate Plate 210100-541

25mm Extension Lip 220200-505

50mm Extension Lip 220200-506

Extension Lip 220200-507

Part Number

122m

m

24.5mm

28.5mm26.5mm17

6mm

122m

m

26.5mm

24.5mm

28.5mm

176m

m

122m

m

26.5mm

24.5mm

28.5mm

176m

m

Wire Assignments


5 Red + 12 - 28Vdc

1 Black 0Vdc

2 White CAN_H

4 Brown CAN_L

Pin 5 - Red(+Vdc)

Pin 1 - Black(0Vdc)



NOTE: Electric strikes are not pre drilled for extension lips. Strikes with extension lip holes available upon application

12 hi-o.com.au

General DescriptionThe PB2 series push button with Hi-O technology is a spring loaded momentary square exit button, with bi-colour illumination and is mounted on a stainless steel single gang outlet box cover.

Key Features• Fast and accurate installation with simple plug

and play connectors




Hi-O HT-PB Series Push Buttons

Hi-O HT-PB Series Push Buttons Technical Information

Voltage 12-28Vdc

Current 20mA @12Vdc

Monitoring Encrypted communication between devices

Connectors Molex

Environment Operational temperature range - 0°C to + 43°C

Standard Finishes Green exit button mounted on stainless steel gang plate


Hi-O push button HT-PBE

Hi-O push button with LED HT-PB2


Wire Assignments


5 Red + 12 - 28Vdc

1 Black 0Vdc

2 White CAN_H

4 Brown CAN_L

Pin 5 - Red(+Vdc)

Pin 1 - Black(0Vdc)



R

13

General DescriptionThe Hi-O TKN50 series push button is a momentary exit button with capacitive touch technology. The exit button will function when a hand is placed within 1cm of the button, making it an ideal selection for sterile environments.

Key Features• Capacitive touch technology – button

operates touch free within 1cm

• Blue LED indication

• Fast and accurate installation with simple plug and play connectors




Hi-O TKN Series Push Buttons

Hi-O TKN Series Push Buttons Technical Information

Voltage 12-28Vdc

Current 50mA @12Vdc

Monitoring Encrypted communication between devices

Connectors Molex

Environment Operational temperature range - 0°C to + 43°C

Standard Finishes White

Material White PC plastic


TKN50 Hi-O Capacitive touch push button TKN50


89.128.9

28.9

67.0

89.1

67.0

9.5

Wire Assignments


5 Red + 12 - 28Vdc

1 Black 0Vdc

2 White CAN_H

4 Brown CAN_L

Pin 5 - Red(+Vdc)

Pin 1 - Black(0Vdc)



89.128.9

28.9

67.0

89.1

67.0

9.5

89.128.9

28.9

67.0

89.1

67.0

9.5

14 hi-o.com.au

General InformationThe Lockwood Swing Door Operator is an electro-hydraulic operator designed for a wide variety of applications. It is suitable for almost all types of external and internal swing doors and has been developed to cope with tough conditions. The operator can be mounted on either side of the door for pull or push action and is suitable for single or double doors fitted with butt hinges or pivots. With remote, push button and motion sensor options, the 8002 provides a full range of electronic door opening solutions.

The 8002 series is a standard operator that requires the Hi-O Kit (8002HK) to operate on Hi-O technology.

Features• Fast and accurate Installation with simple plug

and play connectors




• Opens with motor and closes with spring

• Opening and closing speeds can be varied individually

• Door opening angle adjustable up to 120°

• A range of manual and automatic activation units available

• Impulse and presence detection sensors available

• Non handed

• Push or pull opening solutions

Applications• Disability entrance solutions

• Hospital and health centre applications

• Access controlled locking

• In swinging or out swinging doors

Meets requirements for door weights/widths stated in the:

Controlled door closing, EN 1154 size 3 – 6

Coordination unit for rebated doors, EN 1158

Door closer with opening device (Swing door operator), DIN 18263-4 AU Size 3-6

ANSI/BHMA A156.10, A156.19

UL325/CUL325

SITAC 0710/97

R

8002 Electromechanical Door Operator

15

8002 Technical Information

Electrical 230V AC Mains power, 50 Hz fuse10 A

Door leaf width Maximum door width – 1600mm

Recommended door weight Maximum door weight – 250kg

Door opening angle Maximum opening angle - 120°

Closing Power EN Size 3-6

Environment Operational temperature range: -15°C to + 50°C

Dimensions 110 (H) x 110 (D) x 716 (L) mm

298

Y = Shaft Extension48 068 2098 50118 70

38

A

110

110

80

13M

in. 3

1

110

110

38

4580

13

A

Y

Min

. 25

23

Pull Side Push Side


Swing Door Operator (PULL SIDE) 8002SSIL

Swing Door Operator (PUSH SIDE) 8002PSIL

Hi-O Kit 8002HK

NOTE: each door operator requires 1 x 8002HK to operate with Hi-O technology


8002 Electromechanical Door Operator

Wire Assignments


5 Red + 12 - 28Vdc

1 Black 0Vdc

2 White CAN_H

4 Brown CAN_L

Pin 5 - Red(+Vdc)

Pin 1 - Black(0Vdc)



16 hi-o.com.au

Hi-O HID iCLASS® Readers

iCLASS® smart card readers and cards make access control more powerful, more versatile and most importantly, offer enhanced security through encryption and mutual authentication.

At the same time, iCLASS is user-friendly, delivering the convenience, affordability and reliability of proximity technology, for which HID products are known worldwide.

Using the 13.56 MHz technology platform, the iCLASS read-only contactless smart card readers combine the longer read range of proximity with the heightened security of Hi-O and smartcard technology, making it an ideal solution for all access control applications.

A full range of HID iCLASS proximity readers with Hi-O technology is available.

R15 R30 RK40R10

18 hi-o.com.au

Accessories –Cable and Connectors

3 way connector HLM-003

Reader and push button Dual readers Door operator bus connector Access point to CANBUS (Hi-O Manager) max distance between devices 200mm

Product Description

4 way connector HLM004

Reader, push button and strike Dual readers and strike Access point to CANBUS (Hi-O Manager) max distance between devices 200mm


Mortice lock cable – 2 metres HLM-005

Standard cable supplied with mortice locks Single connector only Second connector terminated on site (supplied with cable)



Frame cable –3.5 metres HLM-006

Cable from door or transfer device to gateway/ DAC or door operators Single connector only Second connector terminated on site (supplied with cable)

Part Number

19


Extended cable – 8 metres HLM-008

Cable from top of door to gateway / EAC DAC Double connector


Euro adaptor – 100mm HLM-010

Adaptor to convert Euro style locks (EL654 and 811C) to Molex connectors

Installer starter kit HK-000

CAN-USB Converter: This is the interface used to connect directly to the Hi-O CANBUS for system configuration through PC based application – Hi-O Manager. All cables and connections supplied

Installation CD The CD contains files to install the Hi-O Manager application on your PC.


Hi-O Technology

Bringing Network Intelligence to the Door

www.hi-o.com.au


Terminal strip adaptor HLM-011

Used when extended cable runs are required or joining multiple Hi-O looms without connectors supplied as a pair.

20 hi-o.com.au

Notes

MS0

823

AAA

-CAT

-077

02

/10

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America.

As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company on the market.

ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2009

Head OfficeASSA ABLOY Australia Pty Limited 235 Huntingdale Road, Oakleigh Victoria, 3166 Australia 1300 LOCK UP (1300 562 587) [email protected]

hi-o technology - assaabloyopeningsolutions.kr · hi-o technology is based on can (controller area...

Documents