Written by Mr. Adam Chally, Feb. 28, 2016.

Page 1 of 14

Here is the basic tutorial where I obtained my information from, but you must be a registered user to access

information.

http://edadocs.software.keysight.com/display/ads201601/Procedure+to+add+a+Vendor+Component+Library

Page 2 of 14

Page 3 of 14

Page 4 of 14

Page 5 of 14

***For 2011-2014 ADS users, the folder you want to navigate to here is called “Agilent” instead of “Keysight”. The rest of the folders are named the same.

***The location of the folder in the above step may differ depending on which folder

the user installed the program into. I selected the default folder during the install.

Page 6 of 14

Page 7 of 14

Page 8 of 14

Page 9 of 14

Page 10 of 14

Page 11 of 14

Page 12 of 14

Page 13 of 14

Page 14 of 14

Right click and select “Place Component”. Then, exit that Component Library window and place your new component in the Schematic/Circuit window. And congratulations, you did it.