hdpe_fittingsapril2012

7/28/2019 HDPE_FittingsApril2012

1/110

Washougal, WA740 South 28th Street Washougal, WA 98671-2597 (360) 835-2129 Fax (360) 835-3521 Toll Free (800) 634-5082

Houston, TX5855 Kelley Street Houston, TX 77026 (713) 491-5000 Fax (713) 633-1097 Toll Free (855) 233-4373 (HDPE)

akeland, FL1995 Lasso LaneLakeland, FL 33801(863) 667-1686Fax (863) 666-5310Toll Free (866) 470-4373 (HDPE)

Centerville, UT1055 West 650 NorthCenterville, UT 84014(801) 295-4373 (HDPE)Fax (801) 294-7020

Tucson, AZ 1215 East Warehouse Avenue Tucson, AZ 85719(520) 792-2022Fax (520) 624-2823 Toll Free (866) 930-4373 (HDPEndianapolis, IN 2702 North Tibbs Avenue Indianapolis, IN 46222(317) 925-0389Fax (317) 925-0755 Toll Free (866) 620-4373 (H

HDPE Piping for All Your Applications

ACCESSORICCESSORIHDPE PIPEDPE PIPE FITTINGSITTINGS

USION EQUIPMENTPMENT SALESALESFABRICATIONABRICATION

RENTALSENTALSwww.hdpe.com


2/110

TABLE OF CONTENTSINFO SHEETSP 3-11PIPE CHARTSP 12-17FLANGE ADAPTERS.P 18-22STUB ENDS.P 23-25FLANGES (HDPE BLINDS & CONVOLUTED)P 26-29MJ ADAPTERS IPS/DIPS P 30-32WALL ANCHOR / WATER STOPP 33-34IPS/DIPS TRANSITIONP 35CAPS.P36-37REDUCERS..P38-42ELBOWS.P43-65TEES.P 66-75CROSSES...P 76-78LATERALSP 79-82ELECTROFUSION COUPLINGS (EF)..P 83-86FM PRICE SHEETS.P 87-108


3/110

FITTING INFORMATION

Machined Fittings:

Machined fittings (i.e.: flange adapters, stub ends, MJ adapters, slip joint anchors,branchsaddles) are normally fully pressure rated to SDR ordered unless otherwise specified.

Machined fittings are normally stocked in most SDR's listed and can be re-machined to alesser wall thickness if needed.

Some fittings may require additional machining charges, please inquire for pricing infor-mation if re-machining is necessary.

Fabricated Fittings:

Fabricated mitered fittings (ie: elbows, line tees, and line crosses with the exception of Wyeswhich are @63%) are generally rated at 80% of the pressure rating of the SDR of material thatis used for the fitting (ie: a mitered fitting produced using SDR-11 160 psi material would bepressure rated for a working pressure of 128 psi).

Fully pressure rated mitered fabricated fittings will be constructed using the next sizeheavier SDR material available (ie: fittings rated for a SDR-11 160 psi working pressure ratingwould be manufactured using SDR-9 material).

Other fabricated fittings such as branch saddle tees, branch saddle wyes, and waterstops arenormally pressure rated to the SDR ordered.

Molded Fittings:

Molded fittings are stocked in most SDR's listed and are normally fully pressure rated.


4/110

HDPE FITTING SUBMITTAL DATA

Customer:Project Name:Service: (Size, service, working pressure, etc)

Ferguson Industrial Plastics fittings are manufactured from pressure rated high density polyethylene pipe

grade feedstock resin made to ASTM F714.

The resin properties are determined by the resin and pipe manufacturers, and can be any one of the

following resins as specified by the customer. Items marked X are the subject of this submittal.

ASTM D3350- Standard Specification for Polyethylene Plastic Pipe & Fittings Material

Cell Classification 234373E (Yellow, Medium Density PE 2406/2407) Bi-modalCell Classification 234373E (Yellow, Medium Density PE 2406/2407) Uni-modal

Cell Classification 345464C (Black, High Density PE 3408/3608)

Cell Classification 445576C (Black PE 4710 Bi-modal)

Cell Classification 445574C (Black PE 4710 Uni-modal)

The dimensional characteristics and pressure capabilities of Ferguson Industrial Plastics molded and

fabricated fittings are established in accordance with the following standards, and as specified by the customer.

Additional dimensional data may accompany this submittal. Items marked X are the subject of this submittal.

ASTM D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing And Fittings

ASTM F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,Fittings, Sheet Stock, Plate Stock, or Block Stock.ASTM D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings forPolyethylene (PE) Plastic Pipe and Tubing

ASTM D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-

Controlled Polyethylene Pipe and TubingAWWA C906-07 DIPS Polyethylene (PE) Pressure Pipe and Fittings, 2in through 63in For Water Distribution Fittings specified to be AWWA approved meet this specification. Customer waives AWWA hydro-testingrequirement over 24 unless specifically noted on purchase order.AWWA C906-07 IPS Polyethylene (PE) Pressure Pipe and Fittings, 2in through 63in For Water Distribution Fittings specified to be AWWA approved meet this specification. Customer waives AWWA hydro-testingrequirement over 24 unless specifically noted on purchase order.

NSF-61 Drinking Water System Components Health EffectsFactory Mutual Class 200 Factory Mutual, Class number 1613, Polyethylene (PE) Pipe and Fittings forUnderground Fire ProtectionFactory Mutual Class 150 Factory Mutual, Class number 1613, Polyethylene (PE) Pipe and Fittings forUnderground Fire Protection

Other

All fabrication procedures will be carried out according to the FIP QA/QC manual including routine in-plantinspections, quality control, sampling, and long term testing which meets or exceeds the customer specifications orstandards listed above. The FIP QA/QC manual is available for customer inspection upon request.

Visit our website: www.HDPE.com
http://../Local%20Settings/Local%20Settings/Local%20Settings/Temporary%20Internet%20Files/OLKF4/www.HDPE.comhttp://../Local%20Settings/Local%20Settings/Local%20Settings/Temporary%20Internet%20Files/OLKF4/www.HDPE.com


5/110

Order and Price Information

Pricing:

All pricing will be issued FOB. FIP Location unless noted otherwise,. Freight pricing estimates can be

provided upon request.

All prices are based on normal manufacturing lead times at normal costs. Rush manufacturing andrush shipments may be subject to a service or expediting charge.

All pricing and designs are subject to change without notice.

All orders are subject to Ferguson Industrial Plastics, acceptance and our current conditions of sale..

Ordering:

Freight Charges: Freight will be prepaid and added to the invoice unless otherwise specified.

Order Placement: Orders are taken by our Customer Service Department via phone, facsimile and/or

e-mail and will require a purchase order number.

Availability of Product:

Ferguson Industrial Pipe, has a large inventory of HDPE pipe, fittings and accessories.,

Availability of the products listed in this catalog will always be subject to the availability of raw material.Large quantities of raw material are kept on hand to provide timely deliveries.


6/110

RETURN POLICY

All returns must be approved by Ferguson Industrial Plastics, prior to return.

1. Standard Stock Items:

A. 15% restocking fee will be charged on the return of standard stock items.

B. Material must be in resalable condition

C. Customer is responsible for freight charges incurred on returned materials.

2. Non-stock or Custom Ordered Material.

A. Most non-stock and custom ordered items are noncancelable/non returnable once material is ordered and orproduction has begun.


7/110

v:3/30/2007 5:40 PM C:\Documents and Settings\AAE4418\Desktop\Price Book\New PDF Price sht 12 15 10\3F Industrial Plastics Division Warranty v03 doc

LIMITEDWARRANTY

. WARRANTY: Subject to the limitations expressed herein, Seller warrants that products manufactured by Seller shall be

free from defects in design, material and workmanship for a period of one (1) year from installation but in no case shallthe warranty period extend longer than eighteen (18) months from the date of sale ("Warranty Period"). This warranty isvoid for any damage caused by (a) improper storage or installation (b) accident, damage, abuse or misuse, (c) abnorma

or unusual operating conditions or applications (d) operating conditions or applications not made known to Seller prior to

the date of the sale of the products (e) operating conditions or applications above the rated capacity of the product (f) apurpose or application in any way different from that for which the product was designed or (g) failure to comply with theterms of this warranty agreement.

. REMEDIES. Seller shall repair or replace, at its option and at no additional charge, any non-conforming or otherwise

defective product, upon receipt of notice from Buyer during the Warranty Period of the alleged material defect. Selle

makes NO ADDITIONAL ALLOWANCE FOR THE LABOR OR EXPENSE OF REPAIRING OR REPLACING DEFECTIVEPRODUCTS OR WORKMANSHIP OR DAMAGE RESULTING FROM SAME. SELLER HEREBY DISCLAIMS ALL OTHEREXPRESSED OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS OR FITNESS FOR A PARTICULAR PURPOSE.

. BUYER RESPONSIBILITIES. Every claim under this warranty shall be deemed waived unless Buyer submits to Seller a

detailed description of the alleged defect and the manner in which Seller's workmanship is believed to be materiallydefective. Such description must be submitted in writing within sixty (60) days of the date Buyer knew or reasonablyshould have known of the alleged material defect and within the Warranty Period.

. LIMITATION OF LIABILITY. The warranty provided above is strictly limited to its terms and is in lieu of all otherwarranties expressed, implied and statutory. Buyer specifically understands and agrees that Seller shall not be liable in

tort to Buyer, whether based on negligence, strict liability, or any other theory of tort liability for any action or failure toact in respect to the manufacture, preparation for sale, sale, delivery or use of Seller's products. Buyer expressly agreesthat his sole and exclusive remedy for breach of the warranty set forth above shall be the remedies set forth above.BUYER FURTHER SPECIFICALLY UNDERSTANDS AND AGREES THAT, EXCEPT AS PROVIDED NO REMEDY SHALL BE

AVAILABLE TO BUYER, INCLUDING, BUT NOT LIMITED TO, CLAIMS FOR INCIDENTAL, PUNITIVE, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND. UNDER NO CIRCUMSTANCES WILL SELLER BE LIABILE FOR LOSS OF

ANTICIPATED PROFITS OR ANY OTHER LOSS CAUSED BY REASON OF NONOPERATION OR INCREASED EXPENSE OF

OPERATION CAUSED BY SELLER'S PRODUCTS. BUYER HEREBY ACKNOWLEDGES AND AGREES THAT UNDER NOCIRCUMSTANCES, AND IN NO EVENT, SHALL SELLER'S LIABILITY, IF ANY, EXCEED THE NET SALES PRICE OF THEDEFECTIVE PRODUCT(S) PURCHASED DURING THE PREVIOUS CONTRACT YEAR.

. RECOMMENDATIONS BY SELLER. Seller may assist Buyer in selection decisions by providing information regarding

products that it manufacturers and those manufactured by others. However, Buyer acknowledges that Buyer ultimatelychooses the product's suitability for its particular use, as normally signified by the signature of Buyer's technicarepresentative. Any recommendation made by Seller concerning the use, design, application or operation of the productsshall not be construed as representations or warranties, expressed or implied. Failure by Seller to make

recommendations or give advice to Buyer shall not impose any liability upon Seller.

. EXCUSED PERFORMANCE. Seller will make a good faith effort to complete delivery of the products as indicated bySeller in writing, but Seller assumes no responsibility or liability and will accept no backcharge or loss or damage due todelay or inability to deliver, caused by acts of God, war, labor difficulties, accidents, inability to obtain materials, delays ofcarriers, contractors or suppliers or any other causes of any kind whatever beyond the control of Seller. Under nocircumstances shall Seller be liable for any special, consequential, incidental, or direct damages, losses, or expenses(whether or not based on negligence) arising directly or indirectly from delays or failure to give notice of delay.

. CONTROLLING PROVISIONS. All terms and conditions contained in any prior oral or written communicationincluding, without limitation, Buyer's purchase order, which are different from or in addition to the terms and conditionsherein are hereby rejected and shall not be binding on Seller, whether or not they would materially alter this documentand Seller herby objects thereto. Buyer agrees that all sales are subject to Seller's Terms and Conditions (Terms) which

are available upon request or can be viewed on the web at www.ferguson.com/sales-terms.html. Buyer will be deemedto have assented to Terms if any part of the goods and/or services are delivered.


8/110

CORPORATE BUSINESS MANAGER:Joe Morgan ~757-876-0969 cell

GENERAL MANAGER:Ron Hartman ~863-559-6113 cell

NATIONAL SALES MANAGER:Dave Schlegel ~360-518-8480 cell

REGIONAL SALEMEN:

REGION NAMEREGIONAL

SALESMEN

CELL

PHONE

NORTHWEST Gary Burback 206-786-0707

SOCAL Mike Nichols 805-450-3399

MOUNTAIN J ack Cole 801-682-6123

MIDWEST J oe Paul 937-509-0241

NORTHEAST Lawrence Norris 978-434-1287

SOUTHEAST Clayton Yawn 912-659-1324

SOUTH CENTRAL Chris Lofton 281-917-9935

FLORIDA Keith Fuqua 863-559-9264

SOUTHWEST Mark Kastl 602-396-8410 Arizona and New Mexico

Ferguson Industrial PlasticsContact Information

ND, SD, NE, CO,Eastern MT, WY,

NV, UT,

MN, IA, MO WI, IL, MI, IN, KY,

OH, WV, Nashville and NW Tn

ME, VT, NH, CT, MA, RI, NY, NJ ,

PA, DE, MD, Northern AND

Western VA.

Southeastern VA, NC, Eastern and

Southern TN, MS, AL, GA, SC,

PR

FLORIDA

TX, KS, OK, AR, LA

STATES COVERED IN

REGION

AK, ID, WA, OR, Western MT

CA, HI,

FIP Contact Info

1


9/110

Name Position Direct Line Cell Phone Fax

Bancke, Chad

INSIDE SALES/

Washougal,Wa (360)-835-4013 N/A (360)-835-3521

Lien, William(Denny)

INSIDE SALES/

Washougal,Wa (360)-835-4009 N/A (360)-835-3521

Schreiner, Tyson

SALES MANAGER/

Washougal,Wa (360)-835-4011 (360) 518-1240 (360)-835-3521

Taylor, Mike

INSIDE SALES/

Washougal,Wa (360)-835-4008 N/A (360)-835-3521

Donnelly, J oe

Rental

Equip\Washougal, Wa (360)-835-4050 (360) 518-1890 (360)-835-5937

Name Position Phone Cell Phone Fax

Ward, Richard

INSIDE

SALES/Lakeland Fla (863) 614-9328 (863) 860-2172 (863) 666-5310

INSIDE

SALES/Lakeland Fla n/a

Culverhouse, Michael

FUSION MANAGER

Rental Equipment

Lakeland Fla (863) 614-9325 (863) 581-6611 (863) 666-5310


Cole, Justin

INSIDE

SALES/Centerville,

UT 801-295-4373 N/A (801) 294-7020

MANAGER ~Shawn Rupe ~801-430-6906 cell

CENTERVILLE, UT FACILITY ~801-295-HDPE (4373)

MANAGER ~J oshua Stripling ~863-272-5903 cell

WASHOUGAL, WA FACILITY ~800-634-5082MANAGER ~ Jim Schlegel ~ 360-798-0219 cell

LAKELAND, FL FACILITY ~866-470-HDPE (4373)

FIP Contact Info

2


10/110


Post, Scott

INSIDE

SALES/TUSCON 866-930-4373 520-954-2908 (520) 624-2823

Trevino, Yvonne Rental Contact 866-930-4370 N/A (520) 624-2823


Kenworthy, J eff Inside Sales 866-620-4373 N/A 317-925-0755

Kloibhofer, J ason Inside Sales 866-620-4373 N/A 317-925-0755


Bragantini, Rafael Inside Sales 855-233-4373 N/A (713)-633-1097

Cromartie, Philip Inside Sales 855-233-4373 N/A (713)-633-1097

Name Position Phone Cell Phone FaxPiotrowski, Christine Inside Sales 866-549-6115 N/A (262)-628-1907

Manager ~ Tim Brizzolara ~ 317-448-8910 Cell

INDIANAPOLIS, IN FACILITY ~866-620-HDPE (4373)MANAGER ~Allen Stratton ~317-654-4452 cell

HOUSTON, TX FACILITY ~855-233-HDPE (4373)MANAGER ~Don Branch ~832-262-2779 cell

TUCSON, AZ FACILITY ~866-930-HDPE (4373)

MANAGER ~Sand Zaspel ~520-954-5848 cell Fax

LANDFILL

FIP Contact Info

3


11/110

HDPE REGIONAL MAP

K

MO

Centerville

Tucson

Houston

In

AK

Washougal

WA

OR

ID

MT

SD

ND

MN

WS

MI

INIL

IA

NE

WY

UTNVCA

AZ

NM

OK

KS

CO

HI

TXLA

MS

AK

AL

TN


12/110

IPS Size and Dimension Data

Pressure Ratings are calculated using 0.63 design factor for HDS at 73F as listed in PPI TR-4 for PE 4710 materials.

Temperature, Chemical, and Environmental use considerations may require use of additional design factors.

IPS Pipe

Size

Nominal

OD (in)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

1 1/4" 1.660 0.227 1.179 0.45 0.184 1.270 0.37 0.151 1.340 0.31

1 1/2" 1.900 0.260 1.349 0.59 0.211 1.453 0.49 0.173 1.533 0.41

2" 2.375 0.325 1.686 0.91 0.264 1.815 0.77 0.216 1.917 0.64

3" 3.500 0.479 2.485 1.99 0.389 2.675 1.66 0.318 2.826 1.39

4" 4.500 0.616 3.194 3.28 0.500 3.440 2.75 0.409 3.633 2.31

6" 6.625 0.908 4.700 7.13 0.736 5.065 5.96 0.602 5.349 5.00

8" 8.625 1.182 6.119 12.08 0.958 6.594 10.10 0.784 6.963 8.4710" 10.750 1.473 7.627 18.76 1.194 8.219 15.69 0.977 8.679 13.15

12" 12.750 1.747 9.046 26.39 1.417 9.746 22.09 1.159 10.293 18.51

14" 14.000 1.918 9.934 31.81 1.556 10.701 26.63 1.273 11.301 22.32

16" 16.000 2.192 11.353 41.55 1.778 12.231 34.78 1.455 12.915 29.15

18" 18.000 2.466 12.772 52.58 2.000 13.760 44.02 1.636 14.532 36.88

20" 20.000 2.740 14.191 64.92 2.222 15.289 54.34 1.818 16.146 45.54

22" 22.000 3.014 15.610 78.55 2.444 16.819 65.74 2.000 17.760 55.10

24" 24.000 3.288 17.029 93.48 2.667 18.346 78.26 2.182 19.374 65.58

26" 26.000 2.889 19.875 91.84 2.364 20.988 76.97

28" 28.000 3.111 21.405 106.51 2.545 22.605 89.25

30" 30.000 3.333 22.934 122.26 2.727 24.219 102.46

32" 32.000 2.909 25.833 116.58

34" 34.000 3.091 27.447 131.62

36" 36.000 3.273 29.061 147.5642" 42.000

48" 48.000

54" 54.000

200 psi

Rating DR 7.3 DR 9.0 DR 11.0

255 psi

Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using nomnal OD and Minimum wall plus

vary. When designing components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specifica

Pressure 320 psi


13/110


Pressure Ratings are calculated using 0.63 design factor for HDS at 73F as listed in PPI TR-4 for PE 4710 materials.

Temperature, Chemical, and Environmental use considerations may require use of additional design factors.

IPS Pipe

Size

Nominal

OD (in)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

1 1/4" 1.660

1 1/2" 1.900

2" 2.375 0.140 2.078 0.43

3" 3.500 0.206 3.063 0.94

4" 4.500 0.265 3.938 1.55 0.214 4.046 1.27

6" 6.625 0.390 5.798 3.36 0.315 5.957 2.75 0.255 6.084 2.25

8" 8.625 0.507 7.550 5.68 0.411 7.754 4.66 0.332 7.921 3.81

10" 10.750 0.632 9.410 8.83 0.512 9.665 7.24 0.413 9.874 5.90 12" 12.750 0.750 11.160 12.43 0.607 11.463 10.18 0.490 11.711 8.31

14" 14.000 0.824 12.253 14.99 0.667 12.586 12.29 0.538 12.859 10.01

16" 16.000 0.941 14.005 19.57 0.762 14.385 16.04 0.615 14.696 13.08

18" 18.000 1.059 15.755 24.77 0.857 16.183 20.30 0.692 16.533 16.56

20" 20.000 1.176 17.507 30.57 0.952 17.982 25.06 0.769 18.370 20.45

22" 22.000 1.294 19.257 36.99 1.048 19.778 30.34 0.846 20.206 24.74

24" 24.000 1.412 21.007 44.04 1.143 21.577 36.10 0.923 22.043 29.45

26" 26.000 1.529 22.759 51.66 1.238 23.375 42.36 1.000 23.880 34.57

28" 28.000 1.647 24.508 59.93 1.333 25.174 49.12 1.077 25.717 40.09

30" 30.000 1.765 26.258 68.81 1.429 26.971 56.41 1.154 27.554 46.02

32" 32.000 1.882 28.010 78.26 1.524 28.769 64.18 1.231 29.390 52.37

34" 34.000 2.000 29.760 88.37 1.619 30.568 72.44 1.308 31.227 59.12

36" 36.000 2.118 31.510 99.08 1.714 32.366 81.20 1.385 33.064 66.28

42" 42.000 2.471 36.761 134.86 2.000 37.760 110.54 1.615 38.576 90.18 48" 48.000 2.824 42.013 176.15 2.286 43.154 144.40 1.846 44.086 117.80

54" 54.000 2.571 48.549 182.70 2.077 49.597 149.11

80 psi

DR 21.0 DR 26.0

Pressure 130 psi


vary. When designing components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specifica

100 psi

Rating DR 17.0


14/110


Pressure Ratings are calculated using 0.50 design factor for HDS at 73F as listed in PPI TR-4 for PE 3608 materials. Temperature, Chemical, and Environmental use considerations may require use of additional design factors.

IPS Pipe

Size

Nominal

OD (in)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

1 1/4" 1.660 0.227 1.179 0.44 0.184 1.270 0.37 0.151 1.340 0.31

1 1/2" 1.900 0.260 1.349 0.58 0.211 1.453 0.49 0.173 1.533 0.41

2" 2.375 0.325 1.686 0.91 0.264 1.815 0.76 0.216 1.917 0.64

3" 3.500 0.479 2.485 1.98 0.389 2.675 1.66 0.318 2.826 1.39

4" 4.500 0.616 3.194 3.27 0.500 3.440 2.74 0.409 3.633 2.29

6" 6.625 0.908 4.700 7.09 0.736 5.065 5.93 0.602 5.349 4.97

8" 8.625 1.182 6.119 12.01 0.958 6.594 10.05 0.784 6.963 8.42 10" 10.750 1.473 7.627 18.66 1.194 8.219 15.61 0.977 8.679 13.09

12" 12.750 1.747 9.046 26.25 1.417 9.746 21.97 1.159 10.293 18.41

14" 14.000 1.918 9.934 31.64 1.556 10.701 26.50 1.273 11.301 22.20

16" 16.000 2.192 11.353 41.33 1.778 12.231 34.60 1.455 12.915 29.00

18" 18.000 2.466 12.772 52.31 2.000 13.760 43.79 1.636 14.532 36.69

20" 20.000 2.740 14.191 64.58 2.222 15.289 54.05 1.818 16.146 45.30

22" 22.000 3.014 15.610 78.14 2.444 16.819 65.40 2.000 17.760 54.82

24" 24.000 3.288 17.029 93.00 2.667 18.346 77.85 2.182 19.374 65.24

26" 26.000 2.889 19.875 91.36 2.364 20.988 76.57

28" 28.000 3.111 21.405 105.95 2.545 22.605 88.78

30" 30.000 3.333 22.934 121.62 2.727 24.219 101.92

32" 32.000 2.909 25.833 115.97

34" 34.000 3.091 27.447 130.93

36" 36.000 3.273 29.061 146.80 42" 42.000

48" 48.000

54" 54.000

200 psi


will vary. When designing components to fit the pipe ID, refer to pipe dimensions and tolerances in the applicable pipe manufacturing spe

Pressure 255 psi 160 psi



15/110


Pressure Ratings are calculated using 0.50 design factor for HDS at 73F as listed in PPI TR-4 for PE 3608 materials.Temperature, Chemical, and Environmental use considerations may require use of additional design factors.

IPS Pipe

Size

Nominal

OD (in)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

Minimum

Wall (in)

Average ID

(in)

Weight

(lbs/ft)

1 1/4" 1.660

1 1/2" 1.900

2" 2.375 0.140 2.078 0.43

3" 3.500 0.206 3.063 0.93

4" 4.500 0.265 3.938 1.54 0.214 4.046 1.26

6" 6.625 0.390 5.798 3.34 0.315 5.957 2.73 0.255 6.084 2.23

8" 8.625 0.507 7.550 5.65 0.411 7.754 4.64 0.332 7.921 3.79

10" 10.750 0.632 9.410 8.78 0.512 9.665 7.21 0.413 9.874 5.87

12" 12.750 0.750 11.160 12.36 0.607 11.463 10.13 0.490 11.711 8.26 14" 14.000 0.824 12.253 14.91 0.667 12.586 12.22 0.538 12.859 9.96

16" 16.000 0.941 14.005 19.46 0.762 14.385 15.96 0.615 14.696 13.01

18" 18.000 1.059 15.755 24.64 0.857 16.183 20.19 0.692 16.533 16.47

20" 20.000 1.176 17.507 30.41 0.952 17.982 24.93 0.769 18.370 20.34

22" 22.000 1.294 19.257 36.80 1.048 19.778 30.18 0.846 20.206 24.61

24" 24.000 1.412 21.007 43.81 1.143 21.577 35.91 0.923 22.043 29.30

26" 26.000 1.529 22.759 51.39 1.238 23.375 42.14 1.000 23.880 34.39

28" 28.000 1.647 24.508 59.62 1.333 25.174 48.86 1.077 25.717 39.88

30" 30.000 1.765 26.258 68.45 1.429 26.971 56.12 1.154 27.554 45.78

32" 32.000 1.882 28.010 77.86 1.524 28.769 63.84 1.231 29.390 52.10

34" 34.000 2.000 29.760 87.91 1.619 30.568 72.06 1.308 31.227 58.81

36" 36.000 2.118 31.510 98.57 1.714 32.366 80.78 1.385 33.064 65.94

42" 42.000 2.471 36.761 134.16 2.000 37.760 109.97 1.615 38.576 89.71

48" 48.000 2.824 42.013 175.23 2.286 43.154 143.65 1.846 44.086 117.18 54" 54.000 2.571 48.549 181.75 2.077 49.597 148.33

a

80 psi


Pressure 100 psi 65 psi


16/110


17/110


18/110

160 DR 11 0.10 PEI11ABFF200 DR 9 0.10 PEI9ABFF

267 DR 7 0.10 PEI7ABFF

160 DR 11 0.20 PEI11ABFG

200 DR 9 0.20 PEI9ABFG

267 DR 7 0.20 PEI7ABFG

160 DR 11 0.30 A112012511

200 DR 9 0.30 PEI9ABFH

267 DR 7 0.30 PEI7ABFH

160 DR 11 0.35 PEI11ABFJ

200 DR 9 0.35 PEI9ABFJ

267 DR 7 0.40 PEI7ABFJ

160 DR 11 0.33 PEI11ABFK

200 DR 9 0.40 PEI9ABFK

267 DR 7 0.47 PEI7ABFK

160 DR 11 0.75 PEI11ABFL

200 DR 9 0.75 PEI9ABFL

267 DR 7 0.80 PEI7ABFL

100 DR 17 0.83 PEI17ABFM

160 DR 11 0.83 PEI11ABFM

200 DR 9 1.20 PEI9ABFM

267 DR 7 1.25 PEI7ABFM

100 DR 17 1.70 PEI17ABFP

160 DR 11 1.70 PEI11ABFP

200 DR 9 2.10 PEI9ABFP

267 DR 7 2.30 PEI7ABFP

100 DR 17 2.50 PEI17ABFS

160 DR 11 2.50 PEI11ABFS

200 DR 9 2.50 PEI9ABFS100 DR 17 5 PEI17ABFU

160 DR 11 6 PEI11ABFU

200 DR 9 7 PEI9ABFU

267 DR 7 7 PEI7ABFU

100 Dr 17 6 PEI17ABFX

160 DR 11 6 PEI11ABFX

200 DR 9 7 PEI9ABFX

267 DR 7 11 PEI7ABFX

IPS FLANGEADAPTER

Nominal SizeActual OD

Pressure

Class (psi)SDR

Dimensions

AxTxC(in)

CFP = CALL FOR PRICING

Weight Per

Item(lbs)Part #

IPS

3/4"1.050"

4.00 X 0.39 X 1.85

IPS

1"1.315"

4.00 X 0.39 X 2.36

IPS

1-1/4"1.660"

4.00 X 0.39 X 2.80

IPS

1-1/2"1.660"

4.00 X .39 X 3.15

IPS

2"2.375

6.00 X 0.40 X 4.00

IPS

*2-1/2"2.875"

6.00 X .60 X 5.00

IPS

3"3.50"

6.00 X .60 X 5.00

IPS

4"4.50"

6.00 X .80 X 6.60

6.00 X .80 X 6.00

IPS

5"

5.563"IPS

6"6.625

8.00 X .64 X 7.50

8.00 X .98 X 7.50

8.00 X .80 X 8.50

8.13 X 1.10 X 8.13

IPS

8"8.625

9.00 X .80 X 10.60

8.63 X 1.40 X 10.75


19/110

IPS FLANGEADAPTER


Pressure

Class (psi)SDR

Dimensions

AxTxC(in)


Weight Per

Item(lbs)Part #

100 DR 17 10 PEI17ABF10160 DR 11 10 PEI11ABF10

200 DR 9 17 PEI9ABF10

267 DR 7 25 PEI7ABF10

100 DR 17 18 PEI17ABF12

160 DR 11 18 PEI11ABF12

200 DR 9 26 PEI9ABF12

267 DR 7 29 PEI7ABF12

100 DR 17 28 PEI17ABF14

160 DR 11 28 PEI11ABF14

200 DR 9 28 PEI9ABF14

267 DR 7 41 PEI7ABF14

100 DR 17 37 PEI17ABF16

160 DR 11 37 PEI11ABF16

200 DR 9 37 PEI9ABF16

267 DR 7 53 PEI7ABF16

100 DR 17 44 PEI17ABF18

160 DR 11 44 PEI11ABF18

200 DR 9 44 PEI9ABF18

267 DR 7 64 PEI7ABF18

100 DR 17 56 PEI17ABF20

160 DR 11 56 PEI11ABF20

200 DR 9 56 PEI9ABF20

267 DR 7 62 PEI7ABF20

100 DR 17 68 PEI17ABF22

160 DR 11 68 PEI11ABF22

200 DR 9 68 PEI9ABF22

100 DR 17 83 PEI17ABF24

160 DR 11 83 PEI11ABF24

200 DR 9 83 PEI9ABF24

100 DR 17 87 PEI17ABF26

160 DR 11 117 PEI11ABF26

50-100DR

32.5-1790 PEIPS17BFA28

160 DR 11 129 PEI11ABF28

IPS10"10.75

9.00 X .90 X 12.80

9.00 X 1.30 X 12.80

8.75 X 1.70 X 12.75

IPS

12"12.75"

IPS

14"14.00"

10.8 X 1.00 X 15.00

10.80 X 1.50 X 15.00

9.13 X 2.10 X 15.50

11.00 X 1.10 X 17.50

11.00 X 1.70 X 17.50

12.00 X 2.35 X 17.00

IPS

16"16.00"

IPS

18"18.00"

12.00 X 1.20 X 20.00

12.00 X 1.90 X 20.00

12.00 X 2.60 X 19.50

12.00 X 1.40 X 21.1012.00 X 2.10 X 21.10

12.00 X 3.00 X 21.13

IPS

20"20.00"

IPS

22"

22.00"

12.00 X 1.50 X 23.50

12.00 X 2.30 X 23.50

CALL

12.00 X 1.60 X 25.60

12.00 X 2.50 X 25.60

CALL

IPS

24"

24.00"

CALL

CALL

IPS

26"

26.00"

14.00 X 1.80 X 27.90

14.00 X 2.90 X 27.90

CALL

IPS

28"

28.00"

CALL

CALL


20/110

IPS FLANGEADAPTER


Pressure

Class (psi)SDR

Dimensions

AxTxC(in)


Weight Per

Item(lbs)Part #

50-100DR

32.5-17 98 PEI17HBF30

160 DR 11 134 PEI11ABF30

50 DR 32.5 95 PEI32ABF32

100 DR 17 106 PEI17HBF32

50 DR 32.5 120 PEI32ABF34

100 DR 17 135 PEI17ABF34

50 DR 32.5 130 PEI32HBF36

50-100DR

32.5-17141 PEI17HBF36

50-100DR

32.5-21152

PEI26HBF42

PEI32HBF42

50 DR 32.5 150 PEI32ABF48

65 DR 26 170 PEI26ABF48

50 DR 32.5 230 PEI26ABF54

65 DR 26 PEI32ABF54

IPS30"

30.00"

CALL

CALL

IPS

34"

34.00"

CALL

IPS

32"

32.00"

CALL

IPS

42"

42.00"

CALL

IPS

36"

36.00"

CALL

CALLIPS

54"

54.00"

IPS

48"

48.00"

CALL

CALL


21/110

17 100 PEI17HBFBEVP11 160 PEI11HBFBEVP17 100 PEI17HBFBEVU11 160 PEI11HBFBEVU17 100 PEI17HBFBEVX11 160 PEI11HBFBEVX17 100 PEI17HBFBEV1011 160 PEI11HBFBEV1017 100 PEI17HBFBEV1211 160 PEI11HBFBEV12

The above requirement insures proper valve operation prior to burial and also will identify unexpected

situations including valve design changes or valve substitutions at the project.

12.75X9.5 2.00

Prior to ordering Specific valve information including

manufacturer,model number, disc diameter, and center to face dims

of valve is required

SDR

Larger sizes available upon request

Butterfly valve flange adapters should always be tested to fit to the actual valve and then field tested for valve disk clearance and full rotation

prior to butt fusion of the flange to the pipeline. After butt fusion and bolt up of flange repeat this trial at each occurrence to insure final install

is properly centered, thus again allowing valve disk clearance and full rotation.

1.25

61.50

12"

12.750"19

10"

10.750"12

15X11.50 2.25

8"

8.625"810.75X9.5 1.75

6"

6.625"8.625X8.50

IPS BEVELED BFV FLANGEADAPTER


Pressure

Class

(psi)

Dimensions

BxL(in)

Dimension

T (in)Part #

4"

4.5000"56.625X6.50

Weight

(lbs)


22/110

160 PED11ABFP

200 PED9ABFP

160 PED11ABFU

200 PED9ABFU

160 PED11ABFX

200 PED9ABFX

160 PED11ABF10

200 PED9ABF10

160 PED11ABF12

200 PED9ABF12

160 PED11ABF14

200 PED9ABF14

160 PED11ABF16

200 PED9ABF16

160 PED11ABF18

200 PED9ABF18

160 PED11ABF20

200 PED9ABF20

160 PED11ABF24

200PED9ABF24

160

30"32.000" 34.30 X 14 3.64 114

24"

25.80" 27 5/8 x 122.6

83

4.10

20"21.600"

23 1/4 x122.200

56

3.40

18"19.500" 21 X 12

2.044.0

3.10

200

16"17.400"

19 5/8 x 12

1

37.0

2.46

14"15.300" 17 1/8 x 12

1.58

28

2.13 26

12"13.200"

15 1/2 x 11

1.37

1.80 17

10"11.100"

12 3/4 x 9

1.16

1.47 11

8"

9.050"10 3/8 x 9

0.96

1.14 6

6"6.900"

8 3/16 x 80.740 4

6 5/16 x 6

.

2.0

0.80

PED11ABF30

DIPS FLANGEADAPTER


Dr/Pressure

Class (psi)

Dimensions

BxC(in)

Dimension

T (in)Package(lbs Part #

4"

4.80"


23/110

100 PEI17HBSE14F

160 PEI11HBSE14F

200 PEI9HBSE14F

267 PEI7HBSE14F

100 PEI17HBSE16F

160 PEI11HBSE16F

200 PEI9HBSE16F

267 PEI7HBSE16F

PEI32HBSE18F

65 PEI26HBSE18F

80 PEI21HBSE18F

100 PEI17HBSE18F160 PEI11HBSE18F

200 PEI9HBSE18F

267 PEI7HBSE18F

100 PEI17HBSE20F

160 PEI11HBSE20F

200 PEI9HBSE20F

267 PEI7HBSE20F

100 PEI17HBSE22F

160 PEI11HBSE22F

200 PEI9HBSE22F

267 PEI7HBSE22F

100 PEI17HBSE24F

160 PEI11HBSE24F

200 PEI9HBSE24F

267PEI7HBSE24F

100 PEI17HBSE26F

128

160 PEI11HBSE26F


IPS STUB END


Pressure

Class (psi)

Dimensions

BxC(in)

Dimension

T (in)Part #

14"14.000"

17 x 5

1.45 13

2.26 23

1.66 16

Weight per

Package(lbs

2.58 30

18"

18.000" 20 1/8 x 5

1.90 20

2.90 32

16"16.000"

19 1/2 x 5

20"20.000"

23 5/16 x 5

2.10 29

22"22.000"

25 1/4 x 5

2.30 36

3.50

39

2.50 38

3.20 33

3.80 45

26"26.000"

30.00 X 4.00

1.91 28

2.95 36

24"24.000"

27 11/16 x 5


24/110


IPS STUB END


Pressure

Class (psi)

Dimensions

BxC(in)

Dimension

T (in)Part #

Weight per

Package(lbs

50

65 PEI26HBSE28F

100 PEI17HBSE28F

160 PEI11HBSE28F

65 PEI26HBSE30F

100 PEI17HBSE30F

128 PEI11HBSE30F

65 PEI26HBSE32F

80 PEI21HBSE32F

100 PEI17HBSE32F

65 PEI26HBSE34F

80 PEI21HBSE34F

100 PEI17HBSE34F

50 PEI32HBSE36F

65 PEI26HBSE36F

100PEI17HBSE36F

65 PEI26HBSE42F

100

PEI17HBSE42F50 PEI32HBSE48F

65

PEI26HBSE48F

50 PEI32HBSE54F

65PEI26HBSE54F

28"28.000"

32.30 X 4.00 2.21 34

32.30 X 4.80 3.18 44

34.30 X 5.00 3.41 53

30"30.000"

34.30 X 4.00 2.21 42

32"32.000"

36.50 X 4.00 2.35 51

34"34.000"

38.50 X 4.00 2.5 59

36"36.000"

40.80 X 4.00 2.65 67

42"42.000"

47.50 X 4.50 3.09 82

48"48.000"

54.00 X 4.50 2.60 87

54"54.000"

60.00 X 4.50 2.60 152


25/110

Pressure

Class

(psi)

Part #

128 PED17HBSE10F

160 PED11HBSE10F

200 PED9HBSE10F

128 PED17HBSE12F

160 PED11HBSE12F

200 PED9HBSE12F

128 PED17HBSE14F

160 PED11HBSE14F

200 PED9HBSE14F

128 PED17HBSE16F

160 PED11HBSE16F

200 PED9HBSE16F

128 PED17HBSE18F

160 PED11HBSE18F

200 PED9HBSE18F

128 PED17HBSE20F

160 PED11HBSE20F

200 PED9HBSE20F

128 PED17HBSE24F

160 PED11HBSE24F

200 PED9HBSE24F

128 PED17HBSE30F

160PED11HBSE30F

CFP= CALL FOR PRICING

16"17.400"

18"19.50000"

21 x 52

3.64 110

4.1 45

24"25.800" 27 5/8 X 5

2.6 35

30"

32.00" 34.30 X 5

20"21.600" 23 1/4 x 5

2.229

3.4 33

19 5/8 x 4

2.1

2.8 30

29

2.13

3.1 32

20

11

14"15.300" 17 1/8 x 4

1.9

20

2.46 23

12 3/4 x 41.16

12"13.200"

15 1/2 x 41.37

7

Dimension

T (in)

DIPS STUB END

Weight per

Package(lbs

1.8


Dimensions

BxC(in)

10"11.100


26/110

Nominalsize

PressureClass(psi)

DimensionsB.C. xT (in)

Weight perItem(lbs)

BoltDiameter

BoltNumber

Part #

2"

2.375"

Non

Pressure4 3/4 x 1 2 0.625 4

PEIHBBFKF

3"

3.500"

Non

Pressure6 x 1 2 0.625 4

PEIHBBFMF

4"

4.500"

Non

Pressure7 1/2 x 1 3 0.625 8

PEIHBBFPF

6"

6.625"

Non

Pressure9 1/2 x1 4 0.75 8

PEIHBBFUF

8"

8.625"

Non

Pressure11 3/4 x 1 6 0.75 8

PEIHBBFXF

10"

10.750"

Non

Pressure14 1/4 x 1 9 0.875 12

PEIHBBF10F

12"

12.750"

Non

Pressure17 x 1 13 0.875 12

PEIHBBF12F

14"

14.00"

Non

Pressure18 3/4 x 1 15 1 12

PEIHBBF14F

16"

16.00"

Non

Pressure21 1/4 x 1 19 1 16

PEIHBBF16F

18"

18.00"

Non

Pressure22 3/4 x 1 22 1.125 16

PEIHBBF18F

20"

20.000"

Non

Pressure25 x 1 20 1.125 20

PEIHBBF20F

22"

22.000"

Non

Pressure27 1/4 x 1 30 1.25 20

PEIHBBF22F

24"

24.000"

Non

Pressure29 1/2 x 1 36 1.25 20

PEIHBBF24F26"

26.000"

Non

Pressure31 3/4 x 1 61 1.25 24

PEIHBBF26F

28"

28.000"

Non

Pressure34 x 1 1/2 69 1.25 28

PEIHBBF28F

30"

30.000"

Non

Pressure36 x 1 1/2 78 1.25 28

PEIHBBF30F

32"

32.000"

Non

Pressure38 1/2 x 1 1/2 91 1.5 28

PEIHBBF32F

34"

34.000"

Non

Pressure40 1/2 x 1 1/2 99 1.5 32

PEIHBBF34F

36"

36.000"

Non

Pressure42 3/4 x 1 1/2 110 1.5 32

PEIHBBF36F

IPS HDPE BLIND FLANGE


27/110

IPS HDPE BLIND FLANGE

42"

42.000"

Non

Pressure 49 1/2 x 2 147 1.5 36 PEIHBBF42F

48"

48.000"

Non

Pressure56 x 2 244 1.5 44

PEIHBBF48F

54"

54.000"

Non

Pressure62 3/4 x 2 303 1.75 44

PEIHBBF54F


28/110

Pipe Outside F lange Inside Bolt Dia. Bolt Radius Weight Operating

Diameter Dia.

T ic nes

s Dia. Count Bolt Hole Circle r lbs/pc Pressure

O.D. T I.D. N B.D. B.C.

1/2 3.5 0.5 0.9 4 0.63 2.38 0.13 1 267

3/4 3.88 0.5 1.11 4 0.63 2.75 0.13 1 267

IBUPSDR70075C

1 4.25 0.56 1.38 4 0.63 3.13 0.13 1 267

IBUPSDR701C

1 1/4 4.63 0.63 1.72 4 0.63 3.5 0.19 2 267

IBUPSDR70125C

1 1/2 5 0.69 1.97 4 0.63 3.88 0.25 2 267

IBUPSDR70150C

2 6 0.75 2.46 4 0.75 4.75 0.31 3 267

IBUPSDR702C

2 6 0.5 2.63 4 0.75 4.75 0.2 1.5 160

IBUPSDR1102B

2 1/2 7 0.88 2.97 4 0.75 5.5 0.31 4 267

IBUPSDR70250C

3 7.5 0.94 3.6 4 0.75 6 0.4 4 267

IBUPSDR703C

3 7.5 0.53 3.75 4 0.75 6 0.28 2.5 160

IBUPSDR1103B

4 9 0.94 4.6 8 0.75 7.5 0.4 5.5 267

IBUPSDR704C

4 9 0.55 4.75 8 0.75 7.5 0.28 3.5 160

IBUPSDR1104B

5 10 0.94 5.69 8 0.88 8.5 0.44 6 267

IBUPSDR705C

6 11 1 6.75 8 0.88 9.5 0.4 7 267

IBUPSDR706C

6 11 0.63 6.88 8 0.88 9.5 0.28 4.5 160

IBUPSDR1106B

8 13.5 1.12 8.75 8 0.88 11.75 0.4 11 267

IBUPSDR708C

8 13.5 0.85 8.88 8 0.88 11.75 0.28 8 160

IBUPSDR1108B

10 16 1.19 10.92 12 1 14.25 0.4 16 267

IBUPSDR710C

10 16 0.98 11 12 1 14.25 0.31 12 160

IBUPSDR1110B

12 19 1.5 12.92 12 1 17 0.4 23 267

IBUPSDR712C

12 19 1.25 13.13 12 1 17 0.28 20 160

IBUPSDR1112B

14 21 1.63 14.18 12 1.13 18.75 0.4 37 267

IBUPSDR714C

14 21 1.38 14.38 12 1.13 18.75 0.31 30 160

IBUPSDR1114B

16 23.5 1.88 16.19 16 1.13 21.25 0.4 49 267

IBUPSDR716C

16 23.5 1.65 16.38 16 1.13 21.25 0.35 40 160

IBUPSDR1116B

18 25 1.8 18.2 16 1.25 22.75 0.4 48 267

18 25 1.75 18.2 16 1.25 22.75 0.4 48 200

18 25 1.67 18.38 16 1.25 22.75 0.35 45 160

IBUPSDR1118B

FERGUSON

PART #

CONVOLUTED DI BACK UP FLANGES

CFP = CALL FOR PRICE


29/110

Pipe Outside F lange Inside Bolt Dia. Bolt Radius Weight Operating

Diameter Dia.

T ic nes

s Dia. Count Bolt Hole Circle r lbs/pc Pressure

O.D. T I.D. N B.D. B.C.

FERGUSON

PART #

CONVOLUTED DI BACK UP FLANGES

CFP = CALL FOR PRICE

20 27.5 2.06 20.38 20 1.25 25 0.31 61 200

20 27.5 1.81 20.38 20 1.25 25 0.4 55 160

IBUPSDR1120B

22 29.5 2.13 22.38 20 1.38 27.25 0.31 72 200

22 29.5 2 22.38 20 1.38 27.25 0.37 65 160

IBUPSDR1122B

24 32 2.13 24.38 20 1.38 29.5 0.31 91 200

24 32 2.17 24.38 20 1.38 29.5 0.4 80 160

IBUPSDR1124B

30" 38.75 2.5 30.38 28 1.38 36 0.31 143 128

IBUPSDR13530B

36" 46 2.06 36.38 32 1.63 42.75 0.5 129 50

IBUPSDR32536B

1. Operating pressure on an HDPE flange adapter with a safety factor of 2.


30/110

160 DR 11 PEI11HMJMST

160 DR 11 PEI11HMJPST

160 DR 11 PEI11HMJUST

160 DR 11 PEI11HMJXST

160 DR 11 PEI11HMJ10ST

160 DR 11 PEI11HMJ12ST

8.62

10.75

12.75

Dimension

J (in)

3.50

4.50

6.62

IPS FAB MJADAPTER

Nominal

SizeActual OD

Pressure

Class

si

Feed

Stock

Dimension

A (in)

Less Accy Kit

3"

3.5000"9.00 5 4

Part #Bolt

Length

Number

of Bolts

6"

6.625"11.31 5 4

4"

4.5000"10.25 4 1/2 4

10"

10.750"13.56 6 8

8"

8.625"11.94 5 6

SEE IPS/DIPS ACCY KIT PRICE SHEET

12"

12.750"13.00 6 8


31/110

160 DR 11 PED11HMJP

200 DR 9

160 DR 11 PED11HMJU

200 DR 9

160 DR 11 PED11HMJX

200 DR 9

160 DR 11 PED11HMJ10

200 DR 9


200 DR 9


200 DR 9


200 DR 9

W/STIFFNER


200 DR 9 CFP

W/STIFFNER


200 DR 9 CFP

W/STIFFNER


200 DR 9 CFP

24"

25.800"18.00 7 14

20"

21.600"16.00 7 14

18"

19.500"13.00 7 1219.50

16"

17.400"13.00 7 1217.40

14"

15.30"13.00 7 1015.30

12"

13.200"13.00 6 813.20

10"

11.100"13.56 6 811.10

8"

9.050"14.00 5 69.05

Nominal Size

Actual OD Dimension

J (in)

Pressure

Class (psi)

6"

6.900"11.31

DIPS FAB MJ ADAPTER

6.90

4"

4.800"


ess ccy

4

Part #

LIST PRICE

/STIFFNER

/KIT

Number

of Bolts

List Price

Without Stiffiner

with kit

Bolt

Length

Dimension

A (in)

Feed

Stock

10.25 4 1/24.80

5 4

MJ ONLY SEE SEPARATE SHEET FOR ACCY KIT

FIP NORMALLY STOCKS THESE ITEMS

21.60

25.80


32/110

3" 5/8" X 5" 4 C6975069

4" 3/4" X 4 -1/2" 4 C6975026

6" 3/4" X 5" 6 C6975027

8" 3/4" X 5" 6 C6975028

10" 3/4" X 6" 8 C6975029

12" 3/4" X 6" 8 C6975030

14" 3/4" X 7" 10 IMJAPHD14

16" 3/4" X 7" 12 IMJAPHD16

18" 3/4" X 7" 12 IMJAPHD18

20" 3/4" X 7" 14 IMJAPHD20

24" 3/4" X 7" 16 IMJAPHD24

IPS/DIPS MJ ACCESSORY KIT INCLUDES GLAND

Bolt Number

of Bolts

Size Part

Number


33/110

Nominal

Size

Pressure

class (psi)STYLE

Dimensions

A x T x D (in)

Weight per

Item (lbs)Part #

160 PEI11HBWAWSKF

200 PEI9HBWAWSKF

160 PEI11HBWAWSMF200 PEI9HBWAWSMF

160 PEI11HBWAWSPF

200 PEI9HBWAWSPF

160 8 PEI11HBWAWSUF

200 12 PEI9HBWAWSUF

160 12 PEI11HBWAWSXF

200 22 PEI9HBWAWSXF

160 20 PEI11HBWAWS10F








160 1 88 PEI11HBWAWS18F








160 PEI11HBWAWS26F

200 PEI9HBWAWS26F

160 PEI11HBWAWS28F

200 PEI9HBWAWS28F

160 PEI11HBWAWS30F

200 PEI9HBWAWS30F

100 PEI17HBWAWS32F

160 PEI11HBWAWS32F

100 PEI17HBWAWS34F

160 PEI11HBWAWS34F

100 PEI17HBWAWS36F

160 PEI11HBWAWS36F

80 PEI21HBWAWS42F

100 PEI17HBWAWS42F

80 PEI21HBWAWS48F

100 PEI17HBWAWS48F

80 PEI21HBWAWS54F

100 PEI17HBWAWS54F54" 2 18 x 4 x 60 955

672

42" 2 18 x 4 x 47 1/2 505

48" 2 18 x 4 x 53 7/8

36" 2 11 1/2 x 4 x 40 3/4 523

34" 2 11 1/2 x 4 x 38 1/2 442

32" 2 11 1/2 x 3 1/2 x 36 1/2 377

30" 2 11 1/2 x 3 1/2 x 34 1/4 368

28" 2 11 1/2 x 3 1/2 x 32 1/4 304

26" 2 11 1/2 x 3 1/2 x 30 242

22" 10 x 3 3/8 x 25 1/2

24" 10 x 3 3/8 x 27 3/4

18" 10 x 3 3/8 x 20 1/2

20" 10 x 3 3/8 x 23 3/8

14" 1 10 x 2 1/2 x 17 1/4

16" 1 10 x 3 3/8 x 19 3/4

10" 1 7 x 2 1/2 x 12 3/4

12" 1 7 x 2 1/2 x 15 1/4

6" 1 7 x 1 15/16 x 8 3/8

8" 1 7 x 2 1/2 x 10 1/2

4" 1 5 1/2 x 1 1/4 x 6 1/4 4

1

3" 1 5 1/2 x 5/16 x 4 1/2 2

2" 1 5 1/2 x 5/8 x 3 1/2


34/110

160 PED11HBWAWSPF200 2 PED9HBWAWSPF

160 PED11HBWAWSUF

200 2 12 PED9HBWAWSUF

160 PED11HBWAWSXF

200 2 22 PED9HBWAWSXF

160 PED11HBWAWS10F

200 2 32 PED9HBWAWS10F

160 PED11HBWAWS12F


160 PED11HBWAWS14F


160 PED11HBWAWS16F


160 PED11HBWAWS18F


160 PED11HBWAWS20F


160 PED11HBWAWS24F


DIPS FABWALLANCHOR/WATER STOP


Pressure

class (psi)

Style Dimension

A x T x D (in)

Weight per

Item (lbs)Part #

4"4.80"

1

7 x 1 1/4 x 6 1/4 4

8"9.05"

17 x 2 1/2 x 10 7/8

12

6"6.90"

17 x 1 15/16 x 8 3/8

8

12"13.20"

17 x 2 1/2 x 15 5/16

36

10"11.10"

17 x 2 1/2 x 13 3 /16

20

16"17.40"

110 x 23 3/8 x 19 1/2

72

14"15.30"

110 x 2 1/2 x 17 3/8

54

20"21.60"

110 x 3 3/8 25 13/16

106

18"19.50"

110 x 3 3/8 x 21 5/8

88

24"25.80"

110 x 3 3/8 x 31

160


35/110

160 3 PEIPED11HBTPF

200 4 PEIPED9HBTPF

160 6 PEIPED11HBTUF

200 7 PEIPED9HBTUF

160 10 PEIPED11HBTXF

200 12 PEIPED9HBTXF

160 14 PEIPED11HBT10F














24" x 24"25.8" x 24.0'

15

18" x 18"19.5" x 18.0"

15

20" x 20"21.6" x 20.0"

15

14" x 14"15.3" x 14.0"

15

16" x 16"17.4" x 16.0"

15

10" x10"11.1" x 10.8"

13

12" x 12"13.2" x 12.8"

15

6" x 6"6.9" x 6.6"

11 3/4

8" x 8"

9.1" x 8.6"

13

Part #

4" x 4"4.8" x 4.5"

10

IPS / DIPS FAB TRANSITION

Nominal Size

Actual OD

Pressure

Class (psi)

Dimension

L (in)

Weight per

Item (lbs)


36/110

Nominal Size DR/WallDimension

L (in)

Package

Weight (lbs)CSA IAPMO Part #

1/2" CTS 0.09 1.65 0.2 X

3/4 CTS 0.09 2.14 0.2

0.102

1.125

1/2" IPS DR 9.3 2.07 0.2

3/4" IPS DR 11 2.04 0.3 X PEI11ABCAF

DR 9

DR 11 X X PEI11ABCAG

DR 9

DR 10 X

DR11 X PEI11ABCAH

1 1/2 " IPS DR 11 2.58 1.3 X PEI11ABCAJ

DR 7 3.2DR 9 X PEI9ABCAK

DR 11 X PEI11ABCAK

DR17

DR 7 7.43 10 PEI7ABCAM

DR 9 8.1

DR 11/ 11. X X PEI11ABCAM

DR 13.5 X

DR 17 PEI17ABCAM

DR 7 PEI7ABCAP

DR 9 PEI9ABCAP

DR 11/11.5 X X PEI11ABCAP

DR 13.5 X

DR 17 PEI17ABCAPDR 7 PEI7ABCAU

DR 9

DR 11/11.5 PEI11ABCAU

DR 13.5

DR 17 PEI17ABCAU

DR 7

DR 9 PEI9ABCAX

DR 11 X PEI11ABCAX

DR 13.5 X

DR 17 PEI17ABCAX

IPS MOLDED END CAP

1" CTS 2.18 0.3

3.25

1" IPS 2.09 0.5

1 1/4" IPS 1.2

3" IPS

5.6

2" IPS 7.002.6

4" IPS

23.7

9

7.75

6" IPS

27.9

14.1

10.25

8" IPS 12.41

5.6

4.3


37/110

Nominal Size Dimensions Weight per

Actual ODL (in)

Item (lbs.)

1010.75

200 DR 9 4.00 N 12 $234.00PEI9HBCA10F

1212.75

200 DR 9 4.00 N 16 $435.00PEI9HBCA12F

1414.00

200 DR 9 4.00 N 23 $520.00PEI9HBCA14F

160 DR 11 N $526.00 PEI11HBCA16F

200 DR 9 N $630.00 PEI9HBCA16F

160 DR 11 N $635.00 PEI11HBCA18F

200 DR 9 N $749.00 PEI9HBCA18F

100 DR 17 N $751.00 PEI17HBCA20F

160 DR 11 N $750.00 PEI11HBCA20F

100 DR 17 N $999.00 PEI17HBCA22F

160 DR 11 N $1005.00 PEI11HBCA22F

100 DR 17 N $1170.00 PEI17HBCA24F

160 DR 11 N $1172.00 PEI11HBCA24F

Standard

Item List Price

Without Pup

Fabricated IPS End Caps

1818.00

4.00 37

4.00 64

2222.00

4.00 55

2424.00

2020.00

4.00 45

PART#W/O PUP

1616.00

4.00 28

Pressure

Class (psi)

SDR


38/110

100 12 PEI17HBR10XF160 13 PEI11HBR10XF

100 19 PEI17HBR12XF

160 19 PEI11HBR12XF

100 20 PEI17HBR1210F

160 20 PEI11ABSR1210F

100 26 PEI17HBR1410F

160 26 PEI11HBR1410F

100 28 PEI17HBR1412F

160 28 PEI11HBR1412F

100 36 PEI17HBR1614F160 36 PEI11HBR1614F

100 45 PEI17HBR1814F

160 45 PEI11HBR1814F

100 47 PEI17HBR1816F

160 47 PEI11HBR1816F

100 56 PEI17HBR2018F

160 56 PEI11HBR2018F

100 69 PEI17HBR2220F

160 69 PEI11HBR2220F

100 82 PEI17HBR2420F

160 82 PEI11HBR2420F100 84 PEI17HBR2422F

160 84 PEI11HBR2422F

Weight per

Item (lbs)Part #

14

14

CALL FOR PRICE ON LARGER SIZES

IPS FAB REDUCER

Nominal SizePressure

Class (psi)

Dimension

L (in)

18" x 16"

18.000" x 16.000

18

14

14

20" x 18"

20.000" x 18"22" x 20"

22.000" x 20.000"

24" x 22"

24.000" x 22.000"

24" x 20"

24.000" x 20.000"

18

16" x 14"16.000" x 14.00

14

14

18" x 14"

18.000" x 14.000

14" x 10"

14.00" x 10.750

14

12

14" x 12"14.000" x 12.750"

10 " x 8"10.750" x 8.625"

12" x 8"

12.750" x 8.625"

12

12

12" x 10"

12.750" x 10.750"


39/110

Dimensions

N

100 N PEI17HBERMKF

160 N PEI11HBERMKF

N

100 N PEI17HBERPMF

160 N PEI11HBERPMF

N

100 N PEI17HBERUMF

160 N PEI11HBERUMF

N

100 N PEI17HBERUPF

160 N PEI11HBERUPF

N

100 N PEI17HBERXPF

160 N PEI11HBERXPF

N

100 N PEI17HBERXUF

160 N PEI11HBERXUF

N

100 N PEI17HBER10UF

160 N PEI11HBER10UF

N

100 N PEI17HBER10XF

160 N PEI11HBER10XF

N

100 N PEI17HBER12XF

160 N PEI11HBER12XF

N

100 N PEI17HBER1210F




N



PART #

IPS FAB ECCENTRIC REDUCER

14 X 1014.00 X 10.75

21.00 36

14 X 1 214.00 X 12.75

22.50 36

12 X 812.75 X 8.63

19.50 28

12 X 1012.75 X 10.75

19.50 28

1 0 X 610.75 X 6.63

17.50 18

1 0 X 810.75 X 8.63

18.00 18

8 X 48.63 X 4.50

16.00 10

8 X 68.63 X 6.63

16.50 11

6 X 36.63 X 3.50

14.50 6

6 X 46.63 X 4.50

15.50 6

3 X 23.50 X 2.38

13.00 2

4 X 34.50 X 3.50

14.00 3

L (in)Actual OD Item (lbs.)

Nominal Size Pressure

Class (psi)

Std.

Item

Weight per


40/110

IPS FAB ECCENTRIC REDUCER

N



N



N



N



N



N



N



N



50 N



50 N



50 N



50 N

100 N PEI17HBER3026G


28 X 2628.00 X 26.00

54.20 265

30 X 2630.00 X 26.00

53.60 306

26 X 2426.00 X 24.00

39.90 230

28 X 2428.00 X 24.00

39.20 265

24 X 2024.00 X 20.00

22.50 134

18 X 1418.00 X 14.00

22.50 61

18 X 1618.00 X 16.00

22.50

24 X 2224.00 X 22.00

22.50 134

20 X 1620.00 X 16.00

22.50 75

20 X 1820.00 X 18.00

22.50 75

61

16 X 1216.00 X 12.7522.50 46

16 X 1416.00 X 14.00

22.50 46


41/110

16014

33 PED11HBR1412F

160 14 33 PED11HBR1614F

160

14

53 PED11HBR1816F

160

25

74 PED11HBR2018F

16025

125 PED11HBR2420F

160

11

PED11HBR10XF

12"x 10"

13.200" x 11.10"160 12 23 PED11HBR1210F

10" x 8"

11." x 9.050"

18" x 16"

19.50" x 17.40"

24" x 20"

25.88" x 21.60"

20" x 18"

21.00" x 19.50"

6" x 4"

6.900" x 4.800'160 6 7

12 16

Part #

16''x 14"

17.40" x 15.30"

14''x 12"

15.30" x 13.20"

PED11HBRUPF

PED11HBRXUF8" x 6"

9.050" x 6.900"160 10

DIPS FAB CONCENTRIC REDUCER

Nominal Size

Actual OD

Pressure

Class (psi)

Dimension

L (in)

Weight per

Item (lbs)


42/110

Nominal Size DRDimensions

A x B x L (in)

Package

Weight (lbs)Part #

1" x1/2" IPS DR 11 x 9.3 1.50 X 1.25 X 4.0 0.7 PEI11HBRGD

1" IPS x 3/4" IPS DR 11 x11 1.50 1.75 X 4.50 0.8 PEI11ABRGFDR 10 x 11

DR 11 x 11 PEI11ABRHG

DR 9 X 9

DR 11 x 11 PEI11ABRJF

DR 9 X 9

DR 11 x 11 PEI11ABRJG

2" x 1" IPS DR 11 x 11 2.49 X 2.88 X 6.31 3 PEI11ABRKG

DR 9 x 9

DR 11 x 10

DR 11x 11 PEI11ABRKH

DR 9 x 9 PEI9ABRKJ

DR 11x 11 PEI11ABRKJ

DR 7 x 7 PEI7ABRMKDR 9 x 9 PEI9ABRMK

DR 11 x 11 PEI11ABRMK

DR 13.5 x 13.5

DR 17 x 17 PEI17ABRMK

DR 7 x 7 16.3 PEI7ABRPK

DR 9 x 9 15.3 PEI9ABRPK

DR 11 x 11 PEI11ABRPK

DR 13.5 x 13.5

DR 17 x 17 PEI17ABRPK

DR 7 x 7 PEI7ABRPM

DR 9 x 9 PEI9ABRPM

DR 11 x 11 PEI11ABRPM

DR 13.5 x 13.5

DR 17 x 17 PEI17ABRPMDR 7 x 7 24.6 PEI7ABRUP

DR 9 x 9 23 PEI9ABRUP

DR 11 x 11 27.1 PEI11ABRUP

DR 13.5 x 13.5 26.2

DR 17 x 17 24.8 PEI17ABRUP

DR 7 x 7 PEI7ARXU

DR 9 x 9 PEI9ABRXU

DR 11 x 11 PEI11ABRXU

DR 13.5 x 13.5

DR 17 x 17 PEI17ABRXU

9.9

7.5

6" IPS x 4"IPS

8" IPS x 6" IPS 5.00 x 4.64 x 10.70

4.22 x 3.75 x 9.13

4" IPSx 3"IPS

17.3

14.6

3.13 x 3.13 x 8.62

4" IPSx 2" IPS

11.63.00 X 3.00 X 11.87

3.22 X 2.50 X 6.553"IPS x 2" IPS

9.7

$8.50

2.50 X 2.72 X 6.00

2" x 1 1/4" IPS 3.5

2" x 1 1/2" IPS 3

3.15 X 2.56 X 6.44

1 1/2"IPS x 3/4" IPS 2.3

1 1/2"IPS x 1" IPS 2.52.50 X 2.28 X5.75

2.50 X 2.40 X 5.69

IPS MOLDEDREDUCER

1 1/4 " IPS x 1" IPS 1.21.86 X 1.92 X 4.25


43/110

80 DR 17 1 PEI17HB225KF2

128 DR 11 1 PEI11HB225KF2

160 DR 9 1 PEI9HB225KF2

200 DR 7 1 PEI7HB225KF2

80 DR 17 1 PEI17HB225MF2

128 DR 11 1 PEI11HB225MF2

160 DR 9 1 PEI9HB225MF2

200 DR 7 2 PEI7HB225MF2

80 DR 17 2 PEI17HB225PF2

128 DR 11 2 PEI11HB225PF2

160 DR 9 3 PEI9HB225PF2

200 DR 7 3 PEI7HB225PF2

80 DR 17 6 PEI17HB225UF2

128 DR 11 6 PEI11HB225UF2

160 DR 9 7 PEI9HB225UF2

200 DR 7 8 PEI7HB225UF2

80 DR 17 10 PEI17HB225XF2

128 DR 11 10 PEI11HB225XF2

160 DR 9 12 PEI9HB225XF2

200 DR 7 15 PEI7HB225XF2

80 DR 17 11 PEI17HB22510F2

128 DR 11 17 PEI11HB22510F2

160 DR 9 20 PEI9HB22510F2

200 DR 7 24 PEI7HB22510F2

80 DR 17 19 PEI17HB22512F2

128 DR 11 28 PEI11HB22512F2

160 DR 9 34 PEI9HB22512F2

200 DR 7 42 PEI7HB22512F2

80 DR 17 23 PEI17HB22514F2

128 DR 11 35 PEI11HB22514F2

160 DR 9 41 PEI9HB22514F2

200 DR 7 51 PEI7HB22514F2

80 DR 17 31 PEI17HB22516F2

128 DR 11 46 PEI11HB22516F2

160 DR 9 55 PEI9HB22516F2

200 DR 7 66 PEI7HB22516F2

80 DR 17 41 PEI17HB22518F2

128 DR 11 60 PEI11HB22518F2

160 DR 9 71 PEI9HB22518F2

200 DR 7 85 PEI7HB22518F2

IPS FAB 2 SEG. 22.5 ELBOW

Nominal Size

Actual OD

Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

Weight per

Item (lbs)Part #

2"

2.3750"13 1/8 x 4 x 4 1/4

3"

3.50"13 5/8 x 4 x 4 3/8

4"

4.5000"14 1/4 x 5 x 5 1/2

6"

6.625"15 1/4 x 6 x 16 5/8

8"

8.625"

16 1/4 x 6 1/2 x 7

3/8

10"

10.750"

17 1/4 x 6 1/2 x 7

5/8

12"

12.750"19 1/2 x 8 x 9 1/4

14"

14.000"

21 x 8 x 9 3/8

16"

16.000"24 x 8 x 9 5/8

18"

18.000"27 x 8 x 9 3/4


44/110

IPS FAB 2 SEG. 22.5 ELBOW

Nominal Size

Actual OD

Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

Weight per

Item (lbs)Part #

80 DR 17 51 PEI17HB22520F2

128 DR 11 75 PEI11HB22520F2

160 DR 9 90 PEI9HB22520F2

200 DR 7 108 PEI7HB22520F2

80 DR 17 63 PEI17HB22522F2

128 DR 11 93 PEI11HB22522F2

160 DR 9 111 PEI9HB22522F2

200 DR 7 133 PEI7HB22522F2

80 DR 17 76 PEI17HB22524F2

128 DR 11 113 PEI11HB22524F2

160 DR 9 135 PEI9HB22524F2

200 DR 7 161 PEI7HB22524F2

80 DR 17 142 PEI17HB22526F2

128 DR 11 220 PEI11HB22526F2

160 DR 9 253 PEI9HB22526F280 DR 17 167 PEI17HB22528F2

128 DR 11 249 PEI11HB22528F2

160 DR 9 297 PEI9HB22528F2

80 DR 17 194 PEI17HB22530F2

128 DR 11 289 PEI11HB22530F2

160 DR9 345 PEI9HB22530F2

80 DR 17 223 PEI17HB22532F2

128 DR 11 333 PEI11HB22532F2

80 DR 17 255 PEI17HB22534F2

128 DR 11 380 PEI11HB22534F2

80 DR 17 286 PEI17HB22536F2

128 DR 11 426 PEI11HB22536F2

65 DR 21 462 PEI21HB22542F2

80 DR 17 563 PEI17HB22542F2

65 DR 21 617 PEI21HB22548F2

80 DR 17 753 PEI17HB22548F2

50 DR 26 652 PEI26HB22554F2

65 DR 21 799 PEI21HB22554F2

20"

20.000"30 x 8 x 10

22"

22.000"33 x 8 x 10 1/4

24"

24.000"36 x 8 x 10 3/8

26"

26.000"39 x 14 x 16 5/8

28"

28.000"42 x 14 x 16 3/4

30"

30.000"

45 x 14 x 17

32"

32.000"48 Xx14 x 17 1/8

34"

34.000"51 x 14 x 17 3/8

36"

36.000"54 x 14 x 17 5/8

54"

54.000"81 x 21 x 26 3/8

42"42.000"

63 x 21 x 25 1/8

48"

48.000"72 x 21 x 25 3/4


45/110

128 DR 11 1 PEI11HB3KF2

160 DR 9 1 PEI9HB3KF2200 DR 7 1 PEI7HB3KF2

128 DR 11 1 PEI11HB3MF2

160 DR 9 2 PEI9HB3MF2


128 DR 11 2 PEI11HB3PF2

160 DR 9 3 PEI9HB3PF2


128 DR 11 6 PEI11HB3UF2

160 DR 9 7 PEI9HB3UF2


128 DR 11 11 PEI11HB3XF2

160 DR 9 13 PEI9HB3XF2



160 DR 9 22 PEI9HB310F2

200 DR 7 26 PEI7HB310F2

80 DR 17 21 PEI17HB312F2

128 DR 11 32 PEI11HB312F2

160 DR 9 38 PEI9HB312F2

200 DR 7 45 PEI7HB312F2

80 DR 17 27 PEI17HB314F2

128 DR 11 40 PEI11HB314F2

160 DR 9 48 PEI9HB314F2

200 DR 7 58 PEI7HB314F2

80 DR 17 37 PEI17HB316F2

128 DR 11 55 PEI11HB316F2

160 DR 9 66 PEI9HB316F2

200 DR 7 79 PEI7HB316F2

80 DR 17 47 PEI17HB318F2

128 DR 11 70 PEI11HB318F2

160 DR 9 83 PEI9HB318F2

200 DR 7 100 PEI7HB318F2

80 DR 17 60 PEI17HB320F2

128 DR 11 90 PEI11HB320F2

160 DR 9 108 PEI9HB320F2

200 DR 7 129 PEI7HB320F2

IPS FAB 2 SEG. 30 ELBOW

Weight per

Item (lbs)Part #


Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

2"2.375" 6 7/8 x 4 x 4 3/8

3"3.500"

7 3/8 x 4 x 4 1/2

4"4.500"

7 7/8 x 5 x 5 5/8

6"6.625"

12 5/8 x 6 x 6 7/8

8"8.625"

13 5/8 x 6 1/2 x 7 5/8

10"10.750"

16 1/2 X 6 1/2 X 8

12"12.750"

19 1/8 X 8 X 9 3/4

14"14.000"

21 X8 X 9 7/8

16"16.000" 24 X 8 X 10 1/8

18"18.000"

27 X 8 X 10 1/2

20"20.000"

30 X 8 X 10 3/4


46/110


Weight per

Item (lbs)Part #


Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

80 DR 17 76 PEI17HB322F2

128 DR 11 114 PEI11HB322F2

160 DR 9 136 PEI9HB322F2

128 DR 7 162 PEI7HB322F2

80 DR 17 94 PEI17HB324F2

128 DR 11 141 PEI11HB324F2

160 DR 9 168 PEI9HB324F2

200 DR 7 201 PEI7HB324F2

80 DR 17 198 PEI17HB328F2

128 DR 11 295 PEI11HB328F2

160 DR 9 353 PEI9HB328F2

80 DR 17 228 PEI17HB330F2

128 DR 11 339 PEI11HB330F2

160 DR 9 405 PEI9HB330F2

80 DR 17 266 PEI17HB332F2

128 DR 11 396 PEI11HB332F2

80 DR 17 307 PEI17HB334F2

128 DR 11 458 PEI11HB334F2

80 DR 17 353 PEI17HB336F2

128 DR 11 525 PEI11HB336F2

65 DR 21 513 PEI21HB342F2

80 DR 17 659 PEI17HB342F2

65 DR 21 742 PEI21HB348F2

80 DR 17 900 PEI17HB348F2

50 DR 26 775 PEI26HB354F2

65 DR 21 969 PEI21HB354F2

22"22.000"

33 X 8 X 11

24"24.000"

36 X 8 X 11 1/4

28"28.000"

42 X 14 X 17 3/4

30"

30.000"

45 X 14 X 18

32"32.000"

48 X 14 X 18 1/4

34"34.000"

51 X 14 X 18 1/2

36"36.000"

54 X 14 X 18 7/8

54"54.000"

81 X 21 X 28 1/2

42"42.000"

63 X 21 X 26 5/8

48"48.000"

72 X 21 X 27 1/2


47/110

80 DR 17 12 PEI17HB410F2

128 DR 11 18 PEI11HB410F2

160 DR 9 22 PEI9HB410F2

200 DR 7 26 PEI7HB410F2

80 DR 17 21 PEI17HB412F2

128 DR 11 32 PEI11HB412F2

160 DR 9 38 PEI9HB412F2


128 DR 11 40 PEI11HB414F2

160 DR 9 48 PEI9HB414F2

200 DR 7 58 PEI7HB414F2

80 DR 17 37 PEI17HB416F2

128 DR 11 55 PEI11HB416F2

160 DR 9 66 PEI9HB416F2

200 DR 7 79 PEI7HB416F2

80 DR 17 47 PEI17HB418F2

128 DR 11 70 PEI11HB418F2

160 DR 9 83 PEI9HB418F2

200 DR 7 100 PEI7HB418F2

80 DR 17 60 PEI17HB420F2

128 DR 11 90 PEI11HB420F2

160 DR 9 108 PEI9HB420F2

200 DR 7 129 PEI7HB420F2

80 DR 17 76 PEI17HB422F2

128 DR 11 114 PEI11HB422F2

160 DR 9 136 PEI9HB422F2

200 DR 7 162 PEI7HB422F2



Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

Weight per

Item (lbs)Part #

10"10.750"

12 5/8 x 6 1/2 x 8 3/4

12"12.750" 13 5/8 x 8 x 10 5/8

14"14.000" 14 1/4 x 8 x 10 7/8

16"16.000"

15 1/4 x 8 x 11 5 /16

18"18.000"

16 1/4 x 8 x 11 3/4

20"20.000"

17 1/4 x 8 x 12 1/8

22"22.000"

23 1/16 x 8 x 12 9/16


48/110



Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

Weight per

Item (lbs)Part #

80 DR 17 94 PEI17HB424F2

128 DR 11 141 PEI11HB424F2

160 DR 9 168 PEI9HB424F2

200 DR 7 201 PEI7HB424F2

80 DR 17 198 PEI17HB428F2

128 DR 11 295 PEI11HB428F2

160 DR 9 353 PEI9HB428F2

80 DR 17 228 PEI17HB430F2

128 DR 11 339 PEI11HB430F2

160 DR 9 405 PEI9HB430F2

80 DR 17 266 PEI17HB432F2

128 DR 11 396PEI11HB432F2

80 DR 17 307 PEI17HB434F2

128 DR 11 458 PEI11HB434F2

80 DR 17 353 PEI17HB436F2

128 DR 11 525 PEI11HB436F2

65 DR 21 513 PEI21HB442F2

80 DR 17

659 PEI17HB442F2

65 DR 21 742 PEI21HB448F2

80 DR 17 905 PEI17HB448F2

50 DR 26 775 PEI26HB454F2

65 DR 21 969 PEI21HB454F2

24"24.000"

24 1/16 x 8 x 13

28"28.000"

38 3/16 x 14 x 19

13/16

30"

30.000"

38 5/16 x 14 x 20

3/16

32"32.000"

38 3/8 x 14 x 20 5/8

34"34.000"

38 7/16 x 14 x 21

1/16

36"36.000"

38 1/2 x 14 x 21 7/16

54"54.000" 50 3/4 x 21 x 32 3/16

42"42.000"

50 5/16 x 21 x 29

11/16

48"48.000"

50 9/16 x 21 x 30

15/16


49/110


Part #

128 DR 11 1 PEI11HB4KF3

160 DR 9 1 PEI9HB4KF3

200 DR 7 1 PEI7H4BKF3

128 DR 11 2 PEI11HB4MF3



128 DR 11 3 PEI11HB4PF3



128 DR 11 8 PEI11HB4UF3



128 DR 11 15 PEI11HB4XF3



80 DR 17 16 PEI17HB410F3

128 DR 11 24 PEI11HB410F3

160 DR 9 29 PEI9HB410F3

200 DR 7 35 PEI7HB410F3

80 DR 17 27 PEI17HB412F3

128 DR 11 40 PEI11HB412F3

160 DR 9 48 PEI9HB412F3

200 DR 7 60 PEI7HB412F3


160 DR 9 60 PEI9HB414F3

200 DR 7 74 PEI7HB414F3

80 DR 17 46 PEI17HB416F

128 DR 11 70 PEI11HB416F3

160 DR 9 83 PEI9HB416F3

200 DR 7 99 PEI7HB416F3

Weight per

Item (lbs)

2"2.375"

13 1/8 x 4 x 7

3"3.500"

13 5/8 x 4 x 7 1/4


Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

4"4.500"

14 1/4 x 5 x 8 1/2

6"6.625"

15 1/4 x 6 x 10

8"8.625"

16 1/4 x 6 1/2 x 10 7/8

10"10.750"

17 1/4 x 6 1/2 x 11 1/4

12"12.750"

19 1/2 x 8 x 13 1/2

14"14.000"

21 x 8 x 13 7/8

16"16.000"

24 x 8 x 14 3/4


50/110


Part #Weight per

Item (lbs)Nominal Size

Actual OD

Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

80 DR 17 62 PEI17HB418F3

128 DR 11 92 PEI11HB418F3

160 DR 9 111 PEI9HB418F3

200 DR 7 132 PEI7HB418F3

80 DR 17 80 PEI17HB420F3

128 DR 11 121 PEI11HB420F3

160 DR 9 144 PEI9HB420F3

200 DR 7 171 PEI7HB420F3

80 DR 17 104 PEI17HB422F3

128 DR 11 153 PEI11HB422F3

160 DR 9 183 PEI9HB422F3

200 DR 7 219 PEI7HB422F3

80 DR 17 129 PEI17HB424F3

128 DR 11 191 PEI11HB424F3

160 DR 9 228 PEI9HB424F3

200 DR 7 272 PEI7HB424F3

80 DR 17 209 PEI17HB426F3

128 DR 11 323 PEI11HB426F3

160 DR 9 371 PEI9HB426F3

200 DR 7 443 PEI7HB426F3

80 DR 17 250 PEI17HB428F3

128 DR 11 372 PEI11HB428F3

160 DR 9 444 PEI9HB428F3


160 DR9 526 PEI9HB430F3

80 DR 17 347 PEI17HB432F3

128 DR 11516 PEI11HB432F3

18"18.000"

27 x 8 x 15 5/8

20"20.000"

30 x 8 x 16 1/2

22"22.000" 33 x 8 x 17 1/4

24"24.000"

36 x 8 x 18 1/8

26"26.000"

39 x 14 x 25

28"28.000"

42 x 14 x 25 7/8

30"30.000"

45 x 14 x 26 5/8

32"32.000"

48 x 14 x 27 1/2


51/110


Part #Weight per

Item (lbs)Nominal Size

Actual OD

Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)

80 DR 17 404 PEI17HB434F3

128 DR 11601 PEI11HB434F3

80 DR 17 466 PEI17HB436F3

128 DR 11 693 PEI11HB436F3

65 DR 21 691 PEI21HB442F3

80 DR 17 844 PEI17HB442F3

65 DR 21 960 PEI21HB448F3

80 DR 17 1171 PEI17HB448F3

50 DR 26 1051 PEI26HB454F3

65 DR 21 1287 PEI21HB454F3

34"34.000"

51 x 14 x 28 3/8

36"36.000"

54 x 14 x 29 1/4

42"42.000"

63 x 21 x 38 3/4

48"

48.000"

72 x 21 x 41 1/4

54"54.000"

81 x 21 x 43 3/4


52/110

Nominal Size Pressure Dimensions Weight per Part #

Actual OD Class (psi) R x C x B (in) Item (lbs.)

80 DR 17 14 PEI17HB9XF3

128 DR 11 20 PEI11HB9XF3

160 DR 9 23 PEI9HB9XF3200 DR 7 29 PEI7HB9XF3

80 DR 17 21 PEI17HB910F3

128 DR 11 31 PEI11HB910F3

160 DR 9 37 PED9HB910F3

200 DR 7 43 PEI7HB910F3

80 DR 17 34 PEI17HB912F3

128 DR 11 51 PEI11HB912F3

160 DR 9 61 PEI9HB912F3

200 DR 7 72 PEI7HB912F3

80 DR 17 42 PEI17HB914F3

128 DR 11 62 PEI11HB914F3


80 DR 17 56 PEI17HB916F3

128 DR 11 84 PEI11HB916F3

160 DR 9 100 PEI9HB916F3

200 DR 7 120 PEI7HB916F3

80 DR 17 76 PEI17HB918F3

128 DR 11 113 PEI11HB918F3

160 DR 9 135 PEI9HB918F3

200 DR 7 161 PEI7HB918F3

80 DR 17 98 PEI17HB920F3

128 DR 11 147 PEI11HB920F3


80 DR 17 134 PEI17HB922F3

128 DR 11 201 PEI11HB922F3

160 DR 9 239 PEI9HB922F3

200 DR 7 286 PEI7HB922F3

80 DR 17 167 PEI17HB924F3

128 DR 11 250 PEI11HB924F3

160 DR 9 298 PED9HB924F3

200 DR 7 356 PEI7HB924F3

Feed

Stock

FAB IPS 3 SEG 90

1010.750

12 5/8 x 6 1/2 x 16 1/8

8

8.62510 3/4 X 6 1/2 X 14 5/8

1212.750 13 5/8 x 8 x 18 5/8

1414.000 14 1/4 x 8 x 19 1/4

1616.000 15 1/4 x 8 x 20 1/4

1818.000 16 1/4 x 8 x 21 1/4

2020.000 17 1/4 x 8 x 22 1/4

2222.000 23 1/16 x 8 x 26 1/16

2424.000

24 1/16 x 8 x 27 1/16


53/110

Nominal Size Pressure Dimensions Weight per Part #

Actual OD Class (psi) R x C x B (in) Item (lbs.)

Feed

Stock

FAB IPS 3 SEG 90

80 DR 17 352 PEI17HB928F3

128 DR 11 525 PEI11HB928F3

160DR 9

626 PEI9HB928F380 DR 17 410 PEI17HB930F3


80 DR 17 473 PEI17HB932F3

128 DR 11 705PEI11HB932F3

80 DR 17 542 PEI17HB934F3

128 DR 11 807 PEI11HB934F3

80 DR 17 616 PEI17HB936F3

128 DR 11 917 PEI11HB936F3

65 DR 21 925 PEI21HB942F3

80DR 17

1,129 PEI17HB942F365 DR 21 1,244 PEI21HB948F3

80 DR 17 1,518 PEI17HB948F3

50 DR 26 1,284 PEI26HB954F3

65 DR 21 1,605 PEI21HB954F3

2828.000

38 3/16 x 14 x 42 3/16

3030.000

38 5/16 x 14 x 42 5/8

3232.000

38 3/8 x 14 x 43 1/8

3434.000

38 7/16 x 14 x 43 9/16

3636.000

38 1/2 x 14 x 44

5454.000

50 3/4 x 21 x 61 15/16

42

42.000

50 5/16 x 21 x 59 3/16

4848.000

50 9/16 x 21 x 60 9/16


54/110

IPS FAB 5 SEG. 90 ELL

80 DR 17 PEI17HB9KF5

128 DR 11 2 PEI11HB9KF5



80 DR 17 PEI17HB9MF5

128 DR 11 3 PEI11HB9MF5



80 DR 17 PEI17HB9PF5

128 DR 11 6 PEI11HB9PF5



80 DR 17 PEI17HB9UF5

128 DR 11 13 PEI11HB9UF5



80 DR 17 PEI17HB9XF5

128 DR 11 24 PEI11HB9XF5



80 DR 17 26 PEI17HB910F5

128 DR 11 39 PEI11HB910F5

160 DR 9 47 PEI9HB910F5

200 DR 7 58 PEI7HB910F5

80 DR 17 43 PEI17HB912F5

128 DR 11 64 PEI11HB912F5

160 DR 9 77 PEI9HB912F5

200 DR 7 95 PEI7HB912F5

Weight

perPart #

2"2.375"

13 1/8 x 4 x 14 3/4


Pressure

Class

Feed

Stock

Dimension

R x C x B (in)

3"3.500"

13 5/8 x 4 x 15 1/4

4"4.500"

14 1/4 x 5 x 16 7/8

6"6.625"

15 1/4 x 6 x 18 7/8

8"8.625" 16 1/4 x 6 1/2 x 20 3/8

10"10.750"

17 1/4 x 6 1/2 x 21 3/8

12"12.750"

19 1/2 x 8 x 24 7/8


55/110


Weight

perPart #


Pressure

Class

Feed

Stock

Dimension

R x C x B (in)

80 DR 17 54 PEI17HB914F5

128 DR 11 81 PEI11HB914F5

160 DR 9 97 PEI9HB914F5

200 DR 7 120 PEI7HB914F5

80 DR 17 77 PEI17HB916F5

128 DR 11 115 PEI11HB916F5

160 DR 9 137 PEI9HB916F5

200 DR 7 164 PEI7HB916F5

80 DR 17 106 PEI17HB918F5

128 DR 11 158 PEI11HB918F5

160 DR 9 189 PEI9HB918F5

200 DR 7 225 PEI7HB918F5

80 DR 17 141 PEI17HB920F5

128 DR 11 210 PEI11HB920F5

160 DR 9 251 PEI9HB920F5

200 DR 7 300 PEI7HB920F5

80 DR 17 183 PEI17HB922F5

128 DR 11 273 PEI11HB922F5

160 DR 9 325 PEI9HB922F5

200 DR 7 389 PEI7HB922F5

80 DR 17 232 PEI17HB924F5

128 DR 11 346 PEI11HB924F5

160 DR 9 413 PEI 9HB924F5

200 DR 7 493 PEI7HB924F5

80 DR 17 376 PEI17HB926F5

128 DR 11 583 PEI11HB926F5

160 DR 9 669 PEI9HB926F5

200 DR 7 800 PEI7HB926F5

14"

14.000"21 x 8 x 26 1/4

16"16.000"

24 x 8 x 28 7/8

18"18.000"

27 x 8 x 31 3/8

20"20.000"

30 x 8 x 34

22"22.000" 33 x 8 x 36 5/8

24"24.000"

36 x 8 x 39 1/4

26"26.000"

39 x 14 x 47 7/8


56/110


Weight

perPart #


Pressure

Class

Feed

Stock

Dimension

R x C x B (in)

80 DR 17 415 PEI17HB928F5

128 DR 11 619 PEI11HB928F5

160 DR 9 739 PEI9HB928F5

80 DR 17 500 PEI17HB930F5

128 DR 11 744 PEI11HB930F5

160 DR 9 888 PEI9HB930F5

80 DR 17 594 PEI17HB932F5

128 DR 11 885 PEI11HB932F5

80 DR 17 700 PEI17HB934F5

128 DR 11 1043 PEI11HB934F5

80 DR 17 818 PEI17HB936F5

128 DR 11 1218 PEI11HB936F5

65 DR 21 1150 PEI21HB942F5

80 DR 17 1403 PEI17HB942F5

65 DR 21 1645 PEI21HB948F5

80 DR 17 2007 PEI17HB948F5

50 DR 26 1847 PEI26HB954F5

65 DR 21 2262 PEI21HB954F5

28"28.000"

42 x 14 x 50 3/8

30"

30.000"

45 x 14 x 53

32"32.000"

48 x 14 x 55 5/8

34"34.000"

51 x 14 x 58 1/4

36"36.000"

54 x 14 x 60 7/8

54"

54.000" 81 x 21 x 91 1/4

42"42.000"

63 X 21 X 75 5/8

48"48.000"

72 x 21 x 83 1/2


57/110

200 DR 9 3 P29LS90

160 DR 11 2.0 P211LS90

100 DR 17 2.0 P217LS90

200 DR 9 5.0 P39LS90

160 DR 11 4.0 P311LS90

100 DR 17 3.0 P317LS90

200 DR 9 8.0 P49LS90

160 DR 11 7.0 P411LS90

100 DR 17 6.0 P417LS90

200 DR 9 24.0 P69LS90160 DR 11 20.0 P611LS90

100 DR 17 14.0 P617LS90

200 DR 9 50.0 P89LS90

160 DR 11 44.0 P811LS90

100 DR 17 19.0 P817LS90

200 DR 9 101.0 P109LS90

160 DR 11 85.0 P1011LS90

100 DR 17 57.0 P1017LS90

200 DR 9 165.0 P129LS90

160 DR 11 138.0 P1211LS90

100 DR 17 93.0 P1217LS90

200 DR 9 202.0 P149LS90160 DR 11 169.0 P1411LS90

100 DR 17 114.0 P1417LS90

12" 38.3

14" 38.9

8" 24.5

10" 32.25

4" 13.5

6" 19.9

2" 7.13

3" 10.5

WeightRadius Part #

IPS SWEEP 90

Size (IPS) Pressure

Class (psi) Feed


58/110

128 DR 11 2 PED11HB225PF2

160 DR 9 3 PED9HB225PF2200 DR 7 4 PED7HB225PF2

128 DR 11 6 PED11HB225UF2

160 DR 9 7 PED9HB225UF2

200 DR 7 8 PED7HB225UF2

128 DR 11 10 PED11HB225XF2

160 DR 9 12 PED9HB225XF2

200 DR 7 17 PED7HB225XF2

80 DR 17 11 PED17HB22510F2

128 DR 11 17 PED11HB22510F2

160 DR 9 20 PED9HB22510F2

200 DR 7 26 PED7HB22510F2

80 DR 17 19 PED17HB22512F2

128 DR 11 28 PED11HB22512F2

160 DR 9 34 PED9HB22512F2

200 DR 7 45 PED7HB22512F2

80 DR 17 27 PED17HB22514F2

128 DR 11 41 PED11HB22514F2

160 DR 9 49 PED9HB22514F2

200 DR 7 61 PED7HB22514F2

80 DR 17 39 PED17HB22516F2

128 DR 11 55 PED11HB22516F2

160 DR 9 65 PED9HB22516F2

200 DR 7 81 PED7HB22516F2

80 DR 17 47 PED17HB22518F2

128 DR 11 70 PED11HB22518F2

160 DR 9 84 PED9HB22518F2

200 DR 7 104 PED7HB22518F2

80 DR 17 60 PED17HB22520F2

128 DR 11 88 PED11HB22520F2

160 DR 9 105 PED9HB22520F2

200 DR 7 130 PED7HB22520F2

80 DR 17 138 PED17HB22524F2

128 DR 11 206 PED11HB22524F2

160 DR 9 246 PED9HB22524F2

200 DR 7 304 PED7HB22524F2

24"25.800"

36 X 14 X 16 3/8

18"19.500"

27 X 8 X9 3/4

20"21.600" 30 X 8 X 10

14"

15.300" 21 X 8 X 9 3/8

16"17.400"

24 X 8 X 9 3/8

10"11.100"

17 1/4 X 6 1/2 X 7 5/8

12"13.200"

19 1/2 X 8 X 9 1/4

6"

6.900"15 1/4 X 6 X 6 5/8

8"

9.050"16 1/4 X 6 1/2 X 7 3/8

Weight per

Item (lbs)Part #

4"

4.800" 14 1/4 X 5 X 5 1/2

DIPS FAB 2 SEG. 22.5 ELBOW


Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)


59/110

128 DR 11 3 PED11HB4PF2

160 DR 9 4 PED9HB4PF2


128 DR 11 8 PED11HB4UF2

160 DR 9 9 PED9HB4UF2


128 DR 11 15 PED11HB4XF2

160 DR 9 18 PED9HB4XF2200 DR 7 20 PED7HB4XF2

80 DR 17 16 PED17HB410F2

128 DR 11 24 PED11HB410F2

160 DR 9 29 PED9HB410F2

200 DR 7 38 PED7HB410F2

80 DR 17 27 PED17HB412F2

128 DR 11 40 PED11HB412F2

160 DR 9 48 PED9HB412F2

200 DR 7 54 PED7HB412F2

80 DR 17 34 PED17HB414F2

128 DR 11 50 PED11HB414F2

160 DR 9 60 PED9HB414F2

200 DR 7 75PED7HB414F2

80 DR 17 55 PED17HB416F2

128 DR 11 82 PED11HB416F2

160 DR 9 97 PED9HB416F2

200 DR 7 114 PED7HB416F2

80 DR 17 73 PED17HB418F2

128 DR 11 108 PED11HB418F2

160 DR 9 129 PED9HB418F2

200 DR 7 148 PED7HB418F2

80 DR 17 101 PED17HB420F2

128 DR 11 128 PED11HB420F2

160 DR 9 152 PED9HB420F2

200 DR 7 189 PED7HB420F2

80 DR 17 157 PED17HB424F2

128 DR 11 195 PED11HB424F2160 DR 9 233 PED9HB424F2

128 DR 7 288 PED7HB424F2

24"25.800"

25 X 8 1/2 X15 3/8

20"21.600"

22 7/8 X 8 1/2 X14 1/2

18"19.500"

17 X 8 1/2 X14

14"

15.300" 14 7/8 x 8 1/2 x 11 5/8

16"17.400"

16 x 8 1/2 x 13 5/8

10"11.100"

12 3/4 x 6 1/2 x 10 3/4

12"13.200"

13 7/8 x 8 1/2 x 11 1/4

6"6.900"

9 1/2 x 6 x 7 3/8

8"9.050" 10 1/2 x 6 1/2 x 8 3/8

Weight per

Item (lbs)Part #

4"4.800"

6 x 5 1/2 x 6 1/2

DIPS FAB 2 SEG. 45 ELBOW


Pressure

Class (psi)

Feed

Stock

Dimension

R x C x B (in)


60/110

128 DR 11 6 PED11HB9PF3



128 DR 11 13 PED11HB9UF3



128 DR 11 24 PED11HB9XF3

160 DR 9 29 PED9HB9XF3

200 DR 7 29 PED7HB9XF380 DR 17 26 PED17HB910F3

128 DR 11 39 PED11HB910F3

160 DR 9 47 PED9HB910F3

200 DR 7 54 PED7HB910F3

80 DR 17 43 PED17HB912F3

128 DR 11 64 PED11HB912F3

160 DR 9 77 PED9HB912F3

200 DR 7 82 PED7HB912F3

80 DR 17 54 PED17HB914F3

128 DR 11 81 PED11HB914F3

160 DR 9 97 PED9HB914F3

200 DR 7 118 PED7HB914F3

80 DR 17 86 PED17HB916F3

128 DR 11 128 PED11HB916F3160 DR 9 152 PED9HB916F3

200 DR 7 169 PED7HB916F3

80 DR 17 117 PED17HB918F3

128 DR 11 174 PED11HB918F3

160 DR 9 207 PED9