harcon services ltd are a leading specialist in ... · safety eyebolt harcon services ltd are a...
TRANSCRIPT
SA
FE
TY
EY
EB
OLT
Harcon Services Ltd are a leading specialist in the design, supply,
installation and commissioning of Access Ladder systems.
With our in-house design service and technical support team we can offer
solutions to your height safety and access requirements.
Each system is designed specifically to suit your site requirements.
Window cleaning, single unit maintenance or
transition points require the minimal level of
anchorage as there is no travel required. In
these situations Harcon Services can provide
you with a wide range of Safety Eyebolts.
Safety Eyebolts positioning should always be
determined by a competent person,
following the recommendations of BS
7883:1997 clause 8 where appropriate. Our
competency ensures that your anchorages
are positioned and installed in the perfect
position to provide 100% safety through
minimised fall risk while ensuring that the
user is not hindered by the anchorage.
Our safety eyebolts for use in brick, concrete
and masonry have a 16mm diameter
unthreaded shank to ‘plug’ a drilled hole,
thus reducing the bending effects which
would result in earlier failure during shear
loading and available in mild Steel or
stainless steel construction.
This is the standard eyebolt for use in
steel, brick, concrete and masonry.
Attached using knurled sockets and
chemical resin, or with locking nuts or
locking compound and backing plates
where required suitable for the
structural material. Tested and installed
to EN 795 and BS 7883.
Supplied, designed and installed to
EN795 class A and BS7883 Standards.
Never use eyebolts, other than EN 795,
as Fall Arrest Anchor Devices – the
wrong eyebolts in the wrong situation
could prove Fatal.
For more information please contact us on:
0161 777 4230 or email [email protected]
Harcon Services Ltd,
108 Manchester
Road, Carrington,
Manchester, M31
4BD
t | 0161 777 4230
f | 0161 777 4231
Technical Information
• Material Mild Steel, Hot Dip galv, Stainless Steel
• Fixing To suit site requirements (bolt / weld / rivet / clamp)
Harcon Services offers a comprehensive selection of
Class A1 safety anchors designed to offer you the most
effective fall arrest protection for carrying out high level
window, façade cleaning or other building maintenance
operations from an ‘open window’ position. This is the
standard eyebolt for use in steel, brick, concrete and
masonry. Tested and installed to EN 795 and BS 7883.
It is important to note that the correct eyebolt to be
used to suit the material and the positioning is
determined by a competent person. (see our legislation
section).
For masonry the fixings are knurled sockets which are
affixed to the structure using a suitable chemical resin.
The eyebolt is then inserted and pull tested to confirm
the adhesion of the resin.
Key Features & Benefits
• Provides safe, a permanent anchorage for
fall arrest;
• Robust materials make them ideal for any
environment
Optional Extras
• Full Fall Protection Equipment (FPE)
• Rescue Equipment
Fixing to steel work is performed by either drilling
through the steelwork, fixing the bolt and nut with a
locking compound or locking nut (and back plate if
required) or by a competent welder. The decision of
which method is to be used is determined by the
structural integrity requirements and the competent
person on site.
All standard eyebolts are available in a wide range of
lengths to suit different requirements of structure, and
in a Galvanised, Stainless Steel or White Coating finish.