HAMMER MILL

14A75 Model12-1215 Model

The hammers, sharpened on both sides are reversible for longer life and less power requirements.

Made of high carbon steel and heat treated, they offer high resistance to abrasion and shocks.

HAMMER MILL

12-1215 14A75Horizontal discharge rigid auger 6” (15 cm) Ø 5” (13 cm) Ø

Vertical discharge rigid auger kit 6” (15 cm) Ø 5” (13 cm) Ø

Flexible discharge auger3 1/2” & 5”

(9 cm & 13 cm) Ø3 1/2” & 5”

(9 cm & 13 cm) Ø

45° auger base 6” (15 cm) Ø -

YOUR LOCAL DEALER:

Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without prior notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.

230, boulevard Industriel Saint-Germain-de-Grantham

(Quebec) J0C 1K0 Canada Phone: 819 395-4282

Fax: 819 395-2030

15497 State Hwy 131 Tomah, WI 54660

United States Phone: (608) 374-2206

Fax: (608) 374-2302

info@valmetal.com 13

C7

2-0

09

4 (0

1/2

02

0)

Strategically positioned magnets keep metal objects from entering the processing chamber.

This model can be equipped with advanced and reliable proportioners. Our patented positive drive measuring system is easy to set and maintain.

A single 1/4 HP AC motor drives all the proportioners. This is why our system always provides the most precise ration. Each measuring auger is controlled by a roller which features 25 retractable pins to properly measure each ingredient in the ration. To that, add the option of 4 different auger sizes and you have 100 possible adjustments per compartment.

SAVE MONEY BY PROCESSING YOUR OWN GRAIN.

SCREENS: • Available in different sizes to obtain the

desired texture (1/16” (2 mm) to 5/8” (16 mm) hole diameter).

• Easy to replace and service, no tools required.

Discharge augers and available accessories:

Both models have large hoppers with adjustable slides, allowing excellent flow control of grains entering into the processing chamber.

Capable of processing up to 7 ingredients in a continuous operation.

THE 14A75 HAMMER MILL

Option: Add control panels to allow autoreverse (at each start, the motor rotation is reversed) for longer longevity of the hammers.