halter loadassistant

USA

HALTER LoadAssistant®

For loading batches from 10 to 1,000 workpieces

CDN

Immediately increase profits with the right automation!The market for you, as a business in the metalworking industry, has changed

significantly in recent years. Your customers have become more demanding

than even before. They expect you to supply at competitive prices, but they

also demand smaller batch sizes and shorter delivery times. At the same

time you have to deal with rising labor costs and a lack of CNC operators. You

need these operators for skilled labor, not simple repetitive jobs.

The only way to resolve these challenges is to choose the right automation.

For small to large batch sizes this should be an automation system that is

fast to set up and easy to integrate into existing processes.

Easy loading system with short set-up times

The HALTER LoadAssistant has been developed based on HALTER CNC

Automation’s many years of experience in the metalworking industry and in

production automation.

It is a smart and sophisticated system and it does exactly what it is designed

to do: load your CNC machine with small and medium batches. The system

is very fast to set up and you don’t need any knowledge about robots to

operate it.

Would you like to immediately increase your profits like many other companies

have already done? Do you want to invest in a system that provides years of

trouble-free loading of your CNC machines, even with smaller batch sizes?

Then choose the HALTER LoadAssistant and get in touch with us today!

The hALTeR LoAdAssisTAnT

is simpLe, fuLLy configuRed,

ReAdy foR youR use And iT cAn

be connecTed To Any new oR

exisTing cnc mAchine.

meTALwoRking compAnies

invesTing in The hALTeR

LoAdAssisTAnT immediATeLy

see An incReAse in TheiR pRofiT

mARgins And in The fLexibiLiTy

of TheiR pRoducTion, even

when pRoducing smALL And

medium bATch sizes.

“Profitability of the Okuma Multus B400W is almost doubled.”Marc Meijer | BMI Thegon

2

Client

Texte tapé à la machine

Call: 514-755-7623 or email: [email protected]

Client

Texte tapé à la machine

About usHALTER CNC Automation has developed the HALTER LoadAssistant based

on over 25 years of experience in the metalworking industry. No one

understands the issues metalworking companies are struggling with better

than we do. Customers expect shorter delivery times, margins are under

pressure, and there is a growing shortage of skilled operators. Moreover,

the expensive CNC machines have an insufficient number of spindle hours.

The mission of HALTER CNC Automation is to help metalworking companies

become immediately more profitable, even in the production of batches

from 10 to 1000 workpieces, by supplying accessible automatic-loading

systems.

We are continuously working on the development, production, distribution

and service of our products. We do this with a team of specialists and in

cooperation with highly qualified suppliers and distributors. This allows our

customers to rely on our high-tech, robust and reliable automation.

Your key benefits

HALTER LoadAssistant increases your

production output, machine efficiency

and profits:

The additional machining hours at a lower cost immediately result in

higher production output and higher profitability.

One operator can operate more than one machine at the same time,

improving the utilization rate of your machine shop.

Automation lowers labor costs, as the average labor costs are 5 to 8

times higher than the average depreciation cost per hour of the robot.

The hALTeR LoAdAssisTAnT wAs

deveLoped in coopeRATion wiTh

The fAsTems gRoup. fAsTems is

The woRLd LeAdeR in The fieLd of

mAnufAcTuRing AuTomATion. iT

hAs insTALLed moRe ThAn 1,500 fms

sysTems (fLexibLe mAnufAcTuRing

sysTems) And hAs impLemenTed

moRe ThAn 350 poRTALs And 1,600

RoboTic sysTems woRLdwide.

hALTeR LoAdAssisTAnT is

pRoduced in issum, geRmAny.

Your qualified operators

are better utilized

Operators are qualified to set up and program CNC machines. Most of the time, however, they are engaged in

tedious and repetitive work. The HALTER LoadAssistant takes over this work, allowing your qualified operators to

focus on work preparation, testing, configuring other machines, and creating CNC programs. The content of their job

therefore becomes more appealing and the operators become more efficient.

You do not need robot specialists

The HALTER LoadAssistant can easily be set up and operated by any employee. No robotics training is required

thanks to the HALTER SmartControl combined with the well-thought-out loading solution.

It increases flexibility as it can be used with several

of your CNC machines

The HALTER LoadAssistant can easily be moved with a pallet truck and connected to other CNC machine in your

shop. By investing in one loading robot you can automate several machines, allowing you to respond to the

demand of your customers in a more flexible way. You can use the HALTER Universal with a lathe as well as with a

milling machine.

1

2

4

3

Payback period: 6-18 months

Total benefits

Investment

Payback period

“After all the alternatives had been carefully studied, the choice was made for the HALTER LoadAssistant.”Rolf Würstlin | ASS Maschinenbau

4 5

THE EASy wAy To AUTomATE yoUR CNC mACHINE

• No robotics experience required

• Set-up ready in 12 steps

• Very flexible: add additional cycles yourself

• Change-over takes less than 5 minutes

• Maximum load capacity of robot arm: 10 kg (22lbs), 20 kg

(44lbs) or 35 kg (77lbs)

• Suitable for industrial environments

• Stable, accurate and sustainable

HALTER SmartControl Fanuc 6-axis robot arm

• Movable with a pallet truck

• Positioning facilitated by the self-centering anchors

• Automatic identification of the CNC machine

• Thanks to the rotating loading system, a new batch

can be filled from the backside while the production

process is running.

• CNC machine remains accessible by the operator at all times, no fences necessary

• Equipped with floor scanner to slow down and stop the robot arm

• Does not compromise the safety of your operator

• Rigid construction

• Only A-class industrial components

• Standard and complete plug-and-play system

UnIversal:

• Universal, pre-programmed grid plates

• For lathes and/or milling machines up to 9.055”

• Grid-plates are adjustable in height for workpieces up to 9.843”

• New batches can be set up while the robot arm is working

S-180:

• Stacking stations for milling workpieces up to 7.087”

• High capacity on a small surface area (for shorter workpieces)

• Workpiece turn-around station for two-sided machining

S-230:

• Stacking stations for turning workpieces up to 9.055”

• High capacity with a small surface area (for shorter workpieces)

• Workpiece turn-around station for two-sided machining

• Universal 2 or 3-finger grippers

• Quickly adjustable grippers

• Built-in safety sensors for open/close control

• Airblow system that cleans off the vice or chuck

Rotating loading system optimal gripper system

Easy to move and switch to another CNC machine

Setting up a new batch while the robot continues to operate

Accessible and safe

High-quality industrial components and reliable technology

1 5

3

7

4

8

2 6

1 2

3

4

5

6

7

8

COMPACT ALL-IN-ONE DESIGN

NO ADDITIONAL COMPONENTS, FENCES OR CABLES NECESSARY

ROTATING SYSTEM ALLOWS FILLING FROM THE BACkSIDE

MINIMAL USAGE OF FLOOR SPACE, INCLUDING THE SAFETY zONE

6 7

8 9

HALTER SmartControl

Intuitive and graphical programming in 12 steps

Rotating panel with 15” touch screen

Choice between inside and outside gripping

Gripping with or without pressure star

Possibility to work with spindle orientation

Eccentric loading and unloading

Adding of free programmable cycles

Standard cycles can be extended with extra functionalities

Adjustable distance of the airblow system

Software analysis for machine utilization

Automatic program storage

Input can be entered in inches or mm

Automatic back-up of robot programs or manual back up to USB

Robot arm can be parked with the Park Position button

Free choice of pre-installed language

Can be connected to up to 4 machines

Intuitive, graphics-based programming in 12 steps

Standard loading cycles that can be flexibly extended with additional functions

The HALTER SmartControl features intuitive

software, so the operator does not need any

knowledge of robot programming. All positions and

all possible variables have been pre-programmed

into the HALTER LoadAssistant by means of a

grid plate (for the Universal) or a stacking system

(for the S-180 and S-230). This means that the

operator only needs to enter the workpiece data

(e.g., the diameter and height) and the robotic arm

will know, based on this data, the exact position of

the workpiece. The data of the CNC machine (such

as the vice or chuck) are set so that the HALTER

LoadAssistant can immediately start the automatic

loading of the machine. Thanks to the HALTER

SmartControl, the changeover times are minimized

and the HALTER LoadAssistant can even be used for

smaller batches.

The HALTER LoadAssistant works with multiple standard

loading cycles, which can be selected with one click.

Thus you do not need to program anything because the

robot arm upon installation is taught exactly where the

vise or chuck is. For example, there are standard cycles

for the loading and unloading of CNC machines with

one spindle, two spindles, a multitasking lathe center or

for the unloading of a sub-spindle in combination with a

bar feeder.

In addition, you also have the option to extend any

standard cycle with additional functionalities. For

example, the workpieces can be placed on a measuring

station, engraving machine, production line or pallet.

Therefore you retain the advantage of short changeover

times through the use of standard cycles, but you also

have optimal flexibility when it comes to adding extra

features.

The HALTER SmartControl is equipped with software that precisely informs you about the productivity

of the HALTER LoadAssistant and thus of course your CNC machine. This will provide you with handy

analysis of your actual machine utilization.

The HALTER LoadAssistant is easy to move with a pallet truck. Thanks to the self-centering anchors, the HALTER

LoadAssistant always stays at a fixed reference position. You can use one system for multiple machines (up to 4).

The robot-machine interface only needs to be established once and then the HALTER SmartControl retains all relevant

machine data and can be started immediately. Based on the experience of our customers, the total time required to

move the HALTER LoadAssistant and begin production with another CNC machine is less than 30 minutes.

“hALTeR’s moRe ThAn 25 yeARs

of expeRience And ouR cLose

ReLATionship wiTh The cnc end-

useR mARkeT hAs inspiRed us To

pRove ThAT AuTomATion ALwAys

pAys!”

Why choose theHALTER LoadAssistant®

HALTER SmartControl – no robotics experience required

Minimal set-up times, therefore also very suitable for small batch sizes

Robot can continue operating while setting up a new workpiece

Design based on 25 years of experience in the metalworking industry

and production automation

Minimal usage of floor space, including safety zone

One HALTER LoadAssistant for several CNC machines

Your CNC machine remains fully accessible

Compact all-in-one design; no additional components,

fences or cables necessary

Provides your operators with the highest level of safety

Best possible service by certified technicians

Important services for our customers

Short delivery time from the production facility in Germany

Turnkey delivery, set-up and training

Top service by HALTER-certified technicians

Favorable financing conditions thanks to the short payback period

“My operators can work with the Halter; no robot knowledgeis required at all.’’Randy Decker | Decker Precision Machining

11

Safety zone, robot arm reach and dimensions

s e r v i c e p a r t n e r

How it worksHow exactly does the HALTER LoadAssistant

work? Please visit our website for a short video

explanation.

ReferencesThe HALTER LoadAssistant can be connected to any new

or existing CNC machine. On our website you will find

short videos showing recent installations.

With the HALTER, the machines of the following

brands already operate more efficiently:

Akira Seiki, Bridgeport Hardinge, DMG Mori, Doosan,

Eumach, Haas, Hermle, Hurco, HwaCheon, kitamura,

MAS, Mazak, Mikron, Mori Seiki, Nakamura, Okuma,

Quaser, Takisawa, Victor and others.

Installation and instructionThe HALTER LoadAssistant is delivered turnkey. It is important to know

that your CNC machine does not necessarily need to be equipped with

a so-called ‘robot interface’ from your machine supplier. Our certified

technicians make the connection between your CNC machine and the

HALTER LoadAssistant through a PLC. Thanks to the standardized HALTER

interface protocol, our installation can result in significant cost savings for

you.

Your CNC machine needs to be equipped with an automatic door opener to

be able to work with the HALTER LoadAssistant. In case your CNC machine

doesn’t have a door opener, we can build it in for you.

The operator training session takes place immediately after the

installation. Our technicians ensure that after the training, your operator is

able to work independently with the HALTER LoadAssistant.

ServiceThe international network of certified service partners of HALTER CNC

Automation guarantees high-quality service for each system supplied.

Through training and annual certification of our service partners, we keep

our service level high, enabling you to operate a reliable system for many

years.

ouR heLpdesk is AccessibLe

To ALL useRs of The hALTeR

LoAdAssisTAnT.

iT is impoRTAnT To know ThAT

youR cnc mAchine does

noT necessARiLy need To be

equipped wiTh A so-cALLed

‘RoboT inTeRfAce’ fRom

youR mAchine suppLieR. ouR

ceRTified TechniciAns mAke

The connecTion beTween youR

cnc mAchine And The hALTeR

LoAdAssisTAnT ThRough The

sTAndARdized hALTeR inTeRfAce

pRoTocoL.

12 13

Technical specificationsCapacity

HALTER LoAdASSISTANT UNIvERSAL 10 / 20 / 35 CAPACITy

HALTER LoAdASSISTANT S-180 20 / 35 CAPACITy

HALTER LoAdASSISTANT S-230 20 / 35 CAPACITy

SySTEm UNIvERSAL 10 / 20 / 35 S-180 20 / 35 S-230 20 / 35

Rigid industrial construction

Rotating loading table

Full enclosure and protection

Simple to move with pallet truck

Can be placed on 3-point self-centering anchors

Fanuc 6-axis robot arm 10 / 20 / 35 kg 20 / 35 kg 20 / 35 kg

Drip tray for leaking coolant

Workpiece turn-around station for two-sided machining

Standard robot-machine interface for every CNC machine

HALTER SmARTCoNTRoL UNIvERSAL 10 / 20 / 35 S-180 20 / 35 S-230 20 / 35

Intuitive and graphical programming in 12 steps

Rotating panel with 15″ touch screen

Choice between inside and outside gripping

Gripping with or without pressure star

Possibility to work with spindle orientation

Eccentric loading and unloading

Adding of free programmable cycles

Standard cycles can be extended with extra functionalities

Adjustable distance of the airblow system

Software analysis for machine utilization

Automatic program storage

Input can be entered in inches or mm

Robot arm can be parked with the Park Position button

Free choice of pre-installed language

Max. number of CNC machines to connect with 4 4 4

GRIPPERS UNIvERSAL 10 / 20 / 35 S-180 20 / 35 S-230 20 / 35

2-finger gripper for rectangular workpieces Optional -

3-finger gripper for round workpieces Optional -

Separate grippers for raw and machined workpieces

Standard airblow system on all grippers

Workpiece detection system by open/close message

Quick change system for exchanging grippers

Quickly adjustable gripper fingers

Pressure sensor on the robot arm monitors air pressure

SAFETy UNIvERSAL 10 / 20 / 35 S-180 20 / 35 S-230 20 / 35

In-machine-space function

Fanuc DCS area in combination with the Sick floor scanner

Sliding door provided with safety sensors

Standard safety fence between CNC machine and the Halter

Closed safety circuit

Automatic servo-driven door opener with integrated safety

dImENSIoNS ANd INPUT UNIvERSAL 10 / 20 / 35 S-180 20 / 35 S-230 20 / 35

Length x Width 68.898” x 56.457” 68.898” x 56.457” 68.898” x 56.457”

Height 87.402” 87.402” 87.402”

Total weight 2182 / 2447 /2469 lbs 2667 / 2689 lbs 2667 / 2689 lbs

Voltage 208 3 Phase 208 3 Phase 208 3 Phase

Peak consumption 30 A 30 A 30 A

Compressed air pressure 87 PSI 87 PSI 87 PSI

Workpiece diameter (min-max) .394” - 9.055”

Minimum workpiece (L x W) .394” x .394”

Maximum workpiece (L x W) 9.055” x 9.055”

Maximum height of workpiece 9.843”

Maximum load capacity robot arm 22 lbs / 44 lbs / 77 lbs

Maximum total weight on rotating table 551 lbs / 1653 lbs

Max. number of workpieces for grid plate 10-35 mm 176







Minimum workpiece (L x W) 1.575” x 1.575”

Maximum workpiece (L x W) 7.087” x 7.087”


Maximum load capacity robot arm 44 lbs / 77 lbs

Maximum total weight on rotating table 2755 lbs

Maximum stacking height 13.779”

Number of stacking stations (1 empty) 12

Maximum weight per station 253 lbs

Max. number of workpieces at workpiece height of 0.394” 385






Workpiece diameter (min-max) 1.692” - 9.055”


Maximum load capacity of robot arm 44 lbs / 77 lbs

Maximum total weight on rotating table 2755 lbs

Maximum stacking height 13.779”

Number of stacking stations (1 empty) 12

Maximum weight per station 253 lbs







14 15

HALTER CNC Robotics LLC

129 Fox St. SE, Suite 20

Cascade, IA 52033

United States of America

Feel free to contact us directly for more information!

T 800-314-8261

E [email protected]

I www.haltercncautomation.com Made in Germany Developing partner: Fastems

Halter tecHnology centerUSa

HeadqUarterSHalter cnc aUtomation b.v.

Halter tecHnology center eUrope @faStemS SyStemS

800-314-8261129 Fox Street SE, Suite 20 Cascade, Iowa 52033USA

+31 (0)88 015 74 00Databankweg 6a3821 AL AmersfoortThe Netherlands

+31 (0)88 015 74 00 Gewerbering 57661 Issum Germany

Dealer:

JM CNC inc 198 rue Fontaine Saint-Jean-sur-Richelieu, QC J2Y 1G7

[email protected] WWW.JMCNC.CO Phone: 514-755-7623

halter loadassistant

Documents