h3c s3100-si シリーズ イーサネットスイッチ コマンド · pdf...
TRANSCRIPT
H3C S3100-SI
Hangzhou H3C Technology Co., Ltd.
http://www.h3c.com
Manual Version: T2-08193L-20070604-C-1.01
Product Version: Release 2102P01
Copyright 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
Hangzhou H3C Technology Co., Ltd
H3CAolynk IRFH3Care
Neocean TOP GSecEngine SecPathCOMWAREVVGV2GVnGPSPTNetPilot XGbus Hangzhou H3C Technology Co., Ltd
http://www.h3c.com
http://www.h3c.com
H3C S3100-SI
H3C S3100-SI
H3C S3100-SI
H3C
Part
1 CLI
2
3 VLAN VLAN Voice VLAN
4 VLAN VLAN DHCP/BOOTP
5 GVRP GVRP
6
7
8
MAC
MAC
10 MSTP STP
Part
11 802.1x 802.1x
12 AAA-RADIUS-HWTACACS
AAA RADIUS
13 MAC MAC
14 ARP ARP
15 DHCP DHCP
16 ACL ACL
17 QoS QoS
18 IGMP IGMP
19
20 SNMP SNMP
21 RMON RMON
22 NTP NTP
23 SSH SSH2.0
24
25 FTP TFTP FTP/TFTP
26
27
28
I.
[ ] ()
{ x | y | ... } 1
[ x | y | ... ] 1
{ x | y | ... } * 1
[ x | y | ... ] *
# #
II. GUI
< > :
[ ]
: []
/ : [//]
III.
CLI H3C S3100-SI
i
1 ..................................................................................... 1-1 1.1 .................................................................................... 1-1
1.1.1 command-privilege level ......................................................................................... 1-1 1.1.2 display history-command ........................................................................................ 1-2 1.1.3 super ....................................................................................................................... 1-2 1.1.4 super password....................................................................................................... 1-3
CLI H3C S3100-SI 1
1-1
1
1.1
1.1.1 command-privilege level
command-privilege level level view view command
undo command-privilege view view command
System view
level: 0 3
view:
command:
command-privilege level
undo command-privilege view
4 visitmonitorsystemmanage 0123
pingtracerttelnet visit ( 0)display debugging monitor ( 1)configuration system ( 2)FTP/TFTP/XModem manage ( 3)
# interface 0
system-view
System View: return to User View with Ctrl+Z.
[H3C] command-privilege level 0 view system interface
CLI H3C S3100-SI 1
1-2
1.1.2 display history-command
display history-command
View
display history-command history history history history
: history-command max-size.
# history
display history-command
system-view
quit
display history-command
1.1.3 super
super [ level ]
View
User view
level: 0 3 3 level 3
super level super password [ level level ] { simple | cipher } password
CLI H3C S3100-SI 1
1-3
4 1
super password [ level level ] { simple | cipher } password AUX AUX AUX
VTY super password [ level level ] { simple | cipher } password VTY Password is not set ()
AUX VTY
: super password.
# 3
super 3
Password:
1.1.4 super password
super password [ level level ] { simple | cipher } password
undo super password [ level level ]
View
System view
level: 1 3 3 level 3
simple:
CLI H3C S3100-SI 1
1-4
cipher:
password: simple cipher 2 1 16 123 24 7-CZB#/YX]KQ=^Q`MAF4
Login H3C S3100-SI
i
1 ..................................................................................... 1-1 1.1 .................................................................................... 1-1
1.1.1 authentication-mode................................................................................................ 1-1 1.1.2 auto-execute command........................................................................................... 1-2 1.1.3 databits.................................................................................................................... 1-3 1.1.4 display user-interface .............................................................................................. 1-3 1.1.5 display users ........................................................................................................... 1-5 1.1.6 free user-interface ................................................................................................... 1-5 1.1.7 header ..................................................................................................................... 1-6 1.1.8 history-command max-size ..................................................................................... 1-8 1.1.9 idle-timeout.............................................................................................................. 1-9 1.1.10 ip http shutdown .................................................................................................. 1-10 1.1.11 lock ...................................................................................................................... 1-11 1.1.12 parity.................................................................................................................... 1-11 1.1.13 protocol inbound.................................................................................................. 1-12 1.1.14 screen-length....................................................................................................... 1-13 1.1.15 send..................................................................................................................... 1-14 1.1.16 service-type......................................................................................................... 1-15 1.1.17 set authentication password................................................................................ 1-16 1.1.18 shell ..................................................................................................................... 1-18 1.1.19 speed................................................................................................................... 1-18 1.1.20 stopbits ................................................................................................................ 1-19 1.1.21 sysname.............................................................................................................. 1-20 1.1.22 telnet.................................................................................................................... 1-20 1.1.23 user-interface ...................................................................................................... 1-21 1.1.24 user privilege level .............................................................................................. 1-22
2 ........................................................................................... 2-1 2.1 .......................................................................................... 2-1
2.1.1 acl............................................................................................................................ 2-1 2.1.2 free web-users......................................................................................................... 2-2 2.1.3 ip http acl ................................................................................................................. 2-2 2.1.4 snmp-agent community........................................................................................... 2-3 2.1.5 snmp-agent group ................................................................................................... 2-4 2.1.6 snmp-agent usm-user ............................................................................................. 2-5
Login H3C S3100-SI 1
1-1
1
1.1
1.1.1 authentication-mode
authentication-mode { password | scheme [ command-authorization ] | none }
User interface view
password:
scheme:
command-authorization: TACACS
none:
authentication-mode
password set authentication password { cipher | simple } password
scheme AAA & RADIUS
command-authorization TACACS TACACS
VTY Telnet
# AUX
system-view
Login H3C S3100-SI 1
1-2
System View: return to User View with Ctrl+Z.
[H3C] user-interface aux0
[H3C-ui-aux0] authentication-mode password
1.1.2 auto-execute command
auto-execute command text
undo auto-execute command
User interface view
text:
auto-execute command
undo auto-execute command
telnet Telnet
:
auto-execute command
auto-execute command
# VTY 0 telnet 10.110.100.1
system-view
System View: return to User View with Ctrl+Z.
Login H3C S3100-SI 1
1-3
[H3C] user-interface vty0
[H3C-ui-vty0] auto-execute command telnet 10.110.100.1
1.1.3 databits
databits { 7 | 8 }
undo databits
User interface view
7: 7
8: 8