gyroscopic testing of accelerometers
TRANSCRIPT
).J EMORANDUM REPO)W.1' IRL IL-MR -3709
1938 - Serving the Army for Fifty Years - 1988
GYROSCOPIC TESTING OF ACCELEROMETERSTO DETERMINE CONING ANGLE
NINA MISIIRAJONATHAN A. HARRISON
DAVID J. HIEPNER
NOVEMIBER 19,88
~ELECTFE
&NOV 0 219880Cc=
APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED.
U.S. ARMY LABORATORY COMMAND
BALLISTIC RESEARCH LABORATORY
ABERDEEN PROVING GROUND, MARYLAND
UNCLASSIFIEDSECURITY CLASSIFICATION OF THIS PAGE
Form ApprovedREPORT DOCUMENTATION PAGE OMBNo. 070"188
la. REPORT SECURITY CLASSIFICATION lb. RESTRICTIVE MARKINGSMKIASSIFIED
1a. SECURITY CLASSIFICATION AUTHORITY 3. DISTRIBUTION/AVAILABILITY OF REPORT
Approved for public release;Zb. DECLASSIFICATION / DOWNGRADING SCREDULE distribution is unlimited.
4. PERFORMING ORGANIZATION REPORT NUMBER(S) S. MONITORING ORGANIZATION REPORT NUMBER(S)ERL-MR-3709
61. NAME OF PERFORMING ORGANIZATION 6b. OFFICE SYMBOL 7a. NAME OF MONITORING ORGANIZATIONU. S. Army (if aplcable)Ballistic Research Laboratory SLCBR-LF
6c. ADDRESS (City, State, and ZIP Code) 7b. ADDRESS (City, State, and ZIP Code)
Aberdeen Proving Ground, MD 21005-5066
Ba. NAME OF FUNDING/SPONSORING Bb. OFFICE SYMBOL 9. PROCUREMENT INSTRUMENT IDENTIFICATION NUMBERORGANIZATION U. S.• Army I f apicable)
Ballistic Research Laborator SIBR-DD-T_Sc. ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS
PROGRAM PROJECT TASK WORK UNITAberdeen Proving Ground, MD 21005-5066 ELEMENT NO. NO. 1L1 NO. ACCESSION NO._______________________________ 62618A 16261 BAH80 I
11. TITLE (include Security Caification)
( rroscopic Testing of Accelerometers to Determine Coning Angle (U)
12. PERSONAL AUTHOR(S)Mishra, Nina; Harrison, Jonathan A.; and Hepner, David J.
13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year, Month, Day) 15. PAGE COUNTt-Imorarx Rept FROM _ TO 1988 Au ust 23
16. SUPPLEMENTARY NOTATION
17. COSATI CODES 18. SUBJECT TERMS SContinue on reverse if necessary and identify by block number)FIELD GROUP SUB-GROUP G yroscope; L *i 1 S- 503;
01 01 1 /Yawsonde' ,/ Accelercimters ,,19. ABSTRACT (Continue on revrse ifnecessary and identify by block number)'/
An experiment was performed to determine how accurately accelerometers could measure theconing angle of a spinning and coning laboratory gyroscope. Tests showed that coning anglemeasurements were well within expected results. The accelerometer can be used with or inplace of the yawsonde. for determination of flight stability of spin-stabilized projectiles.
20. OISTRIBUTION/AVAILABILITY OF ABSTRACT 21. ABSTRACT SECURITY CLASSIFICATION03 UNCLASSIFIED/UNLIMITED 0 SAME AS RPT. 0 DTIC USERS IUNASSIFIED
22a. NAME OF RESPONSIBLE INDIVIDUAL 22b TELEPHONE (include Area Code) 22c. OFFICE SYMBOLDavid J. Hepner (301)-278-4103 SLCBR-LF-A
DD Form 1473, JUN 86 Previouseditionsare obsolete. SECURITY CLASSIFICATION OF THIS PAGE
UNCLASSIFIED
V-
Table of ContentsPage
List of Figures .. .. ... ... ... ... ... ... .... ... ... .... v
I.Introduction .. .. .. .. ... ... ... .... ... ... ... ... ..... 1
II. Description of the Experiment .. .. .. .. ... ... .... ... ... .....
1. Physical Setup. .. .. ... ... ... .... ... ... ... ... .... 1
2. Constraints .. .. .. ... ... .... ... ... ... ... .... .... 2
3. Geometrical Interpretation .. .. .. .. ... ... .... ... ... .... 2
III. Output .. .. ... ... ... ... ... .... ... ... ... .... .... 3
IV. Discussion. .. .. .. ... ... ... ... .... ... ... ... ... .... 3
V. Conclusion and Recommendations. .. .. ... ... ... .... ... .... 4
References .. .. .. .. ... .... ... ... ... ... .... ... ..... 15
List of Symbols .. .. .. ... ... ... ... ... ... .... ... ..... 17
Appendix. .. .. ... ... ... ... ... .... ... ... ... ... .. 19
Distribution List...... ..... . . ... . ... .. .. .. .. .. .. .. .. .. .1
Accession For_-
NTIS GRA&IDTIC TABUnannounced [Do'Justiffication.l-_
ByDistribution/____
Availability Codes
Aval'i and/or
D~st Opecial
List of FiguresFigure Page
1 Sigma N versus time for DPG B94 M825 PIP for low QE and transoniclaunch with yaw induction .................................. 6
2 Phi dot versus time for DPG B94 M825 PIP for low QE and transonic launchwith yaw induction ........ ................................ 7
3 Fast mode yaw demodulation of DPG B94 (0.5-7.5 s.) ................. 8
4 Forced precession gyroscope apparatus .......................... 9
5 Location of accelerometer in cylinder ...... ...................... 10
6 Predetermined coning angle plate ...... ........................ 11
7 Block diagram of setup ....... .............................. 12
8 Acceleration components at I it, max .......................... 13
9 Spectral display for a = 1.970, p = 19.86 Hz, € = 8.23 Hz ............. 14
tV
I. Introduction
Accelerometer usage at the Ballistic Research Laboratory ranges from measuring in-bore projectile accelerations' to monitoring relative phase between liquid oscillations andcylinder positions in a three-degree-of-freedom flight simulator.2 An interesting applicationwas made by the Raytheon Company when they mounted an accelerometer off the cen-tral axis of a Carco table (gyroscope) and calculated components of acceleration throughrigorous mathematical techniques. 3
However, in-flight measurements of fast and slow precession for spin-stabilized projec-tiles currently include only yawsonde data to track yaw and spin histories. 4 The yawsondeis basically used to determine if the yaw is growing. Yawsondes employ two optical sensorsto determine the motion of the projectile with respect to the sun. The data are telemeteredto a ground station. The raw yawsonde data are a series of pulses (positive and negative)that measure times at which the optical sensors are aligned with the sun. These datayield a solar aspect angle (Sigma-N) (Figure 1) and the Eulerian roll rate of the projectile(Phi-Dot) (Figure 2).5 The yawsonde is restricted to use during nearly cloudless weatherand also has limitations on the relative position of the sun and on firing azimuth and QE.
The yawsonde gives a planar representation of the yawing motion about the trajectory.Although this representation is planar, the projectile is at an angle of attack roughly equalto the sum of the peak magnitudes of the fast and slow motion. By filtering the trajectoryand slow mode, the fast mode planar representation can be obtained (dotted line, Figure3). The demodulation of this motion is representative of the fast mode amplitude (solidline, Figure 3). Other yawsonde data have been reduced by this method and display fastmode damping with yaw induction, negligible fast mode motion, and slow mode damping.
To supplement the yawsonde data, an on-board accelerometer could also provideinsight into projectile flight characteristics. An accelerometer might be used to determinespin rates, yaw rates, and amplitudes of motions. In addition, acceleration data could becollected in any kind of lighting or firing conditions.
II. Description of the Experiment
To show that this method has the potential to supplement the yawsonde, simplemathematical derivations and laboratory experiments were carried out to see if the angleof attack could be correctly verified in a laboratory gyroscope.
1. Physical Setup
The mechanical portion of this project involved the mounting of a sensitive, crystal.AC accelerometer (see Appendix) in the canister of a gyroscope (Figure 4).6 The axis ofthe accelerometer was centered perpendicular to the vertical axis of the canister 14.6 cm(53 in) above the pivot center (Figure 5). A dense sponge material with a small cavity tohold the accelerometer was used to mount the device in the top of the cylinder. The coning
plate, located at the bottom of the apparatus, predetermined the coning angle (Figure 6).In addition, a slip ring at the top of the gyroscope enabled the accelerometer signal to beconnected to a signal analyzer. This signal analyzer provided an ICP current through thesesame two input and output lines to power the accelerometer (Figure 7). The gyroscopewas equipped with two optical sensors. One measured the inertial spin and the other theinertial coning of the gyroscope. Two frequency counters provided a visual output of eachfrequency. The spin was limited to 30 Hz and the coning was limited to 13 Hz to avoidfixture vibrations.
2. Constraints
Figure 8 represents the geometric configuration u. ,he accelerometer in the gyroscope.This representation is only useful for earth-fixed, single-mode, coning motion where theaccelerometer is placed on the spin axis with the sensitive axis oriented perpendicular tothe long axis of the projectile (1). It does not include components for off-axis accelerometerplacement, epicyclic motion, or coriolis forces. In essence, only centripetal acceleration isunder consideration.
3. Geometrical Interpretation
The following three basic equations are used:
I', - 1- r(27r ,) 2 (1)
d t=1 I cosa (2)
a = sin- 1 (3)
where:
I = magnitude of maximum acceleration along sensitive axisof accelerometer
I d I = magnitude of maximum acceleration along rr = radius of circular motion of accelerometera = coning angleSl = length from the accelerometer to the gimbal axis
= earth-fixed inertial coning rate (Hz)
Raw voltage output is converted to I , I by:
2
Im I= (g)( / )(s) (4)cal
where:
cal = calibration of accelerometer (milli-volts/g)
S = accelerometer output (rms milli-volts)g = gravitational conversion factor
Eq. (3) is then solved in terms of the coning rate and measured acceleration:
(k= Li~n (5)2 . ((2)(I)7r 1)2) 5
III. Output
Most spin-stabilized projectiles have the spin and yaw rotations in the same directionalsense (prograde motion). Since the accelerometer is on the spinning frame, responses fromthe accelerometer for circular, single-mode, prograde motion occur at a frequency:
f (6)
where:
p = earth-fixed inertial spin rate (Hz)f = frequency of response with respect to body-fixed frame (Hz)
The typical spectrum output of the accelerometer is shown in Figure 9. The responseoccurs at the expected f = p - €1 = 11.63 Hz. The amplitude of this response representsthe peak acceleration in mVrms resulting from the sensitive axis aligned toward the centerof rotation (along r, Figure 4).
IV. Discussion
Table 1 represents data from six spin and coning sets at a constant coning angle of1.97 ° . The estimated error for this angle is 0.10%. This angle was mechanically measuredusing a cathometer and dial indicators.
3
Table 1. Data with 1.97 ° Coning Plate.
Counter readings Analyzer readings
P ~ i P- f S if.. rc0ie acak.(Hz) (Hz) (Hz) (Hz) (mVrrns) (m/s2) (m) (deg)
29.1 10.0 19.13 19.13 142.1 19.5 0.0050 1.9628.8 8.3 20.50 20.75 98.3 13.5 0.0050 1.9526.04 10.8 15.24 15.13 175.0 24.0 0.0052 2.0519.86 8.2 11.63 11.63 98.7 13.6 0.0051 1.9917.64 12.6 5.05 5.13 240.7 33.1 0.0053 2.0813.55 9.3 4.25 4.25 125.2 17.2 0.0050 1.98
The differences between the coning plate angle and acute give a probable error of 2%.There are three sources of inaccuracy in the mechanical setup of the accelerometer. First.the accelerometer was not rigidly fixed within the cavity. Any unrestrained movement ofthe acclerometer within the cavity causes variations in the output. Second, the verticalheight (1) was measured with a straight edge. And third, the manufacturer's precisionin the calibration was not completely correct. It is expected that a more stable andmeasurable mount would provide more accurate results. Table 2 shows the uncertainty ineach term.
Table 2. Uncertainty in Variables.Variable Uncertainty
cal - 1 mV/g
1 + 0.508 cmS 4.1.0 mVrrns_ _ 4. ±0.2 Hz
The uncertainties in the elements listed in Table 2 combine in the propogation of errortechnique to determine an uncertainty in acajc of 6%. Thus the true error in 0 calc isestimated to be between 2 and 6%. The propogation of error also shows that the estimatederror of 6%, in the present experiment, can be significantly reduced by a more accurate
determination of j and 1.
V. Conclusion and Recommendations
The experiment showed that using simple geometrical principles, accelerometers canaccurately measure the coning angle on a gyroscope. In this laboratory experiment, theaccelerometer can measure the coning angle to within 6% of its actual value. The inaccu-racies that were generated in the setup may not occur when the accelerometer is actuallymounted on a more suitable fixture. The Ballistic Flight Simulator can be used to pro-vide complex motions required for more advanced laboratory testing. Experience must begained in determining which method is better for finding fast and slow mode rates found
4
in actual flight cases. Flight testing of the device may be required to determine addi-tional problems with the measurement technique, including launch failure or calibrationvariation, effects of coriolis and dynamic range of instrumentation required to effectivelyyield both fast and slow mode rates and a wide range in yaw amplitudes. This method ofmeasuring yaw rates and amplitudes has the potential to be used in conjunction with orin place of the yawsonde.
5
c-
L
co
0-
-D
C))
C D
-Ct C
o 0 J "
CD
C-D
a-.
009 00 0O0 00 0"0,- 00 - 0,09-(6e0) N-ow6 1,S
6
L
00 C0
CD
Ll~
C-D C 0
co Ln
m -u
CD (CD
0
a)z
(D3A~) 40 -Y
7C
CD
co
-U
r-r
I.:)
0*09 OO0 OO0 0*0 OO0 - OG0- 0*09-(6aQl J'JoVnfpowao mo k .pOw4so]
8
CYLINDER CONING AXIS- 0 CYLINDER ROTATION AXIS
SLIP RING ASSEMBLY
PIOTCINDNGE
CSNIN
- i1/5 H P
Figue 4.Fored pecesiongyrScPN parts
MOO
COIN ANL
RIGID MATERIAL ACCELEROMETERTOP INSERT(ALUMINUM)
CYLINDER
(LUCITE)
PIVOT AXIS
BOTTOMINSERT(ALUMINUM)
Figure 5. Location of accelerometer in cylinder.
10
EARINGSHAFT FROM GIMBAL CAGE
CYLINDER CONING AXIS - CYLINDER ROTATING AXIS
I iFigure 6. Predetermined coning angle plate.
il
LABORATORY FRAME BODY-FIXED FRAM'E
SPECTRUM RN
ANALYZERACCELEROMETER
COIGNTRO
(CONING)CONING SEOTOR
SPNING CONTROL
COING MOTOR
Figure T. Block diagram of setuip.
12
ym
x
z PIVOT AXIS
Figure 8. Acceleration components at max.
13
0
* .° . .. * *
II
..........
14D
000
L -~
14|
References
1. Evans, J.W.,"In-Bore Measurement of Projectile Acceleration and Base Pressure Us-ing an S-Band Telemetry System," BRL-MR-2562, US Army Ballistic Research Lab-oratory, Aberdeen Proving Ground, Maryland, December 1975. (ADBOO8421L).
2. Hepner, D.J.,"Pressure Measurements in a Liquid-Filled Cylinder Using a Three De-gree of Freedom Flight Simulator," BRL-MR-3560, US Army Ballistic Research Lab-oratory, Aberdeen Proving Ground, Maryland, December 1986. (ADA177872).
3. Raytheon Company, "Coriolis Oscillator Roll Reference for the Spin Stabilized GuidedProjectile," April 1984.
4. Mermagen, W.H.,"Measurements of the Dynamical Behavior of Projectiles Over LongFlight Paths," BRL-MR-2079, US Army Ballistic Research Laboratory, AberdeenProving Ground Maryland, November 1970. (AD717002).
5. Clay, W.H., Mermagen, W.H., "The Portable Yaw Processor," BRL-MR-2785, USArmy Ballistic Research Laboratory, Aberdeen Proving Ground, Maryland, September1977. (ADB0221041).
6. Hepner, D.J., Soencksen K.P., Davis, B.S., Maiorana, N.G., "Internal Pressure Mea-surements for a Liquid Payload at Low Reynolds Numbers," BRL-MR-3674, US ArmyBallistic Research Laboratory, Aberdeen Proving Ground, Maryland, June 1988.
15
List of Symbols
[ f maximum magnitude of acceleration along sensitive axis
of accelerometer
I fir maximum magnitude of acceleration alongr
cal calibration of accelerometer
f frequency of response with respect to body-fixed frame
I length from the accelerometer to the gimbal axis
p earth-fixed inertial spin rate
r radius of circular motion of accelerometer
S accelerometer output
a coning angle
earth-fixed inertial coning rate
17
AppendixCalibration Data for Accelerometer
19
.x'l inI
&~ + 3
LMcc cu-n LM IM.
- '1-
cr ISL. C E I v -
r\ L c c S 'H
cc0 M
Ln L
L, >
WNI
to li
c- LM
~VA - m I HIA w N~
L -L
'I ~ 20
DISTRIBUTION LIST
No. No.Copies Organization Copies Organization
2 Administrator 4 CommanderDefense Technical U.S. ARDEC
Information Center US Army AMCCOMATTN: DTIC-FDAC ATTN: SMCAR-AET-ACameron Station, Bldg. 5 Mr. H. HudginsAlexandria, VA 22304-6145 ATTN: SMCAR-LCU-SI
Mr. F. BrodyCommander Mr. S. HarnettUS Army Materiel Command Picatinny Arsenal, NJ 07806-5000ATTN: AMCDRA-ST5001 Eisenhower Avenue 1 HQDAAlexandria, VA 22333-0001 DAMA-ART-M
Washington, DC 20310CommanderUS Army ARDEC 1 CommanderATTN: SMCAR-TDC U.S. AMCCOM ARDEC CCACPicatinny Arsenal, NJ 07806-5000 Benet Weapons Laboratory
ATTN: SMCAR-CCB-TLCommander Watervliet, NY 12189-4050U.S. ARDECUS Army AMCCOM 1 CommanderATTN: SMCAR-MSI U.S. Army Armament. MunitionsPicatinny Arsenal, NJ 07806-5000 and Chemical Command
ATTN: AMSMC-IMP-LCommander Rock Island, IL 61299-7300U.S. ARDECATTN: SMCAR-AET 1 Commander
Mr. R. Kline U.S. Army Aviation Systems CommandPicatinny Arsenal, NJ 07806-5000 ATTN: AMSAV-ES
4300 Goodfellow BlvdOPM Nuclear St Louis, MO 63120-1789ATTN: AMCPM-NUC
COL. N. Barron 1 CommanderPicatinny Arsenal, NJ 07806-5000 David W. Taylor Naval Ship
Research and DevelopmentCommander CenterU.S. Army AMCCOM ATTN: Dr. Williams K. BlakeATTN: SMCAR-CAWS-AM Bethesda, MD 20084-5000Picatinny Arsenal, NJ 07806-5000
21
DISTRIBUTION LIST
No. No.
Copies Organization Copies Organization
Director 1 Commander
US Army Aviation Research and US Army TRADOC
Technology Activity ATTN: ATDC-F-A
Moffett Field, CA 94035-1099 Fort Monroe, VA 23651
Commander 1 CommanderUS Army Operations Test and US Army Missile Command
Evaluation Agency ATTN: AMSMI-RDK, Mr. R. Deep
ATTN: CSTE-TM-FA Redstone Arsenal, AL 35898-5230
5600 Columbia PikeFalls Church, VA 22041 1 Director
US Army Missile and Space
Commander Intelligence Center
US Army Communications ATTN: AIAMS-YDLElectronics Command Redstone Arsenal, AL 35898-5500
ATTN: AMSEL-EDFort Monmouth, NJ 07703-5000 1 Commander
US Army Tank Automotive Command
Commander ATTN: AMSTA-TSLCECOM R&D Technical Library Warren, MI 48397-5000ATTN: AMSEL-IM-L,
(Reports Section) B. 2700 1 AFWL/SULFort Monmouth, NJ 07703-5000 Kirtland AFB, NM 87117-6008
10 C.I.A. 1 DirectorOIC/DB/Standard US Army TRADOC Analysis CenterGE47 HQ ATTN: ATOR-TSLWashington, DC 20505 White Sands Missile Range
NM 88002-5502
CommandantUS Army Infantry School 1 CommanderATTN: ATSH-CD-CS-OR US Army Development & EmploymentFort Benning, GA 31905-5400 Agency
ATTN: MODE-ORO
Commander Fort L2wis, WA 98433L5000US Army Missile CommandResearch Development and 1 Commandant
Engineering Center US Army Field Artillery SchoolATTN: AMSMI-RD ATTN: ATSF-GDRedstone Arsenal, AL 35898-5230 Fort Sills, OK 73503
22
DISTRIBUTION LIST
No. No.Copies Organization Copies Organization
1 CommanderUS Army Yuma Proving Ground 1 CommanderATTN: STEYP-MTW U.S. ARDEC
Mr. J. Peters ATTN: Fire Support Armaments CenterYuma, AZ 85365-9103 Mr. Modesto Barbarisi
Picatinny Arsenal, NJ 07806-50001 Director
US Army Field Artillery BoardATTN: ATZR-BDWFort Sill, OK 73503 Aberdeen Proving Ground
1 AFATL/DLODL Director, USAMSAATech Info Center ATTN: AMXSY-DEglin AFB, FL 32542-5438 AMXSY-RA
Ms. J. Krolewski2 Raytheon Company AMXSY-NP
Hartwell Road H. CohenATTN: Mr. V.A. GrossoBedford. MA 01730 Commander, USATECOM
ATTN: AMSTE-SI-F1 Commander AMSTE-TE-F
Naval Surface Warfare Center L. NeallyATTN: Dr. W. Yanta W. Vomocil
Aerodynamics BranchK-24, Building 402-12 Commander, PM-SMOKE, Bldg. 324
White Oak Laboratory ATTN: AMCPM-SMK-MSilver Spring, MD 20910 Mr. J. Callahan
1 Director Cdr, CRDEC, AMCCOMNational Aeronautics and Space ATTN: SMCCR-MU
Administration Mr. W. DeeAmes Research Center Mr. C. HughesATTN: Dr. T. Steger ATTN: SMCCR-RSP-AMoffet Field, CA 94035 Mr. Miles Miller
ATTN: SMCCR-SPS-IL1 Vought Corporation SMCCR-RSP-A
Missiles and Advanced SMCCR-MUPrograms DivisionATTN: G.W. KriederP.O. Box 65003Dallas, TX 75265
23
USER EVALUATION SHEET/CHANGE OF ADDRESS
This Laboratory undertakes a continuing effort to improve the quality of thereports it publishes. Your comments/answers to the items/questions below willaid us in our efforts.
1. BRL Report Number Date of Report
2. Date Report Received
3. Does this report satisfy a need? (Coment on purpose, related project, orother area of interest for which the report will be used.)
4. How specifically, is the report being used? (Information source, designdata, procedure, source of ideas, etc.)
S. Has the information in this report led to any quantitative savings as far
as man-hours or dollars saved, operating costs avoided or efficiencies achieved,
etc? If so, please elaborate.
6. General Comments. What do you think should be changed to improve future
reports? (Indicate changes to organization, technical content, format, etc.)
Name
CURRENT Organization
ADDRESS Address
City, State, Zip
7. If indicating a Change of Address or Address Correction, please provide the
New or Correct Address in Block 6 above and the Old or Incorrect address below.
Name
fLo OrganizationADDRESS
Address
City, State, Zip
(Remove this sheet, fold as indicated, staple or tape closed, and mail.)
FOLD HERE
Director NO POSTAGEU.S. Army Ballistic Research Laboratory NECESSARY
ATTN: SLCBR-DD-T IF MAILED
Aberdeen Proving Ground, MD 21005-5066 IN THE
OFFICIAL BUSINESS
PENALTY FOR PRIVATE se. ,o BUSINESS REPLY MAILFIRST CLASS PERMIT NO 12062 WASHINGTON,OC
POSTAGE WILL BE PAID BY DEPARTMENT OF THE ARMY
DirectorU.S. Army Ballistic Research Laboratory
ATTN: SLCBR-DD-T
Aberdeen Proving Ground, MD 21005-9989
FOLD HERE