greslar ceramic rustic catalog
DESCRIPTION
Greslar currently has two business areas, a product for the manufacture of fireplaces, stoves and barbecues, complete with the marketing of clay refractory, mortar and cement refractory firebrick and other home decoration and interior fireplaces (Construction) with rustic . We are also able to manufacture ceramic products according to specific customer request. We sell to the entire country, continent and islands, and export to some countries in the European area and North Africa. The stockists of construction materials and contractors are our main customers. The Greslar is located in the center of the country in Boialvo, near the city of Anadia (Portugal). - Solid Brick - Refractory Brick / Firebrick - Pressed bricks and not pressed - Curved Brick - Bricks wedge/down - Fireside - Homes for the oven and pressed into the ground homes - Klinker Brick - Facing Brick - Bricks rounded off - Hollow bricks, bored face in sight, stuck boleado - Rustic Brick - Column brick - Thin Brick - Brick Dented, toothed boleado, - Brick frizzed - Punctured brick - Beaded Brick - Brick Shot - Brick shot, shoot straight, shooting right and boleado - Brick Fin Fin and Double - Decorative Bricks - Brick side walls boleado - Brick type moke - Full Brick Corner - Brick Wedges - Semi-refractory brick - Rustic Tiles - Ceramic Paver / pavers - Clay to heat (Brand Greslar) - Mortar Refractory (Brand Greslar) - Refractory cement (Electroland and Aluminite) Various measures and different formats Colors: White, Semi-White, Red, Brown & Brown Aged If you are interested in our products, you can get in touch email: [email protected] www.greslar.pt www.facebook.com/GreslarTRANSCRIPT
Avelãs deCaminho
Coimbra
Porto7 Km
EN
1 (
IC2
)
Av. de Cima
Boialvo
GPS40º 29º 52.44 N8º 22´ 47.75 O
GRESLAR - ARTIGOS DE CERÂMICA, LDA.RUA DA TAPADA, 27 BOIALVO3780-402 ANADIAT +351 231 522 565 | F +351 231 522 [email protected]
www.greslar.pt
THE COLORS ARE OURS, THE APPLICATION IS IMAGINATION
Catalog 2011
Linha Calor
22x11x3 BReferª 101
22x11x5 S/BReferª 106
22x11x3 S/BReferª 102
22x11x5 BReferª 105
22x11x6 BReferª 110
Curvo r 55 BReferª 116
22x6x3 S/BReferª 301
22x5x5 Dentado S/BReferª 341
19x9x5 Coluna 1 S/BReferª 381
22x6x6 S/BReferª 311
22x7x5 Moldura S/BReferª 371
19x9x5 Continuação S/BReferª 383
Curvo r 45 BReferª 118
22x11x6 S/BReferª 111
Cunha/Baixo BReferª 119
Lar 25x25x3 BReferª 112
22x6x3 c/c S/BReferª 302
22x5x5 Dentado c/c S/BReferª 342
19x9x5 Coluna 2 S/BReferª 382
22x6x6 c/c S/BReferª 312
22x7x5 Continuação S/BReferª 372
Alheta 22x5x2 S/BReferª 837
Linha Calor
22x7x5 Remate S/BReferª 373
23x11x6 Frisado S/B
Cimento (Electroland)
Referª 905 Barro p/ CalorReferª 902 Argamassa p/ Calor
Referª 903
22x5x5 Remate Recto S/BReferª 348
22x11x6 Furado S/BReferª 362
22x11x6 Tipo Burro S/BReferª 115
22x5x5 Remate Boleado S/BReferª 349
Linha Rústica
22x11x3 CReferª 201
22x11x5 CReferª 205
22x11x3 Envelhecido
Referª 202
22x11x5 Envelhecido
Referª 206
22x11x6 CReferª 210
22x11x6 Envelhecido
Referª 211
Curvo r. 55 CReferª 216
Cunha Baixo CReferª 219
Curvo r. 45 CReferª 218
Lar 25x25x3 CReferª 212
22x6x3 CReferª 401
22x6x3 c/c CReferª 402
22x7x3.5 c/c CReferª 422
15x7x3,5 CReferª 421
22x7x3.5 c/c 2 Topos CReferª 423
22x6x6 c/c CReferª 412
22x6x6 CReferª 411
22x6x6 Boleado 2 Topos CReferª 413
29x6x6 Murete Boleado 2 Topos c/c CReferª 418
Linha Rústica
22x5x5 Dentado CReferª 441
22x7x5 Remate CReferª 826
22x5x5 Boleado C
Referª 442Dentado
22x7x5 Continuação C
Referª 825
22x5x5 Remate Direito C
Referª 448
22x5x5 Remate Boleado C
Referª 449
22x7x5 Moldura CReferª 821
Canto completo de moldura C
Referª 822
19x9x5 Coluna 1 CReferª 831
19x9x5 Coluna 2 CReferª 832
19x9x5 Continuação CReferª 835
22x11x6 Furado f/vista
Referª 812
22x11x6 Furado f/vista Boleado
Referª 81322x11x6 4 f. vista - tipo burro
Referª 710
20x10x5 Prensado CReferª 01
22x11x6 Boleado Baixo (degrau)
Referª 602
Alheta 22x5x2 (dupla)Referª 931
Tijoleira Rústica 22x22x2Referª 921
NOVO
Linha Rústica
Useful Recommendations:
- Due to the characteristics of ceramic products, light dimensional and tonality variations may occur,
however these are considered normal and inherent (natural) to the manufacturing process. The
measures presented are merely a reference.
- For a better use, bricks from different pallets should be chosen to archieve a good tolerance in the
dimensions. The use ought to be done with maximum care. The common dimension for the joint is set
between 10 and 20 mm.
- A lowered joint should not be done.
- In order to get a uniform tonality in façades it is important to use bricks from alternate pallets.
- The construction must be made on a perfectly levelled base, isolated from all dampness from the soil
so as to avoid efflorescence by absorption.
- Bricks should be laid on flat places (surfaces) with no dirt or dampness.
- Use mortar, Portelande kind, with low aluminium tricalcium Phosphate and sulphate content to avoid
the appearance of afflorescence.
- Do not use too agressive cleaning products in the walls as they may alter the brick´s natural aspect.
- If efflorescence appears, it may be cleaned with a 10% hydrochloric acid solution.
- Avoid the accumulation and use of water in excess when putting bricks in façades.
- The superior parts of façades should be protected to avoid the change of colour due to saturation by
rain.
- It´s important to protect the construction during rainy days.
- Don´t cover the wall while wet.
- When using «hidrofugantes» products, these should be used in the summer, while the façades are
completely dry. The use of varnishes that do not allow the respiration of the bricks is not advisable.
- It´s important that a dry, hot period of time passes so that the construction may dry and its final aspect
may be enjoyed.
- It´s not necessary to wet the brick before using it, this could cause taints in the bricks and reduce its
absorption capacity, thus avoiding the dehydration that the mortar undergoes when in contact with the
taints.
- Not following these recommendations may originate / may lead to problems in the bricks, in such a
way that the responsibility will be from the constructor.Therefore, all the recommendations on the use of this material should be taken into consideration.
- Our products should always be stored in proper places, sheltered from the weather.
- The GRESLAR products are recommended for coating interiors.
Avelãs deCaminho
Coimbra
Porto7 Km
EN
1 (
IC2
)
Av. de Cima
Boialvo
GPS40º 29º 52.44 N8º 22´ 47.75 O
GRESLAR - ARTIGOS DE CERÂMICA, LDA.RUA DA TAPADA, 27 BOIALVO3780-402 ANADIAT +351 231 522 565 | F +351 231 522 [email protected]
www.greslar.pt
THE COLORS ARE OURS, THE APPLICATION IS IMAGINATION
Catalog 2011