global resources · 2008. 2. 9. · [email protected], tranter international ab maria skolgata 79b,...
TRANSCRIPT
-
9510
5-95
40
20
06-0
6Tranter, Inc.P.O. Box 2289, Wichita Falls, TX 76307, USATel: +1 940 723 7125, Fax: +1 940 723 5131
[email protected], www.tranter.com
Tranter International ABMaria Skolgata 79B, SE-118 53 Stockholm, Sweden
Tel: +46 8 442 49 70, Fax: +46 8 442 49 [email protected], www.tranter.com
Global resourcesTranter is a global company, represented in all continents. We are close to our customers via our own companies, agents and distributors. We have been supplying top quality and performance heat exchangers since we started 65 years ago. Thanks to our long experience and local presence, we can always offer our customers local service.
Tranter has production facilities in Sweden, India and the USA, all certified to ISO9001.
-
9510
5-95
40
20
06-0
6
Gasketed and WeldedHeat Exchangers for Every Need
www.tranter.com
-
Gasketed Plate Heat Exchangers
The world's largest range of efficient heat exchangers for a wide variety of applications. The heat exchangers are built on a module-based concept. Frames, plates and connections can be combined to form a number of different exchanger types. By using different types of plates, with different characteristics, the exchangers can be adapted to a wide variety of applications. The exchangers can easily be dismantled for inspection, cleaning and maintenance. Another benefit of the gasketed plate heat exchangers is that they can easily be expanded or adapted, by adding or replacing plates, when the conditions change.
Removable Cover
Carrying Bar
Guide Bar
Fixed Cover
GasketPlate Pack
Roller Assembly
Flow ranges: 10 – 4600m3/h
Working Pressure: 10 – 25 bar
Temperature range: -20°C – +180°C
Connections: DN25 – DN500 Weld neck, flange or threaded
Specifications may be changed without prior notice. Please contact us for specific details
-
Welded Plate Heat ExchangersCompact heat exchangers for extreme temperatures, pressures and special designs that exceed gasket limitations. They offer high performance, small sizes and minimal maintenance. The exchangers can handle liquids, gases and two-phase mixtures at very high pressures and at low and high temperatures. They are manufactured to meet customer needs for the highest quality and efficiency.
The large number of dimpled contact points in heat exchangers such as Maxchanger and Econocoil provide maximum pressure resistance and heat transfer.
The welded, sealed channels reduce the risk of intermixing fluids.
-
Gasketed Plate Heat Exchangers
GC and GL Plates Symetrical plates for regular use. Different plate patterns allow for optimization of thermal transfer or pressure drop.
An obtuse angle (high-theta plate) gives high resistance and an acute angle (low-theta plate) a low pressure drop.
GX Ultraflex Plates The plates are available with a herringbone pattern and either an acute or obtuse angle, making it possible to achieve six channel combinations.
Ultraflex allows asymmetrical designs, with the primary and secondary circuits designed for heat transfer efficiency
MS= Medium-theta, same direction
LS= Low-theta,
same direction
MD= Medium-theta,
different directions
LD= Low-theta,
different directions
HD= High-theta,
different directions
HS= High-theta,
same direction
The Ultraflex design allows the two plates to be turned and rotated, giving six combinations of high- and low-theta plate pairs, matching the performance parameters of your application.
-
GF Wide Gap Plates Plates with wide channels for fibre- and particle-rich fluids.
With a channel depth two to five times wider than normal, permitting unrestricted passage of coarse particles and fluids containing fibres.
GW Semi Welded PlatesWith a sealed channel for ammonia and other fluids.
The plate pattern is optimized for cooling applications to give high thermal efficiency even with asymmetrical flows.
GD Double Wall Plates Two plates laser-welded together for optimal safety.
For applications such as pharmaceutical industry, food industry, district heating, cooling of transformer oil, etc., where it is vital that media are not mixed.
Even if medium 1 should leak, it cannot mix with medium 2
Gasket
Fluid 1
Fluid 2
Medium/Medium
Wide/Narrow
The plate pairs are welded together to form a sealed channel for ammonia or other fluids.
WaterAmmonia
Weld
Gasket
-
SupermaxTM All-welded plate heat exchanger for high performance in industrial applications. It can be manufactured from dissimilar materials when only one side will be exposed to corrosive conditions.
Max flow: No real limitation*
Max work. pressure: 70 bar
Temp. range: -195°C – +540°C
Connection: DN25 – DN300 Weld neck, flange or threaded
* No upper limitation as elements can be connected in parallel within the unit
Welded Heat Exchangers
The specifications may be changed without prior notice. Please contact us for specific details.
Ultramax® A scalable solution that offers all the benefits of a plate-type exchanger but overcomes the limitations of gasketed models.
A range of different solutions is available, providing endless possibilties. A double wall option is available.
Max flow: No real limitation*
Max work. pressure: 70 bar
Temp. range: -195°C – +345°C**
Connection: DN25 to DN300 Weld neck, flange, threaded or sanitary standard execution
* No upper limitation as elements can be connected in parallel within the unit ** Higher temperatures and pressures possible in special solutions
-
Maxchanger®Compact and versatile all-welded plate and frame heat exchanger.
For high performance in compact space. Different fitting configurations allows flexibility. Double wall option.
Platecoil® Prime surface/immersion heat ex-changer. Constructed from two metal sheets forming a series of passages through which heating or cooling media*) flows.
Available in over 300 sizes and in a variety of custom designed solutions.
Max flow: No real limitation*
Max work. pressure: 28 bar
Temp. range: Up to 205°C
* No upper limitation as elements can be connected in parallel within the unit
* Water, freon, ammonia, calcium or sodium brine.
Econocoil®A light duty heat exchanger for a wide range of heating and cooling applications. Can be custom designed in a variety of shapes like this bank offering a low pressure drop.
Max flow: No real limitation*
Max work. pressure: 18 bar
Temp. range: -195°C – +205°C standard execution
* No upper limitation as elements can be connected in parallel within the unit
Max flow: No real limitation*
Max work. pressure: 70 bar
Temp. range: Up to +540°C
Connection: Threaded standard, options available
* No upper limitation as elements can be connected in parallel within the unit
The specifications may be changed without prior notice. Please contact us for specific details.