gf piping systems worldwide at home
TRANSCRIPT
Global Installation F
ittings and K-Factors
3-0000.706 (B-7/10) #1285 (7/10)©Copyright Georg Fischer Signet LLC.3401 Aerojet Avenue, El Monte, CA 91731-2882Tel (626) 571-2770, Fax (626) 573-2057Printed in U.S.A.
GF Piping Systems worldwide at homewww.gfsignet.com
Global Installation Fittingsand K-Factors
The technical data is not binding. They neither constitute expressly warranted characteristics nor guaranteed properties nor a guaranteed durability. They are subject to modification. Our General Terms of Sale apply. Adding Quality to People’s Lives
Our sales companies and representatives ensure local customer
support in over 100 countries.
K-Factor
GlobalArgentina / Southern South AmericaGeorg Fischer Central Plastics Sudamérica S.R.L.Buenos Aires, ArgentinaPhone +5411 4512 02 [email protected]
AustraliaGeorge Fischer Pty LtdRiverwood NSW 2210 AustraliaPhone +61(0)2 9502 8000 [email protected]
Austria Georg Fischer Rohrleitungssysteme GmbH3130 HerzogenburgPhone +43(0)2782 856 [email protected]
Belgium / LuxembourgGeorg Fischer NV/SA1070 Bruxelles/BrüsselPhone +32(0)2 556 40 [email protected]
BrazilGeorg Fischer Ltda04795-100 São PauloPhone +55(0)11 5525 [email protected]
CanadaGeorg Fischer Piping Systems LtdBrampton, ON L6T 4E3Phone +1(905)792 8005Fax +1(905)792 [email protected]
ChinaGeorg Fischer Piping Systems Ltd Shanghai Pudong, Shanghai 201319Phone +86(0)21 58 13 33 33 [email protected]
Denmark / IcelandGeorg Fischer A/S2630 TaastrupPhone +45 (0)70 22 19 [email protected]
FranceGeorg Fischer SAS95932 Roissy Charles de Gaulle CedexPhone +33(0)1 41 84 68 [email protected]
GermanyGeorg Fischer GmbH73095 Albershausen Phone +49(0)7161 [email protected]
IndiaGeorg Fischer Piping Systems Ltd400 076 MumbaiPhone +91 224007 [email protected]
ItalyGeorg Fischer S.p.A.20063 Cernusco S/N (MI)Phone +3902 921 [email protected]
NorwayGeorg Fischer AS1351 Rud Phone +47(0)67 18 29 [email protected]
PolandGeorg Fischer Sp. z o.o.05-090 Sekocin Nowy Phone +48(0)22 31 31 0 50 [email protected]
RomaniaGeorg Fischer Piping Systems Ltd020257 Bucharest - Sector 2Phone +40(0)21 230 53 [email protected]
RussiaGeorg Fischer Piping SystemsMoscow 125047Tel. +7 495 258 60 [email protected]
SingaporeGeorge Fischer Pte Ltd528 872 SingaporePhone +65(0)67 47 06 [email protected]
Spain / PortugalGeorg Fischer S.A.28046 MadridPhone +34(0)91 781 98 [email protected]
Sweden / FinlandGeorg Fischer AB117 43 StockholmPhone +46(0)8 506 775 00info.se.ps@georgfischer.comwww.georgfischer.sewww.georgfischer.fi
SwitzerlandGeorg Fischer Rohrleitungssysteme (Schweiz) AG8201 SchaffhausenPhone +41(0)52 631 30 [email protected]
TaiwanGeorg Fischer Piping SystemsSan Chung City, Taipei HsienPhone +886 2 8512 2822Fax +886 2 8512 2823www.georgfischer.tw
United Kingdom / IrelandGeorge Fischer Sales LimitedCoventry, CV2 2STPhone +44(0)2476 535 [email protected]
USA / CaribbeanGeorg Fischer LLCTustin, CA 92780-7258Phone +1(714) 731 88 00 Toll Free 800 854 40 [email protected]
International Georg Fischer Piping Systems (Switzerland) Ltd.8201 Schaffhausen/SwitzerlandPhone +41(0)52 631 30 03Fax +41(0)52 631 28 [email protected]
JapanGeorg Fischer Ltd556-0011 Osaka, Phone +81(0)6 6635 [email protected]
Korea Georg Fischer Piping SystemsGuro-3 dong, Guro-gu, Seoul, KoreaPhone +82(0)2 2081 1450Fax +82(0)2 2081 1453 [email protected]
MalaysiaGeorge Fischer (M) Sdn. Bhd.40460 Shah Alam, Selangor Darul EhsanPhone +60 (0)3 5122 [email protected]
Mexico / Northern Latin AmericaGeorg Fischer S.A. de C.V.Apodaca, Nuevo LeonCP66636 MexicoPhone +52 (81)1340 8586Fax +52 (81)1522 [email protected]
Middle EastGeorge Fischer Piping Systems Dubai, United Arab Emirates Phone +971 4 289 49 60 [email protected]
NetherlandsGeorg Fischer N.V.8161 PA EpePhone +31(0)578 678 222 [email protected]
K-Factor CD
3
How to Find your Installation Fitting
EUROPE - Fittings
PVC-U
PP
PE
PVDF
ABS
COOL-FIT
Metals
ASIA - Fittings
JIS
PVC-U / PVC-C
PP
PVDF
Fibreglass
ABS
Metals
Electrofusion
USA - Fittings
PVC-U / CPVC
PP
PVDF
Fiberglass
Metals
Electrofusion
K-Factors / Union End Table
Support
5
6 – 7
8 – 13
14 – 21
22 – 27
28 – 35
36 – 37
38 – 39
40 – 47
48 – 49
50 – 51
52 – 59
60 – 61
62 – 63
64 – 65
66 – 67
68 – 79
80 – 81
82 – 83
84 – 91
92 – 93
94 – 95
96 – 97
98 – 109
110 – 111
112 – 139
140 – 141
Table of Contents
4
Installation Fittings for Signet Sensors
GF Piping Systems Global Installation Fittings and K-Factor brochure has been developed for our customers around the world. The brochure will guide you in selecting the correct fitting to use with GF Signet sensors.
The new K-Factor Calculation Tool (provided on the included CD) offers customers an extremely easy, fast and convenient way to calculate K-Factors for GF Signet sensor and fitting combinations.
Along with ease of use, the new tool is capable of automatic database updating via the internet, ensuring that the user always has the most up-to-date information.
The Global Installation Fittings and K-Factor brochure has been separated into regions for ease of accessibility in selecting the proper fittings available within your region.
Each region provides an overview table outlining the various GF fittings. Fittings are available in metric, JIS or ASTM, and vary by region.
Added Value
5
2
1
3
4
5
Select yourRegion/Connection Standard
Select yourPipe Material
K-FactorReference
Note: The sensor length will be selected by the fitting.
PVC-U / PVC-C
PE
PVDF
ABS
METALS
EUR
OPE
ASI
AU
SA
How
to fi
nd y
our
inst
alla
tion
fitt
ing
Choose yourFitting
Find yourSensor
6
Material Fitting Joint Gasket Dimension Sensor Type Pressure Temperature Page
PVC
-U
Solvent cementing EPDM/FPM d20 - d63 Flow, pH max. 16 bar 0 °C - +60 °C 8
Hot gas back welding no gasket d75 - d630 Flow, pH
depends on quality of the welding
0 °C - +60 °C 8
Solvent cementing no gasket d75 - d315 Flow max. 10 bar 0 °C - +60 °C 10
Saddle/ Solvent cementing EPDM/FPM d75 - d225 Flow, pH max. 16 bar 0 °C - +60 °C 10
Alternative solution can be a PP saddle or wafer. Pipe size, pressure rating and chemical resistance need to be evaluated.
PP
-H
Socket fusion EPDM/FPM d20 - d63 Flow, pH max. 16 bar -10 °C - +95 °C 14
Butt fusion EPDM/FPM d20 - d63 Flow, pH max. 16 bar -10 °C - +95 °C 14
Hot gas back welding no gasket d75 - d630 Flow, pH
depends on quality of the welding
-10 °C - +95 °C 14
Screw-on saddle EPDM d75 - d315 Flow 5 - 8 bar 0 °C - +40 °C 16
Flange adapters EPDM/FPM d75 - d315 Flow max. 16 bar -10 °C - +95 °C 16
Screw-on saddle NBR d25 - d225 Other 10 - 16 bar -10 °C - +45 °C 18
Socket fusion no gasket d75 - d400 Other max. 16 bar -10 °C - +60 °C 20
PE
Hot gas back welding no gasket d75 - d630 Flow, pH
Depends on quality of the welding
-10 °C - +60 °C 24
Socket fusion no gasket d75 - d400 Other max. 16 bar -10 °C - +60 °C 24
via ELGEF saddle no gasket d63 - d400 Other max. 16 bar -10 °C - +60 °C 24
via ELGEF saddle no gasket d63 - d400 Other max. 12.5 bar -10 °C - +60 °C 24
Alternative solution can be a PP saddle or wafer. Pipe size, pressure rating and chemical resistance need to be evaluated.
Table of Contents
Europe Fittings
7
Material Fitting Joint Gasket Dimension Sensor Type Pressure Temperature Page
PVD
F
Socket fusion FPM d20 - d63 Flow, pH max. 16 bar -20 °C - +140 °C 28
Butt fusion FPM d20 - d63 Flow, pH max. 16 bar -20 °C - +140 °C 28
Hot gas back welding no gasket d75 - d630 Flow, pH
Depends on quality of the welding
-20 °C - +140 °C 30
Flange adapters FPM d75 - d225 Flow max. 16 bar -20 °C - +140 °C 30
Butt fusion no gasket d63 - d110 Other max. 16 bar -20 °C - +140 °C 32
Butt fusion no gasket d63 - d225 Other max. 16 bar -20 °C - +140 °C 32
Socket fusion no gasket d63 - d110 Other max. 16 bar -20 °C - +140 °C 34
AB
S
Solvent cementing no gasket d25 - d63 Flow, pH max. 10 bar -40 °C - +60 °C 36
Solvent cementing no gasket d75 - d225 Flow max. 10 bar -40 °C - +60 °C 36
CO
OL-
FIT Solvent
cementing no gasket d25 - d225 Flow max. 10 bar -40 °C - +40 °C 38
Solvent cementing no gasket d25 - d225 Pressure max. 10 bar -40 °C - +40 °C 38
Met
als
Welding no gasket d63 - d630 Flow max. 16 bar – 40
Welding NBR d40 - d800 Flow max. 16 bar – 40
Welding no gasket d20 - d32 Flow max. 16 bar – 40
Welding no gasket d40 - d315 Flow max. 16 bar – 40
Straping EPDM/NBR d60 - d355 Other max. 16 bar – 42
Clamping NBR d68 - d289 Other max. 16 bar – 44-46
EUR
OPE
8
PVC-U
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on page 139)
Type 314, PVC-U, weld o let, metric
Code No. d [mm] DN [mm] Sensor Type
721 314 000 75 - 180 65 - 150 Flow -X0, pH - XX
721 314 001 200 - 355 200 - 350 Flow -X1
721 314 002 400 - 630 350 - 600 Flow -X2
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 272X-XX• Sensor length depends on installation fitting
Type 310, PVC-U for Socket Systems metric
EPDM Code No.
FPM Code No.
d [mm]
DN [mm]
Sensor Type
721 310 006 721 310 036 20 15 Flow -X0, pH -XX
721 310 007 721 310 037 25 20 Flow -X0, pH -XX
721 310 008 721 310 038 32 25 Flow -X0, pH -XX
721 310 009 721 310 039 40 32 Flow -X0, pH -XX
721 310 010 721 310 040 50 40 Flow -X0, pH -XX
721 310 011 721 310 041 63 50 Flow -X0, pH -XX
Alternative solution can be a PP saddle or wafer. Pipe size, pressure rating and chemical resistance need to be evaluated.
9
Tee
Type 310, PVC-U for Socket Systems metric
d [mm]
PND [mm]
z [mm]
L[mm]
L1[mm]
H [mm]
20 16 43 48 128 90 76
25 16 51 53 144 100 78
32 16 58 58 160 110 81
40 16 72 58 168 110 85
50 16 83 63 188 120 89
63 16 100 68 212 130 95
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting
Weld o let
Type 314, PVC-U, weld o let, metric
d [mm] D [mm] L [mm]
75 - 180 37.5 68
200 - 355 37.5 102
400 - 630 37.5 178
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Please consult the instruction manual• For conventional hot gas back welding according to DVS 2207 part 3• Your maximum allowable pressure may be determined by the pressure rating of the pipe material, quality of weld and/or installed sensor• pH sensors can only be used up to 4 in. or DN100 pipe
PVC
-U
272X
515
2537
2536
2551
10
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX• Sensor length depends on installation fitting
• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX• Sensor length depends on installation fitting
Type 312, PVC-U, Glue-on Saddle, metric
Code No.d [mm]
DN [mm]
Sensor Type
721 312 012 75 65 Flow -X1
721 312 013 90 80 Flow -X1
721 312 014 110 100 Flow -X1
721 312 015 125 100 Flow -X1
721 312 016 140 125 Flow -X1
721 312 017 160 150 Flow -X1
721 312 019 200 200 Flow -X1
721 312 020 225 200 Flow -X2
721 312 021 250 250 Flow -X2
721 312 023 315 300 Flow -X2
PVC-U
Flow and pH
Type 312, PVC-U Clamp-on Saddle, metric
Code No.d [mm]
DN [mm]
Sensor Type
198 150 538 75 65 Flow -X0, pH-XX
198 150 539 90 80 Flow -X0, pH-XX
198 150 540 110 100 Flow -X0, pH-XX
198 150 543 160 150 Flow -X1
198 150 545 225 200 Flow -X1
Alternative solution can be a PP saddle or wafer. Pipe size, pressure rating and chemical resistance need to be evaluated.
11
Saddle
Type 312, PVC-U, Glue-on Saddle, metric
d [mm] PN D [mm] H [mm]
75 10 38 89
90 10 38 89
110 10 38 89
125 10 38 81
140 10 38 79
160 10 38 76
200 10 38 69
225 10 38 141
250 10 38 137
315 10 38 127
Type 312, PVC-U Clamp-on Saddle, metric
d [mm] PN H [mm] L [mm]
75 16 99 105
90 16 105 105
110 16 114 105
160 16 156 120
225 16 184 120
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Top saddle for solvent cement bonding• Seal: Lip seal of EPDM• pH sensors can only be used up to 4 in. or DN100 pipe
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Top saddle for solvent cement bonding
PVC
-U
272X
515
2537
2536
2551
12
Type 310, BSP PVC-U for Socket Fusion, BS inch
EPDM Code No.
FPM Code No.
d [in.]
d [mm]
DN [mm]
Sensor Type
721 310 306 721 310 336 1/2 20 15 Flow -X0, pH -XX
721 310 307 721 310 337 3/4 25 20 Flow -X0, pH -XX
721 310 308 721 310 338 1 32 25 Flow -X0, pH -XX
721 310 309 721 310 339 1¼ 40 32 Flow -X0, pH -XX
721 310 310 721 310 340 1½ 50 40 Flow -X0, pH -XX
721 310 311 721 310 341 2 63 50 Flow -X0, pH -XX
Type 312, BSP PVC-U, Clamp-on Saddle, BS inch
Code No.d [in.]
DN [mm]
Sensor Type
198 150 550 3 80 Flow -X0, pH -XX
198 150 551 4 100 Flow -X0, pH -XX
198 150 554 6 150 Flow -X1
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting• BSP - British Standard Pipe
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX• Sensor length depends on installation fitting• BSP - British Standard Pipe
PVC-U/BS Inch
Flow and pH
Alternative solution can be a PP saddle or wafer. Pipe size, pressure rating and chemical resistance need to be evaluated.
13
Tee
Saddle
Type 310, BSP PVC-U for Socket Fusion, BS inch
d [mm]
PND [mm]
z [mm]
L [mm]
L1 [mm]
H [mm]
20 15 43 48 131 90 76
25 15 51 53 147 100 78
32 15 58 58 164 110 81
40 15 72 58 171 110 85
50 15 83 63 188 120 89
63 15 100 68 211 130 95
Type 312, BSP PVC-U, Clamp-on Saddle, BS inch
d [mm]
PND [mm]
H [mm]
H1 [mm]
L [mm]
90 15 39 105 225 105
110 15 39 114 264 105
160 15 39 156 339 120
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• EPR (EPDM) Gasket
PVC
-U
272X
515
2537
2536
2551
14
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-X0, 3-2551-X0, 3-272X-XX• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on pg 139)
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on pg 139)
Type 318, PROGEF Standard, PP-H for Butt Fusion, metric
EPDM Code No.
FPM Code No.
d [mm]
DN [mm]
Sensor Type
727 318 006 727 318 036 20 15 Flow -X0, pH -XX
727 318 007 727 318 037 25 20 Flow -X0, pH -XX
727 318 008 727 318 038 32 25 Flow -X0, pH -XX
727 318 009 727 318 039 40 32 Flow -X0, pH -XX
727 318 010 727 318 040 50 40 Flow -X0, pH -XX
727 318 011 727 318 041 63 50 Flow -X0, pH -XX
PP
Flow and pH
Type 310, PROGEF Standard , PP-H for Socket Fusion, metric
EPDM Code No.
FPM Code No.
d [mm]
DN [mm]
Sensor Type
727 310 006 727 310 036 20 15 Flow -X0, pH -XX
727 310 007 727 310 037 25 20 Flow -X0, pH -XX
727 310 008 727 310 038 32 25 Flow -X0, pH -XX
727 310 009 727 310 039 40 32 Flow -X0, pH -XX
727 310 010 727 310 040 50 40 Flow -X0, pH -XX
727 310 011 727 310 041 63 50 Flow -X0, pH -XX
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 272X-XX• Sensor length depends on installation fitting
Type 314, PP-H, metric
Code No. DN [mm] Sensor Type
727 314 000 65 - 150 Flow -X0, pH -XX
727 314 001 200 - 350 Flow -X1
727 314 002 350 - 600 Flow -X2
15
Tee
Type 310, PROGEF Standard , PP-H for Socket Fusion, metric
d [mm]
PND [mm]
Z [mm]
L [mm]
L1 [mm]
H [mm]
20 10 48 50 128 90 76
25 10 58 55 142 100 78
32 10 65 60 156 110 81
40 10 79 60 160 110 85
50 10 91 65 176 120 89
63 10 105 70 194 130 95
• Threaded outlet 1¼ inch NPSM• Union end with butt fusion spigot PP-H
• Threaded outlet 1¼ inch NPSM• Union end with fusion socket PP-H
Type 318, PROGEF Standard, PP-H for Butt Fusion, metric
d [mm]
PND [mm]
Z [mm]
L [mm]
L1 [mm]
L2 [mm]
H [mm]
e
20 10 48 112 224 90 52 76 1.9
25 10 58 121 242 100 53 78 2.3
32 10 65 128 256 110 55 81 2.9
40 10 79 136 272 110 60 85 3.7
50 10 91 147 294 120 66 89 4.6
63 10 105 158 316 130 70 95 5.8
• Threaded outlet 1¼ inch NPSM• For conventional hot gas back welding according to DVS 2207 part 3• Please consult the instruction manual• Sensor length depends on installation fitting• Your maximum allowable pressure may be determined by the pressure rating of the pipe material, quality of weld and/or installed sensor• pH sensors can only be used up to 4 in. or DN100 pipe
Weld o letType 314, PP-H, metric
d [mm] D [mm] L [mm]
75 - 180 37.5 68
200 - 355 37.5 102
400 - 630 37.5 178
PP
272X
515
2537
2536
2551
16
PP
Flow
• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX• Sensor length depends on installation fitting
Type 312, PP-H, Screw-on, metric
Code No. d [mm] DN [mm] Sensor Type
727 312 072 75 65 Flow -X1
727 312 073 90 80 Flow -X1
727 312 074 110 100 Flow -X1
727 312 075 125 100 Flow -X1
727 312 076 140 125 Flow -X1
727 312 077 160 150 Flow -X1
727 312 078 180 150 Flow -X2
727 312 079 200 200 Flow -X2
727 312 080 225 200 Flow -X2
727 312 081 250 250 Flow -X2
727 312 082 280 250 Flow -X2
727 312 083 315 300 Flow -X2
• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX/X2-XX• Sensor length depends on installation fitting
Type 311, PROGEF Standard, PP-H, Wafer fitting, metric
EPDM Code No.
FPM Code No.
d [mm]
DN [mm]
Sensor Type
727 311 012 727 311 042 75 65 Flow -X1
727 311 013 727 311 043 90 80 Flow -X1
727 311 014 727 311 044 110 100 Flow -X1
727 311 015 727 311 045 125 100 Flow -X1
727 311 016 727 311 046 140 125 Flow -X1
727 311 017 727 311 047 160 150 Flow -X1
727 311 018 727 311 048 180 150 Flow -X1
727 311 019 727 311 049 200 200 Flow -X1
727 311 020 727 311 050 225 200 Flow -X1
727 311 021 727 311 051 250 250 Flow -X2
727 311 022 727 311 052 280 250 Flow -X2
727 311 023 727 311 053 315 300 Flow -X2
17
Saddle
Type 312, PP-H, Screw-on, metric
d [mm]
PND [mm]
L [mm]
L1 [mm]
H [mm]
H1 [mm]
75 8 34 78 62 172 88
90 8 34 86 69 186 87
110 8 34 98 79 206 86
125 8 34 101 85 212 78
140 6 34 114 104 227 75
160 6 34 114 114 243 72
180 6 34 168 134 348 144
200 6 34 168 132 357 142
225 5 34 174 146 375 136
250 5 34 179 159 397 131
280 5 34 179 167 426 127
315 5 34 248 202 450 120
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Top saddle with EPDM gasket• Stainless steel bolts and nuts• Saddle can be used with other pipe materials
Wafer Type 311, PROGEF Standard, PP-H, Wafer fitting, metric
d [mm]
PND [mm]
H[mm]
L[mm]
L1 [mm]
75 16 88 133 48 61
90 16 102 140 48 69
110 16 132 145 48 79
125 16 132 144 48 79
140 16 157 149 48 94
160 16 182 156 48 106
180 16 182 163 48 106
200 16 236 170 48 134
225 16 236 178 48 134
250 16 289 263 48 160
280 16 289 273 48 160
315 16 329 285 48 185
d
G
• Threaded outlet 1¼ NPSM• Suitable for backing flanges metric and inch• Suitable for SDR 11 - SDR 17.6• Delivered with profile FPM O-ring• Wafer can be used with other pipe materials• Sensor length depends on installation fitting
PP
515
2537
2536
2551
18
PP
Other Sensors
Poly16 Plus Clamp Saddle
Code No.d [mm]
Rp [in.]
Sensor Type
727 627 012 25 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 022 32 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 032 40 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 042 50 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 044 50 1¼ Flow 2552-X2
727 627 052 63 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 054 63 1¼ Flow 2552-X2
727 627 055 63 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 062 75 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 064 75 1¼ Flow 2552-X2
727 627 065 75 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 072 90 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 074 90 1¼ Flow 2552-X2
727 627 075 90 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 082 110 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 084 110 1¼ Flow 2552-X2
727 627 085 110 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 092 125 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 094 125 1¼ Flow 2552-X2
727 627 095 125 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 102 140 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 104 140 1¼ Flow 2552-X2
727 627 105 140 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 112 160 ¾ pH/ORP 2724-X-1, 2726-X-1, 2774-ISO, 2777-ISO, Conductivity 2839-1D, 2842-1D
727 627 114 160 1¼ Flow 2552-X2
727 627 115 160 1½ pH/ORP 3719-2 Flow 2540-21-4, 2552-X4
727 627 124 180 1¼ Flow 2552-X2
727 627 125 180 1½ pH/ORP 3719-2, Flow 2540-21-4, 2552-X4
727 627 145 225 1½ pH/ORP 3719-2 Flow 2540-21-4, 2552-X4
19
272X
3719
2552
2540
SaddlePoly16 Plus Clamp Saddle
d [mm]
PN d1 L L1 H H1
25 16 13 49 79 58 15
32 16 14 49 79 62 20
40 16 21 62 86 71 20
50 16 21 62 86 82 20
50 16 21 62 86 82 20
63 16 24 62 101 96 21
63 16 31 62 101 96 21
63 16 31 62 101 96 21
75 16 21 79 123 104 16
75 16 35 79 123 109 21
75 16 42 79 123 109 21
90 16 21 87 138 118 16
90 16 35 87 138 123 21
90 16 42 87 138 123 21
110 16 20 99 152 150 23
110 16 35 99 152 150 23
110 16 41 99 152 150 23
0.75 16 20 101 166 169 24
125 16 35 101 166 168 23
125 16 41 101 166 168 23
140 16 24 114 207 191 25
140 16 38 114 207 191 25
140 16 45 114 207 191 24
160 16 24 114 226 215 24
160 16 37 114 226 215 24
160 16 45 114 226 215 24
180 10 36 169 262 265 38
180 10 42 169 262 265 38
225 10 45 145 287 287 26
L1
d
d1
Rp
H
L
H1
• Stainless steel bolts• Saddle can be used with other pipe materials• Check H1 value vs. sensor length regarding minimum insertion depth.
PP
20
PP
Flow & Other Sensors
Adapter socket, PP-H, ANSI - NPT
Code No.d [mm]
DN [mm]
NPT [in.]
Sensor Type
727 914 357 75 - 800 65 - 800 3/4 2724-2726, 2774-2777, 2819-2842, 2350, 2450
727 914 358 75 - 800 65 - 800 1 2764-2767
727 914 359 75 - 800 65 - 800 1¼ 2552-X1
727 914 360 75 - 800 65 - 800 1½ 3719-11, 2540-1/-3, 2552-X3
727 914 361 75 - 800 65 - 800 2 3719-21
Adapter socket, PP-H, metric - ISO
Code No.DN [mm]
Rp[in.]
Sensor Type
727 914 357 65 - 800 3/4 2724-X1- 2726-X1, 2774-ISO, 2777-ISO, 2839-1D-2842-1D
727 914 359 65 - 800 1¼ 2552-X2
727 914 360 65 - 800 1½ 3719-12, 2540-2/-4, 2552-X4
21
Adapter socket, PP-H, ANSI - NPT
d [mm]
PND [mm]
L [mm]
L1 [mm]
s [mm]
75 - 800 10 25 51 23 36
75 - 800 10 32 54 23 46
75 - 800 10 40 56 23 55
75 - 800 10 50 60 23 65
75 - 800 10 63 62 23 80
Sockets
Adapter socket, PP-H, metric - ISO
d [mm]
PND [mm]
L [mm]
L1 [mm]
s [mm]
75 - 800 10 25 51 23 36
75 - 800 10 40 56 23 55
75 - 800 10 50 60 23 65
D
Rp
L1
• “d” is for pipe dimension • Connection via socket fusion• Check L1 value vs. sensor length regarding minimum insertion depth.
• “d” is for pipe dimension • Connection via socket fusion• Check H1 value vs. sensor length regarding minimum insertion depth.
PP
PP
272X
3719
2552
2540
D
L1
NPT
22
PE
Flow and pH
PE Tee Fitting
Code No. d [mm] DN [mm] Sensor Type
On Request 20 15 Flow -X0, pH -XX
On Request 15 20 Flow -X0, pH -XX
On Request 32 25 Flow -X0, pH -XX
On Request 40 32 Flow -X0, pH -XX
On Request 50 40 Flow -X0, pH -XX
On Request 63 50 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting
PE Tee Fitting
Code No. d [mm] DN [mm] Sensor Type
On Request 20 15 Flow -X0, pH -XX
On Request 15 20 Flow -X0, pH -XX
On Request 32 25 Flow -X0, pH -XX
On Request 40 32 Flow -X0, pH -XX
On Request 50 40 Flow -X0, pH -XX
On Request 63 50 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting
Alternative solution can be a PP saddle or wafer. Pipe size, pressure rating and chemical resistance need to be evaluated.
23
Tee
PE
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Union end with butt fusion spigot PE
PE Tee Fitting
d [mm]
PND [mm]
L [mm]
L1 [mm]
L2 [mm]
H [mm]
e
20 16 45 196 98 90 76 1.9
25 16 55 212 106 100 78 1.9
32 16 62 228 114 110 81 2.4
40 16 75 234 117 110 85 2.4
50 16 84 250 125 120 89 3.0
63 16 101 266 133 130 95 3.0
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Union end with butt fusion spigot PE
PE Tee Fitting
d [mm]
PND [mm]
L [mm]
L1 [mm]
L2 [mm]
H [mm]
e
20 16 45 196 98 90 76 1.9
25 16 55 212 106 100 78 1.9
32 16 62 228 114 110 81 2.4
40 16 75 234 117 110 85 2.4
50 16 84 250 125 120 89 3.0
63 16 101 266 133 130 95 3.0
272X
515
2537
2536
2551
24
PE
Flow & Other Sensors
Adapter Sockets, PE100, metric - ISO
Code No. d [mm] Sensor Type
753 910 267 75 - 800 272X, 277X-ISO, 2839-1D - 2842-1D
753 910 269 75 - 800 2552-X2
753 910 270 75 - 800 3719-12, 2540-2/-4, 2552-X4
Transition adapter PE/brass (MS58) ISO female thread, metric
Code No. d [mm] Rp [in.] Sensor Type
720 920 231 63 1.25 2552-X2
720 920 241 63 1.50 3719, 2540, 2552-X4
PE adapter ISO female thread, metric
Code No. d [mm] Rp [in.] Sensor Type
173 281 925 63 1.50 3719, 2540, 2552-X4
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
Type 314, PE wedolet, metric and inch
Code No. d [mm] DN [mm] Sensor Type
753 314 000 75 - 180 65 - 150 Flow -X0, pH -XX
753 314 001 200 - 355 200 - 350 Flow -X1
753 314 002 400 - 630 350 - 600 Flow -X2
25
2537
2551
272X
3719
2552
Socket
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Connection via socket fusion• Small “d” is for pipe diameter
Adapter Sockets, PE100, metric - ISO
d [mm]
PNRp [in.]
D[mm]
L [mm]
L1[mm]
s[mm]
75 - 800 10 0.75 25 51 23 36
75 - 800 10 1.25 40 56 23 55
75 - 800 10 1.50 50 60 23 65
D
• 16 bar water• For electrofusion saddle (193 131 XXX and 193 135 159)
Transition adapter PE/brass (MS58) ISO female thread, metric
d [mm] PN L [mm] z
63 16 89 47
63 16 89 47
PE adapter ISO female thread, metric
d [mm] PN L [mm]
63 12.5 54
• Reinforcing ring stainless (A2)• For electrofusion saddle (193 131 XXX and 193 135 159)
Weld o let
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• For conventional hot gas back welding according to DVS 2207 part 3• Your maximum allowable pressure may be determined by the pressure rating of the pipe material, quality of weld and/or installed sensor
Type 314, PE wedolet, metric and inch
d [mm] D [mm] L [mm]
75 - 180 37 68
200 - 355 37 102
400 - 630 37 178
PE
26
PE
Other Sensors
ELGEF Plus, Electrofusion Saddle, PE100, SDR 11
Code No. d [mm]
193 131 037 63
193 131 047 75
193 131 057 90
193 131 067 110
193 131 077 125
193 131 087 140
193 131 097 160
193 131 107 180
193 131 117 200
193 131 127 225
193 131 137 250
193 131 147 280
193 131 157 315-400
ELGEF Plus Branch Fitting
Code No. d [mm]
193 135 159 500 - 630
27
272X
3719
2552
2540
Saddle
ELGEF Plus, Electrofusion Saddle, PE100, SDR 11
d [mm] d1 L [mm]
63 63 165
75 63 165
90 63 165
110 63 165
125 63 165
140 63 165
160 63 165
180 63 165
200 63 165
225 63 165
250 63 165
280 63 165
315-400 63 165
• Connection with transition adapter PE/Brass or PE adapter
ELGEF Plus Branch Fitting
d [mm]
d1 [mm]
H [mm]
L [mm]
L1 [mm]
B [mm]
d2 [mm]
500 - 630 90 102 260 82 263 65
• Can be used with reduction d90 - d63 (753 908 906)• Connection via socket fusion with transition adapter PE/brass or PE adapter
PE
28
PVDF
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on pg 139)
Type 310, SYGEF Standard, PVDF, Socket Fusion, metric
FPM Code No.d [mm]
DN [mm]
Sensor Type
735 310 036 20 15 Flow -X0, pH -XX
735 310 037 25 20 Flow -X0, pH -XX
735 310 038 32 25 Flow -X0, pH -XX
735 310 039 40 32 Flow -X0, pH -XX
735 310 040 50 40 Flow -X0, pH -XX
735 310 041 63 50 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on pg 139)
Type 318, SYGEF Standard, PDVF for Butt Fusion, metric
Code No. d [mm] DN [mm] Sensor Type
735 318 036 20 15 Flow -X0, pH -XX
735 318 037 25 20 Flow -X0, pH -XX
735 318 038 32 25 Flow -X0, pH -XX
735 318 039 40 32 Flow -X0, pH -XX
735 318 040 50 40 Flow -X0, pH -XX
735 318 041 63 50 Flow -X0, pH -XX
29
• Socket fusion equipment is required to install PVDF union tees• FPM O-rings• Sensor length depends on installation fitting
Type 310, SYGEF Standard, PVDF, Socket Fusion, metric
d [mm]
PND [mm]
Z [mm]
L [mm]
L1 [mm]
H [mm]
20 16 45 50 128 90 76
25 16 55 55 142 100 78
32 16 62 60 156 110 81
40 16 75 60 160 110 85
50 16 84 65 176 120 89
63 16 101 70 194 130 95
Tee
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Union end with butt fusion spigot PVDF
Type 318, SYGEF Standard, PDVF for Butt Fusion, metric
d [mm]
PND [mm]
L [mm]
L1 [mm]
L2 [mm]
H [mm]
e
20 16 45 196 90 37 76 1.9
25 16 55 212 100 37 78 1.9
32 16 62 228 110 40 81 2.4
40 16 75 234 110 40 85 2.4
50 16 84 250 120 43 89 3.0
63 16 101 266 130 43 95 3.0
PVD
F
272X
515
2537
2536
2551
30
PVDF
Flow and pH
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX• Sensor length depends on installation fitting
Type 314, SYGEF Standard, PVDF, metric
Code No. d [mm] DN [mm] Sensor Type
735 314 000 75 - 180 65 - 150 Flow -X0, pH -XX
735 314 001 200 - 355 200 - 350 Flow -X1
735 314 002 400 - 630 350 - 600 Flow -X2
• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX• Sensor length depends on installation fitting
Type 311, SYGEF Standard, PVDF, metric
FPM Code No.d [mm]
DN [mm]
Sensor Type
735 311 042 75 65 Flow -X1
735 311 043 90 80 Flow -X1
735 311 044 110 100 Flow -X1
735 311 045 125 100 Flow -X1
735 311 046 140 125 Flow -X1
735 311 047 160 150 Flow -X1
735 310 049 200 200 Flow -X1
735 311 050 225 200 Flow -X1
31
Weld o let
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Please consult the instruction manual• Installation only be trained and certified welder• For conventional hot gas back welding according to DVS 2207 part 3• Your maximum allowable pressure may be determined by the pressure rating of the pipe material, quality of weld and/or installed sensor• pH sensors can only be used up to 4 in. or DN100 pipe
Type 314, SYGEF Standard, PVDF, metric
d [mm] D [mm] L [mm]
75 - 180 37.5 68
200 - 355 37.5 102
400 - 630 37.5 178
Wafer
Type 311, SYGEF Standard, PVDF, metric
d [mm]
PNH [mm]
D [mm]
L [mm]
L1 [mm]
75 10/16 135 88 48 61
90 10/16 141 102 48 69
110 10/16 148 132 48 79
125 10/16 147 132 48 79
140 10/16 153 157 48 94
160 10/16 161 482 48 106
200 10/16 175 236 48 134
225 10/16 185 236 48 134
d
G
• Threaded outlet 1¼ inch NPSM• Suitable for backing flanges metric and inch• Delevered with profile O-ring• Wafer can be used with other pipe materials• Sensor length depends on installation fitting
PVD
F
272X
515
2537
2536
2551
32
PVDF
Other Sensors
SYGEF Plus, PVDF Installation Fitting, PN 16
Code No.d [mm]
DN [mm]
735 918 811 63 50
735 918 812 75 65
735 918 813 90 80
735 918 814 110 100
SYGEF Plus, PVDF Installation Fitting, PN 16
Code No.d [mm]
DN [mm]
735 918 611 63 50
735 918 612 75 65
735 918 613 90 80
735 918 614 110 100
735 918 615 125 100
735 918 616 140 125
735 918 617 160 150
735 918 619 200 150
735 918 620 225 200
SYGEF Plus, PVDF Installation Fitting, PN 10
Code No.d [mm]
DN [mm]
735 918 565 125 100
735 918 566 140 125
735 918 567 160 150
735 918 569 200 200
735 918 570 225 200
33
272X
3719
2552
2540• For all 1/4 to 3/4 inch threaded sensors
SYGEF Plus, PVDF Installation Fitting, PN 16
d [mm]
PND [mm]
H [mm]
L1[mm]
e [mm]
63 16 85 89 25 3.0
75 16 96 101 25 3.6
90 16 110 116 25 4.3
110 16 127 136 25 5.3
Sockets
SYGEF Plus, PVDF Installation Fitting, PN 16
d [mm]
PND [mm]
H[mm]
L [mm]
e[mm]
63 16 106 97 100 3.0
75 16 115 108 90 3.6
90 16 128 121 90 4.3
110 16 145 139 90 5.3
125 16 162 157 100 6.0
140 16 176 171 110 6.7
160 16 194 190 110 7.7
200 16 231 228 110 9.6
225 16 254 251 110 10.8
SYGEF Plus, PVDF Installation Fitting, PN 10
d [mm]
PND [mm]
H[mm]
L [mm]
e [mm]
125 10 162 157 100 3.9
140 10 176 171 110 4.4
160 10 194 190 110 4.9
200 10 231 228 110 6.2
225 10 254 251 110 7.0
• For all 1/8 to 3/4 inch threaded sensors
• For all 1/8 to 3/4 inch threaded sensors
PVD
F
34
PVDF
Other Sensors
SYGEF Standard, PVDF, ANSI - NPT female thread
Code No.d [mm]
DN[mm]
NPT [in.]
Sensor Type
735 915 287 75 - 315 65 -300 3/4 272X, 277X, 2819-2842, 2350, 2450
735 915 288 75 - 315 65 -300 1 276X
735 915 289 75 - 315 65 -300 1¼ 2552-X1
735 915 290 75 - 315 65 -300 1½ 3719-11, 2540-1/-3, 2552-X3
SYGEF Standard, PVDF for ISO female thread
Code No.d [mm]
DN[mm]
Rp [in.]
Sensor Type
735 910 287 75 - 315 65 -300 3/4 272X, 277X-ISO, 2839-1D-2842-1D
735 910 289 75 - 315 65 -300 1¼ 2552-X2
735 910 290 75 - 315 65 -300 1½ 3719-12, 2540-2/-4, 2552-X4
• Check L1 value vs. sensor length regarding minimum insertion depth
• Check L1 value vs. sensor length regarding minimum insertion depth
35
272X
3719
2552
2540
SYGEF Standard, PVDF, ANSI - NPT female thread
PNNPT [in.]
D [mm]
L [mm]
L1[mm]
s[mm]
e [mm]
10 3/4 25 63 40 36 1.9
10 1 32 71 44 46 2.4
10 1¼ 40 79 49 55 2.4
10 1½ 50 84 55 60 3.0
Sockets
SYGEF Standard, PVDF for ISO female thread
PND [mm]
Rp [in.]
L [mm]
L1[mm]
s[mm]
e [mm]
10 25 3/4 63 40 36 1.9
10 40 1¼ 79 49 55 2.4
10 50 1½ 84 55 60 3.0
D
L1
NP
T
• Connection via socket fusion• Small “d” is for pipe dimension
• Connection via socket fusion• Small “d” is for pipe dimension
PVD
F
DRp
L1
36
ABS
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting
Type 310, ABS, metric
Code No.d [mm]
DN [mm]
Sensor Type
729 310 007 25 20 Flow -X0, pH -XX
729 310 008 32 25 Flow -X0, pH -XX
729 310 009 40 32 Flow -X0, pH -XX
729 310 010 50 40 Flow -X0, pH -XX
729 310 011 63 50 Flow -X0, pH -XX
• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX• Sensor length depends on installation fitting
Type 312, ABS Glue-on saddle, metric
Code No.d [mm]
DN [mm]
Sensor Type
729 312 012 75 65 Flow -X1
729 312 013 90 80 Flow -X1
729 312 014 110 100 Flow -X1
729 312 016 140 125 Flow -X1
729 312 017 160 150 Flow -X1
729 312 019 200 200 Flow -X1
729 312 020 225 200 Flow -X1
37
Saddle
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• With solvent cement socket metric
Type 310, ABS, metric
d [mm]
PND [mm]
L[mm]
H[mm]
z[mm]
closest [inch]
25 10 35 100 78 32 0.75
32 10 44 110 81 33 1.00
40 10 51 110 85 29 1.25
50 10 63 120 89 29 1.50
63 10 78 130 95 28 2.00
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Top saddle for solvent cement bonding
Type 312, ABS Glue-on saddle, metric
d [mm]
PND [mm]
H[mm]
closest [inch]
75 10 38 91 2.50
90 10 38 91 3.00
110 10 38 91 4.00
140 10 38 81 5.00
160 10 38 77 6.00
200 10 38 71 8.00
225 10 38 67 8.00
Tee
AB
S
272X
515
2537
2536
2551
38
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX
Type 310, CoolFit, pre-insulated, metric
Code No.d [mm]
DN [mm]
Required nipple Sensor Type
738 310 107 25 20 738 901 107 Flow -X0, pH -XX
738 310 108 32 25 738 901 108 Flow -X0, pH -XX
738 310 109 40 32 738 901 109 Flow -X0, pH -XX
738 310 110 50 40 738 901 110 Flow -X0, pH -XX
738 310 111 63 50 738 901 111 Flow -X0, pH -XX
738 310 112 * 75 65 738 901 112 Flow -X1
738 310 113 * 90 80 738 901 113 Flow -X1
738 310 114 * 110 100 738 901 114 Flow -X1
738 310 116 * 140 125 738 901 116 Flow -X1
738 310 117 * 160 150 738 901 117 Flow -X1
738 310 119 * 200 200 738 901 119 Flow -X1
738 310 120 * 225 200 738 901 120 Flow -X1
• For use with all pressure sensors
Type 313, CoolFit, pre-insulated, metric
Code No.d [mm]
DN [mm]
Required nipple
738 313 107 25 20 738 901 107
738 313 108 32 25 738 901 108
738 313 109 40 32 738 901 109
738 313 110 50 40 738 901 110
738 313 111 63 50 738 901 111
738 313 112 * 75 65 738 901 112
738 313 113 * 90 80 738 901 113
738 313 114 * 110 100 738 901 114
738 313 116 * 140 125 738 901 116
738 313 117 * 160 150 738 901 117
738 313 119 * 200 200 738 901 119
738 313 120 * 225 200 738 901 120
ABS COOL-FIT
Flow, pH and Other Sensors
39
• Threaded outlet 1¼ NPSM• Insulation made from PUR• Outer jacket impact resistant. Color black
Type 310, CoolFit, pre-insulated, metric
d [mm]
PND [mm]
L [mm]
H [mm]
z [mm]
closest [inch]
25 10 90 220 78 110 ¾
32 10 90 220 81 110 1.00
40 10 110 220 85 110 1.00
50 10 110 220 89 110 1½
63 10 125 220 95 110 2.00
* 75 10 140 220 161 110 2½
* 90 10 160 220 171 110 3.00
* 110 10 180 220 181 110 4.00
* 140 10 225 220 193 110 5.00
* 160 10 250 220 202 110 6.00
* 200 10 280 250 211 125 8.00
* 225 10 315 280 225 140 8.00
Tee
• With ½ inch Rp threaded branch for sensors (i.e. pressure)• Insulation made from PUR• Outer jacket impact resistant. Color black
Type 313, CoolFit, pre-insulated, metric
d [mm]
PND [mm]
L [mm]
H [mm]
z [mm]
closest [inch]
25 10 90 160 100 80 ¾
32 10 90 160 100 80 1.00
40 10 110 180 100 90 1¼
50 10 110 180 100 90 1½
63 10 125 200 100 100 2.00
* 75 10 140 220 101 110 2½
* 90 10 160 220 109 110 3.00
* 110 10 180 220 119 110 4.00
* 140 10 225 220 134 110 5.00
* 160 10 250 220 145 110 6.00
* 200 10 280 250 165 125 8.00
* 225 10 315 280 178 140 9.00
*
*
CO
OL-
FIT
272X
515
2537
2536
2551
40
Metals
Flow and pH
Type 314, Stainless Steel, metric
Code No. d [mm] Sensor Type
724 314 000 63 - 180 Flow -X0/ pH -XX
724 314 001 200 - 355 Flow -X1
724 314 002 400 - 630 Flow -X2
• For use with 515, 8510, 2536, 8512, 2537, 2551, 272X• Threaded outlet 1¼ NPSM
• For use with P525-1 and P525-1S only
SS Weld-On Fittings (1.4401)
Code No. DN [mm] Inch
198 150 346 40 - 800 1.5 - 30
• For use with P525-2 and P525-2S
Metalex Socket Weld Mini-Tap (1.4401)
Code DN [mm] Size [in.] Sensor Type
198 840 501 15 0.50 P525-1, -1S
198 840 502 20 0.75 P525-1, -1S
198 840 503 25 1.00 P525-1, -1S
41
525
515
2537
2536
2551
272X
Weld-on
Type 314, Stainless Steel, metric
d [mm] D [mm] D [mm] L [mm]
63 - 180 75 - 180 37 68
200 - 355 200 - 355 37 102
400 - 630 400 - 630 37 178
75D
DN
H
61
49
90
40
SS Weld-On Fittings (1.4401)
Inch DN [mm]
1.5 - 30 40-800
Weld-on mini tap
• For use with SS pipei.d.
H
W
L
Metalex Socket Weld Mini-Tap (1.4401)D [mm]
H [mm]
L [in.]
W [in.]
H [in.]
i.d. [in.]
21.8 8.4 2.0 2.4 3.0 0.85
27.2 12.7 2.0 2.4 3.0 1.06
33.9 12.7 2.0 2.4 3.0 1.325
Met
als
42
• Ready to install, studs and nuts in one package• Do not use these fittings for PE pipes
Multi/Saddle Plus Spatula for use with Iron Multi/Saddle Plus 201
Code No. Description
709 613 904 Spatula for saddle outlet 1¼ inch
709 613 905 Spatula for saddle outlet 1½ inch / d40 + d50
• For use with 3-2552-2X/-3X, 3-2540-XX, 3-3719-11 Wet-Tap assembly with the 3-275X-WTX Wet-Tap electrode• Do not use these fittings for PE pipes• 1½ and 2 inch saddles must be applied for pipes DN80 or larger
• Do not use these fittings for PE pipes
Iron Multi/Saddle Plus 201
EPDM Code NBR Code Inch PN Water
PNGas Sensor Type
709 613 736 709 613 836 1.25 16.0 5.0 2552-2
709 613 738 709 613 838 1.50 16.0 5.0 2552-3, 2540-XX, 3719-11
Multi/Saddle Straps for use with Iron Multi/Saddle Plus 201
Code No. Strap Range [in.] DN min [mm]
DN max [mm]
709 613 930 2.375 3.25 60 80
709 613 932 2.75 3.625 70 90
709 613 934 3.625 4.375 90 110
709 613 936 4.375 5.25 110 130
709 613 938 5.25 6.00 130 150
709 613 940 5.75 6.625 145 165
709 613 942 6.375 7.25 160 180
709 613 944 7.00 7.75 175 195
709 613 946 7.625 8.375 190 210
709 613 948 8.25 9.00 205 225
709 613 950 8.75 9.625 220 240
709 613 952 9.375 10.25 235 255
709 613 954 10.00 10.75 250 270
709 613 956 10.75 11.625 270 290
709 613 958 11.375 12.25 285 305
709 613 960 12.00 12.75 300 320
709 613 962 12.625 13.375 315 335
709 613 964 13.375 14.25 335 355
Metals
Flow and Other Sensors
43
3719
2552
2540
Multi/Saddle
MU
LTI/
SAD
DLE
Hot Tap Adaptor Multi/Saddle Plus 201
Code No. Inch
709 613 638 1½
Met
als
44
Multi/Clamp Saddle Studs threaded outlet 3/4 inch
Code No. Range [mm] PN Water Sensor Type
724 201 062 68 - 78 16 2350, 2450, 272X, 276X, 277X
724 201 074 88 - 110 16 2350, 2450, 272X, 276X, 277X
724 201 098 108 - 134 16 2350, 2450, 272X, 276X, 277X
724 201 134 133 - 155 16 2350, 2450, 272X, 276X, 277X
724 201 170 159 - 181 16 2350, 2450, 272X, 276X, 277X
724 201 194 168 - 190 16 2350, 2450, 272X, 276X, 277X
724 201 206 190 - 212 16 2350, 2450, 272X, 276X, 277X
724 201 218 216 - 238 16 2350, 2450, 272X, 276X, 277X
724 201 230 238 - 260 16 2350, 2450, 272X, 276X, 277X
724 201 254 267 - 289 16 2350, 2450, 272X, 276X, 277X
Metals
Flow and Other Sensors
Multi/Clamp Saddle Studs threaded outlet 1¼ inch
Code No. Range [mm] PN Water Sensor Type
724 201 076 88 - 110 16 2552
724 201 100 108 - 134 16 2552
724 201 136 133 - 155 16 2552
724 201 172 159 - 181 16 2552
724 201 196 168 - 190 16 2552
724 201 208 190 - 212 16 2552
724 201 220 216 - 238 16 2552
724 201 232 238 - 260 16 2552
724 201 256 267 - 289 16 2552
45
3719
2552
2540
Multi/Saddle
• Saddle with threaded outlet• The rubber gasket is available in NBR (EPDM on request)• Lower shell half is without gasket (available on request)
Multi/Clamp Saddle Studs threaded outlet 3/4 inch
Range [mm] PN Water
68 - 78 16
88 - 110 16
108 - 134 16
133 - 155 16
159 - 181 16
168 - 190 16
190 - 212 16
216 - 238 16
238 - 260 16
267 - 289 16
Multi/Clamp Saddle Studs threaded outlet 1¼ inch
Range [mm] PN Water
88 - 110 16
108 - 134 16
133 - 155 16
159 - 181 16
168 - 190 16
190 - 212 16
216 - 238 16
238 - 260 16
267 - 289 16
• Saddle with threaded outlet• The rubber gasket is available in NBR (EPDM on request)• Lower shell half is without gasket (available on request)
Met
als
46
Metals
Flow and Other Sensors
Multi/Clamp Saddle Studs threaded outlet 1½ inch
Code No. Range [mm] PN Water Sensor Type
724 201 101 108 - 134 16 2552, 2540, 3719
724 201 137 133 - 155 16 2552, 2540, 3719
724 201 173 159 - 181 16 2552, 2540, 3719
724 201 197 168 - 190 16 2552, 2540, 3719
724 201 209 190 - 212 16 2552, 2540, 3719
724 201 221 216 - 238 16 2552, 2540, 3719
724 201 233 238 - 260 16 2552, 2540, 3719
724 201 257 267 - 289 16 2552, 2540, 3719
Multi/Clamp Saddle Studs threaded outlet 2 inch
Code No. Range [mm] PN Water Sensor Type
724 201 102 108 - 134 16 3719
724 201 138 133 - 155 16 3719
724 201 174 159 - 181 16 3719
724 201 198 168 - 190 16 3719
724 201 210 190 - 212 16 3719
724 201 222 216 - 238 16 3719
724 201 234 238 - 260 16 3719
724 201 258 267 - 289 16 3719
47
3719
2552
2540
Multi/Saddle
Multi/Clamp Saddle Studs threaded outlet 1½ inch
Range [mm] PN Water
108 - 134 16
133 - 155 16
159 - 181 16
168 - 190 16
190 - 212 16
216 - 238 16
238 - 260 16
267 - 289 16
• Saddle with threaded outlet• The rubber gasket is available in NBR (EPDM on request)• Lower shell half is without gasket (available on request)
Multi/Clamp Saddle Studs threaded outlet 2 inch
Range [mm] PN Water
108 - 134 16
133 - 155 16
159 - 181 16
168 - 190 16
190 - 212 16
216 - 238 16
238 - 260 16
267 - 289 16
• Saddle with threaded outlet• The rubber gasket is available in NBR (EPDM on request)• Lower shell half is without gasket (available on request)
Met
als
48
Table of Contents
Asia Fittings
Material Fitting Joint Gasket Dimension Sensor Type Pressure Temperature Page
JIS
Socket fusion EPDM/FPM d22 - d60 Flow, pH – – 50
Flange adapters – D76-D216 Flow, pH – – 50
PVC
-U
Saddle/ Solvent cementing
EPDM/FPM d75 - d225 Flow, pH max. 16 bar 0 °C - +60 °C 52
Solvent Cementing FPM 0.50 - 2.0 in. Flow, pH max. 16 bar 0 °C – +60 °C 52
Solvent Cementing no gasket 0.50 - 2.0 in. Flow, pH max. 13.8 bar 0 °C – +60 °C 54
Hot gas back welding no gasket 0.50 - 2.0 in. Flow, pH max. 12.6 bar 0 °C – +60 °C 54
Clamp-on saddle EPDM 2.0 - 8.0 in. Flow, pH max. 12.6 bar 0 °C – +60 °C 56
Glue-on saddle no gasket 10 - 12 in. Flow max. 16 bar 0 °C – +60 °C 56
PVC
-C
Solvent Cementing no gasket 0.50 - 2.0 in. Flow, pH max. 13.8 bar 0 °C – +100 °C 58
Solvent Cementing no gasket 0.50 - 2.0 in. Flow, pH max. 13.8 bar 0 °C – +100 °C 58
PP
Socket Fusion EPDM/FPM d20 - d63 Flow, pH max. 16 bar -10 °C – +95 °C 60
Flange adapters EPDM/FPM d75 - d315 Flow max. 16 bar -10 °C – +95 °C 60
PVD
F
Flange adapters FPM d75 - d225 Flow max. 16 bar -20 °C – +140 °C 62
Socket fusion FPM d20 - d63 Flow, pH max. 16 bar -20 °C – +140 °C 62
49
ASI
A
Material Fitting Joint Gasket Dimension Sensor Type Pressure Temperature Page
Fibr
egla
ssSolvent cementing PVDF insert 1.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C - +100 °C 64
Solvent cementing
PVDF insert to 8 in., PVC insert over 8 in.
3.0 - 12.0 in. Flow, pH3 in. max. 10.3 bar4-8 in. max. 6.9 bar10-12 in. max. 5.2 bar
3”-8” -15 °C - +100 °C10, 12” -15 °C - +65 °C 64
AB
S
Solvent cementing no gasket d25 - d63 Flow, pH max. 10 bar -40 °C - +60 °C 66
Solvent cementing no gasket d75 - d225 Flow max. 10 bar -40 °C - +60 °C 66
Met
als
NPT threaded
PVDF insert up to 8 in.PVC insert over 8 in.
0.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C – +100 °C 68
Sweat on
No insert up to 1 in.PVDF insert over 1 in.
0.50 - 1.50 in. Flow, pH max. 13.8 bar 0 °C – +60 °C 68
NPT threaded
no gasket/PVDF insert 1.0 - 2.0 in Flow, pH max. 13.8 bar -15 °C – +100 °C 68
NPT threaded PVDF insert 0.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C – +100 °C 70
NPT threaded PVDF insert 1.0 - 2.0 in Flow, pH – – 70
Weld-on
PVDF insert up to 8 in.PVC insert over 8 in.
2.5 - 12.0 in. Flow, pH max. 13.8 bar -15 °C – +100 °C 72
Braze
PVDF insert up to 8 in.PVC insert over 8 in.
2.5 - 12.0 in Flow, pH – – 72
Weld-on
PVDF insert up to 8 in.PVC insert over 8 in.
2.5 - 12 in. Flow, pH max. 13.8 bar -15 °C - +100 °C 74
Strap-on
Buna-N/PVDF insert up to 8 in.PVC insert over 8 in.
0.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C - +100 °C 74
Socket weld-on to SS pipe
no gasket 0.50 - 1.0 in525-1, 525-1S only
max. 16 bar – 76
Weld-on toSS pipe
Klinger C4401 Thermoseal 1.25 - 12.0 in
525-2, 525-2S only
max. 16 bar – 76
Strap-on Buna-N 2.0 - 12.0 in.525-3, 525-3S only
– – 76
Strap-on EPDM/NBR d60 - d355 Other max. 16 bar – 78
Elec
tro-
fusi
on
– – – – – – 80
50
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX• These fittings are only available from the Georg Fischer sales office in Japan.
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• These fittings are only available from the Georg Fischer sales office in Japan.
JIS PVC-U Tee Fittings
EPDM Code No. FPM Code No. DN [mm] Sensor Type
200 072 063 200 070 933 15 Flow -X0, pH -XX
200 072 064 200 070 934 20 Flow -X0, pH -XX
200 072 065 200 070 935 25 Flow -X0, pH -XX
200 072 066 200 070 936 32 Flow -X0, pH -XX
200 072 067 200 070 937 40 Flow -X0, pH -XX
200 072 068 200 070 902 50 Flow -X0, pH -XX
JIS PVC-U Tee Fittings (Flange Type)
Code No. DN [mm] Sensor Type
200 070 892 65 Flow -X0, pH -XX
200 070 893 80 Flow -X0, pH -XX
200 070 894 100 Flow -X0, pH -X1
200 070 895 125 Flow -X1
200 070 896 150 Flow -X1
200 070 897 200 Flow -X1
JIS
Flow and pH
Type 310, PVC-U for Socket Systems JIS
EPDM Code No.
FPM Code No.
d [mm]
DN [mm]
Sensor Type
721 310 506 721 310 536 20 15 Flow -X0, pH -XX
721 310 507 721 310 537 25 20 Flow -X0, pH -XX
721 310 508 721 310 538 32 25 Flow -X0, pH -XX
721 310 509 721 310 539 40 32 Flow -X0, pH -XX
721 310 510 721 310 540 50 40 Flow -X0, pH -XX
721 310 511 721 310 541 63 50 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
51
JIS PVC-U Tee Fittings
d [mm]
H [mm]
H1 [mm]
L [mm]
L1 [mm]
22 145 225 468 90
26 148 228 144 100
32 151 231 160 110
38 155 235 168 110
48 159 239 188 120
60 164 244 212 130
JIS PVC-U Tee Fittings (Flange Type)
D [mm] DF DP L [mm]
76 175 140 57.2
89 185 150 56.8
114 210 175 56.9
140 250 210 82.0
165 280 240 77.8
216 330 290 71.6
DL
DF
DP
Tee
• Choice FPM or EPR (EPDM) O-ring• Appearance varies in DN15 mm
• Threaded outlet 1¼ inch NPSM• Union end with solvent cement socket• Sensor length depends on installation fitting
Type 310, PVC-U for Socket Systems JIS
d [mm]
PND [mm]
z [mm]
L [mm]
L1 [mm]
H[mm]
20 16 51 56 144 90 76
25 16 51 53 144 100 78
32 16 58 58 160 110 81
40 16 72 58 168 110 85
50 16 83 63 188 120 89
63 16 100 68 212 130 95
JIS
272X
515
2537
2536
2551
52
PVC-U
Flow and pH
Type 310, PVC-U for Socket Systems metric
Part No. EPDM Code No.
FPM Code No.
DN [mm]
Sensor Type
PVMT005 721 310 006 721 310 036 15 Flow -X0, pH -XX
PVMT007 721 310 007 721 310 037 20 Flow -X0, pH -XX
PVMT010 721 310 008 721 310 038 25 Flow -X0, pH -XX
PVMT012 721 310 009 721 310 039 32 Flow -X0, pH -XX
PVMT015 721 310 010 721 310 040 40 Flow -X0, pH -XX
PVMT020 721 310 011 721 310 041 50 Flow -X0, pH -XX
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX• Sensor length depends on installation fitting• These fittings are only available from your local Georg Fischer sales office
Type 312, PVC-U Clamp-on Saddle, metric
Part No. Code No.DN [mm]
Sensor Type
PVMS025 198 150 538 65 Flow -X0, pH-XX
PVMS030 198 150 539 80 Flow -X0, pH-XX
PVMS040 198 150 540 100 Flow -X0, pH-XX
PVMS060 198 150 543 150 Flow -X1
PVMS080 198 150 545 200 Flow -X1
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on page 139)• These fittings are only available from your local Georg Fischer sales office
53
Saddle
Tee
Type 310, PVC-U for Socket Systems metric
PNd [mm]
D [mm]
z [mm]
L[mm]
L1[mm]
H [mm]
16 20 43 48 128 90 76
16 25 51 53 144 100 78
16 32 58 58 160 110 81
16 40 72 58 168 110 85
16 50 83 63 188 120 89
16 63 100 68 212 130 95
Type 312, PVC-U Clamp-on Saddle, metric
PN d [mm] H [mm] L [mm]
16 75 99 105
16 90 105 105
16 110 114 105
16 160 156 120
16 225 184 120
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Top saddle for solvent cement bonding
PVC
-UP
VC-C
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting
272X
515
2537
2536
2551
54
PVC-U
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
PVC-U Tee SCH 80 - Fitting Only
Part No. Code No. Size [in.] Sensor Type
MPV8T005F 159 001 614 0.50 Flow -X0, pH -XX
MPV8T007F 159 001 615 0.75 Flow -X0, pH -XX
MPV8T010F 159 001 616 1.00 Flow -X0, pH -XX
MPV8T012F 159 001 617 1.25 Flow -X0, pH -XX
MPV8T015F 159 001 618 1.50 Flow -X0, pH -XX
MPV8T020F 159 001 619 2.00 Flow -X0, pH -XX
PVC-U Tee SCH 80 - with Pipe
Part No. Code No. Size [in.] Sensor Type
MPV8T005 159 001 623 0.50 Flow -X0, pH -XX
MPV8T007 159 001 624 0.75 Flow -X0, pH -XX
MPV8T010 159 001 625 1.00 Flow -X0, pH -XX
MPV8T012 159 001 626 1.25 Flow -X0, pH -XX
MPV8T015 159 001 627 1.50 Flow -X0, pH -XX
MPV8T020 159 001 628 2.00 Flow -X0, pH -XX
55
Tee
PVC
-UP
VC-C
PVC-U Tee SCH 80 - with Pipe1
L [in.] H [in.] o.d [in.]
14 3.50 0.84
14 3.70 1.05
17 4.00 1.32
20 4.30 1.66
24 4.60 1.90
26.5 5.02 2.38
PVC-U Tee SCH 80 - Fitting only
L [in.] H [in.] i.d [in.]
3.75 3.50 0.85
3.75 3.70 1.06
4.30 4.00 1.33
4.40 4.30 1.67
5.00 4.60 1.91
5.50 5.00 2.40
1Pipe lengths included with these fittings do not satisfy straight-run requirements for all installation configurations.
L
o.d.
H
L
i.d.
H
272X
515
2537
2536
2551
56
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX
PVC-U Clamp-on Saddles SCH 80
Part No. Code No. Size [in.] Sensor Type
PV8S020 159 000 637 2.00 Flow -X0, pH -XX
PV8S025 159 000 638 2.50 Flow -X0, pH -XX
PV8S030 198 150 577 3.00 Flow -X0, pH -XX
PV8S040 198 150 578 4.00 Flow -X0
PV8S060 198 150 579 6.00 Flow -X1
PV8S080 159 000 639 8.00 Flow -X1
• For use with P51530-X2, 3-2536-X2, 3-2551-X2-XX
PVC-U Glue-on Saddle Fitting SCH 80
Part No. Code No. Size [in.] Sensor Type
PV8S100 159 000 695 10.00 Flow -X2
PV8S120 159 000 696 12.00 Flow -X2
PVC-U
Flow and pH
57
Saddle
PVC-U Clamp-on Saddles SCH 80
L [in.] H [in.] d [in.] C [in.]
4.00 5.0 2.375 1.43
4.75 5.4 2.875 1.43
5.00 6.0 3.500 1.43
5.00 7.1 4.500 1.43
5.00 10.0 6.625 2.25
5.00 11.5 8.625 2.25
• Mounts on PVC pipe• C - Clearance dimension• EPR (EPDM) O-ring
PVC-U Clamp-on Saddles SCH 80
W [in.] H [in.] o.d. [in.] C [in.]
9.0 5.43 10.75 2.25
9.0 5.15 12.75 2.25
PVC
-UP
VC-C
272X
515
2537
2536
2551
58
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
PVC-C Tees SCH 80 - Fitting Only
Part No. Code No. Size [in.] Sensor Type
MCPV8T005F 159 001 632 0.50 Flow -X0, pH -XX
MCPV8T007F 159 001 633 0.75 Flow -X0, pH -XX
MCPV8T010F 159 001 634 1.00 Flow -X0, pH -XX
MCPV8T012F 159 001 635 1.25 Flow -X0, pH -XX
MCPV8T015F 159 001 636 1.50 Flow -X0, pH -XX
MCPV8T020F 159 001 637 2.00 Flow -X0, pH -XX
PVC-C Tees SCH 80 - with Pipe
Part No. Code No. Size [in.] Sensor Type
MCPV8T005 159 001 641 0.50 Flow -X0, pH -XX
MCPV8T007 159 001 642 0.75 Flow -X0, pH -XX
MCPV8T010 159 001 643 1.00 Flow -X0, pH -XX
MCPV8T012 159 001 644 1.25 Flow -X0, pH -XX
MCPV8T015 159 001 645 1.50 Flow -X0, pH -XX
MCPV8T020 159 001 646 2.00 Flow -X0, pH -XX
PVC-C
Flow and pH
59
515
2537
2536
2551
272X
1Pipe lengths included with these fittings do not satisfy straight-run requirements for all installation configurations.
PVC-C Tees SCH 80 - Fitting only
L [in.] H [in.] i.d [in.]
3.75 3.50 0.85
3.75 3.70 1.06
4.30 4.00 1.33
4.40 4.30 1.67
5.00 4.60 1.91
5.50 5.00 2.40
PVC-C Tees SCH 80 - with Pipe1
L [in.] H [in.] o.d [in.]
14 3.50 0.84
14 3.70 1.05
17 4.00 1.32
20 4.30 1.66
24 4.60 1.90
26.5 5.02 2.38
Tee
PVC
-UP
VC-Ci.d.
H
L
o.d.
L
H
60
PP
Flow and pH
Type 310, PROGEF Standard, PP-H for Socket Fusion, metric
Part No.EPDM Code No.
FPM Code No.
DN [mm]
Sensor Type
PPMT005 727 310 006 727 310 036 15 Flow -X0, pH -XX
PPMT007 727 310 007 727 310 037 20 Flow -X0, pH -XX
PPMT010 727 310 008 727 310 038 25 Flow -X0, pH -XX
PPMT012 727 310 009 727 310 039 32 Flow -X0, pH -XX
PPMT015 727 310 010 727 310 040 40 Flow -X0, pH -XX
PPMT020 727 310 011 727 310 041 50 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on pg 139)
• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX/X2-XX• Sensor length depends on installation fitting
Type 311, PP-H, Wafer fitting, metric and inch
Part No.EPDM Code No.
FPM Code No.
d [in.]
DN [mm]
Sensor Type
PPMTE025 727 311 012 727 311 042 2.50 65 Flow -X1
PPMTE030 727 311 013 727 311 043 3.00 80 Flow -X1
PPMTE040 727 311 014 727 311 044 4.00 100 Flow -X1
727 311 015 727 311 045 4.00 100 Flow -X1
PPMTE050 727 311 016 727 311 046 5.00 125 Flow -X1
PPMTE060 727 311 017 727 311 047 6.00 150 Flow -X1
727 311 018 727 311 048 6.00 150 Flow -X1
727 311 019 727 311 049 8.00 200 Flow -X1
PPMTE080 727 311 020 727 311 050 8.00 200 Flow -X1
727 311 021 727 311 051 10.0 250 Flow -X2
PPMTE100 727 311 022 727 311 052 10.0 250 Flow -X2
PPMTE120 727 311 023 727 311 053 12.0 300 Flow -X2
61
Tee
Type 310, PROGEF Standard, PP-H for Socket Fusion, metric
PNd [mm]
D [mm]
Z [mm]
L [mm]
L1 [mm]
H [mm]
10 20 48 50 128 90 76
10 25 58 55 142 100 78
10 32 65 60 156 110 81
10 40 79 60 160 110 85
10 50 91 65 176 120 89
10 63 105 70 194 130 95 PP
• Threaded outlet 1¼ inch NPSM• Union end with fusion socket PP-H• FPM are generally stock items
272X
515
2537
2536
2551
WaferType 311, PP-H, Wafer fitting, metric and inch
PNd [mm]
D [mm]
H[mm]
L[mm]
L1 [mm]
16 75 88 133 48 61
16 90 102 140 48 69
16 110 132 145 48 79
16 125 132 144 48 79
16 140 157 149 48 94
16 160 182 156 48 106
16 180 182 163 48 106
16 200 236 170 48 134
16 225 236 178 48 134
16 250 289 263 48 160
16 280 289 273 48 160
16 315 329 285 48 185
d
G
• Threaded outlet 1¼ NPSM• Suitable for backing flanges metric and inch• Suitable for SDR 11 - SDR 17.6• Delivered with profile O-ring• Wafer can be used with other pipe materials• Sensor length depends on installation fitting
62
PVDF
Flow and pH
Type 311, SYGEF Standard, PVDF, metric & inch
Part No. FPM Code No.d [in.]
DN [mm]
Sensor Type
SFMTF025 735 311 042 2.50 65 Flow -X1
SFMTF030 735 311 043 3.00 80 Flow -X1
SFMTF040 735 311 044 4.00 100 Flow -X1
735 311 045 4.00 100 Flow -X1
SFMTF050 735 311 046 5.00 125 Flow -X1
SFMTF060 735 311 047 6.00 150 Flow -X1
735 310 049 8.00 200 Flow -X1
SFMTF080 735 311 050 8.00 200 Flow -X1
Type 310, SYGEF Standard, PVDF, Socket Fusion, metric
Part No. FPM Code No.DN [mm]
Sensor Type
SFMT005 735 310 036 15 Flow -X0, pH -XX
SFMT007 735 310 037 20 Flow -X0, pH -XX
SFMT010 735 310 038 25 Flow -X0, pH -XX
SFMT012 735 310 039 32 Flow -X0, pH -XX
SFMT015 735 310 040 40 Flow -X0, pH -XX
SFMT020 735 310 041 50 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting• To install this installation fitting in PVC-C, PP-R and PE pipes. Replace the original union ends by PVC-C, PP-R and PE union ends. (See table on pg 139)
• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX• Sensor length depends on installation fitting
63
Type 311, SYGEF Standard, PVDF, metric & inch
PNd [mm]
H [mm]
D [mm]
L [mm]
L1 [mm]
10/16 75 135 88 48 61
10/16 90 141 102 48 69
10/16 110 148 132 48 79
10/16 125 147 132 48 79
10/16 140 153 157 48 94
10/16 160 161 482 48 106
10/16 200 175 236 48 134
10/16 225 185 236 48 134
d
G
TeeType 310, SYGEF Standard, PVDF, Socket Fusion,
metric
PNd [mm]
D [mm]
Z [mm]
L [mm]
L1 [mm]
H [mm]
16 20 45 50 128 90 76
16 25 55 55 142 100 78
16 32m 62 60 156 110 81
16 40 75 60 160 110 85
16 50 84 65 176 120 89
16 63 101 70 194 130 95
Wafer
PVD
F
• Socket fusion equipment is required to install PVDF union tees• FPM O-rings• Sensor length depends on installation fitting
• Threaded outlet 1¼ inch NPSM• Suitable for backing flanges metric and inch• Delivered with profile O-ring• Wafer can be used with other pipe materials• Sensor length depends on installation fitting
272X
515
2537
2536
2551
64
Fibreglass
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
Fibreglass Glue-on Tees
Part No. Code No. Size [in.] Sensor Type
FPT015 159 000 446 1.50 Flow -X0, pH -XX
FPT020 159 000 447 2.00 Flow -X0, pH -XX
Fibreglass Glue-on Saddles
Part No. Code No. Size [in.] Sensor Type
FPS030 159 000 441 3.00 Flow -X0, pH -XX
FPS040 159 000 442 4.00 Flow -X0, pH -XX
FPS060 159 000 443 6.00 Flow -X1
FPS080 198 801 417 8.00 Flow -X1
FPS0100 159 000 444 10.00 Flow -X2
FPS0120 159 000 445 12.00 Flow -X2
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
65
• PVDF insert - all sizes• PTFE wetted material. Contact factory for available options
Fibreglass Glue-on Tees
L [in.] H [in.] i.d. [in.]
5.5 4.7 1.92
7.7 8.0 2.38
Fibreglass Glue-on Saddles
L [in.] H [in.] o.d. [in.] C [in.]
5.9 4.5 3.50 1.44
8.0 4.5 4.50 1.44
8.0 6.5 6.62 2.25
10.0 8.0 8.62 2.25
12.0 8.5 10.75 2.25
12.0 8.5 12.75 2.25
Saddle
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC• Mounts on fibreglass pipe• PTFE wetted material. Contact factory for available options.• Custom sizes available
H
L
i.d.
H C
L
Tee
Fibr
e-gl
ass
272X
515
2537
2536
2551
66
ABS
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX• Sensor length depends on installation fitting
Type 310, ABS, metric
Code No.d [mm]
DN [mm]
Sensor Type
729 310 007 25 20 Flow -X0, pH -XX
729 310 008 32 25 Flow -X0, pH -XX
729 310 009 40 32 Flow -X0, pH -XX
729 310 010 50 40 Flow -X0, pH -XX
729 310 011 63 50 Flow -X0, pH -XX
• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX• Sensor length depends on installation fitting
Type 312, ABS Glue-on saddle, metric
Code No.d [mm]
DN [mm]
Sensor Type
729 312 012 75 65 Flow -X1
729 312 013 90 80 Flow -X1
729 312 014 110 100 Flow -X1
729 312 016 140 125 Flow -X1
729 312 017 160 150 Flow -X1
729 312 019 200 200 Flow -X1
729 312 020 225 200 Flow -X1
67
AB
S
Saddle
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• With solvent cement socket metric
Type 310, ABS, metric
PNd [mm]
D [mm]
L[mm]
H[mm]
z[mm]
closest [inch]
10 25 35 100 78 32 0.75
10 32 44 110 81 33 1.00
10 40 51 110 85 29 1.25
10 50 63 120 89 29 1.50
10 63 78 130 95 28 2.00
• Threaded outlet 1¼ inch NPSM• Sensor length depends on installation fitting• Top saddle for solvent cement bonding
Type 312, ABS Glue-on saddle, metric
PNd [mm]
D [mm]
H[mm]
closest [inch]
10 75 38 91 2.50
10 90 38 91 3.00
10 110 38 91 4.00
10 140 38 81 5.00
10 160 38 77 6.00
10 200 38 71 8.00
10 225 38 67 8.00
Tee
272X
515
2537
2536
2551
68
Metals
Flow and pH
Carbon Steel Threaded Tees with NPT Threads
Part No. Code No. Size [in.] Sensor Type
CS4T005 198 801 459 0.50 Flow -X0, pH -XX
CS4T007 198 801 460 0.75 Flow -X0, pH -XX
CS4T010 198 801 461 1.00 Flow -X0, pH -XX
CS4T012 198 801 462 1.25 Flow -X0, pH -XX
CS4T015 198 801 419 1.50 Flow -X0, pH -XX
CS4T020 198 801 463 2.00 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
Copper Sweat-on Tee with PVDF insert
Part No. Code No. Size [in.] Sensor Type
CUKT005 198 801 687 0.50 Flow -X0, pH -XX
CUKT007 198 801 688 0.75 Flow -X0, pH -XX
CUKT010 198 801 689 1.00 Flow -X0, pH -XX
CUKT012 198 801 690 1.25 Flow -X0, pH -XX
CUKT015 198 801 691 1.50 Flow -X0, pH -XX
CUKT020 198 801 418 2.00 Flow -X0, pH -XX
Galvanized Iron Threaded Tee with NPT Threads and PVDF insert
Part No. Code No. Size [in.] Sensor Type
IR4T010 198 801 421 1.00 Flow -X0, pH -XX
IR4T012 198 801 422 1.25 Flow -X0, pH -XX
IR4T015 198 801 423 1.50 Flow -X0, pH -XX
IR4T020 198 801 424 2.00 Flow -X0, pH -XX
69
H
LNPT
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
• No insert up to 1 in., over 1 in. - PVDF insert• For use with copper pipe (SCH K)• PTFE wetted material. Contact factory for available options.
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
Carbon Steel Threaded Tees with NPT Threads
L [in.] H [in.]
3.6 4.0
3.6 4.2
3.6 4.2
3.8 4.5
4.1 4.8
4.9 5.3
Copper Sweat-on Tee with PVDF insert
L [in.] H [in.] i.d. [in.]
3.15 3.57 0.62
2.96 3.52 0.87
3.23 3.80 1.12
4.16 4.12 1.38
4.43 4.34 1.63
5.31 4.86 2.11
Galvanized Iron Threaded Tee with NPT Threads and PVDF insert
NPT L [in.] H [in.]
1.00 3.4 4.1
1.25 3.56 4.34
1.50 3.75 4.67
2.00 3.90 5.05
Tee
Met
als
272X
515
2537
2536
2551
70
Metals
Flow and pH
316 SS (1.4401) Threaded Tees with NPT Threads and PVDF insert
Part No. Code No. Size [in.] Sensor Type
CR4T005 198 801 554 0.50 Flow -X0, pH -XX
CR4T007 198 801 555 0.75 Flow -X0, pH -XX
CR4T010 198 801 556 1.00 Flow -X0, pH -XX
CR4T012 198 801 783 1.25 Flow -X0, pH -XX
CR4T015 198 801 784 1.50 Flow -X0, pH -XX
CR4T020 198 801 785 2.00 Flow -X0, pH -XX
Brass Threaded Tee with NPT Threads and PVDF insert
Part No. Code No. Size [in.] Sensor Type
BR4T010 198 801 770 1.00 Flow -X0, pH -XX
BR4T012 198 801 771 1.25 Flow -X0, pH -XX
BR4T015 198 801 772 1.50 Flow -X0, pH -XX
BR4T020 198 801 773 2.00 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
71
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
Brass Threaded Tee with NPT Threads and PVDF insert
NPT [in.] L [in.] H [in.]
1.00 3.36 4.09
1.25 3.42 4.42
1.50 3.46 4.70
2.00 3.68 5.19
316 SS (1.4401) Threaded Tees with NPT Threads and PVDF insert
L [in.] H [in.]
3.6 4.0
3.6 4.2
3.6 4.2
3.8 4.5
4.1 4.8
4.9 5.3
H
LNPT
Tee
Met
als
272X
515
2537
2536
2551
72
Metals
Flow and pH
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
Brass Brazolet with PVDF insert for use with copper pipe (SCH 40 ASTM)
Part No. Code No. Size [in.] Sensor Type
BR4B025 198 801 794 2.50 Flow -X0, pH-XX
BR4B030 198 801 795 3.00 Flow -X0, pH -XX
BR4B040 198 801 796 4.00 Flow -X0, pH -XX
BR4B050 198 801 797 5.00 Flow -X1
BR4B060 198 801 798 6.00 Flow -X1
BR4B080 198 801 799 8.00 Flow -X1
BR4B100 198 801 800 10.0 Flow -X2
BR4B120 198 801 801 12.0 Flow -X2
Carbon Steel Weld-on Weldolets for use with SCH 40 metal pipe (ASTM)
Part No. Code Size [in.] Sensor Type
CS4W025 198 801 464 2.50 Flow -X0, pH-XX
CS4W030 198 801 557 3.00 Flow -X0, pH -XX
CS4W040 198 801 552 4.00 Flow -X0, pH -XX
CS4W050 198 801 465 5.00 Flow -X1
CS4W060 198 801 553 6.00 Flow -X1
CS4W080 198 801 574 8.00 Flow -X1
CS4W100 198 801 575 10.0 Flow -X2
CS4W120 198 801 576 12.0 Flow -X2
73
Brass Brazolet with PVDF insert for use with cop-per pipe (SCH 40 ASTM)
W [in.] H [in.] C [in.]
2.50 2.48 1.31
2.50 2.47 1.31
2.50 2.45 1.31
3.50 3.24 2.10
3.50 3.11 2.10
3.50 2.88 2.10
3.50 5.63 2.10
3.50 5.40 2.10
Carbon Steel Weld-on Weldolets for use with SCH 40 metal pipe (ASTM)
W [in.] H [in.] C [in.]
2.60 2.48 1.31
2.60 2.47 1.31
2.60 2.45 1.31
3.50 3.24 2.10
3.50 3.11 2.10
3.50 2.88 2.10
3.50 5.63 2.10
3.50 5.40 2.10
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• PTFE wetted material. Contact factory for available options.
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• PTFE wetted material. Contact factory for available options.
Tee
Met
als
272X
515
2537
2536
2551
74
Metals
Flow and pH
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
Iron Strap-on Saddle for use with SCH 80 metal pipe (ASTM)
Part No. Code No. Size [in.] Sensor Type
IR8S020 198 801 425 2.00 Flow -X0, pH -XX
IR8S025 198 801 426 2.50 Flow -X0, pH -XX
IR8S030 198 801 427 3.00 Flow -X0, pH -XX
IR8S040 198 801 420 4.00 Flow -X0, pH -XX
IR8S050 198 801 429 5.00 Flow -X1
IR8S060 198 801 430 6.00 Flow -X1
IR8S080 198 801 431 8.00 Flow -X1
IR8S100 198 801 432 10.0 Flow -X2
IR8S120 198 801 433 12.0 Flow -X2
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
316 SS (1.4401) Weldolets with PVDF insert for use with SCH 40 metal pipe (ASTM)
Part No. Code No. Size [in.] Sensor Type
CR4W025 198 801 786 2.50 Flow -X0, pH -XX
CR4W030 198 801 787 3.00 Flow -X0, pH -XX
CR4W040 198 801 788 4.00 Flow -X0, pH -XX
CR4W050 198 801 789 5.00 Flow -X1
CR4W060 198 801 790 6.00 Flow -X1
CR4W080 198 801 791 8.00 Flow -X1
CR4W100 198 801 792 10.0 Flow -X2
CR4W120 198 801 793 12.0 Flow -X2
75
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• Buna-N O-ring• Larger sizes may be available and PTFE wetted material. Contact factory.
Iron Strap-on Saddle for use with SCH 80 metal pipe (ASTM)
H [in.]
o.d. min [in.]
o.d. max [in.]
C [in.]
5.5 2.35 2.56 1.44
5.5 2.44 2.91 1.44
6.5 2.97 3.54 1.44
7.5 3.74 4.55 2.25
9.0 4.74 5.63 2.25
10.5 5.94 6.70 2.25
12.0 7.69 8.72 2.25
18.0 10.64 12.12 2.25
20.0 12.62 14.32 2.25
• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• C - Clearance dimension• PTFE wetted material. Contact factory for available options.
316 SS (1.4401) Weldolets with PVDF insert for use with SCH 40 metal pipe (ASTM)
W [in.] H [in.] C [in.]
2.50 2.48 1.31
2.50 2.47 1.31
2.50 2.45 1.31
3.50 3.24 2.10
3.50 3.11 2.10
3.50 2.88 2.10
3.50 5.63 2.10
3.50 5.40 2.10
Tee
Met
als
272X
515
2537
2536
2551
76
• For use with P525-1 and P525-1S only
Metalex Socket Weld Mini-Tap (1.4401)
Part No. Code No. DN [mm] Size [in.] Sensor Type
P526-2005 198 840 501 15 0.50 P525-1, -1S
P526-2007 198 840 502 20 0.75 P525-1, -1S
P526-2010 198 840 503 25 1.00 P525-1, -1S
• For use with P525-2 and P525-2S only
Metalex Weld-on Mini-Tap (1.4401)
Part No. Code No. Size [in.] Sensor Type
P526-2012 159 000 494 1.25 P525-2, -2S
P526-2015 198 840 506 1.50 P525-2, -2S
P526-2020 159 000 495 2.00 P525-2, -2S
P526-2025 159 000 496 2.50 P525-2, -2S
P526-2030 159 000 497 3.00 P525-2, -2S
P526-2040 159 000 498 4.00 P525-2, -2S
P526-2050 159 000 499 5.00 P525-2, -2S
P526-2060 159 000 500 6.00 P525-2, -2S
P526-2080 159 000 501 8.00 P525-2, -2S
P526-2100 159 000 502 10.00 P525-2, -2S
P526-2120 159 000 503 12.00 P525-2, -2S
Metalex Strap-on Saddle (1.4401)
Part No. Code No. Size [in.] Sensor Type
P526-1020 159 000 484 2.00 P525-3, -3S
P526-1025 159 000 485 2.50 P525-3, -3S
P526-1030 159 000 486 3.00 P525-3, -3S
P526-1040 159 000 487 4.00 P525-3, -3S
P526-1050 159 000 488 5.00 P525-3, -3S
P526-1060 159 000 489 6.00 P525-3, -3S
P526-1080 159 000 490 8.00 P525-3, -3S
P526-1100 159 000 491 10.00 P525-3, -3S
P526-1120 159 000 492 12.00 P525-3, -3S
• For use with P525-3 and P525-3S only
Metals
Flow and pH
77
525
• For use with SS pipe
Metalex Socket Weld Mini-Tap (1.4401)D [mm]
H [mm]
L [in.]
W [in.]
H [in.]
i.d. [in.]
21.8 8.4 2.0 2.4 3.0 0.85
27.2 12.7 2.0 2.4 3.0 1.06
33.9 12.7 2.0 2.4 3.0 1.325
• For use with SS pipe• Gasket Klinger C4401 Thermoseal
Metalex Weld-on Mini-Tap (1.4401)
W [in.] H [in.] C [in.]
1.66 2.25 1.26
1.66 2.20 1.26
1.66 2.17 1.26
1.66 2.10 1.26
1.66 2.00 1.26
1.66 1.95 1.26
1.66 1.83 1.26
1.66 1.75 1.26
1.66 1.56 1.26
1.66 1.35 1.26
1.66 1.15 1.26
Metalex Strap-on Saddle (1.4401)W [in.]
H [in.]
o.d. min [in.]
o.d. max [in.]
5.5 7.0 2.35 2.56
5.5 7.0 2.44 2.91
6.0 7.5 2.97 3.54
7.0 8.0 3.74 4.55
8.0 10.0 4.74 5.63
9.5 10.5 5.94 6.70
12.0 12.75 7.69 8.72
15.0 14.5 10.64 12.12
17.0 17.0 12.62 14.32
• For use with SS pipe
W
H
o.d.
H
CW
Weld-on mini-tap
75D
DN
H
61
49
i.d.H
W
L
Met
als
78
Metals
Flow and Other Sensors
• Ready to install, studs and nuts in one package• Do not use these fittings for PE pipes
Multi/Saddle Plus Spatula for use with Iron Multi/Saddle Plus 201
Code No. Description
709 613 904 Spatula for saddle outlet 1¼ inch
709 613 905 Spatula for saddle outlet 1½ inch / d40 + d50
• Do not use these fittings for PE pipes
Multi/Saddle Straps for use with Iron Multi/Saddle Plus 201
Code No. Strap Range [in.] DN min [mm]
DN max [mm]
709 613 930 2.375 3.25 60 80
709 613 932 2.75 3.625 70 90
709 613 934 3.625 4.375 90 110
709 613 936 4.375 5.25 110 130
709 613 938 5.25 6.00 130 150
709 613 940 5.75 6.625 145 165
709 613 942 6.375 7.25 160 180
709 613 944 7.00 7.75 175 195
709 613 946 7.625 8.375 190 210
709 613 948 8.25 9.00 205 225
709 613 950 8.75 9.625 220 240
709 613 952 9.375 10.25 235 255
709 613 954 10.00 10.75 250 270
709 613 956 10.75 11.625 270 290
709 613 958 11.375 12.25 285 305
709 613 960 12.00 12.75 300 320
709 613 962 12.625 13.375 315 335
709 613 964 13.375 14.25 335 355
• For use with 3-2552-2X/-3X, 3-2540-XX, 3-3719-11 Wet-Tap assembly with the 3-275X-WTX Wet-Tap electrode• Do not use these fittings for PE pipes• 1½ and 2 inch saddles must be applied for pipes DN80 or larger
Iron Multi/Saddle Plus 201
EPDM Code NBR Code Inch PN Water
PNGas Sensor Type
709 613 736 709 613 836 1.25 16.0 5.0 2552-2
709 613 738 709 613 838 1.50 16.0 5.0 2552-3, 2540-XX, 3719-11
79
3719
2552
2540
Met
als
Multi/Saddle
Hot Tap Adaptor Multi/Saddle Plus 201
Code No. Inch
709 613 638 1½
80
ElectrofusionFlow and pH
Electrofusion for PE pipes: Transition Saddles with Stainless 1¼ inch Outlet
Part No. Size [in.] Sensor Type
10004673 2.0 2552-1
10004686 3.0 2552-1
10004700 4.0 2552-1
10004717 6.0 2552-1
10004740 8.0 2552-1
Special request 10.0 2552-1 or -2
Special request 12.0 2552-1 or -2
1½ inch outlet
10004676 2.0 2552-3, 2540-XX, 3719-11
10004689 3.0 2552-3, 2540-XX, 3719-11
10004703 4.0 2552-3, 2540-XX, 3719-11
10004720 6.0 2552-3, 2540-XX, 3719-11
10004743 8.0 2552-3, 2540-XX, 3719-11
Special request 10.0 2552-3, 2540-XX, 3719-11
Special request 12.0 2552-3, 2540-XX, 3719-11
• Transition saddle with 1¼ FNPT branch/outlet• Transition saddle with 1½ FNPT branch/outlet• These fittings are only available from your local Georg Fischer sales office
81
3719
2552
2540
Electrofusion
Electrofusion for PE pipes: Transition Saddles with Stainless Outlet
L [in.] H [in.] d [in.]
3.6 3.18 N/A
4.6 3.18 N/A
6.26 3.8 N/A
8.68 4.96 N/A
5.92 2.96 N/A
Call Call N/A
Call Call N/A
3.6 3.18 N/A
4.6 3.18 N/A
6.26 3.8 N/A
8.68 4.96 N/A
5.92 2.96 N/A
Call Call N/A
Call Call N/A Elec
tro-
Fusi
on
82
Material Fitting Joint Gasket Dimension Sensor Type Pressure Temperature Page
PVC
Solvent Cementing FPM 0.50 - 2.0 in. Flow, pH max. 16 bar 0 °C – +60 °C 84
Solvent Cementing no gasket 0.50 - 2.0 in. Flow, pH max. 13.8 bar 0 °C – +60 °C 86
Hot gas back welding no gasket 0.50 - 2.0 in. Flow, pH max. 12.6 bar 0 °C – +60 °C 86
Clamp-on saddle EPDM 2.0 - 8.0 in. Flow, pH max. 12.6 bar 0 °C – +60 °C 88
Glue-on saddle no gasket 10 - 12 in. Flow max. 16 bar 0 °C – +60 °C 88
CP
VC
Solvent Cementing no gasket 0.50 - 2.0 in. Flow, pH max. 13.8 bar 0 °C – +100 °C 90
Solvent Cementing no gasket 0.50 - 2.0 in. Flow, pH max. 13.8 bar 0 °C – +100 °C 90
PP
Socket Fusion EPDM/FPM d20 - d63 Flow, pH max. 16 bar -10 °C – +95 °C 92
Flange adapters EPDM/FPM d75 - d315 Flow max. 16 bar -10 °C – +95 °C 92
PVD
F
Flange adapters FPM d75 - d225 Flow max. 16 bar -20 °C – +140 °C 94
Socket fusion FPM d20 - d63 Flow, pH max. 16 bar -20 °C – +140 °C 94
Fibe
rgla
ss
Solvent cementing PVDF insert 1.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C - +100 °C 96
Solvent cementing
PVDF insert to 8 in., PVC insert over 8 in.
3.0 - 12.0 in. Flow, pH3 in. max. 10.3 bar4-8 in. max. 6.9 bar10-12 in. max. 5.2 bar
3”-8” -15 °C - +100 °C10, 12” -15 °C - +65 °C 96
Table of Contents
USA Fittings
83
Material Fitting Joint Gasket Dimension Sensor Type Pressure Temperature Page
Met
als
NPT threadedPVDF insert up to 8 in.PVC insert over 8 in.
0.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C – +100 °C 98
Sweat on
No insert up to 1 in.PVDF insert over 1 in.
0.50 - 1.50 in. Flow, pH max. 13.8 bar 0 °C – +60 °C 98
NPT threaded no gasket/PVDF insert 1.0 - 2.0 in Flow, pH max. 13.8 bar -15 °C – +100 °C 98
NPT threaded PVDF insert 0.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C – +100 °C 100
NPT threaded PVDF insert 1.0 - 2.0 in Flow, pH – – 100
Weld-on
PVDF insert up to 8 in.PVC insert over 8 in.
2.5 - 12.0 in. Flow, pH max. 13.8 bar -15 °C – +100 °C 102
Braze
PVDF insert up to 8 in.PVC insert over 8 in.
2.5 - 12.0 in Flow, pH – – 102
Weld-on
PVDF insert up to 8 in.PVC insert over 8 in.
2.5 - 12 in. Flow, pH max. 13.8 bar -15 °C - +100 °C 104
Strap-on
Buna-N/PVDF insert up to 8 in.PVC insert over 8 in.
0.50 - 2.0 in. Flow, pH max. 13.8 bar -15 °C - +100 °C 104
Socket weld-on to SS pipe – 0.50 - 1.0 in
525-1, 525-1S only
– – 106
Weld-on toSS pipe
Klinger C4401 Thermoseal 1.25 - 12.0 in
525-2, 525-2S only
– – 106
Strap-on Buna-N 2.0 - 12.0 in.525-3, 525-3S only
– – 106
Strap-on EPDM/NBR d60 - d355 Other max. 16 bar – 108
Elec
trof
usio
n
– – – – – – 110
USA
USA
84
PVC
Flow and pH
Type 310, PVC for Socket Systems ASTM inch
EPDM Code No.
FPM Code No.
d [in.]
DN [mm]
Sensor Type
721 310 406 721 310 436 ½ in. 15 mm Flow -X0, pH -XX
721 310 407 721 310 437 ¾ in. 20 mm Flow -X0, pH -XX
721 310 408 721 310 438 1 in. 25 mm Flow -X0, pH -XX
721 310 409 721 310 439 1¼ in. 32 mm Flow -X0, pH -XX
721 310 410 721 310 440 1½ in. 40 mm Flow -X0, pH -XX
721 310 411 721 310 441 2 in. 50 mm Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0, 3-272X-XX• These fittings are only available from your local Georg Fischer sales office
85
Tee
PVC
CP
VC
Type 310, PVC for Socket Systems ASTM inch
PND [mm]
z [mm]
L [mm]
L1 [mm]
H [mm]
16 43 48 140 90 76
16 51 53 156 100 78
16 58 58 174 110 81
16 72 58 180 110 85
16 83 63 196 120 89
16 100 68 212 130 95
272X
515
2537
2536
2551
86
PVC
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
PVC Tee SCH 80 - Fitting Only
Part No. Code No. Size [in.] Sensor Type
MPV8T005F 159 001 614 0.50 Flow -X0, pH -XX
MPV8T007F 159 001 615 0.75 Flow -X0, pH -XX
MPV8T010F 159 001 616 1.00 Flow -X0, pH -XX
MPV8T012F 159 001 617 1.25 Flow -X0, pH -XX
MPV8T015F 159 001 618 1.50 Flow -X0, pH -XX
MPV8T020F 159 001 619 2.00 Flow -X0, pH -XX
PVC Tee SCH 80 - with Pipe
Part No. Code No. Size [in.] Sensor Type
MPV8T005 159 001 623 0.50 Flow -X0, pH -XX
MPV8T007 159 001 624 0.75 Flow -X0, pH -XX
MPV8T010 159 001 625 1.00 Flow -X0, pH -XX
MPV8T012 159 001 626 1.25 Flow -X0, pH -XX
MPV8T015 159 001 627 1.50 Flow -X0, pH -XX
MPV8T020 159 001 628 2.00 Flow -X0, pH -XX
87
Tee
PVC Tee SCH 80 - with Pipe1
L [in.] H [in.] o.d [in.]
14 3.50 0.84
14 3.70 1.05
17 4.00 1.32
20 4.30 1.66
24 4.60 1.90
26.5 5.02 2.38
PVC Tee SCH 80 - Fitting only
L [in.] H [in.] i.d [in.]
3.75 3.50 0.85
3.75 3.70 1.06
4.30 4.00 1.33
4.40 4.30 1.67
5.00 4.60 1.91
5.50 5.00 2.40
1Pipe lengths included with these fittings do not satisfy straight-run requirements for all installation configurations.
PVC
CP
VC
L
o.d.
H
L
i.d.
H
272X
515
2537
2536
2551
88
PVC
Flow and pH
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX
PVC Clamp-on Saddles SCH 80
Part No. Code No. Size [in.] Sensor Type
PV8S020 159 000 637 2.00 Flow -X0, pH -XX
PV8S025 159 000 638 2.50 Flow -X0, pH -XX
PV8S030 198 150 577 3.00 Flow -X0, pH -XX
PV8S040 198 150 578 4.00 Flow -X0
PV8S060 198 150 579 6.00 Flow -X1
PV8S080 159 000 639 8.00 Flow -X1
• For use with P51530-X2, 3-2536-X2, 3-2551-X2-XX
PVC Glue-on Saddle Fitting SCH 80
Part No. Code No. Size [in.] Sensor Type
PV8S100 159 000 695 10.00 Flow -X2
PV8S120 159 000 696 12.00 Flow -X2
89
Saddle
PVC Clamp-on Saddles SCH 80
L [in.] H [in.] d [in.] C [in.]
4.00 5.0 2.375 1.43
4.75 5.4 2.875 1.43
5.00 6.0 3.500 1.43
5.00 7.1 4.500 1.43
5.00 10.0 6.625 2.25
5.00 11.5 8.625 2.25
• Mounts on PVC pipe• C - Clearance dimension• EPR (EPDM) O-ring
PVC Clamp-on Saddles SCH 80
W [in.] H [in.] o.d. [in.] C [in.]
9.0 5.43 10.75 2.25
9.0 5.15 12.75 2.25P
VCC
PVC
272X
515
2537
2536
2551
90
CPVC
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
PVC-C Tees SCH 80 - Fitting Only
Part No. Code No. Size [in.] Sensor Type
MCPV8T005F 159 001 632 0.50 Flow -X0, pH -XX
MCPV8T007F 159 001 633 0.75 Flow -X0, pH -XX
MCPV8T010F 159 001 634 1.00 Flow -X0, pH -XX
MCPV8T012F 159 001 635 1.25 Flow -X0, pH -XX
MCPV8T015F 159 001 636 1.50 Flow -X0, pH -XX
MCPV8T020F 159 001 637 2.00 Flow -X0, pH -XX
PVC-C Tees SCH 80 - with Pipe
Part No. Code No. Size [in.] Sensor Type
MCPV8T005 159 001 641 0.50 Flow -X0, pH -XX
MCPV8T007 159 001 642 0.75 Flow -X0, pH -XX
MCPV8T010 159 001 643 1.00 Flow -X0, pH -XX
MCPV8T012 159 001 644 1.25 Flow -X0, pH -XX
MCPV8T015 159 001 645 1.50 Flow -X0, pH -XX
MCPV8T020 159 001 646 2.00 Flow -X0, pH -XX
91
272X
PVC
CP
VC
515
2537
2536
2551
1Pipe lengths included with these fittings do not satisfy straight-run requirements for all installation configurations.
PVC-C Tees SCH 80 - Fitting only
L [in.] H [in.] i.d [in.]
3.75 3.50 0.85
3.75 3.70 1.06
4.30 4.00 1.33
4.40 4.30 1.67
5.00 4.60 1.91
5.50 5.00 2.40
PVC-C Tees SCH 80 - with Pipe1
L [in.] H [in.] o.d [in.]
14 3.50 0.84
14 3.70 1.05
17 4.00 1.32
20 4.30 1.66
24 4.60 1.90
26.5 5.02 2.38
Tee
i.d.
H
L
o.d.
L
H
92
PP
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
Type 310, PROGEF Standard, PP-H for Socket Fusion, metric
Part No.EPDM Code No.
FPM Code No.
DN [mm]
Sensor Type
PPMT005 727 310 006 727 310 036 15 Flow -X0, pH -XX
PPMT007 727 310 007 727 310 037 20 Flow -X0, pH -XX
PPMT010 727 310 008 727 310 038 25 Flow -X0, pH -XX
PPMT012 727 310 009 727 310 039 32 Flow -X0, pH -XX
PPMT015 727 310 010 727 310 040 40 Flow -X0, pH -XX
PPMT020 727 310 011 727 310 041 50 Flow -X0, pH -XX
• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX/X2-XX
Type 311, PP-H, Wafer fitting, metric and inch
Part No.EPDM Code No.
FPM Code No.
d [in.]
DN [mm]
Sensor Type
PPMTE025 727 311 012 727 311 042 2.50 65 Flow -X1
PPMTE030 727 311 013 727 311 043 3.00 80 Flow -X1
PPMTE040 727 311 014 727 311 044 4.00 100 Flow -X1
727 311 015 727 311 045 4.00 100 Flow -X1
PPMTE050 727 311 016 727 311 046 5.00 125 Flow -X1
PPMTE060 727 311 017 727 311 047 6.00 150 Flow -X1
727 311 018 727 311 048 6.00 150 Flow -X1
727 311 019 727 311 049 8.00 200 Flow -X1
PPMTE080 727 311 020 727 311 050 8.00 200 Flow -X1
727 311 021 727 311 051 10.0 250 Flow -X2
PPMTE100 727 311 022 727 311 052 10.0 250 Flow -X2
PPMTE120 727 311 023 727 311 053 12.0 300 Flow -X2
93
Tee
Type 310, PROGEF Standard, PP-H for Socket Fusion, metric
PNd [mm]
D [mm]
Z [mm]
L [mm]
L1 [mm]
H [mm]
10 20 48 50 128 90 76
10 25 58 55 142 100 78
10 32 65 60 156 110 81
10 40 79 60 160 110 85
10 50 91 65 176 120 89
10 63 105 70 194 130 95
• Threaded outlet 1¼ inch NPSM• Union end with fusion socket PP-H
PP
272X
515
2537
2536
2551
Wafer
Type 311, PP-H, Wafer fitting, metric and inch
PNd [mm]
D [mm]
H[mm]
L[mm]
L1 [mm]
16 75 88 133 48 61
16 90 102 140 48 69
16 110 132 145 48 79
16 125 132 144 48 79
16 140 157 149 48 94
16 160 182 156 48 106
16 180 182 163 48 106
16 200 236 170 48 134
16 225 236 178 48 134
16 250 289 263 48 160
16 280 289 273 48 160
16 315 329 285 48 185
d
G
• Threaded outlet 1¼ NPSM• Suitable for backing flanges metric and inch• Suitable for SDR 11 - SDR 17.6• Delivered with profile O-ring• Wafer can be used with other pipe materials
94
PVDF
Flow and pH
• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX
Type 311, SYGEF Standard, metric and inch
Part No. FPM Code No.d [in.]
DN [mm]
Sensor Type
SFMTF025 735 311 042 2.50 65 Flow -X1
SFMTF030 735 311 043 3.00 80 Flow -X1
SFMTF040 735 311 044 4.00 100 Flow -X1
735 311 045 4.00 100 Flow -X1
SFMTF050 735 311 046 5.00 125 Flow -X1
SFMTF060 735 311 047 6.00 150 Flow -X1
735 310 049 8.00 200 Flow -X1
SFMTF080 735 311 050 8.00 200 Flow -X1
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
Type 310, SYGEF Standard, PVDF, metric
Part No. FPM Code No.DN [mm]
Sensor Type
SFMT005 735 310 036 15 Flow -X0, pH -XX
SFMT007 735 310 037 20 Flow -X0, pH -XX
SFMT010 735 310 038 25 Flow -X0, pH -XX
SFMT012 735 310 039 32 Flow -X0, pH -XX
SFMT015 735 310 040 40 Flow -X0, pH -XX
SFMT020 735 310 041 50 Flow -X0, pH -XX
95
Type 311, SYGEF Standard, metric and inch
PNd [mm]
H [mm]
D [mm]
L [mm]
L1 [mm]
10/16 75 135 88 48 61
10/16 90 141 102 48 69
10/16 110 148 132 48 79
10/16 125 147 132 48 79
10/16 140 153 157 48 94
10/16 160 161 482 48 106
10/16 200 175 236 48 134
10/16 225 185 236 48 134
d
G
• Threaded outlet 1¼ inch NPSM• Suitable for backing flanges metric and inch• Delevered with profile O-ring• Wafer can be used with other pipe materials
Tee
• Socket fusion equipment is required to install PVDF union tees• FPM O-rings
Type 310, SYGEF Standard, PVDF, metric
PNd [mm]
D [mm]
Z [mm]
L [mm]
L1 [mm]
H [mm]
16 20 45 50 128 90 76
16 25 55 55 142 100 78
16 32 62 60 156 110 81
16 40 75 60 160 110 85
16 50 84 65 176 120 89
16 63 101 70 194 130 95
Wafer
PVD
F
272X
515
2537
2536
2551
96
Fiberglass
Flow and pH
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
Fiberglass Glue-on Tees
Part No. Code No. Size [in.] Sensor Type
FPT015 159 000 446 1.50 Flow -X0, pH -XX
FPT020 159 000 447 2.00 Flow -X0, pH -XX
Fiberglass Glue-on Saddles
Part No. Code No. Size [in.] Sensor Type
FPS030 159 000 441 3.00 Flow -X0, pH -XX
FPS040 159 000 442 4.00 Flow -X0, pH -XX
FPS060 159 000 443 6.00 Flow -X1
FPS080 198 801 417 8.00 Flow -X1
FPS0100 159 000 444 10.00 Flow -X2
FPS0120 159 000 445 12.00 Flow -X2
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
97
• PVDF insert - all sizes• PTFE wetted material. Contact factory for available options
Fiberglass Glue-on Tees
L [in.] H [in.] i.d. [in.]
5.5 4.7 1.92
7.7 8.0 2.38
Fiberglass Glue-on Saddles
L [in.] H [in.] o.d. [in.] C [in.]
5.9 4.5 3.50 1.44
8.0 4.5 4.50 1.44
8.0 6.5 6.62 2.25
10.0 8.0 8.62 2.25
12.0 8.5 10.75 2.25
12.0 8.5 12.75 2.25
Saddle
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC• Mounts on fiberglass pipe• PTFE wetted material. Contact factory for available options.• Custom sizes available
H
L
i.d.
H C
L
Tee
Fibe
r-gl
ass
272X
515
2537
2536
2551
98
Metals
Flow and pH
Carbon Steel Threaded Tees with NPT Threads
Part No. Code No. Size [in.] Sensor Type
CS4T005 198 801 459 0.50 Flow -X0, pH -XX
CS4T007 198 801 460 0.75 Flow -X0, pH -XX
CS4T010 198 801 461 1.00 Flow -X0, pH -XX
CS4T012 198 801 462 1.25 Flow -X0, pH -XX
CS4T015 198 801 419 1.50 Flow -X0, pH -XX
CS4T020 198 801 463 2.00 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
Copper Sweat-on Tee with PVDF insert
Part No. Code No. Size [in.] Sensor Type
CUKT005 198 801 687 0.50 Flow -X0, pH -XX
CUKT007 198 801 688 0.75 Flow -X0, pH -XX
CUKT010 198 801 689 1.00 Flow -X0, pH -XX
CUKT012 198 801 690 1.25 Flow -X0, pH -XX
CUKT015 198 801 691 1.50 Flow -X0, pH -XX
CUKT020 198 801 418 2.00 Flow -X0, pH -XX
Galvanized Iron Threaded Tee with NPT Threads and PVDF insert
Part No. Code No. Size [in.] Sensor Type
IR4T010 198 801 421 1.00 Flow -X0, pH -XX
IR4T012 198 801 422 1.25 Flow -X0, pH -XX
IR4T015 198 801 423 1.50 Flow -X0, pH -XX
IR4T020 198 801 424 2.00 Flow -X0, pH -XX
99
H
LNPT
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
• No insert up to 1 in., over 1 in. - PVDF insert• For use with copper pipe (SCH K)• PTFE wetted material. Contact factory for available options.
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
Carbon Steel Threaded Tees with NPT Threads
L [in.] H [in.]
3.6 4.0
3.6 4.2
3.6 4.2
3.8 4.5
4.1 4.8
4.9 5.3
Copper Sweat-on Tee with PVDF insert
L [in.] H [in.] i.d. [in.]
3.15 3.57 0.62
2.96 3.52 0.87
3.23 3.80 1.12
4.16 4.12 1.38
4.43 4.34 1.63
5.31 4.86 2.11
Galvanized Iron Threaded Tee with NPT Threads and PVDF insert
NPT L [in.] H [in.]
1.00 3.4 4.1
1.25 3.56 4.34
1.50 3.75 4.67
2.00 3.90 5.05
Tee
Met
als272X
515
2537
2536
2551
100
Metals
Flow and pH
316 SS (1.4401) Threaded Tees with NPT Threads with PVDF insert
Part No. Code No. Size [in.] Sensor Type
CR4T005 198 801 554 0.50 Flow -X0, pH -XX
CR4T007 198 801 555 0.75 Flow -X0, pH -XX
CR4T010 198 801 556 1.00 Flow -X0, pH -XX
CR4T012 198 801 783 1.25 Flow -X0, pH -XX
CR4T015 198 801 784 1.50 Flow -X0, pH -XX
CR4T020 198 801 785 2.00 Flow -X0, pH -XX
Brass Threaded Tee with NPT Threads and PVDF insert
Part No. Code No. Size [in.] Sensor Type
BR4T010 198 801 770 1.00 Flow -X0, pH -XX
BR4T012 198 801 771 1.25 Flow -X0, pH -XX
BR4T015 198 801 772 1.50 Flow -X0, pH -XX
BR4T020 198 801 773 2.00 Flow -X0, pH -XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
101
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
• PVDF insert - all sizes• For use with SCH 40 metal pipe (ASTM)• PTFE wetted material. Contact factory for available options.
Brass Threaded Tee with NPT Threads and PVDF insert
NPT [in.] L [in.] H [in.]
1.00 3.36 4.09
1.25 3.42 4.42
1.50 3.46 4.70
2.00 3.68 5.19
316 SS (1.4401) Threaded Tees with NPT Threads with PVDF insert
L [in.] H [in.]
3.6 4.0
3.6 4.2
3.6 4.2
3.8 4.5
4.1 4.8
4.9 5.3
H
LNPT
Tee
Met
als272X
515
2537
2536
2551
102
Metals
Flow and pH
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
Brass Brazolet with PVDF insert for use with copper pipe (SCH 40 ASTM)
Part No. Code No. Size [in.] Sensor Type
BR4B025 198 801 794 2.50 Flow -X0, pH-XX
BR4B030 198 801 795 3.00 Flow -X0, pH -XX
BR4B040 198 801 796 4.00 Flow -X0, pH -XX
BR4B050 198 801 797 5.00 Flow -X1
BR4B060 198 801 798 6.00 Flow -X1
BR4B080 198 801 799 8.00 Flow -X1
BR4B100 198 801 800 10.0 Flow -X2
BR4B120 198 801 801 12.0 Flow -X2
Carbon Steel Weld-on Weldolets for use with SCH 40 metal pipe (ASTM)
Part No. Code No. Size [in.] Sensor Type
CS4W025 198 801 464 2.50 Flow -X0, pH-XX
CS4W030 198 801 557 3.00 Flow -X0, pH -XX
CS4W040 198 801 552 4.00 Flow -X0, pH -XX
CS4W050 198 801 465 5.00 Flow -X1
CS4W060 198 801 553 6.00 Flow -X1
CS4W080 198 801 574 8.00 Flow -X1
CS4W100 198 801 575 10.0 Flow -X2
CS4W120 198 801 576 12.0 Flow -X2
103
Brass Brazolet with PVDF insert for use with cop-per pipe (SCH 40 ASTM)
W [in.] H [in.] C [in.]
2.50 2.48 1.31
2.50 2.47 1.31
2.50 2.45 1.31
3.50 3.24 2.10
3.50 3.11 2.10
3.50 2.88 2.10
3.50 5.63 2.10
3.50 5.40 2.10
Carbon Steel Weld-on Weldolets for use with SCH 40 metal pipe (ASTM)
W [in.] H [in.] C [in.]
2.60 2.48 1.31
2.60 2.47 1.31
2.60 2.45 1.31
3.50 3.24 2.10
3.50 3.11 2.10
3.50 2.88 2.10
3.50 5.63 2.10
3.50 5.40 2.10
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• PTFE wetted material. Contact factory for available options.
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• PTFE wetted material. Contact factory for available options.
Tee
Met
als272X
515
2537
2536
2551
104
Metals
Flow and pH
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
Iron Strap-on Saddle for use with SCH 80 metal pipe (ASTM)
Part No. Code No. Size [in.] Sensor Type
IR8S020 198 801 425 2.00 Flow -X0, pH -XX
IR8S025 198 801 426 2.50 Flow -X0, pH -XX
IR8S030 198 801 427 3.00 Flow -X0, pH -XX
IR8S040 198 801 420 4.00 Flow -X0, pH -XX
IR8S050 198 801 429 5.00 Flow -X1
IR8S060 198 801 430 6.00 Flow -X1
IR8S080 198 801 431 8.00 Flow -X1
IR8S100 198 801 432 10.0 Flow -X2
IR8S120 198 801 433 12.0 Flow -X2
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
316 SS (1.4401) Weldolets with PVDF insert for use with SCH 40 metal pipe (ASTM)
Part No. Code No. Size [in.] Sensor Type
CR4W025 198 801 786 2.50 Flow -X0, pH -XX
CR4W030 198 801 787 3.00 Flow -X0, pH -XX
CR4W040 198 801 788 4.00 Flow -X0, pH -XX
CR4W050 198 801 789 5.00 Flow -X1
CR4W060 198 801 790 6.00 Flow -X1
CR4W080 198 801 791 8.00 Flow -X1
CR4W100 198 801 792 10.0 Flow -X2
CR4W120 198 801 793 12.0 Flow -X2
105
• C - Clearance dimension• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• Buna-N O-ring• Larger sizes may be available and PTFE wetted material. Contact factory.
Iron Strap-on Saddle for use with SCH 80 metal pipe (ASTM)
H [in.]
o.d. min [in.]
o.d. max [in.]
C [in.]
5.5 2.35 2.56 1.44
5.5 2.44 2.91 1.44
6.5 2.97 3.54 1.44
7.5 3.74 4.55 2.25
9.0 4.74 5.63 2.25
10.5 5.94 6.70 2.25
12.0 7.69 8.72 2.25
18.0 10.64 12.12 2.25
20.0 12.62 14.32 2.25
• Up to 8 in. - PVDF insert, over 8 in. - PVC insert• C - Clearance dimension• PTFE wetted material. Contact factory for available options.
316 SS (1.4401) Weldolets with PVDF insert for use with SCH 40 metal pipe (ASTM)
W [in.] H [in.] C [in.]
2.50 2.48 1.31
2.50 2.47 1.31
2.50 2.45 1.31
3.50 3.24 2.10
3.50 3.11 2.10
3.50 2.88 2.10
3.50 5.63 2.10
3.50 5.40 2.10
Tee
Saddle
Met
als272X
515
2537
2536
2551
106
• For use with P525-3 and P525-3S only
Metals
Flow and pH
• For use with P525-1 and P525-1S only
Metalex Socket Weld Mini-Tap (1.4401)
Part No. Code No. DN [mm] Size [in.] Sensor Type
P526-2005 198 840 501 15 0.50 P525-1, -1S
P526-2007 198 840 502 20 0.75 P525-1, -1S
P526-2010 198 840 503 25 1.00 P525-1, -1S
• For use with P525-2 and P525-2S only
Metalex Weld-on Mini-Tap (1.4401)
Part No. Code No. Size [in.] Sensor Type
P526-2012 159 000 494 1.25 P525-2, -2S
P526-2015 198 840 506 1.50 P525-2, -2S
P526-2020 159 000 495 2.00 P525-2, -2S
P526-2025 159 000 496 2.50 P525-2, -2S
P526-2030 159 000 497 3.00 P525-2, -2S
P526-2040 159 000 498 4.00 P525-2, -2S
P526-2050 159 000 499 5.00 P525-2, -2S
P526-2060 159 000 500 6.00 P525-2, -2S
P526-2080 159 000 501 8.00 P525-2, -2S
P526-2100 159 000 502 10.00 P525-2, -2S
P526-2120 159 000 503 12.00 P525-2, -2S
Metalex Strap-on Saddle (1.4401)
Part No. Code No. Size [in.] Sensor Type
P526-1020 159 000 484 2.00 P525-3, -3S
P526-1025 159 000 485 2.50 P525-3, -3S
P526-1030 159 000 486 3.00 P525-3, -3S
P526-1040 159 000 487 4.00 P525-3, -3S
P526-1050 159 000 488 5.00 P525-3, -3S
P526-1060 159 000 489 6.00 P525-3, -3S
P526-1080 159 000 490 8.00 P525-3, -3S
P526-1100 159 000 491 10.00 P525-3, -3S
P526-1120 159 000 492 12.00 P525-3, -3S
107
525
• For use with SS pipe
Metalex Socket Weld Mini-Tap (1.4401)D [mm]
H [mm]
L [in.]
W [in.]
H [in.]
i.d. [in.]
21.8 8.4 2.0 2.4 3.0 0.85
27.2 12.7 2.0 2.4 3.0 1.06
33.9 12.7 2.0 2.4 3.0 1.325
• For use with SS pipe• Gasket Klinger C4401 Thermoseal
Metalex Weld-on Mini-Tap (1.4401)
W [in.] H [in.] C [in.]
1.66 2.25 1.26
1.66 2.20 1.26
1.66 2.17 1.26
1.66 2.10 1.26
1.66 2.00 1.26
1.66 1.95 1.26
1.66 1.83 1.26
1.66 1.75 1.26
1.66 1.56 1.26
1.66 1.35 1.26
1.66 1.15 1.26
Metalex Strap-on Saddle (1.4401)W [in.]
H [in.]
o.d. min [in.]
o.d. max [in.]
5.5 7.0 2.35 2.56
5.5 7.0 2.44 2.91
6.0 7.5 2.97 3.54
7.0 8.0 3.74 4.55
8.0 10.0 4.74 5.63
9.5 10.5 5.94 6.70
12.0 12.75 7.69 8.72
15.0 14.5 10.64 12.12
17.0 17.0 12.62 14.32
• For use with SS pipe
W
H
o.d.
H
CW
Weld-on mini-tap
75D
DN
H
61
49
i.d.H
W
L
Met
als
108
MetalsFlow and pH
• Ready to install, studs and nuts in one package• These fittings are only available from your local Georg Fischer sales office
Multi/Saddle Plus Spatula for use with Iron Multi/Saddle Plus 201
Code No. Description
709 613 904 Spatula for saddle outlet 1¼
709 613 905 Spatula for saddle outlet 1½ / d40 + d50
• These fittings are only available from your local Georg Fischer sales office
Multi/Saddle Straps for use with Iron Multi/Saddle Plus 201
Code No. Strap Range [in.] DN min [mm]
DN max [mm]
709 613 930 2.375 3.25 60 80
709 613 932 2.75 3.625 70 90
709 613 934 3.625 4.375 90 110
709 613 936 4.375 5.25 110 130
709 613 938 5.25 6.00 130 150
709 613 940 5.75 6.625 145 165
709 613 942 6.375 7.25 160 180
709 613 944 7.00 7.75 175 195
709 613 946 7.625 8.375 190 210
709 613 948 8.25 9.00 205 225
709 613 950 8.75 9.625 220 240
709 613 952 9.375 10.25 235 255
709 613 954 10.00 10.75 250 270
709 613 956 10.75 11.625 270 290
709 613 958 11.375 12.25 285 305
709 613 960 12.00 12.75 300 320
709 613 962 12.625 13.375 315 335
709 613 964 13.375 14.25 335 355
• For use with 3-2552-2X/-3X, 3-2540-XX, 3-3719-11 Wet-Tap assembly with the 3-275X-WTX Wet-Tap electrode• Do not use these fittings for PE pipes• 1½ and 2 inch saddles must be applied for pipes DN80 or larger
Iron Multi/Saddle Plus 201
EPDM Code NBR Code Inch PN Water
PNGas Sensor Type
709 613 736 709 613 836 1.25 16.0 5.0 2552-2
709 613 738 709 613 838 1.50 16.0 5.0 2552-3, 2540-XX, 3719-11
109
3719
2552
2540
Multi/Saddle
Met
als
110
ElectrofusionFlow and pH
Electrofusion for PE pipes: Transition Saddles with Stainless 1¼ inch Outlet
Part No. Size [in.] Sensor Type
10004673 2.0 2552-1
10004686 3.0 2552-1
10004700 4.0 2552-1
10004717 6.0 2552-1
10004740 8.0 2552-1
Special request 10.0 2552-1 or -2
Special request 12.0 2552-1 or -2
1½ inch outlet
10004676 2.0 2552-3, 2540-XX, 3719-11
10004689 3.0 2552-3, 2540-XX, 3719-11
10004703 4.0 2552-3, 2540-XX, 3719-11
10004720 6.0 2552-3, 2540-XX, 3719-11
10004743 8.0 2552-3, 2540-XX, 3719-11
Special request 10.0 2552-3, 2540-XX, 3719-11
Special request 12.0 2552-3, 2540-XX, 3719-11
• Transition saddle with 1¼ FNPT branch/outlet• Transition saddle with 1½ FNPT branch/outlet• These fittings are only available from your local Georg Fischer sales office
111
3719
2552
2540
Electrofusion
Electrofusion for PE pipes: Transition Saddles with Stainless Outlet
L [in.] H [in.] d [in.]
3.6 3.18 N/A
4.6 3.18 N/A
6.26 3.8 N/A
8.68 4.96 N/A
5.92 2.96 N/A
Call Call N/A
Call Call N/A
3.6 3.18 N/A
4.6 3.18 N/A
6.26 3.8 N/A
8.68 4.96 N/A
5.92 2.96 N/A
Call Call N/A
Call Call N/A
Elec
tro-
Fusi
on
112
K-Factors
- K-Factors must be considered as approximate values
- The number of pulses per volumetric unit may vary depending on the medium and the installation
- For optimum performance, the system must be calibrated after installation
- Please contact VG Japan for JIS K-Factors
- Further information can be found on www.georgfischer.com or in the Georg Fischer Planning Fundamentals
113
K-Fa
ctor
s
K-Factors for Type 310, PVC-U for Socket Systems metric
Type 310 K-Factors
Code No. Code No. d DN Sensor 515/8510 2536/8512/2537 2551EPDM FPM [mm] [mm] Type pulse/litre pulse/litre pulse/litre721 310 006 721 310 036 20 15 Flow -X0 128.45 256.90 546.3721 310 007 721 310 037 25 20 Flow -X0 64.16 128.32 300.29721 310 008 721 310 038 32 25 Flow -X0 39.27 78.54 189.31721 310 009 721 310 039 40 32 Flow -X0 22.49 44.98 117.85721 310 010 721 310 040 50 40 Flow -X0 13.70 27.40 73.67721 310 011 721 310 041 63 50 Flow -X0 7.86 15.72 42.1
K-Factors for Type 312, PVC-U Clamp-on Saddle, metric
Type 312 SDR 21 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551[mm] [mm] Type pulse/litre pulse/litre pulse/litre
* 198 150 538 75 65 Flow -X0 4.757 9.787 23.729198 150 539 90 80 Flow -X0 3.525 7.281 17.715
* 198 150 540 110 100 Flow -X0 2.328 4.806 11.743* 198 150 543 160 150 Flow -X1 1.165 2.394 5.882
198 150 545 225 200 Flow -X1 0.554 1.141 2.845
Type 312 SDR 13.6 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551[mm] [mm] Type pulse/litre pulse/litre pulse/litre
198 150 538 75 65 Flow -X0 5.026 10.154 24.370198 150 539 90 80 Flow -X0 3.800 7.833 19.071198 150 540 110 100 Flow -X0 2.642 5.454 13.320198 150 543 160 150 Flow -X1 1.261 2.600 6.401
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX
* These K-Factors were derived from a formula. To obtain optimal K-Factors, you must calibrate the system.• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX
114
K-Factors for Type 312, PVC-U, Glue-on Saddle, metric
Type 312 SDR 21 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551[mm] [mm] Type pulse/litre pulse/litre pulse/litre
* 721 312 012 75 65 Flow -X1 5.479 11.238 27.196721 312 013 90 80 Flow -X1 3.582 7.394 17.978
* 721 312 014 110 100 Flow -X1 2.267 4.671 11.419
* 721 312 015 125 100 Flow -X1 1.932 3.969 9.690* 721 312 016 140 125 Flow -X1 1.526 3.137 7.681* 721 312 017 160 150 Flow -X1 1.165 2.394 5.882* 721 312 019 200 150 Flow -X1 0.740 1.520 3.762* 721 312 020 225 200 Flow -X2 0.582 1.196 2.973* 721 312 021 250 200 Flow -X2 0.469 0.963 2.403* 721 312 023 315 300 Flow -X2 0.292 0.599 1.513
Type 312 SDR 13.6 K-FactorsCode No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre721 312 012 75 65 Flow -X1 5.966 12.297 29.791
* 721 312 013 90 80 Flow -X1 3.854 7.953 19.365* 721 312 014 110 100 Flow -X1 2.402 4.895 11.942
721 312 015 125 100 Flow -X1 2.094 4.317 10.557721 312 016 140 125 Flow -X1 1.671 3.446 8.457721 312 017 160 150 Flow -X1 1.261 2.600 6.401
K-Factors for Type 310, PROGEF Standard, PP-H for Socket Fusion, metric
Type 310 K-Factors
Code No. Code No. d DN Sensor 515/8510 2536/8512/2537 2551
EPDM FPM [mm] [mm] Type pulse/litre pulse/litre pulse/litre
727 310 006 727 310 036 20 15 Flow -X0 127.23 251.75 579.32
727 310 007 727 310 037 25 20 Flow -X0 73.21 148.77 350.81
727 310 008 727 310 038 32 25 Flow -X0 37.30 77.04 194.76
727 310 009 727 310 039 40 32 Flow -X0 22.07 44.71 119.81
727 310 010 727 310 040 50 40 Flow -X0 13.54 27.45 72.66
727 310 011 727 310 041 63 50 Flow -X0 7.82 16.06 41.45
* These K-Factors were derived from a formula. To obtain optimal K-Factors, you must calibrate the system.• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX
115
K-Fa
ctor
s
K-Factors for Type 311, PROGEF Standard, PP-H, Wafer fitting, metric
Type 311 K-Factors
Code No. Code No. d DN Sensor 515/8510 2536/8512/2537 2551
EPDM FPM [mm] [mm] Type pulse/litre pulse/litre pulse/litre
727 311 012 727 311 042 75 65 Flow -X1 5.69 11.76 28.54
727 311 013 727 311 043 90 80 Flow -X1 3.65 7.49 18.20
727 311 014 727 311 044 110 100 Flow -X1 2.31 4.64 11.25
727 311 015 727 311 045 125 100 Flow -X1 2.06 4.26 10.43
727 311 016 727 311 046 140 125 Flow -X1 1.64 3.39 8.31
727 311 017 727 311 047 160 150 Flow -X1 1.25 2.59 6.37
727 311 018 727 311 048 180 150 Flow -X1 0.99 2.03 5.03
727 311 019 727 311 049 200 200 Flow -X1 0.80 1.64 4.07
727 311 020 727 311 050 225 200 Flow -X1 0.63 1.29 3.22
727 311 021 727 311 051 250 250 Flow -X2 0.51 1.04 2.61
727 311 022 727 311 052 280 250 Flow -X2 0.40 0.83 2.08
727 311 023 727 311 053 315 300 Flow -X2 0.32 0.65 1.64
• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX/X2-XX
K-Factors for PP-H Installation Fittings Type 312
Type 312 SDR 11 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551 [mm] [mm] Type pulse/litre pulse/litre pulse/litre
* 727 312 072 75 65 Flow -X1 6.54 13.46 32.59727 312 073 90 80 Flow -X1 4.26 8.80 21.42
* 727 312 074 110 100 Flow -X1 2.68 5.49 13.43* 727 312 075 125 100 Flow -X1 2.33 4.80 11.73* 727 312 076 140 125 Flow -X1 1.85 3.80 9.31
727 312 077 160 150 Flow -X1 1.40 2.89 7.10* 727 312 078 180 150 Flow -X2 1.11 2.29 5.65
727 312 079 200 200 Flow -X2 0.88 1.81 4.47727 312 080 225 200 Flow -X2 0.70 1.45 3.60727 312 081 250 250 Flow -X2 0.57 1.16 2.91727 312 082 280 250 Flow -X2 0.44 0.91 2.29727 312 083 315 300 Flow -X2 0.35 0.72 1.82
* These K-Factors were derived from a formula. To obtain optimal K-Factors, you must calibrate the system.• For use with P51530-X1/-X2, 3-2536-X1/-X2, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX
116
K-Factors for Type 318, PROGEF Standard, PP-H for Butt Fusion, metric
Type 318 K-Factors
Code No. Code No. d DN Sensor 515/8510 2536/8512/2537 2551
EPDM FPM [mm] [mm] Type pulse/litre pulse/litre pulse/litre
727 318 006 727 318 036 20 15 Flow -X0 127.23 251.75 579.32
727 318 007 727 318 037 25 20 Flow -X0 73.21 148.77 350.81
727 318 008 727 318 038 32 25 Flow -X0 37.30 77.04 194.76
727 318 009 727 318 039 40 32 Flow -X0 22.07 44.71 119.81
727 318 010 727 318 040 50 40 Flow -X0 13.54 27.45 72.66
727 318 011 727 318 041 63 50 Flow -X0 7.82 16.06 41.45
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-X0, 3-2551-X0
K-Factors for Type 310, SYGEF Standard for Socket Fusion, metric
Type 310 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
735 310 036 20 15 Flow -X0 111.19 218.56 514.26
735 310 037 25 20 Flow -X0 60.28 129.42 305.96
735 310 038 32 25 Flow -X0 36.12 74.92 197.91
735 310 039 40 32 Flow -X0 20.95 41.90 116.12
735 310 040 50 40 Flow -X0 11.49 22.98 65.77
735 310 041 63 50 Flow -X0 6.85 13.31 38.80
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX
117
K-Fa
ctor
s
K-Factors for SYGEF Standard, Type 311 metric and inch
Type 311 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
735 311 042 75 65 Flow -X1 5.25 10.84 26.33
735 311 043 90 80 Flow -X1 3.51 7.18 17.43
735 311 044 110 100 Flow -X1 2.00 3.99 9.65
735 311 045 125 100 Flow -X1 1.82 3.75 9.18
735 311 046 140 125 Flow -X1 1.44 2.97 7.30
735 311 047 160 150 Flow -X1 1.07 2.21 5.44
735 311 049 200 200 Flow -X1 0.68 1.41 3.49
735 311 050 225 200 Flow -X1 0.54 1.10 2.75
• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX
K-Factors for Type 318 SYGEF Standard for Butt fusion, metric
Type 318 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
735 318 036 20 15 Flow -X0 111.19 218.56 514.26
735 318 037 25 20 Flow -X0 60.28 129.42 305.96
735 318 038 32 25 Flow -X0 36.12 74.92 197.91
735 318 039 40 32 Flow -X0 20.95 41.90 116.12
735 318 040 50 40 Flow -X0 11.49 22.98 65.77
735 318 041 63 50 Flow -X0 6.85 13.31 38.80
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX
118
K-Factors for Type 310, ABS, metric
Type 310 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
729 310 007 25 20 Flow -X0 82.12 159.41 337.47
729 310 008 32 25 Flow -X0 42.00 80.05 192.00
729 310 009 40 32 Flow -X0 23.38 43.33 121.26
729 310 010 50 40 Flow -X0 14.08 26.89 70.31
729 310 011 63 50 Flow -X0 7.86 15.76 40.69
K-Factors for Type 312, ABS Glue-on, metric
Type 312 K-Factors
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
729 312 012 75 65 Flow -X1 5.58 11.27 27.57
* 729 312 013 90 80 Flow -X1 3.48 7.14 17.38
* 729 312 014 110 100 Flow -X1 2.29 4.40 10.81
729 312 016 140 125 Flow -X1 1.61 3.19 7.94
729 312 017 160 150 Flow -X1 1.24 2.45 6.12
729 312 019 200 200 Flow -X1 0.78 1.53 3.87
729 312 020 225 200 Flow -X1 0.63 1.22 3.10
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX,
* These K-Factors were derived from a formula. To obtain optimal K-Factors, you must calibrate the system.• For use with P51530-X1, 3-2536-X1, 3-8510-X1, 3-8512-X1, 3-2537-XC-X1, 3-2551-X1-XX
119
K-Fa
ctor
s
K-Factors for Stainless Steel Installation Fittings Type 314
Type 314 K-FactorsCode No. d emin emax Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] [mm] Type pulse/litre pulse/litre pulse/litre724 314 000 70.00 2.00 3.00 X0 5.59 11.55 27.98724 314 000 70.00 3.00 5.00 X0 6.14 12.69 30.76724 314 000 70.00 5.00 7.00 X0 7.02 14.50 35.15724 314 000 73.03 5.00 7.00 X0 6.34 13.09 31.74724 314 000 73.03 7.00 9.00 X0 7.26 14.99 36.35724 314 000 73.03 9.00 11.00 X0 8.39 17.34 42.04724 314 000 76.10 2.00 4.00 X0 4.80 9.92 24.06724 314 000 76.10 4.00 6.00 X0 5.40 11.15 27.06724 314 000 76.10 6.00 8.00 X0 6.12 12.64 30.66724 314 000 80.00 2.00 4.00 X0 4.31 8.89 21.59724 314 000 80.00 4.00 6.00 X0 4.81 9.94 24.13724 314 000 88.90 2.00 3.00 X0 3.34 6.91 16.80724 314 000 101.60 2.00 3.00 X0 2.52 5.20 12.67724 314 000 101.60 3.00 4.00 X0 2.63 5.42 13.21724 314 000 104.00 2.00 3.00 X0 2.40 4.95 12.07724 314 000 104.00 3.00 4.00 X0 2.50 5.15 12.57724 314 000 108.00 2.00 3.00 X0 2.21 4.57 11.15724 314 000 108.00 3.00 4.00 X0 2.30 4.75 11.59724 314 000 114.30 2.00 3.00 X0 1.96 4.05 9.90724 314 000 114.30 3.00 4.00 X0 2.04 4.20 10.27724 314 000 114.30 4.00 5.00 X0 2.12 4.37 10.67724 314 000 129.00 2.00 3.00 X0 1.52 3.14 7.69724 314 000 129.00 3.00 4.00 X0 1.57 3.24 7.95724 314 000 139.70 2.00 3.00 X0 1.29 2.66 6.52724 314 000 139.70 3.00 4.00 X0 1.33 2.74 6.72724 314 000 139.70 4.00 5.00 X0 1.37 2.82 6.92724 314 000 154.00 2.00 3.00 X0 1.05 2.17 5.33724 314 000 154.00 3.00 4.00 X0 1.08 2.22 5.47724 314 000 168.30 2.00 3.00 X0 0.87 1.80 4.44724 314 000 168.30 3.00 4.00 X0 0.89 1.84 4.55724 314 000 168.30 4.00 5.00 X0 0.92 1.89 4.66724 314 001 219.10 2.00 3.00 X1 0.50 1.04 2.58724 314 001 219.10 3.00 4.00 X1 0.51 1.06 2.63724 314 001 219.10 4.00 5.00 X1 0.52 1.08 2.68724 314 001 273.00 2.00 3.00 X1 0.32 0.66 1.65724 314 001 273.00 3.00 4.00 X1 0.32 0.67 1.67724 314 001 273.00 4.00 5.00 X1 0.33 0.68 1.70724 314 001 323.90 3.00 4.00 X1 0.23 0.46 1.18724 314 001 323.90 4.00 5.00 X1 0.23 0.47 1.19724 314 001 323.90 5.00 6.00 X1 0.23 0.48 1.21724 314 001 355.60 2.00 3.00 X1 0.18 0.38 0.96724 314 001 355.60 3.00 4.00 X1 0.19 0.38 0.97724 314 001 355.60 4.00 5.00 X1 0.19 0.39 0.99724 314 002 406.40 2.00 3.00 X2 0.14 0.29 0.74724 314 002 406.40 3.00 4.00 X2 0.14 0.29 0.74724 314 002 406.40 4.00 5.00 X2 0.14 0.29 0.75724 314 002 508.00 2.00 3.00 X2 0.09 0.18 0.47724 314 002 508.00 3.00 4.00 X2 0.09 0.18 0.47724 314 002 609.60 2.00 3.00 X2 0.06 0.12 0.32724 314 002 609.60 3.00 4.00 X2 0.06 0.12 0.33
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX
120
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 11; Pipe Series (S) = 5 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 6.58 13.57 32.88
XXX 314 000 90 80 Flow -X0 4.25 8.76 21.34
XXX 314 000 110 100 Flow -X0 2.66 5.41 13.18
XXX 314 000 125 100 Flow -X0 2.30 4.76 11.64
XXX 314 000 140 125 Flow -X0 1.83 3.77 9.25
XXX 314 000 160 150 Flow -X0 1.36 2.79 6.88
XXX 314 000 180 150 Flow -X0 1.10 2.27 5.60
XXX 314 001 200 200 Flow -X1 0.89 1.83 4.54
XXX 314 001 225 200 Flow -X1 0.70 1.44 3.58
XXX 314 001 250 250 Flow -X1 0.56 1.16 2.90
XXX 314 001 280 250 Flow -X1 0.45 0.92 2.31
XXX 314 001 315 300 Flow -X1 0.35 0.72 1.83
XXX 314 001 355 350 Flow -X1 0.27 0.56 1.44
XXX 314 002 400 400 Flow -X2 0.21 0.44 1.13
XXX 314 002 450 500 Flow -X2 0.17 0.34 0.89
XXX 314 002 500 500 Flow -X2 0.14 0.28 0.72
XXX 314 002 560 600 Flow -X2 0.11 0.22 0.58
XXX 314 002 630 600 Flow -X2 0.08 0.17 0.46
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 17; Pipe Series (S) = 8 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 5.46 11.28 27.38
XXX 314 000 90 80 Flow -X0 3.55 7.29 17.73
XXX 314 000 110 100 Flow -X0 2.24 4.53 11.01
XXX 314 000 125 100 Flow -X0 1.96 4.05 9.92
XXX 314 000 140 125 Flow -X0 1.56 3.22 7.91
XXX 314 000 160 150 Flow -X0 1.19 2.46 6.05
XXX 314 000 180 150 Flow -X0 0.94 1.93 4.78
XXX 314 000 200 200 Flow -X0 0.76 1.56 3.87
XXX 314 000 225 200 Flow -X0 0.60 1.23 3.06
XXX 314 001 250 250 Flow -X1 0.48 0.99 2.47
XXX 314 001 280 250 Flow -X1 0.38 0.78 1.97
XXX 314 001 315 300 Flow -X1 0.30 0.62 1.56
XXX 314 001 355 350 Flow -X1 0.23 0.48 1.23
XXX 314 001 400 400 Flow -X1 0.18 0.38 0.97
XXX 314 001 450 500 Flow -X1 0.14 0.29 0.76
XXX 314 002 500 500 Flow -X2 0.12 0.24 0.62
XXX 314 002 560 600 Flow -X2 0.09 0.19 0.49
XXX 314 002 630 600 Flow -X2 0.07 0.15 0.39
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX
The first 3 numbers are XXX. These fittings are available in the following materials.
721 --> PVC-U 735 --> PVDF727 --> PP 753 --> PE
121
K-Fa
ctor
s
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 21 ; Pipe Series (S) = 10 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 5.10 10.55 25.61
XXX 314 000 90 80 Flow -X0 3.32 6.80 16.54
XXX 314 000 110 100 Flow -X0 2.11 4.25 10.33
XXX 314 000 125 100 Flow -X0 1.86 3.84 9.39
XXX 314 000 140 125 Flow -X0 1.48 3.05 7.49
XXX 314 000 160 150 Flow -X0 1.13 2.33 5.74
XXX 314 000 180 150 Flow -X0 0.89 1.83 4.52
XXX 314 000 200 200 Flow -X0 0.72 1.48 3.67
XXX 314 000 225 200 Flow -X0 0.56 1.16 2.90
XXX 314 001 250 250 Flow -X1 0.45 0.94 2.34
XXX 314 001 280 250 Flow -X1 0.36 0.74 1.87
XXX 314 001 315 300 Flow -X1 0.28 0.58 1.48
XXX 314 001 355 350 Flow -X1 0.22 0.46 1.16
XXX 314 001 400 400 Flow -X1 0.17 0.36 0.92
XXX 314 001 450 500 Flow -X1 0.14 0.28 0.72
XXX 314 002 500 500 Flow -X2 0.11 0.22 0.59
XXX 314 002 560 600 Flow -X2 0.09 0.18 0.47
XXX 314 002 630 600 Flow -X2 0.07 0.14 0.37
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 33 ; Pipe Series (S) = 16 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 4.64 9.59 23.27
XXX 314 000 90 80 Flow -X0 3.03 6.20 15.06
XXX 314 000 110 100 Flow -X0 1.93 3.88 9.42
XXX 314 000 125 100 Flow -X0 1.72 3.55 8.70
XXX 314 000 140 125 Flow -X0 1.37 2.82 6.92
XXX 314 000 160 150 Flow -X0 1.04 2.15 5.29
XXX 314 000 180 150 Flow -X0 0.82 1.69 4.18
XXX 314 000 200 200 Flow -X0 0.66 1.37 3.39
XXX 314 000 225 200 Flow -X0 0.52 1.07 2.68
XXX 314 000 250 250 Flow -X0 0.42 0.87 2.17
XXX 314 001 280 250 Flow -X1 0.33 0.69 1.73
XXX 314 001 315 300 Flow -X1 0.26 0.54 1.37
XXX 314 001 355 350 Flow -X1 0.21 0.42 1.08
XXX 314 001 400 400 Flow -X1 0.16 0.33 0.85
XXX 314 001 450 500 Flow -X1 0.13 0.26 0.67
XXX 314 001 500 500 Flow -X1 0.10 0.21 0.54
XXX 314 002 560 600 Flow -X2 0.08 0.16 0.43
XXX 314 002 630 600 Flow -X2 0.06 0.13 0.34
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX
The first 3 numbers are XXX. These fittings are available in the following materials.
721 --> PVC-U 735 --> PVDF727 --> PP 753 --> PE
122
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 13.6; Pipe Series (S) = 6.3 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 5.96 12.30 29.84
XXX 314 000 90 80 Flow -X0 3.85 7.92 19.28
XXX 314 000 110 100 Flow -X0 2.42 4.89 11.92
XXX 314 000 125 100 Flow -X0 2.11 4.35 10.65
XXX 314 000 140 125 Flow -X0 1.68 3.46 8.48
XXX 314 000 160 150 Flow -X0 1.28 2.64 6.49
XXX 314 000 180 150 Flow -X0 1.01 2.08 5.13
XXX 314 000 200 200 Flow -X0 0.81 1.67 4.15
XXX 314 001 225 200 Flow -X1 0.64 1.32 3.28
XXX 314 001 250 250 Flow -X1 0.52 1.06 2.66
XXX 314 001 280 250 Flow -X1 0.41 0.84 2.12
XXX 314 001 315 300 Flow -X1 0.32 0.66 1.67
XXX 314 001 355 350 Flow -X1 0.25 0.52 1.32
XXX 314 001 400 400 Flow -X1 0.20 0.40 1.04
XXX 314 002 450 500 Flow -X2 0.15 0.32 0.82
XXX 314 002 500 500 Flow -X2 0.12 0.25 0.66
XXX 314 002 560 600 Flow -X2 0.10 0.20 0.53
XXX 314 002 630 600 Flow -X2 0.08 0.16 0.42
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 17.6; Pipe Series (S) = 8.3 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 5.38 11.12 27.00
XXX 314 000 90 80 Flow -X0 3.49 7.16 17.41
XXX 314 000 110 100 Flow -X0 2.21 4.45 10.83
XXX 314 000 125 100 Flow -X0 1.94 4.01 9.81
XXX 314 000 140 125 Flow -X0 1.54 3.19 7.82
XXX 314 000 160 150 Flow -X0 1.18 2.43 5.98
XXX 314 000 180 150 Flow -X0 0.93 1.91 4.72
XXX 314 000 200 200 Flow -X0 0.75 1.54 3.83
XXX 314 000 225 200 Flow -X0 0.59 1.21 3.02
XXX 314 001 250 250 Flow -X1 0.48 0.98 2.45
XXX 314 001 280 250 Flow -X1 0.38 0.77 1.95
XXX 314 001 315 300 Flow -X1 0.30 0.61 1.54
XXX 314 001 355 350 Flow -X1 0.23 0.48 1.21
XXX 314 001 400 400 Flow -X1 0.18 0.37 0.96
XXX 314 001 450 500 Flow -X1 0.14 0.29 0.75
XXX 314 002 500 500 Flow -X2 0.11 0.23 0.61
XXX 314 002 560 600 Flow -X2 0.09 0.18 0.49
XXX 314 002 630 600 Flow -X2 0.07 0.14 0.39
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XXThe first 3 numbers are XXX. These fittings are available in the following materials.
721 --> PVC-U 735 --> PVDF727 --> PP 753 --> PE
123
K-Fa
ctor
s
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 26 ; Pipe Series (S) = 12.5 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 Flow -X0 4.83 9.99 24.25
XXX 314 000 90 80 Flow -X0 3.16 6.47 15.72
XXX 314 000 110 100 Flow -X0 2.00 4.03 9.78
XXX 314 000 125 100 Flow -X0 1.78 3.67 8.99
XXX 314 000 140 125 Flow -X0 1.42 2.92 7.17
XXX 314 000 160 150 Flow -X0 1.08 2.23 5.50
XXX 314 000 180 150 Flow -X0 0.85 1.75 4.33
XXX 314 000 200 200 Flow -X0 0.69 1.41 3.51
XXX 314 000 225 200 Flow -X0 0.54 1.11 2.77
XXX 314 000 250 250 Flow -X0 0.44 0.90 2.25
XXX 314 001 280 250 Flow -X1 0.35 0.71 1.79
XXX 314 001 315 300 Flow -X1 0.27 0.56 1.41
XXX 314 001 355 350 Flow -X1 0.21 0.44 1.11
XXX 314 001 400 400 Flow -X1 0.17 0.34 0.877
XXX 314 001 450 500 Flow -X1 0.13 0.26 0.686
XXX 314 001 500 500 Flow -X1 0.10 0.21 0.561
XXX 314 002 560 600 Flow -X2 0.08 0.17 0.447
XXX 314 002 630 600 Flow -X2 0.06 0.13 0.354
K-Factors for plastic weld on Installation Fittings Type 314
Standard Dimension Ratio (SDR) = 41 ; Pipe Series (S) = 20 K-Factor
Code No. d DN Sensor 515/8510 2536/8512/2537 2551
[mm] [mm] Type pulse/litre pulse/litre pulse/litre
XXX 314 000 75 65 – – – –
XXX 314 000 90 80 – – – –
XXX 314 000 110 100 Flow -X0 1.87 3.76 9.11
XXX 314 000 125 100 Flow -X0 1.68 3.46 8.47
XXX 314 000 140 125 Flow -X0 1.33 2.75 6.75
XXX 314 000 160 150 Flow -X0 1.02 2.10 5.16
XXX 314 000 180 150 Flow -X0 0.80 1.65 4.07
XXX 314 000 200 200 Flow -X0 0.64 1.33 3.29
XXX 314 000 225 200 Flow -X0 0.51 1.04 2.60
XXX 314 000 250 250 Flow -X0 0.41 0.84 2.11
XXX 314 000 280 250 Flow -X0 0.32 0.67 1.68
XXX 314 001 315 300 Flow -X1 0.26 0.52 1.33
XXX 314 001 355 350 Flow -X1 0.20 0.41 1.05
XXX 314 001 400 400 Flow -X1 0.16 0.32 0.82
XXX 314 001 450 500 Flow -X1 0.12 0.25 0.65
XXX 314 001 500 500 Flow -X1 0.10 0.20 0.53
XXX 314 001 560 600 Flow -X1 0.08 0.16 0.42
XXX 314 002 630 600 Flow -X2 0.06 0.12 0.33
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XXThe first 3 numbers are XXX. These fittings are available in the following materials.
721 --> PVC-U 735 --> PVDF727 --> PP 753 --> PE
124
K-Factor for 2552 Magmeter
Standard Dimension Ratio (SDR) = 11 ; Pipe Series (S) = 5
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 212.3 263.1 405.8 34.79 862.43
90 3-2552- 209.6 260.4 403.1 24.22 1238.47
110 3-2552- 206.1 256.9 399.6 16.15 1857.96
125 3-2552- 203.4 254.2 396.9 12.53 2394.04
140 3-2552- 200.8 251.6 394.3 9.95 3013.95
160 3-2552- 197.2 248.0 390.7 7.64 3927.02
180 3-2552- 193.7 244.5 387.2 6.03 4974.41
200 3-2552- 190.2 241.0 383.7 4.88 6145.48
225 3-2552- 185.7 236.5 379.3 3.86 7778.94
250 3-2552- 181.4 232.2 374.9 3.12 9623.73
280 3-2552- 176.1 226.9 369.7 2.48 12077.13
315 3-2552- 169.9 220.7 363.5 1.96 15285.11
355 3-2552- 162.9 213.7 356.4 1.54 19421.25
400 3-2552- 155.0 205.8 348.5 1.22 24658.08
450 3-2552- 146.1 196.9 339.7 0.96 31201.46
500 3-2552- 137.3 188.1 330.9 0.78 38533.02
560 3-2552- 126.8 177.6 320.3 0.62 48372.54
630 3-2552- 114.4 165.2 307.9 0.49 61188.47
Standard Dimension Ratio (SDR) = 17 ; Pipe Series (S) = 8
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 214.2 265.0 407.7 29.86 1004.70
90 3-2552- 211.9 262.7 405.5 20.71 1448.25
110 3-2552- 208.9 259.7 402.5 13.84 2166.95
125 3-2552- 206.7 257.5 400.3 10.68 2809.67
140 3-2552- 204.5 255.3 398.0 8.51 3524.23
160 3-2552- 201.5 252.3 395.0 6.51 4604.95
180 3-2552- 198.5 249.3 392.0 5.15 5830.00
200 3-2552- 195.5 246.3 389.0 4.17 7199.36
225 3-2552- 191.7 242.5 385.2 3.29 9107.05
250 3-2552- 188.0 238.8 381.6 2.66 11269.60
280 3-2552- 183.5 234.3 377.1 2.12 14131.50
315 3-2552- 178.3 229.1 371.8 1.68 17883.56
355 3-2552- 172.2 223.0 365.8 1.32 22701.48
400 3-2552- 165.6 216.4 359.1 1.04 28863.36
450 3-2552- 158.1 208.9 351.6 0.82 36539.47
500 3-2552- 150.6 201.4 344.1 0.67 45099.00
560 3-2552- 141.6 192.4 335.1 0.53 56595.27
630 3-2552- 131.1 181.9 324.6 0.42 71612.16
125
K-Fa
ctor
s
K-Factor for 2552 Magmeter
Standard Dimension Ratio (SDR) = 21 ; Pipe Series (S) = 10
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 214.9 265.7 408.5 28.19 1064.02
90 3-2552- 212.8 263.6 406.4 19.55 1534.47
110 3-2552- 210.0 260.8 403.5 13.10 2290.68
125 3-2552- 207.9 258.7 401.5 10.11 2966.17
140 3-2552- 205.8 256.6 399.4 8.06 3722.90
160 3-2552- 203.0 253.8 396.5 6.17 4858.70
180 3-2552- 200.2 251.0 393.8 4.87 6160.71
200 3-2552- 197.4 248.2 390.9 3.95 7600.17
225 3-2552- 193.9 244.7 387.4 3.12 9623.73
250 3-2552- 190.5 241.3 384.0 2.52 11907.03
280 3-2552- 186.2 237.0 379.7 2.01 14915.30
315 3-2552- 181.4 232.2 374.9 1.59 18910.54
355 3-2552- 175.8 226.6 369.3 1.25 24021.97
400 3-2552- 169.4 220.2 362.9 0.98 30468.43
450 3-2552- 162.4 213.2 356.0 0.78 38590.21
500 3-2552- 155.4 206.2 349.0 0.63 47649.30
560 3-2552- 147.1 197.9 340.6 0.50 59803.57
630 3-2552- 137.3 188.1 330.9 0.40 75722.28
Standard Dimension Ratio (SDR) = 33 ; Pipe Series (S) = 16
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 216.0 266.8 409.6 26.06 1151.24
90 3-2552- 214.1 264.9 407.7 18.09 1658.57
110 3-2552- 211.6 262.4 405.1 12.10 2480.31
125 3-2552- 209.7 260.5 403.2 9.37 3203.38
140 3-2552- 207.8 258.6 401.4 7.45 4024.96
160 3-2552- 205.4 256.2 398.9 5.70 5266.15
180 3-2552- 202.8 253.6 396.4 4.50 6665.96
200 3-2552- 200.2 251.0 393.8 3.65 8212.95
225 3-2552- 197.2 248.0 390.7 2.88 10420.52
250 3-2552- 194.0 244.8 387.5 2.33 12857.50
280 3-2552- 190.2 241.0 383.8 1.86 16136.83
315 3-2552- 185.8 236.6 379.4 1.47 20421.44
355 3-2552- 180.8 231.6 374.4 1.16 25955.25
400 3-2552- 175.1 225.9 368.7 0.91 32939.86
450 3-2552- 168.9 219.7 362.5 0.72 41741.55
500 3-2552- 162.6 213.4 356.2 0.58 51540.13
560 3-2552- 155.0 205.8 348.6 0.46 64621.33
630 3-2552- 146.3 197.1 339.8 0.37 81824.55
126
K-Factor for 2552 Magmeter
Standard Dimension Ratio (SDR) = 13.6 ; Pipe Series (S) = 6.3
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 213.3 264.1 406.8 32.08 935.17
90 3-2552- 210.8 261.6 404.4 22.22 1350.21
110 3-2552- 207.6 258.4 401.2 14.82 2024.74
125 3-2552- 205.2 256.0 398.8 11.46 2617.53
140 3-2552- 202.8 253.6 396.3 9.13 3286.33
160 3-2552- 199.6 250.4 393.1 6.99 4294.16
180 3-2552- 196.3 247.1 389.8 5.53 5429.43
200 3-2552- 193.1 243.9 386.7 4.46 6721.56
225 3-2552- 189.0 239.8 382.6 3.53 8496.90
250 3-2552- 185.0 235.8 378.5 2.86 10499.95
280 3-2552- 180.2 231.0 373.7 2.28 13178.71
315 3-2552- 174.5 225.3 368.0 1.80 16671.48
355 3-2552- 168.0 218.8 361.6 1.42 21191.60
400 3-2552- 160.8 211.6 354.3 1.11 26918.09
450 3-2552- 152.7 203.5 346.2 0.88 34077.16
500 3-2552- 144.6 195.4 338.1 0.71 42079.42
560 3-2552- 134.9 185.7 328.4 0.57 52781.75
630 3-2552- 123.6 174.4 317.1 0.45 66836.41
Standard Dimension Ratio (SDR) = 17.6 ; Pipe Series (S) = 8.3
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 214.3 265.1 407.9 29.50 1017.05
90 3-2552- 212.2 263.0 405.7 20.40 1470.50
110 3-2552- 209.2 260.0 402.7 13.67 2194.15
125 3-2552- 207.0 257.8 400.5 10.56 2840.64
140 3-2552- 204.8 255.6 398.3 8.42 3564.68
160 3-2552- 201.8 252.6 395.3 6.44 4657.81
180 3-2552- 198.9 249.7 392.4 5.08 5904.36
200 3-2552- 195.9 246.7 389.4 4.12 7281.96
225 3-2552- 192.2 243.0 385.8 3.25 9227.89
250 3-2552- 188.5 239.3 382.1 2.63 11393.61
280 3-2552- 184.1 234.9 377.7 2.10 14305.14
315 3-2552- 178.9 229.7 372.5 1.66 18104.95
355 3-2552- 173.1 223.9 366.6 1.30 23009.69
400 3-2552- 166.4 217.2 359.9 1.03 29210.76
450 3-2552- 159.0 209.8 352.6 0.81 36986.20
500 3-2552- 151.7 202.5 345.2 0.66 45678.11
560 3-2552- 142.8 193.6 336.4 0.52 57313.50
630 3-2552- 132.5 183.3 326.0 0.41 72524.32
127
K-Fa
ctor
s
K-Factor for 2552 Magmeter
Standard Dimension Ratio (SDR) = 26 ; Pipe Series (S) = 12.5
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552- 215.5 266.3 409.1 26.98 1112.05
90 3-2552- 213.5 264.3 407.1 18.75 1599.80
110 3-2552- 210.9 261.7 404.5 12.51 2398.79
125 3-2552- 208.9 259.7 402.5 9.68 3099.83
140 3-2552- 206.9 257.7 400.5 7.72 3884.55
160 3-2552- 204.2 255.0 397.8 5.92 5070.74
180 3-2552- 201.7 252.5 395.2 4.66 6438.08
200 3-2552- 199.0 249.8 392.5 3.78 7942.48
225 3-2552- 195.7 246.5 389.3 2.98 10066.81
250 3-2552- 192.4 243.2 385.9 2.42 12420.94
280 3-2552- 188.5 239.3 382.0 1.92 15598.77
315 3-2552- 183.8 234.6 377.3 1.52 19720.03
355 3-2552- 178.5 229.3 372.1 1.20 25071.41
400 3-2552- 172.6 223.4 366.1 0.94 31839.17
450 3-2552- 166.0 216.8 359.6 0.74 40325.69
500 3-2552- 159.4 210.2 353.0 0.60 49792.02
560 3-2552- 151.5 202.3 345.1 0.48 62467.85
630 3-2552- 142.2 193.0 335.8 0.38 79043.81
Standard Dimension Ratio (SDR) = 41 ; Pipe Series (S) = 20
d Sensor “H Dim-1 Version”
“H Dim-2 Version”
“H Dim-3 Version”
2552K-Factor
Factory set 20 mA
[mm] Type mm mm mm pulse/litre litre/min
75 3-2552-
90 3-2552-
110 3-2552- 212.2 263.0 405.7 11.75 2553.36
125 3-2552- 210.3 261.1 403.9 9.11 3291.89
140 3-2552- 208.5 259.3 402.1 7.26 4130.35
160 3-2552- 206.1 256.9 399.7 5.55 5400.86
180 3-2552- 203.8 254.6 397.3 4.38 6849.51
200 3-2552- 201.4 252.2 394.9 3.55 8461.15
225 3-2552- 198.3 249.1 391.9 2.80 10709.89
250 3-2552- 195.2 246.0 388.8 2.27 13201.01
280 3-2552- 191.7 242.5 385.2 1.81 16583.85
315 3-2552- 187.5 238.3 381.0 1.43 21008.27
355 3-2552- 182.7 233.5 376.2 1.12 26679.70
400 3-2552- 177.2 228.0 370.8 0.89 33880.31
450 3-2552- 171.3 222.1 364.8 0.70 42919.99
500 3-2552- 165.2 216.0 358.7 0.57 52937.99
560 3-2552- 158.0 208.8 351.5 0.45 66460.46
630 3-2552- 149.6 200.4 343.1 0.36 84117.54
128
K-Factors for PVC Tees, SCH 80
PVC Tees, SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
MPV8T005 159 001 623 0.50 Flow -X0, pH -XX 520.12 1027.1 1027.1 2277.0
MPV8T007 159 001 624 0.75 Flow -X0, pH -XX 297.52 583.19 583.19 1407.6
MPV8T010 159 001 625 1.00 Flow -X0, pH -XX 172.07 335.53 335.53 861.17
MPV8T012 159 001 626 1.25 Flow -X0, pH -XX 91.54 178.79 178.79 464.91
MPV8T015 159 001 627 1.50 Flow -X0, pH -XX 62.22 121.42 121.42 331.43
MPV8T020 159 001 628 2.00 Flow -X0, pH -XX 36.32 71.44 71.44 192.89
K-Factors for CPVC Tees, SCH 80
CPVC Tees, SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
MCPV8T005 159 001 641 0.50 Flow -X0, pH -XX 520.12 1027.1 1027.1 2277.0
MCPV8T007 159 001 642 0.75 Flow -X0, pH -XX 297.52 583.19 583.19 1407.6
MCPV8T010 159 001 643 1.00 Flow -X0, pH -XX 172.07 335.53 335.53 861.17
MCPV8T012 159 001 644 1.25 Flow -X0, pH -XX 91.54 178.79 178.79 464.91
MCPV8T015 159 001 645 1.50 Flow -X0, pH -XX 62.22 121.42 121.42 331.43
MCPV8TO20 159 001 646 2.00 Flow -X0, pH -XX 36.32 71.44 71.44 192.89
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
K-Factors for PVC Tees, SCH 80
PVC Tees, SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
MPV8T005F 159 001 614 0.50 Flow -X0, pH -XX 520.12 1027.1 1027.1 2277.0
MPV8T007F 159 001 615 0.75 Flow -X0, pH -XX 297.52 583.19 583.19 1407.6
MPV8T010F 159 001 616 1.00 Flow -X0, pH -XX 172.07 335.53 335.53 861.17
MPV8T012F 159 001 617 1.25 Flow -X0, pH -XX 91.54 178.79 178.79 464.91
MPV8T015F 159 001 618 1.50 Flow -X0, pH -XX 62.22 121.42 121.42 331.43
MPV8T020F 159 001 619 2.00 Flow -X0, pH -XX 36.32 71.44 71.44 192.89
K-Factors for CPVC Tees, SCH 80
CPVC Tees, SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
MCPV8T005F 159 001 632 0.50 Flow -X0, pH -XX 520.12 1027.1 1027.1 2277.0
MCPV8T007F 159 001 633 0.75 Flow -X0, pH -XX 297.52 583.19 583.19 1407.6
MCPV8T010F 159 001 634 1.00 Flow -X0, pH -XX 172.07 335.53 335.53 861.17
MCPV8T012F 159 001 635 1.25 Flow -X0, pH -XX 91.54 178.79 178.79 464.91
MCPV8T015F 159 001 636 1.50 Flow -X0, pH -XX 62.22 121.42 121.42 331.43
MCPV8T020F 159 001 637 2.00 Flow -X0, pH -XX 36.32 71.44 71.44 192.89
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-X0-XX, 3-272X-XX
129
K-Fa
ctor
s
K-Factors for PVC Clamp-on Saddle
PVC Clamp-on Saddle, SCH 80 SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
PV8S020 159 000 637 2.00 Flow -X0, pH -XX 32.4800 66.7390 66.7390 193.8300
PV8S025 159 000 638 2.50 Flow -X0, pH -XX 21.8330 42.9940 42.9940 138.0100
PV8S030 198 150 577 3.00 Flow -X0, pH -XX 13.5410 26.6520 26.6520 83.8900
PV8S040 198 150 578 4.00 Flow -X1 7.6258 15.0060 15.0060 40.8800
PV8S060 198 150 579 6.00 Flow -X1 4.1623 8.3246 8.3246 22.5300
PV8S080 159 000 639 8.00 Flow -X1 2.3705 5.0164 5.0164 12.5200
PVC Clamp-on Saddle, SCH 40 SCH 40 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
PV8S020 159 000 637 2.00 Flow -X0, pH -XX 27.3500 54.7000 54.7000 180.0100
PV8S025 159 000 638 2.50 Flow -X0, pH -XX 18.8740 37.1590 37.1590 123.7200
PV8S030 198 150 577 3.00 Flow -X0, pH -XX 12.6380 23.6970 23.6970 75.8100
PV8S040 198 150 578 4.00 Flow -X1 6.7282 13.4560 13.4560 41.8700
PV8S060 198 150 579 6.00 Flow -X1 3.7297 7.4594 7.4594 19.7100
PV8S080 159 000 639 8.00 Flow -X1 2.1527 4.5292 4.5292 11.7300
• For use with P51530-X0/-X1, 3-2536-X0/-X1, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX, 3-272X-XX
K-Factors for PVC Glue-on Saddle
PVC Glue-on Saddle, SCH 80 SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2551
[inch] Type gpm gpm gpm
PV8S100 159 000 695 10.00 Flow -X2 1.5300 3.0600 7.9400
PV8S120 159 000 696 12.00 Flow -X2 1.0600 2.1600 5.7100
PVC Glue-on Saddle, SCH 40 SCH 40 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2551
[inch] Type gpm gpm gpm
PV8S100 159 000 695 10.00 Flow -X2 1.3500 2.8000 7.4300
PV8S120 159 000 696 12.00 Flow -X2 0.9600 1.9800 5.2300
• For use with P51530-X2, 3-2536-X2, 3-2551-X2-XX
130
K-Factors for Carbon Steel Threaded Tees with NPT Threads, SCH 40
Carbon Steel Threaded Tees K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
CS4T005 198 801 459 0.50 Flow -X0, pH -XX 370.2000 756.0000 756.0000 1572.6600
CS4T007 198 801 460 0.75 Flow -X0, pH -XX 212.0600 438.6900 438.6900 1086.7300
CS4T010 198 801 461 1.00 Flow -X0, pH -XX 141.1400 286.7800 286.7800 582.3400
CS4T012 198 801 462 1.25 Flow -X0, pH -XX 60.6550 121.2200 121.2200 377.4800
CS4T015 198 801 419 1.50 Flow -X0, pH -XX 45.3500 91.1390 91.1390 267.7900
CS4T020 198 801 463 2.00 Flow -X0, pH -XX 26.7670 54.4680 54.4680 167.8500
K-Factors for 316 SS (1.4401) Threaded Tee with NPT Threads and PVDF Insert, SCH 40
316 SS Threaded Tees K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
CR4T005 198 801 554 0.50 Flow -X0, pH -XX 358.9600 734.2000 734.2000 1601.2600
CR4T007 198 801 555 0.75 Flow -X0, pH -XX 202.6100 412.1000 412.1000 937.7800
CR4T010 198 801 556 1.00 Flow -X0, pH -XX 127.1400 252.7000 252.7000 606.1800
CR4T012 198 801 783 1.25 Flow -X0, pH -XX 61.9100 128.1200 128.1200 279.6800
CR4T015 198 801 784 1.50 Flow -X0, pH -XX 40.4100 77.3200 77.3200 147.6500
CR4T020 198 801 785 2.00 Flow -X0, pH -XX 22.3000 45.7800 45.7800 111.9000
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
131
K-Fa
ctor
s
K-Factors for Galvanized Iron Threaded Tee with NPT Threads and PVDF Insert, SCH 40
Galvanized Iron Threaded Tee K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
IR4T010 198 801 421 1.00 Flow -X0, pH -XX 104.5400 213.0100 213.0100 558.5000
IR4T012 198 801 422 1.25 Flow -X0, pH -XX 62.9790 127.7500 127.7500 334.4500
IR4T015 198 801 423 1.50 Flow -X0, pH -XX 46.6880 94.4010 94.4010 248.9700
IR4T020 198 801 424 2.00 Flow -X0, pH -XX 29.4590 59.4200 59.4200 146.000
K-Factors for Brass Threaded Tee with NPT Threads and PVDF Insert, SCH 40
Brass Threaded Tee K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
BR4T010 198 801 770 1.00 Flow -X0, pH -XX 104.5400 213.0100 213.0100 582.3400
BR4T012 198 801 771 1.25 Flow -X0, pH -XX 62.9790 127.7500 127.7500 330.5400
BR4T015 198 801 772 1.50 Flow -X0, pH -XX 46.6880 94.4010 94.4010 254.7600
BR4T020 198 801 773 2.00 Flow -X0, pH -XX 29.4590 59.4200 59.4200 157.3600
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
132
K-Factors for Copper Sweat-on Tee with PVDF Insert
Copper Sweat-on Tee, SCH K SCH K K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
CUKT005 198 801 687 0.50 Flow -X0, pH -XX 443.2100 917.8400 917.8400 2459.1900
CUKT007 198 801 688 0.75 Flow -X0, pH -XX 212.1600 428.2700 428.2700 1108.0200
CUKT010 198 801 689 1.00 Flow -X0, pH -XX 127.1800 256.4300 256.4300 649.8700
CUKT012 198 801 690 1.25 Flow -X0, pH -XX 88.2180 176.4400 176.4400 422.0300
CUKT015 198 801 691 1.50 Flow -X0, pH -XX 56.9620 115.6900 115.6900 281.4300
CUKT020 198 801 418 2.00 Flow -X0, pH -XX 29.3700 63.3850 63.3850 136.0200
Copper Sweat-on Tee, SCH L SCH L K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
CUKT005 198 801 687 0.50 Flow -X0, pH -XX 414.4100 858.2200 858.2200 2406.3000
CUKT007 198 801 688 0.75 Flow -X0, pH -XX 191.0900 385.7400 385.7400 1174.7700
CUKT010 198 801 689 1.00 Flow -X0, pH -XX 119.8400 241.6400 241.6400 672.2800
CUKT012 198 801 690 1.25 Flow -X0, pH -XX 85.4510 170.9000 170.9000 402.8400
CUKT015 198 801 691 1.50 Flow -X0, pH -XX 55.1600 112.0300 112.0300 294.9900
CUKT020 198 801 418 2.00 Flow -X0, pH -XX 28.6050 61.7400 61.7400 149.6300
K-Factors for 316 SS Weldolets with PVDF Insert, SCH 40
316 SS Weldolets K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
CR4W025 198 801 786 2.50 Flow -X0, pH -XX 18.8000 37.6000 37.6000 106.3100
CR4W030 198 801 787 3.00 Flow -X0, pH -XX 12.1700 24.3400 24.3400 72.2700
CR4W040 198 801 788 4.00 Flow -X0, pH -XX 6.9600 13.9200 13.9200 36.8400
CR4W050 198 801 789 5.00 Flow -X1 5.2600 10.8600 10.8600 29.2800
CR4W060 198 801 790 6.00 Flow -X1 3.6900 7.5200 7.5200 20.2900
CR4W080 198 801 791 8.00 Flow -X1 2.1300 4.3400 4.3400 11.7300
CR4W100 198 801 792 10.00 Flow -X2 1.3500 2.7600 - 7.4500
CR4W120 198 801 793 12.00 Flow -X2 0.9600 1.9400 - 5.2400
• For use with P51530-X0, 3-2536-X0, 3-8510-X0, 3-8512-X0, 3-2537-XC-X0, 3-2551-X0-XX, 3-272X-XX
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
133
K-Fa
ctor
s
K-Factors for Carbon Steel Weld-on Weldolets, SCH 40
Carbon Steel Weldolets K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
CS4W025 198 801 464 2.50 Flow -X0, pH -XX 18.8000 37.6000 37.6000 105.7000
CS4W030 198 801 557 3.00 Flow -X0, pH -XX 12.1700 24.3400 24.3400 70.6800
CS4W040 198 801 552 4.00 Flow -X0, pH -XX 6.9600 13.9200 13.9200 36.3800
CS4W050 198 801 465 5.00 Flow -X1 5.2600 10.8600 10.8600 29.2800
CS4W060 198 801 553 6.00 Flow -X1 3.6900 7.5200 7.5200 20.2900
CS4W080 198 801 574 8.00 Flow -X1 2.1300 4.3400 4.3400 11.7300
CS4W100 198 801 575 10.00 Flow -X2 1.3500 2.7600 - 7.4500
CS4W120 198 801 576 12.00 Flow -X2 0.9600 1.9400 - 5.2400
K-Factors for Brass Brazolet with PVDF Insert for Use with Copper Pipe, SCH 40
Brass Brazolet K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
BR4B025 198 801 794 2.50 Flow -X0, pH -XX 18.8000 37.6000 37.6000 117.3100
BR4B030 198 801 795 3.00 Flow -X0, pH -XX 12.1700 24.3400 24.3400 78.6200
BR4B030 198 801 796 4.00 Flow -X0, pH -XX 6.9600 13.9200 13.9200 45.1300
BR4B050 198 801 797 5.00 Flow -X1 5.2600 10.8600 10.8600 32.7900
BR4B060 198 801 798 6.00 Flow -X1 3.6900 7.5200 7.5200 22.7300
BR4B080 198 801 799 8.00 Flow -X1 2.1300 4.3400 4.3400 13.1400
BR4B100 198 801 800 10.00 Flow -X2 1.3500 2.7600 - 8.3400
BR4B120 198 801 801 12.00 Flow -X2 0.9600 1.9400 - 5.8700
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
134
K-Factors for Iron Strap-on Saddle
Iron Strap-on Saddle, SCH 80 SCH 80 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
IR8S020 198 801 425 2.00 Flow -X0, pH -XX 32.3600 64.7200 64.7200 194.8500
IR8S025 198 801 426 2.50 Flow -X0, pH -XX 22.2200 42.4800 42.4800 142.2800
IR8S030 198 801 427 3.00. Flow -X0, pH -XX 13.4200 26.4200 26.4200 87.5300
IR8S040 198 801 420 4.00 Flow -X0, pH -XX 7.6600 14.7000 14.7000 40.6200
IR8S050 198 801 429 5.00 Flow -X1 5.8600 12.1800 12.1800 29.2800
IR8S060 198 801 430 6.00 Flow -X1 4.0900 8.4400 8.4400 22.3000
IR8S080 198 801 431 8.00 Flow -X1 2.3300 4.9000 4.9000 12.5200
IR8S100 198 801 432 10.00 Flow -X2 1.5300 3.0600 - 7.9400
IR8S120 198 801 433 12.00 Flow -X2 1.0600 2.1600 - 5.6500
Iron Strap-on Saddle, SCH 40 SCH 40 K-Factors
Part No. Code No. Pipe Size Sensor 515/8510 2536/8512 2537 2551
[inch] Type gpm gpm gpm gpm
IR8S020 198 801 425 2.00 Flow -X0, pH -XX 26.8200 53.6400 53.6400 185.3500
IR8S025 198 801 426 2.50 Flow -X0, pH -XX 18.8000 37.6000 37.6000 127.4700
IR8S030 198 801 427 3.00 Flow -X0, pH -XX 11.9900 23.2200 23.2200 76.6200
IR8S040 198 801 420 4.00 Flow -X0, pH -XX 6.8500 13.2600 13.2600 40.2300
IR8S050 198 801 429 5.00 Flow -X1 5.3300 11.0400 11.0400 27.3200
IR8S060 198 801 430 6.00 Flow -X1 3.7600 7.2400 7.2400 19.7100
IR8S080 198 801 431 8.00 Flow -X1 2.1300 4.4000 4.4000 11.6100
IR8S100 198 801 432 10.00 Flow -X2 1.3500 2.8000 - 7.3600
IR8S120 198 801 433 12.00 Flow -X2 0.9600 1.9800 - 5.1800
K-Factors for Metalex Strap-on Saddle, SCH 40
Metalex Strap-on Saddle K-Factors
Part No. Code No. Pipe Size Sensor 525
[inch] Type gpm
P526-1020 159 000 484 2.00 P525-3, P525-3S 64.8080
P526-1025 159 000 485 2.50 P525-3, P525-3S 44.6850
P526-1030 159 000 486 3.00 P525-3, P525-3S 28.5790
P526-1040 159 000 487 4.00 P525-3, P525-3S 16.3020
P526-1050 159 000 488 5.00 P525-3, P525-3S 10.2370
P526-1060 159 000 489 6.00 P525-3, P525-3S 7.0057
P526-1080 159 000 490 8.00 P525-3, P525-3S 3.9641
P526-1100 159 000 491 10.00. P525-3, P525-3S 2.4960
P526-1120 159 000 492 12.00 P525-3, P525-3S 1.6894
• For use with P51530-X0/-X1/-X2, 3-2536-X0/-X1/-X2, 3-8510-X0/-X1, 3-8512-X0/-X1, 3-2537-XC-X0/-X1, 3-2551-X0-XX/-X1-XX/-X2-XX, 3-272X-XX
• For use with P525-3 and P525-3S only
135
K-Fa
ctor
s
K-Factors for Metalex Socket Weld Mini-Tap, SCH 40
Metalex Socket Weld Mini-Tap K-Factors
Part No. Code No. Pipe Size Sensor 525
[inch] Type gpm
P526-2005 198 840 501 0.50 P525-1, P525-1S 873.0300
P526-2007 198 840 502 0.75 P525-1, P525-1S 515.4100
P526-2010 198 840 503 1.00 P525-1, P525-1S 266.1700
K-Factors for Metalex Weld-on Mini-Tap, SCH 40
Metalex Weld-on Mini-Tap K-Factors
Part No. Code No. Pipe Size Sensor 525
[inch] Type gpm
P526-2012 159 000 494 1.25 P525-2, P525-2S 148.8400
P526-2015 159 000 506 1.50 P525-2, P525-2S 107.9800
P526-2020 159 000 495 2.00 P525-2, P525-2S 64.8080
P526-2025 159 000 496 2.50 P525-2, P525-2S 44.6850
P526-2030 159 000 497 3.00 P525-2, P525-2S 28.5790
P526-2040 159 000 498 4.00 P525-2, P525-2S 16.3020
P526-2050 159 000 499 5.00 P525-2, P525-2S 10.2370
P526-2060 159 000 500 6.00 P525-2, P525-2S 7.0057
P526-2080 159 000 501 8.00 P525-2, P525-2S 3.9641
P526-2100 159 000 502 10.00 P525-2, P525-2S 2.4690
P526-2120 159 000 503 12.00 P525-2, P525-2S 1.6894
d DN PVC-C Socket PE 80 Socket PE 100 Butt PP-R Butt
20 15 723600106 734600106 753608616 728608506
25 20 723600107 734600107 753608617 728608507
32 25 723600108 734600108 753608618 728608508
40 32 723600109 734600109 753608619 728608509
50 40 723600110 734600110 753608620 728608510
63 50 723600111 734600111 753608621 728608511
To install these union ends, please select an installation T-fitting in PVC-U, PP, PVDF and replace the original union end.
Union Ends
• For use with P525-1 and P525-1S only
• For use with P525-2 and P525-2S only
136
K-Factors for 3-2552-1X - X - XX and 3-2552-2X - X - XX Magmeters
Pipe Size (ANSI) Schedule OD
(Inches)WALL (Inches)
ID (Inches)
H Dim-1 Version
H Dim-2 Version
K-FactorPulse/Gal
Factory set 20 mA (GPM)
Inch Inch
2 40 2.375 0.15 2.07 8 16/32 10 16/32 174.83 171.6
80 2.375 0.22 1.94 8 15/32 10 15/32 198.68 151.0
2½ 40 2.875 0.20 2.47 8 14/32 10 14/32 122.54 244.8
80 2.875 0.28 2.32 8 12/32 10 12/32 138.42 216.7
3 40 3.500 0.22 3.07 8 12/32 10 12/32 79.36 378.0
80 3.500 0.30 2.90 8 10/32 10 9/32 88.82 337.8
3½ 40 4.000 0.23 3.55 8 10/32 10 10/32 59.34 505.6
80 4.000 0.32 3.36 8 8/32 10 8/32 66.01 454.5
4 40 4.500 0.24 4.03 8 8/32 10 8/32 46.09 651.0
80 4.500 0.34 3.83 8 6/32 10 5/32 51.03 587.9
5 40 5.563 0.26 5.05 8 4/32 10 4/32 29.33 1023
80 5.563 0.38 4.81 8 10 32.25 930.4
6 40 6.625 0.28 6.07 8 10 20.31 1477
80 6.625 0.43 5.76 7 28/32 9 28/32 22.51 1333
8 40 8.625 0.32 7.98 7 24/32 9 24/32 11.73 2558
80 8.625 0.50 7.63 7 20/32 9 20/32 12.85 2335
10 40 10.75 0.37 10.0 7 16/32 9 16/32 7.440 4032
80 10.75 0.59 9.56 7 11/32 9 11/32 8.170 3672
12 STD 12.75 0.38 12.0 7 10/32 9 10/32 5.187 5783
XHY 12.75 0.50 11.8 7 7/32 9 6/32 5.410 5545
14 30 14.00 0.38 13.3 7 6/32 9 6/32 4.255 7051
XHY 14.00 0.50 13.0 7 3/32 9 3/32 4.420 6787
16 30 16.00 0.38 15.3 7 9 3.212 9340
40/XHY 16.00 0.50 15.0 6 28/32 8 28/32 3.320 9036
18 STD 18.00 0.38 17.3 6 25/32 8 25/32 2.510 11950
XHY 18.00 0.50 17.0 6 22/32 8 22/32 2.585 11610
20 20/STD 20.00 0.38 19.3 6 18/32 8 19/32 2.016 14880
30/XHY 20.00 0.50 19.0 6 16/32 8 16/32 2.069 14500
22 20/STD 22.00 0.38 21.3 6 12/32 8 12/32 1.654 18136
30/XHY 22.00 0.50 21.0 6 9/32 8 9/32 1.694 17711
24 20/STD 24.00 0.38 23.3 6 6/32 8 6/32 1.382 21710
XHY 24.00 0.50 23.0 6 3/32 8 3/32 1.412 21246
137
K-Fa
ctor
s
K-Factors for 3-2552-1X - X - XX and 3-2552-2X - X - XX Magmeters
Pipe Size (ANSI) Schedule OD
(Inches)WALL
(Inches) ID (Inches) H Dim -1 Version
H Dim -2 Version
K-FactorPulse/Gal
Factory set 20 mA (GPM)
Inch Inch
26 STD 26 0.38 25.25 6 8 1.172 25606
20/XHY 26 0.50 25.00 5 28/32 7 28/32 1.195 25101
28 STD 28 0.38 27.25 5 25/32 7 25/32 1.006 29823
20/XHY 28 0.50 27.00 5 22/32 7 22/32 1.025 29278
30 STD 30 0.38 29.25 5 19/32 7 19/32 0.873 34361
20/XHY 30 0.50 29.00 5 16/32 7 16/32 0.888 33776
32 STD 32 0.38 31.25 5 12/32 7 12/32 0.765 39220
20/XHY 32 0.50 31.00 5 9/32 7 9/32 0.777 38595
34 STD 34 0.38 33.25 5 6/32 7 6/32 0.676 44401
20/XHY 34 0.50 33.00 5 3/32 7 3/32 0.686 43736
36 STD 36 0.38 35.25 5 7 0.601 49903
20/XHY 36 0.50 35.00 4 28/32 6 28/32 0.610 49198
38 STD 38 0.38 37.25 4 25/32 6 25/32 0.538 55727
XHY 38 0.50 37.00 4 22/32 6 22/32 0.546 54981
40 STD 40 0.38 39.25 4 19/32 6 19/32 0.485 61872
XHY 40 0.50 39.00 4 16/32 6 16/32 0.491 61086
42 STD 42 0.38 41.25 4 12/32 6 12/32 0.439 68338
XHY 42 0.50 41.00 4 9/32 6 9/32 0.444 67512
48 STD 48 0.38 47.25 3 25/32 5 25/32 0.335 89664
XHY 48 0.50 47.00 3 22/32 5 22/32 0.338 88717
54 STD 54.00 0.38 53.25 3 6/32 5 6/32 0.2634 113881
XHY 54.00 0.50 53.00 3 3/32 5 3/32 0.2659 112814
60 STD 60.00 0.38 59.25 2 19/32 4 19/32 0.2128 140990
XHY 60.00 0.50 59.00 2 15/32 4 16/32 0.2146 139802
66 STD 66.00 0.38 65.25 1 31/32 4 0.1754 170991
XHY 66.00 0.50 65.00 1 28/32 3 29/32 0.1768 169683
72 STD 72.00 0.38 71.25 1 12/32 3 13/32 0.1471 203883
XHY 72.00 0.50 71.00 1 9/32 3 10/32 0.1482 202455
78 STD 78.00 0.38 77.25 25/32 2 26/32 0.1252 239667
XHY 78.00 0.50 77.00 22/32 2 22/32 0.1260 238119
84 STD 84.00 0.38 83.25 6/32 2 6/32 0.1078 278343
XHY 84.00 0.50 83.00 3/32 2 3/32 0.1084 276674
90 STD 90.00 0.375 89.25 1 19/32 0.0938 319910
XHY 90.00 0.500 89.00 1 16/32 0.0943 318120
96 STD 96.00 0.375 95.25 1 0.0823 364369
XHY 96.00 0.500 95.00 29/32 0.0828 362459
102 STD 102.00 0.38 101.25 13/32 0.0729 411720
XHY 102.00 0.50 101.00 10/32 0.0732 409690
108 STD 108.00 0.38
XHY 108.00 0.50
120 STD 120.00 0.38
XHY 120.00 0.50
144 STD 144.00 0.38
XHY 144.00 0.50
138
K-Factors for 3-2552-3X - X - XX Magmeters
Pipe Size (ANSI) Schedule OD (Inches) WALL
(Inches) ID (Inches) H Dim mm-3X Version
K-FactorPulse/Gal
Factory set 20 mA (GPM)
Inch
2 40 2.375 0.15 2.07 16 5/32 174.83 171.6
80 2.375 0.22 1.94 16 3/32 198.68 151.0
2½ 40 2.875 0.20 2.47 16 122.54 244.8
80 2.875 0.28 2.32 16 138.42 216.7
3 40 3.500 0.22 3.07 15 31/32 79.36 378.0
80 3.500 0.30 2.90 15 29/32 88.82 337.8
3½ 40 4.000 0.23 3.55 15 29/32 59.34 505.6
80 4.000 0.32 3.36 15 27/32 66.01 454.5
4 40 4.500 0.24 4.03 15 28/32 46.09 651.0
80 4.500 0.34 3.83 15 25/32 51.03 587.9
5 40 5.563 0.26 5.05 15 24/32 29.33 1023
80 5.563 0.38 4.81 15 21/32 32.25 930.4
6 40 6.625 0.28 6.07 15 20/32 20.31 1477
80 6.625 0.43 5.76 15 16/32 22.51 1333
8 40 8.625 0.32 7.98 15 12/32 11.73 2558
80 8.625 0.50 7.63 15 8/32 12.85 2335
10 40 10.75 0.37 10.0 15 4/32 7.440 4032
80 10.75 0.59 9.56 14 30/32 8.170 3672
12 STD 12.75 0.38 12.0 14 30/32 5.187 5783
XHY 12.75 0.50 11.8 14 26/32 5.410 5545
14 30 14.00 0.38 13.3 14 26/32 4.255 7051
XHY 14.00 0.50 13.0 14 22/32 4.420 6787
16 30 16.00 0.38 15.3 14 19/32 3.212 9340
40/XHY 16.00 0.50 15.0 14 16/32 3.320 9036
18 STD 18.00 0.38 17.3 14 13/32 2.510 11950
XHY 18.00 0.50 17.0 14 10/32 2.585 11610
20 20/STD 20.00 0.38 19.3 14 6/32 2.016 14880
30/XHY 20.00 0.50 19.0 14 3/32 2.069 14500
22 20/STD 22.00 0.38 21.3 14 1.654 18136
30/XHY 22.00 0.50 21.0 13 29/32 1.694 17711
24 20/STD 24.00 0.38 23.3 13 26/32 1.382 21710
XHY 24.00 0.50 23.0 13 22/32 1.412 21246
139
K-Fa
ctor
s
K-Factors for 3-2552-3X - X - XX Magmeters
Pipe Size (Inch) Schedule OD (Inches) WALL
(Inches) ID (Inches) H Dim mm-3X Version
K-FactorPulse/Gal
Factory set 20 mA (GPM)
Inch
26 STD 26 0.38 25.25 13 19/32 1.172 25606
20/XHY 26 0.50 25.00 13 16/32 1.195 25101
28 STD 28 0.38 27.25 13 13/32 1.006 29823
20/XHY 28 0.50 27.00 13 10/32 1.025 29278
30 STD 30 0.38 29.25 13 6/32 0.873 34361
20/XHY 30 0.50 29.00 13 3/32 0.888 33776
32 STD 32 0.38 31.25 13 0.765 39220
20/XHY 32 0.50 31.00 12 29/32 0.777 38595
34 STD 34 0.38 33.25 12 26/32 0.676 44401
20/XHY 34 0.50 33.00 12 22/32 0.686 43736
36 STD 36 0.38 35.25 12 19/32 0.601 49903
20/XHY 36 0.50 35.00 12 16/32 0.610 49198
38 STD 38 0.38 37.25 12 13/32 0.538 55727
XHY 38 0.50 37.00 12 10/32 0.546 54981
40 STD 40 0.38 39.25 12 6/32 0.485 61872
XHY 40 0.50 39.00 12 3/32 0.491 61086
42 STD 42 0.38 41.25 12 0.439 68338
XHY 42 0.50 41.00 11 29/32 0.444 67512
48 STD 48 0.38 47.25 11 13/32 0.335 89664
54 STD 54.00 0.38 53.25 10 26/32 0.2634 113881
XHY 54.00 0.50 53.00 10 22/32 0.2659 112814
60 STD 60.00 0.38 59.25 10 6/32 0.2128 140990
XHY 60.00 0.50 59.00 10 3/32 0.2146 139802
66 STD 66.00 0.38 65.25 9 19/32 0.1754 170991
XHY 66.00 0.50 65.00 9 16/32 0.1768 169683
72 STD 72.00 0.38 71.25 9 0.1471 203883
XHY 72.00 0.50 71.00 8 29/32 0.1482 202455
78 STD 78.00 0.38 77.25 8 13/32 0.1252 239667
XHY 78.00 0.50 77.00 8 10/32 0.1260 238119
84 STD 84.00 0.38 83.25 7 26/32 0.1078 278343
XHY 84.00 0.50 83.00 7 22/32 0.1084 276674
90 STD 90.00 0.375 89.25 7 6/32 0.0938 319910
XHY 90.00 0.500 89.00 7 3/32 0.0943 318120
96 STD 96.00 0.375 95.25 6 19/32 0.0823 364369
XHY 96.00 0.500 95.00 6 16/32 0.0828 362459
102 STD 102.00 0.38 101.25 6 0.0729 411720
XHY 102.00 0.50 101.00 5 29/32 0.0732 409690
140
Service & Support
Quality & Environment SystemsWe are fully registered to ISO 9001 and ISO 14001 through Underwriters Laboratories Inc. under the scope of industrial instruments for measurement, display, and control of process variables, and related products. All assembly processes, calibration and test procedures are controlled through our Quality and Environmental Management System modelled to comply with ISO 9001 and ISO 14001. Our very culture is one of developing safe processes and procedures which continues to improve our systems, products, and environments.
Data Sheets/CatalogueFull product and application information is found in our published literature, now available in French and German languages as well as English. Full specifications for every product are provided with temperature/pressure graphs, a system overview to outline how parts fit together, an ordering matrix, and even application tips and dimensions are included. Additionally, the catalogue includes a system compatibility, a side-by-side product specification matrix, and a comprehensive technical reference section.
Technical SupportQualified technical support representatives are available at each of our sales companies to assist you with your product and application questions. Just contact our specialists on the telephone numbers or email address shown on the last page of this catalogue, or visit our website for supporting documentation. Visit www.gfsignet.com
Regulations, Approvals and CertificationElectronic products meet the requirements of European Directives where applicable: Electromagnetic Compatibility (EMC), Low Voltage (LV), Conformité Européenne (CE), Waste of Electrical and Electronic Equipment (WEEE), and Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS). Relevant products are also approved/listed by the Nationally Recognized Testing Laboratories (NRTLs) such as Underwriters Laboratories (UL), Factory Mutual (FM), and/or Intertek (ETL). Certificates areavailable upon request.
141
Info
rmat
ion
Info
rmat
ion
SpecialsAny non-catalogue product is classified as a “special request”. Should you require a sensor with an alternative material that is a non-molded item to suit your specific application requirement, or an additional cable length than provided with your product
of choice, we remain flexible to accommodate your needs. Contact your local sales company for further information.
TrainingGF Piping Systems offers comprehensive product and application training in numerous countries around the world. The Measurement & Control program covers detailed application examples for all products including Flow, pH/ORP, Turbidity, Chlorine, Conductivity/Resistivity, Pressure, Level
and Temperature measurement systems. Good practices are taught for installation and calibration of all products so users may obtain the most optimum performance from their measurement package. Contact your local sales company for further information.
WebsiteQuickly access a world of information easily by going to www.gfsignet.com. Whether you wish to print operation manuals (available in six languages) for installation and calibration, or a data sheet for specifications, or even an FAQ to answer that question you have been meaning to get answered, you will find it all here. Additionally, we list sales company
contact information, warranty statement, CAD drawings, Tech-Tips, copies of certificates, an Applications Library, Articles, and an easy-to-use K-Factor Calculator.
The Difference with GF Piping Systems:
Simplicity •
Reliability •
Economy •
Global Availability & Support •
Packaged Piping Systems Solutions •
Global Installation F
ittings and K-Factors
3-0000.706 (C-10/10) #1285 (10/10)©Copyright Georg Fischer Signet LLC.3401 Aerojet Avenue, El Monte, CA 91731-2882Tel (626) 571-2770, Fax (626) 573-2057Printed in U.S.A.
GF Piping Systems worldwide at homewww.gfsignet.com
Global Installation Fittingsand K-Factors
The technical data is not binding. They neither constitute expressly warranted characteristics nor guaranteed properties nor a guaranteed durability. They are subject to modification. Our General Terms of Sale apply. Adding Quality to People’s Lives
Our sales companies and representatives ensure local customer
support in over 100 countries.
K-Factor
GlobalArgentina / Southern South AmericaGeorg Fischer Central Plastics Sudamérica S.R.L.Buenos Aires, ArgentinaPhone +5411 4512 02 [email protected]
AustraliaGeorge Fischer Pty LtdRiverwood NSW 2210 AustraliaPhone +61(0)2 9502 8000 [email protected]
Austria Georg Fischer Rohrleitungssysteme GmbH3130 HerzogenburgPhone +43(0)2782 856 [email protected]
Belgium / LuxembourgGeorg Fischer NV/SA1070 Bruxelles/BrüsselPhone +32(0)2 556 40 [email protected]
BrazilGeorge Fischer Ltda04795-100 São PauloPhone +55(0)11 5525 [email protected]
CanadaGeorg Fischer Piping Systems LtdBrampton, ON L6T 4E3Phone +1(905)792 8005Fax +1(905)792 [email protected]
ChinaGeorg Fischer Piping Systems Ltd Shanghai Pudong, Shanghai 201319Phone +86(0)21 58 13 33 33 [email protected]
Denmark / IcelandGeorg Fischer A/S2630 TaastrupPhone +45 (0)70 22 19 [email protected]
FranceGeorg Fischer SAS95932 Roissy Charles de Gaulle CedexPhone +33(0)1 41 84 68 [email protected]
GermanyGeorg Fischer GmbH73095 Albershausen Phone +49(0)7161 [email protected]
IndiaGeorg Fischer Piping Systems Ltd400 076 MumbaiPhone +91 224007 [email protected]
ItalyGeorg Fischer S.p.A.20063 Cernusco S/N (MI)Phone +3902 921 [email protected]
NorwayGeorg Fischer AS1351 Rud Phone +47(0)67 18 29 [email protected]
PolandGeorg Fischer Sp. z o.o.05-090 Sekocin Nowy Phone +48(0)22 31 31 0 50 [email protected]
RomaniaGeorg Fischer Piping Systems Ltd020257 Bucharest - Sector 2Phone +40(0)21 230 53 [email protected]
RussiaGeorg Fischer Piping SystemsMoscow 125047Tel. +7 495 258 60 [email protected]
SingaporeGeorge Fischer Pte Ltd528 872 SingaporePhone +65(0)67 47 06 [email protected]
Spain / PortugalGeorg Fischer S.A.28046 MadridPhone +34(0)91 781 98 [email protected]
Sweden / FinlandGeorg Fischer AB117 43 StockholmPhone +46(0)8 506 775 00info.se.ps@georgfischer.comwww.georgfischer.sewww.georgfischer.fi
SwitzerlandGeorg Fischer Rohrleitungssysteme (Schweiz) AG8201 SchaffhausenPhone +41(0)52 631 30 [email protected]
TaiwanGeorg Fischer Piping SystemsSan Chung City, Taipei HsienPhone +886 2 8512 2822Fax +886 2 8512 2823www.georgfischer.tw
United Kingdom / IrelandGeorge Fischer Sales LimitedCoventry, CV2 2STPhone +44(0)2476 535 [email protected]
USA / CaribbeanGeorg Fischer LLCTustin, CA 92780-7258Phone +1(714) 731 88 00 Toll Free 800 854 40 [email protected]
International Georg Fischer Piping Systems (Switzerland) Ltd.8201 Schaffhausen/SwitzerlandPhone +41(0)52 631 30 03Fax +41(0)52 631 28 [email protected]
JapanGeorg Fischer Ltd556-0011 Osaka, Phone +81(0)6 6635 [email protected]
Korea Georg Fischer Piping Systems463824, South Korea Phone +82 (0)31 8017 1450~3Fax +82 (0)31 8017 1454 [email protected]
MalaysiaGeorge Fischer (M) Sdn. Bhd.40460 Shah Alam, Selangor Darul EhsanPhone +60 (0)3 5122 [email protected]
Mexico / Northern Latin AmericaGeorg Fischer S.A. de C.V.Apodaca, Nuevo LeonCP66636 MexicoPhone +52 (81)1340 8586Fax +52 (81)1522 [email protected]
Middle EastGeorge Fischer Piping Systems Dubai, United Arab Emirates Phone +971 4 289 49 60 [email protected]
NetherlandsGeorg Fischer N.V.8161 PA EpePhone +31(0)578 678 222 [email protected]